1133 Microstation Jobs - Page 4

Job Purpose Candidates need to demonstrate strong leadership skills which will include but not limited to Project management, Bid Support, business excellence and client communications for ICT, Security and ELV Systems in line with client’s specifications and business guidelines. Candidate will be responsible to collaborate with internal & external design stakeholders on project for successful submission on all ICT, Security and ELV domain assignments for various market projects across various global regions. Duties And Responsibilities Scope Identification, Design, supporting reports/drawings and specification for ELV building services, supporting bid process, peer review. Client facing/client relationship/client management skills and effective written and verbal communication skills. Project management skills to include budget control, interdisciplinary coordination, good Client service skills and ability to meet Client requests and deadlines within budget Design delivery and team management along with End-to-end design experience for ICT, Security and ELV systems. As an expert, the candidate will also be required to attend and provide input in design meetings, clear advice to clients, architects, and engineers (internal and external) on design principles/issues relating to greenfield & brownfield projects. ICT, Security and ELV system design as per international Standards TIA/EIA, BS, BICSI, TRA, SIRA, ADMCC, TDRA. Evaluate and advise on ICT, Security and ELV related design changes and non-conformations to ensure fulfilment of the requirements. Developing suitable Schedules, Calculations & schematics, and further detailing in line with design requirement. Performing all aspects of ICT/ELV engineering design as a lead engineer, including Conceptual Studies, Program Requirements, Design Analyses, Calculations, Equipment selection and layout, and System selection and layout for building design and site ICT/ELV utilities Sound experience of other MEP Systems. BIM/Revit/ACC Overview, coordination, Navisworks design review & Design collaboration skills. Candidate Specification & Technical Expertise BE / BTech / MTech - Electrical / Instrumentation/ Electronics. 15+ years of work experience with ICT, Security and ELV system design involvements. Awareness of Autodesk CAD, Revit and BIM/ACC would be mandatory. Awareness on Bentley MicroStation, Aecosim & Open Building Design platforms will be an additive advantage. Expertise in Cisco/HP or equivalent Active networking system understanding or any relevant certifications (CCNA/CCNP etc.) will be an added advantage. Passive Networking infrastructure, Structured Cabling (FO, Copper) expertise with BISCI RCDD/ DCDC/ CTS or relevant chartership will be an added advantage. Design acumen for Smart Services and Building management system will be an added advantage. Strong design understanding of following building systems would be required: Local Area Network (LAN) (ICT Network Switches, Routers, Wi-Fi, Topology, Firewall, Cyber Security, Video Conference etc.). Electronic Access Control System (general Access control, Gate Barriers, Turnstile, Visitor Management etc.). Intrusion Detection System (IDS/PIDS, Buried, Fiber Optic, Microwave, Motion, Glass Break). Public Address & General Alarm (Speakers, Sounder, Beacon, Array). Closed Circuit Television System (CCTV, Analytics, Server & Storage, VMS, & NAS/SAN). Building Management Systems (BMS Architecture, Controllers with Modbus, BACnet, LON & OPS protocols, DMS & SCADA). Radio (AM/FM, TETRA) & GSM Infrastructure PABX, Intercom, Paging, IP Telephone. Smart services and associated integrations. Skills: revit,active networking systems,security system design,client relationship management,tia/eia, bs, bicsi, tra, sira, admcc, tdra.,public address systems,smart services,closed circuit television systems,structured cabling,building,design,ict system design,ict security,navisworks,access control systems,building management systems,project management,elv system design,intrusion detection systems,elv,design reviews,bim

Company Description Senior Designer- BIM- Ground Engineering Level 17, Tower B, Building No 5, DLF Cyber City, Phase – III, Gurugram – 122002, India Full-time Company Description Ramboll in Middle East and Asia Pacific At Ramboll, our 15,000 consulting engineers and scientists; designers and management consultants are based in more than 300 offices in 35 countries across the globe. In the Middle East and Asia Pacific region, we have more than 1,500 experts working across 15 offices present in India, Malaysia, Singapore, China, Hong Kong, Australia, New Zealand, Qatar, and the United Arab Emirates. Our experts are applying their passion to deliver innovative solutions in markets as diverse as Buildings, Transport, Planning & Urban Design, Water, Environment & Health, and Energy. Founded in Denmark, Ramboll is a people company. We invite you to contribute to a sustainable future working in an open, collaborative, and empowering culture. Job Description We invite you to bring your strong knowledge of Civil 3D, MicroStation, Open Road/Open tunnels, Geo-Structural drawing with Geotech knowledge, into play as you coordinate with project managers, engineers, and other technicians for technical delivery of wide range of engineering drawings for projects of varying complexity. To succeed in this role, you must have degree or diploma in Civil Engineering or experienced ITI. Are you our new Senior Designer-BIM? Click the apply-button to send your application. Inviting bright minds Do you want to push the boundaries of your profession and develop your excellence in an open, collaborative, and empowering culture? We work to create a sustainable future and our inspiring projects and innovative solutions strive to set the standard among our peers. You will join a global company that has been growing successfully since its founding in 1945. Together, we lead and leave a positive impact on societies, companies, and people around the world. You will join our REC department As our new [Senior Designer-BIM – Ground Engineering] you will be part of a world class, innovation driven engineering design centre owned by an independent trust and its employees. REC is a highly sophisticated center of engineering excellence and based in our India head office in Gurgaon. Working in partnership with all our established offices globally, the Ramboll Engineering Centre (REC) is a centre for excellence in design by offering optimized solutions to the rest of the organization. Your key tasks and responsibilities will be: Provides guidance and knowledge to juniors and works towards competence enhancement of other technician within the team Will assist the project team towards developing/implementing draughting standards. Drawing of 3D ground model as per the investigation report, preparation of plan, section elevation drawings. Will coordinate & communicate with technical manager or concerned engineers for input of drafting work in each project. Will work on detailed drawings, calculations, and coordinate with other members of the team in accomplishing tasks, fluency in English is a must. Is responsible for technical correctness and timely delivery of the drawings, 3D models and documents. Conversance with Euro code, Swedish Geotech drawing standards will be an add-on. Proficient in tunnel drawing/modelling, interpretation cloud data. Proficiency in AutoCAD & Civil3D is must. Should be familiar with Bentley software and be able to do corridor modelling. Knowledge in MicroStation , OpenTunnels/OpenRoads, Novapoint Geosuite, Navisworks is desirable. Exercises self-discipline and work ethic, respect and follow company policies and procedures. Qualifications From the moment you join Ramboll, we will support your personal and professional development so that you grow with the company. For this role, we believe your starting point is: Diploma in Civil Engineering or ITI Trained Professional with minimum of 6 years of professional experience. Candidate with B.Tech. will have the edge over others. Experience in Geotech work, 2D and 3D modelling. Novapoint Geosuite, OpenTunnels/OpenRoads, Microstation, experience of corridor modelling in Bentley Software desirable. Must have experience on international project, Swedish experience is an advantage. Self-motivated, team player and able to work independently with minimum supervision. Flexible attitude, in an environment with frequently changing deadlines can be relied on to meet deadlines. Personal qualities that will help you succeed in this role include: Strong knowledge of AutoCAD & Civil 3D and good level of written and spoken English. Additional Information Welcome to our Transport division Ramboll is a global transportation consultancy, and we work on some of the biggest and most innovative infrastructure projects in the world. We are close to 3,000 bright minds working within Transport worldwide, creating practical, sustainable, and economic solutions for national transport authorities, private contractors, and municipalities alike. Ramboll in India Ramboll has more than 1,000 experts working across five offices in India applying their passion to deliver innovative solutions in markets as diverse as Buildings, Transport, Planning & Urban Design, Water, Environment & Health, and Energy. Founded in Denmark, Ramboll is a people company. We invite you to contribute to a sustainable future working in an open, collaborative, and empowering culture. How to apply Are you our new Senior Designer-BIM- Ground Engineering? Click the apply-button to send your application. Apply online. Attach your CV, cover letter and relevant documents showcasing why you are the right fit for the role, and when you are available to start. We look forward to receiving your application. Qualifications Skills Required – AutoCAD, Civil 3D, Microstation, OpenRoads/OpenTunnels

