43 Motor Control Jobs

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 6+ years of work experience is preferred. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Electrical design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with Secondary Design for HV, MV Substations and Transmission Lines is preferable. Chartership or Fellowship with IET or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation, operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 8+ years of work experience is preferred. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Electrical design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with Secondary Design for HV, MV Substations and Transmission Lines is preferable. Chartership or Fellowship with IET or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 10+ years of work experience is preferred. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Electrical design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with Secondary Design for HV, MV Substations and Transmission Lines is preferable. Chartership or Fellowship with IET or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Qualifications Minimum Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Overall 7+ years of work experience is preferred.

Role & responsibilities Define and develop SW architecture and flow for Motor Control & Vehicle Control ECUs Interface with MCU vendors to build low-level drivers and firmware Implement CAN, LIN, SPI, UART and other automotive protocols Develop motor control algorithms (FOC, PI controllers, etc.) for BLDC/PMSM motors Create application software for end-of-line testing , system functionality, and validation Work on ASPICE-compliant SW development processes (V Model, Agile) Conduct HIL testing , define test cases, and perform validation Support debugging, bring-up, and bug fixing during prototype stages Preferred candidate profile Embedded C for MCU programming PWM, ADC, Timers, and I/O configuration Simulation using MATLAB/Proteus Tools like MPLABX, CodeWarrior, CS+ CAN tools (Vector), HIL setups Experience with bootloaders , GUI development , and test scripting

B.Tech (Ele.) with 10+ yrs (2+ ys in foundry) or Diploma with 12–15+ yrs (5+ yrs in foundry) as Sr. Maintenance Manager or above. Responsible for managing electrical maintenance of induction furnaces, EOT, leading team, minimize downtime

Candidates should have knowledge of PLCs Programming, configuration, wiring , communication, Scada designing, HMI, VFD, Motor, Motion control, Electrical panel and process instrumentation. Troubleshooting and resolving issues with automation systems

Role & responsibilities Perform routine maintenance on mechanical and electrical equipment and systems. Diagnose and repair electrical issues such as motor controls, wiring, lighting, and switchgear. Troubleshoot and repair mechanical systems including conveyors, pumps, gearboxes, HVAC, and other plant equipment. Should have knowledge on Utilities like, DG, Compressors, Chilling Plant, Industrial RO & DM plant, fire alarm system etc Install, test, and commission new machinery and electrical components. Conduct regular inspections to identify potential problems and implement solutions Proactively. Performing routine tasks to preventive maintenance to prevent breakdowns and ensure the long-term reliability of equipment and systems. Reviewing blueprints to understand wiring placement. Maintain accurate records of maintenance work, repairs, and parts usage. Ensure compliance with safety regulations, company policies, standard operating procedures, Quality assurance and Health and Safety to ensure that all work is undertaken in accordance with the Industry's best practices Respond to emergency maintenance requests in a timely and efficient manner. Collaborate with production and other departments to schedule maintenance without disrupting operations. Participate in continuous improvement and preventive maintenance programs. Maintain stocks of critical spares and other stock pertaining to responsibilities. To liaise and co-operate with the visits of auditors, and other visiting disciplines to ensure the continuing efficient operation of the plant without disruption to the occupants and providing them the complete technical assistance with their queries. Preferred candidate profile Diploma or ITI in Electrical/Mechanical Engineering or related technical field. • Proven experience (7+ years) as a maintenance technician in a manufacturing unit. • Strong knowledge of electrical systems, PLCs, motors, control panels, and mechanical equipments. • Ability to read and interpret technical manuals, blueprints, and schematics. • Skilled in the use of hand and power tools, diagnostic equipment, and machinery. • Strong problem-solving skills and attention to detail. • Ability to work independently and in a team. • Flexibility to work shifts • • Location: Panipat (Haryana)

