237 Ndt Jobs - Page 8

Responsible for oversee and manage welding projects from initiation to completion, ensuring adherence to quality and safety standards. Collaborate with fabrication, and quality control team, to optimize welding processes and resolve technical issues.

Responsible for Calibration of Composites parts manufacturing assembly to achieve quality targets Execute QC activities that translates to reduction of COPQ(Cost of Poor Quality) and wastage Ensure the highest quality output that meets customers expectation in the most cost effective manner, through Calibration quality control activities along with action planning for identified gaps Supervise the Calibration activities Responsible for all the document related activities as per QMS requirement and Aerospace standards. Carry out In process inspection in each stage of process and Final Inspection and confirm the key characteristics Ensure each stages of operations are closed in Route card/ oracle in timely manner Verify the Configuration Status of each part Ensure to achieve Process capability for CTQ parameters Provide on job training and assistance for new joiners in the team. React productively and handle other essential duties or tasks as assigned. Ensure adherence to business excellence processes and principles in all activities Collect quality data for identification of trends and areas for improvement for action planning to fill the gaps Coordinate with the automation team, to identify use cases , and drive automation initiatives within the section Suggest and use of the latest technologies and tools for quality control measurement Attend MRB discussions, Support for Root cause analysis Visit to customer/Supplier locations for clarification of queries if any Understand and follow up for entire Testing activities (Mechanical testing, Incoming, Chemical and NDT). attend DWM meeting, Sunrise meeting.

Ultrasonic Testing (UT) & Radiographic Testing (RT) level II qualification and having good knowledge of NDE techniques. Thorough knowledge of NDE techniques, UT in particular is required, Pressure Vessel manufacturing & NDE. Knowledge of ASME codes

Key responsibilities for QC Engineer : Monitor and ensure compliance with QAP (Quality Assurance Plan), ITP (Inspection & Test Plan), and WPS (Welding Procedure Specification). Perform stage-wise inspections: material inspection, fit-up, welding, NDT, painting, and final inspection. Ensure product quality as per drawings, standards, and client specifications. Prepare and maintain quality documents: WPS, PQR, WPQ, weld logs, inspection reports, material traceability records. Coordinate with third-party inspectors and clients for approvals and stage inspections. Supervise and review NDT like radiography, dye penetrant, magnetic particle, and ultrasonic tests. Interpret NDT reports and coordinate with agencies for compliance and certification. Ensure welders are qualified and welding activities are performed as per approved procedures. Monitor preheating, interpass temperature, and post-weld heat treatment (if applicable). Coordinate with client and third-party inspection agencies (like BV, Lloyds, TUV) for stage inspections and final clearance. Key responsibilities for Production Engineer : Supervise day-to-day fabrication activities (cutting, bending, welding, assembly). Ensure components are fabricated as per approved drawings and QAPs. Monitor the use of materials, consumables, and tools efficiently. Prepare and execute production plans to meet dispatch deadlines. Coordinate with planning and purchase teams for raw material availability. Ensure quality standards are maintained during fabrication. Conduct in-process inspections and support QA/QC audits. Supervise and guide technicians, fitters, and welders. Allocate manpower based on workload and priorities. Maintain fabrication progress reports, weld logs, and daily production records. Prepare NCRs and assist in root cause analysis for rework or defects. Ensure workers use PPE and safe work practices are followed on the shop floor. Review fabrication drawings, suggest corrections if needed. Coordinate with design and QA/QC departments for technical clarifications. Preferred candidate profile Thorough knowledge of fabrication and welding standards (ASME, AWS, IS). Understanding of NDT techniques and interpretations. Ability to read and interpret fabrication drawings and QAPs. Strong analytical, communication, and documentation skills. Proficient in MS Office and familiar with quality management systems. Sound knowledge of fabrication processes (welding, cutting, machining). • Familiar with fabrication codes (IS, ASME, AWS, etc.). Experience in handling fabrication of heavy structures, vessels, or platforms. Proficient in reading engineering drawings. Strong communication and leadership skills. Working knowledge of MS Office, AutoCAD/SolidWorks is an advantage. Required Qualifications : Diploma & Bachelors degree in Mechanical / Production / Industrial Engineering or a related field. 3–4 years of experience in a production or manufacturing environment. Strong understanding of manufacturing processes, Machining.

