2779 Modbus Jobs - Page 12

Role Overview We are looking for an experienced embedded systems engineer to lead firmware development for energy-focused hardware systems. The role involves implementing low-level control logic, managing communication protocols, and ensuring system reliability in constrained environments. You’ll be working closely with a small cross-functional team across hardware, firmware, and backend to develop robust, real-time edge behaviors for field-deployed devices. Responsibilities • Develop and maintain embedded firmware on microcontrollers (e.g. STM32, ESP32, etc.) • Integrate serial communication protocols (UART, RS485, Modbus RTU/TCP) • Design and implement RTOS-based control flows for edge-lev...

Job Description GEC, Noida Position: Hardware Engineer Position Requirements Pentair is currently seeking a Hardware Engineer in Global Engineering Center, Noida in India team. This role is responsible for Hardware design and testing for various Pentair products, used for Industrial and commercial market. This individual must be wellversed in the latest technologies in Electronics design, Sensor and IoT products and be capable of applying them to develop innovative solutions. Duties & Responsibilities Defining Industrial/ commercial connectivity technologies Roadmap for System design. Define Modular approach for system assemblies – Power, Display, Controller, VFD, Sensors, Connectivity techn...

Post- Automation Engineer Requirement. Diploma/Btech with Min 3 Year of exp on Schneider PLC SCADA. Good English communication skills JD Automation Engineer The candidate shall be placed in Noida office and as and when required he shall be visiting for inspection and site commissioning. To prepare all PLC logic (Schneider M200, M340 and M580 Series) PLC as per control philosophy of Hydro Turbine. To prepare SCADA screen in line with GH guidelines and previous executed project. To make the communication between PLC to different equipment over Modbus or TCPIP. To test data acquisition from relay, temperature scanner, meters to PLC/SCADA. To communicate GPS clock (NTP) with different equipment/...

Overview We are seeking a detail-oriented and dynamic professional to join our team as a Solution Architect . In this role, you will be responsible for developing control system solutions, designing system architectures, and preparing cost estimates for industrial automation projects. You will play a critical role in translating customer requirements into reliable, cost-effective technical solutions, supporting clients across global markets. Key Responsibilities Develop optimum solutions based on customer RFQs/tender documents, including BOQs and cost estimates. Design system architecture and BOM using relevant architecture development tools. Conduct detailed assessments to analyze customer ...

In this role, your responsibilities will include working on Embedded Firmware projects as a member of the Engineering & Design team for new product development, quality improvement, and sustaining engineering. You will collaborate with Lead Engineers and Technical Leads to perform project design and firmware development activities. It will be essential to report and communicate project progress to stakeholders periodically. Additionally, you will coordinate Firmware/software development activities with stakeholders globally and interact with other design team members to meet and optimize product design requirements. You are someone who thrives on new opportunities and tough challenges with a...

Selected Intern's Day-to-day Responsibilities Include Develop STM32 firmware in C/C++ (bare-metal/RTOS) using STM32CubeIDE/KEIL. Write peripheral drivers (UART, SPI, I2C, CAN) for STM32. Drive TMC2660,TMC2209,TMC5160 Based Motors using CAN and Write Motor Side Code, also Write Sync Code For The Same Debug embedded systems using JTAG, oscilloscopes, and logic analyzers. Implement cross-platform communication between STM32 and Linux (UART, USB, Ethernet). Optimize system performance and power efficiency on both STM32 and Linux. Develop system daemons/services in C/C++/Python for Linux embedded. Integrate sensors/actuators with STM32 and Linux. Apply industrial protocols (Modbus, CANopen) as ne...

Job Description Job Description Job Summary This job involves DCS/SCADA and PPC engineering for Solar and BESS Projects and shall involve customer meetings, design concept, engineering/implementation, and process simulation & testing and commissioning based upon customer requirements. If you think this role suits you, join our team and apply now! In This Role, Your Responsibilities Will Be You will be responsible for the complete Project Cycle, starting from inputs analysis, Design & Engineering, Testing& Factory Acceptance Test (FAT) followed by commissioning as per requirement. Implement DCS and SCADA based Solar/BESS greenfield and retrofit projects, Software and hardware engineering and ...

You should have a minimum of 4+ years of experience in embedded C & C++ development. It is essential to possess good knowledge and practical experience in working with Real-Time Operating Systems (RTOS) such as Free RTOS or Zephyr RTOS. You should also have exposure to and be familiar with debugging code in an RTOS-based environment. Additionally, it is crucial to have a strong background in working with RTOS-based Micro-Controllers and be well-versed in various communication protocols like Modbus, Ethernet, BACnet, and REST in embedded systems. Proficiency in Bluetooth Low Energy (BLE), BLE Mesh, and BLE GATT server is a must. Experience with microcontrollers such as STM32, Nordic, and ESP3...

