21 Mv Jobs

Liaising with Schneider offer team and customer's project teams, consultants and internal teams to understand the project requirement/scope/needs Ensure the solution compliance to the local standards, regulation, codes and safety requirements Coordinate with electrical and mechanical engineer to create all required document in terms of capacity calculations, design calculations, drawings, layouts, specifications, block schematics, solution value proposition, compliance table etc. Solution design should ensure the successful project implementation and customer satisfaction Provide engineering support to the team during installation in terms of process, tools required, procedures, regulatory compliance, Dos and Don'ts technical interpretations and support and ensure quality Project Execution Assist vendor qualification, provide first cut costing Participate in customer meetings to communicate the project status and any roadblocks Escalate any roadblocks to internal stakeholders. Provide regular reports on proposal status to Project Manager and Solution Manager Ensure the compliance to customer project processes, methodologies and procedures during the design phase Control schedule during the design phase to meet project master plan Customer care and quality Deliver services to achieve highest customer satisfaction during project execution Escalate any design issues to Project Manager and be responsible to ensure its closure Identify the improvements needed, document it and communicate to the respective owners and stake holder Partner Management Responsible for coordinate design finalization with third party service providers during project execution Monitor and communicate the performance of partners Qualifications Bachelor's Degree or equivalent (Electric Engineering or Mechanical Engineer) At least 5 years experience in the electrical or mechanical engineering industry, of which 2 year in designing complete systems for critical facilities such as data centers Good command of English Business understanding ounderstanding of electrical distribution system design ounderstanding of electrical system components such as HV, MV, LV distribution, swichgears, panel design standards, grounding , gernerator system, etc... ounderstanding of mechanical design (including cooling, piping, fire alarm ounderstanding on best practices and standards in electrical systems design, installation and operation requirement ounderstanding of engineering system documentation oproven skill in project engineering oability to meet deadlines and demonstrate effective time management skills oexcellent business ethics and integrity odemonstrates a flexibility in operational style to meet the requirements or multi-cultural position

Position: System Engineer II (BESS) Mandates BESS, Scada Experience 6+ Yrs CTC – As per industry standard Notice Period – Immediate to 90 days Location –Pune No. of Positions – 1 Shift – Normal Job purpose: Assist Lead Project Engineer & Engineering managers for the project engineering & delivery of projects. This will involve design, detailed engineering & Site installation and Commissioning as well as day to day project management requirements. Responsibilities: Core Activities Assist with development of project designs Work with Lead Project engineer to understand process & design needs, Development & management of engineering Designs/technical specifications Assist Lead engineer for project purchasing requirements Develop Functional and detailed specification for the projects Lithium Ion Phosphate Battery selection wrt following parameters:- C-Rate Sizing for Degradation Efficiency Calculation including Auxilary Consumption Battery Rack designing Certification compliance HVAC Sizing and Calculation alongwith HVAC ducting design PCS Invertor Selection wrt following parameters:- Voltage, Current and Generated power Battery Charging and Discharging Patterns Certification compliance AC and DC Circuit designing including the following parameters:- Breaker, Fuse, Combiner Box selection Ground Insulation monitoring scheme Electrical protection scheme designing for both AC and DC side of BESS Unit Controller Cabinet designing including the following parameters:- Unit Controller and IO selection Communication mode freeze with BMS, PCS, HVAC, FPS etc. Health Monitoring of the entire BESS Fire Protection and Suppression system design Container 20/40ft selection and designing for accommodating all BESS components including certification requirements BESS Use case designing including the following customs:- Peak Shaving Energy Shifting Micro Grid Black Start Volt/Var Compensation Diesel Fuel Saver Grid Forming Ramp Support Synchronizing and Load Sharing Demand Control Other project specific use cases as per applicability EMS Controller Cabinet designing including the following parameters:- EMS Controller and IO selection Communication with 3rd party PV SCADA, Wind Turbine Controller and Grid SCADA monitoring including the following:- Database building and integration of 3rd party IEDs over Industry standard protocols like IEC61850, DNP3, IEC870, Modbus etc. HMI Graphics development specifically for BESS, Solar, Wind monitoring Remote Cloud Data Reporting and Architecture Designing Engineering Documentation and Approvals Independently conduct FAT for Control system Ensures that required prerequisites (e.g. design inputs, tools, and documentation) are in place prior to commencing work. Ensures that the engineered solution meets project requirements in terms of functionality, standards, quality, and supporting documentation and implementation process at minimum cost for allocated work assignments. Shares technical knowledge with project team, supervisor, own discipline and other engineering disciplines Reports progress and technical problems to LPE / EM Pro-actively identifies potential quality and efficiency improvements within assigned work. Active participation in Organization initiatives such as Six Sigma, HOS. Actively participate in project pre-commissioning, commissioning and SAT for the assigned project. Platforms & Domain Experience Lithium-Ion Battery / PCS / HVAC / Fire Protection and Suppression System / Container RTU / PLC / SCADA System design & detailed Engineering 3rd Party Interface Design & Engineering including communication protocol IEC61850, DNP3, IEC870, Modbus etc. Site Supervision and Commissioning experience is must in high voltage, high risk environments Domain Knowledge – Electrical Domain Skillsets including Renewable Energy requirements Qualifications: BE (Electrical / Electronics / Electronics & Communication)Battery Energy Storage System Experience > 7 yrsShould be able to manage and guide Team Must have Skills: Understanding of Basics & Detailed engineering of electrical systems for HV/ MV/LV Systems + SLD Understanding for Electrical Systems and Switchgear components Engineering - Preparation of BOM, Heat Load/Current Load Calculations, IO assignment, GA dwg Microgrid controls including RE Use cases like peak shaving, capacity smoothing schemes etc FBD Programming in Electrical RTU - Substation Automation System OR Programming in PLC/RTU - IEC-61131-3 Familiarity with communication protocols such as IEC61850, DNP3, IEC870, ICCP, Modbus, OPC DA & UA, Profinet, EthernetIP SCADA Configuration & Database Role & responsibilities Preferred candidate profile

