44 Nozzle Orientation Jobs

Inspect and verify tools, equipment, and materials. Ensure accuracy, quality, and safety compliance. Record findings and report discrepancies.

Piping Technician Working as Cadworx Technician or Designer and carrying out all 3D modelling /2D work using various modules and tools in Cadworx application. The ideal candidate will help in performing the 3D modelling work on various projects and delivering the plant 3D model and delivering the GA drawings and isometrics. Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required; Should be able to utilize and work in Cadworx efficiently Knowledge of Piping Design and Piping Study for tanks, Pumps, Vessel, Heat exchangers, compressors, Air cooler. Carry out GA extraction, dimensioning and annotation Modelling of various type of Equipment Modelling of civil structural and pipe supports Participate in the 3D model review sessions when required Review PIDs, PFDs, Vender drawings and instrument details and utilize these information in 3D modelling Preparation and checking of Equipment as well as Nozzle orientation Preparation of Plot Plan and Equipment layout Preparation of Piping General Arrangement and Support drawings Preparation of MTO for piping items Coordinate with other disciplines and utilize the information in building the 3D model. Check the drawings from other disciplines and provide comment as IDC process (Interdisciplinary Drawing Check) Provide civil information when required Prepare Piping Layout and other drawings in 2D Ability to work in flexible hours, occasionally more than working hours per week to meet client deadlines Candidate Specification : Able to carry out GA drawing extraction, dimensioning and annotation. Knowledge of Plant Layout, Piping GA, Nozzle Orientation, Bill of Material and Isometrics. Well conversant with all piping design aspect and working Piping discipline. Understanding of all piping components and valves including respective standards and dimensional details. Proficient in AutoCAD 2D for preparing 2D drawings. Knowledge and working experience in Plant3D,Aveva E3D, REVIT, SP3D will be added advantage. Experience in Oil and Gas, Petrochemical, Chemical, Power Plant or other process industry. Strong computer skill. Proficient in the use of Microsoft Office programs like Word, Excel, Outlook etc. Strong verbal, written communications skills in English. Requisite Qualification: Diploma or Certified Technician from ITI is preferred. Certification course on 3D modelling also would be an added advantage. We can offer (subject to Company s policy): Agile and safe working environment Competitive annual leave and sick leaves Group incentive scheme Group term life insurance, Workmen s compensation and Group medical insurance coverage Short and Long-term Global employment opportunities Global collaboration and knowledge sharing Digital Innovation and Transformation Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute. Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments. We embrace agility, flexibility and trust. Role: Foreman / Technician Industry Type: Engineering & Construction Department: Production,Manufacturing & Engineering Employment Type: Full Time, Permanent Role Category: Operations, Maintenance & Support Education UG: Any Graduate PG: Any Postgraduate

Developing Plot Plan in Auto-CAD for sulphuric acid &Gas Cleaning Plant Generating Plant Layout sectional elevation views in 2D, pipe & duct routing drawings as per PFD & P&ID’s Equipment Guide drawings shall be including MOC table,Nozzle,Desing Data Required Candidate profile Expert knowledge in Auto-CAD drafting,Knowledge in international codes and standards, Autodesk Inventor or any 3D software will be preferable understand PFD & P&ID’s Diploma in Mechanical Engineering

