1125 Milling Jobs - Page 17

Job Title: 3-Axis Milling Programmer, Setter & Operator Location: Department: Manufacturing / CNC Machining Reports To: Production Manager / Shop Supervisor Job Summary: We are seeking a skilled and experienced 3-Axis Milling Programmer who can independently program, set up, and operate CNC milling machines to produce precision components as per engineering drawings and specifications. The ideal candidate should have a strong understanding of G-code programming, tooling, fixturing, and machining practices, with a hands-on approach to problem-solving and quality control. Key Responsibilities: Create and optimize CNC programs for 3-axis milling machines using CAM software (e.g., Mastercam, Fusion 360, etc.) or manual G-code when required. Interpret technical drawings, models, and specifications to determine machining operations, tooling, and sequences. Set up machines by installing and adjusting fixtures, tools, and workpieces. Operate 3-axis CNC milling machines to perform precision machining tasks. Monitor machining operations and adjust speeds, feeds, and tool paths as necessary to ensure accuracy and productivity. Perform in-process inspections using measuring instruments such as micrometers, calipers, height gauges, and CMMs where required. Ensure quality and dimensional accuracy of machined components. Maintain equipment by completing preventive maintenance requirements and troubleshooting issues. Collaborate with production planners, engineers, and quality inspectors to ensure efficient workflow and continuous improvement. Maintain a clean and organized work area, adhering to all safety standards and company procedures. Required Skills & Qualifications: ITI / Diploma / B.Tech in Mechanical or relevant discipline. Minimum 5-10 years of hands-on experience in CNC programming, setting, and operating 3-axis milling machines. Proficiency in G-code programming and CAM software. Strong knowledge of machining practices, cutting tools, and materials (aluminum, steel, superalloys, etc.). Ability to read and interpret mechanical drawings and GD&T. Good understanding of tolerances, surface finish, and machining sequence planning. Familiarity with quality control procedures and measuring tools. Self-driven, detail-oriented, and capable of working independently with minimal supervision. Preferred: Experience in aerospace, automotive, or precision engineering industries. Familiarity with Fanuc, Siemens, or Heidenhain controls. Job Type: Full-time Pay: ₹25,000.00 - ₹40,000.00 per month Benefits: Life insurance Provident Fund Supplemental Pay: Overtime pay Work Location: In person

Description Enphase Energy is a global energy technology company and leading provider of solar, battery, and electric vehicle charging products. Founded in 2006, Enphase transformed the solar industry with our revolutionary microinverter technology, which turns sunlight into a safe, reliable, resilient, and scalable source of energy to power our lives. Today, the Enphase Energy System helps people make, use, save, and sell their own power. Enphase is also one of the fastest growing and innovative clean energy companies in the world, with approximately 80 million products installed across more than 160 countries. We are building teams that are designing, developing, and manufacturing next-generation energy technologies and our work environment is fast-paced, fun and full of exciting new projects. If you are passionate about advancing a more sustainable future, this is the perfect time to join Enphase! About the role: As a Staff Mechanical Engineer, you will be applying your in-depth knowledge and experience in electro-mechanical product development to the detail design and development of products that use polymers, metals and rubbers and which closely interface with PCBs and high-power electrical components. You will be working closely with team members across our global development team, so your spoken and written communication needs to be clear and effective in order to be able to present your ideas, your concepts and your feedback. You will be problem-solving on new product development, identifying and resolving root causes of field failures and implementing effective cost reduction opportunities. What you will do: Designing (70%) & testing (30%) of new components and products, sometimes as sole contributor but often as part of a team of contributors. Manage assigned mechanical design projects, adhering to project timelines, budget constraints, and quality standards. Perform day-to-day CAD (3D & 2D) activities and documentation. Conduct periodic design review with mechanical teams & cross functional teams. Reviewing and analyzing solutions to achieve the best outcome for performance/cost/schedule Product testing (DVT) & Testing proof-of-concepts and prototypes for performance Failure analysis and root cause identification Component review and approval, including global travel to be on-site at vendors during pre- production stage. Generating own (and reviewing others’) documentation, including concept proposals, analysis reports, component specifications, review minutes Ensure quality by design. Product testing (DVT) & Testing proof-of-concepts and prototypes for performance Design and execute comprehensive test plans (Inhouse and external lab) to verify mechanical performance against design specifications, including static and dynamic loading, fatigue testing, environmental testing, and reliability testing. Analyze test data, identify potential issues, and implement design improvements to address any deficiencies. Who you are and what you bring: Bachelor's Degree (or higher qualification) in Mechanical Engineering 12+ years (with BE / BS) or 8+ years (with Masters) of industry work experience in product design & development. Hands-on experience in Designing electromechanical products Good exposure on UL/IEC and related standards. Experience on UL1741, IL9540, UL 9540A will be an added advantage Experience in testing below international standards is desirable (but not limited to). Inverters UL 1741, Electrical connectors UL 6703, UL 9703, EN 60512, EN 60352; Polymers UL 94, UL 746C. Ingress protection IEC 60529/IPXX/NEMA Enclosure standards Hands on is preparing mechanical mock-ups, Prototypes, Electro-mechanical assemblies, Cable Good Exposure on plastics, Sheetmetal, casting part design and manufacturing process Good understanding on cable assemblies, ECAD/MCAD integrations Good exposure on structural and thermal design considerations Good Exposure on DFX for high volume production Good exposure on prototype techniques for Design development and verification Expertise in SolidWorks and EPDM. Knowledge on any other CAD packages will be an added advantage. Exposure on CAE tools is an added advantage. In-depth knowledge and understanding of Design for Manufacture (DFM) of parts made through injection moulding, sheet metal, stamping, milling/turning Experience using Computer-Aided development tools (SolidWorks) Clear communication - verbal and written Experience in the design and sustaining activities on high-volume products (+500k pa) would be a plus and also previous employment in high-power and consumer products industries would be a plus.

