1700 Modbus Jobs - Page 5

Job Title: BMS Engineer (Building Management Systems) Location: Delhi, Bengaluru, Kolkata Salary: ₹30,000 and above (commensurate with experience) Experience: Minimum 2 years Education: B.E. in Electrical, Electronics, or Mechanical Engineering Job Summary: We are seeking a skilled and experienced BMS Engineer to join our team, specializing in the operation and maintenance of Building Management Systems (BMS) within mission-critical Data Center environments. The ideal candidate will possess hands-on knowledge of industry-leading BMS platforms such as Siemens, Honeywell, and JCL , and have a strong understanding of HVAC,PAC, chillers, fire alarm system (FAS), electrical, and security systems integration. Key Responsibilities: Monitor, operate, and maintain the BMS system to ensure optimal performance and reliability in Data Center facilities. Perform system diagnostics, troubleshooting, and root cause analysis of BMS issues. Conduct regular inspections and preventative maintenance of BMS equipment and field devices (sensors, actuators, controllers, etc.). Coordinate with vendors and OEMs for service, support, and software upgrades. Analyze BMS data to identify trends, inefficiencies, and potential improvements in facility operations. Support commissioning and integration of new systems and expansions. Ensure BMS alarms and critical alerts are managed and responded to promptly. Maintain accurate documentation for system configurations, maintenance logs, and performance reports. Work closely with Facility Operations, IT, and Electrical/Mechanical teams to ensure smooth day-to-day operations. Required Qualifications: Bachelor’s degree (B.E.) in Electrical , Electronics , or Mechanical Engineering . Minimum of 2 years of hands-on experience in BMS operations within a Data Center or similar critical infrastructure environment. Proficient in the operation of Siemens , Honeywell , and JCL BMS platforms. Understanding of HVAC, electrical systems, and associated BMS integration. Ability to read and interpret technical drawings, wiring diagrams, and control schematics. Strong analytical, communication, and problem-solving skills. Willingness to work in a 24x7 environment (shift-based operations, if required). Preferred Skills: Exposure to energy management and optimization strategies. Knowledge of IT infrastructure within Data Centers. Familiarity with protocols such as BACnet, Modbus, and LonWorks. Certification in BMS platforms or controls engineering (a plus). You can also send your resume and contact us on Email: kamal@maxxups.com Phone: 8800190013

📢 We’re Hiring: Project Automation Head – Rockwell Location: Indore, Madhya Pradesh Company: Instrumentation & Control Solutions 🌐 Company Profile: Instrumentation & Control Solutions is a pioneer in the field of automation and instrumentation, offering clients comprehensive turnkey solutions. We specialize in technical services such as on-site instrument calibration, maintenance, installation and commissioning, validation, and programming of PLC/DCS systems. 🔧 Position : Project Automation Head – Rockwell Location: Indore, Madhya Pradesh Experience Required: 12+ years Qualification: B.E./B.Tech in Instrumentation, Electronics & Communication, Electrical, or a related field 📝 Key Responsibilities- Lead and manage Rockwell Automation (Allen-Bradley) projects, including CompactLogix, ControlLogix, PlantPAx, FactoryTalk View, and RSLogix 5000 Develop and implement project execution plans, ensuring adherence to timelines and budgets Design, program, and optimize PLC, SCADA, HMI, and DCS systems Coordinate with clients, vendors, and internal teams to ensure seamless execution of automation projects Support internal teams during Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and system commissioning Lead and mentor a team of automation engineers to ensure effective project delivery Handle the operations of the entire automation department 💡 Required Skills & Competencies IN-depth knowledge and hands-on experience with Rockwell Automation (Allen-Bradley) platforms Expertise in PLC, SCADA, HMI, and DCS system programming and troubleshooting Experience in industries such as Pharmaceuticals, Food & Beverage, Oil & Gas, Chemicals, or Utilities Familiarity with communication protocols such as Ethernet/IP, Modbus, Profibus, etc. Strong leadership, problem-solving, and client communication skills Ability to manage multiple projects while ensuring high-quality standards and compliance 🎁 Compensation & Benefits Competitive salary as per industry standards Provident Fund (PF), Employee State Insurance (ESI), and Health Insurance Exposure to cutting-edge industrial automation projects Full-time opportunity 📩 Apply Now! If you meet the above criteria and are passionate about driving automation excellence, we would love to hear from you. 📧 Email: ankur.tiwari@ics-india.co.in 📞 Contact: 9109188512(Ankur Tiwari) Website- https://ics-india.co.in/

Your tasks and responsibilities Hands on Experience on ( WinCC OA, Ignition, Wonderware Archestra System Platform, InduSoft( AVEVA Edge), WinCC, Rockwell Factorytalk View SE) Software development for the purpose of a standardized Visualisation Library Software development for the project specific modules. Strong interaction with the internal customer and team, in some cases with the external customer Actively participate in the definition phase of a project Create project configurations for the components Deploy component in both factory-, and site environments. Verification of deployment of components in factory-, and site environments Analyze, troubleshoot and fix problems Deliver input for test-, and integration plans Equip test environments (prepare, build-, and configure the test environment) Independently execute the integration-, system- and acceptance tests in the factory and on site Provide support within the project team and to outside stakeholders Your profile Knowledge of higher programming languages, like C/C++/C#/PHP/Java Knowledge of Data Base technology (Oracle/SQL/NoSQL) Knowledge of Interfaces to control-systems (Siemens/AB/OPC/Modbus/IEC/SNMP) Knowledge of generic IT technology (AD, XML, (near) RealTime, HTTP(S) Affinity with User-interface programming and Web technology. (pre) Knowledge of Scada systems (Siemens/Schneider Electric/etc. ) and control-systems ( PLC) Basic knowledge of test processes with interest/insight in multidisciplinary environments Experience with Requirements Management, Change Management, Version Control and Test management tools. Enthusiastic result-driven professional Analytically strong and positively critical Proactive, pragmatic and hands-on attitude Strong communication skills with good command of the English language Qualification: B.E. / B. Tech (Electronics / Tele-communication, Instrumentation, Information Technology )