The officer will be a part of the confirmation drafting team for Foreign Exchange, Money Market, Equity Derivatives, Credit and Interest Rate Derivatives and Commodity trading (power, gas, oil, precious metals). Responsibilities Drafting Team: The Drafting team is responsible for ensuring that all BNP Paribas confirmations are Dispatched to clients i.e Interbank and Corporate Clients. The team covers a wide range of products traded by the Trading desks such as Vanilla products and the more complex Structured trades. The Drafting team is also responsible to perform final verification of the trade economics before dispatching the final confirmations to counterparts. The team works closely with other Trade Processing teams, legal teams and Front Office to ensure timely communication for any booking discrepancies, template issues and outstanding confirmations. Minimize operational failure, including but not exclusively the risk of fraud by helping to devise and by implementing sufficient regular controls Ensure appropriate escalation to management as soon as an issue is identified. Ensure that documentation controls are done daily, comments detailed clearly, and be responsible for reliability of records for EQD Derivatives Ensure set KPIs are met Play a Role in Project Management Contributing Responsibilities Continuous Control & Improvement: Continuous review of processes and controls ensuring we minimize the Operational Risk to BNP Paribas. Contribute to the Permanent Control framework Projects Participate to global projects related to any Documentation processes improvements. Play a key Role in Project Management Key results areas: Process Alignment Capacity to handle analysis/ continuous improvement/light touch projects Transversality of the global setup Technical & Behavioral Competencies Technical competencies : Fluent English ISDA definitions & templates Front to back workflow Risk Management Strong analytical skills Ability to innovate Strong team player and strong problem-solving mindset as well as client-oriented Advanced proficiency in Excel & presentations Behavioral Competencies : Organized & good resistance to stress Attention to detail Ability to prioritize workloads & use a proactive approach to meet deadlines Self-discipline & autonomy Adaptability & Change Management: Fungible resource who is ready to adapt Strong Client Focus: Client is at the center of all our concerns. Escalation & Reporting Effective escalation and consensus builder Specific Qualifications(if required) Experience in Documentation prefered (drafting /chasing/matching) Bachelor or Master Degree on Economics, Mathematics or Finance. Fluent in English (both oral and written communication) Skills Referential Behavioural Skills : Attention to detail / rigor Ability to deliver / Results driven Client focused Communication skills - oral & written Transversal Skills: Ability to set up relevant performance indicators Ability to understand, explain and support change Analytical Ability Ability to anticipate business / strategic evolution Ability to understand, explain and support change Education Level: Bachelor Degree or equivalent Experience Level At least 3 years

emew India Private Limited, a part of the global emew Corporation, is a leading innovator in clean technology solutions for sustainable metal recovery. At emew India, we are dedicated to delivering cutting-edge technologies for the efficient and environmentally responsible recovery of valuable metals. We are currently seeking a highly skilled and experienced AutoCAD Plant 3D Designer to join our plant engineering team. In this role, you will be responsible for developing detailed 3D models and designs of industrial plants, including piping, equipment, and structural elements, using Autodesk Plant 3D software. The ideal candidate will have a strong understanding of plant design principles, industry codes, and the ability to collaborate effectively with cross-functional engineering teams. Key Responsibilities: - Create and modify detailed 3D models of industrial plant components using AutoCAD Plant 3D. - Develop comprehensive 2D drawings from 3D models, including Piping & Instrumentation Diagrams (P&IDs), General Arrangement (GA) drawings, and isometric drawings. - Generate Bill of Materials (BOM) and Material Take-Off (MTO) reports directly from the 3D model. - Interpret and apply engineering specifications, vendor drawings, and other technical documents. - Participate in 3D model review sessions and incorporate feedback from various disciplines to optimize designs. - Ensure all designs comply with relevant industry standards and regulations. - Collaborate closely with cross-functional engineering teams throughout the project lifecycle. - Prepare and update project documentation, including drawing registers and technical reports. - Troubleshoot and resolve design-related issues, providing technical support as needed. - Stay updated on AutoCAD Plant 3D software advancements and industry best practices. - Assist in setting up new projects within Plant 3D and perform site visits for field verification. Qualifications: - Diploma or Bachelor's degree in Mechanical Engineering. - 3-7+ years of experience as an AutoCAD Plant 3D Designer in the industrial plant engineering sector. - Expert proficiency in Autodesk AutoCAD Plant 3D. - Strong understanding of piping design principles and various piping components. - Experience with 3D model review software such as Autodesk Navisworks. - Effective communication and interpersonal skills. - Proficiency in Microsoft Office Suite. Preferred Skills: - Experience with Plant 3D Spec Editor. - Understanding of civil, piping, electrical, and structural design principles. - Familiarity with local and international construction codes. - Experience with BIM concepts. To Apply: Interested candidates are invited to submit their resume and cover letter to prasad.rokade@emew.com with the subject line "AutoCAD Plant 3D Designer - [Your Name]". Early joining will be appreciated.,