Job Description BluEnt India is looking for Shop Drawing and Millwork Engineers experienced with modelling, detailing, drafting of fabrication drawings and manufacturing drawings of casework, cabinets, furniture, fixtures and interior fit outs for bars, hotel lobby interiors, stores, clinic receptions, and high-end residences. Project work includes modelling, designing with exact engineering details from architectural files (input) into accurate SolidWorks models and AutoCAD drawing sets (output) . Requirements: Wood cabinetry (Millwork) and Metal product design, development, reverse engineering and manufacturing experience Preparing AutoCAD Fabrication drawings and shop floor drawings for Furniture & Retail Fixtures and interior fit outs. Knowledge of MDF, Plywoods, Blockboards, Chipboards, OSB etc with their working on Beam Saw, Panel Saw, CNC Modeler, CNC Routers and edge banding machines. Knowledge of tube cutting, TIG welding, Milling, drilling, lathe work, tapping, and metal fabrication processes. Well versed with materials and finishes i.e. wood, laminates, metals, plastics, fabric etc. Good communication skills to handle international projects and clients is a plus Knowledge of Engineering and mill-work design and drafting standards (from millwork or other associations Key Responsibilities: Millwork Drafting and Shop Drawings Red-lines and Revisions Parametric Modelling Photorealistic 3d Modelling Millwork Engineering Parametric Library and family Creation Prototype Sample Development Customized Assembly Costing and Material Suspension (wood and metal) Our Projects Kitchens Hospitals Hotels Lab Schools Restaurants Commercial Clinics Casinos Offices Residences Job Type: Full-time Pay: ₹300,000.00 - ₹700,000.00 per year Benefits: Health insurance Schedule: Monday to Friday Work Location: In person

Role: VMC Mechine Operator VR Manpower Solutions-COIMBATORE Job Types: Full-time, Permanenter Free accommodation subsidy food provider Location- Coimbatore, Tamil Nadu Qualification ITI Diploma BE mechanical Salary: ₹18,000.00 - ₹35,000.00 per month JOB PROFILE SETTING,PROGRAMING,OPERATING MACHINE INDIVIDUALLY o Operating Milling machine o Tool/work offset setting o Offset corrections o Program corrections Job Types: Full-time, Permanent, Fresher Pay: ₹18,086.00 - ₹28,982.56 per month Benefits: Food provided Schedule: Day shift Rotational shift Supplemental Pay: Overtime pay Shift availability: Day Shift (Preferred) Night Shift (Preferred) Overnight Shift (Preferred) Work Location: In person

Job title - VMC Programmer, Operetor (VMC 3,4,5 axis) Educational qualification - Diploma (Mech, Auto, Mechatronics) / ITI (Any degree) / BE Experience - 5+ years experience Job location - Porur, Alapakkam Opening position - 2 Nos (On roll) CAM Programming (3,4 & 5 Axes using Master CAM software is must) Knowledge on Fanuc Controller Prove-out the FA in CNC Machines. Knowledge on GD&T. Experience in Tool selection and Special tool design. Knowledge on Cutting tools. Knowledge on standard clamping Elements. Knowledge on CNC Milling & Turning machines. Knowledge on PPAP( PFMEA,CP & PFD etc). Rout cause analysis & Corrective action. Continual improvement. AS9100 awareness. Duty Hour: 08:30am to 05:30PM (Day Shift Only). Food & Accommodation: Free. Interested Candidates bring your following documents through the below mentioned Venue. 1. Updated Resume, 2.10th, 12th & Diploma or Degree Consolidated Mark Sheet. 3. Updated Aadhar Card, 4. Experience Certificate. 5. Latest Pay slip for last 3 months. Job Types: Full-time, Permanent, Freelance Pay: ₹20,000.00 - ₹40,000.00 per month Benefits: Flexible schedule Food provided Health insurance Life insurance Provident Fund Schedule: Day shift Supplemental Pay: Performance bonus Yearly bonus Experience: CNC programming: 3 years (Required) Location: Porur, Chennai, Tamil Nadu (Preferred) Shift availability: Day Shift (Required) Work Location: In person

Position :CNC Machine operator Experience: 0–2 years Qualification: ITI Diploma – Fitter / Machinist / Tool & Die / Mechanical Industry: Manufacturing / Engineering / Automotive / Aerospace Key Responsibilities: Operate CNC machines (Turning, Milling, or Grinding) as per production requirements Interpret and understand engineering drawings, specifications, and job orders Perform basic machine setup and tool changes Monitor machining operations and make necessary adjustments Conduct regular quality checks using measuring instruments (Vernier, Micrometer, etc.) Ensure machines are cleaned and maintained regularly Follow all safety protocols and report any issues to the supervisor Key Skills: CNC Machine Operation Machine Setup & Tool Change Basic Programming (Fanuc / Siemens / Haas – if applicable) Blueprint Reading Quality Inspection Tools (Vernier, Micrometer, Dial Gauge) Knowledge of ISO/TS safety standards (preferred) Job Types: Full-time, Permanent, Fresher Pay: ₹10,000.00 - ₹20,000.00 per month Benefits: Food provided Health insurance Provident Fund Schedule: Day shift Fixed shift Rotational shift Supplemental Pay: Performance bonus Work Location: In person

