1615 Microcontroller Jobs - Page 25

What You’ll Do This role involves supporting designing analog and digital circuits for electronic sub-systems in the EV charger domain. Responsibilities include circuit validation through simulations, identifying cost-reduction opportunities for existing products, and participating in EMI/EMC and certification tests. The engineer will collaborate primarily with Product Development teams in Pune, contributing to Energy Transition & Digital Services (ETDS) initiatives. "1. Understanding of board-level power supplies, microelectronics, microcontroller-based systems, analog/digital circuits and sensors. Understanding of microcontroller/processor-based hardware design and integration. Good understanding to simulate electronic systems, including analog and digital components. Knowledge of electronics and embedded system design. Understanding of validation, verification and testing for embedded controller. Undestanding of tools like LTSpice/PSpice, Altium/OrCAD, and FEA tools for development. Strong soft skills, and resource optimization in design and manufacturing processes. Excellent oral and written communication skills. High aptitude for creativity, self-direction, and innovation. " Qualifications BE/ M Tech 3-5 years Skills Electronics and Electrical Engineering Communication skills, Drive for result, Accountability, Innovation ]]>

Dhruva Space is seeking a motivated and skilled Associate Firmware Engineer to join our innovative team. With 2 to 4 years of hands-on experience in embedded systems development, the ideal candidate will play a key role in advancing our cutting-edge projects. As part of a full-stack space engineering company, the Associate Firmware Engineer will be responsible for developing, debugging, and integrating firmware across various platforms and microcontroller architectures. This role requires strong technical expertise, collaboration with cross-functional teams, and the ability to contribute to the successful delivery of embedded systems solutions. Key responsibilities include, but are not limited to: Develop, test, and debug firmware for embedded systems using C/C++ programming languages. Work closely with hardware engineers to integrate firmware with hardware components, ensuring optimal system functionality. Design and develop device drivers for I2C, SPI, ADCs, DACs, and other related technologies. Perform firmware development, testing, debugging, and validation on Microcontrollers, FPGA, or similar, ensuring quality and functionality. Implement firmware on Linux, bare-metal systems and real time operating systems (RTOS) such as FreeRTOS, with a focus on system performance and reliability. Utilize embedded development tools such as JTAG, emulators, GDB, Trace32, and logic analyzers for debugging and system bring up. Work with cross functional teams across software, hardware, and manufacturing to ensure timely project execution and product development. Create and maintain technical documentation for firmware, testing procedures, and validation reports. Candidate Requirements: Bachelor’s degree in Electrical or Computer Engineering. 2-4 years in embedded systems firmware development. Proficient in C programming with a basic understanding of C++ and scripting languages like Python. Experience with communication protocols such as I2C, SPI, GPIO, and driver development. Hands-on experience with embedded tools such as GCC, GDB, Eclipse, JTAG, and logic analyzers. Hands-on experience with 16/32-bit microcontrollers, ARM-based systems, and FPGAs. Proficient in debugging techniques, hardware testing, and using tools like Trace32 and logic analyzers. Familiar with device trees, BSPs, and sensor integration (e.g., MIPI/CSI). Familiar with high-speed I/Os such as Ethernet, PCIe, and HBM. Experience with software development for systems with Linux OS or multi-threaded RTOS environments. Experience using Git, Jira, and Confluence for version control and project management. Strong communication skills and ability to work in cross-functional global teams across different time zones.

Accountabilities Must drive & achieve for all engineering aspects (on spec, on time delivery of software, support cross functional team) of an assigned Controls project. Must be able to estimate project timeline & resource allocation to meet the assigned project requirements. Identify dependencies and prioritize features based on business need. Review features/functionality to accept / reject the product / project specifications Define product Vision and govern technical roadmaps for assigned project. Drive Innovation within assigned project. Should be able to lead team, organizes, and moderates a regular Controls project team meeting. Should be able to lead activities to resolve incidents during the project and maintains information about the incidents and the measures (problem management). Handles all engineering change requests based on the standardized methods & processes and maintains the proper balance between the need of changes and the potential detrimental impact of changes (change management). . Must guide the team member, review the design and implementation of the code. Must ensures process compliance & regulatory compliance EXPERIENCE: About 10+ years of professional experience of which 3+ years should be as a team lead 5+ years in HVAC or manufacturing Industry 10+ years of experience as Embedded Software development Skills Proficiency in embedded programming C. Good to have real time operating system knowledge (e.g. Free RTOS) Experience in Agile working methodology. Proficiency in design and debugging skill. Strong analytical and problem-solving skills Proficient in end-to-end Project management and Knowing SDLC life cycle. Working on the varies Microcontroller and Understanding of Hardware interface UART, I2C, SPI protocol. Good to know wireless communication protocol (MODBUS, BLE, Wi-Fi, MQTT) Good people leadership skills and ability to collaborate with cross-functional, locational, and cultural teams. Strong communication skills to articulate views/thoughts with internal resources, partners, or customers. Ability to interface with global stakeholders, technology partners, and customers. Good analytical way of thinking and structured approach. Education Background Bachelor of Engineering / Technology - Electronics Engineer or Equivalent

As an R&D Executive, you will be responsible for leading and executing research and development activities for the creation of innovative and efficient products in the fields of AC & DC drivers, LED drivers, and solar charger Control for solar streetlight. Oversee the design and development of AC & DC drivers, LED drivers, and solar control chargers, focusing on multiple wattages and energy efficiency, durability, and cost-effectiveness. Design and develop firmware for microcontroller-based applications, including control algorithms for drivers and chargers. Lead the development of new products in alignment with market demands and consumer trends & ensure product development is cost-effective while maintaining competitive pricing strategies. Design high-quality PCBs, perform detailed circuit simulation, and optimize signal integrity while ensuring compliance with industry standards. Build prototypes and conduct extensive testing to assess product functionality, performance, and durability, while ensuring safety and regulatory compliance. Maintain comprehensive documentation of designs, testing, and product iterations, and provide regular updates to senior management on project progress. Conduct research on industry trends and competitor products to identify opportunities for product improvements and innovations. Ensure all designs meet industry standards and certifications minimizing design risks related to safety and environmental impact. Address complex technical issues during design and testing phases, ensuring the development of high-quality, reliable products.