You will be responsible for leading the design, implementation, and deployment of enterprise-grade IoT solutions across diverse environments. This includes defining architecture and system integration strategy for IoT deployments, managing end-to-end IoT infrastructure, and collaborating with various teams to ensure cohesive and secure implementations. Your role will involve driving standardization of best practices, leading field rollouts and large-scale implementations, as well as developing and maintaining documentation and configuration guides. Additionally, you will provide technical mentorship to junior engineers, conduct code/device reviews, and continuously evaluate and implement new...

Job Description Job Summary: This job involves DCS/SCADA and PPC engineering for Solar and BESS Projects and shall involve customer meetings, design concept, engineering/implementation, and process simulation & testing and commissioning based upon customer requirements. If you think this role suits you, join our team and apply now! In This Role, Your Responsibilities Will Be: You will be responsible for the complete Project Cycle, starting from inputs analysis, Design & Engineering, Testing& Factory Acceptance Test (FAT) followed by commissioning as per requirement. Implement DCS and SCADA based Solar/BESS greenfield and retrofit projects, Software and hardware engineering and configuration....

Responsibilities Experience in software product development and designing scalable enterprise applications Experience in .NET9, C#, REST API, Design Pattern Exp and OAuth Excellent knowledge in Micro Service frameworks, Kubernetes and Docker containers. Excellent knowledge in Database design and writing SQL queries, Stored Procs etc. (Mongo DB, PostgreSQL) Working knowledge of JavaScript frameworks like ReactJS Working knowledge of unit test framework like XUnit, NUnit, Test Driven Development (TDD) At least 3+ years of experience developing cloud applications (Preferably Microsoft Azure functions, Event Hubs, IoT Hub, Service Bus, Event Grid etc.) Knowledge of agile software development. St...

Job Title: Embedded Firmware - Consultant Location: Teknovate Enterprise Solutions Pvt Ltd, Bangalore About the Role We are seeking an experienced Embedded Firmware Consultant to lead the architecture, design, and optimization of firmware for Teknovates IoT and embedded products. The role requires deep technical expertise in real-time embedded systems , protocol integration , and system-level performance tuning , along with strong leadership to mentor teams and ensure reliable, scalable, and secure solutions. Key Responsibilities Lead end-to-end firmware development from design, coding, integration, and testing to deployment. Architect and implement RTOS-based scheduling, multitasking, and i...

To extend Product support for Mitsubishi factory Automation products, Industrial Vision Systems, AGVs/AMRs Offline Software devp & simulation

1.Design, program, & commission PLC systems. - Integrate PLCs with industrial robots (ABB / Fanuc). 2.Strong knowledge of Siemens, Mitsubishi, & Delta PLCs. - Experience in robot integration with PLCs. 3. support during installation & commissioning. Required Candidate profile 4. Experienced PLC Programmer to develop, implement, and maintain PLC programs for automation systems and robot integration. 5.Familiarity with (PROFINET, Modbus, Ether CAT).

Job Title- Specialist – SCADA & Networking Location: Chennai, India (On-site, Global Shared Service Centre) Department: Digitalization HUB We are looking for immediate joiners from Chennai to join as a Specialist – SCADA & Networking. This is an on-site role supporting global wind farm operations and ensuring 24/7 business continuity. Key Responsibilities: Coordinate & maintain network components (VPNs, Firewalls, Routers, Switches) Troubleshoot SCADA, agents, and communication systems (remote & on-site) Manage incidents & tickets end-to-end Support IT/OT changes & cybersecurity compliance Maintain system updates, patches & documentation Desired Skillsets: 2–4 years of experience in SCADA & ...

We're Hiring | RF Testing Engineer Location: Jaipur | Experience: 2 to 10 Years | Education: BE/B.Tech | Work Mode: Work from Office Are you passionate about technology, energy, and driving business growth? Join Genus Power Infrastructures Ltd. , a leader in smart energy products and Software & Solutions innovations, as we expand our cutting-edge software and solution portfolio in the smart metering space. Role Objective We're looking for a dynamic, entrepreneurial RF Testing Engineer to drive growth for our Smart Metering RF Testing. RF Testing Engineer is responsible to Validate RF and GPRS communication devices as per given test plan Key Responsibilities RF parameter testing. ipv4/ipv6 pr...

The Opportunity As a Cybersecurity Engineer in Hitachi Energy, we are looking for a skilled and motivated engineer to join our team of R&D Engineers. A person interested in the field of Penetration testing, vulnerability analysis, security risk management, identification and mitigation, SQL injection, cryptography Encryption Standards and Products and contribute towards global R&D projects. How You’ll Make An Impact You will help with implementation of cybersecurity tools, running them and analyzing the results and ensure compliance of the solution as per internal cybersecurity standards for base solutions. You will be a part of the development of the FACTS Cybersecurity team and will focus ...

