529 Micrometer Jobs - Page 17

Operate the FESEM in SE and BSE mode with EDS and EBSD. Performs routine maintenance on the microscope. Explains and demonstrates how to operate instruments to students, faculty, etc. Keeps records on instrument usage, service repairs and maintenance manuals. Essential: M. Sc. in Physics/Chemistry/Nano Technology or B. E/ B. Tech in Engineering Streams. Minimum two years’ experience on handling of FESEM, EDS with other possible attachments of FESEM.

+You are deputed as an Inspector at customer end +Your job will be to carry out Quality Inspection of parts and vehicles using quality tools used in Automotive Industry +You have experience of working in Quality department in Automotive industry + + Job Responsibilities: +Sorting and rework of parts +Knowledge of drawing reading, using measurement tools such as Vernier caliper, Micrometer Screw gauge is essential +Experience in doing basic rework of parts such as rust removal, de-burring, basic paint rework etc. +Knowledge of typical defects observed in different commodities such as casting, Forging, machining, Plastic molding, sheet metal etc. (as applicable for the particular project) +Reporting the work done on daily basis to Supervisor +Inspection of vehicle exterior, interior based on provided inspection criteria (as applicable for particular project)

Quality Test Engineer – Job Criteria Hindustan Amusement Machines Job Purpose To ensure all amusement rides are manufactured, assembled, and tested according to safety, durability, and design specifications, and comply with national and international standards (BIS/ASTM/EN). This role is responsible for checking structural integrity, painting & FRP quality, safety systems, and ride performance before dispatch. Key Responsibilities Inspect raw materials, fabricated parts, FRP components, and mechanical/electrical assemblies. Conduct in-process and final quality checks as per approved checklists. Perform load, vibration, noise, endurance, and safety system testing. Measure paint thickness, FRP quality, and alignment tolerances. Document test results, prepare QC reports, and tag approved items. Coordinate with the design, engineering, and safety teams for continuous improvement. Ensure compliance of components with internal standards and applicable safety codes. Maintain calibration and quality testing tools and equipment. Technical Skills Required Ability to read technical drawings and mechanical diagrams. Proficiency with measuring tools (vernier caliper, micrometer, DFT meter, vibration meter). Knowledge of welding quality inspection and NDT methods. Experience with FRP and mechanical safety system checks. Understanding of electrical and mechanical failures in inspection. Familiarity with BIS, ASTM, and EN ride safety standards. Experience Minimum 2 years in quality control/testing in mechanical or amusement ride manufacturing. Hands-on experience in ride testing or rotating equipment QC preferred. Soft Skills Detail-oriented with excellent documentation skills. Strong problem-solving and root cause analysis abilities. Ability to work independently and under pressure.

Job Purpose:To assist in the daily operations of the Quality Control Lab by conducting routine tests and maintaining documentation as per BIS (ISI 694) standards and internal quality norms, ensuring product conformity and compliance. Key Responsibilities:Testing & Inspection: Perform basic quality and electrical tests on PVC wires and cables (e.g., conductor resistance, insulation thickness, high voltage test). Assist in the sampling and testing of raw materials like copper, PVC compound, and other input materials. Support in conducting in-process inspections during manufacturing. Standards Compliance: Ensure testing is done in line with ISI 694 license requirements and other applicable BIS standards. Maintain updated knowledge of testing parameters required for ISI license renewals and audits. Lab Equipment Handling: Operate and calibrate testing equipment like Vernier caliper, micrometer, resistance meter, HV test set, aging oven, tensile tester, etc. Report any malfunctioning or need for calibration to the Lab Incharge immediately. Documentation & Record Keeping: Record test results clearly in logbooks and quality reports. Ensure traceability of tested batches through proper documentation and labelling. Support in Audit and Certification: Assist in preparation for BIS audits and external inspections. Maintain all testing records as per BIS documentation requirements. General Laboratory Duties: Ensure cleanliness and safety within the lab environment. Handle samples systematically and dispose of waste as per lab protocols. Key Skills & Requirements:Educational Qualification: Diploma / ITI in Electrical, Electronics, or similar discipline. Experience: 0–2 years in a wire and cable manufacturing QC Lab (Freshers with training exposure can also apply). Knowledge Required: Basic understanding of ISI 694 specifications and testing methods. Familiarity with wire testing instruments. Awareness of safety and quality norms. Desirable Attributes:Good observation and reporting skills. Willingness to learn and follow instructions. Basic knowledge of Excel and documentation practices. Team player with discipline and punctuality.

