419 Metallurgy Jobs - Page 11

Foundry Sales or work in the foundry industry (in Green sand molding Process Dept. preferred Clay mineral sector, Coal Supply experience in the foundry industry. The candidate should have work experience in the Sales of the Foundry division. Required Candidate profile Sales Operations of the minerals in the foundry division.business, including contract preparation, supervision of a small team preparing sales & shipping documents,and controlling.

Geo Design & Research is looking for CHEMISTRY LAB TECHNICIAN to join our dynamic team and embark on a rewarding career journey Conducts lab tests and chemical analyses Prepares samples and maintains lab equipment Documents results and follows safety protocols Supports R&D and quality control teams

Geo Design & Research is looking for MECHANICAL LAB TECHNICIAN to join our dynamic team and embark on a rewarding career journey Assist with testing and calibrating lab equipment in preparation for specific tasksAnalyze retrieved data and prepare reports for laboratory managementExperience in data collection and interpretation as well as the storage and retrieval of samples in a laboratory setting

Geo Design & Research is looking for LAB TECHNICAL MANAGER to join our dynamic team and embark on a rewarding career journey Assist with testing and calibrating lab equipment in preparation for specific tasksAnalyze retrieved data and prepare reports for laboratory managementExperience in data collection and interpretation as well as the storage and retrieval of samples in a laboratory setting

MAIN PURPOSE OF THE JOB Responsible for Supplier development, working with local and overseas suppliers to implement corrective and preventive actions to improve product quality RESPONSIBILITIES Supplier Selection Proactively work with purchasing colleagues in selecting and approving vendors. Evaluate supplier process capability - process/product audit and inspection plans. Evaluate supplier quality management capability - ISO9001. Play an active role in the first piece approval process - work with incoming inspection ensures sample parts are adequately inspected and tested if appropriate and feedback any issues or concerns to the supplier. Supplier Development Work with suppliers to establish control plans and inspection plans for all parts (or families of parts that are similar) Work with suppliers for the development of the right tooling, jigs and fixtures. Work with suppliers to improve their process through supplier collation of data (rejects, scrap etc) and the Rotork supplier scorecard. Drive Global New Quality and Delivery Initiatives 3. Supplier Conformance Work with purchasing department to ensure supplier conformance quality of delivered goods. Work with Manufacturing and inspection personnel to understand the issues and communicate these to suppliers. Ensure Suppliers to have adequate checks in place to ensure compliance with specifications and that records of these checks are kept and are batch traceable (casting melt or heat number and machining batch number). Records include dimensional inspection reports, physical test reports and material test reports. Ensure deviations to specification are communicated by the supplier to Rotork and parts held until written acceptance is issued by Rotork. Ensure that suppliers respond with formal corrective action plans. 4. Supplier Evaluation Plan, organize supplier audits - audit quality management system, verify materials are processed in accordance with control plans and that adequate records are maintained and traceable. Maintain supplier scorecard for all deliveries to all manufacturing sites. Distribute to Rotork management and supplier. Work with supplier to improve. Regular feedback to suppliers on the overall quality performance. 5. Reporting Regular report to management on suppliers quality performance, includes incoming rejection rate, suppliers process yield, quality system maintenance, results of on site audit, etc Communicate with headquarter engineers and suppliers to clarify the materials standards and specifications Personal Qualities Strong sense of continuous improvement and good problem-solving skills Frequently travel to suppliers is needed. Good time management skills with persistent drive for results Self motivated and ability to motivate others, positive attitude, creative team player Strategic thinker with ability to make sound business judgements Education and Experience BE/ B. Tech in Mechanical / Production / Metallurgy Total of 6-8 years experience and at least 3 years in quality function in manufacturing company. Excellent knowledge of operations management and supply chain process. Strong background in ductile and cast-Iron foundries. Must have experience in machining processes including gear cutting and the design/development and approval of tooling, jigs and fixtures. Experience in metallurgical and mechanical testing of materials including cast iron and ductile iron such as hardness testing, tensile testing and microstructure examination. Must have first hand knowledge of ISO9001 requirements for control of documents, internal audits, control of product and processes (manufacturing), production inspection, control of nonconforming product and measuring devices. Strong knowledge of quality concepts such as APQP, PPAP Hands on experience in the use of measuring devices - CMM, Hardness tester etc. Exposure to different global standards such as ASTM, ISO, BS & API Competence in written and spoken communication in English Competence with computerized analytical tools including Microsoft Outlook, Excel and Access Qualification : BE/ B. Tech in Mechanical / Production / Metallurgy Experience: 6-8Yrs