At Arabelle Solutions, we’re proud to design services and solutions that are generating power not just for today and tomorrow but for generations to come. You’ll work alongside passionate bright minds. We offer a broad range of opportunities for those eager to build tomorrow’s world. We believe a supportive culture is key to reach common goals. Diversity and an inclusive mindset makes us and our business stronger. Lead Fabrication engineer is responsible for the management and integration of new site construction activity and shop activities to ensure smooth execution and quality products are delivered as required by the business and internalization plan. In addition, they are knowledgeable on turbine diaphragm, current manufacturing technologies including automation and digitalization, supervision of site construction, erection and commissioning of structure and building according to design and specifications with thorough risk assessment in line with EHS framework. Demonstrate appropriate leadership behaviors to guide the team. Drive and coordinate the execution with (SQDC)Zero deviation in Safety and Quality. Roles and Responsibilities Managing and instructing the site supervisors, engineers, workers, setting their schedules, and monitoring their performance. Ensure 100% EHS compliance for daily operations within factory and at project sites. Promote diversity, equity, and inclusion as walk-the-talk of leadership quality. Ensuring all health and safety guidelines are followed strictly. Maintains a safe, secure, and healthy work environment. Conducting regular site inspections and addressing any potential hazards immediately Monitor and maintain the high-quality work during construction work and change management. Assesses safety in day-to-day work and takes care of the necessary permits. Drive project schedule and site readiness (Plan v/s Actual) Prepare and follow blueprint of future-ready factory operations and implement initiatives in various areas using state-of-the-art technologies and smart factory concepts (Including automation, digitization, robotics, machine learning, paper less factory etc.) Ensure that the business strategy is translated and cascaded down with implementation throughout the functional areas. Drive early integration of lean principles in process development for new product introductions, and hands-on initiatives to drive process improvement. Drive manufacturing excellence initiatives such as sustainability, smart manufacturing, and operational efficiency measurements including throughput, labor hours, cycle time, product cost & overall productivity. Strive excellence in the manufacturing processes to benchmark them against best in the world to emerge as Center of Excellence (COE) in large nuclear steam turbine manufacturing as well as service repairing. Daily monitoring and progress report out to leadership and overseeing the progress of all construction activities. Deep understanding of Nuclear & Services Projects Customer Mindset and able to cascade the requirements within organization Maintain housekeeping (5S), guide, monitor and supervise compliance with all safety standard, environment policy and norms (in line with ISO 9001, ISO 45001, ISO 14001, ISO 19443, ISO 3834-2 etc.) to ensure safe and healthy working environment. Knowledge of safe working load (SWL), Signals, slinging, anchored loads, unstable loads, winches, routine, and non-routine lifting activities, Thorough understanding technical knowledge of overhead cranes and mobile cranes and basic requirement of maintenance checks and general guidance for all cranes and hoist operation of before, during and after lift. Leads and coaches team members in a positive manner to maximize their potential and their contributions to key performance goals for the company. Assists in production/construction scheduling to ensure optimal utilization of equipment and people for best possible results Create awareness among team to raise stop work/quality concern on small deviations, unsafe act/unsafe conditions during work. Closely work with Process engineer/engineering team for any improvement on current manufacturing process/new upcoming projects Identify training need of the team based on the skill assessment and new project requirement. Control, Organize, monitor production operations as per plan, implement corrective action as necessary. Make recovery plan for delays, implement, and ensure targets agreed are achieved Ensure correct allocation of resources to make the Lean concepts deployment a success, make problems visible, and allow problem solving to take place. Lead and guide the team to develop & execute objectives for self & others with alignment to short-term & long-term business goals of the organization. Conduct Gemba walk to improve EHS & 5S in the respective area of the shop Responsible for execution cost (estimate Vs actual) Drive new product qualification and prepare related documentation. Desired skill set: Demonstrated integrity – accept and adhere to high ethical, moral, and personal values in decisions, communications, and actions when dealing with others Lean Mindset and understanding of lean and quality tool. (VSM, PFMEA, A3, 8D, 5S, 3P, 6sigma, SPS etc.) Understanding of new and relevant technologies and systems, such as artificial intelligence (AI), machine learning, robotics, industry trends, and best practices smart manufacturing, advanced digital technologies to enhance efficiency, adaptability, and sustainability. Resolves internal issues quickly (problem-solving skills) to meet customer expectations Strong oral and written communication skills. Strong interpersonal and leadership skills. Ability to coordinate activities of different teams / projects/suppliers/contractors Excellent process engineering capabilities and analytical skills. Thorough knowledge of heavy fabrication, machining and assembly processes, Know-how of steam turbine is beneficial. Experience in heavy fabrication and assembly Basic Knowledge of Heat treatment processes Understanding of safe practice and risk related welding process and EHS requirements Proper understand a Welding document like, WPS, Welding book & Welding sketch/types of welding joints (Geometry and Symbols) and different positions Knowledge of GMAW Welding Process – Welding Position: PC, PF-Butt & PF, PD-Fillet. Knowledge of SAW Welding Process with higher thickness – Welding Position-PA. Good knowledge of welding sequence for control a distortion during welding. Knowledge of inspection requirements and welding quality/defects impacts, visual inspection criteria Knowledge of defect/discontinuity of fabrication processes Key machining process – CNC turning, Milling, boring, tooling, Job set up, inspection/quality method, depth knowledge of welding, fit up, oxy cutting, rolling, bending, heat treatment, blasting, DT and NDT inspection. Thorough understanding of Engineering Drawings, Standards and Specifications Come up with the alternative approach while raising a problem or a challenge Able to work cross functional teams to generate customer solutions as the final goal Ability to identify and implement cost reduction strategies based upon process improvements and experience. Ability to develop credibility with employees, manager, and peers High attention to detail and accuracy of every task and anticipate the future risks or challenges in advance. Basic Qualifications(requirements): BE/BTech/Diploma in Mechanical /Production min 10 years of relevant experience – min 5-year core experience of Manufacturing/method of heavy machining and assembly, fabrication of large casings or similar types of product line. Reporting: Direct reporting to Manufacturing Excellence Leader - Lean and Strategic Change Management & dotted line reporting to Fabrication Shop Leader Join us and work with global teams to support global customers ! At Arabelle Solutions, we have team members of more than 49 nationalities spread across 16 countries. At Arabelle Solutions, we know diversity makes teams and business stronger.

