Get alerts for new jobs matching your selected skills, preferred locations, and experience range. Manage Job Alerts
3.0 - 10.0 years
1 - 5 Lacs
Mumbai
Work from Office
To coordinate, conduct, and documentNon-Destructive Testing (NDT) activities across all welding stages and projectrequirements , ensuring that all jobs meet therelevant code, client standards, and acceptance criteria without delaying flowor compromising safety. Key Responsibilities 1. Plan and coordinate NDT testing (in-house oroutsourced) for all welds as per project specifications, ITPs, andclient-approved procedures. 2. Ensure the availability and readiness of NDT personnel,tools, and documentation before the job reaches its inspection stage. 3. Carry out or coordinate the following NDT methods asapplicable: o VisualTesting (VT) primary inspection of weld bead, surfacedefects, undercut, and overlap o LiquidPenetrant Testing (LPT/DPT) for surface cracks in filletwelds, corner joints, and SS jobs o MagneticParticle Testing (MPT) for ferromagnetic jobs (lessapplicable in SS, but relevant for any MS assemblies) o UltrasonicTesting (UT) for subsurface and volumetric inspection incritical butt joints or heavy welds o RadiographicTesting (RT/X-ray) for full-penetration welds where specifiedby client or code o PositiveMaterial Identification (PMI) for material mix-up preventionin high-specification SS components o Hardness,Ferrite, or Surface Roughness Checks where required byQA/Welding Expert or client 4. Ensure tests are conducted only after job is fullyready avoid premature offers or repeated attempts. 5. Mark and isolate jobs pending NDT prevent them fromproceeding to next stage until cleared. 6. Coordinate with third-party agencies for witnessing andapproval where needed. 7. Maintain NDT reports, maps, and traceability documentsin proper formats linked to job ID, weld ID, operator ID, and shift. 8. Escalate repeat failures, inconsistent readings, ortest rejections to QC Lead and Welding Expert for investigation. 9. Monitor equipment calibration, validity of NDT agencyapprovals, and Level II/III certification documents. 10. Provideinspection data during client audits and walkdowns; support QA in maintainingNDT records in ISO or client formats. 11. Supporttraining of junior QC staff on NDT interpretation and reporting discipline. Responsibilities Outsidethe Scope of This Role Does not interpret test standards oraccept/reject results independently unless certified escalates to LevelII/III or QC Lead as required Does not perform welding, rework, or repair only validates results and traceability Does not schedule project flow tests must alignwith fabrication sequence and readiness Does not control quality systems but ensurestesting aligns with QA-defined ITP and project specs Qualifications Experience Diploma or B.Tech in Mechanical / Metallurgy /Welding Engineering / NDT Technician 2 + years of experience in NDT coordination or execution in fabrication or EPC projects NDT Level IIcertification (at minimum) in VT and LPT; UTand RT preferred Familiarity with ASME, AWS, EN, and ISOstandards applicable to SS fabrication Experience coordinating outsourced NDT orin-house lab teams Strong understanding of NDT documentation,mapping, and traceability Good communication for the client, agency, andshift coordination Preferred: Experience in stainless steel or infrastructure fabrication setup
Posted 3 days ago
15.0 - 24.0 years
11 - 21 Lacs
Barmer
Work from Office
We have openings for Lead NDT Engineer - Barmer Qualification : B.E/B.Tech - Mechanical Industry : Oil & Gas Experience : min 15+ years Certifications : NDT Level 2 Job Description : * Should have experience in Oil & Gas EPC/Refinery construction project. Location : Barmer If your interested for this position send your updated cv along with below details to kcharishma@meghaeng.com Total Exp: Relevant Exp : Qualification : DOB : Age : Current Company : Current location : Native : Current CTC : Expected CTC : Notice Period : Willing to relocate for Barmer location. Reason for job change: Note: 1 : Mandatory to have min 15 years exp in EPC Companies NDT Execution and all previous companies experience letters 2. Only Relevant candidate will be contacted.