We are seeking a Piping Draughtsman for a reputable engineering industry to create detailed piping layouts and routings, particularly for pharmaceutical projects. You will be responsible for making P&IDs from hand sketches and preparing piping isometrics. This role requires 2-3 years of experience with AutoCAD software, expertise in equipment placing and layout for pharmaceutical and API Plants , and familiarity with applicable codes and standards. Roles & Responsibilities: Piping Design & Layout : Be familiar with making Plot Layouts, including pipe rack routings. Demonstrate expertise in Piping Layout & Routing . Isometrics & Diagrams : Have experience in making Piping Isometrics for pharmaceutical plants. Be able to create PFD (Process Flow Diagram) and P&ID (Piping & Instrumentation Diagram) from hand sketches. Equipment & Facility Layout : Be an expert in Equipment Placing & Layout for pharmaceutical and API (Active Pharmaceutical Ingredient) Plants. Standards & Compliance : Preferably have familiarity with applicable Codes & Standards. Skills Required 2-3 years of experience in AutoCAD software for piping works of pharmaceutical projects. Expertise in Piping Layout , Piping Isometric , and Nozzle orientation . Knowledge of Utility Layouts and Pharma Piping . Ability to work in a consultancy environment. Strong AutoCAD Draughtsman skills, including AutoCAD 2D and Layout Planning . QUALIFICATION: Diploma in Mechanical Engineering or Piping Draughtsman Certification.

As a Designer at Biogas Engineering, your role involves creating detailed 2D drawings using AutoCAD software. You will be responsible for developing and updating P&ID drawings based on project specifications and engineering data. Additionally, you will be tasked with preparing various types of drawings such as BFD, PFD, P&ID, utility drawings, nozzle orientation & data sheet, equipment list, line list, valve list, and more. Your responsibilities will also include interpreting engineering sketches, redlines, and markups to incorporate changes into P&ID drawings. Collaboration with engineers, project managers, and other designers is essential to ensure accurate and timely completion of drawings. Effective communication with the design team is crucial to clarify design intent and maintain project documentation. Furthermore, you will be required to coordinate with other drafters and team members to ensure consistency in drawings. Conducting quality checks to meet industry standards and adhering to project deadlines are key aspects of this role. You will also assist in developing and maintaining P&ID drafting standards and best practices. Overall, as a Designer at Biogas Engineering, you will play a vital role in promoting the company's competitiveness in the global marketplace by delivering quality services of unmatched value and technical competence. Your contribution to the team's success through your drafting skills and attention to detail is crucial for the successful completion of projects.,

The ideal candidate should have hands-on experience in SP3D, PDMS, E3D, Microstation, and AutoCAD software. You should be experienced in Piping Design following ASME standards and possess knowledge of material and piping codes/standards. Your responsibilities will include designing piping, pipe support, and pipe layout, as well as coordinating with various engineering groups such as Process, Civil/Structural, Mechanical, Electrical, and Instrumentation to ensure seamless collaboration. You will also collaborate with Stress and Support Engineers for optimal design, perform vendor drawing reviews, and provide feedback as necessary. Additionally, you will be responsible for creating drawings using 2D CAD software, modeling clips on equipment, extracting and checking isometrics, preparing plot plans, nozzle orientation, platform drawings, structure details, and GAD's. A cooperative working attitude is essential for this role. In terms of work experience, the candidate must have proficiency in software tools such as SP3D, PDMS, E3D, MS Office, AutoCAD, Smart Plant Review, and Navisworks.,

