11 Microprocessor Jobs

Responsibilities: 1. Ability to understand the Testing requirements and bring up appropriate test plans, test reports, quick prototypes 2. Ability to write the firmware for Test out the Electronics Components. 3. Coordination with different teams to meet the product requirements Requirements & Skills: Must to have: 1. Experience with linux environment 2. Familiar with basic linux commands such as cp, rm, mv etc.. 3. Familiar with rpi environment 4. Hand-on experience in hardware implementation of embedded communication protocols such as 1-wire, I2C, SPI, UART, USB, I2S 5. Develop test environments and test cases for all mechanical and Electronics systems 6. Worked with any of the following such as Wi-Fi, Microphone, Battery, LCD, Display, Amplifier, Speaker. 7. Familiar with testing of various hardware platforms specific to audio front end such as DSP, Amplifier, Speakers, Microphones 8. Build automated testing systems for regular checks 9. Work with cross-functional teams to complete the assigned job duties within deadlines. 10. Understand and interpret drawings, schematics, technical manuals and instructions. 11. Work with Supervisors to plan and coordinate test activities. 12. Review test procedures and instructions before starting the system testing processes Good to have: 1. Strong communication and documentation skills and ability to operate independently. 2. Knowledge about Wi-fi/Bluetooth/RF/ Antenna Technologies is a plus. 3. Experience of designing hardware schematic 4. Familiar with MIPI Camera & display Modules and their communication protocols & AP Interface. 5. Experience in working with embedded linux environments 6. Diverse experience in microcontroller/ microprocessor based circuit design and bring-up. Ideally from ST/TI/NXP/Renesas and sensor interface on PCBA level.

Required Qualifications: Bachelors or Masters degree in Electrical Engineering, Computer Engineering, or related field with 15 years or more relevant experience. Experience with use-case analysis and decomposition. Experience in Linux, Zephyr, Free RTOS or similar operating systems. Strong understanding of microprocessor and micro controller architectures, including CPU cores , DSP, memory management, and peripheral integration. Experience with system level performance optimization, low-power design, SW/HW co-design , and real-time processing. Familiarity with high-speed interconnects, memory architectures, DDR, PCIe, and bus protocols. Strong collaboration skills to work across multidisciplinary teams, including silicon, software, hardware, board design, and validation engineers. Experience in product development processes. Preferred Qualifications: Experience with ARM Cortex and/or RISC-V architecture. Experience with media processing, vision and imaging applications. Experience with system-level simulation tools, hardware/software co-design, and debugging techniques. Familiarity with Machine Learning Hardware IPs, tools, and architecture. Knowledge of functional safety and security standards. Familiarity with Wi-Fi integration, networking protocols, and secure wireless communication.

Required Qualifications: Bachelors or Masters degree in Electrical Engineering, Computer Engineering, or related field with 15 years or more relevant experience. Experience with use-case analysis and decomposition. Experience in Linux, Zephyr, Free RTOS or similar operating systems. Strong understanding of microprocessor and micro controller architectures, including CPU cores , DSP, memory management, and peripheral integration. Experience with system level performance optimization, low-power design, SW/HW co-design , and real-time processing. Familiarity with high-speed interconnects, memory architectures, DDR, PCIe, and bus protocols. Strong collaboration skills to work across multidisciplinary teams, including silicon, software, hardware, board design, and validation engineers. Experience in product development processes. Preferred Qualifications: Experience with ARM Cortex and/or RISC-V architecture. Experience with media processing, vision and imaging applications. Experience with system-level simulation tools, hardware/software co-design, and debugging techniques. Familiarity with Machine Learning Hardware IPs, tools, and architecture. Knowledge of functional safety and security standards. Familiarity with Wi-Fi integration, networking protocols, and secure wireless communication.

Notice period : Immediate to 15 Days Location : Bangalore Key Responsibilities: - Design, develop, execute, debug and automate tests to validate security FW. - Validate security firmware encompassing a wide range of security features at functional and system level. - Develops and execute test plans to evaluate functionality, security, and efficiency of firmware utilizing emulation and evaluation boards for pre-silicon and post silicon testing. - Work closely with security lead and other stakeholders to understand requirements and provide feedback. - Triage, analyze, debug, fix and drive issues/tasks to closure. Educational Background : Bachelors or masters in EE or CS or equivalent is required Must Have Requirements: - A minimum of 4 years' experience and maximum of 7 years of experience in security firmware validation on ARM and RISC V microprocessors. - High level understanding of cryptography concepts (symmetric and asymmetric cryptography, Root of Trust etc.,) - Proficient in defining, designing and developing manual/Automation test cases for firmware functional level testing and system level testing. - Hands on experience with Jenkins, shell/python scripting - Hands on experience with C programming. - Must be proficient with hardware board setup. - Candidate must be available to work out of AMD Whitefield Office on most working days - Experience in semiconductor domain preferred. - Quick learning and self-motivated. - Good written and verbal communication skills in English