We use cookies to offer you the best possible website experience. Your cookie preferences will be stored in your browser s local storage. This includes cookies necessary for the websites operation. Additionally, you can freely decide and change any time whether you accept cookies or choose to opt out of cookies to improve the websites performance, as well as cookies used to display content tailored to your interests. Your experience of the site and the services we are able to offer may be impacted if you do not accept all cookies. Modify Cookie Preferences Reject All Cookies Accept All Cookies Search by Keyword Search by Location Search by Postal Code Job experience level Select how often (in days) to receive an alert: Select how often (in days) to receive an alert: Manager Sales North Job Location(s): Danfoss Climate Solutions Segment Work Location Type: Job Description Were seeking an Asst. Manager to join our dynamic and growing Sales team for Heat Exchanger in Danfoss Climate Solutions at North region. As the member of the team, you will be responsible for developing and growing the Sales for Heat Exchanger in North region. Engaging within a dynamic cross-functional team. Job Responsibilities Develop and grow sales with for Heat Exchangers in North region. Manage and develop quality opportunity pipeline, Generate business from EPC, consultants end users Direct sales responsibility for Heat Exchanger product portfolio. To develop a business plan to access the heat exchanger market within Power, Chemical, Metallurgy and general industry sectors Follow up all quotations and establish contact with customer base via sales force Maintenance of a high-quality opportunity pipeline Background Skills 5+ Years of experience in Sales or Business development of Capital equipment, Industrial products Bachelor s in engineering with Mechanical / Chemical Possess extensive sales knowledge and experience in the heat exchanger / process equipment Proficiency in Microsoft office, Salesforce are preferred Strong inter-personal skills to work seamlessly with cross-functional teams. Able to multitask in a matrix organizational environment Excellent communication (written verbal) and presentation skills Good interpersonal communication, listening, and influencing skills Must be willing to adapt to and/or learn new processes Danfoss Engineering Tomorrow At Danfoss, we are engineering solutions that allow the world to use resources in smarter ways - driving the sustainable transformation of tomorrow. No transformation has ever been started without a group of passionate, dedicated and empowered people. We believe that innovation and great results are driven by the right mix of people with diverse backgrounds, personalities, skills, and perspectives, reflecting the world in which we do business. To make sure the mix of people works, we strive to create an inclusive work environment where people of all backgrounds are treated equally, respected, and valued for who they are. It is a strong priority within Danfoss to improve the health, working environment and safety of our employees. Following our founder s mindset action speaks louder than words , we set ourselves ambitious targets to protect the environment by embarking on a plan to become CO2 neutral latest by 2030. Danfoss engineers solutions that increase machine productivity, reduce emissions, lower energy consumption, and enable electrification. Our solutions are used in such areas as refrigeration, air conditioning, heating, power conversion, motor control, industrial machinery, automotive, marine, and off- and on-highway equipment. We also provide solutions for renewable energy, such as solar and wind power, as well as district-energy infrastructure for cities. Our innovative engineering dates back to 1933. Danfoss is family-owned, employing more than 39.000 people, serving customers in more than 100 countries through a global footprint of 95 factories. Danfoss engineers solutions that increase machine productivity, reduce emissions, lower energy consumption, and enable electrification. Our solutions are used in such areas as refrigeration, air conditioning, heating, power conversion, motor control, industrial machinery, automotive, marine, and off- and on-highway equipment. We also provide solutions for renewable energy, such as solar and wind power, as well as district-energy infrastructure for cities. Our innovative engineering dates back to 1933. Danfoss is family-owned, employing more than 39.360 people, serving customers in more than 100 countries through a global footprint of 95 factories. When you visit any website, it may store or retrieve information on your browser, mostly in the form of cookies. Because we respect your right to privacy, you can choose not to allow some types of cookies. However, blocking some types of cookies may impact your experience of the site and the services we are able to offer. These cookies are required to use this website and cant be turned off. Provider Description Enabled SAP as service provider We use the following session cookies, which are all required to enable the website to function: "route" is used for session stickiness "careerSiteCompanyId" is used to send the request to the correct data centre "JSESSIONID" is placed on the visitors device during the session so the server can identify the visitor "Load balancer cookie" (actual cookie name may vary) prevents a visitor from bouncing from one instance to another Functional Cookies These cookies provide a better customer experience on this site, such as by remembering your login details, optimising video performance or providing us with information about how our site is used. You may freely choose to accept or decline these cookies at any time. Note that certain functionalities that these third-parties make available may be impacted if you do not accept these cookies. Advertising Cookies These cookies serve ads that are relevant to your interests. You may freely choose to accept or decline these cookies at any time. Note that certain functionality that these third parties make available may be impacted if you do not accept these cookies.