- Job Responsibilities: Support for the design of embedded software (C language) for automotive brushless motor products, and participate in the design of the overall system scheme and the determination of software control algorithms Support for the construction of embedded software architecture, code writing and debugging, and system testing Support for product testing and monitoring, design of calibration software Support for the subsequent continuous improvement of product software Support for ASPICE process documentation and auditing for automotive SW projects Job requirements: Bachelor/Master degree, major in motor control, electronics, electrical, automation Familiar with the position sensorless control algorithm of BLDC square wave and sine wave, FOC, space vector control, experience in related projects is preferred Proficient in at least one 16 or 32-bit microcontroller software design; proficient in Infenon or arm cortex software/hardware design is preferred Familiar with Matlab/Simulink modeling and simulation , and proficient in using at least one circuit simulation (Multisim, Pspice, Seber, etc.) software. Experience in applying matlab motor control software to automatically generate is preferred Familiar with automotive electronics, body network ( CAN/LIN protocol ), experience in related automotive projects is preferred Practical experience with ARM-based SW architecture development for BLDC motor drives Come join our global, inclusive & diverse team Our purpose is to improve the quality of life of everyone we touch through our innovative motion systems. We are a truly global team bound together by our shared values. Our culture is built on the diversity, knowledge, skills, creativity, and talents that each employee brings to the company. Our people are our company’s most valuable asset. We are committed to providing an inclusive, diverse and equitable workplace where employees of different backgrounds feel valued and respected, regardless of their age, gender, race, ethnicity or religious background. We are committed to inspiring our employees to grow, act with ownership and find fulfilment and meaning in the work they do.

Job Responsibilities: Responsible for the hardware circuit design of the brushless DC/BLDC/PMSM motor and the controller of the DC motor, the simulation design and analysis of the core hardware part Responsible for hardware requirement capture, analysis and documentation. Electronic component selection, control circuit schematic design, PCB layout design , and commissioning and testing of single-board components Work with software engineers to complete the commissioning and testing of the motor drive; Responsible for the compilation of project-related technical documents, BOM output and DFEMA; Responsible for Hardware qualification (CVT, DVT and PVT), EMC/EMI certification Lead the development of Hardware design, prototyping and validation quality processes Job requirements: (Please alter the Job requirements as per the JD Please) Bachelor/Master degree, major in motor control, electronics, electrical, automation Familiar with the position sensorless control algorithm of BLDC square wave and sine wave, FOC, space vector control, experience in related projects is preferred Proficient in at least one 16 or 32-bit microcontroller software design; proficient in Infenon or arm cortex software/hardware design is preferred Familiar with Matlab/Simulink modeling and simulation, and proficient in using at least one circuit simulation (Multisim, Pspice, Seber, etc.) software. Experience in applying matlab motor control software to automatically generate is preferred Familiar with automotive electronics, body network (CAN/LIN protocol), experience in related automotive projects is preferred Practical experience with ARM-based SW architecture development for BLDC motor drives - Lead complex projects - Meet customers to understand and design products according to customers' requirements - Share and transfer knowledge to other engineers Come join our global, inclusive & diverse team Our purpose is to improve the quality of life of everyone we touch through our innovative motion systems. We are a truly global team bound together by our shared values. Our culture is built on the diversity, knowledge, skills, creativity, and talents that each employee brings to the company. Our people are our company’s most valuable asset. We are committed to providing an inclusive, diverse and equitable workplace where employees of different backgrounds feel valued and respected, regardless of their age, gender, race, ethnicity or religious background. We are committed to inspiring our employees to grow, act with ownership and find fulfilment and meaning in the work they do.

