163 Mto Jobs - Page 4

Produce estimates based on collected contractual data, financial requirements & the scope of work. Analyze specifications, including scope documents. Reading engineering drawings. BOQ preparation MTO Quantity Surveying/estimation Required Candidate profile Exp in Quantity surveying/estimation Exposure in reading eng drawing Min 1.5 yrs of core exp.in the same from Chemical/Oil & Gas/Petrochemical/Infrastructure projects in Commercial complex Category

Planning, Organising and directing the Electrical Departments activities. Preparation of Electrical design criteria / Design basis. Development & Review of system design, single line diagrams and control schematics Electrical network/ load calculation, equipment sizing, load list, motor list cable sizing etc. Specification and datasheet of electrical equipment. Substation/MCC room layout, tower layout, cable raceway, cable routing/ layout, cable schedule, terminations. Lighting and earthing calculations, illumination layout, Earthing and lightning protection layout. Electrical installation specification and BOM/ MTO preparation. Area Classification drawing Electrical network calculation/ analysis using ETAP Software. Review of 3D Models. Vendor drawing/ document review and approval. Insuring adequate resources are available to satisfy project work. Active participation in erection assistance and plant commissioning.URH

Role Summary: We are looking for a Senior Instrumentation Design Engineer to lead and execute instrumentation engineering activities for EPC and engineering consultancy projects. The ideal candidate will have extensive experience in designing instrumentation systems, preparing detailed engineering deliverables, and coordinating with cross-disciplinary teams. Key Responsibilities: Develop and review Instrumentation Design Basis, I/O list, Instrument Index, Cable Schedules, and Loop Diagrams. Prepare specifications and datasheets for field instruments, control valves, and packages. Design and layout instrumentation and control systems (including hook-up drawings, JB schedules, layouts, etc.). Conduct vendor technical bid evaluations and support procurement activities. Review vendor documents and coordinate with vendors for technical alignment. Work closely with other disciplines (Piping, Electrical, Process) to ensure design consistency. Ensure compliance with international codes and standards Provide support during construction, commissioning, and FAT/SAT stages. Lead a team of junior engineers and drafters, providing guidance and quality checks. Qualifications: Bachelors Degree in Instrumentation / Electronics / Control Engineering. 8+ years of relevant experience in instrumentation design for EPC or consultancy projects. Proficiency in tools like SPI (INtools), AutoCAD, Navisworks, etc. Strong understanding of hazardous area classification, loop checking, and control system integration. Desired Skills: Strong analytical and problem-solving abilities. Excellent communication and team coordination skills. Ability to manage multiple projects and prioritize tasks effectively.