About Us: emew India Private Limited is a part of the global emew Corporation, a leading innovator in clean technology solutions for sustainable metal recovery. emew India plays a vital role in delivering cutting-edge technologies for the efficient and environmentally responsible recovery of valuable metals. Job Summary: We are seeking a highly skilled and experienced AutoCAD Plant 3D Designer to join our plant engineering team. The ideal candidate will be responsible for developing detailed 3D models and designs of industrial plants, including piping, equipment, and structural elements, using Autodesk Plant 3D software. This role requires a strong understanding of plant design principles, industry codes, and the ability to collaborate effectively with cross-functional engineering teams. Key Responsibilities: Create and modify detailed 3D models of industrial plant components, including piping, equipment (pumps, vessels, heat exchangers, etc.), steel structures, and civil elements using AutoCAD Plant 3D. Develop comprehensive 2D drawings from 3D models, including Piping & Instrumentation Diagrams (P&IDs), General Arrangement (GA) drawings, isometric drawings, equipment layouts, and pipe support drawings. Generate Bill of Materials (BOM) and Material Take-Off (MTO) reports directly from the 3D model. Interpret and apply engineering specifications, P&IDs, vendor drawings, and other technical documents to ensure accurate and compliant designs. Participate in 3D model review sessions (e.g., using Navisworks) and incorporate feedback from various disciplines (process, mechanical, civil, electrical, instrumentation) to resolve clashes and optimize designs. Ensure all designs comply with relevant industry standards, codes, and regulations (e.g., ASME, ANSI, local Indian standards). Collaborate closely with process engineers, mechanical engineers, civil engineers, and other project stakeholders throughout the project lifecycle to ensure seamless integration of design elements. Prepare and update project documentation, including drawing registers, design change notices, and technical reports. Troubleshoot and resolve design-related issues, providing technical support and guidance as needed. Maintain up-to-date knowledge of AutoCAD Plant 3D software advancements, industry best practices, and new technologies in plant design. Assist in setting up new projects within Plant 3D, managing libraries, and catalogues. Perform site visits for as-built measurements and field verification as required. Qualifications: Diploma or Bachelor's degree in Mechanical Engineering. Proven experience (typically 3-7+ years) as an AutoCAD Plant 3D Designer in the industrial plant engineering sector (e.g., Oil & Gas, Petrochemical, Chemical, Power, Water Treatment). Expert proficiency in Autodesk AutoCAD Plant 3D, including 3D modelling, P&ID creation, isometric generation, and report extraction. Strong understanding of piping design principles, including pipe routing, support design, nozzle orientation, and material specifications. Familiarity with various piping components, valves, and their respective standards. Experience with 3D model review software such as Autodesk Navisworks, Inventor. Ability to read, interpret, and develop P&IDs, Process Flow Diagrams (PFDs), and other engineering schematics. Excellent attention to detail and a commitment to producing accurate and high-quality designs. Strong problem-solving and analytical skills. Effective communication and interpersonal skills, with the ability to collaborate effectively in a team environment. Ability to work independently and manage multiple tasks simultaneously to meet project deadlines. Proficiency in Microsoft Office Suite (Word, Excel, Outlook). Knowledge of other CAD software (e.g., AutoCAD 2D, MicroStation, PDMS, CAD Worx, SP3D) is a plus. Preferred Skills (Nice to Have): Experience with Plant 3D Spec Editor. Understanding of civil, piping, electrical and structural design principles for plant layouts. Familiarity with local International construction codes and regulations. Experience with BIM (Building Information Modelling) concepts. Benefits: List company benefits such as health insurance, paid time off, professional development opportunities, etc. To Apply: Interested candidates are invited to submit their resume and cover letter to prasad.rokade@emew.com. Please include "AutoCAD Plant 3D Designer - [Your Name]" in the subject line. Early joining will be appreciated.,

Wood India Engineering & Projects is looking for Senior Principal Engineer - Piping to join our dynamic team and embark on a rewarding career journeyLead the design, development, and implementation of complex engineering projects, ensuring that they are completed on time, within budget, and to the required quality standards.Provide technical guidance and mentorship to engineers and other technical staff, helping to build a high-performing team and supporting the development of individual team members.Collaborate with other departments, including product management, operations, and quality assurance, to ensure that engineering projects align with the company's overall strategy and goals.Evaluate and select technologies and tools for use in engineering projects, taking into account factors such as scalability, security, and performance.Oversee the testing and deployment of engineering projects, ensuring that they are thoroughly tested and meet all required specifications before release.Monitor and evaluate the performance of engineering projects, identifying opportunities for improvement and making recommendations for future enhancements.Experience leading a team of engineers, with strong leadership and management skills.Excellent communication and interpersonal skills.

You should have the capability to prepare all piping documents using 2D or 3D tools. As an independent designer, you will be responsible for working out plot plans, equipment layouts, and piping studies. It is essential to be proficient in navigating software such as Navisworks, Smart Plant Review, or equivalent tools. Your tasks will include creating plot plans, equipment layouts, piping route studies, piping isometrics, nozzle orientation, piping cleat drawings, and piping material take-offs (MTO) for both bulk and special items. You will need to report daily progress for yourself and the team if applicable, ensuring clash-free and error-free designs. Basic communication skills are required for building a successful team, delegating responsibilities, and handling conflict management. You should possess problem-solving and decision-making abilities, as well as the skills for coaching, facilitating change, and gaining commitment from team members. Additionally, you will be responsible for the closure of model review tags within one week and ensuring the implementation of all Inter Discipline Check (IDC) comments. Your role will also involve coaching team members to achieve high performance standards.,

Experience of Mechanical Engineering into Pharma Consulting Shall be able to prepare schematics for process, utility and gas generation and distribution systems. Required Candidate profile Preparation of layouts for space planning, pipe routing, process equipments and nozzle orientation, etc. Preparation of Isometric drawings, Construction drawings and sections. BOQ/MTO estimation.

