Role & responsibilities LIDAR Data Processing: Perform point cloud classification, feature extraction, and data analysis using LIDAR technology. Utilize Terra Scan and Terra Match for data calibration, noise filtering, and accurate alignment. Quality Control and Assurance: Ensure data accuracy and compliance with project specifications. Conduct thorough quality checks using Terra Model and other tools. Collaboration and Communication: Collaborate with surveyors, data analysts, and GIS specialists for project deliverables. Provide technical support and resolve challenges during the data processing lifecycle. Project Management Support: Manage timelines effectively and ensure deliverables meet client expectations. Maintain clear documentation of data processing steps and methodologies. Software Utilization: Apply expertise in Terra Photo for visualization and 3D modeling. Develop best practices for LIDAR data processing and storage. Preferred candidate profile Candidates with prior experience in the geospatial or mapping industry. Strong understanding of LIDAR data and point cloud analysis. Problem-solving skills and attention to detail. Ability to work independently and within a team. Effective communication and collaboration skills. Perks and benefits Opportunities for continuous learning and upskilling in the latest LIDAR technologies. Hands-on experience with industry-leading software tools. Career growth opportunities within the geospatial industry. Collaborative work environment with experienced professionals. Access to internal training and knowledge-sharing sessions.

The Selected Candidate Will Be Responsible For Model and drawings of building services elements.Basic design calculations.Duct & pipe sizing.Knowledge of LODs & BSRIA standards.Quantities take off based design drawings.Carrying out checking of drawings.Coordination between other MEP disciplines, such as Electrical, Plumbing services.Work within time limits to complete deliverables on time. Candidate Specification Candidates must haveminimum of 5 years of relevant experience.Be a degree holder in Mechanical/Refrigeration and AC or equivalent in respective engineering discipline.Be proficient in drafting of HVAC systems, ducting and piping design , plant room layout, sections etc.Have good experience in relevant design software such as MicroStation/Open building design, REVIT, BIM 360, knowledge in Dynamo is preferred.Good communication skills and a professional attitude towards work , be a team player and have multi-disciplinary co-ordination skills. We Can Offer (subject To Company’s Policy) Agile and safe working environment Competitive annual leave and sick leaves Group incentive scheme Group term life insurance, Workmen’s compensation and Group medical insurance coverage Short and Long-term Global employment opportunities Global collaboration and knowledge sharing Digital Innovation and Transformation Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute. Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments. We embrace agility, flexibility and trust. Location(s): Noida, UP, IN Mumbai, MH, IN Bengaluru, KA, IN Contract Type: Permanent Work Pattern: Full Time Market: Buildings Discipline: Building services Job Ref: 7796 Recruiter Contact: Deiveegan Eshwaran

${jobpostDetails.jobAd.sections.jobDescription.text } Qualification ${jobpostDetails.jobAd.sections.qualifications.text } Additional Information ${jobpostDetails.jobAd.sections.additionalInformation.text }

Libra Process Tech is looking for Piping PDS Designer to join our dynamic team and embark on a rewarding career journey. Creating visual concepts and designs for a wide range of media, including websites, print materials, social media, and marketing campaigns Collaborating with clients and other team members to understand project requirements and objectives Developing detailed design plans and sketches, and creating digital mock-ups and prototypes Utilizing design software such as Adobe Creative Suite to create high-quality designs Presenting design concepts and prototypes to clients and stakeholders for feedback and approval Revising and iterating on designs based on feedback and client requirements Managing multiple design projects and meeting deadlines Staying up-to-date with the latest design trends and techniques Providing guidance and support to junior designers and other team members as needed Maintaining a high level of professionalism and ethical conduct in all interactions with clients and team members.

Libra Process Tech is looking for Piping Microstation Designer to join our dynamic team and embark on a rewarding career journey. Creating visual concepts and designs for a wide range of media, including websites, print materials, social media, and marketing campaigns Collaborating with clients and other team members to understand project requirements and objectives Developing detailed design plans and sketches, and creating digital mock-ups and prototypes Utilizing design software such as Adobe Creative Suite to create high-quality designs Presenting design concepts and prototypes to clients and stakeholders for feedback and approval Revising and iterating on designs based on feedback and client requirements Managing multiple design projects and meeting deadlines Staying up-to-date with the latest design trends and techniques Providing guidance and support to junior designers and other team members as needed Maintaining a high level of professionalism and ethical conduct in all interactions with clients and team members.

We are specifically looking for candidates with direct experience in Transformers or Switchgear, with a minimum of five years in the field. Preferred candidates should come from companies such as: ABB, Siemens, Schneider Electric, AVEVA, ETAP, PLANON, Rockwell Automation, Honeywell, Johnson Controls, GE, Hitachi, El Sewedy Electric, and Alfanar. Design Engineer Electrical & Instrumentation (Power Control Room) Location : Chennai India Level : Design Engineer Experience : 5 yrs Job Description: Technical activities related to Electrical Design, Engineering of HV/MV/LV PCR (Power control Room/Substation/E-House) by using various software, including but not limited to the following: To yield a safe, quality & cost-effective design/product in a timely manner as per clients requirements. To study and comply with required standards & specifications, etc. To perform and prepare HV/MV/LV Substation Electrical & Instrumentation design calculations including Lighting, Grounding, Shielding, Battery & Battery charger sizing. Station service transformer sizing & relevant drawings/documents. Prepare Electrical layout drawings (General Equipment Arrangement, lighting, shielding, cable routing, etc.) Perform interfacing, design review and validation of PSA, DCS, Fire Alarm, Communication, Data and Telephone System. Prepare Bill of Material, Documents and Drawings, etc. Select and evaluate related to Material & Components, e.g. lighting fixtures, Panel boards, HV/MV/LV cables, MCTs, grounding busbars, shielding mast, surge arrest, etc. Perform technical evaluation for the quotations of electrical equipment / materials and placing the purchase orders. Provide technical support and product cost sheets to the Sales Engineer. Work Experience: Direct work experience of minimum 5 years in the field of Electrical & Instrumentation Design/Engineering of HV/MV/LV Substation for the utility or Oil & Gas Industry (e.g. National Grid / Saudi Electricity Company, Saudi Aramco, Sabic, Royal Commission similar, etc.) Power System Protection & Control by using various Design/Engineering Software, i-eDilux, ETAP, Multigrid etc. and AutoCAD / MicroStation, etc. Required Skillset: Technical knowledge / expertise related to Electrical Design/Engineering of HV/MV/LV Substations, Strong skills in Design application software & AutoCAD / MicroStation, Proficient in English language. Strong knowledge of requirements of various equipment / systems in the Substation, like HVAC, Fire Alarm, Fire Fighting, etc.; and good knowledge of International Technical Standards (ANSI/IEC/UU/ASTM/NEMA/DIN/NFPA/SASO, etc.) Conversant with ISO/QMS/EMS functions and documentation. Education: BS/BE/BTech Electrical / Electronics / Instrumentation / Communications / Mechatronics Engineering