We are seeking to recruit an ambitious and dynamic Technical Lead - Intelligent Infrastructure to join the ‘UK iCRC - Intelligent Infrastructure Team to work alongside our UK discipline. We are looking for rounded individuals responsible for planning and managing the delivery of projects, including adequacy of design, compliance with standards and legislation, resource time, cost and quality. The position will report to the Head of the Discipline. Locations: Noida/ Bengaluru/Mumbai Minimum Experience: 15 years Job Description: People focus: The role has a key responsibility for ensuring the health, safety and welfare of staff. Technical Leader is expected to demonstrate effective & visible leadership across projects, focusing on the ongoing engagement and retention of employees through the development of individuals and building high performing teams technically. Business, operational & commercial management – delivering on business plan & budgetary targets. Commercial governance – project reviews; forecasting and resource management. Divisional Resource Management – iCRC utilisation. Technical governance of the Intelligent Infrastructure team output working with UK technical governance of all deliverables. Key point of contact with the UK business, direct liaison with UK leadership, and promoting the iCRC and ensuring its success. Line Manager – PDRs, promotion, training & mentoring. Staff/Team Development – support, training, nurturing; and. Representing the Intelligent Infrastructure business within the wider Indian Business. Responsibilities: Act as the ‘face’ of the India-based Intelligent Infrastructure team for technical delivery of UK II schemes. Local health and safety, welfare, risk, information security, and assessment/compliance. Promote WSP Vision and Values. Actively promote the UK iCRC culture within the team and ensure that the staff deliver on promises. Manage the team and processes to ensure the preparation and checking of documents, reports and other technical outputs/deliverables from a variety of Intelligent Infrastructure related annual works programmes, meet internal and client requirements and quality assurance standards. Mentoring team members towards professional, technical accreditation or equivalent. Carry out and report on staff appraisals and performance development reviews. Recruitment to achieve budgeted and programmed team growth. Monitor and review team capability in the use of the required standards, processes and software tools and, with technical colleagues, identify training required. Identify opportunities to upskill existing technical resources or recruit new capabilities to deliver additional services or enhance existing ones. Identify further skills that could be brought into the iCRC to deliver additional services or enhancements to various businesses. Ensuring that the Business Management System is implemented and maintained. Seek regular feedback on team performances, ensure criticisms are positively converted into opportunities for improvement. Contribute to the design of operational processes, systems, quality measurement processes and achievement of KPIs. Carry out audits of adherence to WSP Management and Quality processes and implement corrective measures where required. Client/External focus: Maintain strong integration with UK colleagues and contribute to the teams’ performance of client satisfaction. Contribute to knowledge sharing in internal and external forums and including technical input to your team. Remain up to date with market and competitor knowledge across the Intelligent Infrastructure business. People: Inclusively lead people, clearly articulating the vision, defining responsibilities, delegating effectively and providing constructive feedback. Inspire and motivate departmental staff towards technical progression. Be self-motivated to take on a leadership role in project work with a clear focus on timeliness, quality and technical excellence. Managing people through change and develop succession plans. Create and support innovation. Deal with conflict appropriately. Work across cultures (e.g. international and/or multi-disciplinary projects), embracing diverse points of view. Business Focus: Be responsible for the quality of technical outputs to WSP standards including any specific UK client standards. Identify appropriately qualified staff to deliver projects with regard to the constraints of project budgets. Explore ways to add value and improve personal and team performance. Ensure budget utilization is met or exceeded. Key Competencies: You should be able to demonstrate a proven working knowledge of the II sector in terms of UK design standards. Track record of senior technical experience in at least one II, Transport or equivalent discipline. Excellent communication, internal client handling, interpersonal skills and listening skills with the ability to influence and interact with people. Comfortable leading internal engineering discussions and the experience and ability to understand, Open-minded and intellectually agile. A hard-working self-starter with initiative and ability to work within a team environment. Understand own strengths and impact, adapting behavior according to different situations and individuals. Able to work effectively under pressure. Act ethically with fairness, honesty and integrity. You should have demonstrable experience of resource and project management. Experience of liaison with clients, co-professionals and design teams. Excellent written and verbal communication skills. Effective time management and strong organizational skills. Qualifications: Educated to Bachelor / Master’s degree level in a such as Electrical Engineering, Electronics Engineering, Civil Engineering, Transportation Engineering or equivalent. Chartered Engineer status of a recognized professional institution. (e.g. IET). Seasoned professional with at least 15 years’ experience in technical design delivery, project management, project delivery or in leadership in a consulting engineering environment.