Posted 4 days ago
15.0 - 24.0 years
11 - 21 Lacs
Barmer, Barauni
Work from Office
We have openings for Lead NDT Engineer - Barmer, Barauni Qualification : B.E/B.Tech - Mechanical Industry : Oil & Gas Experience : min 15+ years Certifications : NDT Level 2 Job Description : 1. 15+ years of experience in NDT (refinery/petrochemical projects) 2. Plan and execute NDT activities for refinery site execution 3. Ensure compliance with project specs, industry standards, and regulations 4. Develop and implement NDT procedures and protocols 5. Conduct and supervise NDT testing (RT, UT, MT, PT, etc.) 6. Interpret and evaluate NDT test results 7. Identify and report defects and discrepancies 8. Collaborate with construction and quality teams 9. Ensure safety and quality standards are met for NDT activities 10. Manage and maintain NDT equipment and calibration records 11. Prepare and submit NDT reports and documentation 12. Strong knowledge of NDT methods and techniques 13. Certification in NDT methods (ASNT Level II or equivalent) Location : Barmer, Barauni If your interested for this position send your updated cv along with below details to kcharishma@meghaeng.com Total Exp: Relevant Exp : Qualification : DOB : Age : Current Company : Current location : Native : Current CTC : Expected CTC : Notice Period : Willing to relocate for Barmer, Barauni location. Reason for job change: Note: 1 : Mandatory to have min 15 years exp in EPC Companies NDT Execution and all previous companies experience letters 2. Only Relevant candidate will be contacted. Thanks & Regards, Charishma . K HR Department Megha Engineering & Infrastructure Ltd
Posted 4 days ago
8.0 - 10.0 years
7 - 9 Lacs
Pune
Work from Office
Handle Pre - FAT & FAT. Will visit the sites if required. To guide and support Operation at QA/QC team. To communicate with customer . Responsible for inter departmental communication. To Face Internal & external audits. Write technical reports. Provident fund Annual bonus Office cab/shuttle
Posted 4 days ago
4.0 - 9.0 years
6 - 7 Lacs
Palwal
Work from Office
Conduct dimensional inspections using precision tools such as calipers, micrometers, height gauges, etc. Execute Non-Destructive Testing (NDT) techniques including Dye Penetrant Testing (DPT), Magnetic Particle Testing (MPT), Ultrasonic Testing (UT), or Radiographic Testing (RT) as required. Review and interpret engineering drawings, GAD s, ASME, PED standards, and fabrication specifications. Document inspection reports, noting deviations, NCRs, and recommending corrective actions. Collaborate with fabrication and welding teams to address dimensional or NDT-related quality concerns during in-process and final inspections. Participate in continuous improvement initiatives and support quality audits and compliance requirements (ISO, ASME, etc.). BE (Mech) / Diploma(Mech) NDT Level II Work-life integration Employee discounts Attractive remuneration system Flexible working hours Good development opportunities Health initiatives Mobile working
Posted 1 week ago
5.0 - 6.0 years
3 - 4 Lacs
Visakhapatnam
Work from Office
Responsibilities: * Conduct NDT inspections according to standards. * Perform welding and piping inspections with expertise. * Ensure document compliance through management and control. Free meal Accidental insurance Provident fund Relocation bonus
Posted 1 week ago
2.0 - 5.0 years
2 - 4 Lacs
Chennai
Work from Office
Use RT, MPT, UT & PT for welding inspection of heavy steel fabricated parts of mining equipments like dumpers, excavators etc. Reports preparation and analysis. Training Operators for welding certification
Posted 1 week ago
2.0 - 7.0 years
10 Lacs
Surat, Vadodara
Work from Office
Qualification: B.E./B.Tech (Mech./Prod./Fab.) with 2–5 years OR Diploma (Mech./Prod./Fab.) with 5–9 years of experience. NDE Level II certified in PT/MT/RT/UT as per SNT-TC-1A, ISNT, and ISO 9712/PCN. Send your CV to: kaushik@uppl.in
Posted 1 week ago
1.0 - 6.0 years
1 - 4 Lacs
Patna, Hyderabad, Ahmedabad
Work from Office
Hello, Position: QC Engineer Site - NDT Level - I, II, III Qualifications: Dip, BE, B Tech- Mech, Electrical, CIVIL Location: Site, Anywhere in India as per Projects Assigned Email: rghrsolutions2@gmail.com Thanks, Vijay RG HR Solutions 8976326093