Job Profile: Firmware Engineer (2+ Years Experience) Department : R&D – Embedded Software / Firmware Reports to : Embedded Team Lead / R&D Manager Location : Coimbatore Job Type : Full-time Job Summary The role is responsible for hands-on coding, debugging, hardware coordination, and developing new firmware concepts. You will work closely with the hardware, validation, and production teams to ensure the smooth functioning and reliability of the product. Key Responsibilities Firmware Development · Develop firmware in Embedded C for 8/16/32-bit microcontrollers (e.g. PIC, Nuvoton etc..) · Interface with hardware peripherals: GPIO, ADC, PWM, Timers, UART, I2C, SPI, etc. · Implement communication protocols and control logic · Write modular and well-documented code using best practices · Use version control for firmware New Concept / Feature Development · Support development of new product features and prototypes · Create proof-of-concept firmware for early-stage idea validation · Collaborate with team during features planning · Suggest improvements based on real-world application needs Testing & Debugging · Perform unit-level and integration testing of firmware modules · Use tools like oscilloscope, logic analyzer, UART terminals , and IDE debuggers (e.g., MPLAB, Keil) · Assist validation team in real-time testing and application simulation · Identify and resolve firmware bugs and performance issues · Support hardware-firmware integration testing Hardware Coordination · Understand hardware schematics, pinouts, and datasheets · Work closely with hardware engineers during initial Board power ON · Identify whether an issue is firmware-related or hardware-related · Ensure correct peripheral configurations and timing Documentation & Release · Create documentation: flowcharts · Maintain firmware version history and release notes · Participate in design reviews and code walkthroughs · Provide firmware loading guides for production/QA teams Failure Analysis & Support · Support field testing and production debug · Assist in Root Cause Analysis (RCA) of software-related failures · Implement firmware corrections and validate fixes · Provide debug logs, issue reports, and traceability support for CAPA Skills Required Technical Skills · Proficient in Embedded C programming · Strong understanding of microcontroller internals · Experience with MCUs like STM32, PIC, Atmel, etc. · Hands-on with communication protocols : UART, I2C, SPI, Modbus, etc. · Debugging using IDE tools, serial logs, and lab instruments · Familiarity with interrupt handling, timers, watchdogs, and low-power modes · Structured and maintainable coding style · Strong debugging and analytical skills · Good communication and documentation habits · Team-oriented with a proactive learning attitude

Job Title: Wind Turbine Controller Engineer Location: PowerWind Limited, Bawal, Haryana Experience: 5 to 8 Years Educational Qualification: B.E./B.Tech in Electronics and Communication Engineering or Electronics Engineering Email to Apply: hr@powerwindindia.com Job Description Powerwind Limited is seeking a highly skilled and experienced Wind Turbine Controller Engineer to join our engineering team at our Bawal facility. The ideal candidate will have hands-on experience with MITA and Bachmann controllers and modules used in wind turbine systems. This is a full-time, PAN India projects onsite and plant role ideal for professionals with a strong background in electronics, control systems, and renewable energy. Key Responsibilities: · Design, develop, and troubleshoot control systems for wind turbines, focusing on MITA and Bachmann platforms · Program, test, and validate controller logic for optimal turbine performance and safety · Perform diagnostics and root cause analysis on turbine controller issues · Interface with SCADA systems for monitoring and control integration · Ensure compliance with IEC standards and safety regulations in control system design · Coordinate with cross-functional teams including electrical, mechanical, and software engineers · Support retrofit and upgrade projects for existing turbines · Prepare documentation, technical reports, and operation manuals related to control systems · Provide technical support during turbine commissioning and operation Required Skills and Qualifications: · Bachelor’s degree in Electronics and Communication Engineering or Electronics Engineering · 5–8 years of relevant experience in wind turbine controller engineering · Proven expertise in MITA and Bachmann control systems (hardware and software modules) · Proficiency in PLC programming and industrial communication protocols (CAN, Modbus, OPC, etc.) · Strong problem-solving and analytical skills · Familiarity with wind turbine operational strategies, pitch/yaw systems, and grid interface · Ability to read and interpret electrical schematics and control wiring diagrams · Good communication skills and team collaboration Why Join Powerwind? Work with cutting-edge renewable energy technology Opportunity to contribute to India’s sustainable energy goals Competitive compensation and benefits A collaborative and growth-focused work environment To Apply: Send your updated CV and a brief cover letter to hr@powerwindindia.com with the subject line “Application for Wind Turbine Controller Engineer – Bawal” Additional Information: Applicants are requested to provide Current and Expected CTC along with last three months salary slips Job Types: Full-time, Permanent Pay: ₹50,000.00 - ₹65,000.00 per month Benefits: Health insurance Experience: Mita and Bachmann Controller: 5 years (Preferred) Language: English (Preferred) Location: Bawal, Haryana (Preferred) Work Location: In person Expected Start Date: 10/08/2025