At Arabelle Solutions, we’re proud to design services and solutions that are generating power not just for today and tomorrow but for generations to come. You’ll work alongside passionate bright minds. We offer a broad range of opportunities for those eager to build tomorrow’s world. We believe a supportive culture is key to reach common goals. Diversity and an inclusive mindset makes us and our business stronger. The Lead Production engineer (Blade shop) is responsible for the management and integration of new site construction activity and shop activities to ensure smooth execution and quality products are delivered as required by the business and internalization plan. In addition, they are knowledgeable on turbine diaphragm, current manufacturing technologies including automation and digitalization, supervision of site construction, erection and commissioning of structure, building, machines according to design and specifications with thorough risk assessment in line with EHS framework. Demonstrate appropriate leadership behaviors to guide the team. Roles and Responsibilities Managing and instructing the site supervisors, engineers, workers, setting their schedules, and monitoring their performance. Ensure 100% EHS compliance for daily operations within factory and at project sites. Promote diversity, equity, and inclusion as walk-the-talk of leadership quality. Ensuring all health and safety guidelines are followed strictly. Maintains a safe, secure, and healthy work environment. Conducting regular site inspections and addressing any potential hazards immediately Monitor and maintain the high-quality work during construction work and change management. Assesses safety in day-to-day work and takes care of the necessary permits. Drive project schedule and site readiness (Plan v/s Actual) Prepare and follow blueprint of future-ready factory operations and implement initiatives in various areas using state-of-the-art technologies and smart factory concepts (Including automation, digitization, robotics, machine learning, paper less factory etc.) Ensure that the business strategy is translated and cascaded down with implementation throughout the functional areas. Drive early integration of lean principles in process development for new product introductions, and hands-on initiatives to drive process improvement. Drive manufacturing excellence initiatives such as sustainability, smart manufacturing, and operational efficiency measurements including throughput, labor hours, cycle time, product cost & overall productivity. Strive excellence in the manufacturing processes to benchmark them against best in the world to emerge as Center of Excellence (COE) in large nuclear steam turbine manufacturing as well as service repairing. Daily monitoring and progress report out to leadership and overseeing the progress of all construction activities. Deep understanding of Nuclear & Services Projects Customer Mindset and able to cascade the requirements within organization Maintain housekeeping (5S), guide, monitor and supervise compliance with all safety standard, environment policy and norms (in line with ISO 9001, ISO 45001, ISO 14001, ISO 19443, ISO 3834-2 etc.) to ensure safe and healthy working environment. Knowledge of safe working load (SWL), Signals, slinging, anchored loads, unstable loads, winches, routine, and non-routine lifting activities, Thorough understanding technical knowledge of overhead cranes and mobile cranes and basic requirement of maintenance checks and general guidance for all cranes and hoist operation of before, during and after lift. Leads and coaches team members in a positive manner to maximize their potential and their contributions to key performance goals for the company. Assists in production/construction scheduling to ensure optimal utilization of equipment and people for best possible results Create awareness among team to raise stop work/quality concern on small deviations, unsafe act/unsafe conditions during work. Closely work with Process engineer/engineering team for any improvement on current manufacturing process/new upcoming projects Identify training need of the team based on the skill assessment and new project requirement. Control, Organize, monitor production operations as per plan, implement corrective action as necessary. Make recovery plan for delays, implement, and ensure targets agreed are achieved Ensure correct allocation of resources to make the Lean concepts deployment a success, make problems visible, and allow problem solving to take place. Lead and guide the team to develop & execute objectives for self & others with alignment to short-term & long-term business goals of the organization. Conduct Gemba walk to improve EHS & 5S in the respective area of the shop Responsible for execution cost (estimate Vs actual) Drive new product qualification and prepare related documentation. Desired Characteristics Demonstrated integrity – accept and adhere to high ethical, moral, and personal values in decisions, communications, and actions when dealing with others Lean Mindset and understanding of lean and quality tool. (VSM, PFMEA, A3, 8D, 5S, 3P, 6sigma, SPS, single piece flow processes etc.) Understanding of new and relevant technologies and systems, such as artificial intelligence (AI), machine learning, robotics, industry trends, and best practices smart manufacturing, advanced digital technologies to enhance efficiency, adaptability, and sustainability. Work experience with implementation of adaptable robotics/automation. Resolves internal issues quickly (problem-solving skills) to meet customer expectations Strong oral and written communication skills. Strong interpersonal and leadership skills. Ability to coordinate activities of different teams / projects/suppliers/contractors Excellent process engineering capabilities and analytical skills. Thorough knowledge of blade machining and assembly processes, Know-how of steam turbine is beneficial. Key machining process – 5 Axis blade machining, blade assembly, CNC Milling, boring, tooling, Job set up, blade polishing, CMM inspections, product inspection including NDE/quality method and techniques. Thorough understanding of Engineering Drawings, Standards and Specifications Come up with the alternative approach while raising a problem or a challenge Able to work cross functional teams to generate customer solutions as the final goal Ability to identify and implement cost reduction strategies based upon process improvements and experience. Ability to develop credibility with employees, manager, and peers High attention to detail and accuracy of every task and anticipate the future risks or challenges in advance. Required Qualifications BE/BTech/Diploma in Mechanical /Production min 10 years of relevant experience – min 5-year core experience of Manufacturing/method of turbine blade manufacturing or similar/relevant types of product line. Reporting: Direct reporting to Manufacturing Excellence Leader - Lean and Strategic Change Management & dotted line reporting to Manufacturing Leader – Turbine Shop COE Join us and work with global teams to support global customers ! At Arabelle Solutions, we have team members of more than 49 nationalities spread across 16 countries. At Arabelle Solutions, we know diversity makes teams and business stronger.

At Arabelle Solutions, we’re proud to design services and solutions that are generating power not just for today and tomorrow but for generations to come. You’ll work alongside passionate bright minds. We offer a broad range of opportunities for those eager to build tomorrow’s world. We believe a supportive culture is key to reach common goals. Diversity and an inclusive mindset makes us and our business stronger. The Turbine Modules Mechanical Design Engineer will work for world-class nuclear steam turbines, which are industry leading equipment in terms of performance, availability and power and will play a central role in mechanical engineering performance. Perform general studies of the steam turbine components using CATIA V5. Responsibilities: Conduct design or adaptation studies for turbine components: sizing, design, analysis; Develop 3D models using CATIA V5 in accordance with GE methodology; Draft component supply and manufacturing drawings; Produce bills of materials using GE tools (VPDM & RPDM); Responsible for the timely delivery of engineering documentation; Responsible for the creation of written method instructions (factory, assembly, maintenance). Authority: support the project mechanical lead engineer (MLE) for the preparation of manufacturing orders (RPDM) support the MLE in responding to clarifications, derogations and plant and site non-conformities (analysis and proposal of solutions); support the MLE for engineering design reviews and factory feedback meetings (feedback analysis, design evaluation, interface analysis). Profile Education: Degree in mechanical engineering / mechanical design Experience: Engineer with at least 5 years of experience in a mechanical design environment (energy, oil, aeronautics, special machines). Behavioural and/or Technical Know-how Knowledge of standard mechanical construction parts (plates, tubes, bolts, flanges, etc.) General knowledge of standard manufacturing processes (welding, casting, forging, turning, milling, etc.) Use of common IT tools: Excel, Word, Power Point, Outlook Experienced user of advanced CAD software: Catia V5 ( at least 3 years of experience). 3DVia user (preferred) User of PLM software: Enovia (preferred) Language skills: English: Fluent Join us and work with global teams to support global customers ! At Arabelle Solutions, we have team members of more than 49 nationalities spread across 16 countries. At Arabelle Solutions, we know diversity makes teams and business stronger.

