21 Nema Jobs

Job description Burns McDonnell India (BMI) Power Division is looking for a well-rounded and driven Electrical Engineer in the Mumbai Office. The Power Division focuses on power generating facilities which offer a wide range of design and project execution experiences. Designs include the electrical interconnect to the bulk power grid and all associated power generating facility auxiliary power equipment. Equipment includes rotating machines, such as generators and motors, large power transformers, generator circuit breakers, isolated phase bus duct, non-segregated phase bus duct, switchgear, motor control centers, small power transformers, and variable frequency drives. The wide range of projects provide opportunities on both multi-discipline and electrical only projects. Multi-disciplined power generation projects require engineers to work in a diverse project team environment and exhibit the ability to develop consensus in identifying the optimum solution to complex problems. These complex assignments require the application of advanced techniques, resulting in the development of new or improved processes, equipment and/or technological methods. Position will require extensive interface with equipment suppliers/vendors, and with Burns McDonnell project managers, other engineering disciplines, modelers, designers, and detailers locally in the Mumbai office as well as remotely in various offices in the United States. For an Electrical Engineer, following are some specific duties responsibilities: Coordinating project design assignments and design teams; Assist/develop Electrical system modeling including grounding, load flow, short-circuit, and arc-flash analysis; Assist/develop protective relay settings, calculations, and coordination studies; Assist/develop scope of work documents, conceptual design, and execution plans; Assist/develop equipment specifications, procurement packages, reviewing vendor drawings and factory acceptance testing electrical equipment; Assist/develop electrical deliverables like one-line diagrams, three-line diagrams, schematics, interconnection drawings, equipment layouts, cable schedules, panel schedules, power, grounding and lighting layouts for constructing/installation of new or modifications of existing power generating facility electrical systems; Regularly meeting and corresponding with clients or outside personnel.; Travel to the United States as required and requested to support assignments on projects and overall office needs Work experience which demonstrates quick learning and ability to adapt to new processes and workflows. Has experience working in teams and collaborating with Engineers and Designers for developing detailed Electrical Engineering design deliverables. This position requires an individual capable of applying Engineering and analytical skills to broad areas of assignments. Must be capable of interpreting and developing solutions to assigned problems. Qualifications Preferred skills and qualifications are: Bachelor s degree in electrical engineering from accredited program. Minimum 1-4 years of related experience. Experience in power generating facilities, process facilities, and/or large industrial facilities including the following design types, is strongly preferred: medium voltage, low voltage, lighting, grounding, electrical equipment control, protective relaying and associated systems design and construction administration. Software experience utilizing SKM Power Tools, ETAP, SmartPlant, SmartPlant Electrical, CDEGS or similar software is preferred. Excellent written verbal communications as well as strong analytical problem solving skills are required. Previous consulting engineering experience preferred.

Job description Burns McDonnell India (BMI) Power Division is looking for a well-rounded and driven Electrical Engineer in the Mumbai Office. The Power Division focuses on power generating facilities which offer a wide range of design and project execution experiences. Designs include the electrical interconnect to the bulk power grid and all associated power generating facility auxiliary power equipment. Equipment includes rotating machines, such as generators and motors, large power transformers, generator circuit breakers, isolated phase bus duct, non-segregated phase bus duct, switchgear, motor control centers, small power transformers, and variable frequency drives. The wide range of projects provide opportunities on both multi-discipline and electrical only projects. Multi-disciplined power generation projects require engineers to work in a diverse project team environment and exhibit the ability to develop consensus in identifying the optimum solution to complex problems. These complex assignments require the application of advanced techniques, resulting in the development of new or improved processes, equipment and/or technological methods. Position will require extensive interface with equipment suppliers/vendors, and with Burns McDonnell project managers, other engineering disciplines, modelers, designers, and detailers locally in the Mumbai office as well as remotely in various offices in the United States. For a Mid Level Electrical Engineer, following are some specific duties responsibilities: Coordinating project design assignments and design teams; Electrical system modeling including grounding, load flow, short-circuit, and arc-flash analysis; Protective relay setting development, calculation, and coordination studies; Developing scope of work, conceptual design, and execution plans; Developing equipment specifications, procuring, reviewing vendor drawings and factory acceptance testing electrical equipment; Preparing engineering cost and man-hour estimates and schedules; Preparing/creating electrical deliverables like one-line diagrams, three-line diagrams, schematics, interconnection drawings, equipment layouts, cable schedules, panel schedules, power, grounding and lighting layouts for constructing/installation of new or modifications of existing power generating facility electrical systems; Provide leadership, guidance, instruction, and mentorship to less experienced staff members; Regularly meeting and corresponding with clients or outside personnel.; Travel to the United States as required and requested to support assignments on projects and overall office needs Work experience which demonstrates progressive design and project management responsibilities. Has experience with design scope development, budget preparation and project execution meeting schedule requirements and maintaining established budgets. This position requires an individual capable of applying intensive and diversified knowledge of principles and practices to broad areas of assignments. Must be capable of interpreting and developing solutions to complex problems. Qualifications Bachelor s degree in electrical engineering from accredited program. Minimum 7-10 years of related experience. Experience leading team for execution of EPC projects for power plant type projects. Experience of executing projects based on ANSI/NEMA, NFPA, NERC, IEEE, CSA and other international codes and standards; Experience in power generating facilities, process facilities, and/or large industrial facilities including the following design types, is strongly preferred: medium voltage, low voltage, lighting, grounding, electrical equipment control, protective relaying and associated systems design and construction administration. Software experience utilizing SKM Power Tools, ETAP, SmartPlant, CDEGS or similar software is preferred. Field construction and commissioning experience is preferred. Excellent written verbal communications as well as strong analytical problem solving skills are required. Previous consulting engineering experience preferred.

