14 Network Analyzer Jobs

As a Microwave NMS Engineer at Computronics Systems (India) Private Limited in Bengaluru, you will be responsible for tasks related to circuit design, microwave engineering, RF design, spectrum analysis, and network analysis. You will play a key role in ensuring the efficiency and effectiveness of the network management systems. To excel in this role, you should possess strong Circuit Design and RF Design skills, along with expertise in Microwave Engineering. Your proficiency in Spectrum Analyzer and Network Analyzer skills will be crucial for analyzing and optimizing network performance. Previous experience in working with network management systems will be beneficial in fulfilling the responsibilities of this position. Your problem-solving and analytical skills will be put to the test as you troubleshoot and resolve issues related to microwave technologies. A Bachelor's degree in Electrical Engineering or a related field is required for this role, along with relevant certifications in microwave or RF technologies. If you are passionate about working with cutting-edge technologies and driving innovation in the telecommunications industry, this role at Computronics Systems (India) Private Limited presents an exciting opportunity to contribute to the company's mission of enhancing the way the world works and lives.,

Job Overview As a manager in the Signal Integrity team you will lead the SI engineers focusing on aspects of electrical design, simulation, and verification-validation testing of high speed products in the connector and/or cable assembly, radio system industrytargeting high speed communications and connectivity within datacenters and wireless infrastructure. You will be expected to drive development teams in the areas of signal integrity for product and system design including modeling, simulation, testing and circuit board layout. You will work collaboratively within a broader cross functional team of mechanical, manufacturing, & operations to execute leading edge products designs. You will assign resources to work on the signal integrity performance of a product/platform beginning with the initial analysis through prototype fabrication & evaluation, and production verification testing. You will be expected to coordinate to drive the advancement of simulation tools and capabilities, identifying potential areas of process improvement, and solving complex problems and ensuring product development success. Responsibilities: Align the technology roadmap with front end / customer, and implement accordingly Familiar with signal integrity design, simulation and validation activities through product development cycles Coordinate to define signal integrity design performance/functional requirements for new products by closely engaging with front teams / lead customers Guide the team to preform signal integrity simulations for multiple high-speed standards on each product, including determining the correct simulation methodology, as well as a good understanding of the criteria for each interface. Driving product development for business success Engaging in innovative simulation and test tool improvement and process enhancement Driving best practices and efficiency in connector design and component qualifications from a signal integrity standpoint. Being a mentor and teacher to other engineers across disciplines / BUs, writes and presents technical papers at internal and external conferences. Being an expert in analyzing competitive products and driving internal & competing IP positions Mandate Skills: Bachelors degree in electrical engineering or equivalent work experience; Masters degrees highly recommended Minium of 10 years of relevant work experience in electrical design, RF design, or PCB design, with 3+ years managerial experience in leading an electrical or SI engineering team Familiar with signal integrity analysis tools (Agilent ADS, Ansys HFSS, CST, or equivalent tools) A solid understanding of electromagnetic theory and electrical circuit behavior Good analytical capabilities to interpret simulation and lab data to identify issues and provide guidance to team to fix identified problem. Familiarity with printed circuit board design, fabrication and assembly. Fluent in English (both verbal and written) to facilitate global communication both internally and with external customers. Strong background to work in a global environment able to accommodate varying time zones and capable of collaborating with individuals across geographies. Ability to, and experience with, teaching and training peers in applying software tools and methodologies, and in the use of electrical test equipment, including VNAs and TDRs Individual must be highly motivated, a quick learner, and able to work independently Nice to have Skills: Experience with interconnect design, including socket/connector/cable/cable assembly design (high-speed twinax cables, direct attach copper (DAC) cables), and/or RF antenna, RF sub-system Design experience with communication systems (high-speed servers, switches, routers, storage, antennas, RF front end or similar systems) Solid presentation skills with an ability to clearly communicate technical concepts to diverse audiences in English Strong organizational and time management skills with an ability to manage and execute multiple tasks/deadlines/projects simultaneously with limited direction. Printed circuit board design, fabrication and assembly (Altium, AutoCAD) Test equipment (oscilloscope, vector network analyzer, BERT) Signal conditioning techniques (equalization, amplification) Direct customer design and support experience Application and test knowledge of high-speed devices and equalization techniques

