18 Nadcap Jobs

We Are Hiring Production Manager / Senior Manager Location: Narsapura Industrial Area, Kolar Interview Mode: Face-to-Face Only We are looking for an experienced Manager/Sr. Manager - Production to lead our Special Process Section . The ideal candidate will be responsible for production planning, team leadership, cost control, and ensuring high-quality output while managing high-volume, multi-mix sheet metal parts. Key Responsibilities: Lead SST section operations: manage equipment, resources, and production schedules Ensure KPI achievements: Production Plan vs Actual, FTR, Operating cost, resource utilization Maintain compliance with EHS, NADCAP, Airbus & Boeing standards Drive process improvement and operational excellence Coordinate with cross-functional teams: Quality, PPC, Engineering Handle customer audits and maintain communication standards Qualification & Experience: Education: B.Tech (Chemical Engineering preferred) or Equivalent Experience: Minimum 15 years in Aerospace / Automotive industry Prior experience in special processes like: TSA, BSA, CAA, Hard & Sulphuric Anodizing, Alodine, Passivation, Pickling, Chemical Milling Strong knowledge of jigging concepts, aerospace quality standards Exposure to NADCAP audits Good leadership, planning, and team management skills Reasonable communication and inter-department coordination Interested candidates, please send your resume to: thanuja@delighthr.com Subject Line: Applying for Production Manager/Senior Manager Include in the email body: Current CTC Expected CTC Notice Period Current Location

Lead the SST section and responsible of overall maintaining equipment's, managing resources, running production as per production plan and delivering as per customer demand Achieving production target as per da Achieving OTD for all customers

Key Skills: Cable Harness, NADCAP, APQP, Cabinet Assembly, Engineering Change Management Roles and Responsibilities: Lead the development of new aerospace products from concept to production. Ensure products meet internal and customer quality standards through all stages of development. Coordinate with internal departments and customers for successful execution of engineering projects. Plan and allocate resources based on project complexity and timelines. Interpret customer requirements, review drawings, and create engineering documentation (BOM, QP, PFC, FMEA, etc.). Support APQP processes through development of FMEA, control plans, flow charts, validation plans, and timing charts. Drive continuous improvement through technical guidance, audits, and internal reviews. Handle NADCAP audit readiness and compliance for wire harness processes. Perform engineering change management and secure customer approvals for major deviations. Review and finalize BOMs, technical change matrices (TCM), and investment lists. Ensure effective communication with customers regarding new projects and clarifications. Track, monitor, and report project progress through tools like Touchbase. Lead pilot production phases and ensure successful technology transfer to production. Validate dispatched samples with customer and oversee APQP document release for mass production. Review and implement CFT (Cross-Functional Team) feedback to enhance product quality and performance. Key Performance Indicators (KPIs): Number of projects approved in the first attempt Projects delivered within agreed timelines Quality benchmarks achieved post initial production batches Actual vs. budgeted project expenditure Achievement of NPD sales targets Engineering compliance in QMS audits Status of active projects in Touchbase Resolution rate of production-related issues Implementation of customer-requested changes Number of Continuous Improvement Projects (CIPs) completed Skills Required: Experience with cable harnesses and cabinet assembly. Familiar with NADCAP audits and APQP processes. Ability to read and understand drawings and BOM. Experience with FMEA and SAP. Experience in managing projects and leading a team. Ability to communicate with customers and manage requirements. Good with Excel and PowerPoint. Experience with project management tools. Strong written and verbal communication skills. Knowledge of engineering standards and audits. Education: Bachelor's Degree in related field