Title: Rotating Equipment Specialist JOB TITLE: Rotating Equipment Specialist REPORTS TO: HOD - Machinery JOB LOCATION: Gurgaon, India POSITION SUMMARY: Functions as a technical specialist who would be responsible for the technical quality of the Data Sheets, Specifications, and Technical Requisitions for Rotating Equipment and Packaged Equipment. POSITION DESCRIPTION: Selection & application, preparation of Data Sheets, Specifications and Technical Requisitions, technical evaluation and Supplier document reviews, participation in inspection & testing, Post Erection Inspections, Commissioning and Field Troubleshooting as required for proprietary Rotating and Packaged Equipment for various KBR technologies. Prepare estimates for new KBR proposals. Assist with estimating staffing and schedules technical communications with clients. Under broad direction, functions as a technical specialist who makes decisions and recommendations that are recognized as authoritative and have a far reaching impact on extensive engineering and related activities of the company. Negotiates critical and controversial issues with top-level engineers and officers of other organizations and companies. Shall have active role in training of new personnel to the industry and KBR. Candidate shall be managing direct reports, establishing individual performance goals and objectives and reviewing performance against objectives. Maintains a safe working environment, ensuring compliance with all governmental regulations and corporate safety guidelines. Ensures that all personnel assigned to the operations receive appropriate safety training and adhere to all safety standards. MINIMUM REQUIREMENTS: Should be a first-class graduate in Mechanical Engineering with relevant professional experience of 10 - 12 years in selection & application, detailed engineering of Pumps, compressors, steam and gas turbines, packaged equipment n hydrocarbon down-stream industry - with technology/EPC companies, refining, and/or coal gasification, chemical industries. Experience in chemical, refining, and/or synthesis gas industries. Familiarity with industry standards for rotating equipment: API, ISO, NEMA, ASME, IEEE, IEC, ALPEMA, PIP etc Should have experience of preparing Technical Requisitions, technical evaluation and Supplier document reviews, participation in inspection, testing & commissioning as required for Rotating Equipment and Packaged Equipment, Preparation of estimates for new proposals, estimation of staffing & schedules etc. Experience in an operating company with packaged and rotating equipment used in KBR technologies: compressors, pumps, steam and gas turbines, packaged equipment, etc will be considered as an advantage. Must have strong communications skills - both verbal and written, which will be used within KBR and with external suppliers and clients. Candidate should be willing to travel domestically or internationally. KEY RELATIONSHIPS: Manages key business relationships with clients and with Technology Business Unit Managerial teams in India and Houston.

As a Mechanical or Electrical Engineer with 6-9 years of experience in Product Design & Cost Out, you will be involved in various responsibilities related to VAVE (Cost Out) projects for Low Voltage Switchgear products such as switch disconnectors, contactors, MPCBs, push buttons, relays, and accessories. Working closely with global stakeholders, you will be responsible for idea generation, design, testing, and implementation phases to ensure product compliance with global design standards like IEC, UL, CSA, NEMA, or other relevant standards. Your role will also involve system and component sizing, designing, simulation, and testing activities to meet the requirements of Low Voltage Switchgear. You will be expected to modify existing products to align with customer, manufacturing, regulatory, industry standards, and market requirements using the Change Management process. Additionally, you will perform tear-down activities, generate cost-out ideas, and demonstrate your expertise in working on NPI/Sustaining/VAVE projects for various components and accessories. Utilizing your engineering skills, you will select appropriate techniques to solve problems, make design recommendations, and suggest alternative materials based on your knowledge of metals and plastics. Your understanding of low voltage switchgear standards and experience in executing tests for EN60947/UL60947 will be essential in developing test plans, assessing results, performing root cause analysis, and taking corrective/preventive actions. Furthermore, you will be responsible for conducting design engineering analysis on various components like current paths, mechanisms, springs, bimetals, housings, actuator circuits, arc chambers, coils, etc. Your role will also involve reviewing supplier documents, reliability predictions, FMEA, and various engineering tasks related to products, materials, manufacturing processes, tests, and customer applications. To support the project execution, you will need to assess production feasibility, ensure part production approval processes, and complete designs using tools like UG-NX or SolidWorks. Knowledge of PLM systems like Enovia and SAP will be beneficial, along with the ability to prepare materials for design reviews. In addition to your technical skills, you are expected to be a team player with good communication skills, capable of working effectively in a global and virtual environment. Experience in working on NPI/Sustaining/VAVE projects for various components and accessories will be advantageous for this role.,