Job Purpose Candidates need to demonstrate strong leadership skills which will include but not limited to Project management, Bid Support, business excellence and client communications for ICT, Security and ELV Systems in line with client’s specifications and business guidelines. Candidate will be responsible to collaborate with internal & external design stakeholders on project for successful submission on all ICT, Security and ELV domain assignments for various market projects across various global regions. Duties And Responsibilities Scope Identification, Design, supporting reports/drawings and specification for ELV building services, supporting bid process, peer review. Client facing/client relationship/client management skills and effective written and verbal communication skills. Project management skills to include budget control, interdisciplinary coordination, good Client service skills and ability to meet Client requests and deadlines within budget Design delivery and team management along with End-to-end design experience for ICT, Security and ELV systems. As an expert, the candidate will also be required to attend and provide input in design meetings, clear advice to clients, architects, and engineers (internal and external) on design principles/issues relating to greenfield & brownfield projects. ICT, Security and ELV system design as per international Standards TIA/EIA, BS, BICSI, TRA, SIRA, ADMCC, TDRA. Evaluate and advise on ICT, Security and ELV related design changes and non-conformations to ensure fulfilment of the requirements. Developing suitable Schedules, Calculations & schematics, and further detailing in line with design requirement. Performing all aspects of ICT/ELV engineering design as a lead engineer, including Conceptual Studies, Program Requirements, Design Analyses, Calculations, Equipment selection and layout, and System selection and layout for building design and site ICT/ELV utilities Sound experience of other MEP Systems. BIM/Revit/ACC Overview, coordination, Navisworks design review & Design collaboration skills. Candidate Specification & Technical Expertise BE / BTech / MTech - Electrical / Instrumentation/ Electronics. 15+ years of work experience with ICT, Security and ELV system design involvements. Awareness of Autodesk CAD, Revit and BIM/ACC would be mandatory. Awareness on Bentley MicroStation, Aecosim & Open Building Design platforms will be an additive advantage. Expertise in Cisco/HP or equivalent Active networking system understanding or any relevant certifications (CCNA/CCNP etc.) will be an added advantage. Passive Networking infrastructure, Structured Cabling (FO, Copper) expertise with BISCI RCDD/ DCDC/ CTS or relevant chartership will be an added advantage. Design acumen for Smart Services and Building management system will be an added advantage. Strong design understanding of following building systems would be required: Local Area Network (LAN) (ICT Network Switches, Routers, Wi-Fi, Topology, Firewall, Cyber Security, Video Conference etc.). Electronic Access Control System (general Access control, Gate Barriers, Turnstile, Visitor Management etc.). Intrusion Detection System (IDS/PIDS, Buried, Fiber Optic, Microwave, Motion, Glass Break). Public Address & General Alarm (Speakers, Sounder, Beacon, Array). Closed Circuit Television System (CCTV, Analytics, Server & Storage, VMS, & NAS/SAN). Building Management Systems (BMS Architecture, Controllers with Modbus, BACnet, LON & OPS protocols, DMS & SCADA). Radio (AM/FM, TETRA) & GSM Infrastructure PABX, Intercom, Paging, IP Telephone. Smart services and associated integrations. Skills: revit,active networking systems,security system design,client relationship management,tia/eia, bs, bicsi, tra, sira, admcc, tdra.,public address systems,smart services,closed circuit television systems,structured cabling,building,design,ict system design,ict security,navisworks,access control systems,building management systems,project management,elv system design,intrusion detection systems,elv,design reviews,bim

Role will include, but not be limited to: Model building and drawings of building services elements for Electrical services like lighting power, earthing and lightning protection systems, schematics, schedules, etc 3D model of physical substation in Revit and preparing 2D drawings. Basic electrical design calculations. QA/QC procedures Attention to quality and technical correctness Smooth coordination with other Mechanical, Structural and Architectural services Work within time limits to complete deliverables on time. Candidate Specification : Have ITI or Diploma or Degree in Electrical & Electronics Engineering Must have working experience in Electrical modelling for building services using Revit as a software. Must have experience in substation projects/Oil & Gas projects Experience in MicroStation will be an added advantage Be familiar with preparation of layout drawings and schematic diagrams for electrical services Exposure to British & GCC standards Have good written & verbal communication skills Be able to work without the help of mark-ups Exposure to platforms like BIM360 or Project wise preferred

The selected candidate will be responsible for: Model building and drawings of building services elements. Basic design calculations. Duct & pipe sizing. Knowledge of LODs & BSRIA standards. Quantities take off based design drawings. Carrying out checking of drawings. Coordination between other MEP disciplines, such as Electrical, Plumbing services. Work within time limits to complete deliverables on time. Candidate Specification: Minimum should have experience of 5 to 10 years in HVAC Modelling. Be a degree holder in Mechanical/Refrigeration and AC or equivalent in respective engineering discipline. Be proficient in drafting of HVAC systems, ducting and piping design, plant room layout, sections etc. Have good experience in relevant design software such as MicroStation/Open building design, REVIT, BIM 360, knowledge in Dynamo is preferred. Good communication skills and a professional attitude towards work, be a team player and have multi-disciplinary co-ordination skills. We can offer (subject to Company s policy): - Agile and safe working environment - Competitive annual leave and sick leaves - Group incentive scheme - Group term life insurance, Workmen s compensation and Group medical insurance coverage - Short and Long-term Global employment opportunities - Global collaboration and knowledge sharing - Digital Innovation and Transformation

Job Description WSP is currently seeking a Graduate Engineer in transportation planning and modelling to join the Canadian iCRC team in the Bengaluru office serving the Canadian private developments and public-sector markets. The Canadian Planning & Advisory group offers clients a wide range of multi-disciplinary services including transport modelling of highway intersections and signalized networks (using Synchro, Aimsum, Vissim) and regional / strategic transport systems (using Emme, VISUM, and TransCAD). Responsibilities The appointed candidate will assist senior team members in undertaking intersection analysis, traffic simulations, travel demand modelling and providing support services for the submission of traffic impact studies and transportation master plans. The successful candidate will work with experienced strategic and micro-simulation modellers across Canada who are at the cutting edge of modelling software application. Experience and knowledge of junction design and analysis, traffic softwares including (Synchro, SIDRA, HCS, Vistro), strategic modelling softwares (Emme, VISUM, Aimsun, TransCAD) and micro-simulation modelling (VISSIM) as well a good understanding of fundamental modelling techniques and traffic management techniques to enable you work effectively as part of the team. Be a core member of WSP’s Modelling/ Transport Planning team, with key focus on detail and quality; Develop reports, and presentations; Zeal to grow self and dedication towards working independently/ with minimal guidance where required; Attend and contribute in team and project meetings via Teams and Video-conferencing; Work within project constraints; such as time, budget and resource; Complete accurate timesheets by set deadline; Ensure that Health & Safety is embedded into all work practices in line with company policies; and Other duties as assigned. Qualifications Master’s degree in Transportation Planning or equivalent from an accredited university or Urban Planning degree with emphasis in transportation planning; A solid understanding of traffic engineering and traffic signal operations. Experience with transportation related software packages (i.e. Synchro, SIDRA, HCS and VISSIM ) is required; A solid understanding of Travel Demand Modelling and its applications. Experience with transportation modelling related software packages (i.e. EMME, VISUM and TransCAD) is required; Familiarity with graphic design, SharePoint, AutoCAD, Microstation, Bentley InRoads, and GIS software would be an asset; Excellent communication, presentation, proposal and report writing skills are essential; Post-graduate with 2+ years of International experience. Highly motivated and willing to take on new challenges; and Committed team player.