Job Profile: Firmware Engineer (2+ Years Experience) Department : R&D – Embedded Software / Firmware Reports to : Embedded Team Lead / R&D Manager Location : Coimbatore Job Type : Full-time Job Summary The role is responsible for hands-on coding, debugging, hardware coordination, and developing new firmware concepts. You will work closely with the hardware, validation, and production teams to ensure the smooth functioning and reliability of the product. Key Responsibilities Firmware Development · Develop firmware in Embedded C for 8/16/32-bit microcontrollers (e.g. PIC, Nuvotonetc..) · Interface with hardware peripherals: GPIO, ADC, PWM, Timers, UART, I2C, SPI, etc. · Implement communication protocols and control logic · Write modular and well-documented code using best practices · Use version control for firmware New Concept / Feature Development · Support development of new product features and prototypes · Create proof-of-concept firmware for early-stage idea validation · Collaborate with team during features planning · Suggest improvements based on real-world application needs Testing & Debugging · Perform unit-level and integration testing of firmware modules · Use tools like oscilloscope, logic analyzer, UART terminals , and IDE debuggers (e.g., MPLAB, Keil) · Assist validation team in real-time testing and application simulation · Identify and resolve firmware bugs and performance issues · Support hardware-firmware integration testing Hardware Coordination · Understand hardware schematics, pinouts, and datasheets · Work closely with hardware engineers during initial Board power ON · Identify whether an issue is firmware-related or hardware-related · Ensure correct peripheral configurations and timing Documentation & Release · Create documentation: flowcharts · Maintain firmware version history and release notes · Participate in design reviews and code walkthroughs · Provide firmware loading guides for production/QA teams Failure Analysis & Support · Support field testing and production debug · Assist in Root Cause Analysis (RCA) of software-related failures · Implement firmware corrections and validate fixes · Provide debug logs, issue reports, and traceability support for CAPA Skills Required Technical Skills · Proficient in Embedded C programming · Strong understanding of microcontroller internals · Experience with MCUs like STM32, PIC, Atmel, etc. · Hands-on with communication protocols : UART, I2C, SPI, Modbus, etc. · Debugging using IDE tools, serial logs, and lab instruments · Familiarity with interrupt handling, timers, watchdogs, and low-power modes · Structured and maintainable coding style · Strong debugging and analytical skills · Good communication and documentation habits · Team-oriented with a proactive learning attitude Job Type: Full-time Pay: ₹20,000.00 - ₹25,000.00 per month Benefits: Provident Fund Schedule: Day shift Supplemental Pay: Performance bonus Ability to commute/relocate: Coimbatore, Tamil Nadu: Reliably commute or planning to relocate before starting work (Required) Education: Bachelor's (Required) Experience: Embedded C programming: 2 years (Required) MCUs like STM32, PIC, Atmel: 2 years (Required) communication protocols: 2 years (Required) Work Location: In person Speak with the employer +91 8525898380

The OT/ICS Engineer will be leading the setup, commissioning, and operational management of the Cyber-Physical Systems (CPS) lab with a focus on SCADA, PLC, and Industrial Control Systems (ICS). Your responsibilities will include designing and implementing the architecture for the lab setup, deploying industrial control hardware, integrating SCADA software platforms, ensuring operational readiness, monitoring system health, and conducting routine maintenance tasks. You will also be responsible for implementing industrial cybersecurity best practices, conducting security audits, configuring intrusion detection systems, and maintaining documentation related to lab infrastructure. Supporting students, researchers, and external teams in utilizing the lab for projects and simulations will also be part of your role. To be eligible for this position, you should have a B.Tech/B.E. or M.Tech in Electrical, Electronics, Instrumentation, Industrial Automation, or a related field, along with 3+ years of hands-on experience with ICS/SCADA systems. Proficiency in working with PLCs, knowledge of industrial protocols, and experience in OT networking and cybersecurity basics are required. Desired qualifications include exposure to cybersecurity frameworks for OT, experience in setting up CPS testbeds or simulation platforms, and certifications like GICSP, ISA/IEC 62443, or CCNA Industrial. Personal attributes such as strong problem-solving skills, good documentation and communication skills, and the ability to work independently and in interdisciplinary teams are also important. Occasional travel across the country may be required for project execution and coordination with geographically distributed teams. To apply for this position, please submit a cover letter summarizing your relevant experience, along with a resume and the latest passport-size photograph.,

Job Profile: Firmware GSM Engineer (2+ Years Experience) Department : R&D – Embedded Software / Firmware Reports to : Embedded Team Lead / R&D Manager Location : Coimbatore Job Type : Full-time Job Summary The role is responsible for hands-on coding, debugging, hardware coordination, and developing new firmware concepts. You will work closely with the hardware, validation, and production teams to ensure the smooth functioning and reliability of the product. Key Responsibilities Firmware Development · Develop firmware in Embedded C for 8/16/32-bit microcontrollers (e.g. PIC, Nuvotonetc..) · Develop & optimize Firmware for GSM/GPRS/IOT Modules. · Implement OTA updates, error handling, power management · Work with cloud platforms (MQTT/HTTP APIs) for IoT data communication · Interface with hardware peripherals: GPIO, ADC, PWM, Timers, UART, I2C, SPI, etc. · Implement communication protocols and control logic · Write modular and well-documented code using best practices · Use version control for firmware New Concept / Feature Development · Support development of new product features and prototypes · Create proof-of-concept firmware for early-stage idea validation · Collaborate with team during features planning · Suggest improvements based on real-world application needs Testing & Debugging · Perform unit-level and integration testing of firmware modules · Use tools like oscilloscope, logic analyzer, UART terminals , and IDE debuggers (e.g., MPLAB, Keil) · Assist validation team in real-time testing and application simulation · Identify and resolve firmware bugs and performance issues · Support hardware-firmware integration testing Hardware Coordination · Understand hardware schematics, pinouts, and datasheets · Work closely with hardware engineers during initial Board power ON · Identify whether an issue is firmware-related or hardware-related · Ensure correct peripheral configurations and timing Documentation & Release · Create documentation: flowcharts · Maintain firmware version history and release notes · Participate in design reviews and code walkthroughs · Provide firmware loading guides for production/QA teams Failure Analysis & Support · Support field testing and production debug · Assist in Root Cause Analysis (RCA) of software-related failures · Implement firmware corrections and validate fixes · Provide debug logs, issue reports, and traceability support for CAPA Skills Required Technical Skills · Proficient in Embedded C programming · Strong understanding of microcontroller internals · Experience with MCUs like STM32, PIC, Atmel, etc. · Hands-on with communication protocols : UART, I2C, SPI, Modbus, etc. · Debugging using IDE tools, serial logs, and lab instruments · Familiarity with interrupt handling, timers, watchdogs, and low-power modes · Structured and maintainable coding style · Strong debugging and analytical skills · Good communication and documentation habits · Team-oriented with a proactive learning attitude Job Type: Full-time Pay: ₹15,000.00 - ₹20,000.00 per month Benefits: Commuter assistance Provident Fund Ability to commute/relocate: Coimbatore, Tamil Nadu: Reliably commute or planning to relocate before starting work (Required) Education: Bachelor's (Required) Experience: Embedded C programming: 2 years (Required) MCUs like STM32, PIC, Atmel, etc: 2 years (Required) communication protocols: 2 years (Required) Firmware Development for GSM/GPRS/IOT Modules: 2 years (Required) Work Location: In person