We are hiring a Quality Engineer with 2 years of hands-on experience in manufacturing or production environments. The candidate will be responsible for maintaining quality standards, conducting inspections, preparing reports, and ensuring compliance with industry and customer standards. Requirements: Diploma / BE in Mechanical or related field Minimum 2 years of experience in quality control or assurance Knowledge of inspection tools like Vernier, Micrometer, etc. Familiarity with ISO documentation and quality procedures Good communication and report-writing skills Benefits: ✔️ 6-day working week ✔️ Bonus/Incentives based on performance ✔️ Learning and growth opportunities ✔️ Friendly work environment

Role & responsibilities Verify Q cost file for correctness like Cost, Quantity, Commodity, Supplier, Project, etc., -Update the QM cost data in excel file -Update the cost in monthly report and SQPC -Initiate FNS in Nexus. -Monitoring the recovery cost from supplier. -Follow up supplier rejection movement and replacement -Ensure the replacement material to customer during complaints on time. Qualification - Dip/BE -Mechanical Preferred candidate profile Attractive salary & other benefits .cab facility available .rotational shifts

Working knowledge of various metrology devices like Vision Measurement system (VMS), Co-ordinate Measuring Machine (CMM), Vernier Caliper, Micrometer, Height Gauge, etc.. Performs receiving inspections (visual & dimensional) on incoming raw materials, packing materials & components purchased, as per defined specifications. Performs monitoring of key process variables & communicates the shop-floor process adjustments, as may be required, to the appropriate personnel & work with them. Performs in-process inspections (visual & dimensional) on components being produced &/or packed in the prescribed packing materials, as per defined specifications. Rejects nonconforming materials & components by segregating, labeling & quarantining the lots communicates & reports the nonconformity to supervisor. Participates in new product developments & process validation per protocols. Reads & perform first article inspection (FAIR) as per drawings using inspection guide sheets & standard & custom gages. Performs inspections on finished products before they are packed in cartons, stored & palletized for shipping, as per defined specifications &/or as per customer requirements. Monitor & maintain the critical measuring equipment's & instrumentation to ensure proper operation. Coordinate periodical calibration of all measuring & monitoring devices & fixtures. Supports investigating root cause analysis & corrective & preventive actions for customer complaints. Control of QMS documents & retention of records. Documents inspection results by completing reports & logs; inputting data into quality database. Maintains safe & healthy work environment (cleanroom) by following standards & procedures. Assist in the writing & updating inspection checklists & reports. Evaluate problems & make initial recommendations for possible corrective action to supervise. Quality inspection of plastics injection molded & assembled medical devices. Quality Management System (QMS) Requirements (QA / QC) - preferably ISO 13485. Good mechanical aptitude, arithmetic, analytical quality engineering & technical process engineering experience in trouble shooting & process improvement. General proficiency in computer applications like Minitab, MS Word, Excel, PowerPoint, Outlook, etc.. #IND Show more Show less