Job Title: Quality Manager - Special Process Location : Devanahalli, Aerospace SEZ, Bangalore Qualifications: BE Chemical Engineering / M.Sc. Chemistry Desired Experience: Around 15+ Yrs of experience in Quality function in Aerospace parts Special processing (HT, CP, NDT) Work Experience: Total experience of 15+ years in which he should have worked for at-least 10 years in plating shop. Required Knowledges and Skills : Vast knowledge on chemical processing of aerospace components. Technical Skills : Extensive knowledge of NADCAP requirements for Chemical Processing (CP), Heat Treatment (HT), and Non-Destructive Testing (NDT) processes. In-depth understanding of AS9100 requirements for aerospace quality management. Accountable for overseeing the Quality Management System (QMS) and ensuring compliance with NADCAP requirements. Responsible for coordinating third-party audits and customer audits to maintain quality standards and certifications. Tasked with preventing customer escapes by implementing robust quality control measures. Lead internal audits, pre-NADCAP audits, and the closure of non-conformance reports to enhance process compliance. Drive the implementation of new processes in alignment with industry standards. Enforce strict process adherence to maintain quality and consistency. Monitor and control internal rejection rates to reduce COPQ and improve efficiency. Assess the effectiveness of corrective actions and make necessary adjustments. Identify training needs for team members to enhance process quality and efficiency. Verify and approve test plans, matrices, procedures, work instructions, and periodic test results. Maintain control over product quality to meet and exceed customer expectations. Personal Skills : Self-motivated and willing to take on new challenges and Lead team. Strong communication skills Target Companies: Special process for Aerospace products Position Details Key Accountabilities: List the key areas of responsibility Accountable and manage overall Shop Floor Quality Activities Reducing rejections by initiating corrective actions along with Production. Work for achieving Zero Customer complaints by revisiting the process and inspection techniques. Work on to achieve & improve process capability along with Engineering for all the products. Supporting & assisting NPD activities by early involvement during development. Reporting: The position reports into the Head Quality Aerospace Sowmya Samvith Technologies 9844188855

Job Description - Quality Engineer Develop, implement, and maintain quality assurance protocols and systems aligned with aerospace standards (e.g., AS9100, ISO 9001). Conduct root cause analysis and lead corrective/preventive action (CAPA) processes for non-conformances. Review engineering drawings and specifications to ensure quality requirements are defined and achievable. Support internal and external audits, including customer and regulatory body inspections (e.g., FAA, EASA). Work closely with production and engineering teams to identify quality issues and implement improvements. Manage First Article Inspections (FAI) per AS9102 standards. Develop inspection and testing procedures and train quality inspectors and operators. Review and analyze quality data, metrics, and KPIs to support continuous improvement initiatives. Participate in supplier quality management including audits, qualification, and performance evaluations. Ensure compliance with customer-specific requirements and industry standards. Required Qualifications: Bachelors degree in Mechanical, Aerospace, Manufacturing Engineering, or related field. 3+ years of experience in quality engineering, preferably in the aerospace or defense industry. Strong knowledge of AS9100/ISO 9001 quality management systems. Experience with tools like FMEA, PPAP, APQP, SPC, and MSA. Proficient in interpreting engineering drawings, GD&T, and technical specifications. Familiarity with manufacturing processes such as machining, assembly, and composites. Strong analytical, communication, and problem-solving skills. Proficient in Microsoft Office and quality management software. Preferred Qualifications: Certified Quality Engineer (CQE) or Six Sigma Green/Black Belt certification. Experience with NADCAP processes and requirements. Knowledge of aerospace regulatory requirements (FAA, EASA).

Role & responsibilities SPECIAL PROCESS- Engineering / Production / Quality / NDT / Business Development: Knowledge of chemical process like Anodizing, Plating, Painting. Nas 410 l-II Certificed Inspector in PT & MT. Experience in Chemical Processing production line. Estimation and Costing of Chemical Process. Expert in reading Engineering drawing and specification. Better knowledge on Surface Treatment testing specifications and Instruments. Knowledge on AS 9102, AS9100, NADCAP, Airbus and Boeing Requirement. Engage with new customers and explore new business opportunities. Qualification : Diploma / B.E/ B.TECH : Chemical Engineering or Mechanical Engineering. Experience : 2 - 4 Years Preferred candidate profile Who have experience in Special Process Aerospace Manufacturing industry Perks and Benefits Statutory Benefits such as a Bonus, Gratuity, Insurance, Canteen & Transportation Contact Person- Manoj -8618656208