We are looking for a Lead Electrical Engineer with strong background in integration experience of medium voltage, low voltage electrical equipment, including motors and VFDs, LV and MV switchgear in the Oil & Gas, Petrochemical, and/ or Energy Sector. Job position to be in India / need based travel to Middle East (UAE, QA, KSA etc.) with responsibilities covering engineering activities across EAD Middle East. Effective communication with the international team is a crucial aspect of your role, and your goal is to contribute to the execution of the projects that meets the needs of the SE industry. oriented: Evaluation and completion of complex and demanding customer specifications, customer questionnaires, deviations, compilation of proposal documents, and cost calculations. Coordinate EPC contract scope of supply. Ensure that project time schedules and landmarks are achieved, with respect to quality and costs for the allocated scope. Participation in engineering and optimization of interfaces. Closely collaborate with project managers, ensuring that potential project execution risks and opportunities are collected in a timely matter. Responsible for the design review process and documentation submission, and independent preparation relevant technical specifications and inquiry documentation. Leading the team responsible for design activities of electrical systems including MV and LV motors, MV VFDs, MV, LV and AC/DC-Switchgear, Batteries, Rectifiers, Inverters, DC-DC Converters, Diesel Generator, HV and LV transformers, generator circuit breaker, protection, grid interfaces etc. Act as technical authority with respect to MV and LV electrical equipment including variable frequency drives and electric motors with responsibilities for final equipment selection in project execution phase. Provide technical support to sales/ bid team in area of his expertise. Lead all aspects of technical alignment with customers and suppliers ensuring adequacy of selected equipment. Coordination activities with other teams (I&C, mechanical and civil). We dont need superheroes, just super minds: Bachelors degree in power electrical engineering as a minimum, masters degree in electrical engineering advantageous. Proven experience of at least 10 years within electrical design (low / medium / high voltage equipment and systems) including VFDs and Motors, GIS mainly in Oil & Gas industry with international companies. Detailed knowledge of products such as, MV and LV motors, MV VFDs, MV, LV and AC/DC-Switchgears, Batteries, Rectifiers, Inverters, DC-DC Converters, Diesel Generators, HV and LV transformers, generator circuit breakers, protection, grid interface etc. Knowledge of LV and MV Switchgear protections. High voltage protection knowledge will be advantageous. Knowledge on relay file preparation of different manufacturer such as Siemens, ABB, Schneider etc. will be advantageous. Design experience in EPC brownfield and greenfield projects. Experience in motor to motor" or turbine to motor" replacements as drivers for mechanical equipment (compressor, pump) will be considered as plus. Deep understanding of project business, including customer approach in typical Energy/Power, Oil & Gas / Petrochemical applications. Practical knowledge of software like Eplan, AutoCAD, ETAP will be added advantage. Adaptable, open minded and flexible approach to a dynamic environment. Excellent multitasking and organizational skills, and ability to ensure a high-quality work process. Basic understanding of other design subject areas such as I&C, Mechanical and Civil engineering to ensure alignment of project interfaces. Excellent spoken and written English language skills and willingness to travel regularly to Middle East (UAE, Saudi Arabia).

We are looking for an Electrical Engineer with strong background in integration experience grid analytics - transmission network planning with detailed substation models, network topology processing, transmission system analysis, in the Oil & Gas, Petrochemical, and/ or Energy Sector. Effective communication with the international team is a crucial aspect of your role, and your goal is to contribute to the execution of the projects that meets the needs of the SE industry. How You'll Make an Impact Part of a team for designing of electrical systems MV, LV and AC/DC-Switchgear, Batteries, Rectifiers, Inverters, DC-DC Converters etc. Excellent knowledge of specialized tools for grid analytics - transmission network planning with detailed substation models, network topology processing, transmission system analysis, electric SCADA and real-time transmission network energy management system (for example ETAP, PSS SYNCAL, DIGSILENT and/or similar softwares) Proposal engineering: evaluation and commenting of customer specification, customers questionnaire, deviations, compilation of proposal documents, cost calculations Evaluation of EPC contract (customer specification, etc.) Preparation of the time schedule for the electrical scope of works Supervision of deadlines, quality, and costs for the electrical scope of works Responsibility for the design review process Preparation of affiliated documents e.g. Single Line Diagram, Typical drawings, Various reports, Disposition of equipment using softwares for efficient engineering Preparation of technical specifications and inquiry documentation Participation in engineering and optimization of specific equipment Preparation of required documentation during bid phase, design phase, commissioning phase and service phase Review of contractors engineering Responsible to verify in detail BOQ and technical requirements from tender documentation Ensure Subcontractor responses are complete & tabulated accurately on a Bid Evaluation spreadsheet Proactively work with the technical preparation group to ensure commercial bid evaluations are completed in a timely manner We dont need superheroes, just super minds. Bachelors degree in electrical engineering as a minimum, masters degree in electrical engineering advantageous. Proven experience of at least 8-10 years within electrical design (low / medium / high voltage equipment and systems) including VFDs and Motors, GIS mainly in Oil & Gas industry with international companies. Detailed knowledge of products such as, MV and LV motors, MV VFDs, MV, LV and AC/DC-Switchgears, Batteries, Rectifiers, Inverters, DC-DC Converters, Diesel Generators, HV and LV transformers, generator circuit breakers, protection, grid interface etc. Knowledge of LV and MV Switchgear protections. High voltage protection knowledge will be advantageous.