About Us: BW Design Group is a fully integrated architecture, engineering, construction, system integration, and consulting firm committed to helping clients realize their critical goals from Strategy to Commercialization. The firm, born from a manufacturing technology company, combines deep domain expertise in the manufacturing environment with an approach built to serve clients" dynamic needs. Rooted in a distinct culture of Truly Human Leadership, BW Design Group cultivates leaders who will shape the future and partners with clients in various industries to drive the future of manufacturing and technology. Barry-Wehmiller is a global supplier of engineering consulting and manufacturing technology for industries such as packaging, corrugating, sheeting, and paper-converting. With a focus on people-centric leadership and purpose-driven growth, Barry-Wehmiller has evolved into a $3 billion organization with nearly 12,000 team members united by a common belief in using business to create a better world. Job Summary: As an Electrical Design Engineer at BW Design Group, you will collaborate with engineering teams to design technical solutions meeting clients" business needs. Working alongside licensed engineers and experienced designers, you will focus on designing power distribution and lighting systems for industrial and commercial facilities. Responsibilities: - Coordinate power utility tasks - Design 277/480V building services - Perform power distribution calculations including switchboards, panel boards, transformers, wire sizing, voltage drop, conduit fill, and cable tray sizing - Select Motors, Drives, PLC, and IO modules - Prepare design criteria, one-line diagrams, and specifications for electrical equipment - Size and select UPS for SCADA system and three-phase inverters - Design industrial control panels (PLC, RIO, VFD) - Create wiring and conduit drawings using AutoCAD - Assist in resolving Change Request Notices and Request for Information related to electrical engineering - Develop grounding and bonding plans for new equipment - Generate electrical drawings using AutoCAD Education: Bachelor's degree in Electrical and Electronics Engineering Requirements: - Minimum 6 to 8 years of Electrical panel design experience - Preferred experience in Food, Beverage, or Pharmaceutical Facilities or Industry Engineering - Proficiency in preparing single line diagrams, panel IGA & OGA drawings, and Schematics based on technical specifications - Ability to perform calculations, select Motors, Drives, AC, conduct load calculations, and make cable selections based on application & design standards - Design, implement, maintain, and improve electrical instruments, equipment, facilities, components, products, and systems - Prepare technical drawings, electrical system specifications, and customer requirements - Write progress reports and present findings to project managers and clients - Familiarity with standards such as UL508A, IEC, NEMA - Tools Knowledge: AutoCAD Electrical, Eplan P8 - Skilled in producing electrical designs in multi-discipline projects - Proficiency in AutoCAD software - Excellent communication, interpersonal skills, and ability to interact with stakeholders at all levels - General computer skills including Microsoft Excel, Word, and Outlook Barry-Wehmiller values the diverse experiences and talents individuals bring beyond technical qualifications. Candidates from all backgrounds are encouraged to apply, and accommodations during the interview process can be requested.,

Greetings from Synergy Resource Solutions, a leading HR Management Consultancy. Our client is a global leader in water technology and services for industrial and infrastructure markets, focusing on solving water scarcity through desalination, water reuse, and zero liquid discharge (ZLD). With a track record of executing over 2,000 projects across 60 countries, they leverage 40 years of experience in handling challenging waters to help renowned companies reduce their water and carbon footprint, thereby mitigating water risk. Position: Manager - Electrical Total Experience: 15-20 years of relevant experience Education: B.E. Electrical / Any masters in Electrical Location: Ahmedabad Your duties will involve studying and comprehending assigned work, including project PIDs, design plans, and customer specifications. You will collaborate with designers and drafters to facilitate the design of Electrical and control system drawings, ensuring accuracy and meeting project requirements. Responsibilities include: - Developing IO lists and control system architecture designs - Overseeing the design of instrument JBs, PLC control panels, and wiring diagrams - Creating Single Line diagrams, control schematics, and facilitating designs for various equipment - Conducting Power System studies, designing power systems, and collaborating with the Mechanical engineering department - Reviewing drawings and designs for accuracy, performing engineering release, and facilitating material procurement - Undertaking vendor quote reviews, drawing revisions, and maintaining records per ISO-9000 - Leading performance reviews of designers/drafters and handling a team Skill Requirements: - Proficiency in Electrical & Control systems design - Knowledge of international standards like ISA, NEC, NEMA, UL, NFPA, IEC, CE, API - Proficiency in AutoCad Electrical, MS Word & Excel - Experience in process instrumentation, PLC/HMI, DCS, and control systems design - Effective communication skills, positive attitude, and organizational capabilities - Ability to work across locations, manage multiple projects, and apply common sense understanding - Participation in interdepartmental meetings, technical support during fabrication, and adherence to ISO requirements - Willingness to work extra hours as needed and undertake specialized assignments If you possess the required skills and experience and are looking for a challenging opportunity in the electrical field, we encourage you to apply for the Manager - Electrical position based in Ahmedabad.,