Job Area: Engineering Group, Engineering Group > Systems Engineering General Summary: We are seeking a highly motivated Test Engineer to join our XR research team. The role involves validating multimedia content transmission (audio/video) over wireless/wired networks, ensuring performance, stability, and interoperability across devices and platforms. Key Responsibilities: Design and execute test plans for streaming over wireless/wired network. Validate synchronization, latency, jitter, and throughput under various network conditions. Use tools such as sniffers, protocol analyzers, and automation frameworks to capture and analyze traffic. Collaborate with development teams to debug and resolve issues. Conduct interoperability testing with third-party devices. Maintain test beds and simulate real-world usage scenarios. Document test results, file bugs, and track issues to closure. Required Skills: Good understanding of Wi-Fi protocols and multimedia streaming standards. Experience with network analyzer tools like Wireshark, iPerf, etc. Familiarity with audio/video codecs, streaming formats, and synchronization techniques. Hands-on experience with Windows/Android/Linux-based test environments. Excellent scripting skills (Python preferred) for test automation and log analysis. Strong communication skills, ability to collaborate with cross-functional teams. Preferred Qualifications: Knowledge of Bluetooth/Wi-Fi coexistence testing is a plus. Knowledge of XR technologies is a plus. Experience in leading a technical team. Minimum Qualifications: Bachelors degree in engineering, Computer Science, or a related field with 10+ years of related work experience. OR Masters degree in engineering, Computer Science, or a related field with 8+ years of related work experience. Keywords: Python, Wi-Fi, Multimedia, Test Automation Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 4+ years of Systems Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 3+ years of Systems Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field and 2+ years of Systems Engineering or related work experience. Applicants Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers.

Responsibilities Perform RF design development and testing at both board and system level meeting 3GPP, customer desense/coexistence, and major EMC regulatory+ US carrier OTA approval requirements. Work with USI functional lead to address RF issues and perform follow-up debugging for resolution. Skills & Technology Proficient in RF matching tuning, RF bring up, calibration, validation testing for smart phone type products, particularly with 5G NR ENDC, Wi-Fi6, BT, GNSS, NFCetc. Experienced in 5G sub-6 wireless test equipment and their automation tools such as ATS with Anritsu MT8000/MT8820C/MT8870, TA/RA with Keysight UXM. Knowledge of general RF equipment operation for Network Analyzer, Spectrum Analyzer, Signal Generator etc. and practical usage of schematic and layout design tools such as Allegro and OrCAD. Familiar with QCT 5G platform and QDART development tool with hands on experience for single band/ENDC/SA calibration and connection testing verification. Qualifications Bachelor of Science degree in Engineering or a related field, or equivalent practical experience. Strong command of English, both written and spoken. Independent, adaptable, capable of multitasking in development.

1. Define/complete test plan and validationof of RF performance for products, debug/fix issue and track status 2. Test data analysis and generate report according to request 3. Coordinate projects technical issue with clients, be able to summarize and provide clear problem statements with data and details. 4. Draft testing SOP, RF technical standard and regulation research.

- Responsible for designing RF product test program - According to the requirement of R & D Test, build the test platform, debug and analyze the abnormal situation in the test process - For defective products, assist to build a test analysis platform, analysis and positioning problems - Need validate the testing automation to make sure test correctly, feedback testing issuesRole & responsibilities