Total Number of Openings 1 About the position: The Materials & Corrosion Engineer is part of the Materials, Equipment, and Quality team within Chevron s ENGINE Center and is responsible for providing metallurgy, corrosion, failure analysis, welding, coatings, non-metallics and cathodic protection consulting services to Chevron Downstream Business Units and Capital Projects, including joint venture refineries and Chevron Lummus Global (CLG)., This role helps to ensure reliability and integrity of piping, equipment, structures, and pipelines across Chevron assets. Key responsibilities: Work collaboratively with SMEs at CTC and within the ENGINE to develop and deploy materials, corrosion, coatings and welding solutions. Make fit-for-purpose materials selections for new and replacement piping and equipment. Predict corrosion rates in upstream production environments using corrosion modeling tools. Review and analyze corrosion monitoring and inhibition data to optimize corrosion control program. Review welding procedures and support qualification of welding procedures. Troubleshoot welding fabrication issues. Make coating systems selections and review coatings application procedures. Support metallurgical failure analysis of piping and equipment. Provide technical input to support damage mechanism identification, corrosion assessments, inspection plans. Required Qualifications: Bachelor of Science degree in Metallurgy, Corrosion, Materials Engineering, or related engineering discipline from a recognized (AICTE) university. Skilled competency level in downstream metallurgy and corrosion, including high temperature damage mechanisms. Skilled competency level in welding, coatings and non-metallics Fundamental knowledge of relevant technical codes and standards (NACE MR0103, API 571, ASME B31.3, B31.4, B31.8, ASME BPV Sec VIII, ASME Sec IX, ASME PCC-2) Fundamental competency level in fixed equipment (piping, equipment, pipelines, heat exchangers, tanks) integrity management. Preferred Qualifications: 10+ years corrosion and materials engineering experience, with 7+ years in the downstream oil and gas industry. Master's degree in Corrosion, Metallurgy or Materials Engineering Hands-on, field experience at a downstream operating facility NACE Specialist/Technologist certification in materials selection or corrosion control. Professional Engineering registration Experience with data analytics and digital tools Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law.

Material Analysis assessments of incoming R/M to verify compliance with quality stds. and specifications Inventory Optimization Collaborate with procurement and prod. teams to manage material stocks efficiently, process Improvement,Technical Support

Ensure daily production as per casting process parameters. Plan & monitor heat treatment cycles and equipment maintenance. Manage shift manpower and coordinate with vendors during breakdowns. Maintain 5S and cleanliness in the department. Required Candidate profile 3+ years of foundry experience in melting/fettling/moulding. Hands-on knowledge of casting processes. Excellent communication and interpersonal skills