Job Description WSP is currently seeking an Assistant Engineer in transportation planning and modelling to join the Canadian GCC team in the Bengaluru office serving the Canadian private developments and public-sector markets. The Strategic Advisory & Planning group offers clients a wide range of multi-disciplinary services including transport modelling of highway intersections and signalized networks (using Synchro, Aimsum, Vissim) and regional / strategic transport systems (using Emme, VISUM, and TransCAD). Responsibilities The appointed candidate will assist senior team members in undertaking intersection analysis, traffic simulations, travel demand modelling and providing support services for the submission of traffic impact studies and transportation master plans. The successful candidate will work with experienced strategic and micro-simulation modellers across Canada who are at the cutting edge of modelling software application. Experience and knowledge of junction design and analysis, traffic software's including (Synchro, SIDRA, HCS, Vistro), strategic modelling software's (Emme, VISUM, Aimsun, TransCAD) and micro-simulation modelling (VISSIM) as well a good understanding of fundamental modelling techniques and traffic management techniques to enable you work effectively as part of the team. Responsibilities Be a core member of WSP’s Modelling/ Transport Planning team, with key focus on detail and quality; Develop reports, and presentations; Zeal to grow self and dedication towards working independently/ with minimal guidance where required; Attend and contribute in team and project meetings via Teams and Video-conferencing; Work within project constraints; such as time, budget and resource; Complete accurate timesheets by set deadline; Ensure that Health & Safety is embedded into all work practices in line with company policies; and Other duties as assigned. Qualifications Master’s degree in Transportation Planning or equivalent from an accredited university or Urban Planning degree with emphasis in transportation planning; A solid understanding of traffic engineering and traffic signal operations. Experience with transportation related software packages (i.e. Synchro, SIDRA, HCS and VISSIM ) is required; A solid understanding of Travel Demand Modelling and its applications. Experience with transportation modelling related software packages (i.e. EMME, VISUM and TransCAD) is required; Familiarity with graphic design, SharePoint, AutoCAD, Microstation, Bentley InRoads, and GIS software would be an asset; Excellent communication, presentation, proposal and report writing skills are essential; Post-graduate with 1 to 3 years of International experience. Highly motivated and willing to take on new challenges; and Committed team player.

Job Description Lead and manage the design and construction of roads and highways projects Oversee the planning, design, and construction of transportation infrastructure projects Manage a team of engineers and technicians to ensure project deadlines and budgets are met Conduct site visits and inspections to ensure designs are implemented correctly and comply with safety regulations Develop cost estimates, project schedules, and construction plans for roads and highways projects Coordinate with government agencies, contractors, and other stakeholders to ensure project success Qualifications Bachelor's degree in Civil Engineering or related field Minimum of 5 years of experience in the design and management of roads and highways projects Professional Engineer (IEng/CEng) license is preferred Proficiency in Civil 3D, AutoCAD, MicroStation, and PDS Signs and Lines. Strong communication and leadership skills Ability to manage multiple projects simultaneously and prioritize tasks effectively

Job Description Lead on the production of presentation material including diagrams and sketches where necessary to visually demonstrate design solutions to key project stakeholders, including the client. Assist the project team with the production of information to coordinate with specialist disciplines to deliver coherent information. Have an excellent understanding of UK building standards to implement in the design. The Senior Architect will report to the Principal architect. Responsibilities Manage the delivery of technical design information relevant to the specific project. Prepare design information in a BIM environment utilizing Autodesk Revit, Open building designer Understand technical construction requirements to inform the production of design information. Review / QC design information prepared by colleagues prior to formal approval. Identify potential design issues and come up with solutions to mitigate. Monitor design information for potential health and safety risks and contribute to risk identification and assessment reviews. coordination of design information with other specialist disciplines. Have an excellent understanding of statutory requirements for compliance. Contribute to meetings and document preparation to present proposals. Excellent working knowledge of UK building regulations and working to international standards. Working capability and proficiency in industry-standard design software such as MicroStation, open building designer(Aecosim), AutoCAD and Revit. Knowledge of Underground Metro Project delivery is required. Additional experience in other infrastructure buildings, rail or aviation projects would be appreciated. Lead projects/ packages within Buildings and transport projects Develop detail design drawings Qualifications BArch or relevant degree qualified. Strong technical design knowledge / skills in UK construction methodology. Experience of working as part of an architectural design team. Excellent conceptual, verbal and written communication skills. Fluency in English (oral and written) required.

Carry out FEED, Proposal and Detail engineering of Rotary equipment (viz,Pumps, compressors, fans, blowers, steam and gas turbines and packages) for chemical, petrochemical and refinery plants. Selection, Review of Rotating machinery in accordance to leading international, national codes and Standards such as API, ASME, ISO, ANSI and other Codes related to various rotating equipment and packages. Familiarity with material standards and specifications as well as requirements of ASME and HIS. Coordinate actively, communicate with other disciplines including static design, civil-structural, piping, electrical, instrumentation to optimise areas of interface during pre-bid and post-bid stages. Be front facing with client and engineering consultants deliver quality output on schedule. carry out discussions with client PMC independently. Preparation, Review of Mechanical Data Sheets, Material Requisition and Specifications for Rotating Equipment packages. Preparation and review of technical bid evaluation and technical recommendation for purchase. Communicate with Vendors effectively to resolve techno-commercial issues. Troubleshooting including vibration study and balancing of machines for optimal performance and longevity of equipment systems and plant etc. Prepare quick proposals for life cycle assessment and or extending life of machinery. Execute technical work for FEED/ DD within designated cost, time and resource CTR scope. Develop concept and feasibility studies, prepare quick proposals for new and modification of existing facilities for life cycle assessment / extension. Carry out detailed engineering in accordance with local, statutory compliance related to process plants with strong understanding of plant safety, implement safety in plant design, design conformance check to industry codes and standards namely ASTM/ASME/ANSI/API/NFPA/OISD/EIL/PDIL/International PMCs, EPCs and Process Licensors. Conversant with project automation database (eg smartplant), piping & Instrumentation diagram (P&ID), 2D and 3D AutoCAD and Microstation, SmartPLANT, PDS AUTOPLANT, project specific software tools. Network with experts from other institutions process licenses design consultants for problem solving in timely manner to meet project needs. Experience in participation in equipment PRT /MRT / package testing. Innovative solution provider using creativity and proven track records