We are Hiring for below skills if you found suitable please apply in below link https://forms.office.com/r/M8y4c8sBM3?origin=lprLink Exp-1 to 3 years NP-0 to 30 days Below JD: BE/BTech in Electrical Engineering 1-3 years of exposure to electrical design for LV/MV Switchgear Understanding of protection relays, P&C schemes, control schematics, communication network architectures Understanding of breaker control schematics, panel arrangement drawings (layout drawings), three-line drawings, wiring diagrams and nameplate schedule Understanding of electrical protection systems, protection relays Understanding of communication systems from wiring requirements perspective for controls and automation (RS485, RS232, IRIG-B, Star/ring/daisy chain topology etc.) Familiar with IEEE-ANSI/NEC/UL/NEMA standards for MV Switchgear Ability to multitask and prioritize work. Knowledge on Electrical CAD tools: Electrical ACAD, E-BASE, MS VISIO would be an advantage

We are seeking an experienced Senior Electrical Engineer to lead the design, calculations, and execution of electrical engineering projects in the Oil & Gas sector. The ideal candidate should have expertise in onshore projects (offshore experience is a plus) and strong knowledge of electrical system design, load calculations, substation engineering, and cable routing . Key Responsibilities: Develop and manage Electrical Load Lists for HV, MV, and LV systems. Prepare and maintain Electrical Equipment Lists across different voltage levels. Perform Cable Sizing Calculations and prepare Cable Schedules . Design and calculate transformer specifications for switchyard applications. Create substation and switchyard drawings & calculations . Develop Single Line Diagrams (SLDs) for HV, MV, and LV systems. Conduct Lighting Calculations using Dialux software and design lighting layouts. Prepare earthing system calculations and grounding layouts . Develop Hazardous Area Classification Layouts following industry standards. Design cable routing layouts and optimize cable management strategies. Conduct ETAP studies , including: Load Flow Analysis Short Circuit Study Relay Coordination Study Motor Starting Current Analysis Review 3D Navisworks (Navis) files and provide technical feedback on electrical layouts. Required Skills & Qualifications: Educational Qualification: B.Tech/B.E/M.Tech in Electrical Engineering. Experience: 6-10 years, preferably in the Oil & Gas industry . Industry Exposure: Onshore experience is mandatory. Offshore experience is desirable. Technical Expertise in: T&D (Transmission & Distribution) system design. Electrical Load & Equipment List preparation. Cable Sizing, Scheduling, and Routing. Transformers, Switchgear, and Substation Engineering. Dialux (Lighting Calculations) & ETAP (Electrical Studies). Navisworks for 3D model review and comments. Hazardous Area Classification & Safety Standards. Soft Skills: Strong analytical and problem-solving abilities. Effective communication and collaboration skills. Ability to work on multiple projects and meet deadlines.

JOB DESCRIPTION Design experience in HV, MV and LV system design, Cable sizing, Earthing calculation, Lighting calculation and layouts, Oil and gas Domain preferred, Preparation of Electrical Deliverables independently, Client and Vendor co-ordination, Expertise in existing plant modification jobs as well as green field projects. Data / Input collection for projects. Able to generate design document for multiple projects. Exposure to HT and LT system design. Single line diagrams and Load list preparation. Electrical equipment specification preparation. Electrical layout preparation. Lighting design on DiaLux and layouts. Earthing and Lightning system design. Technical bid analysis / Tender preparation and evaluation. BOQ/BOM preparation. Knowledge of Hazardous area requirements, Heat tracing system design etc. Knowledge of ELV systems. Onsite - offshore team coordination EXPERTISE AND QUALIFICATIONS Electrical Load list, Single line diagram, Cable sizing, Cable schedule, Lighting Calculation, Lighting layout, Cable route layout, Earthing calculation, earthing layout, BOQ, Specifications. Datasheet, TBE, TQ, Vendor offer review