Industrial Equipment / Machinery Full-Time Job ID: DGC00967 Chennai, Tamil Nadu 1-3 Yrs ₹2.5 - ₹04 Yearly Job Description A broad technical curiosity and proven technical understanding Excellent communication and interpersonal skills Bachelor’s Degree in Eletrical,Instumentation, Computer Engineering, or similar experience Familiar with Windows Platforms Familiar with SCADA and Products (Aveva Wonderware,Rockwell FactoryTalk View SE,Ignition,Siemens WinCC) Familiar with PLC & DCS programming and Products (AB,Siemens,Mitshubishi) Familiar with SQL databases (MS SQL Server) Experience with SQL languages and Reporting Tools Experience in Communication Protocols(Ethernet,Modbus,OPC) General networking experience (routers, switches, subnets, vlan, etc…)

About Us Statcon Electronics India Limited , an ISO 9001:2015 certified company, has been a trusted name in static energy conversion systems since 1986. We specialize in providing mission-critical solutions across Railways, Defence, Power, and Solar sectors. With deep expertise in AC and DC technologies, our products are designed for reliability and performance in harsh operating environments. We are proud partners of Siemens, L&T, GE, and many other global organizations. Position: Lead IoT Engineer We are looking for a dynamic and hands-on Lead IoT Engineer to join our R&D team at Statcon Electronics. This role focuses on developing and integrating IoT solutions for our next-generation power electronics and energy systems. The ideal candidate will have a strong foundation in IoT protocols, cloud integration, and edge device development, coupled with leadership potential and solid product deployment experience. ⚠️ Note : This is a core engineering role with leadership responsibilities — you are expected to contribute directly to development while mentoring others. Key Responsibilities: Lead the design, development, and deployment of IoT-enabled systems for power and energy management applications. Architect secure and scalable IoT solutions, including device firmware, cloud connectivity, and data management. Develop and integrate protocols like MQTT, CoAP, HTTP/REST, and Modbus for edge-to-cloud communication. Work with embedded and hardware teams to enable seamless device-level connectivity. Interface with cloud platforms such as AWS IoT Core, Azure IoT Hub, or similar for telemetry, control, and analytics. Ensure security best practices in IoT design, including authentication, encryption, and secure boot. Optimize power consumption, latency, and memory usage for resource-constrained devices. Manage over-the-air (OTA) firmware updates and remote diagnostics. Coordinate with cross-functional teams for field deployments, troubleshooting, and system validation. Mentor junior engineers and promote industry-standard development practices. Document technical designs, APIs, and protocols for maintainability and scalability. Stay updated with IoT trends, protocols, and emerging technologies relevant to industrial applications. Qualifications & Skills: B.Tech/B.E. in Electronics, Electrical, Computer Science, Instrumentation, or related field. 5 to 8 years of hands-on experience in IoT system design and deployment. Strong understanding of embedded systems , edge computing, and wireless communication protocols (BLE, Wi-Fi, LoRa, NB-IoT, etc.). Proficiency in Embedded C/C++ , Python, and Node.js for IoT devices. Experience with microcontroller platforms like ESP32, STM32, or TI CC-series. Familiarity with cloud integration tools and SDKs for AWS, Azure, or Google Cloud. Working knowledge of IoT security frameworks and secure firmware development. Hands-on experience with debugging tools, serial analyzers, and network sniffers. Version control proficiency (Git/GitHub), along with knowledge of CI/CD pipelines. Ability to lead, document clearly, and communicate effectively across teams. Experience in Industrial IoT (IIoT), energy monitoring, or power systems is a strong plus . What We Offer: A chance to lead real-world IoT deployments for mission-critical systems. Opportunity to work on end-to-end IoT product development , from device to cloud. Competitive salary with performance-based growth. A learning-focused culture that values experimentation and innovation. Statcon Electronics and Statcon Powtech are Equal Opportunity Employers and consider applicants for all positions without regard to race, color, religion or belief, age, marital status, military/veteran status, genetic information, sexual orientation, gender identity, physical or mental disability, or any other characteristic protected by applicable laws.

As a Senior Firmware Engineer at Atlas Copco, your main responsibility will be to be a part of a cross-functional team comprising electronics, software, and mechanical engineers, aimed at developing the next generation of cryogenic vacuum pumps and chillers. Your primary focus will be on firmware development, and you are expected to demonstrate a methodical and detailed approach in your work. Key responsibilities of this role include: - Participating in requirement gathering, software implementation, integration, and system testing. - Designing and developing multi-threaded Embedded applications for Vacuum Pumps and Compressors control. - Understanding the development and working principles of legacy products. - Developing test suites for validation and testing. - Maintaining and managing source code. - Collaborating with the team to deliver timely and accurate solutions. - Assisting in the development, maintenance, and execution of automated tests. - Participating in Agile ceremonies. To excel in this role, you should possess the following qualifications: - Minimum of 5 years of industry experience. - Proficiency in C++ with regards to Architecture, Coding Standards, etc. - Previous work experience in FreeRTOS configuration and system interfaces. - Project experience with C++ as the primary language for Application and Firmware Development. - Familiarity with hardware interfaces and protocols such as I2C, SPI, Ethernet, USB, UART, RS485. - Experience working in a multi-threaded environment with knowledge of IPC mechanisms. - Experience in porting applications across various RTOS is preferred. - Understanding of ARM Processors, multiple cores, and their capabilities. - Working knowledge of Embedded Communication protocols like CANOpen, Profinet, MQTT, Modbus, etc. - Familiarity with Python is a plus. - Understanding of uboot, interrupts, etc. - Ability to take ownership and work independently. - Positive attitude and willingness to explore new ideas and approaches. In return, we offer: - An opportunity to work with a leading global product company with a legacy of 150 years. - Empowerment to drive your professional journey through research and development. - A challenging role focused on developing new systems using advanced embedded technology. - Global exposure and opportunities for internal mobility. - Freedom and authority to act. - A caring culture that values diversity, inclusivity, and a sense of purpose and belonging. - Comprehensive total reward program covering insurances, higher education, and flexible work timing. If you are ready to be part of a team that values innovation, sustainability, and continuous improvement, we encourage you to apply before the deadline of 31-07-2025 in Pune. Join us on our journey for a better tomorrow at Atlas Copco.,