Job Description Summary The NAS410 CR Level 2 - Deputy Engineer Aviation is responsible for establishing and continually improving customer satisfaction as per NADCAP , AS9100D, & relevant customer & regulatory approval norms. The employee will be responsible for NDT inspection operations which include addressing the key Quality deliverables in the COE including day to day process operations, Issue Resolutions , Production Alignment & Personnel skill development. Job Description Company Overview Working at GE Aerospace means you are bringing your unique perspective, innovative spirit, drive, and curiosity to a collaborative and diverse team working to advance aerospace for future generations. If you have ideas, we will listen. Join us and see your ideas take flight! Site Overview Our Multi-modal Manufacturing Facility (MMF) in Pune plays a crucial role in manufacturing key aerospace components, supporting not only Indias defense and commercial sectors but also global aviation supply chains. Our relationships with Indian suppliers, combined with our world-class local facilities and global reach, continue to shape Indias aerospace ecosystem. Role Overview: Work closely with quality & production HPT teams and demonstrate accountability for the key business deliverables. Ensure that the Production line & products meet quality & compliance requirements. Coordinate with Quality & Line Leaders to discuss and resolve product quality issues. Physical inspection of production hardware per NAS 410 /Customer norms Assist in new product development activities to avoid quality issues. Work with leadership to improve quality management system based on audit results. Extend cross functional availability & support to internal quality teams Support operations across shifts in NDT / Quality functions. The ideal candidate: The ideal candidate is a quality-focused professional with strong experience in aerospace production and compliance, skilled in NAS 410 standards , Computed Radiography Testing and audit coordination. They excel in cross-functional collaboration, problem-solving, and ensuring high-quality production outcomes across shifts Required Qualifications: Diploma in engineering with 3-5 Years of Experience in aerospace / aviation Engineering industry is a must Working knowledge of Aerospace Prime requirements along with NADCAP. NAS 410 IN NDT Computed Radiography is must. Working knowledge of AS9100 & Aerospace Regulatory requirements Highest Levels of Personal Integrity and Safety Mindset. Preferred Qualifications: NAS 410 IN NDT Computed Radiography. Coordinate AS / NADCAP & other relevant audits. Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward. Additional Information Relocation Assistance Provided: No

ls responsible for the entire Quality Control department of the plant. Will lead a Quality Control team consisting of Assistant Managers, lnspectors, Engineers and Trainees. The Quality Control team will work parallel to the Quality Assurance team. Both teams report to GM - Quality. Shall study and validate adequacy of PCP, QAP, QAM and lnspection Plans received from Engineering department. Shall direct team to complete QC activities of FIRST ARTICLE and help modify the Engineering Documents where required to ensure quality compliant series production of products. ls responsible to study the customer requirements and ensure all internal documentation is aligned to customer requirements. Shall ensure QC activities of all running projects by assigning work to the team members as per the goals and schedules of the organisation and place effective measures to ensure QC activities are carried out with due diligence. Shall ensure all QC activities are done as per the GANTT CHART time lines and escalate delays to reporting authority during project weekly reviews o ls responsible for keeping all the QC infrastructure functional and calibrated. Also raise indents for any additional infrastructure required for new operations improve current operations for increased productivity Shall participate in the Cross Functional Team (CFT) for the following: o Risk Analysis of Contracts o Contract Review of PO o Analyse deviations in production and get a disposal from CFT Top Management Customer where required o Contribute technically during preparation of quotations to customers Shall liaise with customers and suppliers for completion and approval of FIRST ARTICLE and also subsequently ensure acceptance of every lot of series production goods. SKILLS AND EXPERTENCE: Should have worked in manufacturing of components and assemblies in Aerospace & Defence domain for at least 10 years of the total prior experience mandated in this document Should have working knowledge of QC of mechanical hardware components and assemblies. Products manufactured, will be from the below processes, hence the candidate must have high degree of expertise in at least one of the following with working knowledge or at least basic understanding in the others: o Metallic Machining (CNC & Conventional) o Precision Welding of exotic alloys o Metal Forming o Filament Winding (Composites) o Press Moulding o Autoclave Moulding Shall have knowledge and hands on experience in Dimension Measuring, NDT (including UT, RT, FPT & MPI), Functional testing and Mechanical Testing Preferred to have knowledge on Composites Testing, Chemical Analysis and Environmental Testing. Shall have ability to analyse the inspection reports to decide and record pass/fail grade of products. Strong Skill in reading of Engineering drawings 3D Models, Process specifications interpretation are required Working knowledge of Quality Assurance and metrology principles Should be well-versed in AS9100 processes and related standards for FAI etc. Experience in NADCAP is desirable. Must have experience with performing First Article lnspections internally and with customers Experience with CMM, height gauge and 3D portable arm is preferred Ability to use precision measuring instruments and carry out calibrations Monday to Saturday (WFO) 1st and 3rd Saturdays are off Timings : 9 am to 6 pm