Production and Purchase Manager to lead our scrap lead-acid battery recycling operation. The successful candidate will have experience in procuring and processing scrap materials, with a strong understanding of the local market. Required Candidate profile BE With 10+ years of experience in procurement & production management, preferably in the scrap recycling industry. Source & purchase scrap lead-acid batteries

Select with space bar to view the full contents of the job information. Senior Manager- Design- Civil- Renewable Job Details | tatacons02 Search by Keyword Search by Location Custom Field 3 Custom Field 1 Select how often (in days) to receive an alert: Select how often (in days) to receive an alert: Senior Manager- Design- Civil- Renewable Noida, DL, IN, 201301 Purpose Scope of Position To lead and execute the engineering and design of renewable energy projects. The role aims to ensure technically robust, cost-effective, and sustainable design solutions while coordinating with internal teams and external stakeholders throughout the project lifecycle. Experience 10-15 years of experience in Engineering and Design of Solar PV Plant, Wind Farm Design and other areas like floating solar Plant. Design of Wind Turbine Foundation will be an added advantage. Preparation of RFQ, Technical Specification, Bid Clarification and Project co-ordination with various stake holders. Experience in Switchyard Structures, Transmission line and Substation design if available shall be looked into it. Qualification Graduate or Postgraduate in Civil Engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities Support Project Manager (PM) and Engineering Manager (EM) in meeting project requirements scope, cost, schedule, and quality. Prepare Engineering Work Packages (EWPs) and support planning and progress reporting. Lead and participate in multidisciplinary design reviews and project engineering meetings. Prepare, review, and ensure adherence to project procedures, design standards, and specifications. Oversee and review work from junior and intermediate engineers, designers, and drafters. Provide technical leadership and facilitate knowledge-sharing across project teams. Conduct and review conceptual and detailed engineering calculations, design reports, and technical evaluations. Prepare and/or review technical specifications, RFQs, and bid evaluations. Interface with client technical teams and support clarification and negotiation during the bid and execution phases. Ensure implementation of Safety in Design principles throughout the design lifecycle. Coordinate resource planning, forecasting, and workload allocation. Ensure timely and accurate data handover to other engineering disciplines and resolve integration challenges. Drive documentation of value additions, best practices, and key learnings for continuous improvement. Support digital initiatives and automation in design tools or workflows. Maintain compliance with internal and client-specific quality and document control procedures. Mentor, train, and review the performance of project team members. Contribute to project closure documentation and post-project knowledge capture.

Select with space bar to view the full contents of the job information. Senior Manager- Design- Civil Substation Job Details | tatacons02 Select how often (in days) to receive an alert: Select how often (in days) to receive an alert: Senior Manager- Design- Civil Substation Purpose Scope of Position The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities 1. Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule 2. Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager 3. Assist in the compilation and delivery of monthly engineering status reports 4. Participate in and contribute to design reviews 5. Represent the discipline in the project engineering coordination meetings 6. Prepare and/or review project procedures, standard specifications and design criteria 7. Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists 8. Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects 9. Perform conceptual and detailed engineering design 10. Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required 11. Provide and/or coordinate training for resources assigned to the project 12. Work to ensure the implementation of safety in design 13. Ensures measurement of progress on all contracts for reporting and progress claim purposes. 14. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges 15. Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership 16. Support technology team/ Project team for development and automation works as required. 17. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. 18. Manage performance data of reportees and provide periodic feedback. 19. Provides resource loading forecast to TL. 20. Keeps records of learning s during the project and provides inputs to PM during job closure report. 21. Prepare technical specifications/ bid evaluation/ technical recommendation where required 22. Interact with the discipline engineers of customer during entire life cycle of the project and beyond.