We deliver the world s most complex projects. Work as part of a collaborative and inclusive team . Enjoy a varied & challenging role. Building on our past. Ready for the future Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia. Right now, we re bridging two worlds as we accelerate to more sustainable energy sources, while helping our customers provide the energy, chemicals and resources that society needs now. The Role As a Mechanical Designer with Worley, you will work closely with our existing team to deliver projects for our clients while continuing to develop your skills and experience etc . The Role Mechanical designers with Mechanical Department of a consultancy organization and/or technical services department of a Metal / Mineral / Chemical Processing plant. Knowledge of Cu/Al smelting plant will be an added advantage. Capable to work independently and should have worked as Lead Designer in at least 4-5 projects with a mechanical team of 4-5 people. Capable to handle large or medium scale project and responsible for technical, quality and schedule. Hands on Basic & Detailed Engineering Experience consisting of Bulk Material Handling & Conveyors for Indian/Australian / European / Overseas projects. Hands on Experience in Plant Layout and Plot Plan, General Arrangement of Process buildings, Conveyor, Transfer tower etc. Hands on Experience in component level detail/ shop engineering for any kind of material handling plant including fabrication drawings for Chutes, Frames, Technological Structures etc. Hands on Experience on ducting layout & drawing will be added advantage. Good Knowledge of Material Science and should be conversant with national, international codes and standards, like ASME / API / BS / EN etc. Knowledge of 2D software like AutoCAD, MicroStation and 3D software like S3D, E3D, Inventor, Autodesk Plant 3D etc. Experience in Microstation 3D will be desirable add on. Orientation to working in workshare environments with overseas office. Good communication skills, verbal and written to communicate with client and overseas offices. About You To be considered for this role it is envisaged you will possess the following attributes: A degree/diploma in Mechanical engineering from a reputed university. Total 10 to 15 years of experience in Engineering and Design, preferably with engineering consultants/contractors or from clients side. Good Presentation Skills. Good spoken and written English language skills, communication skills and interpersonal skills. Mention any professional affiliations/certifications. Should be open for short travel and deputation to sites/ Overseas Offices where required. Mention near term mobility readiness Moving forward together Whatever your ambition, there s a path for you here. And there s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. Worley takes personal data protection seriously and respects EU and local data protection laws. You can read our full Recruitment Privacy Notice Here. Please note: If you are being represented by a recruitment agency you will not be considered, to be considered you will need to apply directly to Worley. Requisition ID: KOL00H7 Organization: Asia China

Job Description Join Us! We combine AtkinsR alis project management expertise and Hitachi Energy s deep technological knowledge to create a company dedicated to substations - we are Linxon! The Electrical Designer - OPC will work on AUTOCAD / Microstation platforms for project/Tender specific activities assigned to the OPC group along with skilled team on a wide range of international T&D substation projects. Individual contributor using prior theoretical learning or knowledge of methods and technologies to execute work assignments using established solutions. The position provides design for engineering discipline across multiple engineering projects within the OPC. Complete the assignments on multiple projects of moderate size or portions of major projects, cost-effectively and in accordance with contract specifications, quality standards. Highest quality standards are applied, and safety requirements are taken into consideration. What will you do Independently work CAD platform for the 2D design and detail engineering of substation. 3D hands on gave advantage Develop the tender engineering drawings in short time period with quality. Secure the completeness of the assigned packages and correct function of the resulting substation system. Confirm the engineering is developed, taken into consideration the complete information and all inter discipline checks has been conducted, the results are documented in the project specific storage area. Solves the cad issues that appear during engineering development. Focus on cost-efficient system solutions. Report and keep records for all engineering changes. Cooperate with the engineering team and agree on the project specific impacts, caused by the changes. Ensure compliance with Linxon and Client engineering guidelines, standards and quality across the complete engineering process. Creates work plans and cost estimates in own area of responsibility. Contribute to the Up-to-date design issue log. Safety - Understand and follow Linxon OHS procedures and guidelines. Participate at design reviews. Provide input for close out report and lessons learned, and follow/review lessons learned for next projects. Experience, Education and other Required: 5-8 years of experience in substation design and drafting with AutoCAD expertise. Diploma in Electrical and Electronics Engineering. Sound knowledge on AutoCAD tools. Add advantage for Microstation/Revit knowledge. Hands on experience on AutoCAD 2d platforms. Sufficient speed in design Overall engineering design experience secondary engineering in GIS or AIS substation is required. Hands on experience in HV Substation secondary engineering drawings. Add advantage who has electromechanical Design drawings preparation Looking for Secondary CAD designer, who has experience in UK market is an advantage What we offer: In return, we offer a wide range of rewards and benefits, 20 days Privilege Leave, 13 days Emergency leave and 14 Public holidays per year Medical Insurance, Life Insurance and Career Progression We also have a brilliant smarter working policy, too. That means many of folks are able to either work from home or as part of our hybrid model. When it comes to diversity and inclusion, we see things differently at Linxon - we encourage applications from people of all races, ages, genders, religions, sexual orientations and more - so whoever you are, we hope you ll see things our way, too. About Linxon Shaping energy solutions to empower sustainable connectivity. We combine AtkinsR alis project management expertise and Hitachi Energy s deep technological knowledge to create a company dedicated to substations - we are Linxon. Linxon s vision is to deliver the best market offering for turnkey substation projects through world-class power technologies and delivering the highest level of competence in managing infrastructure projects. As a leading engineering company, we help our customers with turnkey substation solutions in the field of power transmission, renewable energy, and transportation. In this role, you will have the opportunity to be part of a new company as it evolves and help shape it for the future. If you like new challenges, have an entrepreneurial spirit, and are interested in working with other motivated professionals with expertise in the Substations EPC business, then this is the new opportunity for you. To know more about the Linxon please click on the link below. Building the infrastructure to power the world - we are Linxon! - YouTube Worker Type Employee Job Type Regular At Linxon, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences.