Company Description Ramboll in India Ramboll has more than 1,000 experts working across five offices in India applying their passion to deliver innovative solutions in markets as diverse as Buildings, Transport, Planning & Urban Design, Water, Environment & Health and Energy. Founded in Denmark, Ramboll is a people company. We invite you to contribute to a sustainable future working in an open, collaborative and empowering culture. Job Description You will join our REC department As our new Team Lead/ Senior Principal Project Planner, you will be part of a world class, innovation driven engineering design centre owned by an independent trust and its employees. Ramboll Engineering Centre (REC) is a highly sophisticated center of engineering excellence and based in our India head office in Gurgaon. Working in partnership with all our established offices globally, REC is a Centre for excellence in design by offering optimized solutions to the rest of the organization. Your key tasks and responsibilities will be: Technical Responsibilities Leading a team of Project Planners & BIM Coordinators and should be able to share knowledge and develop the team skills and competence. Co-ordinate between various disciplines, documentation, folder structure, ensuring compliance with specification through design lead of respective disciplines. Develop and implement Design Strategies - develop and implement successful design strategies, outlining how the design team will create deliverables and implement them for the project. Manage Interfaces – Senior Principal Project Planner/Principal Project Planner initiate & coordinate for interface management process that includes development of Organisation Chart, Interface matrix, RACI Matrix, tracking progress of internal deliverables through weekly visual planning meetings using visual planning tools. Project Management, Reporting and controlling through tools like Earned Value Analysis. Development, Updating & Monitoring of Project & Design Schedules, and Work Breakdown Structure considering contract deliverables and resourcing needs using tools like Primavera P6, Microsoft Project Interact with Project Team and task managers to define the scope of work to develop and update develop and update schedules, cost information and identification of variances from original plan Analyze Critical Path and constraints to determine effect of changes to schedule and recommend work-around Establishing Project Baselines at the start of the Project and track it timely basis as required. Preparation of S-curves, Schedule variances, Project Dashboard, etc. Supporting Project Managers with all Key information related to the health of project, performance as per Baselines, delay, resources, communication, look ahead etc and other information in day to day working Timely delivery of project submissions including Resource Management Monitoring the budgets and additional scopes through Change Management Implementation of QA/QC procedures & compliance to ISO requirements Conducting design reviews for identifying the issues, assessing the progress, risks & plan for mitigation Keep Stakeholders well informed on the project status at regular intervals Managerial Responsibilities Leading a team of 10-12 planners, BIM coordinators and Design Managers Mentor and assist team members in career planning Work towards achieving team’s target billing ratio and budget hours by regular coordination with PBU counterparts and REC colleagues Ensure all REC delivery process and quality check procedures are followed Ensure the team is using efficient work process for the delivery and implement ways to enhance delivery efficiency Building a harmonious work environment and motivate team by being a role model Promote continuous development, enhance team competency and expand team capability through trainings Manage team members by setting performance and development goals and ensure overall team performance. Perform performance appraisals at regular intervals as set by REC. Provide HoD with required data for audits, Dept. KPIs, presentations, reports, etc. as and when required. Responsible for conducting interviews and grow team Qualifications Must possess B.Tech/ M.Tech in Civil/Structural/Transportation Engineering or Masters/ PG in Construction Management/ Project Management with 8-12 years of professional experience Should have preferably worked in similar role and have a very good understanding of the processes. Nordics experience would be an advantage. Sound knowledge of Design Management & Project Planning Must be highly competent in written and verbal English language Must possess sound knowledge on understanding Design Basis report. Should have an experience of delivering design packages for high value complex projects Must possess profound design experience in any of the building/ transport/ water market Should be passionate about engineering with an attitude of absolute intolerance for non-compliance in relation to people safety, environment or product quality. Should be committed to both their work and personal development, with a willingness to widen their experience and knowledge base. Should be able to work in a team and support, mentor and develop team members Working towards Chartered Engineer (CEng)/ PMP or able to prove progression towards Chartership/ Certification Should be a competent user of IT Tools in particular Word, Excel, Outlook, Powerpoint and scheduling and reporting tools like MS Project, Primavera P6, PowerBI etc. Desirable to have knowledge of one of the designing & collaboration tools like AutoCad Civil 3D, Navisworks, Bluebeam, MicroStation, etc. Should have an experience of managing a team of several planners, designers, evaluating individual design deliverables and overall team performance. Should also deliver critical feedback where needed and encourage team members throughout the duration of a project. Wider knowledge of other disciplines is highly desirable. Should be able to conduct design reviews for identifying issues & risks and thus plan for their mitigations. Should be well versed with Project Planning & Design Management work like Scheduling (Design & Project schedule), Project Tracking, Logical interlinking of activities, WBS, identifying Critical Path on the project. Should be able to coordinate with all Project members to gather project data and should efficiently convert it into Information & reports. Should be versed with Project reporting, Dashboards, Client instructions, Control & review plan, managing all communications as single point of contact for Project team. Should have supported Project manager/ Project team in implementing Project Management Systems and Project Control measures like Earned value Analysis and other Project control techniques. Additional Information Welcome to our Buildings division Ramboll is among the top 10 building designers in the world. Annually, we work on more than 10,000 building projects, and we combine local insights with a global network of bright minds with specialist expertise. Together, we challenge assumptions in the interest of creating more practical, sustainable and economic building designs. Ramboll in India Ramboll has more than 1,000 experts working across five offices in India applying their passion to deliver innovative solutions in markets as diverse as Buildings, Transport, Planning & Urban Design, Water, Environment & Health and Energy. Founded in Denmark, Ramboll is a people company. We invite you to contribute to a sustainable future working in an open, collaborative and empowering culture. How to apply Apply online. Attach your CV, cover letter and relevant documents showcasing why you are the right fit for the role, and when you are available to start. We look forward to receiving your application. Deadline.