Planning and Co-ordinating with execution and client Report preparation and closing from client Inspection IMIR preparation

For further information, please call -8050070079 who should posses NDT level 2 certification and should be well versed with all the quality measures. Also should own a 2 wheeler with a valid driving license

We're looking for an experienced Quality control Faculty to deliver specialized training in Oil & Gas Quality Assurance, NDT, Industrial Piping, and Welding technologies. Apply if you have a strong industry background and a passion for teaching . Required Candidate profile * Bachelors or Diploma in Mechanical Engineering * Minimum 2 years experienced in Quality control/Assurance *Experience in Oil & Gas(Upstream/Midstream/Downstream) is a plus Perks and benefits * Other Benefits and allowances are provided

Responsible for overall outsourced items. To make Inspection Test Plan (ITP) of all the items. Responsible to standardize ITP for all regular incoming items. Inspect the material at vendors place as per ITP and accordingly give release note for materials to be dispatched. To check all the documents, test certificates as per requirement. Has to maintain inspection report for each and every material. Conduct stage-wise inspection at vendor’s place on critical outsourced products. To submit all the inspection reports to QC Head before the material’s inward take place in the factory. To monitor outsourced job wok. To understand the requirement of each job that is being outsourced from the concerned department. Maintain documents as per ISO norms. To submit weekly/bi-weekly report of all inspections carried out (in brief)

Fabrication Head Anand | Glasslined Process Equipment Role Purpose To enable the organization to reduce the waste from the various ongoing processes/systems and a sustainable growth on year on year. Role Context HLE Glascoat Limited is a leading manufacturer of process equipment for the chemical and pharmaceutical industries. We are market leaders in Filtration and Drying Equipment and are a leading manufacturer of Glass Lined Equipment globally. We manufacture a wide range of chemical processing equipment in an equally wide range of materials for some of the most demanding applications. We are introducing new products in the market to cater same set of customers. Over the last 40 years, our consistently high quality, and our commitment to solving our customers unique process requirements has helped us build a solid reputation as a preferred supplier of process equipment. Role Location Anand, Gujarat Internal Designation HOD - Fabrication Team Size / Individual Contributor Can handle the team size of 300 Nos. Reporting to Head Manufacturing Deliverables Safety, Quality, Delivery and Cost Core Performance Metrics Develop systems and processes that track and optimize productivity and standards, metrics and performance targets to ensure effective return on assets Non-negotiable 1 Basic qualification - B.E. Mech. 2 More than 15 years of experience in pressure vessels manufacturing or similar kind of field 3 Should have handled the workforce of more than 300 Nos. 4 Awareness of all fabrication standards ASME, PED, DIN AWS etc., 5 Knowledge about the vendor development 6 Cost and budget calculation knowledge 7 NDT awareness 8 Knowledge of latest welding technology & all welding process like GTAW ,SAW ,SMAW, FCAW, GMAW 9 Knowledge of material safe material handling Additional Details: Plan, organize, direct and run optimum day-to-day operations to exceed our customers expectations Increase production, assets capacity and flexibility while minimizing unnecessary costs and maintaining current quality standards Be responsible for production output, product quality and on-time delivery Allocate resources effectively and fully utilize assets to produce optimal results Effective monitoring of production activities and trigger corrective actions Share a trusting relationship with workgroup and recruit, manage and develop plant staff Collect and analyse data to find places of waste or overtime Commit to plant safety procedures Develop systems and processes that track and optimize productivity and standards, metrics and performance targets to ensure effective return on assets Address employees’ issues or grievances and administer collective bargaining agreements Influence and learn from below Stay up to date with latest production management best practices and concepts Implement standard housekeeping practises at shop floor like 5S Analytical mind set for effective utilization of key resources in production Lead by example https://www.glascoat.com