Position: Quality Manager. (JSW/SAI Ref : Quality Engineer) Experience: 09 to 12Years Value Stream: Quality Assembly, Integration and Testing in UAV (Exp in LV, Missiles can also be considered) Educational Qualification: BE OR BTech - ECE / Electronics Job Description: Establishing Quality Data Pack, Quality Execution, Industrialization and drive Continual improvement related to Assembly, Integration and Testing. Job Responsibility: Development of Quality Data Pack related to Sub Assembly, Assembly, Integration and Product Testing. Experience as System Integration Quality is mandatory. Quality Control Execution of Assembly, Integration and Testing line. Various stage clearances and Certification of final product for flight operations Exp in clearance of Various Payloads, Onboard systems, Communication Systems, GHE, GSE including Engine Testing and Certification. Experience in manufacturing of PCB and Cable Harnessing and its Quality processes Effective work exposure in clearances of Airframes, Propulsion systems, Electromechanical Assemblies, LRUs, Verification and Validation prior to Integration Verification and Validation of Engine and Software testing including exposure GHE, GSE and Check-In and Check-out of Final system for flight. Experience in HILS/SILS will be an added advantage. Industrialization : Exposure to APQP, PPAP, FAI, PFMEA and Process Knowledge including working knowledge in NDT, DT and Special Processes Exposure to implementation of Statistical tools suitable for driving process improvement incl Lean and Six sigma practices Quality Execution of Incoming, In-process and Final Inspection related to UAV or Launch Vehicles Managing working manpower, Training and Qualification including Facility Augmentation (CAPEX) Drive product specific Continual improvement meeting business objectives Experience in Detail part and Bought out Quality will be added advantage Departmental Experience in AS9100, ERP System Management, NADCAP, ISMS, EHS, OHSAS, Digital Transformation is essential.

Position Title: QMS Manager / Management Representative (MR) Company Name: Senwell Exports Private Limited Industry: Aerospace / Precision Component Manufacturing Location: Kesnand, Wagholi, Pune Experience Required: 8 to 12 Years Job Description Senwell Exports Private Limited is looking for an experienced QMS Manager / Management Representative (MR) to lead and manage our Quality Management System (QMS) as per AS9100 and ISO standards. The ideal candidate will ensure compliance, continuous improvement, and maintain high-quality standards as per Aerospace Industry requirements. Responsibilities: Manage and maintain the Quality Management System (QMS) in compliance with AS9100, ISO 9001, and customer standards . Act as Management Representative (MR) for customer, third-party, and certification audits . Conduct internal audits, identify non-conformities, and drive corrective & preventive actions (CAPA). Handle customer complaints, root cause analysis (RCA), and implement preventive measures. Review and control QMS documentation: SOPs, Work Instructions, control plans, PFMEA, etc. Conduct training programs for employees on QMS and process improvements. Monitor and report QMS performance through KPIs and present findings to top management. Collaborate with cross-functional teams (production, purchase, design, and engineering) for process improvements. Supplier: Quality management and audits. Ensure adherence to EHS (Environment, Health & Safety) standards. Drive continual improvement initiatives to optimize processes and reduce waste. Key Requirements: Bachelors Degree/Diploma in Engineering (Mechanical/Production/Industrial preferred). 8–12 years of relevant experience in QMS/quality systems roles in aerospace/defense/precision component manufacturing . In-depth knowledge of AS9100, ISO 9001, ISO 14001, QMS tools, and compliance standards. Certified Lead Auditor/Internal Auditor for AS9100 & ISO 9001 (preferred). Hands-on experience with CAPA, RCA, FMEA, 8D, PPAP, APQP, SPC, and MSA. Excellent communication, documentation, reporting, and leadership skills. ERP, QMS software, and MS Office proficiency. Knowledge of CNC/VMC operations, GD&T, and NADCAP (preferred).

Position Title: QMS Manager / Management Representative (MR) Company Name: Senwell Exports Private Limited Industry: Aerospace / Precision Component Manufacturing Location: Kesnand, Wagholi, Pune Experience Required: 8 to 12 Years Job Description Senwell Exports Private Limited is looking for an experienced QMS Manager / Management Representative (MR) to lead and manage our Quality Management System (QMS) as per AS9100 and ISO standards. The ideal candidate will ensure compliance, continuous improvement, and maintain high-quality standards as per Aerospace Industry requirements. Responsibilities: Manage and maintain the Quality Management System (QMS) in compliance with AS9100, ISO 9001, and customer standards . Act as Management Representative (MR) for customer, third-party, and certification audits . Conduct internal audits, identify non-conformities, and drive corrective & preventive actions (CAPA). Handle customer complaints, root cause analysis (RCA), and implement preventive measures. Review and control QMS documentation: SOPs, Work Instructions, control plans, PFMEA, etc. Conduct training programs for employees on QMS and process improvements. Monitor and report QMS performance through KPIs and present findings to top management. Collaborate with cross-functional teams (production, purchase, design, and engineering) for process improvements. Supplier: Quality management and audits. Ensure adherence to EHS (Environment, Health & Safety) standards. Drive continual improvement initiatives to optimize processes and reduce waste. Key Requirements: Bachelors Degree/Diploma in Engineering (Mechanical/Production/Industrial preferred). 8–12 years of relevant experience in QMS/quality systems roles in aerospace/defense/precision component manufacturing . In-depth knowledge of AS9100, ISO 9001, ISO 14001, QMS tools, and compliance standards. Certified Lead Auditor/Internal Auditor for AS9100 & ISO 9001 (preferred). Hands-on experience with CAPA, RCA, FMEA, 8D, PPAP, APQP, SPC, and MSA. Excellent communication, documentation, reporting, and leadership skills. ERP, QMS software, and MS Office proficiency. Knowledge of CNC/VMC operations, GD&T, and NADCAP (preferred).