Company Description About Ramboll Founded in Denmark, Ramboll is a foundation-owned people company. We have more than 18,000 experts working across our global operations in 35 countries. Our experts are leaders in their fields, developing and delivering innovative solutions in diverse markets including Buildings, Transport, Planning & Urban Design, Water, Environment & Health, Energy, and Management Consulting. We invite you to contribute to a more sustainable future working in an open, collaborative, and empowering company. Combining local experience with global knowledge, we together shape the societies of tomorrow. Ramboll in India Ramboll has more than 1,000 experts working across five offices in India applying their passion to deliver innovative solutions in markets as diverse as Buildings, Transport, Planning & Urban Design, Water, Environment & Health and Energy. Founded in Denmark, Ramboll is a people company. We invite you to contribute to a sustainable future working in an open, collaborative and empowering culture. Job Description Job Description We invite you to bring your strong knowledge of Public Health Engineering into play as you co-ordinate with Project Manager and Technical Manager/Principal Engineer and be primarily involved in delivering the scheduled tasks in the form of design calculations and drawings To succeed in this role you must possess B.Tech/ M.Tech in Mechanical Engineering. Are you our new Engineer - PHE - MEP? Click the apply-button to send your application. You will join our REC UK Team As our new Public Health Engineer, you will be part of a world class, innovation driven engineering design centre owned by an independent trust and its employees. REC is a highly sophisticated center of engineering excellence located in Gurgaon. Working in partnership with all our established offices globally, the Ramboll Engineering Centre (REC) is a center for excellence in design by offering optimized solutions to the rest of the organization. You will become part of our REC UK buildings team, collaborating with a close-knit team of Public Health Engineers both in the UK and India, specialising in the design of Water Services, Above and Below Ground Drainage and Fire Suppression systems. In your role, you will work across multiple sectors across the globe – from Antarctic Research Outposts to high-rise buildings to world leading hospitals. Based out of one of the regional offices, travel will be expected on occasion, to fulfil the needs of the projects you will be working on. You will be working with a multi-disciplinary UK Buildings Team including including Structures, Mechanical & Electrical Engineering, Facades and Acoustics. Your project teams may be as large as 30 people or as intimate as 2 or 3. Your key tasks and responsibilities will be: Calculation of Water Demand Calculation of Hot & Cold Water (including circulation), flow calculation, calculations, distribution systems (sizing, valves, pumps etc.), water heating systems, water storage systems Design of drainage system in the buildings gravity & pumped solutions. Design and Calculation of Hot water distribution System in the Building: Distribution pipes, Pumps, Heat exchangers, Material selection, Flow calculations, Pressure calculation, Pipe sizing, Control valves, stop valves, pipe insulation. Design and Calculation of Cold System in the Building: Distribution pipes, Pumps,Mixing loops, Material selection, Flow calculations, Pressure calculation, Pipe sizing, Control valves, stop valves, pipe insulation Design of water purification plant, including filtration, softening plus chlorination. Design and Calculation of Fire Water in the Building : Automatic sprinkler systems design, Fire hoses, Wet & Dry Risers. Grey / Black Water recycling system/plant design. Borehole water system design. Rainwater Design – Gravity and Siphonic Plan, undertake, coordinate, and monitor work on your projects Contribute to the overall design and delivery of projects, as a Public Health Engineer. Identify opportunities for digital automation, optimisation of building systems, interfaces and/or their component parts. Monitor the implementation of design throughout the entire project lifecycle, from initial concepts to completion. Liaise and interact with other UK Building Services teams Deliver projects from a wide range of sectors. Help manage technical risk, be aware of our scope of services and assist where necessary in fee proposals and resourcing. Provide pastoral care for the younger generation of Public Health Engineers in your local office. Proactively pursue continuous professional development including working towards chartership with a recognised institution, as well as promoting the field of Public Heath About you From the moment you start at Ramboll, we will support your personal and professional development so that you can continue to grow with the company. Whilst we look forward to supporting your continued learning and development, for this role we have identified some qualifications, skills, and capabilities that will set you up for success. These include: Previous experience with delivering and coordinating all aspects of project delivery (PHE bias) Forward thinking and enthusiastic about digital design innovation and ‘smart design’ in increasingly digitalized construction arena. Good technical knowledge in the field of Public Health and Fire Suppression, including Water Services, Above Ground Drainage (including Rainwater Disposal Systems). Some experience or interest in Below Ground Drainage (including SUDS) and Gas Services would be preferred. Proficient using Bluebeam, AutoCAD, Excel, Magicad and Revit. Experience using Microstation is preferred. You are an excellent communicator and possess the ability to make what is complicated, simple! You are technically diligent with a high attention to detail. Ideally have 5-8 years PHE experience Your starting point for constant growth From the moment you join Ramboll, we will support your personal and professional development so that you grow with the company. For this role, we believe your starting point is: Manage major aspects of the Plumbing / Public Health Engineering design of projects. Be responsible to both the Project Manager and the Technical Manager/Principal Engineer for the organization, production, and quality of the supervised work. Act as Plumbing / Public Health Lead/Sub-lead, depending on the scope of the project. Coordinate design efforts with all other groups and maintain project records. Ensure compliance with relevant standards and procedures. Prepare and participate in design reviews. Personal qualities that will help you succeed in this role include: experience working on UK projects with detailed knowledge of regional standards & regulations; a wide range of Public Health Engineering experience in the engineering service sectors including Hotel, Office, Residential, Commercial, sports facilities, healthcare facilities. Should be passionate about engineering with an attitude of absolute intolerance for non-compliance in relation to people safety, environment or product quality. Should have flexible attitude, able to work in an environment with frequently challenging timescales and can be relied on to meet deadlines. Should be committed to both their work and personal development, with a willingness to widen their experience and knowledge base. Must possess professional English language skills (written and verbal). Should be able to communicate clearly with drafting team by sketches. Should be able to work in a team and support, mentor and develop junior engineers. Qualifications Qualifications Qualification - M.Tech/B tech/B.E/M.E in Mechanical or equivalent Mandatory Skills required : Revit , AutoCAD, Excel, MagiCAD Experience Required : 5-8 years Additional Information What we can offer you Investment in your development Leaders you can count on, guided by our Leadership Principles Be valued for the unique person you are Never be short of inspiration from colleagues, clients, and projects The long-term thinking of a foundation-owned company Work at the heart of sustainable change Ramboll is a global architecture, engineering, and consultancy company. We believe that the purpose of sustainable change is to create a thriving world for both nature and people. So, that’s where we start – and how we work. At Ramboll, our core strength is our people, and our history is rooted in a clear vision of how a responsible company should act. Being open and curious is a cornerstone of our culture. We embrace an inclusive mindset that looks for fresh, diverse, and innovative perspectives. We respect, embrace, and invite diversity in all forms to actively cultivate an environment where everyone can flourish and realise their full potential. Ready to join us? Please submit your application. Be sure to include all relevant documents including your CV, cover letter, etc. Deadline: 7-June-20Thank you for taking the time to apply! We look forward to receiving your application. Equality, diversity, and inclusion is at the heart of what we do We believe in the strength of diversity and know that unique experiences and perspectives are vital for creating truly sustainable societies. Therefore, we are committed to providing an inclusive and supportive work environment where everyone can flourish and reach their potential. We welcome applications from candidates of all backgrounds and encourage you to contact our recruitment team to discuss any accommodations you need during the application process.

Hiring for a skilled Electrical Draughtsman to join our team! Key Responsibilities: Create detailed electrical drawings, layouts, and schematics using CAD software, ensuring accuracy and adherence to project specifications. Work closely with engineers and project teams to produce high-quality electrical designs and coordinate revisions as project requirements evolve. Ensure all drawings meet regulatory standards, safety codes, and quality requirements specific to electrical systems. Maintain organized records of all drawings, manage document revisions, and update layouts based on project changes or feedback. Qualifications: Diploma in Electrical Engineering or relevant technical certification. Proficiency in AutoCAD / MicroStation software, with experience in electrical drafting. Strong attention to detail and knowledge of electrical standards and codes. Excellent communication and collaboration skills. Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹30,000.00 per month Education: Diploma (Preferred) Experience: total work: 4 years (Required)

Job Tittle- SP3D-Electrical Designer Location-Navi Mumbai/ Gurgaon Year Of Experience- 7 to 15 Job Description Should be able to handle the following work Should have basic knowledge of electrical cable tray route, locating lighting fixtures, Support requirement. hands on experience in SP3D electrical software Preparation and checking of Material Take Off. (MTO) Updating the model as per vendor drawings. working on Micro station & Auto CAD. extract drawing in MicroStation Should be able to work on the inputs in the form of sketch or excel sheet Knowledge of Navis work review Experience in Chemical or industrial projects will be added advantage Interested candidates can share their resume below mention address Contact No-6267776090 Email id- purvi.samaiya@ipstechinc.com