Job Title:Embedded Software Design & Development Engineer – Automotive Department:Embedded Systems / Automotive Electronics Location:[Insert Location] Reporting To:Embedded Systems Lead / R&D Manager Job Summary:We are looking for a passionate and skilled Embedded Software Design & Development Engineer to join our automotive engineering team. The ideal candidate will play a key role in developing and validating embedded systems for advanced automotive applications. This role requires expertise in embedded C programming, microcontroller interfacing, serial communication protocols, and a strong understanding of both hardware and software debugging. Experience in AUTOSAR, RTOS, and diagnostics protocols is highly desirable. Key Responsibilities:Design, develop, and validate embedded software for automotive applications. Define software architecture and component-level design. Work with 8/16/32-bit and ARM microcontrollers to deliver efficient embedded solutions. Develop and debug code in Embedded C using standard compilers (IAR, GHS, etc.). Interface and communicate using I2C, SPI, UART, CAN, LIN protocols. Perform hardware and software debugging and support system integration. Collaborate with cross-functional teams including hardware, systems, and validation engineers. Maintain and enhance the embedded codebase adhering to MISRA guidelines and automotive standards. Must-Have Skills:Proficient in Embedded C programming. Hands-on experience with embedded hardware & systems. Strong experience with 8/16/32-bit microcontrollers and ARM architectures. Solid understanding of serial communication protocols – I2C, SPI, UART. Experience with CAN / LIN communications. Strong debugging skills – both hardware and software. Knowledge of embedded compilers such as IAR, GHS, etc. Good to Have:Knowledge of AUTOSAR architecture (Classic & Adaptive). Experience with Embedded C++, RTOS, and multicore processors. Familiarity with Software Defined Vehicles (SDV) and Service-Oriented Architectures. Understanding of Hypervisors, Dockers, Linux, and Yocto. Awareness of ASPICE, ISO26262, and Cybersecurity standards. Exposure to CAN-FD, Ethernet, and wireless communication protocols. Experience with BSW configuration tools like MCAL, RTE, CDD. Diagnostics protocols knowledge: UDS, KWP, DCM, DEM. Model-based design using MATLAB/Simulink. Familiarity with Bootloader development. Experience in Requirement Engineering (elicitation, analysis, feasibility). Understanding of V-cycle, SDLC, and configuration management. Testing knowledge: MIL, SIL, HIL, Unit Testing. Tools Experience (Good to Have):Requirements tools: IBM DOORS, Polarian. Architecture tools: MATLAB System Composer, Enterprise Architect, System Desk. Validation tools: DSPACE HILs, ETAS INCA, Vector CANape. Scripting: Python, Perl, m-script. Communication Analysis: Vector CANoe, CANalyzer. AUTOSAR tools: EB Tresos, Vector Da Vinci Developer, Configurator Pro, System Composer. Educational Qualification:B.E. / B.Tech / M.Tech in: Electrical Engineering Electrical & Electronics Engineering Electronics & Communication Engineering Preferred Attributes:Passion for cutting-edge automotive software development. Team player with good communication and problem-solving skills. Ability to adapt to dynamic project environments and meet tight deadlines.

Job Title:Embedded Software Design & Development Engineer – Automotive Department:Embedded Systems / Automotive Electronics Location:[Insert Location] Reporting To:Embedded Systems Lead / R&D Manager Job Summary:We are looking for a passionate and skilled Embedded Software Design & Development Engineer to join our automotive engineering team. The ideal candidate will play a key role in developing and validating embedded systems for advanced automotive applications. This role requires expertise in embedded C programming, microcontroller interfacing, serial communication protocols, and a strong understanding of both hardware and software debugging. Experience in AUTOSAR, RTOS, and diagnostics protocols is highly desirable. Key Responsibilities:Design, develop, and validate embedded software for automotive applications. Define software architecture and component-level design. Work with 8/16/32-bit and ARM microcontrollers to deliver efficient embedded solutions. Develop and debug code in Embedded C using standard compilers (IAR, GHS, etc.). Interface and communicate using I2C, SPI, UART, CAN, LIN protocols. Perform hardware and software debugging and support system integration. Collaborate with cross-functional teams including hardware, systems, and validation engineers. Maintain and enhance the embedded codebase adhering to MISRA guidelines and automotive standards. Must-Have Skills:Proficient in Embedded C programming. Hands-on experience with embedded hardware & systems. Strong experience with 8/16/32-bit microcontrollers and ARM architectures. Solid understanding of serial communication protocols – I2C, SPI, UART. Experience with CAN / LIN communications. Strong debugging skills – both hardware and software. Knowledge of embedded compilers such as IAR, GHS, etc. Good to Have:Knowledge of AUTOSAR architecture (Classic & Adaptive). Experience with Embedded C++, RTOS, and multicore processors. Familiarity with Software Defined Vehicles (SDV) and Service-Oriented Architectures. Understanding of Hypervisors, Dockers, Linux, and Yocto. Awareness of ASPICE, ISO26262, and Cybersecurity standards. Exposure to CAN-FD, Ethernet, and wireless communication protocols. Experience with BSW configuration tools like MCAL, RTE, CDD. Diagnostics protocols knowledge: UDS, KWP, DCM, DEM. Model-based design using MATLAB/Simulink. Familiarity with Bootloader development. Experience in Requirement Engineering (elicitation, analysis, feasibility). Understanding of V-cycle, SDLC, and configuration management. Testing knowledge: MIL, SIL, HIL, Unit Testing. Tools Experience (Good to Have):Requirements tools: IBM DOORS, Polarian. Architecture tools: MATLAB System Composer, Enterprise Architect, System Desk. Validation tools: DSPACE HILs, ETAS INCA, Vector CANape. Scripting: Python, Perl, m-script. Communication Analysis: Vector CANoe, CANalyzer. AUTOSAR tools: EB Tresos, Vector Da Vinci Developer, Configurator Pro, System Composer. Educational Qualification:B.E. / B.Tech / M.Tech in: Electrical Engineering Electrical & Electronics Engineering Electronics & Communication Engineering Preferred Attributes:Passion for cutting-edge automotive software development. Team player with good communication and problem-solving skills. Ability to adapt to dynamic project environments and meet tight deadlines.