Select with space bar to view the full contents of the job information. Senior Manager- Design- Electrical- Renewable Job Details | tatacons02 Select how often (in days) to receive an alert: Select how often (in days) to receive an alert: Senior Manager- Design- Electrical- Renewable Purpose Scope of Position The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities 1. Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule 2. Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager 3. Assist in the compilation and delivery of monthly engineering status reports 4. Participate in and contribute to design reviews 5. Represent the discipline in the project engineering coordination meetings 6. Prepare and/or review project procedures, standard specifications and design criteria 7. Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists 8. Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects 9. Perform conceptual and detailed engineering design 10. Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required 11. Provide and/or coordinate training for resources assigned to the project 12. Work to ensure the implementation of safety in design 13. Ensures measurement of progress on all contracts for reporting and progress claim purposes. 14. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges 15. Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership 16. Support technology team/ Project team for development and automation works as required. 17. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. 18. Manage performance data of reportees and provide periodic feedback. 19. Provides resource loading forecast to TL. 20. Keeps records of learning s during the project and provides inputs to PM during job closure report. 21. Prepare technical specifications/ bid evaluation/ technical recommendation where required 22. Interact with the discipline engineers of customer during entire life cycle of the project and beyond.

Select with space bar to view the full contents of the job information. Design- Electrical- Renewable Job Details | tatacons02 Select how often (in days) to receive an alert: Select how often (in days) to receive an alert: Noida, DL, IN, 201301 Purpose Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required.

Select with space bar to view the full contents of the job information. Planning Engineer-E1-Planning-PMO Job Details | tatacons02 Select how often (in days) to receive an alert: Select how often (in days) to receive an alert: Planning Engineer-E1-Planning-PMO Pune, MH, IN, 411021 Purpose Scope of Position The Planning Engineer is responsible for the delivery of project planning and progress measurement, ensuring that TCE s procedures and best practices are applied, as appropriate, and recommending changes to the Project Controls Manager where required. He is responsible for developing and maintaining the project master schedule to meet the project objectives. Experience Working knowledge of engineering, project control systems and construction management. 2+ years of relevant experience as a planner in a multi discipline project environment Knowledge in the use of Primavera Project Planner and MS Office package Qualification Postgraduate or graduate in an engineering discipline Professional Project Management Certification (preferable from PMI) or Post Graduate degree in Project Engineering and Management or Post Graduate degree in Advanced Construction Management Key Responsibilities 1.Conduct planning meeting with Functional Managers to finalize project implementation schedule 2.Create detailed logic linked project plans around project WBS in primavera or by using various Microsoft tools 3.Monitor plans to ensure that the processes relating project planning to detailed planning are being adhered to 4.Manage and control the project schedule against base line conditions, including staff, production and materials 5.Confirm project schedules and critical paths and set baseline for project implementation phase 6.Generate and verify weekly updates and issue progress reports 7.Participate in project schedule risk analysis and include resultant contingency in baseline 8.Using progress reports (early and late curves) and project schedule. maintain, optimize and monitor progress. Identify and resolve issues 9.Monitor slippages of critical and near critical paths and discuss with Project Controls Engineer/Project Manager for resolution 10.Ensures the integrity of the project schedule through approved scope changes, fiscal changes and contingency reallocations 11.Re-base line the plan(s) following a major contract change, to create a revised, viable programme of work for the remaining tasks 12.Once a change is approved, maintain and optimize the schedule, monitor progress and highlight/ resolve areas of potential concern. 13.Ensures the project cost reports include schedule adjustments that could affect the forecast final costs 14.Analyse, interpret and report on key performance indicators such as earned value, schedule performance indicators, cost performance indicators and forecast cost at completion date 15.Facilitate exchange of information between Project Manager and Project Controls Engineer 16.Communicate cost and schedule risk reports to Project Controls Engineer contributing to recovery and improvement initiatives