Posted 1 week ago
0.0 - 5.0 years
1 - 2 Lacs
Neyveli, Chennai, Tiruchirapalli
Work from Office
B.E. / DME Both Fresher / Expn can apply Job role involves maintaining the activies in line / production and in inspection also. NDT-Level 2 certificate will be more preferable Location : Sriperambadur, Chennai Free ACC and 2 times food will be given
Posted 2 weeks ago
2.0 - 7.0 years
2 - 3 Lacs
Pune
Work from Office
Basic instrument knowledge knowledge about GD&T & NTD Level 2 Certified Updates job knowledge by participating in educational opportunities and reading technical publications, Keeps measurement equipment operating by following operating instructions
Posted 2 weeks ago
2.0 - 7.0 years
2 - 6 Lacs
Vadodara
Work from Office
Greetings of the Day..! We are one of the largest manufacturer of Pre-fabricated piping Spool, Fittings and Static Equipments situated in Karjan highway, Vadodara. Job Title: Department: Quality Control Engineer /Sr. Engineer (Piping Spool division) Educational: DME / B.Tech / B.E. Mechanical or equivalent Experience: Minimum 2 to 7 years similar industry experience must (Not consider other industry experience) Industry /Mfg. type: Pre-fabricated pipe fittings, spool & static equipments Number of vacancy - 10 Perks & Benefits: Company-provided bus transportation (from Vadodara to plant location only)* Personal medical insurance (after confirmation) Here below the job details; Role & responsibilities Stage wise QA QC Spool work Awareness of fabricated related work. Handling Q.A/Q.C. Procedures & various third Party inspection Well versed in ASME & other related manufacturing codes/standards He should have good knowledge of Non destructive (Ultrasonic testing, radiography examination, magnetic particle testing, die penetration testing, etc) & destructive examinations. Preparing of QAP in line with code/client specification Documentation as per ISO & ASME. Handling the inspection for raw material and finished products as per customer requirements. Interested candidates can share your updated resume on WhatsApp (+91 8347749538) or may sent on email id (giplhr@gujaratinfra.com)
Posted 2 weeks ago
2.0 - 5.0 years
1 - 3 Lacs
Oragadam, Thiruvallur
Work from Office
Role & responsibilities The role involves Heavy Fabrication Construction & Earthmoving Equipment Welding Inspection Dimensional & Process Inspection Final Visual Inspection Preferred candidate profile BE Mechanical with 3+ years experience Diploma Mechanical with 5+ years experience Additional preference - NDT - ASNT -Level II (PT, MT, UT, RT, VT)Certificate Have a hands on experience in Heavy Fabrication, Welding Inspection. Eligible candidates share your resume to the below mentioned email address. scshrrerecruitment@gmail.com careerscsengg@gmail.com Contact Person : Sanjeev - 8072377293
Posted 2 weeks ago
2.0 - 7.0 years
3 - 7 Lacs
Kolkata, Mumbai, New Delhi
Work from Office
MECHANICAL INSPECTOR Job Title: Inspector TPI Location: Hazira, Surat Employment Type: Contract Duration: 2 Year ( Extendable ) Client s Name : L&T / MHI Power Job Purpose: To perform inspection and quality assurance of mechanical works on behalf of the client or as a third-party representative to ensure compliance with relevant codes, standards, project specifications, and approved drawings. Key Responsibilities: Technical inspection and structural evaluation Writing detailed inspection reports Preparing and issuing release notes Handling item dispatch protocols Reading and interpreting ITPs and engineering drawings Inspection activities on vendor premises Qualification & Experience Required: Diploma or Bachelors Degree in Mechanical Engineering Minimum 4 years of experience in inspection Certified in NDT Level II Prior experience in structural inspections is mandatory Working Hours: General Shift (inclusive of report writing time) Skills: Strong knowledge of ASME, API, ASTM, and other mechanical standards. Ability to interpret engineering drawings and technical documents. Good communication, reporting, and documentation skills. Proficiency in MS Office and report preparation. How to Apply: . Please include "Mechanical Static Engineer Application in the subject line of your email.