Career Area: Engineering : Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you'rejoining a global team who cares not just about the work we do but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don'tjust talk about progress and innovation here we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Role Definition Engineering support for Large Power Systems Products (Reciprocating Engines & Gensets) Manufacturing to ensure effective Built in Quality and technical issue resolution Responsibilities Engineering support for operations team during introduction and regular production of engines and gensets, support resolve issues from shop floor with high velocity Built in Quality engineering issue resolution and communication, document and review all issues with appropriate issue owners, working with cross functional team to implement design fixes/changes, Work with design control and platform team to resolve / approve any required deviations and PCNs working closely with other engine / genset design team members and other component teams, as well as validation engineers to determine component and pack configuration, design, detailing and problem resolution Participate in the design processes in a manner to ensure products provide superior performance, durability, quality, and serviceability Assisting supply specialists and buyers with supplier development and supplier performance. Overseeing the efforts of drafting and testing specialists. Participating in and supporting proposal preparation, cost estimates, and technical reports Understanding and adhering to project schedule Support CQMS, ISO 9001 and ISO 14001 documentation and audits, support and work in non-normal business hours as needed to work with global team Requires a degree in an accredited Mechanical / Electrical Engineering degree or equivalent, experience working in Power Systems (Reciprocating Engines / Genset) Product Development / Factory Support Requires Proficiency with ProE, TeamCenter, and other design / BOM management tools, knowledge of New Product Introduction and Current product issue resolution processes Requires Proficient communication skills Degree RequirementDegree requiredSkill DescriptorsAnalytical ThinkingKnowledge of techniques and tools that promote effective analysis; ability to determine the root cause of organizational problems and create alternative solutions that resolve these problems.Level Working KnowledgeApproaches a situation or problem by defining the problem or issue and determining its significance. Makes a systematic comparison of two or more alternative solutions. Uses flow charts, Pareto charts, fish diagrams, etc. to disclose meaningful data patterns. Identifies the major forces, events and people impacting and impacted by the situation at hand. Uses logic and intuition to make inferences about the meaning of the data and arrive at conclusions.Effective CommunicationsUnderstanding of effective communication concepts, tools and techniques; ability to effectively transmit, receive, and accurately interpret ideas, information, and needs through the application of appropriate communication behaviors.Level Working KnowledgeDelivers helpful feedback that focuses on behaviors without offending the recipient. Listens to feedback without defensiveness and uses it for own communication effectiveness. Makes oral presentations and writes reports needed for own work. Avoids technical jargon when inappropriate. Looks for and considers non-verbal cues from individuals and groups.Managing Multiple PrioritiesKnowledge of effective self-management practices; ability to manage multiple concurrent objectives, projects, groups, or activities, making effective judgments as to prioritizing and time allocation.Level Working KnowledgeRecognizes changing demands and priorities; validates changes with management. Obtains information about how current assignments contribute to organizational goals. Completes current work according to assigned priorities. Responds to day-to-day operational priorities while still making progress on project work. Performs at least 2-3 concurrent activities without reducing productivity.Technical ExcellenceKnowledge of a given technology and various application methods; ability to develop and provide solutions to significant technical challenges.Level Working KnowledgeProvides effective technical solutions to routine functional challenges via sound technical competence, effectively examining implications of events and issues. Effectively performs the technical job aspects, continuously building knowledge and keeping up-to-date on technical and procedural job components. Applies technical operating and project standards based on achieving excellence in delivered products, technologies and services. Applies current procedures and technologies to help resolve technical issues in one's general area of technical competence. Helps others solve technical or procedural problems or issues.Computer-Aided Design & EngineeringKnowledge of tools and techniques of specialized graphics programs; ability to produce, analyze, simulate and test product design drafts.Level Working KnowledgeGenerates specifications for parts or components with CAD software. Reuses design components via reusable libraries following standard procedures. Uses CAD to perform basic drafting such as wire frames, solid objects and array of objects. Performs routine changes to computerized schematics or drawings. Creates views of objects in 2 and 3 dimensions; creates perspective drawings and orthogonal views.Product Design - MFGKnowledge of processes, approaches, tools and techniques of product design; ability to convert customer and market requirements into product design.Level Working KnowledgeParticipates in the conception process of a manufacturing product vision. Collects and analyzes customer and market requirements, and generates reports. Utilizes design methods to implement the construction of a new design model. Uses automated tools to design or modify the design of a product. Assists in the testing and refinement of a new product design.Product Design and DevelopmentKnowledge of product features; ability to design, build, and develop a new product, technology, or service from concept through to production.Level Working KnowledgeBuilds three-dimensional models with basic materials. Communicates with professionals to understand various requirements of product design. Tests and evaluates alternative means of production being considered for use. Uses automated tools to design or modify the design of a product. Assists in building a complex prototype of product.This is intended as a general guide to the job duties for this position and is intended for the purpose of establishing the specific salary grade. It is not designed to contain or be interpreted as an exhaustive summary of all responsibilities, duties and effort required of employees assigned to this job. At the discretion of management, this description may be changed at any time to address the evolving needs of the organization. It is expressly not intended to be a comprehensive list of essential job functions as that term is defined by the Americans with Disabilities Act.