PETROCON ENGINEERS AND CONSULTANTS is looking for PIPING DESIGNER, CHECKER, AND STRESS ENGINEER. to join our dynamic team and embark on a rewarding career journeyUsing computer-aided design (CAD) software, piping designers create detailed plans and specifications for piping systems, including material specifications, pipe sizes, routing, and valve locations.Piping designers review project specifications and requirements to ensure that designs meet client expectations and comply with relevant codes and standards.Piping designers conduct field surveys to gather information on existing piping systems and to identify potential design challenges.Piping designers prepare cost estimates for piping systems based on the proposed design, materials, and labor required for installation.

Role & responsibilities Will be responsible for preparing and checking 2D & 3D Modelling related to Piping Layout, Equipment layout, Isometric drawings etc. Prepare layout and design of complex offshore/onshore piping design systems using 2D and 3D software. Producing quality piping design layouts, layouts of various process skids, orientation of process equipment with nozzle locations and interconnecting piping Assist engineers and Senior designers in resolving piping Checking issues. Preferred candidate profile Proven ability to conduct layout and design for Offshore/Onshore Piping Systems. Knowledge of pipe and fittings, valves, and piping specialties. Ability to develop isometrics from orthographic drawing. Knowledge of the following modules in SP3D /Piping /ISO Draft

Role & responsibilities: Able to perform detail engineering and design of new piping installation. Prepare piping specification and pump specification inclusive of specifications for piping arrangement, piping support standards. To study scope of work, overall project schedule, basic design data, client specifications, drawings and plot plan. Experience in making piping design calculation like pipe sizing, wall thickness, pressure drop, pump head. Experience in preparation of P & ID. Experience in preparation and review of piping layout, manage to update drawings and deliverables. Preferred candidate profile: Design and Engineering of Piping systems preferred. Effectively deal with clients, class and vendors. Familiar with International rules and standards like ASME, API, etc. Preferably with minimum 5 years experience in onshore piping, mechanical design. Experience in 2D and 3D design tools. Perks and benefits: Shuttle Facility Group Medical & Accidental Insurance Certifications & Celebrations Healthy Work Environment

Position : Senior Piping Engineer - AutoCAD Plant 3D Experience : 8-15 Years Qualification : BE/B.Tech - (Mechanical/Production/Chemical) No. Of Positions : Multiple Job Location : Pune/Bangalore Required Skills & Experience: Should have minimum relevant experience of 8+ Years of experience as Piping Engineer. Should have experience in Chemicals/Petrochemicals/Biofuels industry or SKID based projects. Should have experience in piping engineering. Familiarity with Piping Codes & Standards. Should willing to work in Bangalore/Pune. Hands on Experience on Autocad Plant 3D is a must. Should have experience in 3D modelling of pipes, equipment, structure, cable trays, etc. Work Experience on international projects will be an added advantage. Responsibilities: Preparation & checking of Equipment Layout. Development & checking of piping layout. Preparation & checking of isometric drawings with bill of material. Preparation & checking of nozzle orientation. Extraction of Structural drawings. Preparation of valve and line list from P&IDs. Preparation of pipe supports General Arrangement Drawings. Vendor drawing reviews. Active participation in model reviews. Understanding of inter-disciplinary interfaces. Co-ordination and communication within Piping team. Please visit our company website for more details. www.Neilsoft.com