Working knowledge of various metrology devices like Vision Measurement System (VMS), Co-ordinate Measuring Machine (CMM), Vernier Caliper, Micrometer, Comparator, Height Gauge, etc. Develop and establish quality procedures & shift schedules for inspectors for testing of products in all stages of manufacturing. Review product drawings, classify all the probable nonconformities into various risk categories & define a control plan (inspection & lab test methods & sampling frequency, sample size & AQL) for all. Interact with engineering function on FMEA & inspect & review engineering releases, adhering to strict guidelines on quality risk management methods. Perform process audits, product audits & internal quality audits and report the findings. Maintain a CAPA log record, follow up on open CAPAs, and update. Train quality engineers, inspectors & operators on updated work instructions & quality control methods and guide them on measurement (metrology) methods. Work with the production team to implement testing criteria or assembly methods developed. Organize incoming inspection of raw materials & bought-out parts, an in-process inspection of items & final inspections of finished products as per defined frequencies. Conduct supplier audits, and monitor supplier quality performance & corrective actions if any. Monitor cleanroom conditions by organizing external testing as per AHU re-qualification procedures. Maintain the list of monitoring and measuring devices, schedule & organize periodical calibration. Facilitate successful qualification/validation of processes in product development (IQ, OQ, & PQ), record the results & document them as applicable & as defined by the customer for all the phases. Perform gauge R&R, process capability studies, etc. to meet quality deliverables. Identify & retain customer-approved samples, control samples & defect limit samples if any. Oversee cleanroom activities by daily rounds to ensure that the production & assembly processes adhere to the planned controls and critical process parameters. Compile all the documents into respective Device Master Records. Review and maintain the inspection logs production and quality records daily. Review the Device History Files (DHF - for defect incidences, if any) & make certificates of analysis /or conformity to recommend product releases. Organize to collect samples, check for visual (physical) defects, e.g. color, texture & strength & locate imperfections; measure control dimensions. Periodically monitor, review & update the inspection & testing procedures, improvement is required. Find the root causes of defects & develop creative solutions using problem-solving techniques. Provide timely feedback to engineering & production regarding product non-conformity & ensure timely disposition of non-conforming products and closure of NCMRs. Ensure that changes & deviations, if any, are documented and are approved prior to implementation. Perform the tasks as may be required from time to time as assigned by the management. Strong attention to detail & documentation & the ability to provide professional & technical support. #IND Show more Show less

Company Details We are Hiring for Design engineer for one of the our reputed client in Ahmedabad. Key Responsibilities:  Meeting with clients at customer site and Inside Factory take actual hand sketch drawing.  Planning and executing mechanical designs using 2D-3D CAD programs.  Good Knowledge of calculate factors like tolerance, dimensions, and Bill of Material.  Proficiency with Measuring Instrument Like Vernier, Micrometer, Bore Gauge, Height Gauge.  Proficiency with engineering design programs such as AutoCAD, Solidworks and best practices.  Preparing drawing as per production requirements.  Exceptional time management and organizational skills.  Excellent verbal and written communication abilities.  Coordinate with Production for regular drawing for running project.  Able to work in a team environment. Qualifications:  Bachelor's degree in mechanical engineering.  Proficiency in AutoCAD and Solidworks.  A minimum of 2 years of experience as a mechanical design engineer.  Excellent negotiation, communication, and interpersonal skills. Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹30,000.00 per month Schedule: Day shift Supplemental Pay: Yearly bonus Work Location: In person

A Quality Control Engineer evaluates materials and products to determine if there are any deviations or defects. They work to ensure that the industry standards and specifications are met on the Customer end. Key Responsibilities/Accountabilities: Candidate having basic knowledge of Instruments e.g. Vernier Caliper, Micrometer, Bore gauge, Height gauge & Comparator, etc. Able to read and understand drawings. Education Qualifications: B.E. (Mech) / Diploma (Mech) / ITI Job Type: Full-time Pay: ₹20,000.00 - ₹30,293.95 per month Benefits: Health insurance Schedule: Day shift Supplemental Pay: Performance bonus Experience: total work: 1 year (Required) Work Location: In person