Greetings from Synergy Resource Solutions, a leading HR Management Consultancy. Our client, a global leader in water technology and services for industrial and infrastructure markets, is seeking a Manager - Electrical to join their team in Ahmedabad. With a focus on addressing water scarcity through desalination, water reuse, and zero liquid discharge (ZLD), our client has successfully completed over 2,000 projects in 60 countries. Leveraging over 40 years of experience in handling challenging water treatment projects, they work with some of the world's most renowned companies to reduce water and carbon footprint, thereby mitigating water risk. As the Manager - Electrical, you will be responsible for the design of Electrical and control system drawings for the assigned projects. Your main duties will include developing detailed IO lists, control system architecture designs, overseeing the design of Skid/Field instrument JBs, PLC control panels, and single-line diagrams. Additionally, you will be involved in Power System studies, cable design, lighting layout design, and reviewing all drawings for accuracy. To excel in this role, you should possess a Bachelor's degree in Electrical Engineering or a related field, with 15-20 years of relevant experience. You must have a strong understanding of Electrical and control systems design, as well as working knowledge of international standards such as ISA, NEC, NEMA, UL, NFPA, IEC, and CE. Proficiency in AutoCAD Electrical, MS Word, and Excel is required, or the ability to become proficient in MS Office. Experience in design and engineering of PLC/HMI, DCS, and control systems, particularly in power, petroleum, or process industries, is highly desirable. Excellent communication skills, both written and verbal, are essential for this role, as you will be required to interact with customers, suppliers, and internal teams. A positive attitude, good organizational skills, and the ability to work effectively in a team are also key attributes for success in this position. You should be willing to work extra hours when necessary, manage multiple projects simultaneously, and follow ISO requirements and company procedures diligently. If you are a proactive and detail-oriented professional with a passion for Electrical and control systems design, this opportunity with our client offers a challenging yet rewarding environment where you can contribute to cutting-edge water technology solutions. Join our client's team and be part of their mission to solve water scarcity and reduce environmental impact globally.,

As an Electrical Design Engineer, you will collaborate with engineering teams of Architects and ME/EE-Engineers to devise technical solutions meeting clients" business needs. Your responsibilities will include designing power distribution and lighting systems for various industrial and commercial facilities. With a minimum of 6 to 8 years of Electrical panel design experience, you are expected to have expertise in preparing single line diagrams, panel IGA & OGA drawings, and schematics based on technical specifications and customer requirements. Your role will involve performing calculations and selections for Motors, Drives, AC, load calculations, and cable selections as per application and design standards. You will engage in designing, implementing, and enhancing electrical instruments, equipment, facilities, components, and systems for commercial and industrial purposes. Furthermore, you will be responsible for preparing technical drawings, electrical system specifications, and customer requirements. Knowledge of standards such as UL508A, IEC, NEMA, as well as proficiency in tools like AutoCAD Electrical and Eplan P8 is essential. Your ability to produce electrical designs within a multi-discipline project environment and communicate effectively with project managers, clients, and vendors is crucial. Having a Master's or Bachelor's degree in Electrical and Electronics Engineering, you will handle tasks like power utility coordination, power distribution calculations, and the selection of various electrical components. Designing industrial control panels, resolving change requests and RFIs, and developing electrical drawings using AutoCAD are also part of your responsibilities. Overall, your role as an Electrical Design Engineer requires strong technical expertise, attention to detail, and effective communication skills to deliver high-quality solutions for clients in diverse industries.,