At Arabelle Solutions, we’re proud to design services and solutions that are generating power not just for today and tomorrow but for generations to come. You’ll work alongside passionate bright minds. We offer a broad range of opportunities for those eager to build tomorrow’s world. We believe a supportive culture is key to reach common goals. Diversity and an inclusive mindset makes us and our business stronger. Overall Target of the Position: Establish the detailed manufacturing processes of the job utilizing own experience and coordination with lead factories for implementing their best processes and practices. Drive the culture of continuous improvements and take lean initiatives. Drive and coordinate the execution of Machine Shop operations, machining and assembly processes related to machining wing to wing with (SQDC)Zero deviation in Safety and Quality. Ensure alignment of different stakeholders to achieve OTD & shop Utilization. Responsibilities Define and finalize the manufacturing process in the form of MOPs & SOPs for every component of Turbine Casing well in advance to the start of production. Work out optimum handbook hours & plate requirements in detail for every project. Envisage requirement of project tools and tackles required for production and drive procurement for timely availability. Preparation of delivery lists for dispatch. Validation of MOP Hours and process steps with shop. Coordinate and support Shop Planner for project scheduling and outsourcing of process activities ensuring efficient utilization of resources. Identifies & resolves technical issues prior to the start and during the production processes. Provide NCR dispositions and coordinate with engineering as applicable and implement corrective actions in future jobs. Record the learnings and process improvements and sustain through continuous updation of manufacturing process. Usage of various quality and lean tools viz. VSM, PFMEA, 8D and 5S Empower and support shop engineers for process change suggestions and implementation. Drive new product qualification and prepare related documentation. Continuously improve manufacturing process Uses technical experience and analytical thinking. Uses multiple internal and limited external sources outside of own teams to arrive at decisions. Acts as a resource for colleagues with less experience. Explains information; developing skills to bring team members to consensus around topics within field. Key Performance Indicators EHS and Lean On Time Delivery COPQ (Cost of Poor Quality) control New product qualification Root cause analysis & Risk assessment Process improvement Desired Skill set: Excellent process engineering capabilities and analytical skills. Thorough knowledge of heavy machining and assembly processes, Know how of steam turbine is beneficial. Key machining process – CNC turning, Milling, boring, tooling, Job set up and inspection/quality method. Thorough understanding of Engineering Drawings, Standards and Specifications Strong EHS & quality focus Strong interpersonal and leadership skills Strong oral and written communication skills Ability to identify and implement cost reduction strategies based upon process improvements and experience. Ability to develop credibility with employees, manager, and peers High attention to detail and accuracy of every task and Anticipate the future risks or challenges in advance Vendor development skills for new products and processes. Demonstrated integrity – accept and adhere to high ethical, moral, and personal values in decisions, communications, and actions when dealing with others Resolves internal issues quickly to meet customer expectations Come up with the alternative approach while raising a problem or a challenge Able to work cross functional teams to generate customer solutions as the final goal Required Qualifications BE/BTech/Diploma in Mechanical /Production min 10 years of relevant experience – min 5-yearcore experience of process/method of heavy machining and assembly Join us and work with global teams to support global customers ! At Arabelle Solutions, we have team members of more than 49 nationalities spread across 16 countries. At Arabelle Solutions, we know diversity makes teams and business stronger.

At Arabelle Solutions, we’re proud to design services and solutions that are generating power not just for today and tomorrow but for generations to come. You’ll work alongside passionate bright minds. We offer a broad range of opportunities for those eager to build tomorrow’s world. We believe a supportive culture is key to reach common goals. Diversity and an inclusive mindset makes us and our business stronger. Install, maintain, and repair internal factory equipment as per the guidance from the Supervisor. Responsible for the task execution or activities within a technical discipline with safety. Fallow The job procedures and suggest for modification of procedures and practices covering work till the end results meet standards of acceptability (quality, volume, timeliness etc.). Hands on experience CNC machines – like heavy boring and milling machines, Horizontal and vertical turning machines, Gantry type milling/turning machines like PAMA, HNK, Waco etc Hands on experience in Fabrication machines – like rolling machine, oxy cutting, shot blasting, furnace, welding machine ( TIG & MIG ),Gauging & SAW machines and painting facility maintenance. knowledge in Hydrostatic and Hydraulic systems, Knowledge in EOT crane maintenance Suggest for Spare parts planning through Preventive maintenance. Support external service execution. Closing internal & external maintenance orders Suggest in maintenance planning. Execute Preventive, Predictive and Breakdown Maintenance for critical and other equipment as per check list. Basic Knowledge of Nuclear Safety. Understanding of EHS requirements. Be familiar with the emergency procedures. Understanding of EHS process for LOTO, Confined Spaces, Work at Height, Electrical Safety. Basic Qualifications(requirements): ITI In Mechanical with 4+ Years’ Experience Desired Qualifications: Maintenance of Machine tools with CNC system Knowledge of Fabrication Equipment maintenance. Knowledge of Mechanical and Hydraulic System in machines. Join us and work with global teams to support global customers ! At Arabelle Solutions, we have team members of more than 49 nationalities spread across 16 countries. At Arabelle Solutions, we know diversity makes teams and business stronger.

Job Overview: We are looking for a motivated and detail-oriented CNC Programmer to join our production team in VKI, Jaipur . The ideal candidate should have basic knowledge of CNC machines, tooling, and G-code programming. You will be responsible for creating and modifying CNC programs to support production targets and ensure product quality. Key Responsibilities: Create and edit basic CNC programs (G-code/M-code) for turning/milling machines. Operate CNC machines as required and perform program trials. Read and interpret engineering drawings and specifications. Select appropriate tools, cutting parameters, and machining processes. Perform basic machine setups and tool offsets. Monitor machine operations and inspect finished parts using basic measuring instruments. Work with the production and quality teams to resolve issues. Maintain proper documentation of programs and machine logs. Adhere to safety and quality standards during all operations. Requirements: ITI/Diploma in Mechanical or related field. Minimum 1 year of experience in CNC programming and operation. Basic knowledge of CNC controls (Fanuc / Siemens / Haas preferred). Ability to read technical drawings and use measurement tools like vernier, micrometer, etc. Understanding of shop-floor safety practices. Willing to work in shifts if required. Preferred: Familiarity with basic CAD/CAM software (optional). Exposure to production environments in automotive or metal industry. How to Apply: Interested candidates can share their CV at careers@karban.in Job Type: Full-time Pay: ₹300,000.00 - ₹480,000.00 per year Schedule: Day shift Supplemental Pay: Commission pay Ability to commute/relocate: Jaipur, Rajasthan: Reliably commute or planning to relocate before starting work (Required) Work Location: In person

Good Exp in SolidCAM Programmer & expertise in CNC 5-axis Milling Programming. Understanding of CAD/CAM software, toolpath strategies, complex 3D CAD models and 2D drawings. CNC machines to ensure accurate G-code output. Select right cutting tools. Required Candidate profile Validate programs, perform first-article runoffs & resolve shop floor issues Ensure dimensional accuracy by incorporating GD&T requirements into the programming process Cycle Time Reduction & Document Perks and benefits Incentive, saturday W-off, Canteen, Cab, Insurance