We are specifically looking for candidates with direct experience in Transformers or Switchgear, with a minimum of five years in the field. Preferred candidates should come from companies such as: ABB, Siemens, Schneider Electric, AVEVA, ETAP, PLANON, Rockwell Automation, Honeywell, Johnson Controls, GE, Hitachi, El Sewedy Electric, and Alfanar. Design Engineer Electrical & Instrumentation (Power Control Room) Location : Chennai India Level : Design Engineer Experience : 5 yrs Job Description: Technical activities related to Electrical Design, Engineering of HV/MV/LV PCR (Power control Room/Substation/E-House) by using various software, including but not limited to the following: To yield a safe, quality & cost-effective design/product in a timely manner as per clients requirements. To study and comply with required standards & specifications, etc. To perform and prepare HV/MV/LV Substation Electrical & Instrumentation design calculations including Lighting, Grounding, Shielding, Battery & Battery charger sizing. Station service transformer sizing & relevant drawings/documents. Prepare Electrical layout drawings (General Equipment Arrangement, lighting, shielding, cable routing, etc.) Perform interfacing, design review and validation of PSA, DCS, Fire Alarm, Communication, Data and Telephone System. Prepare Bill of Material, Documents and Drawings, etc. Select and evaluate related to Material & Components, e.g. lighting fixtures, Panel boards, HV/MV/LV cables, MCTs, grounding busbars, shielding mast, surge arrest, etc. Perform technical evaluation for the quotations of electrical equipment / materials and placing the purchase orders. Provide technical support and product cost sheets to the Sales Engineer. Work Experience: Direct work experience of minimum 5 years in the field of Electrical & Instrumentation Design/Engineering of HV/MV/LV Substation for the utility or Oil & Gas Industry (e.g. National Grid / Saudi Electricity Company, Saudi Aramco, Sabic, Royal Commission similar, etc.) Power System Protection & Control by using various Design/Engineering Software, i-eDilux, ETAP, Multigrid etc. and AutoCAD / MicroStation, etc. Required Skillset: Technical knowledge / expertise related to Electrical Design/Engineering of HV/MV/LV Substations, Strong skills in Design application software & AutoCAD / MicroStation, Proficient in English language. Strong knowledge of requirements of various equipment / systems in the Substation, like HVAC, Fire Alarm, Fire Fighting, etc.; and good knowledge of International Technical Standards (ANSI/IEC/UU/ASTM/NEMA/DIN/NFPA/SASO, etc.) Conversant with ISO/QMS/EMS functions and documentation. Education: BS/BE/BTech Electrical / Electronics / Instrumentation / Communications / Mechatronics Engineering

We are specifically looking for candidates with direct experience in Transformers or Switchgear, with a minimum of five years in the field. Preferred candidates should come from companies such as: ABB, Siemens, Schneider Electric, AVEVA, ETAP, PLANON, Rockwell Automation, Honeywell, Johnson Controls, GE, Hitachi, El Sewedy Electric, and Alfanar. Quantity : 1 position ( IMMEDIATE JOINER) Location : Chennai India Level : Design Engineer Experience : 5 yrs Job Description: Do the drafting work of jobs related to HV/MV/LV Switchgear. Edits, prints, logs and keeps the proper revision of all Engineering drawings under the instruction of the Design Engineer. Use CAD and Drafting Systems to prepare drawings. Develop detailed drawings and assist in the preparation of customer submissions and production files. Work Experience: Minimum 5 years working experience in Electrical Drawings drafting work. Required Skillset: Very good CAD user. Knowledge in Electrical Design drawings of Switchgear, Knowledge about electrical enclosures fabrication for mechanical draftsman or equivalent demonstrated industry experience in Switchgear Industry. Awareness of QMS, EMS policies and standards ISO 9001:2015 and ISO 14001:2015. Awareness of Safety and Procedures. Education: BS/BE/BTech/Diploma in Electrical Engineering

We are specifically looking for candidates with direct experience in Transformers or Switchgear, with a minimum of five years in the field. Preferred candidates should come from companies such as: ABB, Siemens, Schneider Electric, AVEVA, ETAP, PLANON, Rockwell Automation, Honeywell, Johnson Controls, GE, Hitachi, El Sewedy Electric, and Alfanar. Mechanical Design Engineer (Medium Voltage Switchgear) Quantity : 1 position ( IMMEDIATE JOINER) Location : Chennai India Level : Design Engineer Experience : 5 yrs Job Description: Do the drafting work of jobs related to HV/MV/LV Switchgear. Edits, prints, logs and keeps the proper revision of all Engineering drawings under the instruction of the Design Engineer. Use CAD and Drafting Systems to prepare drawings. Develop detailed drawings and assist in the preparation of customer submissions and production files. Work Experience: Minimum 5 years working experience in Electrical Drawings drafting work. Required Skillset: Very good CAD user. Knowledge in Electrical Design drawings of Switchgear, Knowledge about electrical enclosures fabrication for mechanical draftsman or equivalent demonstrated industry experience in Switchgear Industry. Awareness of QMS, EMS policies and standards ISO 9001:2015 and ISO 14001:2015. Awareness of Safety and Procedures. Education: BS/BE/BTech/Diploma in Electrical Engineering

Job Description Position Name Sales Manager Qualification B Tech Skill Set Excellent Communication Skills , Pleasing Personality, Knowledge of the industry Experience 10-15 years Salary Range As per the Market Location Chennai / Ahmedabad /Mumbai Work Requirements I. Responsible for Sales to expand customer base and extends the company's reach to existing and potential customers II. Meet with potential clients and grow long-lasting relationships III. Make strategy for order booking for complete LV , MVProduct IV. Coordinate with internal design team to ensure timely submission & approval of drawings V. Coordinate with OMG for timely and satisfactory experience during customer inspections VI. Ensure post Sales Customer Support & coordination with Customer Care team Generate new client & business relationships to ensure new business & projects are identified. VII. Achieve Customer Satisfaction at every stage of customer experience from Offer Submission to Commissioning VIII. Nurture CML customers for increased market share in their business Yearly/Monthly Capex & OPEX Budget IX. Achieve Customer Satisfaction at every stage of customer experience from Offer Submission to Commissioning X. Achieve Debtor Days Payment collection & Gross Margin targets XI. Nurture CML customers for increased market share in their business XII. Team Development - Technical Skills & Soft Skills XIII. Keeping and presentaing updated Management Reports to concerned officials.