Career Area: Engineering : Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you'rejoining a global team who cares not just about the work we do but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don'tjust talk about progress and innovation here we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Role DefinitionEngineering Change Management and BOM Updates support for Large Power Systems Products (Reciprocating Engines & Gensets) Manufacturing Responsibilities Engineering support for the Change Management process to support Operations team during introduction and regular production of engines and gensets, and support resolve issues from shop floor with high velocity Perform / ensure accurate BOM updates or changes in CBS system at the facility per product engineering specs in coordination with Facility Change Coordination and Product Management teams Lead / Support key Change Management process steps that include - Receiving change notification requests (PACN / PLACN / EDS Notification/ Job Number), Reviewing and determining necessary change actions in the facility based on product checks, effectivity dates, etc., Implementing updates in the CBS systems following standard procedures, coordination with the Facility change coordination team and other relevant cross functional teams as required, managing further change actions to the established effective dates as required by working with the Manufacturing teams, etc. Document and maintain the change process and tools with metrics for review and support improvement opportunities Requires bachelors degree in mechanical engineering or equivalent, experience working on Power Systems Design / Development / Manufacturing processes, Proficiency in change management and tools like CBS, etc. Requires Proficiency with ProE, TeamCenter, and other design / BOM management tools, knowledge of New Product Introduction and Current product issue resolution processes Requires proficient communication and coordination skills Degree RequirementDegree required Skill DescriptorsAnalytical ThinkingKnowledge of techniques and tools that promote effective analysis; ability to determine the root cause of organizational problems and create alternative solutions that resolve these problems.Level Working KnowledgeApproaches a situation or problem by defining the problem or issue and determining its significance. Makes a systematic comparison of two or more alternative solutions. Uses flow charts, Pareto charts, fish diagrams, etc. to disclose meaningful data patterns. Identifies the major forces, events and people impacting and impacted by the situation at hand. Uses logic and intuition to make inferences about the meaning of the data and arrive at conclusions. Effective CommunicationsUnderstanding of effective communication concepts, tools and techniques; ability to effectively transmit, receive, and accurately interpret ideas, information, and needs through the application of appropriate communication behaviors.Level Working KnowledgeDelivers helpful feedback that focuses on behaviors without offending the recipient. Listens to feedback without defensiveness and uses it for own communication effectiveness. Makes oral presentations and writes reports needed for own work. Avoids technical jargon when inappropriate. Looks for and considers non-verbal cues from individuals and groups. Managing Multiple PrioritiesKnowledge of effective self-management practices; ability to manage multiple concurrent objectives, projects, groups, or activities, making effective judgments as to prioritizing and time allocation.Level Working KnowledgeRecognizes changing demands and priorities; validates changes with management. Obtains information about how current assignments contribute to organizational goals. Completes current work according to assigned priorities. Responds to day-to-day operational priorities while still making progress on project work. Performs at least 2-3 concurrent activities without reducing productivity. Technical ExcellenceKnowledge of a given technology and various application methods; ability to develop and provide solutions to significant technical challenges.Level Working KnowledgeProvides effective technical solutions to routine functional challenges via sound technical competence, effectively examining implications of events and issues. Effectively performs the technical job aspects, continuously building knowledge and keeping up-to-date on technical and procedural job components. Applies technical operating and project standards based on achieving excellence in delivered products, technologies and services. Applies current procedures and technologies to help resolve technical issues in one's general area of technical competence. Helps others solve technical or procedural problems or issues. Computer-Aided Design & EngineeringKnowledge of tools and techniques of specialized graphics programs; ability to produce, analyze, simulate and test product design drafts.Level Working KnowledgeGenerates specifications for parts or components with CAD software. Reuses design components via reusable libraries following standard procedures. Uses CAD to perform basic drafting such as wire frames, solid objects and array of objects. Performs routine changes to computerized schematics or drawings. Creates views of objects in 2 and 3 dimensions; creates perspective drawings and orthogonal views. Product Design - MFGKnowledge of processes, approaches, tools and techniques of product design; ability to convert customer and market requirements into product design.Level Working KnowledgeParticipates in the conception process of a manufacturing product vision. Collects and analyzes customer and market requirements, and generates reports. Utilizes design methods to implement the construction of a new design model. Uses automated tools to design or modify the design of a product. Assists in the testing and refinement of a new product design. Product Design and DevelopmentKnowledge of product features; ability to design, build, and develop a new product, technology, or service from concept through to production.Level Working KnowledgeBuilds three-dimensional models with basic materials. Communicates with professionals to understand various requirements of product design. Tests and evaluates alternative means of production being considered for use. Uses automated tools to design or modify the design of a product. Assists in building a complex prototype of product. This is intended as a general guide to the job duties for this position and is intended for the purpose of establishing the specific salary grade. It is not designed to contain or be interpreted as an exhaustive summary of all responsibilities, duties and effort required of employees assigned to this job. At the discretion of management, this description may be changed at any time to address the evolving needs of the organization. It is expressly not intended to be a comprehensive list of essential job functions as that term is defined by the Americans with Disabilities Act.