It has been more than 60 years since SYSTRA has garnered expertise that spans the entire spectrum of Mass Rapid Transit System. SYSTRA India’s valuable presence in India roots back to 1957, where SYSTRA worked on the electrification of Indian Railways. Our technical excellence, holistic approach and the tremendous talent provides a career that puts people who join us at the heart of improving transportation and urban infrastructure efficiency. Understand better who we are by visiting www.systra.in Context In India, SYSTRA is an international consulting and engineering company operating in the fields of Metros, High Speed Rail, Railways, Roads, Buildings, Urban planning, and Water Infrastructure for public and private organizations. CTR – Regional Technical Centre of Systra India takes care of the international production of major projects at Systra Group level. CTR team has expertise in design of High-Speed Rail, Metro, Conventional Rail, Bridges, Highways, Depots, Stations and Transport Planning. Starting from Feasibility/Concept stage to Detailed Design to IFC/Shop drawings, the disciplines involved have experience of designing in accordance with various international codes and delivered projects across the world. CTR team has successfully delivered some major projects in UK, UAE, Tanzania, KSA, Australia, Canada and Denmark. One of the major achievements of India CTR team has been the design of HS2 project in UK. We played an instrumental role in delivering 3 major Sublots on HS2 with our teams proactively engaging with Front Office in UK and delivering beyond client expectations. This resulted in India team receiving many accolades from the contractor BBV and client HS2. CTR team in India is proficient in working on multi-disciplinary projects integrating Design, BIM and Drawing production in a seamless workflow incorporating different software. The technical and management teams within CTR get an opportunity to work and interact with other CTR teams within Systra Group from Paris, Poland, Dubai, Philippines and Brazil. Missions/Main Duties Lead the design, specification, and integration of low voltage systems in rail infrastructure projects, including power supply, lighting, cabling, communications, and auxiliary systems. Develop and review detailed LV designs, schematics, and documentation in compliance with Swedish Transport Administration (Trafikverket) standards and EU rail directives. Coordinate with multidisciplinary engineering teams (signaling, telecoms, civil, electrical, mechanical) to ensure seamless system integration. Provide technical leadership, mentoring, and training to junior engineers. Ensure clear communication and alignment on technical requirements. Ensure adherence to environmental and sustainability standards in all LV engineering work. Profile/Skills Bachelor’s or Master’s degree in Electrical Engineering, Rail Systems Engineering, or a related field. Minimum 7–10 years of professional experience in railway low voltage engineering, with significant work on rail infrastructure projects (preferably in Sweden or the Nordic region). Deep knowledge of LV systems for rail applications: station and trackside LV distribution, lighting, control panels, power supplies, UPS systems. Familiarity with Swedish and EU rail standards (e.g., Trafikverket requirements, EN 50122, EN 50123, EN 50126, EN 50129). Proven track record in leading LV design and integration for railway projects. Ability to use relevant design and documentation tools (Microstation, AutoCAD, Revit, BIM platforms, etc.). We commit to put people who join us at the heart of improving transportation and urban infrastructure efficiency. As we are growing, this is time to be a part of this challenging adventure. It’s not a job - it’s a career!

Knowledge in GIS applications (QGIS / ARCGIS / Microstation) will be an added advantage Must have good communication and interpersonal skills Should be willing to work in rotational shifts.experience with GIS applications including QGIS, ArcGIS, or MicroStation; this will definitely set you apart. Beyond technical skills, we value strong communication and interpersonal abilities to foster a collaborative environment. This role involves working in rotational shifts, so a willingness to adapt is key.Mapping Engineer to join our team in Noida. If you have experience with GIS applications like QGIS, ArcGIS, or MicroStation, that's a big plus! You'll need excellent communication and interpersonal skills and the ability to work in rotational shifts.

Date 16 Jul 2025 Location: Mumbai, MH, IN Company Alstom At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling, and digital mobility, we offer our diverse customers the broadest portfolio in the industry. Every day, 80,000 colleagues lead the way to greener and smarter mobility worldwide, connecting cities as we reduce carbon and replace cars. Could you be the full-time Project Technical Interface Manager in [Mumbai] were looking for Your future role Take on a new challenge and apply your expertise in managing technical interfaces within a project in a cutting-edge field. Youll work alongside collaborative, forward-thinking, and solution-oriented teammates. You'll play a critical role in ensuring the seamless integration of external interfaces, from identifying needs to supporting commissioning activities. Day-to-day, youll work closely with teams across the business (Project Management, Engineering, Installation, and Testing teams), liaise with external contractors and partners, and facilitate communication to resolve complex technical challenges. Youll specifically take care of managing interface specifications and design documents, as well as maintaining an interface matrix and integration strategy, but also oversee the interface change process and ensure timely client acceptance milestones. Well look to you for: Supporting the engineering team by providing on-site information and clarifications as needed Managing the on-site list of issues with clients and internal teams Supervising and coordinating all external interface-related issues Acting as the key contact for interfacing contractors, such as track, power supply, rolling stock, and communications Establishing effective communication channels to resolve interface issues Producing interface-related documentation, including meeting minutes and interface specifications Validating the implementation of interface specifications during system commissioning Carrying out site surveys to assess project needs All about you We value passion and attitude over experience. Thats why we dont expect you to have every single skill. Instead, weve listed some that we think will help you succeed and grow in this role: Engineering degree or equivalent industrial experience 10+ years of experience in system signalling engineering, preferably CBTC-based signalling Demonstrated knowledge of CBTC signalling technology, system design, integration, or commissioning Strong analytical and problem-solving skills with a system-minded approach Resilience and the ability to work under pressure Proficiency in Microsoft Office (including Excel) Excellent communication and interpersonal skills for interfacing with diverse stakeholders Ability to identify critical tasks and ensure timely execution and follow-up Fluency in English Things youll enjoy Join us on a life-long transformative journey the rail industry is here to stay, so you can grow and develop new skills and experiences throughout your career. Youll also: Enjoy stability, challenges, and a long-term career free from boring daily routines Work with cutting-edge standards for rail signalling Collaborate with transverse teams and supportive colleagues Contribute to innovative projects that shape the future of mobility Utilise our flexible and inclusive working environment Steer your career in whatever direction you choose across functions and countries Benefit from our investment in your development through award-winning learning opportunities Progress towards leadership roles or other technical specialisations Benefit from a fair and dynamic reward package that recognises your performance and potential, plus comprehensive and competitive social coverage (life, medical, pension) You dont need to be a train enthusiast to thrive with us. We guarantee that when you step onto one of our trains with your friends or family, youll be proud. If youre up for the challenge, wed love to hear from you! Important to note As a global business, were an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. Were committed to creating an inclusive workplace for everyone.

As a leading Engineering, Procurement, and Construction (EPC) company at the forefront of Indias energy transition, Hartek Group is committed to building a sustainable and powerful future. Our significant impact on the nations infrastructure is demonstrated by connecting over 10 GW of solar power to the national grid and successfully executing more than 350 high-voltage substation projects. In addition to our project work, we manufacture advanced power distribution solutions that are essential for creating a smart and reliable grid. Recognized as a six-time Great Place to Work certified organization, we invite dedicated professionals to join our team and help us in our mission of "Making the Future Powerful." Key Skills AutoCAD Substation & Switchyard Design Electrical Drafting Single-Line Diagrams (SLD) General Arrangement (GA) Drawings Schematics & Wiring Diagrams Earthing Layouts IEC/IS Standards Bill of Materials (BOM) Overview Skilled Electrical Draftsman with experience in preparing accurate drawings for substation projects up to 132kV. Proficient in AutoCAD and well-versed in creating SLDs, GA drawings, protection schematics, and cable schedules. Strong understanding of substation layouts, electrical standards (IEC/IS), and coordination with design and site teams. Focused on quality, compliance, and timely documentation throughout the project lifecycle. Roles & Responsibilities Develop detailed electrical drawings, single-line diagrams, wiring diagrams, and schematics for substations. Create general arrangement (GA) layouts, panel layouts, and cable routing diagrams. Prepare earthing and lightning protection system layouts. Work closely with electrical engineers to ensure designs meet technical and functional specifications. Coordinate with project managers, site teams, and other stakeholders to incorporate revisions. Ensure designs adhere to relevant industry standards (e.g., IEC, IEEE, and local regulations). Maintain compliance with safety and quality standards. Maintain and update project documentation, including revisions and as-built drawings. Prepare bill of materials (BOM) based on the drawings. Utilize computer-aided design (CAD) software such as AutoCAD, MicroStation, or equivalent. Work with electrical design tools for substation modeling. Identify and resolve discrepancies in drawings or technical documentation. Support troubleshooting by providing accurate design details. Competancy / Tool System Sustation Switchyard Detail Design Engineer 220 KV 765KV AutoCad Choose a file/drag & drop it here PDF,DOC,DOCX up to 10MB Thank you for applying! We have received your application and appreciate your interest in joining the Hartek team. Our team will review it, and if youre a good fit, we will reach out soon.