Position Name: Assistant Manager Company Name Tricolite electrical industries Ltd Qualification: Diploma/B.Tech in Electrical Engineering Experience: Up to 10 years, working experience in LV and MV, Panel Industry Location: Noida Salary Range: 7.5 to 8 LPA Key Responsibilities 1. Costing Arranging technical clarifications from customers for tendering queries. Coordination with the Tendering Team for timely and techno-commercially correct offer submission. Offer optimization before negotiation. 2. Approach & Negotiation Accompany STL for techno-commercial negotiations wherever possible. Coordinate with customers for their techno-commercial compliances wherever required or advised by STL. 3. Sales Order Files Filling & compiling Design input, Negotiation Sheet, Tender Document, and FOS with final costing and all ISO-related documents. Coordination with OMG for SO creation. 4. Advance Payment Coordinate for receipt of advance payment from the customer as per PO terms. 5. Drawing Approval Coordination with the Design team for on-time drawing submission incorporating all negotiated design inputs. Ensuring timely drawing approval. Ensuring timely release of drawings for planning, procurement, and manufacturing. 6. Customer Inspection Coordinate with OMG & manufacturing for customer inspections. Attend all consultant & customer inspections in the absence of STL. 7. Bank Guarantee Obtain Bank Guarantee format from the customer. Get the format approved by the finance department. Coordinate with finance for timely submission of BG. Retrieval of expired BGs from customers and handing them over to finance. 8. Commercial Ensure collection of all commercial documents & compliances as per finance department inputs. Ensure submission of all necessary documents to the client for payment release as per PO terms. Track and follow up on payments. 9. Erection, Testing & Commissioning (ETC) Coordinate with clients for the expected schedule of ETC. Ensure the customer care team meets client requirements. Coordinate with Customer Care for commissioning & final handover report along with feedback for records. 10. SAP Updation Update all ECL & sales data in SAP for monthly reports.

Bachelors degree in Mechanical Engineering (or equivalent). 5+ years of experience in a complex 'made-to-order' manufacturing environment. 5+ years of experience in the design and development of ANSI LV/MV products . Proven experience in project leadership and team coordination. Proficient in UGNX/NX or similar 3D CAD modeling software. Strong understanding of ANSI/IEEE standards related to LV/MV Switchgears/MCCs. Excellent communication and problem-solving skills. Ability to work in a fast-paced and collaborative environment.

About Persistent We are a trusted Digital Engineering and Enterprise Modernization partner, combining deep technical expertise and industry experience to help our clients anticipate what’s next. Our offerings and proven solutions create a unique competitive advantage for our clients by giving them the power to see beyond and rise above. We work with many industry-leading organizations across the world including 12 of the 30 most innovative US companies, 80% of the largest banks in the US and India, and numerous innovators across the healthcare ecosystem. Our growth trajectory continues, as we reported $1,231M annual revenue (16% Y-o-Y). Along with our growth, we’ve onboarded over 4900 new employees in the past year, bringing our total employee count to over 23,500+ people located in 19 countries across the globe. Persistent Ltd. is dedicated to fostering diversity and inclusion in the workplace. We invite applications from all qualified individuals, including those with disabilities, and regardless of gender or gender preference. We welcome diverse candidates from all backgrounds. For more details please login to www.persistent.com About The Position We are looking for an experienced AngularJS Developer to join our dynamic team. You will be responsible for creating a top-level coding-base using Angular best practices. Your role will require you to implement an exciting and streamlined user experience in the form of a Java-based desktop and mobile web-app. To ensure success as an AngularJS Developer, you should have extensive knowledge of theoretical software engineering, be proficient in JavaScript, HTML, and CSS, and have excellent project management skills. Ultimately, as a top-class AngularJS Developer, you should be able to design and build a streamlined application to company specifications that perfectly meet the needs of the user. What You?ll Do Designing and developing user interfaces using AngularJS best practices Adapt interface for modern internet applications using the latest front-end technologies Write JavaScript, CSS, and HTML Develop product analysis tasks Make complex technical and design decisions for AngularJS projects Develop application codes and unit tests in AngularJS, Java technologies, and Rest web services Conducting performance tests Consulting with the design team Ensuring high performance of applications and providing support Expertise You?ll Bring Bachelor?s degree in Computer Science, Computer Engineering or similar Proficient in CSS, HTML, and writing cross-browser compatible code Experience : Previous working as an AngularJS developer. JavaScript building tools like Gulp or Grunt. Implementing front-end and back-end JavaScript applications Knowledge of JavaScript MV-VM / MVC frameworks including AngluarJS. Project management Communication Critical thinking and problem-solving Benefits Competitive salary and benefits package Culture focused on talent development with quarterly promotion cycles and company-sponsored higher education and certifications Opportunity to work with cutting-edge technologies Employee engagement initiatives such as project parties, flexible work hours, and Long Service awards Annual health check-ups Insurance coverage : group term life , personal accident, and Mediclaim hospitalization for self, spouse, two children, and parents . Inclusive Environment •We offer hybrid work options and flexible working hours to accommodate various needs and preferences. •Our office is equipped with accessible facilities, including adjustable workstations, ergonomic chairs, and assistive technologies to support employees with physical disabilities. Let's unleash your full potential. See Beyond, Rise Above