Technical Skills : Knowledge of piping materials & Specifications. Knowledge / Experience in PDS/PDMS. Area Layout Preparation & Development. Knowledge of Piping Design. Piping Stress Analysis. Lead the development, review, and optimization of piping designs for oil and gas facilities, ensuring adherence to industry standards, codes, and regulatory requirements. Management of CAD & 3D Modelling. Code Calculation. Checking Piping Design Models Perform stress analysis, material selection, and develop piping specifications for various projects. Team Management & Resource Acquisition. Manage and coordinate piping engineering aspects within multidisciplinary project teams, ensuring seamless integration of designs into overall project plans. Special Skills : Good Communication in English (Written & Spoken) Experience in Multi Discipline engineering environment. Provide technical guidance and mentorship to junior engineers, Designers and Draughtsman fostering their professional growth in piping engineering. Ensure that all piping designs comply with safety standards, environmental regulations, and industry codes.

- Mechanical Engineer with 5-10 Years of experience in Piping Design & drafting using Bentley OpenPlant Or usage of MicroStation V8i - Proficient in use of Microsoft Office Package - Experience in AutoCAD latest version - Ability to convert AutoCad data into Intergraph MicroStation - Familiarity with Gas Turbine Power Plant Design - Experience in 3D modelling of pipe, pipe supports and plant related equipment - Familiar with drafting standards, symbols, nomenclature, engineering terms, proper use of materials, reference books and catalogs. Job Responsibilities: - Create, revise and maintain Piping models using Bentley OpenPlant Environment - Create, revise and maintain Equipment models in Bentley OpenPlant Environment - Create Piping and Structural Drawings using 3D models - Create equipment layout drawings using 3D models - Create AutoCAD Sketches as required. (This is very minimum) - Create and revise as needed various foundation drawings - Handle complex drafting assignments under minimal supervision - Understand and incorporate engineer’s redlines

Ganesh Benzoplast is looking for Piping Engineer to join our dynamic team and embark on a rewarding career journey Piping engineers design and develop piping systemsPiping engineers use software programs to conduct stress analysis on piping systems to ensure that they can withstand the required pressure and temperature Piping engineers develop detailed specifications for piping systems, including pipe size, thickness, and support requirements Piping engineers oversee the installation of piping systems to ensure that they are installed correctly and that they meet all specifications

Role & responsibilities 1. Assist project team in preparing MTOs and BOQs from Isometrics 2. Entry of Piping and Welding data in the companys in-house piping solutions in TrooNote 3. Co-ordinate with the IT team in identifying any challenges in the system and getting them resolved 4. Assist with project team in preparing Test Packs for piping works and keeping track of the activities Produce piping works reports as and when required to monitor progress Preferred candidate profile 1. Hands on experience in measurement of UG and AG piping works 2. Prepare MTO from the Isometric drawings 3. Measure piping work quantities based on SMM and project specific D&M 4. Knowledgeable in various types of Pipe Supports and able to prepare MTOs & BOQs 5. Able to prepare weld maps, field joints location grouping and mating spools IDs 6. Working well versed experience in MS Excel 7. Good oral and written communication Working knowledge in AutoCAD for piping is required

Bachelor's degree in Finance, Accounting, Information Systems, or related field. Strong understanding of financial accounting principles and processes. Experience with SAP Controlling module implementation and configuration. Proficiency in SAP CO components such as cost center accounting, profitability analysis, and internal orders. Ability to gather and analyze business requirements and translate them into SAP CO solutions. Excellent communication and interpersonal skills. Strong problem-solving abilities and attention to detail. Ability to work effectively in a team environment and collaborate with cross-functional teams. SAP certification in Controlling (optional but preferred). Experience with SAP S/4HANA Finance (preferred).