As an Arcadian, you already help us deliver world leading sustainable design, engineering, and consultancy solutions for natural and built assets. You are part of our global business comprising 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can continue to solve the world s most complex challenges and deliver more impact together. Role Description This role is part of Arcadis Global Excellence Centre (GEC) and will join our 3,000+ talented individuals working in India, Romania, and Philippines, in partnership with Arcadis offices globally. The GEC brings key capabilities and capacity to support our clients seamlessly around the world. For those in GEC there are options to be dedicated to one country; developing deep knowledge and strong relationships, as well as opportunities to be part of teams working truly globally as a centre of excellence, offering diversity and variety. Arcadians are by nature, globally minded and culturally aware, and Arcadis strongly believes in flexibility which enables change over time as your career progresses. The GEC model is well embedded in Arcadis, and the strong relationships that exist between our global offices are truly unique. Role Accountabilities: As a BIM Modeller - Mechanical in our Global Excellence Centres (GEC), you will play a major role and will be part of Rail System Group under Rail which is one of Global Business Areas (GBA). You will be reporting to Principal BIM Modeller and Senior BIM Modeller. You will also collaborate with the lead regions and stakeholders on a regular basis. You will manage the delivery of the projects to meet time, quality, budgetary and health and safety targets Good knowledge of the fundamentals in their core discipline Possess excellent working experience in Revit / Bentley AecoSim / Microstation and ProjectWise / Navisworks / BIM 360. Should be able to work independently taking full responsibility of the project, liaise with Engineers and BIM manager Revit skill and wider MEP knowledge is an advantage Nice to Have Should have programming skills Should appreciate site construction issues and provide practical buildability solutions. Should be able to develop automation and standardisation. Learn and apply BIM Technologies and emerging technology. Qualifications & Experience: BE/Btech/Diploma Why Arcadis We can only achieve our goals when everyone is empowered to be their best. We believe everyones contribution matters. It s why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You ll do meaningful work, and no matter what role, you ll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why equality and inclusion is at the forefront of all our activities. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity employer; women, minorities, and people with disabilities are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, caste, creed, colour, religion, sex, age, disability, marital status, sexual orientation, and gender identity. #JoinArcadis #CreateALegacy #Hybrid #LI-MS4

Role & responsibilities Preparation and understanding of UOPs Basic Mechanical engineering design package for UOP process technologies and detail design of propriety internals for the technologies that are supported by UOP ( Sch A design) Coordinating and providing support for any customer queries and its resolution. The engineer will be assigned as a team member to multiple contracts at any given point in time. She/ he will be the prime responsible point of contact for internal technical matters related to predominantly Reactors/ Regenerators / Pressure vessels, other static equipment. He/she shall closely collaborate with the other team members from disciplines such as Process, Piping, Mechanical, CAD-design, Management and Project Management. Design and detail engineering of pressure vessels as per international codes such as ASME Sec VIII Div 1 and Div 2/API standards etc as applicable. Design and fabrication requirements of pressure vessels and should have good knowledge of fabrication methods and design constraints. Involved in static equipment inspection / manufacturing is desirable. Static analysis using latest computational methods viz FEA , code based calculation. Familiarity with CFD will be plus Checking/Reviewing drawings to ensure complete compliance with customer requirements, design calculations and code requirements. Providing deliverables within budgeted cost and schedule at a high level of quality. Responsible for the quality of the static equipment deliverables. This will also involve input from other experts from throughout UOP Working effectively with team members and proactively communicating key decisions made on projects to others Identifying opportunities for improving Customer satisfaction Relevant experience in Design and Detailed engineering for Static Equipment (Reactors + internals) and other static equipment for Turnkey Projects which includes fluid flow and mechanical design for the petroleum refining & petrochemical industry. Candidate shall be having good knowledge of Principles, Practices and Procedures related to design of static equipment. Including good in-depth knowledge and experience in Solid Mechanics / Fatigue / creep and Fluid Mechanics viz static and dynamics Candidate shall also have an experience in production follow-up of various types of static equipment, including Reactors, Pressure vessels, Internals, heat exchangers, field support and troubleshooting. Knowledge of applicable codes and softwares e.g. FE Pipe, Compress / PV Elite. Fluency and working expertise in CAD software MicroStation ( 2D and 3D), AutoCad. Computation software Mathcad Knowledge of inter-disciplinary linkages & interdependencies. Excellent interpersonal and communication skills to be used at the International level with colleagues worldwide. Ability to maintain departmental / technology infrastructure software Good analytical skills and sound judgment Highly motivated, Independent and Team player Negotiation skills and business acumen are an advantage Preferred candidate profile Relevant experience in Design and Detailed engineering for Static Equipment and other static equipment for Turnkey Projects which includes fluid flow and mechanical design for the petroleum refining & petrochemical industry. Candidate shall be having good knowledge of Principles, Practices and Procedures related to design of static equipment. Including good in-depth knowledge and experience in Solid Mechanics / Fatigue / creep and Fluid Mechanics viz static and dynamics Candidate shall also have an experience in production follow-up of various types of static equipment including Reactors, Pressure vessels, Internals, heat exchangers, field support and troubleshooting. Knowledge of applicable codes and working expertise in CAD software MicroStation ( 2D and 3D), AutoCad. Computation software Mathcad Knowledge of inter-disciplinary linkages & interdependencies. Excellent interpersonal and communication skills to be used at the International level with colleagues worldwide. Ability to maintain departmental / technology infrastructure Perks and benefits