We're Hiring: Plano Miller Machine Operator Location: Sherophuli, West Bengal Company: Amic Forgings Pvt. Ltd. Email: hr@amicforgings.com WhatsApp Your Resume: 6290762349 Job Description: Amic Forgings Pvt. Ltd. is seeking a skilled and experienced Plano Miller Machine Operator for our unit located in Sherophuli . The ideal candidate must have hands-on experience with Plano Milling Machines, DRO (Digital ReadOut) systems, and be familiar with work code/job card processes . Key Responsibilities: Operate and monitor Plano Milling Machine for heavy machining work. Set up workpieces and fixtures as per job specifications. Read and interpret engineering drawings and job work codes accurately. Operate DRO systems for precision alignment and measurement. Perform in-process and final quality checks using standard measuring instruments. Conduct basic maintenance and ensure machine functionality. Record daily production data and update job card/work code status. Ensure compliance with safety and housekeeping standards . Candidate Requirements: Qualification: ITI / Diploma in Mechanical, Fitter, or equivalent. Experience: Minimum 3 years experience in Plano Milling operations. Skills Required: Proficient in using DRO systems . Understanding of work code/job card tracking . Ability to read and work from mechanical drawings . Skilled in handling measuring tools (vernier, micrometer, etc.). How to Apply: WhatsApp your resume to: 6290762349 Email: hr@amicforgings.com Join a company where precision meets performance. Location: Sherophuli | Industry: Forging & Heavy Machining Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹40,000.00 per month Benefits: Flexible schedule Health insurance Provident Fund Schedule: Day shift Morning shift Night shift Rotational shift Weekend availability Supplemental Pay: Overtime pay Performance bonus Yearly bonus Work Location: In person

We're Hiring: Plano Miller Machine Operator Location: Sherophuli, West Bengal Company: Amic Forgings Pvt. Ltd. Email: hr@amicforgings.com WhatsApp Your Resume: 6290762349 Job Description: Amic Forgings Pvt. Ltd. is seeking a skilled and experienced Plano Miller Machine Operator for our unit located in Sherophuli . The ideal candidate must have hands-on experience with Plano Milling Machines, DRO (Digital ReadOut) systems, and be familiar with work code/job card processes . Key Responsibilities: Operate and monitor Plano Milling Machine for heavy machining work. Set up workpieces and fixtures as per job specifications. Read and interpret engineering drawings and job work codes accurately. Operate DRO systems for precision alignment and measurement. Perform in-process and final quality checks using standard measuring instruments. Conduct basic maintenance and ensure machine functionality. Record daily production data and update job card/work code status. Ensure compliance with safety and housekeeping standards . Candidate Requirements: Qualification: ITI / Diploma in Mechanical, Fitter, or equivalent. Experience: Minimum 3 years experience in Plano Milling operations. Skills Required: Proficient in using DRO systems . Understanding of work code/job card tracking . Ability to read and work from mechanical drawings . Skilled in handling measuring tools (vernier, micrometer, etc.). How to Apply: WhatsApp your resume to: 6290762349 Email: hr@amicforgings.com Join a company where precision meets performance. Location: Sherophuli | Industry: Forging & Heavy Machining Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹40,000.00 per month Benefits: Flexible schedule Health insurance Provident Fund Schedule: Day shift Morning shift Night shift Rotational shift Weekend availability Supplemental Pay: Overtime pay Performance bonus Yearly bonus Work Location: In person