Role & responsibilities To check models and Fabrication & Erection drawings as per spec / scope on time, within budget and to render support to the IR/Detailing Team in terms of Quality, Productivity & Delivery. Checking of MTO models in Tekla structures and performing completeness checks. Checking of G.A. & marking plan drawings for all types of structures. Generation of technical queries and administration of same. Review and updating of detailed structures for meeting the safety standards. Checking of preliminary material lists and associated rolling and carcass drawings. Checking of bolt location and bolt summary lists. Checking and incorporation of sub-trades details e.g. flooring, decking, cladding etc.) into relevant models Co-ordination and administration of contracts whenever necessary Checking of Typical and mass connection as per Design Calc Model Clash Check Checking of fabrication drawing for all type of main structural members of all types of Building structures Model and drawing checking of miscellaneous items. Quality checks. Like Interface check, Bolt access, Weld access, Erection feasibility, etc. Depending on projects requirements checking of Galvanizing holes, Finish, Deck supports requirements, etc Checking the bought out items. Like Safety gates, Sag rods, Studs, etc., Client comments review and updations check Approval and fabrication packs check Working model and completeness check Core Job Skills Knowledge in Structural Steel Detailing Checking of fabrication and erection feasibilities Knowledge of fabrication and erection Understanding client drawings and details Reading design calcs and connection marking plans Knowledge and application of WHIL procedures Preferred candidate profile 6-8 years' experience in Structural Steel Detailing using Tekla in which 4 years exclusively in checking. Tekla, Autocad, MS Excel and MS Word. Perks and benefits Medical Benefits Subsidy Food & Transportaion

Roles and Responsibilities : Candidate would be responsible for 3D modelling and generation of 2D drawings, structural items for Fired Heater / Piping related projects being executed by the company. Job Includes the following activities : Modelling as per project specifications and applicable codes (API 560,IS 800, etc.) Skillful in Structural Design,3D Modelling,checking and detailing. 3D modelling of Structure, Equipment, and accessories in Autodesk Advance steel software. Detail Engineering. Generation of GA, Fabrication drawings, Structure and Equipment. Generation of Bill of Materials (MTO) Drawing checking. Supervision of Drafting Work. Review of sub-vendor drawings and designs Preparation of procurement lists Coordination between different departments / agencies involved. Any other activity required to ensure job completion in time and as per client requirements. Desired Candidate Profile : Education: B.Tech./Diploma in Mechanical Engineering/ Drafting Good knowledge of the Advance steel software is required. Good knowledge of Fired Heaters related codes and standards as generally applicable to Refining, Oil & gas industry (API 560, IS 800). Candidates should have knowledge of steel connection types & details. Candidate should have good communication, PR skills and should be good at computer usage. Candidate with knowledge / experience in applicable codes and software of pressure parts design, structural design and mechanics would be preferred. Other Details : Experience Required : 3-5 years Salary : INR 4,00,000 - 6,00,000 P.A. Employment Type : Full Time, Permanent Industry : Oil and Gas / Petrochemical/ Chemical/ Heavy Fabrication Functional Area : Engineering Design, R&D Location : The location for the job would be Noida office. However the candidate should be willing to relocate as and when required by the company. No. of Vacancies : 5 Queries ? If you have any questions, please feel free to contact us through email on hr@esteem.co.in Recruitment related queries are not normally responded over phone. Company Profile: Esteem Projects Pvt. Ltd. http://www.esteemprojects.com Esteem supplies Fired Heaters ( Heaters, Cracking Furnaces , Reformers, Waste Heat recovery Units , Process Furnaces ) and related equipment to the Hydrocarbon and Chemical industries spanning Oil and Gas, Petrochemical, Refining, Fertilizer and related sectors. Design, supply and construction of Fired Heaters (from Turnkey projects to revamps) designed to API 560 or other international standards form the core of our business. We have capabilities to provide furnaces based on our own design or the basic design supplies by clients / consultants like Technip, HTAS, EIL, PDIL, ABB, CB&I etc. Queries? If you have any questions, please feel free to contact us through email on hr@esteemprojects.com Recruitment related queries are not normally responded over phone.