Posted 2 weeks ago
15.0 - 20.0 years
0 - 3 Lacs
Navi Mumbai
Work from Office
Product Quality to be achieved at all stages namely • Incoming components Quality (Supplier’s components) • Process Quality • Final Product Quality Electro Hydraulic Actuators Pneumatic/ Hydraulic Actuators Must have Machine Shop Experience.
Posted 2 weeks ago
4.0 - 6.0 years
5 - 6 Lacs
Dahej, Pune
Work from Office
He should have experience in Pressure Vessel inspection , Incoming Material Inspection and aware about Material Grade, must have experience in RT testing or knowledge about WPS, WQT. Knowledge about other static equipment. Required of NDT level.
Posted 3 weeks ago
6.0 - 11.0 years
6 - 7 Lacs
Bhilai
Work from Office
Dear All, Great Opportunity for Mechanical Quality Control Engineer for inspection of Structural Steel Fabrication Works ( including inspection of raw material with proper documentation) @ Bhilai, Chattisgarh. TUV India Pvt. Ltd. (TV NORD GROUP) invites applications with the following pre-requisites: Educational Qualifications: Bachelors Degree in Mechanical Engineering (BE/ B. Tech) Professional Experience: 6+ years (minimum) of relevant experience in structural steel fabrication and inspection. Proven track record in working with: Industrial buildings Commercial structures Salary Budget: Upto 6 LPA + 10,000 Accommodation and Food Technical Skills & Knowledge: Understanding of fabrication drawings, welding symbols, and general arrangement (GA) drawings Proficiency in welding inspection (WPS, PQR, WPQ, weld mapping) The candidate is well-acquainted with ASTM and AWS standards, particularly those applicable to structural steel fabrication and welding processes. He holds a valid Level II certification in relevant Non-Destructive Testing (NDT) methods. Quality Assurance & Documentation: Knowledge of Inspection and Test Plans (ITPs) Experience in preparing Welding Reports, NCRs, RFI logs, and material traceability records Familiarity with QA/QC procedures aligned with ISO 9001 and project specifications Kindly mention the subject as Mechanical Quality Control Engineer (Location) - Buildings while sending the CV. Interested one please share your resume to samitha@tuv-nord.com or whatsapp me on 8801020300 Thanks & Regards, Amitha Sree P Dy Manager Talent Acquisition & Operations TUV India Pvt.Ltd. TUV NORD GROUP
Posted 3 weeks ago
3.0 - 8.0 years
5 - 12 Lacs
Navi Mumbai
Work from Office
Position Overview: We are seeking a dedicated and detail-oriented Quality Engineer to support our Quality Assurance and Quality Control operations. The ideal candidate will have 3-7 years of experience in fabrication and inspection of filtration systems, pressure vessels, and related process equipment. The role involves hands-on inspection, quality documentation, coordination with third-party inspection agencies, and ensuring compliance with industry standards. Key Responsibilities: Conduct in-process and final inspections of pressure vessels, filters, strainers, and associated fabrication work. Review and interpret engineering drawings, WPS/PQR, and material specifications for compliance. Prepare and maintain quality documentation , including inspection reports, test certificates, traceability records, and material test reports (MTRs). Coordinate with third-party inspection agencies (TPI) and clients during stage and final inspections. Support NDT activities including radiography, dye penetrant testing, ultrasonic testing, etc. Verify compliance with ASME, PED, IBR, and other applicable standards and codes. Participate in internal audits and assist in preparing for customer audits and QA documentation. Maintain calibration records and ensure availability of required inspection instruments. Raise non-conformance reports (NCRs) and work with production and engineering to implement corrective actions. Ensure the implementation of quality systems and continuous improvement practices across the shop