Role Summary The candidate will be responsible for the production of Public health building services designs predominantly for Railway Stations and other Railway Buildings, working individually or as part of a team Responsibilities The applicant will have proven experience in the Public Health design of Railway Station Building Services with significant experience in a similar role or demonstration of a good track record. Must be technically good in public health system calculations (water supply, drainage & Rainwater) and water tank, sump, pipe sizing & pressure drop calculations Carryout preparation of Technical submittals of various materials, equipment’s etc., The applicants should possess a degree in Mechanical Engineering Must have knowledge on softwares like AutoCAD, MEP Revit, Microstation & other drafting softwares A sound understanding of Microsoft Outlook, Word, Excel, Project is essential Experience of associated discipline software ( Hevacomp etc.) Must be fluent in English with an excellent understanding of technical terminology. Applicants need to be able to demonstrate good management and technical Implement delivery and quality measurement processes Promote technical excellence in all our projects. Provide continuous feedback to the Local Head of CRC on the effectiveness of the protocols and processes in place with a view to continuous improvement Develop positive professional relationship with the WSP UK Team, communicating openly about project progress Supervise, coordinate and support other project Engineers and CAD Technicians Ensure that Health & Safety is embedded into all work practices in line with company policies Ensure statutory and regulatory requirements are met within the design Participate in Project meetings, team meetings, disseminate information within the team, and communicate with other teams in WSP Identify and act on, or refer, potential risk issues and follow in full the company commercial and contracting processes Manage delegated tasks to ensure that deadlines are met and flag resourcing concerns to team leader Complete timesheet accurately ahead of weekly deadlines Key Competencies / Skills: Mandatory Skills The applicant will have proven experience in the design of public health Building Services designs predominantly for Railway Stations and other Railway Buildings with significant experience in a similar role or demonstration of a good track record. The applicants should possess a degree in Public Health Engineering and possess membership to an accredited engineering body i.e. IMechE, CIBSE, ISHRAE, ASHRAE. Must be technically good in Public health systems. The applicant should have design experience of UK Projects. This includes undertaking feasibility studies and developing concepts through to detailed design, specification and tender to the required standards. Development of energy strategies incorporating renewable technologies and low energy designs to satisfy local authority planning requirements and compliance with UK & other local regulations. Must be fully conversant with technical software, such as Hevacomp and others. A sound understanding of Microsoft Outlook, Word, Excel, Project is essential Must be fluent in English with an excellent understanding of technical terminology. Desired Skills Excellent working knowledge of NBC, BS, NFPA and other local codes and good working knowledge of UK codes would be advantageous Qualifications Bachelor’s degree in relevant subject Minimum of 4 years relevant work experience

Are you a skilled and experienced Mechanical Engineer looking to take the next step in your career? Look no further - iCRC is seeking a Senior Engineer - Mechanical to join our dynamic team and play a key role in driving innovation and excellence in our organization. As a Senior Engineer - Mechanical at iCRC, you will be responsible for leading and contributing to the design, development, and implementation of mechanical building services systems and components. You will work closely with cross-functional teams to ensure that our design delivery meet the highest standards of quality, performance, and reliability. Key Responsibilities: 1. Lead & Contribute the design and development of mechanical building services systems and its components for our projects, ensuring adherence to industry standards and best practices. This includes conduct design to WSP standards, various applicable Building Regulations and relevant Code of Practice and standards ensuring Construction Design and Management (CDM), Quality Assurance and technical review and sign off by the Local CRC Head of MEP, including complex calculations and co-ordination issues. 2. Collaborate with the team, other cross-functional teams including with the other WSP Teams outside India, to drive the successful delivery of mechanical solutions throughout the project lifecycle. Participate in Project meetings, team meetings, disseminate information within the team, and communicate with other teams in WSP. Develop positive professional relationship with the other WSP Teams outside India, communicating openly about project progress. 3. Works closely with Local CRC Head of MEP to manage delegated tasks to ensure that deadlines are met while ensuring compliance with regulatory requirements in line with company policies and ensure that Health & Safety is embedded into all work practices in line with company policies. Proactively works to identify opportunities for improvement and optimization and identify and act on any potential risk or issues in project delivery. 4. Provide technical expertise and guidance to junior engineers and contribute to their professional development. Raise the level of technical competence within the teams, supervise, coordinate, and support other project Engineers and BIM/CAD Technicians 5. Promote technical excellence in all our project, staying informed about industry trends, emerging technologies, and best practices, and integrating them into our project delivery processes. Undertake technical reviews, peer reviews, checks and contribute to the design of mechanical building services for the project. Qualifications: - Bachelor’s degree in mechanical engineering or related field. - Minimum of 8 years of experience in mechanical building services engineering. Have obtained or working towards obtaining Chartered Engineer status or equivalent and possess membership to an accredited engineering body i.e. CIBSE, IMECHE, ASHRAE, Institute of Plumbing - Proven track record of leading and delivering successful mechanical engineering projects. This includes undertaking feasibility studies and developing concepts through to detailed design, specification, and tender to the required standards. - Strong proficiency in technical software, such as IES, HAP, HEVACOMP and manufacturer’s software and other engineering tools. Must have knowledge on software’s like AutoCAD, MEP Revit, MicroStation & other drafting software’s and sound understanding of Microsoft Outlook, Word, Excel, Project is essential. - Familiarity with regulatory requirements and industry standards related to mechanical building services. - Excellent communication, interpersonal, and leadership skills. Must be fluent in English with an exceptional understanding of technical terminology. Good presentation skills are also required. At iCRC, we are committed to fostering a collaborative and innovative work environment, where employees are empowered to contribute their expertise and drive meaningful impact. As a Senior Engineer - Mechanical, you will have the opportunity to work on cutting-edge projects and make a significant contribution to the success of our organization. If you are a motivated and skilled Mechanical Engineer looking to take on a challenging and rewarding role, we encourage you to apply for the position of Senior Engineer - Mechanical at iCRC. Join us in shaping the future of our industry and making a difference in the world through innovative engineering solutions