- Experienced in microcontroller based control systems for HVAC systems. - Experienced in closed loop system designs, tuning systems. - Good experience in HVAC development, Electronic Expansion Valve controls, Variable Refrigerant flow systems Required Candidate profile - Strong experience with C/C++ and microcontroller platforms. - Solid knowledge of control systems and HVAC functionality. - Experience with EXV and VRF algorithm development.

Skills Required: Strong technical foundation and proven hands-on experience in both AI/ML and IoT concepts and technologies. Ability to guide students in building integrated AIoT projects . Must be able to confidently explain and simplify complex AI, ML, and IoT concepts, including their interdependencies and applications, for diverse age groups and academic levels. Excellent communication skills in English and Hindi (both verbal and written). Strong planning and time management abilities. Strong public speaking and presentation skills. Comfortable handling large groups and tailoring delivery methods to suit different institutions. Excellent stakeholder management handling clients, academic institutions, and internal teams. Willingness to take up training responsibilities as required. Role & responsibilities Lead Training Sessions: Conduct engaging and high-impact AIML and IoT lead trainings across colleges, schools, and premier institutions PAN India. Mentorship & Team Training: Train, guide, and mentor junior trainers from PHN Technology, ensuring content and delivery consistency in AI/ML and IoT. Content Development: Develop and continuously update training materials, live projects, and demos, focusing on real-world AI IoT use cases and practical implementations. Travel Readiness: Willingness and ability to travel extensively across India for conducting workshops and sessions as per schedule. Preferred candidate profile We are looking for a passionate and technically sound professional with a strong foundation in AI/ML, IoT , IoT based Cloud platforms , AIOT. The ideal candidate should have a minimum of 5+ years of relevant experience in teaching, corporate training, or industry roles. A strong command over communication (both verbal and written) in English and Hindi is essential, along with the ability to clearly explain and simplify complex concepts to learners across diverse age groups and academic levels. Candidates should possess excellent public speaking and presentation skills , and be comfortable delivering sessions to large groups while tailoring the content as per institutional needs

Job Title: Firmware Python Developer Location: Mumbai Experience: 4-5 years Department: R&D / Product Development Job Type: Full-time Work from Office About The Role We are looking for a skilled Firmware Python Developer to join our technology team. You will be responsible for developing, testing, and optimizing firmware solutions for our smart automation devices. Your primary role will be to write and manage Python-based firmware scripts that run on microcontrollers and IoT platforms. Key Responsibilities Design and develop embedded firmware in Python (MicroPython/CircuitPython) for smart automation devices. Work closely with hardware engineers to interface sensors, relays, Zigbee modules, and other peripherals. Develop and test low-level drivers, communication protocols (UART, I2C, SPI), and real-time device behavior. Optimize firmware for memory and performance constraints on Linux based processor (Raspberry Pi etc.). Implement OTA (Over-the-Air) update mechanisms and secure boot processes. Debug hardware-software integration issues using tools like JTAG, logic analyzers, etc. Document code, APIs, and firmware change logs. Collaborate with the app, cloud, and testing teams for end-to-end product integration. Must-Have Skills Proficient in Python, with hands-on experience in MicroPython/CircuitPython. Strong understanding of embedded systems, RTOS, and microcontroller architecture. Experience working with ESP32, Raspberry Pi, or similar platforms. Knowledge of Zigbee, Bluetooth, Wi-Fi, or other IoT protocols. Experience with Git, JIRA, and CI/CD tools. Good understanding of electronics schematics and debugging tools. Good To Have Familiarity with C/C++ for embedded systems. Experience in home automation or IoT products. Knowledge of power optimization, bootloaders, and secure firmware development. Exposure to Zigbee stack integration or development. Educational Qualification Bachelor’s or Master’s degree in Electronics, Computer Science, Embedded Systems, or related fields. Skills: spi,i2c,r&d,micropython,c/c++,jira,apis,jtag,wi-fi,esp32,bootloaders,bluetooth,python,ota,zigbee,circuitpython,rtos,git,uart,relays,communication protocols,ci/cd tools,electronics schematics,raspberry pi,iot products,home automation,interface sensors,low-level drivers,microcontroller architecture,logic analyzers,zigbee modules,firmware python,iot protocols,document code,power optimization,linux based processor,firmware change logs,secure firmware development,real-time device behavior,collaborate with the app