Company Description Saroj Tiny Tech India Pvt Ltd (STTIPL) offers end-to-end turnkey solutions for resource recovery and renewable energy across India We specialize in designing and implementing ETP, STP, WTP, and ZLD systems to ensure efficient waste and water management Our innovative solutions help industries achieve sustainability and compliance with environmental regulations Role Description This is a full-time on-site role for a QA/QC Engineer located in the Ahmedabad Area The QA/QC Engineer will be responsible for ensuring quality standards are met throughout the production process Daily tasks include conducting quality audits, managing quality control processes, performing inspections, and overseeing quality assurance activities The role requires coordination with various departments to ensure compliance with industry standards and regulations Qualifications Strong skills in Quality Control and Quality Management Experience in Quality Assurance and Quality Auditing Proficiency in conducting Inspections and managing compliance Excellent analytical and problem-solving skills Ability to work on-site in the Greater Ahmedabad Area Bachelor's degree in Engineering or related field Experience in the resource recovery or renewable energy industry is a plus QA/QC Engineer Profile :- Roles & Responsibility (Not limited up to this) Key Responsibilities :- Inspection & Testing Raw material Inspection (Pipes, Plates, Sheets, Channel, Angle Sections, Valves ,flanges, Pipe fittings & other store items require inspection In Process Inspection of Structural fabrication, Heavy fabrication, Vessels, Tanks etc- Final stage inspection Inspection of coating & painting Defect Detection & Analysis Corrective & Preventive analysis (CAPA) Documentation & Reporting Continuous improvement (i e- 5S, 7QC, KAIZEN) NDT (Non Destructive Testing) Level 2 Welding Inspection (GTAW, TIG, MIG, SMAW) Ability to read Engineering Drawings & Technical Specifications BOQ, BOM Read & interpretation of Engineering Drawings & G & T Good Communication skills & ability to effectively within a team Basic computer skills to input data & generate reports Ability to work in a Team Work Location:Dhamatwan, Nr Bakrol Ahmedabad Experience: 2 to 5 Years Technical Proficiency :- Use of Instruments measuring tape, DFT meter, Vernier, welding Gauge, micrometer, NDT preferable, Measurement & Inspection Soft Skills:- Ms Office, Mail Communication, ERP, Basic Communication skills Language Proficiency: Hindi, Gujarati, English Basic Qualifications:- Diploma/ b-e in Mechanical engineering Diploma in Fabrication NDT Level 2 Kindly share your CV on mail id as below:- hr@sarojtinytech com jd@sarojtinytech com production@sarojtinytech com Show more Show less

Requirements: Should have managed tests/ examination like Microstructure Examination, Failure investigation, Heat treatment, FMEA, IATF Core Tools Knowledge, NDT Testing. Candidate should be of metallurgy profile from Automobile/Auto Component or Steel Industry. Job Description: Preparation of Technical delivery conditions for different grades of material. Study MFR from supplier and confirmation on MFR. Supplier communication for Non-conformance, CAPA follow-up. Supplier selection based on quality, section and grade for RM ordering. Supplier Audit and ratings. Study all furnaces behaviour with travelling thermocouple readings, SCADA report Study. Monitoring of hardening cycles and furnace behaviour through hardness readings and Metallurgical inspection, revision in HT cycles. Understanding of characteristic of quenching oil cooling curve. Provide HT cycles for new product development. Online Failure study and root cause analysis. Verification of the reports of microstructure examination of raw material for chemistry, inclusion rating, grain size, microstructure, decarb in RM inward stage and process. Technical discussion with management for any issue or customer complaint. Handling of customer audits. Communication with technical consultant in case of any issue. Study customer standard and confirm the feasibility of mechanical and metallurgical requirements. Study heating parameters of parabolic and HT furnace to achieve desired properties. Provide technical know how to handle new grade starting from RM to Shot peening Detailed failure investigation of new product developed failed parts with proper presentations. Communication with marketing and customer regarding customer complaint Failure investigation and provide failure report (CAPA). Implement and monitoring action taken after CC. To do research in any problem related to metallurgy and provide technical knowhow. Monitoring QA Lab functions. Understanding of working function of Metallurgical microscope, Spectrometer, Vickers hardness testing and XRD. Preparation of checklist, SOP and WI for all lab equipment's. QMS check list for Lab (AMC, calibration plan, Breakdown history etc.). CO - ordination with 3rd party for inspection and testing queries. Participation in thermocouple validation for furnace. Increasing in-house testing facility to reduce dependency on external testing agency. Perform regular check on heat treatment process sheet and ensure for no deviation Monitoring Routine calibration of Laboratory equipment's Participate and accountable for quench media testing and its specific control Work on ISO/IAFT/ QMS activities Practice safe working techniques and adhere to environmental, health and safety (EHS) policies, guidelines, and procedures CQI-9 to be maintained and implemented for Heat Treatment. Any specific skills/competencies required : MS Office, Advanced Excel, Power Point.