Quantity Survey Engineer Company: Alutec WLL Business Unit: Materials Reports to: Sr. Material Planning Engineer Location: Pune, Maharashtra & Kochi, Kerela (Both on-site) Job Summary: The Quantity Survey Engineer -Faade is responsible for precise quantity take-offs and the timely preparation of Material Take-Offs (MTOs) specifically for faade-related components such as aluminum profiles, glass panels, brackets, gaskets, and fixings. This role ensures strict adherence to project specifications and supports the material planning process by coordinating with design, procurement, and planning teams. The position is critical to maintaining material accuracy, minimizing waste, and ensuring timely delivery of faade materials to meet project milestones. Key Responsibilities: Faade Quantity Take-Offs: Perform detailed quantity take-offs from architectural and shop drawings specific to faade systems. Prepare accurate and comprehensive MTOs for bulk procurement of faade materials. Specification Compliance: Review faade specifications and ensure all materials align with project and client requirements. Identify and resolve discrepancies in material specifications in coordination with design and procurement teams. Cross-Functional Coordination: Collaborate with design, procurement, and planning departments to ensure timely material availability. Provide technical support to resolve material-related issues during planning and execution phases. Documentation & Reporting: Maintain up-to-date records of quantity take-offs, MTOs, and material schedules. Generate regular reports on material planning status and submit to the Sr. Material Planning Engineer. Qualifications & Skills: Education: Degree or Diploma in Civil or Mechanical Engineering. Experience: Minimum 3 years in quantity surveying or material planning, preferably in the aluminum faade or curtain wall industry. Skills: Strong analytical and planning capabilities. Proficiency in quantity take-off software (e.g., AutoCAD, Bluebeam, Rivet Excel). Familiarity with faade systems, materials, and installation methods. Excellent attention to detail and communication skills.

Experience in detailed engineering, Plant Layout, Piping layouts, Piping GA Drawings, Isometrics Development of Piping Material Specifications, Material take off. Should have working experience on international piping standards Having Exposure of PDMS Software. Should be an effective communicator & team leader, able to handle team of engineer & designers.

Experience in SAP PP" Must have S4 HANA knowledge and Fiori apps. Experience in implementation, roll out, support Experience in supporting processes in PP- MTS, MTO, ETO, ATO, MRP, Production Execution, LTP, SOP Experience of Production Planning & Execution, Direct & Indirect Procurement process, Subcontracting process, Consignment process Functional integration aspects with other SAP modules Customizing experience in BOM, Routing, Work center, Production Orders, Batch Management, Serialization and Handling Units management "Knowledge of Debugging Very good experience in client communication & working with the client from offshore