Job Summary: Rishabh Engineering is looking for experienced Piping Stress Engineers to perform comprehensive stress analysis and provide technical support across piping systems in large-scale industrial projects. The candidate will be responsible for ensuring the mechanical integrity and code compliance of piping systems, supporting the engineering team through all phases of design and execution. Key Responsibilities: Perform piping stress analysis using CAESAR II and other relevant tools in accordance with applicable codes (ASME B31.1, B31.3, API, etc.). Review and interpret piping and instrumentation diagrams (P&IDs), isometrics, general arrangement drawings, and equipment data sheets. Identify critical lines and perform flexibility analysis, considering thermal expansion, seismic, wind, and dynamic loads. Provide support in selecting and designing piping supports, expansion loops, and spring hangers. Evaluate nozzle loads on rotating and static equipment and coordinate with Mechanical and Civil teams for resolution. Prepare stress analysis reports and recommend modifications where necessary. Review vendor documents and interface with suppliers on stress-related matters. Participate in model reviews and coordinate with 3D designers to ensure stress-related design criteria are implemented. Ensure compliance with project specifications, industry standards, and best engineering practices. Provide technical mentoring to junior engineers and collaborate with global teams. Key Skills & Competencies: Proficiency in CAESAR II (mandatory), with knowledge of other tools like AutoPIPE or Rohr2 considered an asset. Deep understanding of international design codes (ASME B31.3, B31.1, API 610/617, WRC 107/297, etc.). Experience with stress analysis of critical lines , nozzle load calculations, spring supports, and interaction with civil/structural. Ability to perform lift-off, slug flow, two-phase flow, PSV and relief line analysis . Strong analytical and problem-solving skills. Ability to interpret client specifications and incorporate stress requirements into design deliverables. Familiarity with 3D modeling software like CADWorx, SmartPlant 3D (SP3D) , or E3D for integration with piping layouts. Qualifications: B.E./B.Tech in Mechanical Engineering or a related discipline. 15 to 20 years of relevant piping stress engineering experience in EPC/EPCM projects. Prior experience working in oil & gas, petrochemical, refinery, or power projects is preferred. Good communication and coordination skills to work in multi-disciplinary teams. Preferred Experience: Global project exposure, working with North American or Middle East client specifications. Familiarity with Indian and international regulatory requirements and standards. Experience in modularization or brownfield revamp projects is a plus.

As an electrical design engineer, you will collaborate with engineering teams, architects, and ME/EE-Engineers in an office setting to develop technical solutions that align with clients" business requirements. Your role will involve designing power distribution and lighting systems for various industrial and commercial facilities, working closely with licensed engineers and experienced designers. Your responsibilities will include power utility coordination, 277/480V building services, power distribution calculations (such as switchboards, panel boards, transformers, wire sizing, voltage drop, conduit fill, cable tray sizing, and cooling calculations), selection of motors, drives, PLC, and IO modules, as well as preparation of design criteria, one-line diagrams, and specifications for electrical equipment. Additionally, you will be involved in selecting and sizing UPS for SCADA systems, three-phase inverters on site, industrial control panel design, wiring and conduit drawings using AutoCAD, resolving EE-oriented Change Request Notices and Request for Information, preparing grounding and bonding plans for new equipment, and developing electrical drawings. To qualify for this role, you should have a Bachelor's degree in Electrical and Electronics Engineering and a minimum of 6 to 8 years of experience in electrical panel design. Experience in Food, Beverage, or Pharmaceutical Facilities or Industry Engineering is preferred. Proficiency in tools such as AutoCAD Electrical and Eplan P8 is necessary. You must be adept at preparing single-line diagrams, panel IGA & OGA drawings, and schematics based on technical specifications and customer requirements. Additionally, you should be capable of performing calculations and selections related to motors, drives, AC, load calculations, and cable selections based on application and design standards. Strong communication and interpersonal skills are essential for this role, as you will be required to interact with project managers, clients, vendors, and various levels of management. The ability to write progress reports and present findings effectively is crucial. Knowledge of standards like UL508A, IEC, NEMA, and proficiency in AutoCAD software are prerequisites. Your role will involve designing electrical systems for commercial and industrial purposes, implementing improvements, and ensuring the maintenance of electrical instruments, equipment, facilities, components, products, and systems.,

As an Electrical Engineer Lead, you will collaborate with engineering teams of Architects and ME/EE-Engineers, both in-office and remotely, to devise technical solutions that align with the business needs of our clients. Your role will involve working alongside licensed engineers and experienced designers to create power distribution and lighting systems tailored for various industrial and commercial facilities, including manufacturing and distribution centers. Your educational background should include a Bachelor's or Master's degree in Electrical and Electronics Engineering. Your responsibilities will encompass a wide range of tasks, such as power utility coordination, designing power distribution systems, specifying Motor Control Centers, and conducting lighting design using Visual Lighting. You will be involved in preparing design criteria, one-line diagrams, and equipment specifications, as well as selecting and sizing UPS systems and inverters. To excel in this role, you should have a minimum of 12-18 years of Electrical design experience, with a preference for candidates with experience in Food, Beverage, Pharmaceutical, or Semiconductor Facilities Engineering. Proficiency in tools such as AutoCAD Electrical, SKM, Easypower, Visual Lighting, and REVIT is essential. You will be expected to demonstrate hands-on experience in single line diagram preparation, motor and drive selection, and electrical studies for various applications. Your responsibilities will also include developing and maintaining electrical instruments, equipment, and systems, ensuring compliance with specifications, codes, and customer requirements. Strong communication and interpersonal skills are crucial for interacting with project managers, clients, and vendors. Additionally, proficiency in Microsoft Excel, Word, and Outlook is necessary for this role. Overall, as an Electrical Engineer Lead, you will play a key role in designing and implementing electrical solutions that meet the specific needs of our clients, while adhering to industry standards and best practices.,