About Persistent We are a trusted Digital Engineering and Enterprise Modernization partner, combining deep technical expertise and industry experience to help our clients anticipate what’s next. Our offerings and proven solutions create a unique competitive advantage for our clients by giving them the power to see beyond and rise above. We work with many industry-leading organizations across the world including 12 of the 30 most innovative US companies, 80% of the largest banks in the US and India, and numerous innovators across the healthcare ecosystem. Our growth trajectory continues, as we reported $1,231M annual revenue (16% Y-o-Y). Along with our growth, we’ve onboarded over 4900 new employees in the past year, bringing our total employee count to over 23,500+ people located in 19 countries across the globe. Persistent Ltd. is dedicated to fostering diversity and inclusion in the workplace. We invite applications from all qualified individuals, including those with disabilities, and regardless of gender or gender preference. We welcome diverse candidates from all backgrounds. For more details please login to www.persistent.com About The Position We are looking for an experienced AngularJS Developer to join our dynamic team. You will be responsible for creating a top-level coding-base using Angular best practices. Your role will require you to implement an exciting and streamlined user experience in the form of a Java-based desktop and mobile web-app. To ensure success as an AngularJS Developer, you should have extensive knowledge of theoretical software engineering, be proficient in JavaScript, HTML, and CSS, and have excellent project management skills. Ultimately, as a top-class AngularJS Developer, you should be able to design and build a streamlined application to company specifications that perfectly meet the needs of the user. What You?ll Do Designing and developing user interfaces using AngularJS best practices Adapt interface for modern internet applications using the latest front-end technologies Write JavaScript, CSS, and HTML Develop product analysis tasks Make complex technical and design decisions for AngularJS projects Develop application codes and unit tests in AngularJS, Java technologies, and Rest web services Conducting performance tests Consulting with the design team Ensuring high performance of applications and providing support Expertise You?ll Bring Bachelor?s degree in Computer Science, Computer Engineering or similar Proficient in CSS, HTML, and writing cross-browser compatible code Experience : Previous working as an AngularJS developer. JavaScript building tools like Gulp or Grunt. Implementing front-end and back-end JavaScript applications Knowledge of JavaScript MV-VM / MVC frameworks including AngluarJS. Project management Communication Critical thinking and problem-solving Benefits Competitive salary and benefits package Culture focused on talent development with quarterly promotion cycles and company-sponsored higher education and certifications Opportunity to work with cutting-edge technologies Employee engagement initiatives such as project parties, flexible work hours, and Long Service awards Annual health check-ups Insurance coverage : group term life , personal accident, and Mediclaim hospitalization for self, spouse, two children, and parents Inclusive Environment •We offer hybrid work options and flexible working hours to accommodate various needs and preferences. •Our office is equipped with accessible facilities, including adjustable workstations, ergonomic chairs, and assistive technologies to support employees with physical disabilities. Let's unleash your full potential. See Beyond, Rise Above

About Persistent We are a trusted Digital Engineering and Enterprise Modernization partner, combining deep technical expertise and industry experience to help our clients anticipate what’s next. Our offerings and proven solutions create a unique competitive advantage for our clients by giving them the power to see beyond and rise above. We work with many industry-leading organizations across the world including 12 of the 30 most innovative US companies, 80% of the largest banks in the US and India, and numerous innovators across the healthcare ecosystem. Our growth trajectory continues, as we reported $1,231M annual revenue (16% Y-o-Y). Along with our growth, we’ve onboarded over 4900 new employees in the past year, bringing our total employee count to over 23,500+ people located in 19 countries across the globe. Persistent Ltd. is dedicated to fostering diversity and inclusion in the workplace. We invite applications from all qualified individuals, including those with disabilities, and regardless of gender or gender preference. We welcome diverse candidates from all backgrounds. For more details please login to www.persistent.com About The Position We are looking for an experienced AngularJS Developer to join our dynamic team. You will be responsible for creating a top-level coding-base using Angular best practices. Your role will require you to implement an exciting and streamlined user experience in the form of a Java-based desktop and mobile web-app. To ensure success as an AngularJS Developer, you should have extensive knowledge of theoretical software engineering, be proficient in JavaScript, HTML, and CSS, and have excellent project management skills. Ultimately, as a top-class AngularJS Developer, you should be able to design and build a streamlined application to company specifications that perfectly meet the needs of the user. What You?ll Do Designing and developing user interfaces using AngularJS best practices Adapt interface for modern internet applications using the latest front-end technologies Write JavaScript, CSS, and HTML Develop product analysis tasks Make complex technical and design decisions for AngularJS projects Develop application codes and unit tests in AngularJS, Java technologies, and Rest web services Conducting performance tests Consulting with the design team Ensuring high performance of applications and providing support Expertise You?ll Bring Bachelor?s degree in Computer Science, Computer Engineering or similar Proficient in CSS, HTML, and writing cross-browser compatible code Experience : Previous working as an AngularJS developer. JavaScript building tools like Gulp or Grunt. Implementing front-end and back-end JavaScript applications Knowledge of JavaScript MV-VM / MVC frameworks including AngluarJS. Project management Communication Critical thinking and problem-solving Benefits Competitive salary and benefits package Culture focused on talent development with quarterly promotion cycles and company-sponsored higher education and certifications Opportunity to work with cutting-edge technologies Employee engagement initiatives such as project parties, flexible work hours, and Long Service awards Annual health check-ups Insurance coverage : group term life , personal accident, and Mediclaim hospitalization for self, spouse, two children, and parents Inclusive Environment •We offer hybrid work options and flexible working hours to accommodate various needs and preferences. •Our office is equipped with accessible facilities, including adjustable workstations, ergonomic chairs, and assistive technologies to support employees with physical disabilities. Let's unleash your full potential. See Beyond, Rise Above.