JOB DESCRIPTION / SKILLS REQUIRED Assist in the design and selection of traction motors (PMSM, BLDC, Induction) for 3W, LCV, and HCV EV applications. Support motor performance optimization, including efficiency, torque, and thermal management. Conduct motor simulations using MATLAB, Ansys, JMAG, or Motor[1]CAD. Work on motor control strategies, including FOC (Field-Oriented Control) and torque-speed optimization. Assist in motor testing, validation, and dyno testing as per industry standards. Ensure EMI-EMC compliance and assist in addressing motor-related EMI issues. Support motor integration with VCU, battery, and powertrain systems. Assist in CAN communication setup, creating motor-related CAN matrix and DBC files. Analyse motor-related field issues, conduct fault diagnosis, and support warranty claims. Contribute to next-gen motor technology development and innovation. AREAS OF SPECIALISATON Experience with motor design and simulation tools (MATLAB, Ansys, Motor-CAD). Understanding of motor control techniques (FOC, DTC, PWM strategies). Hands-on experience in motor testing, NVH analysis, and thermal management. Basic knowledge of EMI-EMC compliance and ISO 26262 functional safety. Strong problem-solving, teamwork, and communication skills.

Role Summary This role is to work as part of an engineering consultancy design team in India, taking a senior role in project design work, focused on production and liaison with the WSP UK Industry Team. Responsibilities Carrying out Electrical design work typically from 11kV substation, through LV switchboards, distribution, MCC’s, Lighting, small power, lightning protection and associated electrical services such as fire alarms, PA systems etc. Input into package plant specifications. Preparing Installation Specification and contract schedules. Leading CAD team in production of electrical drawings. Approving and checking of all Electrical design work on allocated projects. Supporting UK on technical bids. Technical liaison with Suppliers, Package Vendors and Sub-contractors. Preparation of Design Safety Reviews and designers risk assessments. Input to schedule and preparation of man hour estimates/control and monitoring. Managing discipline hours budget and cost of works on allocated project. Mandatory Skills Good interpersonal skills and able to work as part of a multi-discipline team. Versatile, reliable and resourceful Customer focus, commitment to quality management and problem solving. Experience in electrical engineering design on capital projects. Experience of motor controls including variable speed drives. Experience of electrical design in ATEX hazardous areas.

Responsible for designing and optimizing firmware for FOC-based motor control on BLDC/PMSM motors using TI C2000, Infineon Aurix/XMC, and STM32 MCUs. Collaborate on scalable solutions, enhance motor efficiency, and support integration

Job Specs Develop and optimize embedded firmware for motor control applications (BLDC, PMSM, AC induction motors). Implement motor control algorithms like Field Oriented Control (FOC) and Direct Torque Control (DTC). Write and debug firmware for current calibration, encoder angle calibration, and parameter tuning. Collaborate with hardware design engineers to integrate firmware with motor hardware. Conduct HIL testing, debug motor control systems, and validate performance using oscilloscopes, logic analyzers, and motor dynamometers. Adhere to safety standards and maintain detailed technical documentation. Desired Profile Bachelor's or Master's in Electrical/Electronics Engineering or a related field. Proficiency in C/C++ programming, control systems, power electronics, and embedded systems. Expertise in MATLAB/Simulink, PSpice, and microcontroller/DSP platforms (ARM Cortex M). Hands-on experience with CAN, SPI, UART, I2C communication protocols. Knowledge of safety and compliance standards for motor control systems. Preferred Qualifications Experience with HIL testing, real-time programming, and advanced motor control tools. Certification or coursework in motor control, power electronics, or related fields.

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Qualifications Minimum Requirements Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Overall 7+ years of work experience is preferred. Additional Information About AECOM AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options,well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. What makes AECOM a great place to work You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, youll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career youve always envisioned. Here, youll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it.