A PCB Designer in R&D designs and develops printed circuit boards (PCBs) for new and existing products, ensuring functionality, reliability, and manufacturability Required Candidate profile Proficiency in PCB Design Software Circuit schematics into physical designs Production of Microprocessor PCB Programming Processor Knowledge Component Knowledge

Core Responsibilities: 1. Design and develop new hardware platform for multiple projects. 2. Partner with the embedded software team for hardware/ firmware co-design and development; optimization. 3. Ability to make sense of complex functional requirements and buld-up appropriate electronics hardware based solutions. 4. Create a reliable and modular design and qualify the integrated design with respect to the performance requirements. Requirements & Skills: Must to have: 1. 6 year to 8 years of experience in low-power circuit design, system bring-up, engineering-build integration and debug the performance issues in the integrated product. 2. 4 year to 8 years of experience driving design development from component selection, schematic capture, PCB layout, assembly and integration with other modules of product. 3. 5+ of experience in development of Multi-layer, mixed-signal board-level design in Altium/ Eagle. 4. Experience in embedded Linux based SOCs design along with microcontrollers. 4. Experience of power supply topologies: DC-DC, Flyback Converters, LDOs, etc. 5. Experience of Battery charger design, signal conditioning, sensor interface; protection circuits. 6. Hand-on experience in hardware implementation of embedded system data. communication protocols such as 1-wire, I2C, SPI, UART, USB, TCP/ IP, wireless, BLE 7. Experience of BDC/ BLDC or steppers motors, motor driver circuit design and its working principles. 8. Diverse experience in microcontroller/ microprocessor based circuit design and bring-up. Ideally from ST/ TI/ NXP/ Renesas and sensor interface on PCBA level. 9. Ability to Interface sensors like current-voltage, Time-of-Flight, Proximity, Position, ALS, etc on a PCBA level. 10. Knowledge about Design calculations/ Worst-case performance analysis, Design Documentation during Product Development Life-Cycle milestones. 11.Knowledge of EMI/ EMC/ ESD standards and practices is preferred. Good to have: 1. Strong communication and documentation skills and ability to operate independently. 2. Experience with portable, battery operated designs and power budgeting. 3. Knowledge about Wi-fi/ Bluetooth/ RF/ Antenna Technologies . 4. Experience with RTOS 5. Experience with ESP32 and ESP-IDF 6 Experience of Microphone and Speaker circuit design is a plus 7. Familiar with PCB fabrication technologies, Rigid-Flex PCBs, Flex Cables. 8. Hand-on experience of manufacturing process including DFM and DFT for consumer products at scale. 9 Familiar with sensor interface, MIPI Camera CSI and DSI ; display Modules and their communication protocols applications; Power Supply design and distribution for low power applications, motor drive control design, Pwm, DMA control and Audio signal Processing interface.

About Mistral From the initial architecture stage all the way to manufacturing support, Mistral provides hardware design services for embedded product development which include PCB layout, board design, programmable logic and enclosure designs integrating FPGAs, DSPs, microprocessors, and complex RF, analog, and power systems to realize the complete embedded electronic design for a given application. Required Skills Digital / Mixed-Signal Design Experience for Consumer / Industrial / Automotive markets Microprocessor / FPGA Experience - TI, NXP , Qualcomm, Renesas, Xilinx, Altera FPGA High Speed Memory interfaces DDR4, LPDDR4, OSPI, EMMC, SD Audio and Video Design Experience - LCD, HDMI, Display port, DSI, CSI, McASP Wired Connectivity Ethernet, USB, PCIe, DC/DC Power supply design, Battery operated product design experience Test and Debug - Board Bring Up, Interface testing, Level zero coding Knowledge of debugging tools like IDEs, Emulators Instrument Knowledge - CROs, Multimeters, Logic Analyzers. Spectrum Analyzers Multi-layer PCB Layout, DFM & DFA knowledge. Exposure to design tools - ORCAD, Allegro / Mentor Graphics / Altium Experience of interaction with PCB fabrication house and assembly house for hardware build. Customer communication and front-ending for technical aspects Design analysis for SI, PDN, Thermal, EMI/EMC Product qualification / Compliances test experiences Level-0 coding in C / Assembly for hardware validation. Mandatory Skills: Digital, Mixed Signal Design, Microprocessor, FPGA Experience, High Speed Memory interfaces, Audio and Video Design, Designation: Hardware Engineer Years Of Experience: 2 to 8 Years

Skills : Embedded C, Multi-threading, Linux, Networking protocols -Socket Programming, Microprocessor,IPC, Camera Image Tuning, RTSP protocol, ONVIF Protocol, Audio Codec, Video Codec Required Candidate profile , Gstreamer/ Streaming, Video parsers for H.264, H.265, HTML and Javascript, Image Processing technique.Notice Period: 0- 60 days