We are hiring for US based MNC and job location is Bangalore Interested candidates can directly share CV at pratibha@myndsol.com mentioning the job title in the subject line. Looking for immediate joiners Job Title - Technical Support Application Engineer The role is part of the KeysightCare Customer Support Organization, delivering post-sales customer support directly to key customers and strategic partners. The KeysightCare Technical Support Application Engineer is a key player in the customer value-chain and you are critical in supporting our customers technical problems. We are looking for an experienced RF&W Component Test application/product specialist engineer who can demonstrate a broad knowledge of instrumentation, applications and technologies. You will develop to get the go to knowledge expert within KeysightCare and will engage with customer and partners across EMEAI to deliver post-sales customer support. You will be a key contributor to the KeysightCare EMEAI regional strategy and will work across KeysightCare to lead projects requiring coordination with other functions, customers, third parties. The successful candidate must demonstrate a real passion for customer success and enjoy taking on complex technical challenges working in a customer facing deep technical environment. Responsibilities include: - Engage with customers, sales and/or service representatives across EMEAI to deliver post-sales customer support, solving technical questions of varied scope and complexity. - Manage day to day operations and workload expectations autonomously. - Share technical expertise across the EMEAI team and write deep technical articles for the customer knowledgebase - Close cooperation with the Keysight product and software and solution centres. The technical support application engineer is the technical interface between the customers and the Keysight Worldwide support team. - Take proactive actions while interacting with customers in terms of solving current questions or addressing potential future needs. - Deliver Getting Started and Start Up Assistance to customers remote and onsite. - Develop into the Component Test knowledge expert within KeysightCare for products and solutions Job Qualifications: - Bachelor and/or Masters degree in Electronic and Communication Engineering. - Typically, 5-8 years relevant experience working in Vector Network Analysis, Impedance Analysis and DC Device Parameter Analysis. - Is familiar with calibration techniques, like SOLT, TRL, De-embedding in coax, waveguide and on-wafer. - Brings experience of testing passive and active components from filters to high power amplifier or mixers with VNAs. - Solid understanding of modern VNA measurements beyond S-Parameters like, gain compression, IMD, Noise Figure. - Requires in-depth technical knowledge and experience in job and ability to work independently. Solid understanding of RF/W fundamentals with practical experience using RF/W test equipment. - Solid understanding of the generation, demodulation and analysis of digital communication signals. - Advanced instrument programming skills with SCPI and instrument drivers with C++, C#, VEE, LabView, Python, MATLAB or VB, is an advantage. - Strong organisational skills, ability to multi-task, prioritise and work well under pressure. - A strong level of English written and Oral is essential for this role. - Extra languages are an advantage. - Understands the local market, customer needs and dynamics, strong communicator who can positively interact with customers. Interested candidates can directly share CV at pratibha@myndsol.com mentioning the job title in the subject line.

As an innovative telecommunication company, we are currently looking for a RF Product Engineer to be a valuable addition to our Product engineering team. Your role will involve various responsibilities including the transition of products from development to production, providing support and training to subcontractors" production lines, leading and implementing DFXs methods, offering ECO and Zero Series SPC support, preparing and escorting Z.S & R.U documentation for SMT and test stations, managing yield responsibility, qualifying follow-ups, and driving corrective and preventative actions. You will also be required to make periodic visits to production facilities. To qualify for this position, you must have a BSC in Electrical Engineering and possess solid knowledge and experience in RF, including NF, IP3, RL, etc. Additionally, you should have expertise in antenna and RF passive components, be proficient in operating RF Test Equipment such as Spectrum Analyzer, Signal Generator, Power Meter, Network Analyzer, and have experience in writing technical documents in English. Excellent communication skills in verbal and written English are a must, along with the ability to work independently and creatively. Ideally, you should have experience in providing technical support for the introduction of new products into manufacturing, collaborating with Manufacturing, Quality, Process Engineering, and Maintenance teams on product-related issues, resolving technical challenges in production, understanding engineering processes and PDM software, and being a team player with strong technical and communication skills. If you are a qualified and driven RF Product Engineer with a passion for innovation and a desire to contribute to a dynamic team, we encourage you to apply for this exciting opportunity.,

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: WLAN RF Front-end design, validation and debug. Skills/: - 4-6 years of experience in RF Front-end design, tuning and debug preferably in WiFi domain.- Strong RF board design and debug experience.- Experience in using EDA tools like ADS, HFSS , AWR for RF design and Layout simulation.- Must be hands on bench level debug and testing.- Experience with lab equipment’s including Spectrum analyzer, Network analyzer, Signal generator, etc- Experience in using the circuit design tools(Cadence/Mentor) and Layout tools.- Experience with EMI/EMC testing - System level architecture design is desirable. - Candidates must possess good oral and written communication skills. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. 4-6 years of experience Bachelors/Masters in Engineering

Design and develop RF and analog circuits such as LNAs, mixers, power amplifiers, VCOs, PLLs, and ADC/DACs. Perform system-level analysis to optimize RF performance parameters like gain, noise figure, linearity, and phase noise. Conduct circuit simulations using tools like Cadence Spectre, ADS, HFSS, Momentum, and EMX. Collaborate with layout engineers to ensure optimal floorplanning, parasitic extraction, and RF routing. Conduct post-layout verification and EM simulations for high-frequency designs. Participate in lab validation and characterization of fabricated ICs, debugging issues, and improving performance. Work closely with system architects and digital design teams for mixed-signal integration. Support product engineering and test development for production ramp-up. Qualifications: 2 to 5 years of experience in RF/analog IC design. Strong understanding of RF circuit design principles, including impedance matching, S-parameters, and nonlinearity analysis. Hands-on experience with Cadence Virtuoso, Spectre RF, ADS, HFSS, or similar EDA tools. Knowledge of CMOS/BiCMOS process technologies and parasitic-aware design methodologies. Experience in EM simulation and modeling of on-chip passives (inductors, transmission lines, baluns). Familiarity with RF lab equipment (network analyzers, spectrum analyzers, signal generators). Strong problem-solving skills and ability to work in a fast-paced startup environment. Excellent communication and teamwork skills.