Role: PLC Automation Engineer Location: Remote (India) About the Role: We are looking for a seasoned PLC Automation Engineer Trainer with a proven track record in the industrial automation domain , particularly in high-volume manufacturing environments such as pharmaceuticals, medical devices, food processing, or automotive. The ideal candidate should have deep expertise in PLC programming , SCADA/HMI integration , and automated system troubleshooting across production lines. This role demands a strong foundation in Training Siemens, Allen-Bradley, or Mitsubishi PLC platforms , as well as practical exposure to field instrumentation, industrial networks , and regulatory frameworks like GMP and FDA 21 CFR Part 11 . Candidates should be highly skilled in delivering process reliability, safety compliance, and production efficiency. Key Responsibilities: Develop, modify, and optimize PLC code using platforms such as Siemens S7/TIA Portal , Allen-Bradley (RSLogix/Studio 5000) , or Mitsubishi GX Works . Perform root cause analysis and resolve faults in PLC-based control systems to minimize downtime. Integrate and configure SCADA/HMI systems (e.g., Wonderware, Ignition, FactoryTalk View) for real-time monitoring, alarms, and process visualization. Commission and validate new automation systems , including I/O mapping, FAT/SAT execution, and startup support. Ensure equipment safety compliance with internal and external standards, including LOTO, interlock validation, and electrical safety. Collaborate with cross-functional teams in maintenance, electrical engineering, process engineering, and operations to drive continuous improvement. Document and update system architecture, wiring diagrams, ladder logic, and change controls in compliance with GMP and validation requirements . Technical Background Required: Proficiency in PLC ladder logic, structured text, and function block programming . Advanced knowledge of industrial communication protocols such as Ethernet/IP , Modbus TCP/IP , Profibus , or DeviceNet . Hands-on experience in automated process equipment , sensors, actuators, and distributed control systems . Understanding of cGMP , 21 CFR Part 11 , and GAMP 5 principles in regulated environments (preferred but not mandatory). Exposure to change management systems , commissioning protocols , and risk assessment tools like FMEA or HAZOP. Qualifications: Bachelor’s degree in Electrical Engineering , Instrumentation Engineering , Control Systems , or a related field. Minimum 7–10 years of hands-on experience in PLC-based industrial automation, preferably in regulated industries. Strong documentation, troubleshooting, and cross-disciplinary coordination skills. Familiarity with validation documentation (URS, FAT, SAT, IQ) is an advantage. Excellent communication and problem-solving abilities with a focus on system reliability and safety.

The Remote Service Operations Engineer (RSOE) plays a crucial role as the primary contact for resolving issues at customers" energy storage sites. Your main responsibility will be to ensure the availability of assets by promptly managing incidents through responsive reactive maintenance and planned preventive infrastructure maintenance. As the Remote Service Operations Engineer at our Bangalore office on a 24/7 rotational shift, you will take ownership of large-scale energy storage sites. You will be the first point of contact for addressing all customer needs, responding to calls or alarms from the storage sites" alarm system, and determining necessary actions or consulting with technical experts within the Fluence organization. Your duties will include coordinating timely reactive and preventive maintenance activities, providing remote diagnostic and troubleshooting support, and upholding a safety-first culture during maintenance tasks. Additionally, you will maintain accurate records of site activities and generate detailed service reports in our service platform. To excel in this role, our ideal candidate should ideally have an undergraduate degree (BSEE, BSME, BSCE) or be a Licensed Electrician. You should possess experience in bi-directional inverters, HVAC, and 1000V/high current DC systems, with at least 2 years of relevant experience in electric utility or independent power producer settings. A proven track record in remote troubleshooting and the ability to adapt to changing conditions while remaining goal-oriented are essential. Strong interpersonal skills are crucial for effective communication with both external customers and internal team members. Proficiency in MS Office is required, and experience with SCADA and MODBUS would be advantageous. Familiarity with Linux operating systems, particularly Red Hat/Fedora, Ubuntu, or Debian, is beneficial, as is a fundamental understanding of Networking. The role may involve physical activities such as bending, stooping, climbing ladders, and lifting up to 40lbs. You should be comfortable working in a customer-focused environment that involves frequent phone interactions and be able to present yourself professionally over the phone. Additionally, you are expected to actively contribute to process improvements within our service organization, aiming to reduce costs, enhance response times, improve reliability, and elevate service quality. Your feedback on improvement areas to external teams, such as installation or engineering, will be valued and encouraged.,

You are a skilled Battery Management System (BMS) Engineer with a solid understanding of BMS architecture, components, and safety features. You have experience in failure analysis, problem-solving, and Li-Ion battery assembly, including cylindrical, pouch, and prismatic cells. Your expertise extends to LV and HV battery system handling. Your role involves developing and integrating new processes in the New Product Development Stage (NPDS). This includes design for assembly (DFA), design for safety (DFS), design verification analysis (DVA), ergonomics, and cable routing. You will be working on BMS architecture, focusing on SOC, SOH, cell balancing, fault detection, safety controls, and protection algorithms. A deep understanding of thermal management, energy management, and life optimization algorithms is essential for this role. Your experience with communication protocols such as RS485, Modbus, and CAN is crucial. You must be able to implement custom communication protocols provided by BMS manufacturers. Proficiency in preparing SOPs, work instructions, and quality checklists is required. Familiarity with battery chemistries like NMC and LiFePO4 and knowledge of their impact on BMS behavior are necessary. Knowledge of functional safety standards (e.g., ISO 26262) is considered a plus. You should also be capable of integrating BMS data into higher-level systems or dashboards for monitoring and control. Your responsibilities will include designing, developing, and testing embedded software and firmware for BMS applications. You will integrate and configure BMS hardware, including microcontrollers, sensors, and communication interfaces. Implementing state-of-charge (SOC), state-of-health (SOH), and cell balancing algorithms will be part of your tasks. Collaboration with hardware engineers, compliance with requirements, and developing diagnostic tools will also be crucial aspects of your role. Documenting software design, validation protocols, and change logs is also expected. Your qualifications should include a B Tech in ECE/EEE, and you should have at least 2 years of experience in battery management systems. The location for this position is Technopark, Thiruvananthapuram. Your skills should encompass various aspects related to BMS architecture, NPDS, thermal management, state-of-charge algorithms, and more as mentioned in the job description.,