The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities 1. Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule 2. Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager 3. Assist in the compilation and delivery of monthly engineering status reports 4. Participate in and contribute to design reviews 5. Represent the discipline in the project engineering coordination meetings 6. Prepare and/or review project procedures, standard specifications and design criteria 7. Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists 8. Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects 9. Perform conceptual and detailed engineering design 10. Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required 11. Provide and/or coordinate training for resources assigned to the project 12. Work to ensure the implementation of safety in design 13. Ensures measurement of progress on all contracts for reporting and progress claim purposes. 14. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges 15. Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership 16. Support technology team/ Project team for development and automation works as required. 17. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. 18. Manage performance data of reportees and provide periodic feedback. 19. Provides resource loading forecast to TL. 20. Keeps records of learning s during the project and provides inputs to PM during job closure report. 21. Prepare technical specifications/ bid evaluation/ technical recommendation where required 22. Interact with the discipline engineers of customer during entire life cycle of the project and beyond. Competencies Drives Results Ensures Accountability Optimizes Work processes Plans and Aligns Decision Quality

Select with space bar to view the full contents of the job information. Project Engineer-E2-Electrical-Design Engineering Job Details | tatacons02 Select how often (in days) to receive an alert: Select how often (in days) to receive an alert: Project Engineer-E2-Electrical-Design Engineering Pune, MH, IN, 411021 Purpose Scope of Position The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities 1. Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule 2. Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager 3. Assist in the compilation and delivery of monthly engineering status reports 4. Participate in and contribute to design reviews 5. Represent the discipline in the project engineering coordination meetings 6. Prepare and/or review project procedures, standard specifications and design criteria 7. Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists 8. Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects 9. Perform conceptual and detailed engineering design 10. Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required 11. Provide and/or coordinate training for resources assigned to the project 12. Work to ensure the implementation of safety in design 13. Ensures measurement of progress on all contracts for reporting and progress claim purposes. 14. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges 15. Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership 16. Support technology team/ Project team for development and automation works as required. 17. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. 18. Manage performance data of reportees and provide periodic feedback. 19. Provides resource loading forecast to TL. 20. Keeps records of learning s during the project and provides inputs to PM during job closure report. 21. Prepare technical specifications/ bid evaluation/ technical recommendation where required 22. Interact with the discipline engineers of customer during entire life cycle of the project and beyond.

Select with space bar to view the full contents of the job information. Project Engineer-E3-Electrical-Design Engineering Job Details | tatacons02 Select how often (in days) to receive an alert: Select how often (in days) to receive an alert: Project Engineer-E3-Electrical-Design Engineering Kolkata, WB, IN, 700106 Purpose Scope of Position The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities 1. Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule 2. Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager 3. Assist in the compilation and delivery of monthly engineering status reports 4. Participate in and contribute to design reviews 5. Represent the discipline in the project engineering coordination meetings 6. Prepare and/or review project procedures, standard specifications and design criteria 7. Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists 8. Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects 9. Perform conceptual and detailed engineering design 10. Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required 11. Provide and/or coordinate training for resources assigned to the project 12. Work to ensure the implementation of safety in design 13. Ensures measurement of progress on all contracts for reporting and progress claim purposes. 14. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges 15. Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership 16. Support technology team/ Project team for development and automation works as required. 17. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. 18. Manage performance data of reportees and provide periodic feedback. 19. Provides resource loading forecast to TL. 20. Keeps records of learning s during the project and provides inputs to PM during job closure report. 21. Prepare technical specifications/ bid evaluation/ technical recommendation where required 22. Interact with the discipline engineers of customer during entire life cycle of the project and beyond.

Select with space bar to view the full contents of the job information. Project Engineer-E3-Structures-Design Engineering Job Details | tatacons02 Select how often (in days) to receive an alert: Select how often (in days) to receive an alert: Project Engineer-E3-Structures-Design Engineering Pune, MH, IN, 411021 Purpose Scope of Position The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities 1. Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule 2. Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager 3. Assist in the compilation and delivery of monthly engineering status reports 4. Participate in and contribute to design reviews 5. Represent the discipline in the project engineering coordination meetings 6. Prepare and/or review project procedures, standard specifications and design criteria 7. Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists 8. Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects 9. Perform conceptual and detailed engineering design 10. Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc.) where required 11. Provide and/or coordinate training for resources assigned to the project 12. Work to ensure the implementation of safety in design 13. Ensures measurement of progress on all contracts for reporting and progress claim purposes. 14. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges 15. Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership 16. Support technology team/ Project team for development and automation works as required. 17. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. 18. Manage performance data of reportees and provide periodic feedback. 19. Provides resource loading forecast to TL. 20. Keeps records of learning s during the project and provides inputs to PM during job closure report. 21. Prepare technical specifications/ bid evaluation/ technical recommendation where required 22. Interact with the discipline engineers of customer during entire life cycle of the project and beyond.