Purchase Engineer - Machining A Purchase Engineer with machining knowledge responsible for procuring goods, services, and materials related to machining and manufacturing processes. Educational Qualifications* Bachelor’s degree in mechanical engineering, Manufacturing Engineering, or a related field. With 6 to 8 yrs of experience Diploma Engineering in Mechanical/Production with 10-12 yrs of experience. Technical Skills* Machining knowledge*: Familiarity with machining processes, such as turning, milling, drilling, and grinding. Manufacturing processes*: Understanding of manufacturing processes, including casting, forging, and welding. Process knowledge Product knowledge CNC operation knowledge Tooling Knowledge Basic knowledge of materials Machine tools (lathe, milling machine, drill press) Cutting tools (milling cutters, turning tools, drill bits) Measuring and inspection tools) Materials science: Basic Knowledge of various materials, including metals, alloys, etc. tooling Knowledge, various types of tools, for various processes Quality control: Understanding of quality control processes and standards, such as ISO 9001. Soft Skills* Communication: Excellent communication and negotiation skills to interact with suppliers, manufacturers, and internal stakeholders. Analytical skills: Ability to analyse data, identify trends, and make informed decisions. Problem-solving: Strong problem-solving skills to resolve issues related to procurement, quality, and delivery. Time management: Ability to prioritize tasks, manage multiple projects, and meet deadlines. Collaboration: Ability to work collaboratively with cross-functional teams, including engineering, manufacturing, and quality. Experience* Experience in procurement, purchasing, or supply chain management in a manufacturing or engineering environment. Machining industry experience: Experience working in the machining industry, either as a supervisor/manager, manufacturing engineer, or quality engineer will be added advantage.

Key Responsibilities:Operate CNC machines (e.g., lathes, mills, routers) to perform tasks such as drilling, grinding, milling, or turning. Read and interpret blueprints, technical drawings, and job orders to determine machine setup and operation. Set up tools and materials onto machines and perform trial runs to ensure proper functioning. Monitor machine operations and make necessary adjustments to control the quality of output. Inspect finished parts using precision measuring instruments (calipers, micrometers, gauges). Perform routine maintenance on machines (cleaning, lubrication, basic troubleshooting). Record production data, machine settings, and quality control results. Ensure adherence to safety protocols and company policies. Collaborate with engineers, quality control staff, and supervisors to resolve any production issues. CNC Machine Operation Certification (Optional but preferred). Basic knowledge of 5S, TPM, or ISO standards is an advantage. Work Conditions: Standing for long periods. Working near machinery, with noise and dust (PPE provided). Rotational shifts or fixed shift schedules depending on company policy.

Greetings!!! We are hiring Machine Operators for our concern located in Ambattur. We provide Salary Rs.16000 to Rs.40000 based on experience Candidates required for ( CNC, VMC, Lathe operators, Milling operators, Setters, Programmers ) We provide ESI, PF, Canteen, Transport, OT Allowances Rotational Shift Only Prefer MALE Candidates only

Job Summary: We are seeking a skilled DRO Milling Machine Operator to operate and maintain milling machines equipped with Digital Readout (DRO) systems. The candidate should have hands-on experience with manual milling operations, ability to read technical drawings, and a strong focus on precision and quality. Key Responsibilities: Operate DRO milling machines to machine parts as per technical drawings. Set up workpieces, tools, and fixtures on the machine. Monitor machining operations to ensure accuracy and quality. Measure and inspect parts using precision instruments (e.g., vernier, micrometer, height gauge). Adjust machine settings and offsets as needed. Maintain cleanliness and safety in the work area. Report any machine issues or deviations to the supervisor. Requirements: Experience operating manual milling machines with DRO systems. Ability to read and interpret mechanical drawings. Basic knowledge of tooling and machining processes. Familiarity with measuring instruments and quality standards. Good attention to detail and problem-solving skills. ITI or Diploma in Mechanical/Production Engineering (preferred).

Company Description Leadec is a leading global service specialist for factories and their infrastructure. With headquarters in Stuttgart, Leadec generated sales of EUR 1.24 billion in 2023 and employs around 23,000 people worldwide. With over 60 years of experience, Leadec supports customers across the entire production supply chain at more than 350 sites. Their services include engineering, installation, maintenance, support, and digital solutions. Position: Machine shop Maintenance Location: Chennai & Hosur & Bangalore Qualifications: Diploma Electrical / Electronics / BE Electronics / Electrical Responsibilities: Experience in handling Machine shop Maintenance (Grinding / turning/ Machining center m/c) Preferably in crank shaft / cam shaft/Gear machining / precision machining independently. Having good experience in Grinding machine, Turning center, Machining center (HMC/VMC), Induction Hardening, Gantry Maintenance Exposure in dealing with Fanuc, Siemens CNC/PLC control system for grinding, turning, milling, Machining center. Expert in CNC & PLC maintenance, able to do the PLC & HMI programming. Understanding of CNC parameter and will be update in the system. Clear understanding on Breakdown maintenance, Preventive maintenance, Corrective maintenance, predictive maintenance and measuring parameters like MTBF, MTTR and OEE and implement the same. Familiar with Capturing Predictive data for various critical machines. Good vendor network for repairing PLC/CNC card, drive, PCBs Familiar with Gantry maintenance. Experience about Induction hardening, heat treatment process Electrical drawing need to understand and configuration of two software/hardware Good knowledge of Scale, encoder, Drives, Spindle drive, power supply drives etc. APPLY NOW

Company Description Sriram Coaters, based in Viralimalai, Tamil Nadu, specializes in high-precision CNC machining and plating services for auto components. We serve leading automotive clients like ZF, Rane, and TVS with advanced machinery and a skilled team. Our expertise includes manufacturing critical components such as rack pistons and providing copper plating services. We aim to expand into advanced plating processes like zinc and nickel plating to cater to industries like automotive, aerospace, and heavy machinery. At Sriram Coaters, precision, quality, and customer satisfaction drive our commitment to growth and innovation. Role Description This is a remote internship role for a CNC Operator Trainee. The CNC Operator Trainee will be responsible for assisting in the operation of CNC machines, performing quality control checks, and learning machining and milling techniques. The trainee will also have the opportunity to work with advanced machinery and gain hands-on experience in high-precision manufacturing processes. Qualifications Machine Operation, Machining, and Milling skills Experience or willingness to learn Quality Control techniques Basic understanding of CNC machinery operation and maintenance Strong attention to detail and commitment to quality Excellent problem-solving skills and ability to follow instructions Relevant educational background or coursework in mechanical engineering or related field