The Selected Candidate Will Be Responsible For Model and drawings of building services elements. Basic design calculations. Duct & pipe sizing. Knowledge of LODs & BSRIA standards. Quantities take off based design drawings. Carrying out checking of drawings. Coordination between other MEP disciplines, such as Electrical, Plumbing services. Work within time limits to complete deliverables on time Candidate Specification Be a degree holder in Mechanical/Refrigeration and AC or equivalent in respective engineering discipline. Be proficient in drafting of HVAC systems, ducting and piping design , plant room layout, sections etc. Should have 5 to 10 years of experience in relevant design software such as MicroStation/Open building design, REVIT, BIM 360, knowledge in Dynamo is preferred. Good communication skills and a professional attitude towards work , be a team player and have multi-disciplinary co-ordination skills We Can Offer (subject To Company’s Policy) Agile and safe working environment Competitive annual leave and sick leaves Group incentive scheme Group term life insurance, Workmen’s compensation and Group medical insurance coverage Short and Long-term Global employment opportunities Global collaboration and knowledge sharing Digital Innovation and Transformation Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute. Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments. We embrace agility, flexibility and trust. Location(s): Noida, UP, IN Mumbai, MH, IN Bengaluru, KA, IN Contract Type: Permanent Work Pattern: Full Time Market: Buildings Discipline: Building services Job Ref: 8683 Recruiter Contact: Deiveegan Eshwaran

Role & responsibilities Create detailed electrical design layouts, update schematics, SLDs preparation for metering & protection. Candidate must be able to handle 2-3 draftsman, guide them & must have working experience in below Electrical activities: Cable tray layouts, power layouts, detail drawings, coordination with CSA for supports. Lighting system design, layouts, DB schedule, circuiting, Fixture selection as per classified area. Single line diagrams, schematics preparation. Electrical equipment layout, Grounding layout, Lightning protection layout. CCTV/ Access control/ Telephone/ Public address layouts. Exposure to Hazardous area requirements. Electrical BOQ/ BOM Preparation. Coordination with other disciplines, IDC, 3D model update. Autocad / Microstation / Revit / SP3D / 3D Modelling tools

We are Hiring Electrical Design Engineer!! Join us and become a part of a transformative Team!! 🎓 Education: B.E Electrical Engineering or similar. 💼 Experience: 3-8 years 📍 Location: Hosur, Tamil Nadu, India (Work from Office) 🕒 Employment Type: Full-Time 📅 Workdays: 5 working days No.of Openings: 3 ** Candidates who are willing to consider relocation to Hosur are encouraged to apply. ** Main Duties and Responsibilities · Work in the areas of water systems and treatment plant electrical evaluation, modelling and design, master planning and project delivery. · Design electrical systems and role out plans for typical applications being data centres, medical water systems, municipal, industrial, Pharma, and recycling water systems with payback evaluations. · Coordinating and adjusting the work effort within the project team to ensure project work is completed on schedule and within allocated budget. · Designing electrical systems and developing electrical schematics, single line diagrams (SLDs), load calculations, cable sizing, earthing and lightning protection systems, control panel layouts, motor control centers (MCCs), power control centers (PCCs), Variable Frequency Drives (VFDs), Programmable Logic Controller (PLC) panels, conduit routing, and wire schedules. · Coordinating with other engineering disciplines (process, mechanical, civil, instrumentation) to ensure integrated design and smooth project execution. · Preparing detailed technical specifications, datasheets, Bills of Quantities (BOQs), and reports for procurement and construction. · Reviewing vendor documents, ensuring compliance with specifications, and providing technical support during procurement and installation. · Ensuring all electrical designs adhere to relevant national and international standards like IS/IEC, NFPA, IEEE, NEC, UL, CSA, NFA. · Providing support during installation, testing, and commissioning phases, and troubleshooting electrical issues. · Identifying and proposing cost-saving measures and working within project timelines and budgets. · Exploring and implementing new technologies to improve system efficiency, reliability, and sustainability. · Promoting and enforcing safe working practices and adhering to HSE regulations and industry standards. · Industrial plants use high-power machinery, requiring specifically designed electrical systems to handle the load without compromising safety or continuity. · Seamless integration with control systems, automation technologies like programmable logic controllers (PLCs), and robotics to streamline production processes. · Strong understanding of electrical power systems, control systems, instrumentation, and automation, preferably within the water treatment industry. Required Experience & Qualifications: · Degree or equivalent qualification in Electrical Engineering Minimum 3 years’ Experience in designing electrical systems is essential with design emphasis on the Data Centre, Industrial, Municipal and Pharma sectors being an advantage · Software Proficiency: Electrical design tools (e.g., ETAP, Power Factory) · Strong communication skills as the position will require presentations to clients. · Must exhibit strong project management skills. · Experience working in a multi-disciplinary team in developing conceptual, feasibility, and final designs for a wide variety of water treatment projects. · Familiarity with relevant electrical codes, standards, and regulations. · Ability to analyse complex electrical system requirements, perform calculations, identify potential issues, and propose effective solutions. · Strong detail-oriented work style, and an accommodating and proactive attitude. Experience with CAD software (e.g., AutoCAD, Revit, MicroStation) would be advantage Professional Engineer (PE) license or equivalent certification is an added advantage. Share your updated resume to hr@ses-td.com

About Company: Chemionix is a Mumbai-based ISO Certified engineering consultancy, delivering affordable solutions in India and internationally. We’ve worked on projects across the USA, Australia, UK, Brazil, Singapore, KSA, UAE, and South Africa. We work along in a team of 100+ highly experienced and qualified engineers and we contribute to providing design services for 100+ International clients. Location: Goregaon, Mumbai. Experience : 0 - 2 years. Role Overview:We are looking for a passionate graduate Chemical/ Mechanical & Electrical Engineer to join our team. This is a great opportunity to gain hands-on experience in Piping (P&ID), Auto CAD, Revit ,skills development & related engineering tasks. 1. Chemical & Mechanical Engineer: Requirements: · Educational Background: Degree in Mechanical & Chemical Engineering. · Software Skills: P&ID software tools (e.g., AutoCAD P&ID etc.) · Communication Skills: Strong verbal and written communication skills to effectively collaborate with team members and clearly present P&ID information. · Problem-Solving Abilities: Demonstrated ability to analyze complex processes and propose practical solutions within P&ID development. · Adaptability: Willingness to learn and adapt to new technologies, tools, and engineering practices related to P&ID design and piping engineering. · Time Management: Good organizational skills and ability to prioritize tasks to meet project deadlines. · Enthusiasm: A passion for engineering, particularly in the field of P&ID development, and a strong desire to contribute to the success of projects. Responsibilities: · P&ID Development: Work closely with the engineering team to create and modify Piping and Instrumentation Diagrams (P&IDs) using specialized software, ensuring accurate representation of all components and systems. · P&ID Symbols and Legends: Assist in maintaining a comprehensive library of P&ID symbols and legends, ensuring consistency and adherence to industry standards. · P&ID Reading: Learn to read and interpret P&IDs accurately, identifying various piping components, equipment, instrumentation, and their interconnections within the system. · Geotagging: Assist in geotagging and align reality capture information with P&IDs and accurately represent the physical locations of components and systems. · P&ID Revalidation: Collaborate with the team to review and validate existing P&IDs against actual installations, making necessary updates and improvements. · Documentation: Prepare and maintain accurate and up-to-date P&ID documentation, including reports, technical data, and progress updates related to P&ID development. · Troubleshooting: Collaborate with the team to troubleshoot and resolve any discrepancies or issues identified in existing P&IDs during project execution. · Continuous Improvement: Proactively research and propose innovative approaches to enhance P&ID practices, improve symbol representations, and optimize system understanding. 2. Electrical Engineer: Job Details: The ability to work in a variety of construction environments including commercial, Educational, industrial and health care, residentials related projects - Manage and Coordinate project deliveries. Understanding on Electrical Services (Electrical & ELV) from concept stage to detail design stage. Estimation/Designing of drawings of Electrical Services (Conduits, Raceways, Cable tray, Lighting, Power Layout, Single Line Diagram (SLD), Earthing Layout, Lightning Layout plan and section, and its installation details) and ELV (Electrical Low voltage) – CCTV, PA, Fire Alarm, Access Control System and Intrusion Detection System, Data & Telecommunication, Voice Communication, Digital Signage System. Understanding/Development of Drawings for Sub-Station. Well versed and good experience in handling AutoCAD / Microstation / Revit / MS office software. Good Communication skills. What We Offer : · Real-World Experience: Work on live projects from day one. · Learning Opportunities: Get trained on tools like AutoCAD, Plant 3D, Recap and Customized Application for App Tagging and P&ID revalidation. · Supportive Environment: Be part of a friendly and diverse team. · Growth: Learn directly from experienced professionals. · Best HR Practices · Training to compete and achieve · Paid Leaves, Bonuses, Overtime · Provident Fund, Health Insurance, Gratuity · Work Life Balance · Fixed Shift with Sundays and Alternate Saturdays Off. · Potential candidates can earn up to 3.5 lacs per annum. Don’t miss this opportunity to take the first step in your career. Let’s build the future together...!