Role Summary The Senior Electrical Engineer will be responsible for the production of electrical building services designs predominantly for Railway Stations and other Railway Buildings. As a senior member of the team will take responsibility for ensuring that all design work is produced on time and in accordance with the project quality requirements. The Senior Electrical Engineer will lead a team of engineers for successful project delivery. This includes design review of the electrical LV systems, supervising engineers, coordinating and design documentation on projects. Responsibilities Raise the level of technical competence within the teams. Operation of AMTECH / ElectricalOM software to produce a design for low voltage systems including a selection of cable types, protective devices and self-checking and presentation of results; Design of low voltage distribution systems (230/400Volt) including UPS sources; Design of normal & emergency lighting. Good working knowledge of lighting control systems. Design of cable management systems (CMS) including trunking, tray, and conduits and the preparation of CMS sizing calculations and self-checking and presentation of results; Presentation of design onto schematic and 2D layout drawings; Use of Bentley Microstation and AECOsim to model in 3D MEP services including but not limited to Cable Management Systems, etc in 3D, including generating 2D sections from 3D models for incorporation into drawings; Implement delivery and quality measurement processes Promote technical excellence in all our projects. Undertake technical reviews, peer reviews, checks and contribute to the design. Responsible for technical analysis and resolution of engineering problems. Provide continuous feedback to the Local Head of CRC on the effectiveness of the protocols and processes in place with a view to continuous improvement. Develop a positive professional relationship with the WSP UK Team, communicating openly about project progress. Guide Assistant Engineers/ Engineers in day to day work for the development of electrical designs. Supervise, coordinate and support other Engineers and BIM Modellers. Ensure that Health & Safety is embedded into all work practices in line with company policies. Ensure statutory and regulatory requirements are met within the design. Participate in Project meetings, team meetings, disseminate information within the team, and communicate with other teams in WSP Identify and act on, or refer, potential risk issues and follow in full the company commercial and contracting processes Manage delegated tasks to ensure that deadlines are met and flag resourcing concerns to the team leader. Identify and flag additional fees to the Local CRC Head of MEP Complete timesheet accurately ahead of weekly deadlines Key Competencies / Skills: Mandatory Skills The applicant will have proven experience in the design of Building Services predominantly for Railway Stations and other Railway Buildings with significant experience in a similar role or demonstration of a good track record. The applicants should possess a degree in Electrical Engineering and possess membership to an accredited engineering body i.e. MIET, CIBSE, INSRAE, ASHRAE. The senior applicants should have or working to obtainBritish Chartered Engineer status or equivalent, possess a degree in Building Services Engineering and possess membership to an accredited engineering body. Must be technically good in Electrical. The applicant should have design experience in UK Projects. This includes undertaking feasibility studies and developing concepts through to detailed design, specification and tender to the required standards. Development of energy strategies incorporating renewable technologies and low energy designs to satisfy local authority planning requirements and compliance with UK Must be fully conversant with technical software, such as Amtech, ElectricalOM, Dialux, and Relux. Bentley Raceway Design and Cable A sound understanding of Microsoft Outlook, Word, Excel, Project is essential Must be fluent in English with an excellent understanding of technical terminology. Valid passport Must be fluent in English with an excellent understanding of technical terminology. Desired Skills Excellent working knowledge of NBC, BS, NFPA and other local codes and good working knowledge of UK codes would be advantageous. Applicants need to be able to demonstrate good management and technical skills and be capable of working both within the team and independently, as dictated by work load Promote WSP in India Vision and Values. Qualifications Bachelor’s/Master’s degree in Electrical Engineering. Minimum of 8 to 12 years relevant work experience .

As a Senior Structural Designer with Worley, you will work closely with our existing team to deliver projects for our clients while continuing to develop your skills and experience etc Develop 3D models using E3D / SP3D / Tekla ensuring accuracy and compliance with project specifications. Prepare detailed 2D drawings and documentation as required. Experience on BBS & Fabrication drawings are preferred. Experience in AutoCAD and MicroStation for design and drafting tasks. Collaborate with engineering teams to integrate structural designs into overall project plans. Support material handling projects through effective design and modeling. Review and revise designs based on feedback from project stakeholders. Conduct quality checks to ensure all designs meet industry standards and client requirements. Knowledge of industry trends and best practices in structural design. Knowledge of national, international codes and standards, Vendor data reviews. Orientation to working in workshare and global integrated delivery environments. Good communication and presentation skills, verbal and written so as to communicate with client and lead offices. Support proposal engineering. Should be open for short travel and deputation to sites / lead offices where required. About You To be considered for this role it is envisaged you will possess the following attributes: Diploma or higher degree in Civil Engineering or a related field. Minimum 15 years of relevant experience

As a Senior Instrumentation Designer with Worley, you will work closely with our existing team to deliver projects for our clients while continuing to develop your skills and experience etc. Deliver Instrumentation and Electrical specific design and drafting services that meet Worley, the clients and applicable statutory and regulatory requirements Identify design scope based on the project definition and develop list of drawing deliverables and estimates to complete the work Initiate and manage design & drafting assignments for projects specific requirements as per schedule and budget Perform Instrumentation and Electrical specific design and drafting services such as: ensure the project scope is clear, identify change & risk with design scope and any changes to scope is recorded as per project change management processes interpret and interface vendor equipment and/or third-party design documents into project design ensure all drawings and documents are prepared and checked in accordance with Worley drafting standard and checking procedures participate in various project reviews and 3D model reviews as required Undertake design and drafting assignments in line with projects requirements on time and within budget Experience with Workshare delivery, communicate effectively with the GID/HO discipline teams on all discipline matters and other disciplines whilst considering design interfaces Establish and maintain good working relationships within the project team GID/HO About You To be considered for this role it is envisaged you will possess the following attributes: Diploma in Instrumentation or Electrical Engineering or an Electrical Tradesperson who has completed Instrumentation Design, Drafting and Estimates course At least 15 years Instrumentation and Electrical design and drafting experience in Mining Minerals and Metals/Material Handling sector industry, O&G Industry or similar industry Experience in Brownfield Instrumentation & electrical systems modifications and knowledge of control system interfaces A good understanding of Australian and European instrumentation & electrical standards Highly effective technical and practical Instrumentation & Electrical design and drafting skills Proven skillset in utilizing the following software and tools: Microstation SE and or AutoCAD 18 and above Microsoft Office and Excel 3D Modelling softwares (E3D and/or S3D) Navisworks Preferred : Smart Plant Instrumentation (INtools 2018) and/or AVEVA Instrumentation Effectively interface with other disciplines to ensure fit for purpose design Good understanding of control systems and PLC / DCS interfacing understanding of different types of inputs/outputs Ability to read and interpret P&IDS Proven experience in creating Instrumentation deliverables such as: Instrument and JB Location Layouts Cable Routing Layouts Control and Equipment Room Layouts Cable Schedules Field Cable/ Network Block Diagrams Instrument Loop Drawings Wiring and Termination Diagrams Hook-up Drawings Instrumentation Installation Drawings Material take offs Network Architecture Drawings Panel general arrangements Panel and Junction Box Layouts 3D Modelling of Offline Instruments, Panels/ JBs, Cable Trays/ Raceways Excellent verbal and written communications skills, including the ability to clearly convey information and ideas to project team members.