Sr. Engineer - AS SW Validation Description The Johnson Electric Group is the definite leader in micromotors, motion subsystems and actuators for automotive and industrial applications with expected global revenue of USD 3.4 billion in our current fiscal year. Founded in 1959, Johnson Electric has expanded to be a global force employing over 35,000 people in over 23 countries. We collaborate across businesses, divisions and regions to create innovative solutions to meet the needs of our clients and to help our employees grow. Join us and let s shape the future of Johnson Electric together. We are looking for an Sr. Engineer - AS SW Validation with experience of 4 ~ 8 years, having good exposure to SDLC and ASPICE process, flexible to work on all phases (Requirements - Development -Validation) of the V-cycle to join our organization to support the product deliveries of different Business units in compliance with ASPICE standards Responsibilities Importing the Customer requirements and creating System, Software requirements Creating System and Software Architecture and Detailed design (state machines, flow diagrams...) Create D-FMEA/P-FMEA in compliance with ISO 26262 standards Perform Unit testing and Integration testing Create & automate the test cases for both Software and System testing Create the Test environment for both Software and System testing Create the bidirectional traceability between requirements and test cases Perform reviews on requirements, architecture and test cases Execute the test cases in the Automated test bench Report & track the defects identified during reviews & testing on defect tracking tool Create and manage the Tasks in the Task management tool for each sprint Attend the daily SCRUM meeting and report progress and blocking points to the Lead Engineer Mentor the team on all necessary activities. Document and improve the workflows for all the activities required for ASPICE and ISO 26262 compliance (WHO does WHAT and WHEN). Define detailed Work Instructions on how to perform the activities identified in the workflows (HOW). Take part in ASPICE and ISO 26262 internal and external audits to explain the work performed. Support the Lead Engineer for training BUs to deploy/apply the tools and methodologies required for ASPICE and ISO 26262 compliance. Requirements Qualification : Required Engineering or Science Graduate / Post Graduate in Software / Computer Science / Mechatronics / Electronics with hands on experience in Software + Hardware development of Smart & Direct Actuators System. Software Engineering is preferable. Experience : Minimum 4-8 years work experience in Engineering / Projects at Tier -1 company for automotive industry, preferably from Bosch, Continental, Visteon Knowledge in C / C++ programming for embedded systems - including MISRA-C coding rules. Experience in a domain with safety constraints (Railway, Avionics, Medical, Energy ) or with a quality-rated development process (ASPICE, SPICE, CMMI ) Good exposure to Protocols like CAN, UDS etc.. Good hands-on experience on CANoe, CANanalyzer and CAPL Scripting. Good exposure on ASPICE & ISO-26262 standards is an added advantage. Exposure on Motor control is a plus Good communication in English is mandatory. Eager to learn and improve. Ability to admit ones own mistakes. Self-motivated and collaborative. Knowledge in Python is a plus. Benefits An exciting and very dynamic work environment. A challenging, independent, and interesting role where you contribute to driving business success. Be part of a highly motivated team with a strong team spirit and an openness for flexible / agile working. A truly international work context with great opportunities of development within the company. Innovative thoughts are always encouraged. Come join our global, inclusive & diverse team Our purpose is to improve the quality of life of everyone we touch through our innovative motion systems. We are a truly global team bound together by our shared values. Our culture is built on the diversity, knowledge, skills, creativity, and talents that each employee brings to the company. Our people are our company s most valuable asset. We are committed to providing an inclusive, diverse and equitable workplace where employees of different backgrounds feel valued and respected, regardless of their age, gender, race, ethnicity or religious background. We are committed to inspiring our employees to grow, act with ownership and find fulfilment and meaning in the work they do.