Role & responsibilities Job Role and Responsibilities Coordinate with the Design team to ensure welding feasibility, proper symbol representation, welding adequacy, and support for FM/FMEA activities. Review and authorize Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), and determine appropriate welding methods based on materials and environmental conditions. Supervise and authorize trials and experiments to develop innovative welding methods and equipment. Inspect weld quality, analyze defects, and provide recommendations for improvement. Offer technical support and training to welders and supervisors to enhance skills and performance. Manage welding projects, ensuring timely completion within budgetary constraints. Stay informed about industry advancements and integrate modern welding technologies. Verify and authorize welder qualifications as per relevant code requirements. Ensure compliance with customer requirements and applicable national or international standards in welding and related activities. Address non-conforming outputs and take necessary actions in consultation with the HOD, Quality In-charge, Design, or Cross-Functional Team (CFT). Support vendor development initiatives to achieve high-quality welding outputs. Preferred candidate profile Required skill: Minimum 15 years welding experience GMAW,SMAW,SAW,FCAW,GTAW knowledge NDT and DT knowledge (RT,UT,PT,MPT) 7 QC tools CSWIP Perks and benefits

Role & responsibilities B.E. - 5 to 10 Years Experience in QA/QC Diploma - 7 to 12 Years Experience. NDT ASNT Level-2 in RT, UT, PT, MT & VT. Inspection of Rotating and static Equipment QA/QC for Rotating Equipment (Rotary Equipment) e.g. Pump, Compressors, Fan, Blowers etc. Static equipment (specifically in Reactors, Heat Exchangers & Pressure Vessel) and its manufacturing / inspection sequences from raw material to final painting and Packing. Candidate with field inspection experience. knowledge in manufacturing, assembly, inspection/testing and Preservation process of main/various sub-ordered parts for static equipment.

vendor site/freelance eng. inspection Eng.may undertake,upon request from a customer after being authorized by company or through appointment directly by company,to perform service for com. Communicate with vendor& client&carry the inspection on site Required Candidate profile Approach toward execution of the project–develop relationship with various stakeholder to get beforehand information for better planning Project invoicing, monitor T&E NDT Level–II in RT, MPT,UT & DPT

Mechanical engineer with 3 to 7 years of experience, any MNC company, crusher /screening machinery, Quality Control/Quality Assurance, for a German MNC, office in Chennai & Kolkata, salary 30k to 50K. Immediately joining preferred.