As a Senior Electrical Designer with Worley, you will work closely with our existing team to deliver projects for our clients while continuing to develop your skills and experience etc. Deliver Electrical and Instrumentation specific design and drafting services that meet Worley, the clients and applicable statutory and regulatory requirements. Identify design scope based on the project definition and develop list of drawing deliverables and estimates to complete the work. Initiate and manage design & drafting assignments for projects specific requirements as per schedule and budget. Perform Electrical and Instrumentation specific design and drafting services such as: Ensure the project scope is clear, identify change & risk with design scope and any changes to scope is recorded as per project change management processes. Interpret and interface vendor equipment and/or third-party design documents into project design. Ensure all drawings and documents are prepared and checked in accordance with Worley drafting standard and checking procedure. Participate in various project reviews as required. Undertake design and drafting assignments in line with projects requirements on time and within budget. Experience with Workshare delivery, communicate effectively with the GID/HO discipline teams on all discipline matters and other disciplines whilst considering design interfaces. Establish and maintain good working relationships within the project team GID/HO. About You To be considered for this role it is envisaged you will possess the following attributes: Diploma in Electrical Engineering or an Electrical Tradesperson who has completed the Electrical Design, Drafting & Estimates course. Electrical License (highly regarded). At least 15 years Electrical and Instrumentation design and drafting experience in the MMM/MH Industry or similar industry. Experience in Brownfield electrical systems and knowledge of control system interfaces. A good understanding of Australian electrical standards and other International standards. Highly effective technical and practical Electrical and Instrumentation design and drafting skills. Proven skillset in utilizing the following software and tools: Microstation SE and or AutoCAD 18 and above Microsoft Office and Excel 3D Modelling softwares (E3D and/or S3D) Navisworks Effectively interface with other disciplines to ensure fit for purpose design. Proven experience in creating electrical deliverables such as: Single line diagrams HV and LV Schematics for panels such as incomers, feeders, VSDs and motor starters Cable schedule Material take offs Electrical Equipment / Switchroom layouts Lighting calculation (Dialux) & Lighting Layout Power and Cable Routing layouts Earthing & Lightning Protection layouts Primary and secondary schematics and Termination diagrams Panel general arrangements 3D Modelling of Electrical Equipment, Cable Trays / Trenches / Raceways, Lighting Excellent verbal and written communications skills, including the ability to clearly convey information and ideas to project team members.

Auto Cad Engineer Job Name: Auto Cad Engineer Job Role: Engineer Job Location:Udaipur (Rajasthan)Industry:Construction/ civil/ architectJob Type:Full Time Experience:2- 4yearsSkills:Auto Cad Salary:Best in the industry Education:BE/ Btech (Mechanical) Job Summary: We are looking for a skilled AutoCAD drafter to generate solid and surface CAD models for our clients using AutoCAD software. In this role, you will be required to meet with architects and engineers to discuss design concepts for CAD models, develop product designs, and generate Surface or Solid software models. About The Role :: Meeting with architects, designers, and engineers to discuss design ideas. Developing product designs from scratch. Presenting rough design drafts for client approval. Ensuring product designs meet the required safety and structural standards. Generating Solid and Surface CAD models using AutoCAD software. Blending technique and aesthetics to create final designs. Presenting various design perspectives for construction improvements and adaptations. Finalizing AutoCAD models. Presenting models to clients. Completing job reports. Previous work experience as an AutoCAD drafter. Advanced knowledge of CAD and AutoCAD software. Advanced knowledge of mathematics, science, engineering, and architecture. Knowledge of state safety and structure regulations. Excellent technical design skills. Good communication skills.

Position: Instrumentation Designer. YOE: 5+ Years. Location: Mumbai. We re hiring Instrumentation Designer for one of our Leading MNC in Oil & Gas to join their growing team. This position is based out in Mumbai. Qualification: Diploma. Experience: 5+ Yrs. Software Skill: 3D (E3D),3D (SP3D), Microstation/Autocad.

We deliver the world s most complex projects. Work as part of a collaborative and inclusive team. Enjoy a varied & challenging role. Building on our past. Ready for the future Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia. Right now, we re bridging two worlds as we accelerate to more sustainable energy sources, while helping our customers provide the energy, chemicals and resources that society needs now. We partner with our customers to deliver projects and create value over the life of their portfolio of assets. We solve complex problems by finding integrated data-centric solutions from the first stages of consulting and engineering to installation and commissioning, to the last stages of decommissioning and remediation. Join us and help drive innovation and sustainability in our projects. The Role As a Senior Electrical Designer with Worley, you will work closely with our existing team to deliver projects for our clients while continuing to develop your skills and experience etc. Deliver Electrical and Instrumentation specific design and drafting services that meet Worley, the clients and applicable statutory and regulatory requirements. Identify design scope based on the project definition and develop list of drawing deliverables and estimates to complete the work. Initiate and manage design & drafting assignments for projects specific requirements as per schedule and budget. Perform Electrical and Instrumentation specific design and drafting services such as: Ensure the project scope is clear, identify change & risk with design scope and any changes to scope is recorded as per project change management processes. Interpret and interface vendor equipment and/or third-party design documents into project design. Ensure all drawings and documents are prepared and checked in accordance with Worley drafting standard and checking procedure. Participate in various project reviews as required. Undertake design and drafting assignments in line with projects requirements on time and within budget. Experience with Workshare delivery, communicate effectively with the GID/HO discipline teams on all discipline matters and other disciplines whilst considering design interfaces. Establish and maintain good working relationships within the project team GID/HO. About You To be considered for this role it is envisaged you will possess the following attributes: Diploma in Electrical Engineering or an Electrical Tradesperson who has completed the Electrical Design, Drafting & Estimates course. Electrical License (highly regarded). At least 15 years Electrical and Instrumentation design and drafting experience in the MMM/MH Industry or similar industry. Experience in Brownfield electrical systems and knowledge of control system interfaces. A good understanding of Australian electrical standards and other International standards. Highly effective technical and practical Electrical and Instrumentation design and drafting skills. Proven skillset in utilizing the following software and tools: Microstation SE and or AutoCAD 18 and above Microsoft Office and Excel 3D Modelling softwares (E3D and/or S3D) Navisworks Effectively interface with other disciplines to ensure fit for purpose design. Proven experience in creating electrical deliverables such as: Single line diagrams HV and LV Schematics for panels such as incomers, feeders, VSDs and motor starters Cable schedule Material take offs Electrical Equipment / Switchroom layouts Lighting calculation (Dialux) & Lighting Layout Power and Cable Routing layouts Earthing & Lightning Protection layouts Primary and secondary schematics and Termination diagrams Panel general arrangements 3D Modelling of Electrical Equipment, Cable Trays / Trenches / Raceways, Lighting Excellent verbal and written communications skills, including the ability to clearly convey information and ideas to project team members. Moving forward together We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We re building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard. And were not just talking about it; were doing it. Were reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in todays low carbon energy infrastructure and technology. Whatever your ambition, there s a path for you here. And there s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. Worley takes personal data protection seriously and respects EU and local data protection laws. You can read our full Recruitment Privacy Notice Here. Please note: If you are being represented by a recruitment agency you will not be considered, to be considered you will need to apply directly to Worley.