Role: Quality Control Executive Qualification: BE in Mechanical Engineering Experience: Fresher or 12 years Location: TTC MIDC, Rabale, Navi Mumbai Job Description: We are seeking a proactive and technically sound QC Executive with a BE in Mechanical Engineering to join our Quality team. The candidate should have fundamental knowledge of quality inspection techniques, ERP documentation, and a strong understanding of mechanical components and drawings. Roles and Responsibilities: Conduct quality inspections for incoming, in-process, and final products. Utilize precision measuring instruments like Vernier Calipers, Micrometers, Height Gauges, etc. Interpret and work with mechanical drawings and tolerances . Maintain inspection records and prepare quality documentation in the ERP system . Identify and report non-conformances and assist in root cause analysis. Support implementation of quality control plans and ISO procedures. Collaborate with production, design, and QA teams to maintain product quality. Candidate Profile: Bachelor’s Degree in Mechanical Engineering (BE Mechanical) Sound knowledge of mechanical components, drawings, and GD&T is preferred. Familiarity with ERP-based documentation systems. Good analytical and communication skills. Knowledge of ISO/QMS systems is an advantage. Detail-oriented with a strong commitment to quality and continuous improvement. Eligible and interested candidates to send their resume to reena@enrichtalents.com

Role: Quality Control (QC) Executive Qualification: Diploma in Mechanical Engineering Experience: Fresher or 12 years Location: TTC MIDC, Rabale, Navi Mumbai Job Description: We are looking for a dedicated and detail-oriented QC Executive to join our Quality team. The ideal candidate will have a Diploma in Mechanical Engineering and a basic understanding of measuring instruments and quality control procedures. Freshers or candidates with up to 2 years of experience are welcome to apply. Roles and Responsibilities: Perform in-process and final inspection of products as per quality standards. Use basic measuring instruments such as Vernier Caliper, Micrometer, Height Gauge, Dial Gauge, etc. Record inspection data accurately and maintain quality records. Assist in implementing and maintaining quality systems. Handle documentation and reporting in ERP system . Coordinate with production and QA teams to resolve quality issues. Ensure adherence to ISO/quality procedures. Candidate Profile: Diploma in Mechanical Engineering (Compulsory) Basic knowledge of mechanical drawings and tolerances. Familiarity with inspection tools and gauges. Exposure to ERP systems and documentation. Good communication and reporting skills. Willingness to learn and adapt in a manufacturing environment.

STEEL MANUFACTURING COMPANY Quality Engineer (Mechanical) Location- Liluah Plant, Howrah Qualification - Dip/B.Tech in ME Experience - 2-6 Year's in Quality inspection Salary- 15,000/- to 22,000/- + Lodging Duty- 8 Hours Contact- 9674659649

Working knowledge of measuring devices like vision Measurement System, Co-ordinate Measuring Machine, Video Measurement Machine, Digital Caliper, Micrometer, Height Gauge etc.. Reviewing of product requirements and specifications such as drawings. Preparing inspection plans, performing metrology activities and preparing FAI reports. Participating in FMEA / Control plan reviews and preparing FAI reports. Conducting the measurement system analysis (Gage R&R and attribute agreement studies). Issuance and retrieval of documents per control of documents procedure. Maintaining the calibration status of the measuring equipment by periodical tracking. Inspection of incoming raw materials, buyouts & packing materials per receiving quality plans. Issuing supplier corrective actions requests (SCAR) and controlling the supplier non conformities. Performing particle count testes & monitoring of bioburden tests for control of cleanrooms. Performing final inspections of pecked finished goods for product release. Inspection of products at start-up, in-process & end-up stages of production. Maintaining the manufacturing and inspection records in device history records (DHR). Participating in the investigation of nonconformities, such as root cause analysis. Preparing 8D report and implementing the corrective and preventive actions. Identifying & retaining the records per control of records procedure. Knowledge in programming of CMM & VMM inspection software and associated experience. Knowledge in the process qualification requirements (IQ, OQ & PQ) & experience in validation. 19 Experience in the use of tools of Minitab software such as measurement system analysis (Gage R&R and attribute agreement studies), process capability studies (CpK & PpK),etc.. Working knowledge & experience in implementation of the ISO 13485 standard. #IND Show more Show less