Analyze material performance,failure in metals and alloys under various operating conditions. Develop and improve metal production and processing techniques Select materials for product designs based on mechanical, thermal, and chemical properties.

The Group You ll Be A Part Of As a leading global supplier of wafer fabrication equipment and services to the semiconductor industry, Lam Research develops innovative solutions that help our customers build smaller, faster, and more power-efficient devices. We are a company comprised of people who work hard, deliver outstanding results, and maintain a sense of humor during even the most challenging times. Our success results from our employees diverse technical and business expertise, which fuels close collaboration and ongoing innovation. We know that our dynamic, global team of exceptional employees is essential to our continued growth. Join the Lam Research team, where you can play a vital role in the future of electronics and write your own success story. The Impact You ll Make As a Supplier Quality Assurance (QA) Engineer at Lam, youll make an impact in ensuring suppliers manufacturing processes and products meet quality standards by designing, implementing, and maintaining quality assurance programs. You design methods for inspecting, testing, and evaluating production processes and finished products onsite at our global suppliers locations. By analyzing production data, you identify trends and partner with the supplier to resolve technical, quality and production challenges. Your expertise will help develop excellence in supplier product inputs supporting Lams commitment to delivering high-quality and reliable products. What You ll Do This position will be based out of Bangalore, directly reporting into the leader of Supplier Quality Manager in India and with Global Supplier Quality organization. This individual would be responsible to manage Sheet Metal Fabrication & Surface Coating supplier engineering activities by working closely with suppliers, Engineering and supply chain teams in US and Asia region. Primary job responsibilities of the role are listed below: Provide expertise in manufacturing processes for Sheet Metals and Frames (Welding of Stainless Steel, Cold rolled steel and Aluminum, painting, etc) Work with suppliers to develop process of records (POR) & interface with design engineering to understand performance requirements. Collaborate with engineering, product management & supply chain teams to capture their requirements and provide Design-for-Manufacturing inputs on fabricated parts Discover and review new fabrication technologies and new materials for application to Lam products to enable new capabilities, reduce variation in manufacturing, or improve product performance. Drive improvement of the supplier s quality, 8D & POR to ensure product quality, cost, and on-time-delivery. Continuously focus on process improvement and Best-Known Methods development Travel to Lam and Lam supplier s manufacturing locations to conduct audit and document supplier s performance on critical POR & overall quality management systems. Apply findings to implement systematic and lasting improvements to product and processes Collaborate with cross functional and global teams to execute strategies and clearly communicate with stakeholders on strategy implementation. Who We re Looking For Educational qualification: Bachelor s/Master s engineering degree in Mech/Prod/Industrial/Aerospace Years of Experience: Bachelor s degree with minimum 8 years (or) Masters with minimum 6 years of relevant experience Mandatory Skills: Strong understanding of GD&T, metallurgy, powder coating and welding techniques Working knowledge on various types of metal welding process. Strong in understanding & interpretation of Sheet Metal & Frames assembly drawing. Strong ability to read mechanical drawings, specification & interpretation of BOM. Working knowledge of Statistical Process Control (SPC), Gauge Repeatability & Reproducibility (GR&R, MSA), 5-Why, 6S/7W, t/F tests, box plots, 8D, Ishikawa diagrams Experience in Project Management, team lead experience, supplier process development, quality & project management Experience in Supplier Process development, Quality management & handling suppliers from remote location Proficient in Structured Problem-solving tools (8D Problem solving, 5 Why, Fishbone Diagram, FMEA, DOE etc.). Excellent communication and presentation skill Preferred Skills Working knowledge of ASM welding standards, (Semi S2, OSHA, RoHS, ISO 9001/ IATF 16949 & ISO 13485:2016) Knowledge on measuring Instruments like Vernier caliper, Micrometer, Profile projector etc. & welding tools Experience in handling suppliers from remote location and maintaining a strong working relationship. Experience in any ERP tool (ex. SAP, Oracle) & statistical tools (JMP, Minitab etc.) Strong analytical skills to convert data into information and craft executive level summaries Our Commitment We believe it is important for every person to feel valued, included, and empowered to achieve their full potential. By bringing unique individuals and viewpoints together, we achieve extraordinary results. Lam Research ("Lam" or the "Company") is an equal opportunity employer. Lam is committed to and reaffirms support of equal opportunity in employment and non-discrimination in employment policies, practices and procedures on the basis of race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex (including pregnancy, childbirth and related medical conditions), gender, gender identity, gender expression, age, sexual orientation, or military and veteran status or any other category protected by applicable federal, state, or local laws. It is the Companys intention to comply with all applicable laws and regulations. Company policy prohibits unlawful discrimination against applicants or employees. Lam offers a variety of work location models based on the needs of each role. Our hybrid roles combine the benefits of on-site collaboration with colleagues and the flexibility to work remotely and fall into two categories - On-site Flex and Virtual Flex. On-site Flex you ll work 3+ days per week on-site at a Lam or customer/supplier location, with the opportunity to work remotely for the balance of the week. Virtual Flex you ll work 1-2 days per week on-site at a Lam or customer/supplier location, and remotely the rest of the time.