The Role As a Senior Instrumentation Designer with Worley, you will work closely with our existing team to deliver projects for our clients while continuing to develop your skills and experience etc. Deliver Instrumentation and Electrical specific design and drafting services that meet Worley, the clients and applicable statutory and regulatory requirements Identify design scope based on the project definition and develop list of drawing deliverables and estimates to complete the work Initiate and manage design & drafting assignments for projects specific requirements as per schedule and budget Perform Instrumentation and Electrical specific design and drafting services such as: ensure the project scope is clear, identify change & risk with design scope and any changes to scope is recorded as per project change management processes interpret and interface vendor equipment and/or third-party design documents into project design ensure all drawings and documents are prepared and checked in accordance with Worley drafting standard and checking procedures participate in various project reviews and 3D model reviews as required Undertake design and drafting assignments in line with projects requirements on time and within budget Experience with Workshare delivery, communicate effectively with the GID/HO discipline teams on all discipline matters and other disciplines whilst considering design interfaces Establish and maintain good working relationships within the project team GID/HO About You To be considered for this role it is envisaged you will possess the following attributes: Diploma in Instrumentation or Electrical Engineering or an Electrical Tradesperson who has completed Instrumentation Design, Drafting and Estimates course At least 15 years Instrumentation and Electrical design and drafting experience in Mining Minerals and Metals/Material Handling sector industry, O&G Industry or similar industry Experience in Brownfield Instrumentation & electrical systems modifications and knowledge of control system interfaces A good understanding of Australian and European instrumentation & electrical standards Highly effective technical and practical Instrumentation & Electrical design and drafting skills Proven skillset in utilizing the following software and tools: Microstation SE and or AutoCAD 18 and above Microsoft Office and Excel 3D Modelling softwares (E3D and/or S3D) Navisworks Preferred : Smart Plant Instrumentation (INtools 2018) and/or AVEVA Instrumentation Effectively interface with other disciplines to ensure fit for purpose design Good understanding of control systems and PLC / DCS interfacing understanding of different types of inputs/outputs Ability to read and interpret P&IDS Proven experience in creating Instrumentation deliverables such as: Instrument and JB Location Layouts Cable Routing Layouts Control and Equipment Room Layouts Cable Schedules Field Cable/ Network Block Diagrams Instrument Loop Drawings Wiring and Termination Diagrams Hook-up Drawings Instrumentation Installation Drawings Material take offs Network Architecture Drawings Panel general arrangements Panel and Junction Box Layouts 3D Modelling of Offline Instruments, Panels/ JBs, Cable Trays/ Raceways Excellent verbal and written communications skills, including the ability to clearly convey information and ideas to project team members. Moving forward together We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We re building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard. And were not just talking about it; were doing it. Were reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in todays low carbon energy infrastructure and technology. Whatever your ambition, there s a path for you here. And there s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. Worley takes personal data protection seriously and respects EU and local data protection laws. You can read our full Recruitment Privacy Notice Here. Please note: If you are being represented by a recruitment agency you will not be considered, to be considered you will need to apply directly to Worley.

The Role As a Senior Structural Designer with Worley, you will work closely with our existing team to deliver projects for our clients while continuing to develop your skills and experience etc Develop 3D models using E3D / SP3D / Tekla ensuring accuracy and compliance with project specifications. Prepare detailed 2D drawings and documentation as required. Experience on BBS & Fabrication drawings are preferred. Experience in AutoCAD and MicroStation for design and drafting tasks. Collaborate with engineering teams to integrate structural designs into overall project plans. Support material handling projects through effective design and modeling. Review and revise designs based on feedback from project stakeholders. Conduct quality checks to ensure all designs meet industry standards and client requirements. Knowledge of industry trends and best practices in structural design. Knowledge of national, international codes and standards, Vendor data reviews. Orientation to working in workshare and global integrated delivery environments. Good communication and presentation skills, verbal and written so as to communicate with client and lead offices. Support proposal engineering. Should be open for short travel and deputation to sites / lead offices where required. About You To be considered for this role it is envisaged you will possess the following attributes: Diploma or higher degree in Civil Engineering or a related field. Minimum 15 years of relevant experience Moving forward together We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We re building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard. And were not just talking about it; were doing it. Were reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in todays low carbon energy infrastructure and technology. Whatever your ambition, there s a path for you here. And there s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. Worley takes personal data protection seriously and respects EU and local data protection laws. You can read our full Recruitment Privacy Notice Here. Please note: If you are being represented by a recruitment agency you will not be considered, to be considered you will need to apply directly to Worley.

Were active members of the communities we serve Thats why at Stantec we always design with community in mind We believe growing a great design company happens from the inside out We look for people who are drawn to use every talent they possess, plus creativity, determination and a drive to do the extraordinary The Stantec community unites approximately 22,000 employees working in over 400 locations across six continents We collaborate across disciplines and industries to bring projects to life Our work as architects, engineers, and consultants from initial project concept and planning through design, construction and commissioning is built on a solid history of success So, when we take on a project, we see the opportunity to make a lasting connection with the people and places where we live and work Redefine your personal best Join us! Your Opportunity Stantec is looking for a Bridge Design Engineer that can be a part of our growing team in Pune The candidate will be working with Bridge Engineers, Bridge draftsmen, Highway engineers, Highway draftsmen and other senior staff in the successful delivery of projects At Stantec we put people first by delivering exciting career opportunities We want to discuss with you why this is a great opportunity! Primary Purpose Of The Role Contribute to the ongoing growth of STANTEC ResourceNet Private India Ltd by providing technical expertise in the various sectors, as part of a multi-disciplinary team delivering conceptual design, outline design, detailed design, and construction support for Bridge/Transportation projects across the STANTEC offices (UK, North America, Middle East, Australia & NZ) To be involved in the implementation and delivery of leading edge programmes and projects Support project managers by providing technical support to ensure that project outcomes in terms of budget, schedule, technical and quality standards, meet both the client and STANTEC expectations Your Key Responsibilities Produce design solutions from outline briefs, correctly interpret data and effectively communicate to others Produce and check design, analysis and assessment calculations and review detailed drawings Work on projects concurrently under engineering supervision and in close collaboration with other teams Ensure delivery of projects in accordance with quality, timescales, and budget Produce and review designs and drawings to ensure that technical designs will provide appropriate solutions to our clients and budgets will be met Plan, program, co-ordinate project tasks Exercise quality control of deliverables Maintain communication and develop ongoing contacts with clients as required Maintain records of all reports/drawings/documents Your Capabilities and Credentials Masters degree in Structural Engineering, preferably in Bridges Minimum 5 years of experience in the consulting and engineering industry after graduate education, technical knowledge of bridge design in MIDAS, CSiBridge International projects experience is preferred North American and/or UK experience preferred Sound knowledge of technical standards such as AASHTO bridge specifications, DMRB, (UK), and other similar standards Experience in working with bridge CAD detailers Seismic and Wind load calculations and analysis Knowledge of Prestressed concrete and steel composite bridge design Knowledge of Load rating for Concrete and Steel Bridges Good experience of using software such as LEAP Bridge, MIDAS, CSiBridge, OpenBridge Modeler, STAAD-Pro, L-Pile, MATHCAD, & Excel worksheets Knowledge of AutoCAD, MicroStation & Revit is a plus Experience in Data/Document management system ProjectWise, BIM360 Good knowledge of bridge construction techniques and practices Strong problem resolution skills Ability to work collaboratively with all levels of staff, technical specialists and Discipline leads across the globe Ability to take directions from Seniors Proficient in Microsoft (MS) Office Suite Effective communicator and able to work under tight schedule competent level of client service management, i e able to interface with clients and to build and maintain lasting, positive relationships with our clients Education And Experience A Bachelors degree in Civil Engineering or Masters degree in Structural/Bridge Engineering with 5+ years of international experience in design and documentation of bridge projects Experience on international projects and particularly North American/UK projects is preferred Primary Location: India | Pune Organization: Stantec IN Business Unit Employee Status: Regular Job Level: Nonmanager Travel: No Schedule: Full time Job Posting: 13/02/2025 09:02:49 Req ID: 1000759