Role Overview: We are looking for motivated and skilled Embedded Software Engineers who have a strong foundation in embedded system development and are excited to work at the intersection of hardware and software. This role involves hands-on development, debugging, and optimization of embedded applications for real-world industrial and consumer electronics systems. Key Responsibilities: Design, develop, and maintain embedded software for microcontroller-based platforms. Work closely with the hardware engineering team for system integration, bring-up, and debugging. Write efficient, reusable, and reliable C/C++ code for embedded applications. Interface with hardware peripherals such as I2C, SPI, UART, ADC, PWM, and integrate sensor/actuator drivers. Optimize system performance for real-time operation and low power consumption. Utilize embedded development environments (e.g., Code Composer Studio, MPLAB, etc.). Conduct unit testing, code reviews, and hardware-in-the-loop (HIL) testing to ensure code quality. Required Skills & Qualifications: Bachelors degree in Electronics & Communication Engineering or equivalent. 1–2 years of hands-on experience in embedded software development. Strong understanding of digital and analog hardware fundamentals. Proficient in embedded C; working knowledge of C++ is a plus.

Job Title: Embedded Software Development Engineer Job Location: Bengaluru, India About Veoneer: Veoneer is a world leader, and over the years, Veoneer has delivered more than 1.1 billion electronic control units and crash sensors to car manufacturers globally. Owned by AIP and headquartered in the U.S. Veoneer has approximately 2,550 employees in 11 countries. What you'll do : Analyze Software Requirements and Prepare Low level requirements and traceability documentation Architecture and Detail Design in EA Develop Software and Functional testing with specified methods and processes Perform Integration Test Execution for the Test Plan Develop Test Scripts using J-Scripts and Python Scripts Requirement gathering Design and Source code programming Should be able to analyses the issue reported and fix the same if required Test specification preparation and testing Integrating the AUTOSAR/ BSW components and application Establish and adhere to estimates in project work plan for assigned tasks Provide regular updates of assigned task progression to Test lead for project planning, tracking and oversight Identify or propose product process or infrastructure improvements What you'll bring: Hands on Passive Safety Domain experience Experience in AUTOSAR based Software Development Good hold on Embedded C and assembly programming languages Experience in CAN and UDS protocol development Experience in RTE configuration Experience in Fault Handler, DEM, EOL, EDR modules development added advantage Experience in Cyber Security (Secure Flash, Secure Boot, HSM) modules development will be added advantage Hands-on experience in Software Architecture and Detail Design documentation using Enterprise Architect tool. Hands-on experience in Automotive development tools like Vector Geny, Da-Vinci, Tresos Hands-on experience in Automotive testing tools like CANoe, CANalyzer, CANstress and also on Flashing techniques. Experience in development of Application development like Diagnostics/ Communication stack/ MCAL/ NVRAM/ Bootloader Good knowledge on microcontroller architecture, memory layouts, device drivers, compiler and debuggers Good knowledge on Automotive protocols like CAN/ SPI Good Knowledge on ASPICE, ISO26262, MISRA Guidelines Good Knowledge on Software Debugging & Test methodology Experience in configuration management, change management methodologies Preferred Qualification: BE / BTech / ME / MTech

Job details Employment Type : Full-Time Location : Mehsana, Gujarat, India Job Category : Engineering Job Number : WD30223325 Job Description #LI-DS2 ACCOUNTABILITIES: Must drive & achieve for all engineering aspects (on spec, on time delivery of software, support cross functional team) of an assigned Controls project. Must be able to estimate project timeline & resource allocation to meet the assigned project requirements. Identify dependencies and prioritize features based on business need. Review features/functionality to accept / reject the product / project specifications Define product Vision and govern technical roadmaps for assigned project. Drive Innovation within assigned project. Should be able to lead team, organizes, and moderates a regular Controls project team meeting. Should be able to lead activities to resolve incidents during the project and maintains information about the incidents and the measures (problem management). Handles all engineering change requests based on the standardized methods & processes and maintains the proper balance between the need of changes and the potential detrimental impact of changes (change management). . Must guide the team member, review the design and implementation of the code. Must ensures process compliance & regulatory compliance EXPERIENCE: About 10+ years of professional experience of which 3+ years should be as a team lead 5+ years in HVAC or manufacturing Industry 10+ years of experience as Embedded Software development SKILLS: Proficiency in embedded programming C. Good to have real time operating system knowledge (e.g. Free RTOS) Experience in Agile working methodology. Proficiency in design and debugging skill. Strong analytical and problem-solving skills Proficient in end-to-end Project management and Knowing SDLC life cycle. Working on the varies Microcontroller and Understanding of Hardware interface UART, I2C, SPI protocol. Good to know wireless communication protocol (MODBUS, BLE, Wi-Fi, MQTT) Good people leadership skills and ability to collaborate with cross-functional, locational, and cultural teams. Strong communication skills to articulate views/thoughts with internal resources, partners, or customers. Ability to interface with global stakeholders, technology partners, and customers. Good analytical way of thinking and structured approach. EDUCATION BACKGROUND: Bachelor of Engineering / Technology - Electronics Engineer or Equivalent