Hands on experience in using SolidWorks CAD tool is required for this role. You should have expertise in various manufacturing methodologies, especially in sheet metal and/or plastics injection molding. It is essential to have experience in designing mechanical and electro-mechanical assemblies, particularly working on complex assemblies in SolidWorks. You should possess excellent drafting and detailing skills, as well as be proficient in GD&T and Tolerance stack up analysis. Experience in manual design calculation and exposure to FEA analysis are important aspects of this role. Supplier interaction and cross-functional coordination for project execution and closure are also key responsibilities. You should have experience in design verification and documentation, as well as in Engineering Change Management. Knowledge of the medical device development lifecycle and standards is required. Experience in Product Teardown analysis, Function analysis, and leading technical evaluations with experts to make decisions are essential. It would be beneficial to have knowledge of VAVE methodologies and tools, as well as global design standards like IEC, UL, CSA, NEMA, or any other compliance standard. You should have experience in design verification, developing and executing protocols, and related documentation. Additionally, performing Failure Analyses and Investigation reports, working out proposals, and cost estimates of project-related costs are part of the responsibilities. Being self-motivated and proactive is important for this role, as well as taking complete ownership of the assigned projects.,

As an Electrical Design Engineer, you will collaborate with a team of Architects and ME/EE-Engineers to develop technical solutions that align with the clients" business requirements. Your responsibilities will involve designing power distribution and lighting systems for various industrial and commercial facilities, under the guidance of licensed engineers and experienced designers. You should hold a Bachelor of Engineering degree in Electrical and Electronics and have a minimum of 4 to 8 years of experience in Electrical panel design. Prior experience in Food, Beverage, or Pharmaceutical Facilities or Industry Engineering is preferred. Your role will include preparing single line diagrams, panel IGA & OGA drawings, and schematics based on technical specifications and customer requirements. Additionally, you will be responsible for conducting calculations, selecting motors, drives, AC components, and cables based on application needs and design standards. Furthermore, you will be involved in designing, implementing, and enhancing electrical instruments, equipment, and systems for commercial and industrial purposes. You will also be required to create technical drawings, review specifications of electrical systems, and communicate progress reports to project managers and clients. Familiarity with standards such as UL508A, IEC, and NEMA is essential, along with the ability to produce electrical designs for multi-discipline projects. Proficiency in AutoCAD software is a must-have skill for this role, and knowledge of AutoCAD Electrical, Revit, and EPlan P8 will be an added advantage. Strong communication and interpersonal skills are crucial for effective interaction with management, clients, and vendors. Moreover, you should possess good computer skills, including the use of Microsoft Excel, Word, and Outlook. Your responsibilities will include coordinating power utilities, designing 277/480V building services, performing power distribution calculations, selecting motors and drives, and creating design criteria and specifications for electrical equipment. You will also be involved in designing industrial control panels, resolving Change Request Notices and Request for Information, and developing grounding and bonding plans for new equipment. In summary, as an Electrical Design Engineer, you will play a vital role in designing electrical systems, collaborating with a diverse team, and ensuring the successful implementation of projects in the industrial and commercial sectors.,

Title : E & I Engineer Qualification : BE E&C or BE I &C Experience : 10-12 years of professional experience in the engineering of process plants for the Oil & Gas, mining and Power industries as an E&I engineer Location : Vadodara