Sr. Engineer - AS SW Validation Description The Johnson Electric Group is the definite leader in micromotors, motion subsystems and actuators for automotive and industrial applications with expected global revenue of USD 3.4 billion in our current fiscal year. Founded in 1959, Johnson Electric has expanded to be a global force employing over 35,000 people in over 23 countries. We collaborate across businesses, divisions and regions to create innovative solutions to meet the needs of our clients—and to help our employees grow. Join us and let’s shape the future of Johnson Electric together. We are looking for an Sr. Engineer - AS SW Validation with experience of 4 ~ 8 years, having good exposure to SDLC and ASPICE process, flexible to work on all phases (Requirements – Development -Validation) of the V-cycle to join our organization to support the product deliveries of different Business units in compliance with ASPICE standards Responsibilities Importing the Customer requirements and creating System, Software requirements Creating System and Software Architecture and Detailed design (state machines, flow diagrams...) Create D-FMEA/P-FMEA in compliance with ISO 26262 standards Perform Unit testing and Integration testing Create & automate the test cases for both Software and System testing Create the Test environment for both Software and System testing Create the bidirectional traceability between requirements and test cases Perform reviews on requirements, architecture and test cases Execute the test cases in the Automated test bench Report & track the defects identified during reviews & testing on defect tracking tool Create and manage the Tasks in the Task management tool for each sprint Attend the daily SCRUM meeting and report progress and blocking points to the Lead Engineer Mentor the team on all necessary activities. Document and improve the workflows for all the activities required for ASPICE and ISO 26262 compliance (WHO does WHAT and WHEN). Define detailed Work Instructions on how to perform the activities identified in the workflows (HOW). Take part in ASPICE and ISO 26262 internal and external audits to explain the work performed. Support the Lead Engineer for training BUs to deploy/apply the tools and methodologies required for ASPICE and ISO 26262 compliance. Requirements Qualification : Required Engineering or Science Graduate / Post Graduate in Software / Computer Science / Mechatronics / Electronics with hands on experience in Software + Hardware development of Smart & Direct Actuators System. Software Engineering is preferable. Experience : Minimum 4-8 years work experience in Engineering / Projects at Tier -1 company for automotive industry, preferably from Bosch, Continental, Visteon Knowledge in C / C++ programming for embedded systems - including MISRA-C coding rules. Experience in a domain with safety constraints (Railway, Avionics, Medical, Energy) or with a quality-rated development process (ASPICE, SPICE, CMMI) Good exposure to Protocols like CAN, UDS etc.. Good hands-on experience on CANoe, CANanalyzer and CAPL Scripting. Good exposure on ASPICE & ISO-26262 standards is an added advantage. Exposure on Motor control is a plus Good communication in English is mandatory. Eager to learn and improve. Ability to admit one's own mistakes. Self-motivated and collaborative. Knowledge in Python is a plus. Benefits An exciting and very dynamic work environment. A challenging, independent, and interesting role where you contribute to driving business success. Be part of a highly motivated team with a strong team spirit and an openness for flexible / agile working. A truly international work context with great opportunities of development within the company. Innovative thoughts are always encouraged. Come join our global, inclusive & diverse team Our purpose is to improve the quality of life of everyone we touch through our innovative motion systems. We are a truly global team bound together by our shared values. Our culture is built on the diversity, knowledge, skills, creativity, and talents that each employee brings to the company. Our people are our company’s most valuable asset. We are committed to providing an inclusive, diverse and equitable workplace where employees of different backgrounds feel valued and respected, regardless of their age, gender, race, ethnicity or religious background. We are committed to inspiring our employees to grow, act with ownership and find fulfilment and meaning in the work they do.

Design & test electrical system as per safety & legal standard Develop & implement engineering standard Analyze data & resolve issues Oversee installation & commissioning Maintain SOPs & maintenance schedule Evaluate prototypes against specifications Required Candidate profile Electrical Engineer -: Minimum 5-8 yrs of experience in Dairy plant. Good knowledge of preventive maintenance schedule of Plant& Machinery. Diploma or Degree specializing in Electrical field.

Must have experience in component development of either ECUs, Actuators, Motor Control modules, sensors, etc. Role & responsibilities 1. Lead development of ECUs, Actuators, Motor control modules and Sensors development. Also, have basic knowledge of electric vehicle and associated systems like DC-DC converter and Battery. 2. End-to-end ownership from design conceptualisation to implementation in production. 3. Manage a cross-functional team to ensure seamless integration and validation of systems at both component and vehicle level 4.Interpret circuit schematics of ECUs, actuators, sensors and ensure robust design of electrical systems. 5.Initiate, Interact with CFT & Lead the design engineers for system integration to realise the required E&E feature with Quality , Cost and Time. 6.Release all technical specification to suppliers for components/systems for EV systems 7.Validate the components by making proper test cases in both component and vehicle level so as to give issue free product to customer.