The Senior Engineer will lead the development and optimization of manufacturing processes for high-precision aerospace components. This role requires expertise in advanced manufacturing techniques, quality systems, and industry standards. The engineer will play a key role in ensuring product integrity, process efficiency, and compliance with aerospace regulations. Lead the development and optimization of manufacturing processes for high-precision aerospace components. Apply engineering methodologies including PFMEA , DFM , APQP , and PPAP to ensure process reliability and product quality. Collaborate with cross-functional teams including design, quality, and production to ensure manufacturability and compliance. Utilize advanced materials such as Titanium , Inconel , and composites in aerospace-grade applications. Ensure adherence to industry standards like AS9100 and NADCAP throughout the production lifecycle. Drive continuous improvement initiatives using Lean Manufacturing and Six Sigma techniques. Troubleshoot and resolve technical issues in machining and assembly processes. Mentor junior engineers and support technical training across the engineering team. Use C tools and apply GD&T principles for precision design and manufacturing. Report to the Engineering Manager and contribute to strategic engineering decisions and project execution.

Roles and Responsibilities Knowledge on anodizing, priming, surface treatment, bonding, SPD, Nadcap (National Aerospace Defense Contractors Association) composite manufacturing. Collaborate with cross-functional teams to ensure process compliance with industry standards and regulations. Develop and maintain documentation of all experimental results, including protocols, procedures, and reports. Provide technical support to production team on troubleshooting issues related to process deviations or defects.

Lead QA Dept handling GAUGE INSTRUMENTS QUALITY PLANNING, INSPECTION METHODS, RAW MATERIAL APPROVAL PROCESS, NCR CLOSURE, RJECTION ANALYSIS, CUSTOMER QA, CUSTOMER COMPLAINTS ANALYSIS, SUPPLIER PERFORMANCE MONITORING, QMS (ISO9001, AS9100 & ISO14001.. Required Candidate profile BE 15+yrs exp into QA 5+yrs exp with AEROSPACE UNIT must Strong in IPQC, SQA, CUSTOMER QA & QMS Strong exposure in FAI related activites, NADCAP, GD&T, CMM Call Prabhu @ 7010863499 AEROSPACE exp must Perks and benefits Excellent Perks. Send CV recruiter@adonisstaff.in

Position: Supplier Quality Engineer. (JSW/SAI Ref : Quality Engineer) Experience: 06 minimum years Value Stream: Quality Detail Parts – Metallic, Composites, & Standard Items Educational Qualification: BE - ME Job Description: Establishing Quality Data Pack, Quality Execution, Industrialization and drive Continual improvement related to Detail Part Manufacturing and Quality Clearances. Job Responsibility: Development of Quality Data Pack related to Material, BOI and Detail Parts including development of inspection plans/procedures/WI and methods suitable for mass production. Experience in CMM, Other 3D Measurement, Tooling validation and Gauging is mandatory Quality Control Execution of Materials, BOI and Detail parts and its stage clearances both at Supplier and Inhouse. Customer coordination for necessary clearances Industrialization: Work Experience in APQP, PPAP, FAI, PFMEA, CMM, including basic knowledge NDT, DT and Special Processes. NDT certification will be an added advantage. Cross Functional Work Experience to establish In process and Preventive process controls including NCR and Customer Feedback Management. Exposure to implementation of Statistical tools suitable for process improvement, Lean and Six sigma practices. Strong knowledge in RCA tools, CAPA expected. Managing working / TPI manpower, Training and Qualification Departmental Experience in AS9100, ERP System Management, NADCAP, ISMS, EHS, OHSAS is essential.