Key Responsibilities : Assist in performing quality checks and inspections of raw materials, in-process parts, and finished products. Learn and apply quality standards such as ISO, 5S, and other customer-specific requirements. Support documentation of inspection reports, deviations, and corrective actions. Collaborate with production and engineering teams to identify and resolve quality issues. Participate in internal audits and assist in process improvements. Conduct first-piece and final inspection under supervision. Understand and help enforce standard operating procedures (SOPs). Maintain proper records and data entry in quality management systems. Qualifications : B.Tech in Mechanical Engineering (recent graduate or up to 1 year of experience). Good academic understanding of quality control, manufacturing processes, and mechanical measurements. Skills Required : Basic knowledge of measurement instruments (Vernier caliper, micrometer, etc.). Understanding of mechanical drawings and GD&T (Geometric Dimensioning & Tolerancing) is a plus. Strong analytical and observation skills. Willingness to learn and work in a factory/shop floor environment. Good communication and interpersonal skills. Proficient in MS Excel, Word, and basic report writing. Job Type: Full-time Pay: ₹15,000.00 - ₹18,000.00 per month Benefits: Life insurance Provident Fund Schedule: Day shift Morning shift Work Location: In person

Job Summary: We are looking for a skilled and experienced CNC Setter Operator with hands-on experience in CNC Turning or Horizontal Machining Centers (HMC) with 4, 5, or 6 axis operations. The ideal candidate should have a strong understanding of machine setup, tool changes, and basic program adjustments to ensure high-precision machining. Key Responsibilities: Set up CNC turning or HMC machines (4/5/6 axis) as per job requirements Read and interpret engineering drawings, job orders, and blueprints Load and set tools, fixtures, and raw materials accurately Perform first piece inspection and make necessary offset corrections Ensure machines run efficiently with minimal downtime Monitor production and maintain required quality standards Conduct basic preventive maintenance of machines Troubleshoot machining or setup issues independently Maintain daily job reports and machine logs Requirements: ITI / Diploma in Mechanical or relevant trade 2–5 years of CNC setting experience in turning or multi-axis HMC machines Ability to read technical drawings and use measuring instruments (Vernier, Micrometer, Dial gauge Knowledge of tooling, cutting parameters, and precision machining Preferred Candidate: Experience in aerospace or precision component manufacturing Willing to work in shifts Strong attention to detail and quality . Job Type: Full-time Benefits: Food provided Provident Fund Schedule: Day shift Rotational shift Shift availability: Day Shift (Preferred) Night Shift (Preferred) Work Location: In person Application Deadline: 07/06/2025 Expected Start Date: 16/06/2025

We are seeking a detail-oriented and experienced Quality Engineer with a strong background in quality assurance within the automobile industry. The ideal candidate will possess in-depth knowledge of ISO and IATF standards, and hands-on experience in automotive component inspection and quality audits. Key Responsibilities: Ensure product quality meets defined standards and customer requirements. Conduct regular inspection and testing of automotive parts using standard measuring tools and equipment. Participate in internal and external audits related to ISO 9001 and IATF 16949. Prepare and maintain quality documents, reports, and inspection records. Identify root causes of quality issues and implement corrective and preventive actions (CAPA). Monitor production processes to ensure consistent product quality. Collaborate with cross-functional teams including Production, Design, and Supplier Quality to resolve quality issues. Train and guide operators and technicians on quality standards and procedures. Required Skills: Strong knowledge of ISO 9001 & IATF 16949 auditing processes. Hands-on experience in using quality inspection tools (Vernier Caliper, Micrometer, Height Gauge, CMM, etc.). Good understanding of GD&T and engineering drawings. Experience in preparing PPAP, FMEA, and Control Plans is a plus. Excellent problem-solving and analytical skills. Good communication and team collaboration skills. Preferred Industry: Automotive or Auto Components Manufacturing

1. Inspection of pipes (length of pipe, not in bad condition) 2. Supervise daily pipe production activities 3. Ensure safety and quality standards are followed 4. Good communication and teamwork skills 5. Willing to work in shifts (12 hours) 6. Vernier and micrometer knowledge Job Type: Full-time Pay: ₹10,500.00 - ₹12,500.00 per month Education: Diploma (Required) Experience: Pipi plant Supervisor: 1 year (Required) Work Location: In person