Job description for Embedded Engineer at Vision Mechatronics Pvt. Ltd. Responsibilities: * To understand & firm up the Project Requirement/Spec Finalization Design, build, and test efficient, high-quality embedded code. * Ensure the robustness of the code. * Ensure the robustness and security of communication devices. * Ensure that the firmware is as protected and tamper-proof as the hardware platform can provide. * Collaborate on the design of future revisions of the product. Job Type: Full-time Benefits: Health insurance Schedule: Day shift Supplemental Pay: Performance bonus Education: Bachelor's (Required) Experience: 6 months to 1 year (Required) Work Location: In person Requirements Skills Required: * Qualification & Experience : BE/BTech(EXTC) / MSc (Electronics) / M. Tech (Embedded Systems) with 0-1 year experience in Firmware Development * Rich experience with understanding of 8 bit, 16 bit, 32 bit Micro * Strong knowledge of the C/C++ programming language in an embedded software context Experience with various peripheral protocols UART, I2C, SPI. * Experience of working with IEC / DLMS / MODBUS protocol will be handy. * Experience of working with version control system will be handy. * Experience with Energy Meters will be handy. Experience interfacing with Eprom, display, sensors etc. * Understanding of underlying electronics to the point where it influences firmware development and debugging * A knack for bench marking and optimization. - Ideal candidates will have excellent skills in collaborative problem solving. - Knowledge of Pic controllers. Benefits Benefits: Health insurance, Performance Bonus

Experience of PLC & SCADA programming Understanding of P&IDs and Control Systems Site Visit based on project requirement PLC Programming (Ladder, ST,FBD) Experience with Profibus, Modbus, CAN implementation SCADA Development(GUI Designing, Scripting, SCADA Database Configuration) Experience with Codesys, TIA Portal, Studio 5000 PLC softwares Experience with WinCC, Factorytalk SCADA/HMI Softwares Experience in PLCs & SCADA tools from ABB, Siemens, Rockwell, etc Understanding of Controls and automation invovled in plant process Experience in calibration of field sensors, drives, motors, pumps,etc Involvement in budgeting and procurement of project related resources Good analytical, integration and debugging skills are necessary Very Good oral and written communication and multitasking skills are expected

Job Description Job Summary: If you are a Systems & Instrumentation professional and looking for career opportunity, Emerson has an exciting offer to you! The MHM Lead Engineer will be part of core RS engineering team that performs project engineering, configurations, commissioning & solving of Emerson RS Systems Hardware & Software to protect and supervise variety of machine types encountered in the Oil & Gas, Power Generation, Petrochemicals, Pulp & Paper and other process industries. In this Role, Your Responsibilities Will Be: Shall be responsible for subject area design activities. Managing, supervising and reporting project budget, schedule of project scope. Should be able to handle a team size of 3 resources. Ensuring project engineering work are delivered as per project requirements with outstanding quality. Participate in Staging, Pre-FAT, FAT and i-FAT activities. Installation, Commissioning & trouble shooting of Emerson’s Reliability Solution systems and products. Software configuration activities pertaining to project requirements. Provide technical assistance internal and external collaborators. Proficient with project procurement activities (Interco - Buyouts) Strong ability to engage internal & external partners collaboratively to derive solutions for any projects/ assignment tasked. Participate or Conducts weekly / monthly reviews/ engagement with Key Stakeholders as well as internal partners for opportunities for improvements. Partakes in internal group key initiatives to drive continuous improvement. Who You Are: You quickly and decisively act in constantly evolving, unexpected situations. You adjust communication content and style to meet the needs of diverse partners. You always keep the end in sight; puts in extra effort to meet deadlines. You analyze multiple and diverse sources of information to define problems accurately before moving to solutions. You observe situational and group dynamics and select best-fit approach. For This Role, You Will Need: Minimum 6+ years of proven experience in the manufacturing environment and or systems engineering. Good level of understanding of communication protocols (OPC/Modbus) and field instrumentation. Good to Excellent level of understating of networking protocols Electronics and/or mechanical trouble shooting skills. “Hands-on approach” Available for travel domestic and international Proficiency in Microsoft Office applications such as Excel and Word. Has negotiation skills and ability to work with internal & external partner. Ability to lead change and alignment on new concepts and approaches through persistence, self-motivation, follow-through, and dedication. Great teammate who builds and maintains positive team member relations. Able to manage and schedule multiple priorities and meet deadlines. Possess strong analytical skills. Preferred Qualifications that Set You Apart: Degree experience or equivalent experience in Electronics, Instrumentation Engineering. Having CAT-I and above vibration certification will be advantageous. Knowledge on Lean Techniques, ISO 9002 Quality System and Inventory Management will be an added advantage. Having prior experience on Emerson or Baker Hughes (Bently Nevada) or Shinkawa or Meggitt Prediction and Protection systems Our Culture & Commitment to You At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives—because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing competitive benefits plans, a variety of medical insurance plans, Employee Assistance Program, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.