Hi all, We are hiring for the role SAP CO Consultant - Product Costing, Inventory & Profitability Analysis Experience: 8 - 12 Years Location: Bangalore Notice Period: Immediate - 15 Days Job Description S/4 HANA CO Consultant with 8 ~ 10 years of relevant experience Support Project Technical Skill sets: S/4 HANA Controlling - specialization in Profitability Analysis Should have worked on at least two E2E Implementations on SAP S/4 HANA with General Controlling, Product costing and CO-PA. Should be well versed in demonstrated configuration skills in key areas like Cost center accounting, profit center accounting and internal orders. Candidate should have experience in writing Functional Specifications independently and should have worked on Custom Objects build from Scratch to Deployments. Experience with designing, building and deploying process MTO (Make to order) and MTS (Make to stock). Material ledger configuration for material valuation in multiple currencies and actual cost calculation for actual material reports. Material Ledger, multiple valuations, able to perform a kind of real-time consolidation across the group for all purchases, manufacturing, sales, intercompany sales etc. removing intercompany revenues & COGS in real-time. Experience executing a business blueprint and documenting business requirements that can be understood by a technical process team. Expert with cost accounting, and product costing/inventory valuation. Strong knowledge of the following scenarios i.e. Product cost by order, Product cost by period, Product cost by sales order. Experience to Configure Report Painter, SAP queries. Should have experience on migration Cockpit. Should have experience in controlling month end year-end activities. Must have experience in configuration and enhancement in COPA characteristic derivation and valuation. Must have worked with various reporting requirements in COPA . Must have configured COPA planning functions. Design and Configure CO-PA ( Profitability Analysis) reporting, forms, derivation rules and structures, product and customer hierarchy, PA settlement, realignments, and integration issues. Cross module Integration of CO with SD (Sales & Distribution), MM (Materials Management) and Production Planning. Must Have Skills: Deep expertise on SAP S4 HANA CO application functionality, design and implementation. S4 HANA Implementation & support experience in SAP CO including CCA, PCA, IO, CO-PC, CO-PA, CO-MM. Must be skilled in user support, troubleshooting and error resolution. Must have good experience in WRICEF Must have worked on Interfaces using IDOCs, ALE, Proxies, EDI and RFC. Must have strong business understanding and suggest SAP solutions for various business scenarios Ability to help resolve complex issues and independently manage critical/complex situations Perform detailed analysis of complex business process requirements and provide appropriate system solutions; identify, interpret, validate and document customer requirements Use ABAP debugging skills to troubleshoot issues Collaborate with ABAP developers to understand their code, read ABAP code, and assist in debugging, ensuring efficient and effective ABAP solutions Work self-directed and independently; may act as subject matter expert (SME) If you are interested drop your resume at mojesh.p@acesoftlabs.com Call: 9701971793

About Us Tata Consulting Engineers Limited (TCE) is the largest Indian private sector engineering and project consultancy and an emerging global leader in integrated engineering solutions. With more than 60 years of engineering excellence, TCE has a presence in over 64 countries and over 12000 completed projects, the company operates in 3 core Industry segments -Infrastructure (Water, Environment, Urban Development, Buildings, Manufacturing Facilities, Ports and Harbours, Transportation), Power (Thermal, Hydro, Nuclear, Renewable, Transmission and Distribution) and Resources - Hydrocarbons and Chemicals (Oil, Gas and Refineries, Chemicals, Petrochemicals, Fertilizers, Speciality Chemicals, Pulp and Paper, Cement, Food, Pharmaceuticals and Beverages, Tyre, Glass) as well as Mining and Metallurgy (Mining, Geology, Beneficiation, Steel, Non-ferrous). TCE serves domestic as well as international markets and is known for several first-of-its-kind projects offering Engineering Studies, Design Engineering Services, Project Management Consultancy Services, OPEX and IIOT across all three verticals. A part of Tata Group - India’s most respected group, TCE is a 100 percent subsidiary of Tata Sons Limited Design your Future with us At TCE, you will experience a supportive environment that empowers you to excel, whether you are based in our offices or at a client site. We embrace diversity, equity, and inclusion, fostering a workplace where every individual can thrive by contributing their unique skills and perspectives to deliver exceptional results for our clients. Our comprehensive compensation and benefits packages are designed to meet the diverse needs of our employees and their families, complemented by a robust global well-being program. As a leading global infrastructure firm, we are committed to your growth and success, offering access to cutting-edge technology and impactful projects that offer flexibility and significant professional opportunities. Join us and become part of a global company that values your potential and supports your career development. Purpose & Scope of Position The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience • 10+ years of experience in relevant design discipline • Experience in engineering and package coordination Qualification • Postgraduate or graduate in an engineering discipline • Registration as a professional engineer with the governing authority (preferable) Key Responsibilities Piping Material Specification. Datasheets for Valves & special Parts. Preparation & Handling Material Requisitions Technical bid evaluation of Valves & Special Parts. Vendor Document Review. Pipe Wall Thickness calculation - Internal, External Pressure. Pipe Wall Thickness calculation for Hydrogen service as per ASME B 31.12. Blank thickness calculation. Hydro test Calculation. MTO Co-ordination. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity Being Resilient

Faade Designer responsible for developing detailed drawings of curtain walls, cladding, glazing, and aluminum systems, coordinating with architects/engineers, ensuring compliance with codes, and supporting material selection and technical detailing.