Company Description VKTECH PRECISION ENGINEERING LLP is a leading manufacturing organization at the forefront of technological advancements. We are committed to delivering high-quality products and services, demonstrating our dedication to excellence. Our team comprises experts in their respective fields, led by CEO Jambu Iyer, who has extensive experience in diamond tools, and COO Vighnesh Iyer, an expert in tool, mold, die, and special purpose machine design. Our research and development efforts have led to groundbreaking advancements, distinguishing us from our competitors. Job Description – Trainee (Quality Control & Production Supervision) Job Title: Trainee – Quality Control & Production Supervision Department: Production / Operations Reports To: Workshop Manager / PPC Engineer Location: Kabilpore GIDC , Navsari Type: Full-Time, Entry Level Commitment - 2 years Objective: To assist in maintaining product quality and ensuring smooth shopfloor operations by learning and applying quality inspection procedures and production supervision skills under guidance. Key Responsibilities: 🔧 A. Quality Control (QC) – Under Supervision Learn to perform basic visual and dimensional inspections of parts during and after production. Follow standard checklists and inspection procedures. Assist in identifying defective items and tagging them for rework or rejection. Maintain basic QC records such as checklists and reports. Support the preparation of Final Inspection Reports under QC head's guidance. 🏭 B. Production Supervision – On the Job Monitor the daily workflow on the shopfloor. Help allocate tasks to workers as per instructions from the PPC/Production head. Check that operators are following work instructions and quality practices. Maintain Daily Production Logs and submit end-of-day status reports. Ensure that basic safety and cleanliness rules are followed. Training & Support Provided: Orientation on product knowledge, QC tools, and process flow. Hands-on training in: Using measuring tools (vernier, micrometer, gauges) Reading job orders and technical drawings (basic) Maintaining documentation and logs Mentoring from the QC lead and Production In-Charge. Required Documentation to Handle (With Training): QC Checklists (In-process and Final) Non-Conformance Records (NCR) Daily Production Sheet Job Order Tracker Safety Observation Sheet Desired Candidate Profile: Diploma or Degree in Mechanical / Production / Industrial Engineering (or related) Good observation and learning ability Basic understanding of manufacturing concepts (taught in coursework) Willing to work hands-on in a factory/shopfloor environment Good discipline, punctuality, and record-keeping habits Performance Goals (After 3 Months Training): Can independently conduct basic in-process inspections Maintains QC and production records without errors Understands production flow and job priorities Helps identify and prevent quality issues Follows up on rework and rejected material Salary Range: ₹15k (will increase on the basis of the performance) Disclaimer - The candidate will be observed and monitored on their performance on the 1st month itself. If the company doesn't find the candidate suitable he/she may be replaced. Show more Show less

The candidate is responsible for supporting the development and implementation of quality control procedures. The role involves inspecting materials, monitoring production process and performing tests to maintain product quality and compliance. Required Candidate profile Perform dimensional and visual inspections using tools like calipers, micrometers, and gauges.Maintain accurate documentation of test results, inspection reports, and quality records.