floor. Qualifications & Skills: Diploma/Bachelors degree in Mechanical Engineering or equivalent 3–7 years of experience in Quality Control in a pressure vessel/fabrication-based manufacturing industry Sound knowledge of ASME Section VIII, PED, IBR , and other fabrication standards Familiarity with welding processes, NDT methods, and documentation requirements Proficient in MS Office and documentation tools Strong attention to detail and communication skills Ability to interpret technical drawings and specifications Preferred Skills: Certification in welding inspection (e.g., CSWIP, AWS-CWI) is a plus Experience working with ERP or quality management systems Exposure to Oil & Gas, Power, or Chemical process equipment inspection
Posted 3 weeks ago
5.0 - 10.0 years
3 - 8 Lacs
Nashik, Pune, Mumbai (All Areas)
Hybrid
Role & responsibilities Inspection/Quality Surveillance of site construction/ shop fabrication/ testing in crude oil / gas refinery sector or in the petrochemical/ chemicals industry or Power Sector of - pressure vessels, Heat Exchangers, Pumps, other equipment, Storage tanks, line pipes, cross country pipelines, Plant Piping, structures, materials, NDT. Preferred candidate profile NDT - ASNT / ISNT - LEVEL II / III (UT/RT/MT/PT/ VT/LT/ET ) with valid certificates Excellent inspection skills; Good interpersonal & communication skills Pressure Vessels, Equipment, Heat Exchangers, boilers. Should be familiar with manufacturing processes related to fabrication, welding control, heat treatment, inspection, testing, preservation, packing. Operation & maintenance of boilers. Welding procedure/ welder qualifications- WPS/ PQR/ WPQ Plates, Piping Components / Fittings, Flanges, Pipes, Tubes, Welded Pipes, Fasteners, Gaskets; Fully conversant with materials and material testing. Valves, Castings, Forgings API / ASTM Structural Fabrication & Erection (AWS D1.1) Piping Fabrication, NDT (B 31.3) Storage tanks, API 650; Cryogenic storage tanks API 620 Sound knowledge of National/ International Standards and codes such as IS, ASTM, ASME SECTIONS II, VIII Div.1 , IX, V; API etc. EN/ BS/ DIN/ AD 2000 Manufacture, testing and laying of oil and gas pipe line/ line pipe at pipe mill Pumps, compressors and other rotating equipment. Must have carried out/ witnessed performance tests, running trials. Knowledge of applicable codes such as API etc. Currently Working with Third Party Inspection Agency will add an advantage
Posted 3 weeks ago
5.0 - 10.0 years
4 - 6 Lacs
Mumbai, Mumbai Suburban, Mumbai (All Areas)
Work from Office
Designation : Service Coordinator Experience: 5+ Years Department : NDT Service Salary: Standard hike on current salary + Compliance benefits Job Location : Andheri (W) Rly products RM handling, Proactive person, meticulous in nature, able to quickly recall past instances, 5 - 8 years in industrial/after sales service support experience (handling customers), customer relation building ability, high competency in communication in English & Hindi. Job profile: 1) AMC Tender monitoring 2) Visits to customers & distributor 3) AMC / Royalty billing 4) Timely AMC actions 5) Preparation of AMC quotation 6) Revenue generation Job requirements: 1. Graduate from any stream 2. Advanced verbal and communication skills 3. Experience of business generation via AMC, spares, services Interested candidate may share CV on hr2@eecindia.com
Posted 3 weeks ago
7.0 - 8.0 years
9 - 10 Lacs
Chennai
Work from Office