This role is for one of Weekday's clients Min Experience: 15 years Location: Ahmedabad JobType: full-time Education: B.E. Electrical / Any masters in Electrical About the role Greetings from Synergy Resource Solutions, a leading HR Management Consultancy. Our client is a global leader in water technology and services for industrial and infrastructure markets. With a focus on solving water scarcity through desalination, water reuse, and zero liquid discharge (ZLD), they have executed over 2,000 projects across 60 countries. Leveraging the experience and knowhow gained over 40 years handling some of the most difficult to treat waters, they help some of the world's most recognized companies reduce their water and carbon footprint, ultimately reducing water risk. Your duties and job responsibilities will include but not be limited to the following : Study & understand the allocated work. including the following input documents Project PID's Design plan for E & C Department & refer customer spec independently and as necessary, & solicit clarification as deemed necessary Obtain & review input documents from the upstream disciplines, such as datasheets and /or drawings for instruments, packaged equipment, Project submittal schedule Job Description: To facilitate the design of Electrical and control system drawings for project assigned in collaboration with the designer/ drafter of the department resources & ensure that the designs meet the expectations of requirement and outputs are error free. The dwg s include but not limited to Develop a detailed IO list, control system architecture design. Oversee the design of Skid / Field instrument JBs, PLC control panels complete with schematics, module wiring, terminal wiring , panel layout, instrument connection diagrams, and Bill of Materials list for al designs Develop Single Line diagrams ( MV & LV), control schematic for Motor control centers & other equipment Solicit quotes for MCC & other equipment as applicable. Select & prepare datasheets & facilitate designs for Variable frequency drives- both free standing and panel mounted types Select & prepare datasheets & Develop heat tracing designscalculations& facilitate these designs for installation on skids/ interconnecting piping For projects involving power systems, undertake Power System studies - Load flow, short circuit, grounding studies, Design of power systems,SWGR, Transformers, MV VFD, LV VFD, MV Switchgear, LV MCC, VFDs, Cable trays, cable design, lighting, lightning protection, UPS, grounding design , UPS & Battery systems, DG Sets, Work along with Mechanical engineering department for Cable Tray Routing, Grounding/ Earthing design, including Layout drawings Lighting layout design & Lighting calculation & Review all drawings and designs, including BOM for accuracy & validation of parts Use check lists to verify the drawings, perform engineering release of documents Upload materials (to the SAP system) to be procured to facilitate manufacturing Undertake vendor quotes review & make a purchase recommendation Use sub vendor dwgs for proper integration with the balance of plant design. Review & reconcile the design that has been developed. Undertake drawing revisions. This may involve cross discipline necessitated changes, or customer comments Maintain all records per ISO-9000 Facilitate performance reviews of designers/ drafters working on projects Team handling Skill Requirements: Skilled in Electrical & Control systems design, Working knowledge of ISA, NEC, NEMA, UL, NFPA, IEC, CE, API & other equivalent international standards Proficiency in using AutoCad Electrical, MS Word & Excel MS Office or the Ability to become proficient in MS Office. Familiar with the implementation of process instrumentation and control systems, electrical engineering as applicable to power/process industries Experience in design & engineering of PLC / HMI, DCS & control systems Experience in power or petroleum or process industries Ability to communicate effectively with customers/suppliers Excellent written and verbal communication skills Attend the customer / vendor interface meetings Maintain positive attitude and good organizational skills. Capability to work in teams across the company locations. Willingness to work extra hours when situation requires Ability to plan and manage multiple projects. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Participate in interdepartmental meetings as needed to facilitate the integration of design across disciplines. Provide technical support during fabrication and/or other site queries as required during fabrication, assembly & startups/ commissioning Provide support to other employees in the department as required Follow the ISO requirements, departmental and company procedures. To undertake specialized assignments as allocated by management from time to time.

As an Electrical Design Engineer, you will work in office with engineering teams of Architects and ME/EE-Engineers to help design technical solutions to meet our client s business needs. The successful candidate will work with licensed engineers and other experienced designers to design power distribution and lighting systems for manufacturing, distribution, and other industrial and commercial facilities. Responsibilities: Power utility coordination 277/480V building services Power distribution and calculations including switchboards, panel boards, transformers, wire sizing, voltage drop, conduit fill, cable tray sizing and fill, cooling calculations Selection of Motors, Drives, PLC and IO modules Preparation of design criteria, one-line diagrams and specification for electrical equipment. Selection and sizing of UPS for SCADA system and three phase inverters on site. Industrial control panel design - PLC , RIO and VFD Design wiring and conduit drawings using AutoCAD. Help resolve EE oriented Change Request Notices and Request for Information. Resolve RFIs Prepare grounding and bonding plan for new equipment. Develop electrical drawings using AutoCAD. Education: Bachelors degree in Electrical and Electronics Engineering Requirements: Minimum 6 to 8 years of Electrical panel design experience. Any Food, Beverage or Pharmaceutical Facilities or Industry Engineering experience is preferred. Hands on experience in preparation of single line diagrams and panel IGA & OGA drawings, Schematics based upon technical specifications, requirement of customer. Perform calculation & selection of Motors, Drives, AC, Load calculations & cable selections based upon application & design standards. Design Engineering, implement, maintain, and. Improve electrical instruments, equipment, facilities, Components, Products, and systems for commercial & industrial purposes. Prepare and study technical drawings, specifications of electrical systems, and customer requirements. Writing regular progress reports and presenting them to project managers and clients Knowledge of UL508A, IEC, NEMA and other standards Tools Knowledge: AutoCAD Electrical, Eplan P8 Able to produce electrical design on a multi-discipline project. Proficiency in the use of AutoCAD software is required. Must possess excellent communication and interpersonal skills, and the ability to interact with all levels of management, clients, and vendors. Must also possess good general computer skills including the use of Microsoft Excel, Word, and Outlook.

Key Responsibilities: Develop detailed electrical design documents (SLD, schematics, cable sizing, etc.) Perform calculations (load flow, arc flash, fault level, earthing, etc.) Ensure compliance with IEC, IS, NEMA, and Australian standards Provide design support throughout project lifecycle Coordinate with draftsmen and project teams for drawing completion Participate in design reviews and project meetings Support commissioning and troubleshooting as required Preferred Profile: Bachelors in Electrical Engineering (Master’s preferred) 6+ years of experience in electrical design (LV/MV/HV systems) Experience in water treatment, desalination, or process plants Knowledge of ETAP, AutoCAD, and electrical studies Strong understanding of relevant international standards Good communication and team collaboration skills