Job Summary JOB DESCRIPTION If you are an RTU, SCADA expert professional, Emerson has an exciting role for you! We are looking for a RTU, SCADA Service Engineer in Oil and Gas domain to work with our ETS Team. In this role you will work independently and as a part of a team to extend support on domestic or international sites for configuration, testing, engineering, commissioning, SAT etc. We value autonomy, self-reliance, fast movers, a passion for robust and maintainable tests, and above all, the ability to ship a quality product. In This Role, Your Responsibilities Will Be: RTU/SCADA precommisioning, Commissioning, SAT etc. Demonstrate high level of flexibility, commitment, and ownership. Short term Travel to onshore or offshore sites within India or other countries Contribute to the overall quality of the organization in the engineering space. Ensuring high performance on a variety of platforms. Creating standard procedures & documentation for repat use. Review Deliverables for Quality & Accuracy with Peers & Lead. Monitor Compliance to process/Targets Maintain QMS system for defects, rework & other indicators. Maintaining Cost, quality & schedule as per contractual terms For This Role, You Will Need: Minimum 3-5 years' experience in SCADA Engineering Experience with various RTUs and SCADA Experience of Emerson OE SCADA and ControlWave RTU is added advantage. Detailed hands-on experience on programming, Design, Application programming. Good hands-on Modbus, OPC and DNP3 communication Exposure to Radio and Wireless communication between RTU’s and Host Systems like SCADA Experience in Server Installation, Windows Administration, and networking. Field Instrumentation knowledge for Flow meters, pressure & temperature transmitters, control valves etc. FAT and SAT experience of SCADA with domestic and international clients Customer/vendor/Factory Liaison to fulfill documentation and inspection requirements. Coordinate Tests/Inspections of all bought out/fabricated items. Computer skills in Windows, Outlook, MS Word, Adobe Acrobat and Excel. Preferred Qualifications that Set You Apart: Degree in Instrumentation & Control / Electrical / Electronics Engineering Basic understanding of networking protocols and concepts Capable of describing and documenting for overall Project strategy Contribute to and help maintain the engineering team Excellent written and verbal communication skills Innovative mind set. Thrive for Results Being Organizationally Savvy Interpersonal Savvy Business Ethics & Integrity

Job Description In This Role, Your Responsibilities Will Be: Analyse customer inputs and understand requirements such as Design Specifications, IO list, Instrument Index, MCC drawings, HW loop typicals etc. Follow Emerson’ FSM process and maintain all SIS related documentation of the assigned activities as per safety lifecycle requirement Verify compliance to IEC61511/other as per assigned scope in project Raise Technical Queries Develop System Architecture Develop System Interconnection diagram Develop Heat Power, Weight Calculation Perform I/O to Controller Assignment Define Hardware Concepts Define third party interfaces (Modbus, Profibus, OPC etc.) Develop/Review BOM for DCS & SIS Design/review HW typicals Design/review HW drawings for various cabinet such as Network, Server, System, Marshalling, Power Distribution, Interposing relay etc. Design/review Furniture Console, Matrix panel for ESD & FGS Select third party components such as relays, barriers, Fibre Optic Patch Panels, Review third party devices and verify/test compatibility with system Monitor/Review Cabinet build Develop Internal test plan Perform Internal testing Perform Third Party Interface test Develop HW FAT plan Develop HW-SW Integration plan Perform Integrated testing between SW & HW Perform FAT with customer Develop As Built documentation Develop SAT plan Perform SAT at customer location Loop checks at site Startup & Commissioning support Quality Control & Assurance Implementation of EEEC IMS processes/documentation as & when required throughout the project. Adopts to WA quality requirements and Customer’s regulatory guidelines Practices and promotes First time right approach. Strictly follows GDP (Good Documentation Practices). Other Duties Perform other additional specific duties, when requested by the business. These will, typically, be strategic in nature but could potentially be anything that the post holder is suitably qualified and experienced to undertake. These duties may be assigned to the person under guidance of a supervisor. Who You Are: You promote high visibility of shared contributions to goals. You quickly and significantly take action in constantly evolving, unexpected situations. You actively seek guidance from pertinent sources to make timely and well-informed decisions. You handle the risk that comes with moving forward when the outcome is not certain. For This Role, You Will Need: 5 years of relevant work experience in the field of process control and automation. DCS/SIS HW Design experience in Engineering Industry is desired. Preferred Qualifications that Set You Apart: Must be a bachelor graduate in Instrumentation, Electronics, Electronics & Telecommunication. Our Offer to You: By joining Emerson, you will be given the opportunity to make a difference through the work you do. Emerson's compensation and benefits programs are designed to be competitive within the industry and local labor markets . We also offer a comprehensive medical and insurance coverage to meet the needs of our employees. We are committed to creating a global workplace that supports diversity, equity and embraces inclusion . We welcome foreign nationals to join us through our Work Authorization Sponsorship . We attract, develop, and retain exceptional people in an inclusive environment, where all employees can reach their greatest potential . We are dedicated to the ongoing development of our employees because we know that it is critical to our success as a global company. We have established our Remote Work Policy for eligible roles to promote Work-Life Balance through a hybrid work set up where our team members can take advantage of working both from home and at the office. Safety is paramount to us, and we are relentless in our pursuit to provide a Safe Working Environment across our global network and facilities. Through our benefits, development opportunities, and an inclusive and safe work environment, we aim to create an organization our people are proud to represent.