Job description: Become a Part of the Marelli team. We are a global independent automotive supplier with a passion for performance and speed. We are pioneers of the future of mobility. Our story is built on innovation and manufacturing excellence. Every day, we drive change and co-create what comes next. Our purpose is simple yet ambitious: "Let's push the boundaries together. We aspire to shape future mobility dreams and turn them into reality.” Joining the Marelli Electronics team means becoming a part of something bigger, a place where you can explore your potential, pioneer innovation. As a global yet fast-evolving company, we're looking for team members who want to grow and evolve with us. About the Position: We are looking for a Customer Quality Specialist to join the Plant Quality / Electronics team, reporting directly to the Plant Quality Manager. This position is based at our office in Manesar. Your Responsibilities will be: 1. Reduction in customer PPM, Enhanced Customer Ranking/scorecard & Improve Customer Satisfaction Scores 2. Serve as the primary quality liaison between customers and internal teams (Engineering, Manufacturing, Supply Chain, Program Management). 3. Address customer complaints, quality issues, and warranty claims from the customers. Closures of all the claims within the given timelines. 4. Ensure timely resolution of customer concerns through structured problem-solving methods (F3A, 8D, 5Why, Fishbone, etc.). 5. Lead root cause investigations for reported claims/defects from customer 6. Collaborate with cross-functional teams to implement corrective and preventive actions (CAPA). 7. Validate effectiveness of corrective measures through testing and data analysis 8. Analyze quality performance metrics (PPM, Defect Rates) and drive improvements. 9. Support New Product Introduction by reviewing Lesson Learnt and process FMEAs. 10. Promote Zero-Defect culture within the organization. 11. Conduct on-site visits to customer/supplier locations for quality discussions as needed, facilitate customer audits and ensure timely closure of findings. 12. Proficient in Quality Core Tools Like : PPAP, APQP, FMEA, SPC, MSA, Control Plan 13. Knowledge of SMT process, soldering standards (IPC-A-610), Robotic Soldering’s, EOL testing, ESD [Electrostatic Discharge] 14. Monitor and ensure compliance with customer-specific quality requirements like PPAP, CARV, 4M & SMIR Report, IMDS. 15. Specific CSR : MSIL VSA Audit, Stellantis MPA Audit, VW/SK : VDA Audits, Be0N Submission, Suzuki : SIS-P Requirements. 16. to initiate segregation at customer end & at plant level to protect the customer in case of any claim from the customer. 17. Knowledge of customer portals. To communicate & ensure the customer quality manual, CSR requirements are met with the organization. What Qualifications you will bring: B.E./B.Tech in ECE/ME [with specialization in Automotive Electronics Prefererable] [1] 6 to 8 Yrs. of exp in Automotive Sector and Customer Quality/ Engineering Management [2] 3~5 Years Experience on Electronic Components Other skills that we would welcome: Knowledge of Automotive Embedded electronic product( Instrument Cluster ) Knowledge of electrical components viz. Microcontroller, Regulator, Capacitors, Resistor etc. and interpretation of their data sheets Knowledge of Embedded systems Experience in using various instruments CRO,Spectrum Analyzer,Multimeter etc. Coomunication Skills, Relationship Building Design knowledge of Integration of product in vehicle following simulation experience Knowledge of IATF 16949 & Quality Core Tooles Working Knowledge of ICT,EOL Bench Able to understand Schemtic from Product drawing Expectations from you in this position: Customer Satisfactions [Details of Analysis, Response Time, Warranty Cost Reduction, Customer Quality KPIs] Team Bonding What does this position offer you: Fast-paced yet supportive and high-performing international team with an inspiring ambition to transform the future of mobility. Support in onboarding and further training that will set you up with Marelli's speed. Take the next step: Together, we will drive the world towards a safer, greener, and better-connected future. Are you ready to make your mark, shape the future of the automotive industry, and drive the growth of the Electronics business? Talk to us! To apply, submit your application via [Website, such as LinkedIn]. About Us: Marelli is one of the world’s leading global independent suppliers to the automotive sector, with a strong and established track record in innovation and manufacturing excellence. Our goal is to change the future of mobility by working with our customers and partners to create a safer, greener, and more connected world. Our team supplies all major automotive manufacturers in Asia, Europe, and North and South America and the top racing teams in motorsport world championships. Our technology is purpose-driven and meticulously designed to deliver tangible value that truly matters to our customers. Our business areas are automotive lighting and sensing, thermal solutions, electronics, green technology solutions, interior experience, propulsion solutions (e-powertrain and powertrain), ride dynamics, motorsport, and aftermarket business. Within the walls of Marelli, we believe in enabling people to do their best work. Our cultural attributes - Drive Results, Accountable, Entrepreneurial, Inclusive, Innovative, and Aware - are the cornerstones of a new Marelli culture. Be part of it! At Marelli, we believe in the importance of diversity and inclusion in our workplace. We are committed to nurturing talent in our diverse environment, and we take pride in our various employee resource groups, such as Marelli Women, Brains & Hearts Wellbeing, All Cultures, and Marelli's Rainbow. We believe these groups foster creativity and innovation through the unique perspectives of a multicultural community.

Education :- B.Tech / Diploma Experience :- 2-5 year Skill :- Strong in C, C++, embedded C and assembly language, 8/16/32 bit microcontrollers Good in understanding, interfacing and debugging Design functional modules according to requirements

Roles and Responsibilities: Design and develop embedded software applications for microcontrollers and real-time systems. Work on board bring-up, firmware development, and integration with hardware components. Program using C/C++ for embedded systems and work with RTOS or bare-metal environments. Interface with hardware teams to understand schematics and resolve low-level technical issues. Develop and integrate drivers for I2C, SPI, UART, CAN, and other interfaces. Perform unit testing, system-level debugging, and code optimization. Maintain detailed documentation for code, interfaces, and system designs. Collaborate with cross-functional teams including QA, Hardware, and Product Managers. Requirements:  5 + years of strong hands-on experience in embedded systems development. Strong proficiency in C, C++, and Embedded C  Experience with microcontroller programming (e.g., ARM Cortex-M, STM32, ST, Renesas, ESP32).  Experience in using energy meter in firmware development Mandatory  Experience in using microcontroller like Renesas is highly preferred.  Solid understanding and implementation experience with communication protocols: I2C, SPI, UART, CAN  Who must have experience in hard core coding.  Experience in firmware development, including: Writing, testing, and maintaining embedded software Low-level hardware interfacing and register-level programming  Knowledge of device driver development for peripherals like sensors.  Work closely with hardware engineers to ensure seamless integration between software and hardware.  Basic knowledge of electronics circuit design.