Roles and Responsibilities Calibration Principles Material Handling & Safety Awareness Measuring Equipment Handling MSA Calculations in Calibration Calibration Frequency Monitoring Traceability for Calibration (NABL) Calibration Terminologies (Resolution, Least Count, off Set, Accuracy, Uncertainty, Error.. 6s & ESD QMS Procedures Trained in QMS Standard Audit Principles Audit Procedures and Methods Core Tools Understanding of Customer Specific Requirements Communication Skills Problem Solving Technique NADCAP Skills Required Minimum 1 year of experience in EMS Knowledge in Quality system procedure and Calibration activity. Must have: Good communication. Good to have: Owner ship and Responsible in the assigned activity About Company: Avalon provides solutions in manufacturing from design, analysis to mass production . We provide our customers with integrated manufacturing facilities, skilled workforce, certified quality systems and a network of supplier partners to deliver quality products and services on time. The group today is a preferred supplier to worlds leading companies, viz., Alpha, Kyosan, Alstom, Robert Bosch, Continental, Tesla, Cummins etc. in the ESM and in aerospace business. The Avalon group is an INR 867 Crore revenue (FY 23 - 24) enterprise while ATPL along with other Indian group companies (ATS and Sienna ECAD). The group has a well-rounded professional team across USA & India with employee strength of 2000+ (in US & India). The group has an excellent track record of 20+ years with a thorough list of customers predominantly in US and growing list in India.

Job Description: Knowledge and experience on Special Processes such as Black Oxide, Passivation, Powder Coating, Phosphating process and NADCAP. Developed and implemented standard operating procedures (SOPs) for powder coating processes. Conducted regular quality control inspections to ensure compliance with industry standards and customer specifications. Ensure adherence to safety and quality standards. Perform quality audits and assessments to identify areas for improvement in fabrication processes. Develop and implement quality control plans for sheet metal products, including powder coating and black oxide applications. Collaborate with cross-functional teams to resolve quality issues and improve overall product reliability. Preferred candidate profile: Bachelor's degree in Engineering, Manufacturing or related field. Minimum of 5 years of experience in Powder Coating or a related industry. Proven leadership and supervisory experience. Strong understanding of powder coating processes and equipment. Excellent problem-solving and organizational skills.

Positions: Deputy Manager/Manager - Laboratory Experience: 10-15 Years in laboratory (Process Control) Qualification : BE in Chemical/BSc/MSc in Chemistry Overall Functional Scope: Responsible for Handling team and Administration activities of Laboratory. Responsible for sustenance and maintenance of the quality management systems AS9100, ISO 17025 NADCAP accreditation related to laboratory Responsible for process control of special processes such as such as tartaric acid anodizing, boric sulphuric acid anodizing, cadmium plating, zinc plating, passivation, chromic acid anodizing, painting, etc. Upkeep of the laboratory, 5S, record management, etc. Achieve business targets and continual improvement. Responsible for the training and competence of the chemists. Plan, organize and monitor to ensure smooth functioning of the laboratory. Hands on Experience in NABL Activities. Requirement: Hand on experience on the periodic bath analysis and tests for all the chemical processes such as tartaric acid anodizing, chromic acid anodizing, boric acid anodizing, cadmium plating, zinc plating, passivation, hard anodizing, chemical conversion coating, painting and shot peen. Hands on experience on the periodic qualifications -surface treatment, finishing operations and surface enhancement processes. Hands on experience on all the equipment used in testing and analysis in the laboratory. Hands on experience on ICP-OES. Optimize bath solution controls to achieve process capability and productivity. Efficient and effective bath make up / replenishment and top up frequency linked to productivity. Critical thinking, trouble shooting and problem solving of surface treatment process and decision making. Good specific technical skills, knowledge, and expertise to perform functions related to laboratory. Experience in quality management systems, Customer and statutory and regulatory requirements AS9100, ISO 17025, NADCAP, REACH, ROHS, Conflict Minerals, KSPCB, etc. Plan, procure and maintain laboratory inventories as per defined target levels. Review and approval of test reports, internal periodic qualifications in accordance with ISO/IEC 17025 Collaborate with the multifunctional team for establishing new process qualifications. Ability to train and certify Chemists on various tests conducted at the laboratory. Ability to conduct and validate proficiency testing, homogeneity tests, round robin tests, intermediate checks, and internal quality checks, etc. Capability to develop necessary procedures, work instructions in accordance with ISO 17025, Standards, and customer specification.