Were active members of the communities we serve Thats why at Stantec we always design with community in mind We believe growing a great design company happens from the inside out We look for people who are drawn to use every talent they possess, plus creativity, determination and a drive to do the extraordinary The Stantec community unites approximately 22,000 employees working in over 400 locations across six continents We collaborate across disciplines and industries to bring projects to life Our work as architects, engineers, and consultants from initial project concept and planning through design, construction and commissioning is built on a solid history of success So, when we take on a project, we see the opportunity to make a lasting connection with the people and places where we live and work Redefine your personal best Join us! Your Opportunity Stantec is looking for a Senior Bridge Design Engineer that can be a part of our growing team in Pune The candidate will be working with Bridge Engineers, Bridge draftsmen, Highway engineers, Highway draftsmen and other senior staff in the successful delivery of projects At Stantec we put people first by delivering exciting career opportunities We want to discuss with you why this is a great opportunity! Primary Purpose of the Role Contribute to the ongoing growth of STANTEC ResourceNet by providing technical expertise in bridge design, as part of a multi-disciplinary team delivering conceptual design, outline design, detailed design, and construction support for Bridge/Transportation projects across the STANTEC offices (UK, North America, Middle East, Australia & NZ) To be involved in the implementation and delivery of leading edge programmes and projects Support project managers, work as a team leader by providing technical support to ensure that project outcomes in terms of budget, schedule, technical and quality standards, meet both the client and STANTEC expectations Your Key Responsibilities Produce and review design solutions from outline briefs, correctly interpret data and effectively communicate to others Produce and check design, analysis and assessment calculations and review detailed drawings Work on multiple projects concurrently with minimal supervision and in close collaboration with other teams Ensure delivery of projects in accordance with quality, timescales, and budget Training and mentoring junior staff, assisting with proposal preparation, project presentation, project management and budget management Manage the bridge design and bridge drafting team(s) allocated on projects Produce and reviews designs, drawings and budgets to ensure that technical designs will provide appropriate solutions and budgets will be met Plan, program, co-ordinate project teams and tasks Exercise quality control of deliverables Maintain communication and develop ongoing contacts with clients as required Maintain records of all reports/drawings/documents Your Capabilities and Credentials Masters degree in Structural Engineering, preferably in Bridges Minimum 12 years of experience in the consulting and engineering industry after graduate education, technical knowledge of bridge design in MIDAS, CSiBridge International projects experience is preferred North American and/or UK experience preferred Design experience on complex bridges such as cable stay bridges, suspension bridges, extra-dosed bridges are a plus Candidate with UK CEng/IStruct or North America Professional Engineering (PE) is a plus Sound knowledge of technical standards such as AASHTO bridge specifications, DMRB, (UK), and other similar standards Experience in leading/guiding a small team of bridge engineers and bridge CAD detailers Seismic and Wind load calculations and analysis Knowledge of Prestressed concrete and steel composite bridge design Knowledge of Load rating for Concrete and Steel Bridges Preparation of technical reports/bid documents/proposal support Preparation of Bill of Quantities Mentor team in 3D BIM modelling and train graduate engineers/designers in preparing 3D BIM models Good experience of using software such as LEAP Bridge, MIDAS, CSiBridge, OpenBridge Modeler, STAAD-Pro, L-Pile, MATHCAD, & Excel worksheets Knowledge of AutoCAD, MicroStation & Revit is a plus Experience in Data/Document management system ProjectWise, BIM360 Good knowledge of bridge construction techniques and practices Ability to make decisions independently and strong problem resolution skills Ability to work collaboratively with all levels of staff, technical specialists and Discipline leads across the globe Ability to take directions from Seniors Proficient in Microsoft (MS) Office Suite Effective communicator and able to work under tight schedule competent level of client service management, i e able to interface with clients and to build and maintain lasting, positive relationships with our clients Education and Experience A Bachelors degree in Civil Engineering or Masters degree in Structural/Bridge Engineering with 12+ years of international experience in design and documentation of bridge projects Experience on international projects and particularly North American/UK projects is preferred Primary Location: India | Pune Organization: Stantec IN Business Unit Employee Status: Regular Job Level: Nonmanager Travel: No Schedule: Full time Job Posting: 13/02/2025 09:02:19 Req ID: 1000758

Madhav Associates is looking for AutoCAD Draftsman to join our dynamic team and embark on a rewarding career journey Presenting rough design drafts for client approval Finalizing AutoCAD models Presenting models to clients Completing job reports Advanced knowledge of CAD and AutoCAD software Excellent technical design skills Good communication skills

Highway/Transport infrastructure design-Low/medium cost highway design schemes. Public realm Design- Footways/Cycleways, Design of Pedestrian/Cycle crossings. Design of Bus Corridors/Park and Ride schemes. Junction Design – Priority/Signalised/Roundabout Junctions. Road Signs and Markings design. Parking studies/strategies. Technical report for scheme appraisals. Vehicle Swept path analysis. Basic Knowledge on Traffic Signals. Project Management – Design Decision Registers/Design Risk Registers.