About Company It's a large conglomerate in statin-less steel manufacturing. Position Title: Quality-Head Location: Boisar Qualification : B.E./B.Tech in Metallurgy / Mechanical Engineering (preferred); M.Tech or post-graduate specialization in Quality / Metallurgy is a plus. Certifications: ISO 9001, ISO/TS/IATF 16949 Internal Auditor; Six Sigma Green/Black Belt certification preferred. Experience : Minimum 15 years of experience in Quality Assurance and Control in a heavy forging / steel manufacturing industry. Minimum 2-5 years in a leadership role managing quality of ingot-based forging using large hydraulic press machines. Hands-on experience with mechanical and metallurgical testing, ultrasonic testing (UT), and NDT. Job Overview The Quality Head will be responsible for establishing and managing the Quality Control (QC) and Quality Assurance (QA) systems and processes across the entire round bar forging operations. This includes overseeing the quality of ingot-based production using HBE 2500 and HBE 3000 hydraulic open die forging machines, ensuring compliance with customer specifications, industry standards, and applicable regulations. The role is critical to driving continuous improvement and ensuring zero-defect delivery. Key Responsibilities: Strategic & Leadership Responsibilities: Define and implement the plant-wide Quality strategy aligned with the business goals. Lead and develop a team of QA/QC engineers, metallurgists, and inspectors. Establish and drive a culture of quality, safety, and continuous improvement. Operational Quality Control: Monitor and control quality across the forging process from raw material (ingots) to finished round bars (bright bar). Supervise and validate inspection activities at each stage: pre-forging, forging (HBE 2500/3000), heat treatment, machining, and dispatch. Ensure that round bar forging processes are executed as per defined SOPs, process sheets, and control plans. Review and analyze process parameters and deviation reports, and implement corrective actions. Testing and Metallurgical Evaluation: Ensure mechanical, dimensional, and metallurgical testing (UT, MPI, hardness, tensile, impact, grain flow, microstructure, PMI, etc.) are conducted as per customer and standard requirements. Oversee calibration and upkeep of testing instruments and lab equipment. Documentation & Compliance: Ensure complete documentation of quality records, process certifications, and test reports. Maintain traceability of materials and ensure compliance with ISO 9001 and other applicable certification. Ensure product and process conformity to national and international standards such as ASTM, DIN, EN, JIS, and customer-specific specifications. Customer Focus and Audits: Act as the quality liaison for customer audits, approvals, and visits. Address and resolve customer complaints using root cause analysis tools (8D, Fishbone, 5-Whys). Conduct internal audits and supplier quality audits, ensuring corrective actions are closed effectively. Continuous Improvement: Implement and lead Lean Six Sigma, Kaizen, and 5S initiatives in the quality domain. Drive productivity through quality improvement projects and scrap/waste reduction. Qualifications: Education: B.E./B.Tech in Metallurgy / Mechanical Engineering (preferred); M.Tech or post-graduate specialization in Quality / Metallurgy is a plus. Certifications: ISO 9001, ISO/TS/IATF 16949 Internal Auditor; Six Sigma Green/Black Belt certification preferred. Experience: Minimum 15 years of experience in Quality Assurance and Control in a heavy forging / steel manufacturing industry. Minimum 2-5 years in a leadership role managing quality of ingot-based forging using large hydraulic press machines. Hands-on experience with mechanical and metallurgical testing, ultrasonic testing (UT), and NDT. Key Skills & Competencies: Strong understanding of forging process, heat treatment cycles, and metallurgical behavior of steels. Sound knowledge of mechanical and NDT inspection methods. Proficiency in statistical process control (SPC), FMEA, PPAP, APQP. Analytical mindset and ability to drive root cause analysis and CAPA. Leadership and team development skills. Good communication, documentation, and customer handling abilities.

Inspection of SS& CS fabrication, welding, inspection & testing related to structural / piping / vessel Level – II or III certification from BARC / ISNT/ ASNT in – RT, UT, LPT, VT &Leak Testing and shall have minimum three years’ field NDT exp.