Job Area: Engineering Group, Engineering Group > Systems Engineering General Summary: We are seeking a highly motivated Test Engineer to join our XR research team. The role involves validating multimedia content transmission (audio/video) over wireless/wired networks, ensuring performance, stability, and interoperability across devices and platforms. Key Responsibilities: Design and execute test plans for streaming over wireless/wired network. Validate synchronization, latency, jitter, and throughput under various network conditions. Use tools such as sniffers, protocol analyzers, and automation frameworks to capture and analyze traffic. Collaborate with development teams to debug and resolve issues. Conduct interoperability testing with third-party devices. Maintain test beds and simulate real-world usage scenarios. Document test results, file bugs, and track issues to closure. Required Skills: Good understanding of Wi-Fi protocols and multimedia streaming standards. Experience with network analyzer tools like Wireshark, iPerf, etc. Familiarity with audio/video codecs, streaming formats, and synchronization techniques. Hands-on experience with Windows/Android/Linux-based test environments. Excellent scripting skills (Python preferred) for test automation and log analysis. Strong communication skills, ability to collaborate with cross-functional teams. Preferred Qualifications: Knowledge of Bluetooth/Wi-Fi coexistence testing is a plus. Knowledge of XR technologies is a plus. Experience in leading a technical team. Minimum Qualifications: Bachelors degree in engineering, Computer Science, or a related field with 10+ years of related work experience. OR Masters degree in engineering, Computer Science, or a related field with 8+ years of related work experience. Keywords: Python, Wi-Fi, Multimedia, Test Automation Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 4+ years of Systems Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 3+ years of Systems Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field and 2+ years of Systems Engineering or related work experience.

1. Candidate shall have experience in handling multiple end to end product project around RF design, analysis, testing, calibration, regulatory compliances and release of products for commercial deployments 2. Relevant experience of 3+ years in RF Design. Responsibilities 1. Lead the design, simulation, and verification of complex analog and mixed-signal circuits, Signal integrity, power integrity, impedance Analysis. 2. Perform advanced simulations and analyses to ensure exceptional circuit performance and compliance with specifications. 3. Create comprehensive documentation of design methodologies, specifications, and outcomes. 4. Multi radio front end and radio optimisation. 5. Extensive knowledge on RF matching, filter design and antenna matching. 6. Conversant with lab equipment like Spectrum Analyzer, Network analyser, RF Signal generators , IQXEL, MT8852 etc. 7. Experience on EMI/EMC, Antenna design, Signal Integrity and Thermal Analysis will be a key skill. 8. Design and develop Regulatory certified BLE, ZigBee, Wi-Fi modules. 9. Work closely with cross functional teams to derive the design specification for Modules. 10. Prototype Board bring-up, Validation and Characterization. 11. Handover design to manufacturing and help to derive the production test plan. 12. Documentation of design, test plan and test results. 13. Supporting Customer support team in debugging critical customer issues. 14. Radio side design and debugging. 15. RF performance evaluation, calibration and optimisation. 16. Link budget and harmonics analysis. 17. Tuning and optimisation of RF front end. 18. Deep understanding on radio chip, physical layer customisations and its impacts on the radio performance. 19. Understanding of various physical layer standards. 20. Willingness to contribute in global standards committee of next generation wireless systems. 21. Ownership of product level EMI/EMC compliances for global requirements as well. 22. Schematic, Layout and BOM selection. Mandatory Key Skills MT8852,Signal integrity,power integrity,debugging,Spectrum Analyzer*,Network analyzer*,RF Signal generators*,IQXEL*,RF design*