Job Description Designation: Electrician Job Location: Ahmedabad Department: Production Grade/ Level: L2 Direct Reporting To: Production head Direct Reportees: New Position/ Back Fill: NEW No. of openings: 2 Introduction of Company : Introduction of Company : Introduction of Company: Since its founding in 2004, KB Associates is well-organized group with proven expertise in processing plants, bottle filling machineries, end-of-line automation, and complete end to end line integration solutions. Our technology products leads the industry with the best customize Packaging Automation using Robotics, Vision guided ViPoCo Technology software, iGripp technology, AGV-AMR, and Digitalisation including factories of the future with advanced technology systems. Visit to Website is a must before interview: www.koldpackindia.in Job Purpose : The Electrical Engineer is responsible for Install, test. Diagnose electrical issues in machinery JOB DESCRIPTION Install, test, and commission new electrical systems and equipment, including industrial machinery, lighting, and power distribution units. Inspect, maintain, and troubleshoot electrical systems, machinery, and control panels to ensure proper operation. Diagnose electrical issues in machinery or electrical distribution systems, performing necessary repairs or replacements. Troubleshoot electrical faults in motors, drives, and electrical circuits and make necessary adjustments or repairs. Work closely with engineering and production teams to install new equipment or machinery, ensuring electrical systems are correctly integrated. Clean and replace electrical components such as cables, switches, and fuses as part of scheduled maintenance routines. Implement routine maintenance schedules and record work done to ensure compliance with factory standards and regulatory guidelines. Qualification: B.E \Diploma Electrical Required Skills: knowledge of electrical systems, machinery wiring, motor controls, PLCs, and other automation systems. CTC per annum: 15k to 25k Total Experience: 2-5 years Work time 9.30am to 6.30pm Working From: Factory Gender: Male Marital Status: Any

Dear candidate, We are looking forModel Based Development Lead for eVCU application Software for Bus and LCV Exp .: 10 to 16 yrs Location : Chennai Model based development of Application Software Control functions for Electric Vehicle Controller using Matlab/Simulink Auto code generation, Model in the Loop testing, Software in the Loop testing for eVCU application software Verification in the Hardware In the loop testing for eVCU application software Interact with Other Stake holders of the project related to application software Experience in Model-Based Function Design and V-Cycle Software Development Process

exp in motor control system design or integration. Broad technical knowledge of main elements for electric/ hybrid vehicle powertrains Exp in calibration of off-the-shelf motor controllers Embedded systems hardware and software design Required Candidate profile Control engineering with the focus on control algorithms for electric motors Vehicle communication networks and diagnostics with focus on CAN bus protocols

Skills : Embedded C and RTOS, ARM Cortex-M/A-based microcontrollers ,motor control parameter tuning and Algorithms,Motor Controller Firmware development, Motor Control Profiles with PE background , Matlab/Simulink modeling, Required Candidate profile Experience in LV, HV applications

Will head Manufacturing & Strategic Alignment of company's goals across the Orgn., foster a culture of improvement & innovation. Handle total Operations, from manpower, projects, budgets & Cultivate and maintain strong relationships with clients. Required Candidate profile Should be from the Electrical Motor, Auto Comp Engineering sector, with experience in a similar role handling overall operations, production, innovations, budgets, strategic operations & clients.

Role : Machine Control -Software Development Location : Gurgaon Exp 4-6 years Mandatory - Micro controller-based development (ARM Cortex based) C language , Data structures (stacks, queues, structures) RTOS Communication protocols ( CAN, SPI, I2C, UART ) ARM/Cortex architecture understanding Micro controller Peripherals (Timer, ADC, SCI, DAC) [HW and SW drivers] Motor control [BLDC, Stepper, Servo] Scripting language (CAPL for Vector) Scripting language (Python) Integrated development environment (Keil uVision) SW design tools (Enterprise Architect/Visio-Activity diagrams, Sequence diagrams, Flow charts) Debugging tools (JTAG) UML Concepts to design and architecture SW versioning and control (TFS) Able to read Schematics Tasks & Responsibilities: • Understand system requirements and specifications • SW Design ( activity diagram, sequence diagrams, flow charts) • Embedded SW development in C language • Design test cases and test execution