Career Area: Engineering : Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you'rejoining a global team who cares not just about the work we do but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don'tjust talk about progress and innovation here we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Role Definition Engineering support for Large Power Systems Products (Reciprocating Engines & Gensets) Manufacturing to ensure effective Built in Quality and technical issue resolution Responsibilities Engineering support for operations team during introduction and regular production of engines and gensets, support resolve issues from shop floor with high velocity Built in Quality engineering issue resolution and communication, document and review all issues with appropriate issue owners, working with cross functional team to implement design fixes/changes, Work with design control and platform team to resolve / approve any required deviations and PCNs working closely with other engine / genset design team members and other component teams, as well as validation engineers to determine component and pack configuration, design, detailing and problem resolution Participate in the design processes in a manner to ensure products provide superior performance, durability, quality, and serviceability Assisting supply specialists and buyers with supplier development and supplier performance. Overseeing the efforts of drafting and testing specialists. Participating in and supporting proposal preparation, cost estimates, and technical reports Understanding and adhering to project schedule Support CQMS, ISO 9001 and ISO 14001 documentation and audits, support and work in non-normal business hours as needed to work with global team Requires a degree in an accredited Mechanical / Electrical Engineering degree or equivalent, experience working in Power Systems (Reciprocating Engines / Genset) Product Development / Factory Support Requires Proficiency with ProE, TeamCenter, and other design / BOM management tools, knowledge of New Product Introduction and Current product issue resolution processes Requires Proficient communication skills Degree RequirementDegree requiredSkill DescriptorsAnalytical ThinkingKnowledge of techniques and tools that promote effective analysis; ability to determine the root cause of organizational problems and create alternative solutions that resolve these problems.Level Working KnowledgeApproaches a situation or problem by defining the problem or issue and determining its significance. Makes a systematic comparison of two or more alternative solutions. Uses flow charts, Pareto charts, fish diagrams, etc. to disclose meaningful data patterns. Identifies the major forces, events and people impacting and impacted by the situation at hand. Uses logic and intuition to make inferences about the meaning of the data and arrive at conclusions.Effective CommunicationsUnderstanding of effective communication concepts, tools and techniques; ability to effectively transmit, receive, and accurately interpret ideas, information, and needs through the application of appropriate communication behaviors.Level Working KnowledgeDelivers helpful feedback that focuses on behaviors without offending the recipient. Listens to feedback without defensiveness and uses it for own communication effectiveness. Makes oral presentations and writes reports needed for own work. Avoids technical jargon when inappropriate. Looks for and considers non-verbal cues from individuals and groups.Managing Multiple PrioritiesKnowledge of effective self-management practices; ability to manage multiple concurrent objectives, projects, groups, or activities, making effective judgments as to prioritizing and time allocation.Level Working KnowledgeRecognizes changing demands and priorities; validates changes with management. Obtains information about how current assignments contribute to organizational goals. Completes current work according to assigned priorities. Responds to day-to-day operational priorities while still making progress on project work. Performs at least 2-3 concurrent activities without reducing productivity.Technical ExcellenceKnowledge of a given technology and various application methods; ability to develop and provide solutions to significant technical challenges.Level Working KnowledgeProvides effective technical solutions to routine functional challenges via sound technical competence, effectively examining implications of events and issues. Effectively performs the technical job aspects, continuously building knowledge and keeping up-to-date on technical and procedural job components. Applies technical operating and project standards based on achieving excellence in delivered products, technologies and services. Applies current procedures and technologies to help resolve technical issues in one's general area of technical competence. Helps others solve technical or procedural problems or issues.Computer-Aided Design & EngineeringKnowledge of tools and techniques of specialized graphics programs; ability to produce, analyze, simulate and test product design drafts.Level Working KnowledgeGenerates specifications for parts or components with CAD software. Reuses design components via reusable libraries following standard procedures. Uses CAD to perform basic drafting such as wire frames, solid objects and array of objects. Performs routine changes to computerized schematics or drawings. Creates views of objects in 2 and 3 dimensions; creates perspective drawings and orthogonal views.Product Design - MFGKnowledge of processes, approaches, tools and techniques of product design; ability to convert customer and market requirements into product design.Level Working KnowledgeParticipates in the conception process of a manufacturing product vision. Collects and analyzes customer and market requirements, and generates reports. Utilizes design methods to implement the construction of a new design model. Uses automated tools to design or modify the design of a product. Assists in the testing and refinement of a new product design.Product Design and DevelopmentKnowledge of product features; ability to design, build, and develop a new product, technology, or service from concept through to production.Level Working KnowledgeBuilds three-dimensional models with basic materials. Communicates with professionals to understand various requirements of product design. Tests and evaluates alternative means of production being considered for use. Uses automated tools to design or modify the design of a product. Assists in building a complex prototype of product.This is intended as a general guide to the job duties for this position and is intended for the purpose of establishing the specific salary grade. It is not designed to contain or be interpreted as an exhaustive summary of all responsibilities, duties and effort required of employees assigned to this job. At the discretion of management, this description may be changed at any time to address the evolving needs of the organization. It is expressly not intended to be a comprehensive list of essential job functions as that term is defined by the Americans with Disabilities Act.