Role & responsibilities Identify and generate new business opportunities through market research and networking. Build and maintain strong client relationships to ensure long-term business growth. Pitch products/services to potential clients and negotiate deals. Work closely with internal teams to ensure smooth execution of client requirements. Prepare and deliver sales presentations, reports, and proposals. Achieve assigned sales targets and contribute to the company's growth. Develop and implement marketing strategies to increase brand visibility and market share. Plan and execute campaigns across digital and traditional marketing channels. Conduct market research to understand customer preferences and trends. Preferred candidate profile Any Graduate Fresher's who are inclined to make career in Business Development role may apply. Strong communication and negotiation skills. Ability to identify new business opportunities and market trends. Proactive, goal-oriented, and self-motivated. Basic knowledge of CRM tools and MS Office. The candidate should have strong communication skills with a professional and presentable attitude Job Location: Powai, Andheri (East) . *Candidates will have to travel to Bhiwandi manufacturing plant as required* Perks and benefits Incentives and other Benefits If you are passionate about sales and business growth, we encourage you to apply and be part of our team! Email : ashishb@technocrafts.net, contact no/WhatsApp no: 9820719199. Technocrafts HR Team !

Job Summary: Electrical Engineer experience on basic and detailed design and project co-ordination of Electrical works on Power projects, preferably Combined Cycle. Should have executed at least two, medium to large size EPC projects, as Electrical Lead / Engineering Group Supervisor in an engineering office or consultancy of repute. Has a good knowledge of Electrical System and Physical design, the principles, and practices of related technical areas and of coordinating with other technical disciplines. Candidate should have exposure to Indian, US, UK/Euro and other foreign codes/standards and local practices. Major Responsibilities: Prepares or assists in preparation of conceptual studies, designs, reports or proposals, design criteria, specifications, budget and schedules for projects of varying complexity. Assist and provide guidance to engineers to perform conceptual design, System study and Equipment sizing, protection study, single line diagram, Metering and protection diagram, Cablesizing, earthing calculations, protection coordination study. Assist and provide guidance to engineers/designer to perform detail design, substation layout, main cable route, A/G tray and underground layouts, lighting, earthing, cable schedule etc. Assist and provide guidance to engineers for MR/SR preparation, bid analysis and make recommendations. Reviews and checks work of subordinate engineers and provide input for their performance evaluation. Supports the creation of a work environment that fosters openness, trust, communication, teamwork, empowerment, innovation, and satisfaction. Education and Experience Requirements: A recognized bachelors/masters degree in electrical engineering, from an accredited college or university with an overall experience of minimum 20 years. Site experience will be an added advantage Required Knowledge and Skills: Possess a broad understanding of the major design engineering deliverables. Plans, schedules, conducts, and coordinates detailed phases of engineering work in a project or staff group. Having sound knowledge of Generator, IPBD, GCB, HV, MV and LV switchgear electrical equipment, MV/LV motors, Transformers, SCADA etc. Shall have good knowledge of power system study using ETAP, protection study, metering and protection diagram. Coordinates engineering effort in assigned areas between specialty and other engineering groups or disciplines, with the client, suppliers, and contractors and between other groups. Understanding of engineering planning and control methods including computerized methods. Understanding of the roles played by other departments on projects including basic construction practices and the economics involved. Understanding of industry or regulatory codes and standards and design criteria pertinent to the engineering discipline. Skill in oral and written communication and writing technical reports.

Total Experience- 3 to 5 Years Location- Mumbai, Mysuru Qualification- BE Electrical Description- Bachelors Deg. In Electrical Engineering Ability to interpret and draft breaker control schematics, panel arrangement drawings (layout drawings), three-line drawings, wiring diagrams and nameplate schedule in MicroStation software Understanding of MV Switchgear product design. Understanding of electrical systems, schematics, wiring Familiar with IEEE-ANSI/NEC/UL/NEMA standards Understanding of MV Switchgear product design (Advantage)

Total Experience- 5 to 10 Years Location- Mumbai, Mysuru Qualification- BE Electrical Description- Experience in electrical design for MV Switchgear Experience with Siemens Switchgear a bonus Ability to analyze technical specifications and apply appropriate product solutions to meet customer expectations efficiently and timely Prepare technical RFQ packages (SLD, General Arrangement, standard schematics, EBOM) Expert level proficiency of protection relays, P&C schemes, control schematics, communication network architectures Familiarity with IEEE, ANSI, UL, and NEMA standards for MV Switchgear Ability to multitask and prioritize work. Advanced degree in Electrical Engineering