10+ years of experience in industry sectors of Oil & Gas, Refinery, and Petrochemical, Instrument / JB Modelling – SP3D and/or PDS, E3D, Cable routing, cable scheduling, SPI, MTO

Create Piping Layout, Plans, Equipment Layouts, Piping BOM, Supports and Isometrics using AutoCAD 2D Collect data from sites and prepare drawing Understand PMS,VMS & P& ID. Proficiency in ADSK Plant3D/Cadworks software will be an added advantage. Provident fund

Role & responsibilities Basic engineering calculation such as pipe sizing, pressure drop calculation, temperature drop, pump sizing calculation, IBR thickness calculation, PRDS sizing, safety valve sizing, tanks sizing, equipment sizing etc., Preparation of valve schedule, line list & insulation schedule Preparation of Bill of material preparation for piping, valves & specialties for procurement. Preparation of bid document for all type of valves, all type of specialties, pumps, tanks, vessels, plate type heat exchanger & piping. Technical review of all the drawings submitted by the vendors for their respective power plant equipments. Preparation & review of Overall Layout, Equipment Layout, isometric & piping layout drawings. Review of 3D Model in Navis Preferred candidate profile B.E ( Mechanical ) with 8 to 12 Years of experience in experience in basic engineering calculation such as pipe sizing, pressure drop calculation, temperature drop, pump sizing calculation, IBR thickness calculation, PRDS sizing, safety valve sizing, tanks sizing, equipment sizing etc., Perks and benefits

Should be a Team Leader/player and effectively Manage Team of Engineers/Designers/Draftsman,Activities and PipingDeliverables, set up schedule and co-ordinate activities with other disciplinesduring BID phase, FEED Phase and Detail Engineering Phase as per the requirements of Contract, Manage Piping Material Take off, Specification, Material requisition, Technical Bid Evaluation for procurement and vendor follow up., Manage 3D Model Reviews, Guarantee proper Work flow, interfaces, quality checks and approval of piping project documents, Conform Piping Efficient working,Project Progress, monitor and control man-hour budget. We re hiring Senior Piping Engineer for one of our Leading MNC in Oil & Gas to join their growing team. This position is based out in Chennai. Education: BE /ME Mechanical Minimum 2 / 3 EPC or Detailed engineering projects worked as a Lead / Area Lead 15 years with min 5 years in Oil & Gas Industry. Exposure to Field Engineering , Basic/FEED engineering.

1. Proficiency in AutoCAD (knowledge of piping design is a plus). 2.Good understanding of engineering and technical drawings. 3. Strong attention to detail and problem-solving skills. 4. Ability to work in a team and meet deadlines.

• 8+ years of relevant experience in electrical design engineering, specifically using SP3D (SmartPlant 3D). Solid understanding of electrical systems for industrial or infrastructure facilities (power distribution, lighting, grounding, etc.).

Role & responsibilities: Daily BOM Processing as per claims requirement received from FO BOM Processing of MTS & MTO Parts Release orders from System Raise non-std requirement to MMSE Co-ordination with various stakeholders planners/MMSE/production Maintain SO Vs Claims data. Publish Daily BOM processing MIS internally. Publish Monthly MTS ID creation requirement to MMSE. Errorless BOM processing Authorities: Claim BOM addition and pricing accuracy AMR BOM addition and pricing accuracy Preferred candidate profile: Education: BE Mechanical/Production/Automobile/Diploma/ Graduate Professional skills: Macros in Excel. SAP In-depth knowledge of Schindler elevator products and parts Statistical data analysis Ability to work in Cross Functional teams for quick solution to field team Proficiency in computers, MS Office, Power point Product Knowledge Continuous Improvement Mindset Focus on Customer centricity SAIS Process Knowledge Professional experience: 1-3 years of expierence in SAP