Greetings from Plansee India HPM Pvt. Ltd. 1,00,000 products and tools made of the strong metals’ Tungsten and Molybdenum: This has been Our mission and passion for over 100 years, shared by 11000 employees all over the world. We at the Plansee Group still have big plans_ and we will get even better with you! Become part of our growing Team! Responsibilities include 2D/3D Design creating detailed designs and models for new products. Programming, writing and optimizing code for 2D, 3D, and multi-axis machining processes using Mastercam and NX. Proving New Products Testing and validating new product designs to ensure they meet specifications. Assisting Operators, helping machine operators with setups and machining processes. Working closely with the Quality Assurance department to ensure products meet customer requirements. Work Location - Mysore, Karnataka, India Milling Programmer - New Product Development PLANSEE India High Performance Materials Pvt.Ltd. Responsibilities 2D/3D designing and generating NC programs (2D, 3D, and multi-axis) using Siemens NX CAM, Mastercam, or similar software. This also involves creating proper documentation for new products and proving them within the specified time frame. Selecting and optimizing cutting tools, troubleshooting tool-related issues, ensuring efficient machining processes, and designing jigs and fixtures for new products. Selecting and implementing the latest Lean manufacturing methods and processes, such as 5S, Kaizen, PDCA, SFM, and the 8 Wastes. Maintaining 5S activities on the shop floor and regularly implementing Kaizen. Additionally, the role involves continuous improvements in production and the manufacturing of low-volume products. Ensuring the follow-up of Quality Management Systems (QMS) and Environmental Management Systems (EMS) throughout the entire department. Ensuring that safety norms are followed throughout the entire department. Updating the setup manual with process parameters after the completion of the sample order or first order. Include material accounting for first-time orders. Include updating the TM sheet after the completion of the sample order or first order. Problem-solving of day-to-day issues running on the shop floor. Include conducting process validation of mass production and critical products twice a year. Requirements Diploma or BE in Mechanical Engineering. 2-3 years of relevant experience in milling (VMC) operations, tooling, and setting. 4-5 years of hands-on experience in CAM programming and prove-outs. Proficient in Siemens NX CAM and Mastercam (2D, 3D, and multi-axis). Skilled in MS Office, presentation, and communication. Knowledge in designing & Multi-axis (5axis milling) programming. What We Offer Responsible work, a dynamic team and an excellent working atmosphere A secure job in an internationally active company Intensive initial training and ongoing development Healthy meals served fresh each day A varied educational program, even including sporting activities A job at Plansee is worth it. We look forward to hearing from you!

Greetings from Plansee India HPM Pvt. Ltd., 1,00,000 products and tools made of the strong metals’ Tungsten and Molybdenum: This has been Our mission and passion for over 100 years, shared by 11000 employees all over the world. We at the Plansee Group still have big plans_ and we will get even better with you! Become part of our growing Team! Responsibilities include operating 3-axis and multi-axis machines (5-axis milling) for new products and proving them. The position also involves assisting operators with setups, machining, and coordinating with the QA department to ensure the product quality meets customer requirements. Work Location: Mysore, Karnataka, India 5-axis Milling Operator and setter PLANSEE India High Performance Materials Pvt. Ltd. Responsibilities Use appropriate clamps or fixtures to hold the workpiece firmly in place. Double-check that there is no movement. Use alignment tools like dial indicators or edge finders to ensure the workpiece is positioned correctly. Verify all machine settings, including speed, feed rate, and tool path, to match the requirements of our task. Perform dry runs without cutting to check the tool path and ensure there are no collisions or errors. To ensure that the planned production aligns with the daily planning of product codes to achieve the KPIs. Ability to read and modify CNC programs for optimal performance. To support supervisors in KAIZEN, 5-S, PDCA, activities on daily basis. Select and optimize cutting tools, troubleshoot tool-related issues, and ensure efficient machining processes. Perform first article inspections and verify conformance to specifications using precision metrology tools. Work closely with engineers and machinists to maintain throughput and reduce scrap/rework. Experience in leading or mentoring machinists and managing workflows involving multiple machines. Making necessary adjustments during the machining process to maintain precision. Requirements Diploma in Mechanical Engineering. 4-5 years of relevant experience in 5axis milling (VMC) operations, tooling, manual/CAM programming basic knowledge, setting and prove-outs. Expertise in Machining Line (Milling), relevant experience in metal cutting sector, Communication skills, hands-on experience and Problem-solving techniques. Certifications in Basics of CNC Programming is added advantage. (Not mandatory) MS Office and CNC Machining (Mandatory). What We Offer Responsible work, a dynamic team and an excellent working atmosphere A secure job in an internationally active company Intensive initial training and ongoing development Healthy meals served fresh each day A varied educational program, even including sporting activities Company pension scheme and other employee benefits A job at Plansee is worth it. We look forward to hearing from you!

Company Description Greenbotz Platform Private Limited is a leader in integrated facility management, ERP solutions for small-scale enterprises, and advanced technologies like IoT, robotics, AR, VR, video analytics, and machine learning algorithms. The company's mission is to empower businesses with innovative technological solutions that boost productivity and sustainability. Role Description This is an internship Mechanical Design & Manufacturing Supervisor role at Greenbotz Platform Private Limited located in Coimbatore. The role involves overseeing day-to-day tasks related to maintenance, mechanical engineering, computer-aided design (CAD), inspection, and automotive processes on-site. Key Responsibilities: Supervise and mentor interns involved in CAD modeling, simulation, and design. Review and validate 3D models for mechanical feasibility, tolerance, and DFM (Design for Manufacturing) compliance. Coordinate and push forward the machining process with internal or external fabricators to avoid delays. Act as a technical liaison between design, production, and quality teams. Ensure models transition smoothly from digital design to physical prototype or final product. Troubleshoot and resolve design or manufacturing issues as they arise. Maintain strict adherence to project timelines and deliverables. Requirements: Bachelor’s degree in Mechanical Engineering or related field. Minimum 3 years of experience in mechanical design and manufacturing. Proficient in CAD software (SolidWorks, Fusion 360, or similar). Strong understanding of machining processes (CNC, milling, turning, etc.). Excellent problem-solving and project management skills. Ability to work under tight deadlines and drive results independently. Prior experience supervising junior staff or interns is a plus. Preferred: Familiarity with rapid prototyping or product development cycles. Exposure to materials selection and basic stress/thermal simulations.