FPGA Developer --> --> Location, Designation --> LocationRemote DesignationFPGA Developer Experience7- 9 Years Skills required: 1. Should have worked on USRP N310/X310 (N3xx/X3x0) 2. In-depth Knowledge of FPGA Architecture 3. Able to write own RTL custom HDL or drops in IP a) VHDL, Verilog, System,Verilog, Vivado HLS b) Xilinx IP, Vivado Block Diagram 4. Should have developed RFNoC Block 5. Have working knowledge of USRP Hardware Driver (UHD) 6. Able to write custom FPGA logic in RFNoC Blocks 7. Able to use library of existing RFNoC Blocks a) FFT, FIR, Signal Generator, Fosphor 8. Have understanding of GNU Radio interface to RFNoC Block 9. FPGA debugging and HW/SW integration 10. Thorough understanding of appropriate coding styles for FPGAs, and trade-offs for density and speed 11. In-depth knowledge of XILINX ZYNQ 71xx/pl-kINTEX-7 based RFNoC architecture is must. 12.Understand Customer requirements, define architecture and detailed design 13. Good Customer Communication Skills 14. Working knowledge of Agile Feel Free To Contact Us...!!! Submit

Job Title: Embedded Firmware Architect Company – Zydus Medtech Pvt Ltd Location - Ahmedabad Key Roles & Responsibilities Design, develop, and maintain embedded firmware for microcontrollers and embedded systems. Experience working in 16/32-bit Micro-controllers/Microprocessor with strong understanding of controller architecture and peripherals. Collaborate with hardware engineers to integrate firmware with hardware components. Develop and debug low-level drivers for peripherals such as UART, SPI, I2C, CAN, USB, etc. Optimize firmware for performance, memory usage, and power consumption. Conduct unit testing, integration testing, and system validation. Participate in code reviews and maintain high standards of code quality and documentation. Support product development from concept through production and post-launch maintenance. Desired Experience Expertise programming skills in C/C++ for embedded systems. Experience with RTOS (e.g., FreeRTOS, ThreadX) and bare-metal programming. Familiarity with microcontrollers from vendors like STM32, NXP, TI, Microchip, NRF, etc. Knowledge of communication protocols: UART, SPI, I2C, CAN, USB, BLE, Wi-Fi, LCD, Touch screen Experience with debugging tools such as JTAG, oscilloscopes, logic analyzers, Function generators Understanding of firmware development, lifecycle and version control systems (e.g., Git). Exposure to safety-critical or real-time systems is a plus. In depth knowledge of real time control algorithms, data processing and performance optimization Experience in power management in microcontroller/microprocessor. Strong analytical and debugging skills Experience working with industry standard tools for development, /testing/configuration management/bug tracking. Essential Qualifications Education: B.Tech/M.Tech in Electronics, Electrical, Computer Engineering, or related field. Experience: Minimum 6 years in embedded firmware development.

Job details Employment Type : Full-Time Location : Mehsana, Gujarat, India Job Category : Engineering Job Number : WD30223325 Job Description #LI-DS2 ACCOUNTABILITIES: Must drive & achieve for all engineering aspects (on spec, on time delivery of software, support cross functional team) of an assigned Controls project. Must be able to estimate project timeline & resource allocation to meet the assigned project requirements. Identify dependencies and prioritize features based on business need. Review features/functionality to accept / reject the product / project specifications Define product Vision and govern technical roadmaps for assigned project. Drive Innovation within assigned project. Should be able to lead team, organizes, and moderates a regular Controls project team meeting. Should be able to lead activities to resolve incidents during the project and maintains information about the incidents and the measures (problem management). Handles all engineering change requests based on the standardized methods & processes and maintains the proper balance between the need of changes and the potential detrimental impact of changes (change management). . Must guide the team member, review the design and implementation of the code. Must ensures process compliance & regulatory compliance EXPERIENCE: About 10+ years of professional experience of which 3+ years should be as a team lead 5+ years in HVAC or manufacturing Industry 10+ years of experience as Embedded Software development SKILLS: Proficiency in embedded programming C. Good to have real time operating system knowledge (e.g. Free RTOS) Experience in Agile working methodology. Proficiency in design and debugging skill. Strong analytical and problem-solving skills Proficient in end-to-end Project management and Knowing SDLC life cycle. Working on the varies Microcontroller and Understanding of Hardware interface UART, I2C, SPI protocol. Good to know wireless communication protocol (MODBUS, BLE, Wi-Fi, MQTT) Good people leadership skills and ability to collaborate with cross-functional, locational, and cultural teams. Strong communication skills to articulate views/thoughts with internal resources, partners, or customers. Ability to interface with global stakeholders, technology partners, and customers. Good analytical way of thinking and structured approach. EDUCATION BACKGROUND: Bachelor of Engineering / Technology - Electronics Engineer or Equivalent