You will be responsible for creating detailed drawings such as Installation Plans, Section Details, and System Diagrams for Commercial, Residential, or Hospitality projects using 2D and 3D CAD software. The drawings will be based on project specifications, sketches, and verbal instructions. You will also interpret technical drawings and schematics and convert them into PDF files. In addition, you will be required to derive calculations and Bill of Quantities (BOQ) for projects in the formats required by the team. It will be your responsibility to maintain drawing standards, ensuring the accuracy and completeness of all deliverables. Furthermore, you will provide technical support and troubleshoot CAD-related issues. Keeping yourself updated with new and widely used software in the AEC (Architects, Engineers, Consultants) community and learning how to utilize them for high-quality document outputs will be essential. To be successful in this role, you must be proficient in CAD software such as AutoCAD, SolidWorks, Revit, MicroStation, or similar tools. You should have a minimum of 3-5 years of experience in the building construction industry, with a primary focus on creating electrical and coordinated drawings and documents for projects. A strong knowledge of studying, creating, and modifying 2D/3D Electrical drawings in ACAD and other related software is required, with at least 3 to 4 years of practical similar experience. Additionally, familiarity with MS Office applications such as Word, Excel, PowerPoint, Outlook, and other related software is necessary. Fluency in understanding and speaking English is also a prerequisite for this position.,

About Us: emew India Private Limited is a part of the global emew Corporation, a leading innovator in clean technology solutions for sustainable metal recovery. emew India plays a vital role in delivering cutting-edge technologies for the efficient and environmentally responsible recovery of valuable metals. Job Summary: We are seeking a highly skilled and experienced AutoCAD Plant 3D Designer to join our plant engineering team. The ideal candidate will be responsible for developing detailed 3D models and designs of industrial plants, including piping, equipment, and structural elements, using Autodesk Plant 3D software. This role requires a strong understanding of plant design principles, industry codes, and the ability to collaborate effectively with cross-functional engineering teams. Key Responsibilities: Create and modify detailed 3D models of industrial plant components, including piping, equipment (pumps, vessels, heat exchangers, etc.), steel structures, and civil elements using AutoCAD Plant 3D. Develop comprehensive 2D drawings from 3D models, including Piping & Instrumentation Diagrams (P&IDs), General Arrangement (GA) drawings, isometric drawings, equipment layouts, and pipe support drawings. Generate Bill of Materials (BOM) and Material Take-Off (MTO) reports directly from the 3D model. Interpret and apply engineering specifications, P&IDs, vendor drawings, and other technical documents to ensure accurate and compliant designs. Participate in 3D model review sessions (e.g., using Navisworks) and incorporate feedback from various disciplines (process, mechanical, civil, electrical, instrumentation) to resolve clashes and optimize designs. Ensure all designs comply with relevant industry standards, codes, and regulations (e.g., ASME, ANSI, local Indian standards). Collaborate closely with process engineers, mechanical engineers, civil engineers, and other project stakeholders throughout the project lifecycle to ensure seamless integration of design elements. Prepare and update project documentation, including drawing registers, design change notices, and technical reports. Troubleshoot and resolve design-related issues, providing technical support and guidance as needed. Maintain up-to-date knowledge of AutoCAD Plant 3D software advancements, industry best practices, and new technologies in plant design. Assist in setting up new projects within Plant 3D, managing libraries, and catalogues. Perform site visits for as-built measurements and field verification as required. Qualifications: Diploma or Bachelor's degree in Mechanical Engineering, Proven experience (typically 3-7+ years) as an AutoCAD Plant 3D Designer in the industrial plant engineering sector (e.g., Oil & Gas, Petrochemical, Chemical, Power, Water Treatment). Expert proficiency in Autodesk AutoCAD Plant 3D, including 3D modelling, P&ID creation, isometric generation, and report extraction. Strong understanding of piping design principles, including pipe routing, support design, nozzle orientation, and material specifications. Familiarity with various piping components, valves, and their respective standards. Experience with 3D model review software such as Autodesk Navisworks, Inventor. Ability to read, interpret, and develop P&IDs, Process Flow Diagrams (PFDs), and other engineering schematics. Excellent attention to detail and a commitment to producing accurate and high-quality designs. Strong problem-solving and analytical skills. Effective communication and interpersonal skills, with the ability to collaborate effectively in a team environment. Ability to work independently and manage multiple tasks simultaneously to meet project deadlines. Proficiency in Microsoft Office Suite (Word, Excel, Outlook). Knowledge of other CAD software (e.g., AutoCAD 2D, MicroStation, PDMS, CAD Worx, SP3D) is a plus. Preferred Skills (Nice to Have): Experience with Plant 3D Spec Editor. Understanding of civil, piping, electrical and structural design principles for plant layouts. Familiarity with local International construction codes and regulations. Experience with BIM (Building Information Modelling) concepts. Benefits: List company benefits such as health insurance, paid time off, professional development opportunities, etc. To Apply: Interested candidates are invited to submit their resume and cover letter to prasad.rokade@emew.com, Please include "AutoCAD Plant 3D Designer - [Your Name]" in the subject line. Early joining will be appreciate.

Piping Designer Qualification : Diploma In Mechanical Engineering Work experience: 5 - 10 Years (Experience in Offshore Project is Mandatory) Technical Skills Coordinate team of Piping and Layout Draftsmen in order to carry out the Piping and Layout part of the installations under responsibility of the project Piping and layout leader or piping engineers Design, execute or check the typical Piping and Layout studies including 3D model review with other disciplines and issue of clash check report Construction or design drawings using 2D software or extracted from 3D for piping networks (overall plot plan, equipment layout drawings, piping general arrangement, piping isometrics and piping supports) Analyse, within his area of responsibility, criticalities in 3D Model development and propose recovery activities Experience in EPC of Offshore Platforms Software skills: PDS/PDMS/SP3D, AUTOCAD, MICROSTATION