We are inviting you to join Howden, a Chart Industries Company become a trusted and valued member of our Business Intelligence Team. AS part of this vital team, you will play a crucial role in developing and maintaining business intelligence solutions that driver data-driven decision-making across the organization.Howden was acquired by Chart Industries in 2023. Chart Industries is a leader in innovation focused on our transition to a greener energy environment. We are a leading global manufacturer of highly engineered equipment and solutions serving multiple applications in the Energy, Industrial gas end sectors. We supply cryogenic systems and have a global presence in 40 countries, and more than 11,000 employees. Howdens long heritage and technology enable this transition on a more efficient level. Our vision is to enable the vital processes of our customers and thereby promote a more sustainable world via our Nexus of Clean Strategy. What Will You Do? End to End Quality Assurance and Control activities for the Cooling fan starting from Inward material Quality Assurance to Warranty / Customer complaints handling. Need to create and maintain Quality Management System requirements in the Product line. Create and Maintain In-process PPAP for new products Create Rework procedure for FRP blades and conduct periodic Process Audits to improve the process. Liaison with Customers and TPIs for Stage clearance and Product clearance, Coordinate with internal stakeholders to adhere & meet Product, Process, QMS & Customer requirements. Your Physical Work Environment Will Require Need to be on the shop floor coordinating and overseeing activities for 5 to 7 Hrs. a day. Able to conduct NDT test (Level 2) on a requirement basis Open to travel to Customer site/office to understand and discuss Quality requirements, and observe the product running conditions and support trouble shooting of the product supplied (Approx. 30 days in a year) Your Experience Should Be... Bachelor s degree in mechanical engineering / chemical technology / Diploma in Plastic technology 7 to 8 Years Experience in Quality Assurance Activities, 2 or more years of FRP parts NDT Level 2 - UT (experience in FRP is a must) Experience in overseeing Rework / Repair activities in FRP blades. Experience in FRP Blade products is preferable Six Sigma Green Belt certification is preferable
Posted 3 weeks ago
10.0 - 13.0 years
6 - 11 Lacs
Hosur
Work from Office
We are inviting you to join Howden, a Chart Industries Company become a trusted and valued member of our Business Intelligence Team. AS part of this vital team, you will play a crucial role in developing and maintaining business intelligence solutions that driver data-driven decision-making across the organization.Howden was acquired by Chart Industries in 2023. Chart Industries is a leader in innovation focused on our transition to a greener energy environment. We are a leading global manufacturer of highly engineered equipment and solutions serving multiple applications in the Energy, Industrial gas end sectors. We supply cryogenic systems and have a global presence in 40 countries, and more than 11,000 employees. Howdens long heritage and technology enable this transition on a more efficient level. Our vision is to enable the vital processes of our customers and thereby promote a more sustainable world via our Nexus of Clean Strategy. What Will You Do? End to End Quality Assurance and Control activities for the Reciprocating Compressor starting from Inward material Quality Assurance to Warranty / Customer complaints handling. Need to create and maintain Quality Management System requirements in the Product line. Establish and maintain SOPs for QA activities to ensure quality standards & procedures are met and aligned with customer requirements. Create and Maintain In-process PPAP for new products. Liaison with Customers and TPIs for Stage clearance and Product clearance, Conduct Manufacturing and design reviews (DFMs) for new products and projects. Ability to train small teams in Quality Practices and Systems. Your Physical Work Environment Will Require Need to be in Shopfloor coordinating and overlooking activities for 3 to 5 Hrs. a day. Able to demonstrate NDT test (Level 2) on requirement basis Use of quality engineering methods in inspection Coordinate with internal/external stakeholders to adhere & meet Product, Process, QMS & Customer requirements. Open to travel to Customer site / office to understand and discuss Quality requirements, and observe the product running conditions and support trouble shooting of product supplied (Approx. 30 days in a year) Your Experience Should Be... Bachelor s degree in mechanical engineering 10 to 13 Years Experience in Quality Assurance Activities, 2 or more years in handling end-to-end Quality activities Experience in Reciprocating compressor products is preferable NDT Level 2 in RT / UT and MPI / DPT methods preferable Six Sigma Green Belt certification preferable