Role & responsibilities Working will be as Painting Supervisor

Role & responsibilities Verify engineering specification for any given assembly or subassembly and detail part & Prepare Quality Plans Inspection of parts against the drawing requirements Coordinate with internal stake holders to improve the process Participate in RCCA and follow up on action closure Hands on MS office tools is mandatory Knowledge on APQP is desirable venkateswarlu k 9676590526

Role & responsibilities Carrying out inspection as per inspection and test plan for Pipe Spool Fabrication. Material verification and fit-up checking Coating and Blasting Inspections Reviewing Procedures for Quality Assurance Welding procedure assignment for Welding visual inspection Radiography/AUT Marking including lot formation Radiography Film Reviewing and/or witnessing AUT Final Clearance and certification (Online through application) Preferred candidate profile Candidate should be a Diploma holder or Graduate in Engineering field with minimum 3 years of experience in Quality Inspection. Should have knowledge on ASME B 31.3, Chapter V and VI for PWHT and hardness checking and Radiography/UT/PT/MPT inspection. Knowledge on Common Materials including Different grades of carbon steels covering LTCS, NACE, different grades of SS covering 304, 304L, 316, 321 and 347, Different grades of LAS steels covering P11, P22, P5, P9 and P91. NACE Level II and Level III for Coatings Welding Inspection and acceptance as per ASME Sec IX. NDT Level II Should have ASNT/ISNT level II certifications Interested candidates, please send CV to arunkumar.choudhury@sgs.com

Development of WPS/PQR as per required codes for qualification (ASME Sec IX & EN ISO 15614-1) & client dealing for its approval. To Qualify Welders & Welding Operator as per required code for qualification (ASME Sec IX,D 9606-1,EN ISO 14732) & client dealing for its approval. Respond to sales query at enquiry stage related to welding. Estimation of Welding Consumable for Job. Qualify multiple vendor/ supplier related to welding consumables. Audit the shop for compliance & use of approved/qualified welding procedure & welder as per requirement of job. To make repair procedures for fabrication if required. Make UT/RT failure analysis and take preventive actions. Provide training to shop supervisor & welders about code related to welding & trained Welders in multi process for multi skilling. Plan improvement in welding processes and implement in coordination with team.

Key Responsibilities: Conducts visual, dimensional and geometry inspection to ensure the quality of finished products in fabrication and machine shops and at vendor end. Determines and uses appropriate inspection processes and instruments to confirm assigned products and parts meet drawing / ITPs/QAPs/Control Plan / Specifications. Conducts stage inspection like fit-up/tack weld, assembly, welding, NDT, leak test, in fabrication shop. Perform stage inspection and final inspection in machine shops for geometrical, linear and angular dimensional inspection and witness to different customers. Preparation of QA documents with reference to drawing/QAPs/TDCs and customer approval/clearance. Review of supplier inspection reports and liaison with subcontracting department. Coordinate with respective departments for day-to-day inspection calls. Communicate day-to-day inspection to respective departments by verbal and e-mail/application. Full fill the company / ISO 9001 requirements. Coordinating with customers on stage wise/final inspection Preparation of Quality dossiers as per QAP/ITPs. Reporting to section In Charge/Quality Head. Technical Skills: Knowledge of inspection and measurement techniques and equipment, independently and organized manned within stipulated time at workshop/supplier place. Knowledge of differentmaterial, fabricationprocesses, welding symbols and machining symbols. Through knowledge in various Indian and international standards / ASME Codes. Knowledge on assurance of geometrical parameter and dimensions inspection in job against the given specification. Experience with different measuring instruments for its specific applications. Knowledge on basic maths skill that required proving by calculation, Ability to read and interpretation of fabrication and machining drawings, control plan and specifications Shall have good verbal and written communication skills. Proficient in Microsoft Word/Excel or similar software to prepare reports Proficient in preparation of MIS and PPT Qualification and work on hand experience in NDT methods like UT.LPE/MPT etc. Proficient in supplier quality inspection and management. Knowledge of inspection methods, measuring instruments, drawing, GD & T symbols IMS, 5S and Safety Through knowledge in ISO 9001 system requirements. Educational qualification: Throughout should be minimum 60%, Diploma/Degree-Mechanical required.