Position Overview: We are seeking a Senior Technical Architect Embedded Systems to join our team in Pune. This role requires a strong technical foundation in embedded system design and development, coupled with the ability to define system-level architectures and guide engineering teams. The ideal candidate will bring a strategic mindset, hands-on expertise, and a collaborative approach to delivering scalable, reliable, and high-performance embedded solutions. ________________________________________ Key Responsibilities: Define and lead the embedded architecture design for new products, ensuring scalability, reliability, and alignment with business goals. Collaborate with cross-functional t...

Responsibilities Experience in software product development and designing scalable enterprise applications Experience in .NET9, C#, REST API, Design Pattern Exp and OAuth Excellent knowledge in Micro Service frameworks, Kubernetes and Docker containers. Excellent knowledge in Database design and writing SQL queries, Stored Procs etc. (Mongo DB, PostgreSQL) Working knowledge of JavaScript frameworks like ReactJS Working knowledge of unit test framework like XUnit, NUnit, Test Driven Development (TDD) At least 3+ years of experience developing cloud applications (Preferably Microsoft Azure functions, Event Hubs, IoT Hub, Service Bus, Event Grid etc.) Knowledge of agile software development. St...

🔹 Job Title: Sales Engineer – Industrial Automation 📍 Location: Gurgaon 🏢 Company: [Confidential / Schneider Electric Channel Partner] 🕒 Experience: 3–5 Years 💰 Salary: ₹6–7 LPA 🏭 Industry Focus: Industrial Automation Solutions – PLCs, HMIs, SCADA, VFDs, Sensors, and related control products. 🧾 Job Description: We are seeking a dynamic and results-driven Sales Engineer with 3–5 years of experience in the industrial automation domain. The ideal candidate will have a solid technical background and proven experience in selling automation solutions, preferably including Schneider Electric products. Experience in providing automation solutions to industries such as winch manufacturing, material h...

What will you do? Understanding project requirements and completing all duties assigned by the Supervisor. Participating in meetings and attending workshops and other training initiatives Should design, implement, and test a wide range of I/O (HART, Modbus, FF, Profibus etc.), basic control functions, interlocks, sequences, operator interface and other control components on DCS and PLC. Documenting the project control and safety functions, presenting them to the customer and get approval. Preparing simulations, test scenarios, test documentation, and participates in customer Factory Acceptance Tests. Actively participates in project meetings, discussion with customers, visiting sites and sup...

About the Role : We are seeking a highly skilled Embedded Systems Engineer to design and develop the powertrain and integration of VCU and ECU with good exposure to embedded software and hardware solutions.The ideal candidate has hands-on experience with microcontrollers, real-time operating systems (RTOS), powertrain, hardware interfaces, and embedded programming in C/C++. Responsibilities : Design and develop software for integrating powertrain components and microcontrollers into the overall control of the Product. Strong knowledge of resource SOCS embedded limit platform. Collaborate with hardware engineers to define system architecture and hardware/software interfaces. Implement drivers...

Roles & Responsibilities System Design & Integration Architect embedded control systems for robotics and automation platforms Integrate servo motors, sensors, actuators, and drive systems into cohesive units Firmware & Software Development Develop and optimize embedded firmware (C/C++/Python) for real-time control Implement communication protocols (CAN, SPI, I2C, UART, Modbus) Drive & Motion Control Design and tune motor control algorithms (PID, FOC, sensor less control) Configure and troubleshoot VFDs, servo drives, and stepper motor controllers Testing & Validation Conduct system-level testing, debugging, and performance validation Use oscilloscopes, logic analyzers, and simulation tools f...

Job Summary: We are looking for a highly skilled and motivated Robotics Engineer to design, develop, test, and implement robotic systems and solutions that advance automation and innovation. The ideal candidate will have strong experience in hardware and software integration, control systems, and machine learning to contribute to high-impact projects across industrial, consumer, or research domains. Key Responsibilities: Design and develop robotic systems and components including mechanical structure, sensors, actuators, and controllers Program, simulate, and test robots using platforms like ROS, MATLAB, or C++/Python Develop and implement control algorithms for path planning, object recogni...

Validation & Verification Engineer will be responsible for planning, executing, and overseeing the validation and verification processes for products. This role ensures that all products meet industry standards, regulatory requirements, and customer expectations. Key Responsibilities: Validation & Verification Activities: Develop and implement V&V plans, test protocols, and test cases for new and existing products. Execute functional, performance, environmental, and reliability testing on instruments. Analyze test results, identify deviations, and collaborate with design teams to resolve issues. Document test reports and ensure traceability of requirements to test cases. Work on software and...