We are hiring for US based MNC and job location is Bangalore on the contract of 2 years (Payroll - Mynd Solutions) Job Title - Technical Support Application Engineer The role is part of the KeysightCare Customer Support Organization, delivering post-sales customer support directly to key customers and strategic partners. The KeysightCare Technical Support Application Engineer is a key player in the customer value-chain and you are critical in supporting our customers technical problems. We are looking for an experienced RF&W Component Test application/product specialist engineer who can demonstrate a broad knowledge of instrumentation, applications and technologies. You will develop to get the go to knowledge expert within KeysightCare and will engage with customer and partners across EMEAI to deliver post-sales customer support. You will be a key contributor to the KeysightCare EMEAI regional strategy and will work across KeysightCare to lead projects requiring coordination with other functions, customers, third parties. The successful candidate must demonstrate a real passion for customer success and enjoy taking on complex technical challenges working in a customer facing deep technical environment. Responsibilities include: - Engage with customers, sales and/or service representatives across EMEAI to deliver post-sales customer support, solving technical questions of varied scope and complexity. - Manage day to day operations and workload expectations autonomously. - Share technical expertise across the EMEAI team and write deep technical articles for the customer knowledgebase - Close cooperation with the Keysight product and software and solution centres. The technical support application engineer is the technical interface between the customers and the Keysight Worldwide support team. - Take proactive actions while interacting with customers in terms of solving current questions or addressing potential future needs. - Deliver Getting Started and “Start Up Assistance” to customers remote and onsite. - Develop into the Component Test knowledge expert within KeysightCare for products and solutions Job Qualifications: - Bachelor and/or Master’s degree in Electronic and Communication Engineering. - Typically, 3-7 years relevant experience working in Vector Network Analysis, Impedance Analysis and DC Device Parameter Analysis. - Is familiar with calibration techniques, like SOLT, TRL, De-embedding in coax, waveguide and on-wafer. - Brings experience of testing passive and active components from filters to high power amplifier or mixers with VNAs. - Solid understanding of modern VNA measurements beyond S-Parameters like, gain compression, IMD, Noise Figure. - Requires in-depth technical knowledge and experience in job and ability to work independently. Solid understanding of RF/W fundamentals with practical experience using RF/W test equipment. - Solid understanding of the generation, demodulation and analysis of digital communication signals. - Advanced instrument programming skills with SCPI and instrument drivers with C++, C#, VEE, LabView, Python, MATLAB ® or VB, is an advantage. - Strong organisational skills, ability to multi-task, prioritise and work well under pressure. - A strong level of English written and Oral is essential for this role. - Extra languages are an advantage. - Understands the local market, customer needs and dynamics, strong communicator who can positively interact with customers. Interested candidates can directly share CV at pratibha@myndsol.com mentioning the job title in the subject line. This role can be converted to permanent role based on performance and client's requirement.

Job Overview: The RF Service Engineer is responsible for maintaining, repairing, and servicing RF jamming equipment. This includes troubleshooting issues, conducting tests, ensuring proper functionality, and providing post-sales support to clients. The role involves regular interaction with customers, offering technical solutions, preventative maintenance, and ensuring optimal equipment performance. Key Responsibilities: RF Component Testing: Use advanced testing instruments such as Network analysers, Signal Generators, Spectrum Analysers, and Noise Figure Meters to test individual RF components and full systems. System Testing & Optimization: Conduct comprehensive testing and tuning of RF modules to ensure they meet performance standards and customer requirements. Environmental & EMI/EMC Compliance Testing: Perform EMI/EMC tests to assess the environmental compatibility of RF equipment and ensure compliance with relevant regulations and customer specifications. Documentation & Reporting: Maintain detailed documentation of all test results, repairs, maintenance, and customer interactions. Update and create user manuals, maintenance, schedules, and technical reports. Preventative Maintenance: Develop and implement proactive maintenance strategies to reduce downtime and enhance the lifespan of RF equipment. Customer Support & Troubleshooting: Serve as a point of contact for customers, providing expert troubleshooting and solutions to technical issues. Ensure timely resolution of service requests and provide clear instructions to customers. Installation & Setup Assistance: Assist in the installation and configuration of RF equipment at client locations, ensuring proper setup and optimal performance. Quality Assurance & Safety Compliance: Perform regular quality assurance checks and ensure all installations and service procedures meet safety standards and operational excellence. Inventory Management & Procurement: Monitor inventory levels of essential parts and equipment, and coordinate reordering to ensure service continuity. Key Attributes: • A valid driving license and ownership of a two-wheeler are mandatory for attending within-city calls. • Customer-focused with a passion for delivering effective solutions and high levels of service. • Strong technical knowledge in RF systems, especially jamming technologies and related electronic components. • Skilled in managing client relationships, troubleshooting issues, and providing actionable insights for product optimization. • Proactive, organized, and able to handle multiple service requests while ensuring a high level of service quality.