Job Summary: The QC Manager will be responsible for ensuring the highest quality standards in mould base manufacturing. The role requires extensive knowledge of precision machining processes and quality inspection methods, along with hands-on expertise in operating and managing measuring instruments. This position will lead the QC team and ensure that products meet internal and customer requirements consistently. Key Responsibilities: Develop, implement, and maintain quality control processes , SOPs, and inspection procedures for mould base manufacturing. Lead incoming, in-process, and final inspection activities using a wide range of measurement tools. Ensure compliance with ISO 9001:2015 and other applicable quality standards. Perform root cause analysis (RCA) and lead corrective & preventive action (CAPA) processes for internal and customer complaints. Coordinate with production, design, and procurement departments to address and resolve quality-related issues. Drive continuous improvement projects to minimize rejection rates and optimize quality. Prepare and maintain quality documentation, inspection records, and calibration logs. Guide, train, and develop the QC team on quality tools, product specifications, and inspection techniques. Represent the quality department during customer audits and technical discussions . Key Skills and Competencies: Strong knowledge of precision machining processes (VMC, CNC, Surface Grinding, Milling, Drilling). Proficient in reading engineering drawings , GD&T, and tolerance limits. Expertise in root cause analysis tools (5 Why Analysis, Ishikawa, Pareto, etc.). Strong leadership, team management, and problem-solving skills. Excellent communication for internal coordination and customer interaction. Instruments & Equipment Knowledge: CMM (Coordinate Measuring Machine) – Operation & Programming Height Gauge (Digital/Analog) Vernier Calipers (Digital/Analog) Micrometers (Outside, Inside, Depth) Bore Gauges / Dial Bore Gauges Dial Indicators / Lever Type Indicators Surface Roughness Tester Angle Protractors & Bevel Protractors Slip Gauges & Feeler Gauges Plug Gauges, Thread Gauges, Ring Gauges Hardness Tester (Optional, if applicable) Calibration & Maintenance of Measuring Instruments Qualification & Experience: Diploma/Degree in Mechanical Engineering or equivalent technical qualification. 7 to 12 years of experience in Quality Control in mould base / tool room / precision component manufacturing . Experience in handling a team of inspectors and technicians. Preferred Certifications: ISO 9001:2015 Internal Auditor Certification Six Sigma Green Belt (Preferred) Job Types: Full-time, Permanent Pay: ₹9,000.00 - ₹30,000.00 per month Benefits: Cell phone reimbursement Health insurance Paid sick time Provident Fund Schedule: Rotational shift Supplemental Pay: Performance bonus Work Location: In person

Job Description: To lead and oversee the day-to-day operations of the mould base manufacturing facility, ensuring optimum productivity, quality control, cost efficiency, and timely delivery while maintaining safety standards and team motivation. Key Responsibilities:Production & Operations Management: Plan, organize, and control manufacturing operations to meet production targets. Monitor mould base manufacturing processes like milling, grinding, drilling, and assembly. Ensure the optimum utilization of manpower, machines (VMC, CNC, grinders, etc.), and materials. Drive process improvements for better productivity and efficiency. Quality Assurance: Ensure product quality as per the specified standards. Coordinate with the QC department for inspection and testing of mould base components. Address any production or quality-related issues. Maintenance & Resource Planning: Plan preventive maintenance schedules of machines and tools. Ensure availability of consumables, raw materials (plates, standard parts), and tooling. Coordinate with stores and procurement teams for inventory management. Team Management: Lead a team of supervisors, engineers, and operators. Train and motivate the shop floor team for skill enhancement and high performance. Manage shift schedules and allocate work. Safety & Compliance: Ensure workplace safety and adherence to health and safety policies. Ensure compliance with company and industry standards. Cost & Efficiency Management: Monitor and control operational costs. Minimize rework, scrap, and wastage. Coordination & Reporting: Coordinate with design, sales, and dispatch teams for smooth order execution. Prepare daily/weekly production and performance reports for management review. Key Skills & Competencies: Strong technical knowledge of mould base manufacturing processes. Excellent leadership and team management skills. Problem-solving and decision-making abilities. Strong communication and interpersonal skills. Good understanding of Lean Manufacturing / Kaizen / 5S practices is preferred. Job Types: Full-time, Permanent Pay: ₹30,000.00 - ₹50,000.00 per month Schedule: Day shift Work Location: In person

Job Description: To lead and manage the tool room operations for manufacturing, maintenance, and improvement of mould bases and tooling components, ensuring timely delivery, quality, and adherence to technical specifications. Key Responsibilities: Manage day-to-day activities of the tool room, ensuring smooth operation and workflow. Plan and allocate jobs for toolmakers, machinists, and fitters as per production schedules. Supervise the manufacturing, assembly, and maintenance of mould bases, inserts, and components. Ensure the proper use and maintenance of tool room machines such as: Milling Machines (Conventional & CNC) Surface Grinder EDM, Wire Cut Machines Lathe Machines VMC / CNC Machines Drilling Machines Read and interpret engineering drawings and tool designs accurately. Implement quality checks at each stage of machining and assembly. Coordinate with the QC team to resolve quality issues. Control inventory of raw materials, tools, and consumables for the tool room. Manage preventive maintenance schedules of all tool room equipment. Guide and train the tool room team to improve their technical skills. Ensure compliance with safety and housekeeping standards. Liaise with the design team for technical feasibility and tooling improvements. Drive continuous improvements in tooling processes to increase efficiency and reduce lead times. Required Skills & Knowledge: Strong technical knowledge of mould base manufacturing. Hands-on experience in precision machining processes. Proficient in reading technical drawings and tolerances. Knowledge of tool steels, machining parameters, and heat treatment processes. Familiarity with measuring instruments such as Vernier Caliper, Micrometer, Bore Gauge, Height Gauge, Dial Indicators, etc. Problem-solving and troubleshooting skills. Leadership and team management abilities. Basic understanding of CAD/CAM software is preferred. Job Types: Full-time, Permanent Pay: ₹30,000.00 - ₹50,000.00 per month Schedule: Day shift Experience: total work: 7 years (Preferred) Work Location: In person