Career Area: Engineering : Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you'rejoining a global team who cares not just about the work we do but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don'tjust talk about progress and innovation here we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Role DefinitionEngineering Change Management and BOM Updates support for Large Power Systems Products (Reciprocating Engines & Gensets) Manufacturing Responsibilities Engineering support for the Change Management process to support Operations team during introduction and regular production of engines and gensets, and support resolve issues from shop floor with high velocity Perform / ensure accurate BOM updates or changes in CBS system at the facility per product engineering specs in coordination with Facility Change Coordination and Product Management teams Lead / Support key Change Management process steps that include - Receiving change notification requests (PACN / PLACN / EDS Notification/ Job Number), Reviewing and determining necessary change actions in the facility based on product checks, effectivity dates, etc., Implementing updates in the CBS systems following standard procedures, coordination with the Facility change coordination team and other relevant cross functional teams as required, managing further change actions to the established effective dates as required by working with the Manufacturing teams, etc. Document and maintain the change process and tools with metrics for review and support improvement opportunities Requires bachelors degree in mechanical engineering or equivalent, experience working on Power Systems Design / Development / Manufacturing processes, Proficiency in change management and tools like CBS, etc. Requires Proficiency with ProE, TeamCenter, and other design / BOM management tools, knowledge of New Product Introduction and Current product issue resolution processes Requires proficient communication and coordination skills Degree RequirementDegree required Skill DescriptorsAnalytical ThinkingKnowledge of techniques and tools that promote effective analysis; ability to determine the root cause of organizational problems and create alternative solutions that resolve these problems.Level Working KnowledgeApproaches a situation or problem by defining the problem or issue and determining its significance. Makes a systematic comparison of two or more alternative solutions. Uses flow charts, Pareto charts, fish diagrams, etc. to disclose meaningful data patterns. Identifies the major forces, events and people impacting and impacted by the situation at hand. Uses logic and intuition to make inferences about the meaning of the data and arrive at conclusions. Effective CommunicationsUnderstanding of effective communication concepts, tools and techniques; ability to effectively transmit, receive, and accurately interpret ideas, information, and needs through the application of appropriate communication behaviors.Level Working KnowledgeDelivers helpful feedback that focuses on behaviors without offending the recipient. Listens to feedback without defensiveness and uses it for own communication effectiveness. Makes oral presentations and writes reports needed for own work. Avoids technical jargon when inappropriate. Looks for and considers non-verbal cues from individuals and groups. Managing Multiple PrioritiesKnowledge of effective self-management practices; ability to manage multiple concurrent objectives, projects, groups, or activities, making effective judgments as to prioritizing and time allocation.Level Working KnowledgeRecognizes changing demands and priorities; validates changes with management. Obtains information about how current assignments contribute to organizational goals. Completes current work according to assigned priorities. Responds to day-to-day operational priorities while still making progress on project work. Performs at least 2-3 concurrent activities without reducing productivity. Technical ExcellenceKnowledge of a given technology and various application methods; ability to develop and provide solutions to significant technical challenges.Level Working KnowledgeProvides effective technical solutions to routine functional challenges via sound technical competence, effectively examining implications of events and issues. Effectively performs the technical job aspects, continuously building knowledge and keeping up-to-date on technical and procedural job components. Applies technical operating and project standards based on achieving excellence in delivered products, technologies and services. Applies current procedures and technologies to help resolve technical issues in one's general area of technical competence. Helps others solve technical or procedural problems or issues. Computer-Aided Design & EngineeringKnowledge of tools and techniques of specialized graphics programs; ability to produce, analyze, simulate and test product design drafts.Level Working KnowledgeGenerates specifications for parts or components with CAD software. Reuses design components via reusable libraries following standard procedures. Uses CAD to perform basic drafting such as wire frames, solid objects and array of objects. Performs routine changes to computerized schematics or drawings. Creates views of objects in 2 and 3 dimensions; creates perspective drawings and orthogonal views. Product Design - MFGKnowledge of processes, approaches, tools and techniques of product design; ability to convert customer and market requirements into product design.Level Working KnowledgeParticipates in the conception process of a manufacturing product vision. Collects and analyzes customer and market requirements, and generates reports. Utilizes design methods to implement the construction of a new design model. Uses automated tools to design or modify the design of a product. Assists in the testing and refinement of a new product design. Product Design and DevelopmentKnowledge of product features; ability to design, build, and develop a new product, technology, or service from concept through to production.Level Working KnowledgeBuilds three-dimensional models with basic materials. Communicates with professionals to understand various requirements of product design. Tests and evaluates alternative means of production being considered for use. Uses automated tools to design or modify the design of a product. Assists in building a complex prototype of product. This is intended as a general guide to the job duties for this position and is intended for the purpose of establishing the specific salary grade. It is not designed to contain or be interpreted as an exhaustive summary of all responsibilities, duties and effort required of employees assigned to this job. At the discretion of management, this description may be changed at any time to address the evolving needs of the organization. It is expressly not intended to be a comprehensive list of essential job functions as that term is defined by the Americans with Disabilities Act.