Core Responsibilities: 1. Design and develop new hardware platform for multiple projects. 2. Partner with the embedded software team for hardware/ firmware co-design and development; optimization. 3. Ability to make sense of complex functional requirements and buld-up appropriate electronics hardware based solutions. 4. Create a reliable and modular design and qualify the integrated design with respect to the performance requirements. Requirements & Skills: Must to have: 1. 6 year to 8 years of experience in low-power circuit design, system bring-up, engineering-build integration and debug the performance issues in the integrated product. 2. 4 year to 8 years of experience driving design development from component selection, schematic capture, PCB layout, assembly and integration with other modules of product. 3. 5+ of experience in development of Multi-layer, mixed-signal board-level design in Altium/ Eagle. 4. Experience in embedded Linux based SOCs design along with microcontrollers. 4. Experience of power supply topologies: DC-DC, Flyback Converters, LDOs, etc. 5. Experience of Battery charger design, signal conditioning, sensor interface; protection circuits. 6. Hand-on experience in hardware implementation of embedded system data. communication protocols such as 1-wire, I2C, SPI, UART, USB, TCP/ IP, wireless, BLE 7. Experience of BDC/ BLDC or steppers motors, motor driver circuit design and its working principles. 8. Diverse experience in microcontroller/ microprocessor based circuit design and bring-up. Ideally from ST/ TI/ NXP/ Renesas and sensor interface on PCBA level. 9. Ability to Interface sensors like current-voltage, Time-of-Flight, Proximity, Position, ALS, etc on a PCBA level. 10. Knowledge about Design calculations/ Worst-case performance analysis, Design Documentation during Product Development Life-Cycle milestones. 11.Knowledge of EMI/ EMC/ ESD standards and practices is preferred. Good to have: 1. Strong communication and documentation skills and ability to operate independently. 2. Experience with portable, battery operated designs and power budgeting. 3. Knowledge about Wi-fi/ Bluetooth/ RF/ Antenna Technologies . 4. Experience with RTOS 5. Experience with ESP32 and ESP-IDF 6 Experience of Microphone and Speaker circuit design is a plus 7. Familiar with PCB fabrication technologies, Rigid-Flex PCBs, Flex Cables. 8. Hand-on experience of manufacturing process including DFM and DFT for consumer products at scale. 9 Familiar with sensor interface, MIPI Camera CSI and DSI ; display Modules and their communication protocols applications; Power Supply design and distribution for low power applications, motor drive control design, Pwm, DMA control and Audio signal Processing interface.

Key Responsibilities : - Design, develop, test, and debug embedded software applications. - Collaborate with hardware engineers to define system requirements and specifications. - Integrate hardware components and peripherals into embedded systems. - Optimize code for performance and efficiency on resource-constrained devices. - Conduct software testing and validation to ensure reliability. - Utilize real-time operating systems (RTOS) for embedded applications. - Analyze and enhance existing embedded solutions for performance improvements. - Develop and maintain technical documentation for embedded systems. - Engage in code reviews and provide constructive feedback to peers. - Support the production and field engineering teams with troubleshooting. - Evaluate and select appropriate microcontrollers and processors for projects. - Implement and manage software version controls and repositories. - Collaborate in cross-functional teams for project planning and execution. - Research and stay current with emerging trends in embedded technology. - Provide technical leadership and mentorship to junior engineers. Required Qualifications : - Bachelor's degree in Computer Engineering, Electrical Engineering, or related field. - 3+ years of experience in embedded system design and development. - Strong knowledge of C/C++ programming languages. - Experience with microcontrollers and microprocessors. - Proficiency in hardware debugging tools and methodologies. - Familiarity with embedded Linux and RTOS environments. - Understanding of communication protocols (I2C, SPI, UART, etc.) - Experience in circuit design and analysis. - Strong analytical and problem-solving skills. - Ability to work collaboratively in a team environment. - Excellent written and verbal communication skills. - Familiarity with AGILE or SCRUM methodologies is a plus. - Experience with software development tools (i.e., IDE, debuggers). - Knowledge of signal processing techniques is an advantage. - Proven track record of delivering projects on time and within scope. - Willingness to continuously learn and adapt to new technologies. Location-Bengaluru,Chennai,Hyderabad,Noida,Pune

BE|BTech|ME |MTech candidates having 1 to 3 years of experience in Development experience in Embedded domain using C Programming Experience in Microprocessor Experience in working on any Linux/Android Drivers Alternative : Embedded C or C++ With (Linux or RTOS) Embedded C or C++ With (Linux or RTOS or Android ) with Kernel programing exp Role The engineer is expected to contribute to advanced software development environment facilitating board bring-up, development, and delivery. The engineer is expected to develop and debug software prototypes including device driver level software. Hands on in microprocessor Hardware device Software System development and bug fixing on Chipsets for products based on Android/Linux/QNX OS platforms. Development and implementation of an efficient and transparent variant handling and re-use concept for the platform.