looking for 2 axis and 5 axis vmc opertor for our plant manufacturing dies and mold by metal blocks from injection molding * Operate and set up VMC machines to produce tooling components. Interpret and understand engineering drawings and CAD models. Select appropriate tools, fixtures, and machining parameters. Load and unload workpieces and ensure proper clamping and alignment. Measure and inspect parts using precision instruments (Vernier, micrometer, height gauge, etc.). Monitor machine operations and make necessary adjustments. Perform minor machine maintenance and cleaning tasks. Coordinate with design and quality departments to ensure accurate production. Ensure compliance with safety and quality standards. Maintain production records and documentation. Troubleshoot machining issues and propose solutions. Requirements: ITI / Diploma in Mechanical, Tool & Die, or relevant field. 1+ years of experience operating VMC machines, preferably in a tool room environment. Experience with tool setting and offset adjustments. Good understanding of GD&T (Geometric Dimensioning and Tolerancing). Ability to work independently and read technical drawings. Strong attention to detail and quality focus. Job Type: Full-time Pay: ₹20,000.00 - ₹25,000.00 per month About us: At Orbitol Intelligence Pvt Ltd, we are building a center of excellence for high-precision engineering. Our focus is on manufacturing specialized moulds and dies used in the production of plastic, rubber, and metal components. Backed by a world-class toolroom equipped with advanced European machines, we aim to deliver unmatched accuracy and quality. Our vision is to become a trusted partner for precision tooling across automotive, industrial, and consumer sectors. We are assembling a team of passionate professionals committed to innovation, speed, and craftsmanship. Venue: PLOT NO. 1693,PHASE-1, HSIIDC,Rai Industrial Area Main Road,Sector 38,Rai Industrial Area,District: Sonipat,State: Haryana,PIN Code: 131001 Job Type: Full-time Pay: ₹10,568.55 - ₹28,035.98 per month Schedule: Morning shift Work Location: In person

1. Working Experience with FANUC Controlled Machines 2. Programming and set up CNC to complete new product/different functions. 3. Change the tooling of the CNC machine. 4. Observe machine operation to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining, using precision measuring instruments such as micrometer and dial caliper. 5. Adjust machine control, including part process and Rework Capability. 6. Verify “first piece inspection” using appropriate measuring instruments. 7. Maintain accurate data/records/documentation associated with your work. 8. Adhere to all organisation policies and procedures. ( Call between 10.00 AM to 04.00 PM ) Job Type: Full-time Pay: Up to ₹28,000.00 per month Benefits: Food provided Provident Fund Schedule: Rotational shift Supplemental Pay: Overtime pay Shift allowance Yearly bonus Experience: CNC programming: 3 years (Preferred) Job Types: Full-time, Permanent Pay: From ₹28,000.00 per month Benefits: Food provided Health insurance Provident Fund Schedule: Day shift Night shift Supplemental Pay: Overtime pay Shift allowance Experience: total work: 1 year (Preferred) Work Location: In person

We are looking for a diligent and technically skilled CNC Turning Machine Operator with 6 months to 1 year of experience , preferably in Tyre Building Machinery or similar precision machinery manufacturing. The ideal candidate should be capable of operating CNC turning machines, reading mechanical drawings, and maintaining machining quality standards. Key Responsibilities: Operate CNC turning machines to produce precision components as per drawings. Read and interpret engineering drawings, machining symbols, and tolerances. Load raw materials and set tools, workpieces, and machine parameters. Inspect finished parts using precision instruments (vernier caliper, micrometer, bore gauge, etc.). Ensure components meet dimensional and surface finish requirements. Monitor machine performance and ensure smooth, continuous operation. Perform routine machine maintenance, such as cleaning, lubrication, and coolant level checks. Report deviations or defects to the supervisor or quality team. Maintain shop floor cleanliness, tool care, and adhere to 5S and safety standards. Key Skills & Competencies: Basic knowledge of CNC turning operations, tools, and parameters. Ability to read and understand mechanical drawings and GD&T. Familiarity with measuring instruments and inspection methods. Understanding of machining tolerances and surface finish requirements. Awareness of safety practices in a machine shop environment. Willingness to work in shifts and learn advanced operations or programs. Basic knowledge of CNC controller interface (Fanuc/Siemens preferred). Preferred Experience: Exposure to machining of components used in tyre building machinery (e.g., drums, flanges, spindles, shafts, etc.). Experience with basic CNC program editing or offset changes is an added advantage. Job Type: Full-time Pay: ₹19,000.00 - ₹23,000.00 per month Schedule: Rotational shift Supplemental Pay: Overtime pay Work Location: In person