Technical Skills : Knowledge of piping materials & Specifications. Knowledge / Experience in PDS/PDMS. Area Layout Preparation & Development. Knowledge of Piping Design. Piping Stress Analysis. Lead the development, review, and optimization of piping designs for oil and gas facilities, ensuring adherence to industry standards, codes, and regulatory requirements. Management of CAD & 3D Modelling. Code Calculation. Checking Piping Design Models Perform stress analysis, material selection, and develop piping specifications for various projects. Team Management & Resource Acquisition. Manage and coordinate piping engineering aspects within multidisciplinary project teams, ensuring seamless integration of designs into overall project plans. Special Skills : Good Communication in English (Written & Spoken) Experience in Multi Discipline engineering environment. Provide technical guidance and mentorship to junior engineers, Designers and Draughtsman fostering their professional growth in piping engineering. Ensure that all piping designs comply with safety standards, environmental regulations, and industry codes.

Capability to prepare all piping documents using 2D or 3D tools. As an independent designer to workout plot Plan, Equipment Layout and Piping Study Ability to navigate Navisworks, Smart Plant Review or Equivalent software s. Plot Plan, Equipment Layout, Piping route study, Piping Isometrics, Nozzle orientation, Piping Cleat drawings, Piping MTO (Bulk and Special). To report Daily Progress for self and the Team if applicable. Clash free output Error Free Design Basic Communication skills Building a Successful Team Delegating Responsibility Closure of Model review Tags within one week. Ensure Implemenation of all IDC comments Coaching Conflict Mangament Problem Solving and Decision Making Ability Facilitating Change Gaining Commitment

Responsibilities: * Manage E3D database using SP3D software. * Collaborate with engineering teams on piping designs and layouts. * Create isometric drawings and plot plans. Health insurance

Create Piping Layout, Plans, Equipment Layouts, Piping BOM, Supports and Isometrics using AutoCAD 2D Collect data from sites and prepare drawing Understand PMS,VMS & P& ID. Proficiency in ADSK Plant3D/Cadworks software will be an added advantage. Provident fund

1. Proficiency in AutoCAD (knowledge of piping design is a plus). 2.Good understanding of engineering and technical drawings. 3. Strong attention to detail and problem-solving skills. 4. Ability to work in a team and meet deadlines.

Create Piping Layout, Plans, Equipment Layouts, Piping BOM, Supports and Isometrics using AutoCAD 2D Collect data from sites and prepare drawing Understand PMS,VMS & P& ID. Proficiency in ADSK Plant3D/Cadworks software will be an added advantage.

Neilsoft is a 1400+ people engineering services & solutions company addressing international clients in the AEC (Buildings / Infrastructure), Plant engineering, Energy / Water, Industrial machinery & equipment, and Transportation sectors. The company started operations in 1993 and is headquartered in Pune (India) with offices near London, Bad Soden, and Basel in Europe, and Chicago, Detroit, Los Angeles in the US. Neilsoft provides multi-disciplinary engineering services support to its clients leveraging a differentiated delivery model and has supported clients in projects across Europe, USA, Middle East, Asia, and India. Job Location : Pune Position : Junior Piping Engineer - E3D Experience : 3-6 Years Qualification : BE/B.Tech - (Mechanical/Production/Chemical) No. Of Positions : Multiple Required Skills & Experience: Should have minimum relevant experience of 2+ Years of experience as Piping Engineer. Should have experience in Chemicals/Petrochemicals/Biofuels industry or SKID based projects. Should have experience in piping engineering. Familiarity with Piping Codes & Standards. Should willing to work in Pune. Hands on Experience on E3D is a must. Should have experience in 3D modelling of pipes, equipment, structure, cable trays, etc. Work Experience on international projects will be added advantage. Responsibilities Preparation of Equipment Layout. Development of piping layout. Preparation of isometric drawings with bill of material. Preparation of nozzle orientation. Extraction of Structural drawings. Preparation of valve and line list from P&IDs. Preparation of General Arrangement Drawings. Basic understanding of inter-disciplinary interfaces. Please visit our company website for more details. www.Neilsoft.com