Location: Bengaluru, Karnataka, India Job ID: R0065203 Date Posted: 2024-11-27 Company Name: HITACHI ENERGY INDIA LIMITED Profession (Job Category): Engineering & Science Job Schedule: Full time Remote: No Job Description: Mission Statement: Project Engineering focuses on designing, communicating, and implementing an operational plan for completing an engineering-based project including: repairing designs, project controls and specifications, schedules, cost estimates, production, transportation, installation, testing and/or commissioning of new infrastructure, facilities, equipment, etc. Monitoring progress and performance against the project plan; taking action to resolve operational problems and minimize delays. Identifying, developing, and gathering the resources necessary to complete the project. May include preparing engineering standards, designs and work specifications; developing project schedules, budgets and forecasts; and selecting materials, equipment, project staff, and external contractors A Senior Professional (P3) applies advanced knowledge of job area typically obtained through advanced education and work experience. Responsibilities may include: Managing projects / processes, working independently with limited supervision. Coaching and reviewing the work of lower level professionals. Problems faced are difficult and sometimes complex. Your responsibilities: Create Base Design with all necessary Concepts. Verify the implemented Base Design in the Detail Design (Bay and Station level Engineering). Technical Coordination and Lead for the project team during the project execution phase (Detail Design, Manufacturing, Testing Commissioning). Technical co-ordination for FAT. Responsible to ensure that specification is fulfilled in respect of the technical offer. Contribute to the improvement of the Net-margin including upsales, etc. Ensure project execution is carried out fulfilling internal processes and guidelines. Ensure experience and learnings during the project execution is shared with colleagues within the same unit (Sales, B&P, PMs, Engineering, Testing, Commissioning). Project execution for complex projects (E.g. Retrofit, Fast Track Projects, Turn Key Projects, etc.) Contribute to identify market compliant, low risk technical solution and efficient project setup (E.g. Organization, Communication, Sub-supplier). Should have knowledge on Generator, Line, Transformer, Busbar protection relays and Bay control units Should have worked on IEDs configuration tools like PCM600, DIGSI, Agile studio, Easergy Studio, etc., Should have worked on MicroSCADA for SAS & DMS, Gateway and Remote HMI applications etc., Work experience on 800xA for HMI, Load shedding, Generator shedding application etc., will be added advantage Should have working knowledge of Protocols such as IEC61850, Modbus, IEC-104, IEC-101, DLMS etc., Should have working knowledge on Cyber Security for designing Substation Automation/Network control centers. Living Hitachi Energy’s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Your background: BE/B.Tech - Electrical or Electronics Engg. with 8 – 12 years of relevant experience. Proficiency in both spoken & written English language is required. Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process. This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.

Job Title: Project Engineer Skills: Experience with Mitsubishi(iQR) and FX Series Must have a prior experience in controller logic development and SCADA screen development on project with more than 500 inputs and Outputs in ICS/ Distributed system and learning mindset to develop technical expertise as required for the project . Should have worked with System integrator (SI) company in the past and have prior Experience in execution of Pre-FAT, FAT, SAT for the projects and be capable of supporting multiple projects as per the overall execution plan of the projects. Good command on Network architecture/implementation. Hands on experience in implementing protocols (Modbus -Serial RTU/ TCP/IP, OPC DA/ UA, IEC 104).Any additional communication protocol experience is add on. Should have commanding expertise in Controller selection, PLC Logic development(FB/Ladder/ SFC), SCADA application development. Experience: 2 to 5yrs call & msg- 9690729016 Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹30,000.00 per month Schedule: Day shift Work Location: In person

We are looking for a pro-active experienced Engineer who will be part of the Project Team in Design Engineering, Installation, Integration &Commissioning of Sub Station Automation Projects / Systems. TheEngineer will have to travel to Customer Sites for collection of information, Site Installations, Integration & Commissioning of Systems. Experience : Minimum 2+ Years Experience in Similar Field Technical Skills : Proficiency in Sub Station Automation, Experience in configuration/integration of Numerical Relays from Siemens / ABB/Schneider/ Alstom/GE / etc. Familiarity in working with AutomationProtocols - IEC 61850/ DNP 3.0/ Modbus & SCADA systems. Knowledge ofCommunication in Fibre Optic / GSM/GPRS/ RF 7. Tasks & Responsibilities : 1. Design of Sub Station Automation System & Engineering 2. Provide Support in Installation & Integration of Systems 3. Provide Support in Testing & Commissioning of Sub Station automation Job Type: Full-time Pay: ₹250,000.00 - ₹500,000.00 per year Benefits: Health insurance Schedule: Morning shift Work Location: In person Expected Start Date: 01/08/2025

Responsibilities: Support the Sales Team with on-site customer visits to resolve product and application-related issues. Provide hands-on product demonstrations and simulations for customer applications. Develop lab and test equipment for simulation of customer’s applications and performing product warranty evaluation. Respond to customer queries via phone, email or in-person interactions. Travel across India to support our growing customer base. Qualification: Engineering degree in Electronics, Electrical, Instrumentation, Mechatronics or related fields. 3+ years of experience in an industrial environment preferred. Hands-on experience with: PLC programming and interfacing of field devices, Vision Sensors, Vibration testing equipment, and lab test equipment. Experience of working with various industrial protocols like Ethernet IP, Profinet, Modbus TCP, Ethercat. Installation and integration of IO-Link devices and Software. Strong Analytical and problem-solving skills. Excellent communication skills to provide customers with value-added support that makes the team at ifm unique in the sensor business. Strong computer skills, including proficiency in Windows, with experience in ERP/CRM systems preferred. Demonstrated ability to work effectively in a team environment and work independently, managing multiple priorities. Why join ifm? Comprehensive onboarding and continuous technical training (including at our corporate HQ in Kolhapur) Exposure to cutting–edge automation technologies Opportunity to work closely with industry leaders across India

Protocol -SPI, UART, I2C CAN, Modbus, Profibus, or Foundation Fieldbus Microcontroller Platforms -SP430, PIC32, IMX, and STM32 real-time applications - RTOS Bootloader and low-level driver development IDE's -IAR, Keil, MPLAB, or Code Composer Studio

Role Overview: You will contribute to the development, integration, and testing of embedded software for automotive hardware platforms and our Edge AI product, together with a globally distributed team . This includes writing firmware, interacting with peripherals, and validating features across multiple projects. Responsibilities Develop automotive embedded applications using C for real-time systems Interface with MCU (Infineon) peripherals over SPI , I2C , UART , GPIO Develop embedded Linux applications for our Edge AI product with Modbus, OPC/UA etc. Bring up new hardware and support early board validation Debug hardware/software issues with test tools Maintain clean, modular code and contribute to internal documentation Work closely with testers and hardware teams to meet functional goals Required Skills 0–2 years of experience in embedded development Proficiency in C Familiarity with any microcontroller families (e.g., STM32, NXP, Infineon) Basic understanding of digital electronics and peripheral configuration Nice to have Exposure to real-time systems or bare-metal firmware Exposure to linux based development environment Familiarity with debugging interfaces (JTAG, SWD) Ability to read and understand schematics and datasheets Experience with version control systems (e.g., Git) Familiarity with communication interfaces like Modbus, CAN Others Even if you don’t meet all the listed qualifications, but believe you can contribute to PuNord in embedded software and edge ML/AI, we encourage you to reach out.