Posted 3 weeks ago
2.0 - 3.0 years
3 - 3 Lacs
Vadodara
Work from Office
Responsibilities: * Conduct NDT inspections using Level methods. * Ensure compliance with industry standards and regulations. * Collaborate with cross-functional teams on project deliverables. * NDT Level-2 Knowledge
Posted 3 weeks ago
3.0 - 5.0 years
3 - 7 Lacs
Ahmedabad
Work from Office
Posted On 20th Jun, 2025 : Key Responsibilities : Perform in-process and final inspections of fabricated parts (cutting, welding, machining, painting, etc.). Witness and verify welding, NDT, visual inspection, and other tests as per ITP/QAP. Prepare ITP/QAP, inspection reports, NCRs, welding reports, and test records Coordinate with third-party inspectors (TPIs) and clients during inspections Good knowledge of fabrication processes (welding, fitting, machining). Familiarity with codes like ASME, AWS, ISO, and client specifications. Ready to work in rotational shift. Qualifications: EducationDiploma/degree in mechanical engineering or equivalent. Certifications (preferred)NDT Level II. Experience45 years in a fabrication/steel structures/heavy engineering industry. Key Skills : Company Profile A leading global provider of screening and auxiliary solutions, supporting industries like water wells, environmental, energy, and more, with products like vibrating --- and wedge wire ---.
Posted 1 month ago
5.0 - 10.0 years
6 - 10 Lacs
Vadodara
Work from Office
Develop and maintain the NDT network & Qualification matrix in AP Level Drive NDT Related improvement Projects with AP Plants Ensure the Applicable standards are rollout withing the stipuated time. Cordinate with AP B&IS Plant for the investment planning towards NDT facilities Conduct frequent NDT review for the plant and suppliers and mitigate the risks. Involve in plant level escalated complaints related to NDT and support them. Visit to AP plants and suppliers to review the status related to NDT and its related projects Timely report to HQ and upadte the NDT overview in the region Timely communicate NDT Technological information within the AP NDT network Provide training to develop Level 2 and below level Qualification in the plant Support plant to create relavent test procedures related NDT Develop Local 3rd party service providers for NDT machines. Min 20% of the time for travel to AP plant & suppliers locations. Your Qualifications B.E (Metallurgy & Material Technology) or higher with experience of Minimum 10 years in a job with similar job description. NDT Level 3 qualified Good knowledge in Heat treatment processes Good working knowledge with NDT methods with relavent standards Good communication, Problem solving, team handling skills Experince in special process auditing
Posted 1 month ago
Upload Resume
Drag or click to upload
Your data is secure with us, protected by advanced encryption.
Browse through a variety of job opportunities tailored to your skills and preferences. Filter by location, experience, salary, and more to find your perfect fit.
We have sent an OTP to your contact. Please enter it below to verify.
Accenture
39581 Jobs | Dublin
Wipro
19070 Jobs | Bengaluru
Accenture in India
14409 Jobs | Dublin 2
EY
14248 Jobs | London
Uplers
10536 Jobs | Ahmedabad
Amazon
10262 Jobs | Seattle,WA
IBM
9120 Jobs | Armonk
Oracle
8925 Jobs | Redwood City
Capgemini
7500 Jobs | Paris,France
Virtusa
7132 Jobs | Southborough