Job description: Become a Part of the Marelli team. We are a global independent automotive supplier with a passion for performance and speed. We are pioneers of the future of mobility. Our story is built on innovation and manufacturing excellence. Every day, we drive change and co-create what comes next. Our purpose is simple yet ambitious: "Let's push the boundaries together. We aspire to shape future mobility dreams and turn them into reality.” Joining the Marelli Electronics team means becoming a part of something bigger, a place where you can explore your potential, pioneer innovation. As a global yet fast-evolving company, we're looking for team members who want to grow and evolve with us. About the Position: We are looking for a Customer Quality Specialist to join the Plant Quality / Electronics team, reporting directly to the Plant Quality Manager. This position is based at our office in Manesar. Your Responsibilities will be: 1. Reduction in customer PPM, Enhanced Customer Ranking/scorecard & Improve Customer Satisfaction Scores 2. Serve as the primary quality liaison between customers and internal teams (Engineering, Manufacturing, Supply Chain, Program Management). 3. Address customer complaints, quality issues, and warranty claims from the customers. Closures of all the claims within the given timelines. 4. Ensure timely resolution of customer concerns through structured problem-solving methods (F3A, 8D, 5Why, Fishbone, etc.). 5. Lead root cause investigations for reported claims/defects from customer 6. Collaborate with cross-functional teams to implement corrective and preventive actions (CAPA). 7. Validate effectiveness of corrective measures through testing and data analysis 8. Analyze quality performance metrics (PPM, Defect Rates) and drive improvements. 9. Support New Product Introduction by reviewing Lesson Learnt and process FMEAs. 10. Promote Zero-Defect culture within the organization. 11. Conduct on-site visits to customer/supplier locations for quality discussions as needed, facilitate customer audits and ensure timely closure of findings. 12. Proficient in Quality Core Tools Like : PPAP, APQP, FMEA, SPC, MSA, Control Plan 13. Knowledge of SMT process, soldering standards (IPC-A-610), Robotic Soldering’s, EOL testing, ESD [Electrostatic Discharge] 14. Monitor and ensure compliance with customer-specific quality requirements like PPAP, CARV, 4M & SMIR Report, IMDS. 15. Specific CSR : MSIL VSA Audit, Stellantis MPA Audit, VW/SK : VDA Audits, Be0N Submission, Suzuki : SIS-P Requirements. 16. to initiate segregation at customer end & at plant level to protect the customer in case of any claim from the customer. 17. Knowledge of customer portals. To communicate & ensure the customer quality manual, CSR requirements are met with the organization. What Qualifications you will bring: B.E./B.Tech in ECE/ME [with specialization in Automotive Electronics Prefererable] [1] 6 to 8 Years of exp. in Automotive Sector and Customer Quality/ Engineering Management [2] Minimum 3~5 Years of Experience on Electronic Components Other skills that we would welcome: Knowledge of Automotive Embedded electronic product( Instrument Cluster ) Knowledge of electrical components viz. Microcontroller, Regulator, Capacitors, Resistor etc. and interpretation of their data sheets Knowledge of Embedded systems Experience in using various instruments CRO,Spectrum Analyzer,Multimeter e.t.c Coomunication Skills, Relation ship Building Design knowledge of Integration of product in vehicle following simulation experience. Knowledge of IATF 16949 & Quality Core Tooles Working Knowledge of ICT,EOL Bench Able to understand Schemtic from Product drawing Expectations from you in this position: Customer Satisfactions [Details of Analysis, Response Time, Warranty Cost Reduction, Customer Quality KPIs] Team Bonding. What does this position offer you: Fast-paced yet supportive and high-performing international team with an inspiring ambition to transform the future of mobility. Support in onboarding and further training that will set you up with Marelli's speed. A hybrid work model, helping you to achieve work-life balance-combining the best of both spending time working remotely, benefitting from focus time, and purposeful co-creation time in the office. Take the next step: Together, we will drive the world towards a safer, greener, and better-connected future. Are you ready to make your mark, shape the future of the automotive industry, and drive the growth of the [Division] business? Talk to us! To apply, submit your application via [Website, such as LinkedIn]. About Us: Marelli is one of the world’s leading global independent suppliers to the automotive sector, with a strong and established track record in innovation and manufacturing excellence. Our goal is to change the future of mobility by working with our customers and partners to create a safer, greener, and more connected world. Our team supplies all major automotive manufacturers in Asia, Europe, and North and South America and the top racing teams in motorsport world championships. Our technology is purpose-driven and meticulously designed to deliver tangible value that truly matters to our customers. Our business areas are automotive lighting and sensing, thermal solutions, electronics, green technology solutions, interior experience, propulsion solutions (e-powertrain and powertrain), ride dynamics, motorsport, and aftermarket business. Within the walls of Marelli, we believe in enabling people to do their best work. Our cultural attributes - Drive Results, Accountable, Entrepreneurial, Inclusive, Innovative, and Aware - are the cornerstones of a new Marelli culture. Be part of it! At Marelli, we believe in the importance of diversity and inclusion in our workplace. We are committed to nurturing talent in our diverse environment, and we take pride in our various employee resource groups, such as Marelli Women, Brains & Hearts Wellbeing, All Cultures, and Marelli's Rainbow. We believe these groups foster creativity and innovation through the unique perspectives of a multicultural community.

Embedded SW- Pune leads(5+yrs is also fine) Microcontroller, Cortex/ARM C/C++ Programming, BLDC motor Understanding motor control algorithms such as the sensored, Sensorless, field-oriented control. Background with Cortex-M series embedded SW development in C Extensive experience with real time embedded software engineering and control design Proficiency in C languages for embedded software and object-oriented programming (C++) Experience to develop automotive serial communication such like LIN and CAN Full software lifecycle experience (ASPICE L2) Analyse, review, manage and trace software requirements. Proficiency in debugging complex issues. Proficiency in understanding complex software architecture definition that leads to software code development. GitLab, or any other version control and issue tracking systems Familiarity with hardware communication protocols such as SPI, I2C, UART. Participate in coding reviews using Code Collaborator Familiarity with software compilers such as IAR Workbench or ARM Keil Use oscilloscopes, logic analysers and other hardware related inspection tools Challenge workflows and recommend processes for improvement.