1. *Quality Planning*: - Develop and implement a Quality Management Plan (QMP) tailored to the project, outlining quality standards, procedures, and objectives. - Define quality control and assurance processes, including inspection and testing protocols. - Ensure compliance with relevant industry standards (e.g., ASME, ISO, ANSI) and project specifications. 2. *Quality Assurance*: - Establish systems to monitor and verify that all mechanical work adheres to design specifications, drawings, and contract requirements. - Conduct regular audits of processes, materials, and workmanship to ensure consistency and compliance. - Coordinate with engineering and design teams to resolve any discrepancies in specifications or drawings. 3. *Quality Control*: - Oversee inspections and testing of mechanical components, such as piping, HVAC systems, pressure vessels, and machinery, to ensure they meet quality standards. - Verify that materials used meet required specifications (e.g., material certifications, welding standards). - Monitor installation processes to ensure proper techniques and adherence to tolerances. 4. *Documentation and Reporting*: - Maintain detailed records of inspections, tests, and quality audits, including non-conformance reports (NCRs) and corrective actions. - Prepare and submit quality reports to project stakeholders, including clients and regulatory bodies. - Ensure traceability of materials and components through proper documentation. 5. *Compliance and Standards Enforcement*: - Ensure adherence to local and international regulations, codes (e.g., ASME B31.3 for piping), and safety standards. - Liaise with third-party inspectors or regulatory authorities to facilitate certifications and approvals. 6. *Training and Team Coordination*: - Train project personnel on quality standards, procedures, and best practices. - Collaborate with site supervisors, engineers, and contractors to address quality issues promptly. - Promote a culture of quality awareness across the project team. 7. *Non-Conformance Management*: - Identify and document deviations from quality standards. - Develop and implement corrective and preventive actions to address non-conformances. - Conduct root cause analysis to prevent recurrence of quality issues. 8. *Supplier and Vendor Quality Management*: - Evaluate and audit suppliers and subcontractors to ensure their materials and services meet project requirements. - Verify that procured mechanical components comply with specifications before use. 9. *Risk Management*: - Identify potential quality risks in the project and develop mitigation strategies. - Monitor critical activities, such as welding, pressure testing, and equipment installation, to prevent defects. 10. *Client and Stakeholder Communication*: - Act as the primary point of contact for quality-related matters with clients, consultants, and third-party inspectors. - Ensure client satisfaction by addressing quality concerns promptly and effectively. Preferred candidate profile

Urgently looking for QC Engineer-Aerospace in Walchandnagar Industries Limited at Walchandnagar,Baramati location Job Description Job Title- QC Engineer Department- Quality Division- Aerospace Reporting to Functional Head Location- Walchandnagar Reportes - SS/ Inspectors Experience - 2 to 4 Years Qualification- DME /BE(Mechanical) Critical Skills & Personal Attributes Knowledge of Aerospace jobs requirement. Exposure to Aerospace environment. NDE Level (PT/MPT/UT/RT/VT) Good drawing readings skill Target oriented / Team work Sincere & Hardworking, Honest Main responsibility Preparation of Quality assurance plan/Inspection formats/Procedures/Check list etc Inspection area- Raw material inspection. Inspection area- In-process & Final Inspection at shop as well at vendors end. Interaction with TPI/ISRO/DRDL/HAL inspector for acceptance of the assigned job. Timely compilation of the documentation. Knowledge Knowledge of ASME section and AERO Standards Knowledge of Aerospace and Missile job requirement, Hydro Test and Proof Pressure Test. Knowledge of Advanced inspection techniques like optical/Laser tracker/CMM etc Knowledge of SAP system Problem solving techniques Awareness for IMS/ISO standards etc Work Styles Integrity Job requires being honest and ethical. Dependability Job requires being reliable, responsible, and dependable, and fulfilling obligations. Analytical Thinking Job requires analyzing information and using logic to address work-related issues and problems. Attention to Detail Job requires being careful about detail and thorough in completing work tasks. Advanced troubleshooting and multi-tasking skills Job requires a high level of problem-solving skills and ability to do multi-tasking

1) MIG & TIG welding tasks 2) Ensure welding meets quality & safety standards 3) Maintain WPS & PQR documentation. 4) Inspect welds visually & via NDT as needed 5) Train and upskill welders. Qualification: Diploma or Degree in Fabrication Engineering