Role & responsibilities: Specification preparations, Sizing calculations, technical bid and Vendor document review, Technical Support to Quality and Commissioning team, BOM preparation. Electrical equipment knowledge for the Generator, Busducts, GCB, Transformers, MV&LV switchgear, DC&UPS system, VFD, Motors, Cable system. Preferred candidate profile: Thermal & Combined cycle Power plant, Oil and Gas. Tools: DIALUX, ACAD, SKM, ETAP, EPLAN, SP3D, E3D

Key Responsibilities: Prepare detailed electrical designs, SLDs, and schematics. Size and specify electrical equipment (transformers, cables, panels, batteries, etc.). Design HV/LV systems and layouts for substations and wind infrastructure. Conduct lighting calculations using DiaLux / DiaLux Evo . Perform power system studies using ETAP or SKM . Create cable schedules, BOQs, and technical specifications. Coordinate with internal teams, clients, and vendors. Ensure adherence to standards like IEEE, IEC, NEC, NEMA, UL .

Role & responsibilities Project scoping, planning and execution of projects in multiple product categories like Low Voltage, Switchgear, Breakers, Switches, Fuses, Capacitors, Terminal Blocks etc. Developing of test methods and test equipment requirements for complex, new or unusual products. Communicating with clients to discuss technical issues, explain UL procedures and requirements. Convey project cost estimate completion date and sample requirements. Coordinating complex in-house or external laboratory activities by preparing data sheets and instructions to technicians. Provide technical assistance in several product categories, operations or systems to laboratory and/or field staff Preferred candidate profile BE/ B tech in Electrical / Electronic Engineering or equivalent education from an accredited University / College. 6-10 years of experience in engineering / design validation / testing and certification / manufacturing etc. Proficient in various safety standards, with an emphasis on IEC, EN, UL, CSA and NEMA. Exposure to ISO/IEC 17025 are highly an added advantage . Knowledge on UL, CSA, IEC CB Scheme certification and standards like, IEC/EN 60898-1, IEC/EN 61008-1, IEC/EN 61009-1, UL/IEC 60947 Series, UL 810 & UL 1059 standards . Knowledge of IEC CB schemes and global certification would be an added advantage. Independent decision-making skills and strong structured problem-solving skills. Ability to work in a fast paced, self-directed environment, document detailed results, and Communicate test results to reviewer and customer. Strong written and verbal communication skills as well as interpersonal skills necessary to work across multiple engineering disciplines, project management, and external customers. Electronics/Mechanical testing experience. Proficient with Microsoft Office applications (Excel, Word, PowerPoint). Must be able to work on multiple projects simultaneously. Strong teamwork skills a must

Job Summary: Rishabh Engineering is looking for experienced Piping Stress Engineers to perform comprehensive stress analysis and provide technical support across piping systems in large-scale industrial projects. The candidate will be responsible for ensuring the mechanical integrity and code compliance of piping systems, supporting the engineering team through all phases of design and execution. Key Responsibilities: Perform piping stress analysis using CAESAR II and other relevant tools in accordance with applicable codes (ASME B31.1, B31.3, API, etc.). Review and interpret piping and instrumentation diagrams (P&IDs), isometrics, general arrangement drawings, and equipment data sheets. Identify critical lines and perform flexibility analysis, considering thermal expansion, seismic, wind, and dynamic loads. Provide support in selecting and designing piping supports, expansion loops, and spring hangers. Evaluate nozzle loads on rotating and static equipment and coordinate with Mechanical and Civil teams for resolution. Prepare stress analysis reports and recommend modifications where necessary. Review vendor documents and interface with suppliers on stress-related matters. Participate in model reviews and coordinate with 3D designers to ensure stress-related design criteria are implemented. Ensure compliance with project specifications, industry standards, and best engineering practices. Provide technical mentoring to junior engineers and collaborate with global teams. Key Skills & Competencies: Proficiency in CAESAR II (mandatory), with knowledge of other tools like AutoPIPE or Rohr2 considered an asset. Deep understanding of international design codes (ASME B31.3, B31.1, API 610/617, WRC 107/297, etc.). Experience with stress analysis of critical lines , nozzle load calculations, spring supports, and interaction with civil/structural. Ability to perform lift-off, slug flow, two-phase flow, PSV and relief line analysis . Strong analytical and problem-solving skills. Ability to interpret client specifications and incorporate stress requirements into design deliverables. Familiarity with 3D modeling software like CADWorx, SmartPlant 3D (SP3D) , or E3D for integration with piping layouts. Qualifications: B.E./B.Tech in Mechanical Engineering or a related discipline. 5 to 10 years of relevant piping stress engineering experience in EPC/EPCM projects. Prior experience working in oil & gas, petrochemical, refinery, or power projects is preferred. Good communication and coordination skills to work in multi-disciplinary teams. Preferred Experience: Global project exposure, working with North American or Middle East client specifications. Familiarity with Indian and international regulatory requirements and standards. Experience in modularization or brownfield revamp projects is a plus.