C, ESP8266/ESP32, RTOS, Device Drivers, Embedded firmware development, Serial Programming, Configuration Management & Linux,Embedded Development using ESP8266, ESP32,FreeRTOS, Zephyr, IoT etc,C/C++ programming & Linux,Microcontroller Development

Hands on experience of CRDi And /OR MPFI. - Hands on experience of ECU interface with sensors / actuators / engine harness. - Experience of Validation of OBD calibration. - Experience of AIS 004 EMI EMC testing and certification. - Hands on experience of CAN Bus, CAN Bus protocols, IVN, Peak CAN tools, Diagnostics tools. - Hands on experience of IGS, starters and Generators. - Hands on experience of Gasoline Ignition System. - Hands on experience of ECU software like INCA / VISU / CALTERM / CANoe / CAN Analyser. - Knowledge of environmental validations. - Knowledge of Automotive battery and charge balance process. - Knowledge of microcontroller and its interfacing with sensor / actuator.

At Capgemini Engineering, the world leader in engineering services, we bring together a global team of engineers, scientists, and architects to help the worlds most innovative companies unleash their potential. From autonomous cars to life-saving robots, our digital and software technology experts think outside the box as they provide unique R&D and engineering services across all industries. Join us for a career full of opportunities. Where you can make a difference. Where no two days are the same. Your Role Develop and maintain backend systems using C. Write and optimize SQL queries for data handling. Use Unix tools and scripting for automation. Collaborate with teams to ensure system reliability and performance. Your Profile Strong programming skills in C with hands-on development experience. Proficient in writing and optimizing SQL queries. Solid understanding of Unix/Linux systems and shell scripting. Experience in debugging and performance tuning in Unix environments. Familiarity with version control systems like Git is a plus. What youll love about working with us Flexible work optionsremote and hybrid Competitive salary and benefits package Career growth with SAP and cloud certifications Inclusive and collaborative work environment Location - Bengaluru,Chennai,Gandhinagar,Gurugram,Hyderabad,Kolkata,Mumbai,Noida,Pune

Bachelors or Masters degree with 5-10 years of technical experience in FTI. Proven skills in FTI customization and configuration, Requirement Gathering and Design Experienced TI Plus full life cycle implementation - technical installation of products, environment setup, technical testing support, SIT, UAT, Dress rehearsal support, documentation and Go-live support Extensively worked on integration of FTI with Fusion Essence, FCC, DMS,FX, Data Migration and Watch List Check, Worked with Finastra Enigma Development team (L3 support) for the various SFDC/JIRA defects reported for Fusion Trade innovation logged by different clients. Designed and developed tool Trade interface Manager, upstream and downstream communications for FTI Ability to work independently and within a team in a culturally diverse environment, exceptional ability to maintain and build client relationships. SDK and CustomizationCustomization of product based on client specific requirements and business transactions. This includes event based and product (master) based extra field's addition to products activities for trade products. Also, the use Advance SDK to create new workflow in TIPlus FTI Data migrationData Migration is responsible for overall data migration activities & collaborate with cross-functional teams, analyze data requirements, and ensure the integrity, accuracy, and completeness of the migrated data. This role requires deep knowledge of Finastra trade finance application system, data mapping, transformation, migration strategies & Reconciliations. Works in the area of Software Engineering, which encompasses the development, maintenance and optimization of software solutions/applications.1. Applies scientific methods to analyse and solve software engineering problems.2. He/she is responsible for the development and application of software engineering practice and knowledge, in research, design, development and maintenance.3. His/her work requires the exercise of original thought and judgement and the ability to supervise the technical and administrative work of other software engineers.4. The software engineer builds skills and expertise of his/her software engineering discipline to reach standard software engineer skills expectations for the applicable role, as defined in Professional Communities.5. The software engineer collaborates and acts as team player with other software engineers and stakeholders. Primary Skills InterfacingWorked on system specific message processing, interfacing components like transport clients and servers, development of interface components. Integration of client specific third-party applications into existing system for workflow. Integration TIPlus to bank's email server, banks document management system, SWIFT alliance using Finastra Massage manager or as a tandalone plugin. Batch ConfigurationHands on experience on developing the Custom control actions for batch execution. Hands on configuring batch actions into TI+ through batch setup and batch job executions for Start of day, End of day, start of business hours etc. SDK and Screen TailoringScreen tailoring of TI+ using the T+ custom utility tools for tailoring and fragmentation of existing product based on client requirements. This includes customizing the look and feel of TIPIus to reflect the bank's brand. TIPlus UpgradeProficient and skill in upgrading TIPlus from a earlier version to new or most recent version. Patch ManagementHands on experience on resolution of defect cases rose for customization, interface developments and batch execution and moving them as patch for next level. Infrastructure setupSetup the infrastructure for development and testing of application components on virtual machines and application server. The scope of infrastructure setup includes installing and managing the product on database servers, application servers and virtual machines for development and testing environment. EnvironmentJava/J2EE, spring 3.0, Eclipse (3.5.0), Oracle, Customization Editor, XLate, Websphere, Migration ETL tools. Business Analysis, - One to Three Years,UAT - One to Three Years,Application Consultant - One to Three Years------PSP Defined SCU in Banking_Business Analyst Skills (competencies) Verbal Communication

C/C++ Programming & Linux Embedded Firmware development - Microcontrollers, Microprocessors. IoT Bare metal (No OS), RTOS Design skills, C, Embedded firmware development, Device Drivers, Serial Programming, Configuration Management, Debugging