Our reputed MNC Client is hiring for Metallurgy Engineer: Location: Chakan, Pune Shift: 1st, 2nd, 3rd Notice Period: 0-30 days (Plz don't apply if your notice period is more than 30 days) NOTE: 1 year Contract/ 3rd party payroll (Extendable on good performance) Job purpose Responsible for Metallurgical Lab activities in day-to-day inward material inspection, Reports preparations, NC Handling, Equipment monitoring. Duties and responsibilities Should handle Metallurgy Lab activity, incoming inspection. Should have knowledge of Hardness Testing like Rockwell, Brinell, Vickers etc. UTM Machine Testing Microscope, Stereoscope Handling Should have knowledge of various types of Heat Treatment Sample preparation for microscopic analysis Chemical Testing by Spectrometer Welding Penetration inspection MS office, ERP, Navision system IATF awareness 5S maintaining. Qualifications & specific requirement: Education : Diploma in Metallurgical Engineering Skills : Quality Lab Handling Warm Regards, Gayatri Kumari Email Id: gayatri@v3staffing.in V3 Staffing Solutions

The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager Assist in the compilation and delivery of monthly engineering status reports Participate in and contribute to design reviews Represent the discipline in the project engineering coordination meetings Prepare and/or review project procedures, standard specifications and design criteria Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects Perform conceptual and detailed engineering design Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc) where required Provide and/or coordinate training for resources assigned to the project Work to ensure the implementation of safety in design Ensures measurement of progress on all contracts for reporting and progress claim purposes. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership Support technology team/ Project team for development and automation works as required. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. Manage performance data of reportees and provide periodic feedback. Provides resource loading forecast to TL. Keeps records of learning s during the project and provides inputs to PM during job closure report. Prepare technical specifications/ bid evaluation/ technical recommendation where required Interact with the discipline engineers of customer during entire life cycle of the project and beyond.

The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager Assist in the compilation and delivery of monthly engineering status reports Participate in and contribute to design reviews Represent the discipline in the project engineering coordination meetings Prepare and/or review project procedures, standard specifications and design criteria Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects Perform conceptual and detailed engineering design Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc) where required Provide and/or coordinate training for resources assigned to the project Work to ensure the implementation of safety in design Ensures measurement of progress on all contracts for reporting and progress claim purposes. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership Support technology team/ Project team for development and automation works as required. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. Manage performance data of reportees and provide periodic feedback. Provides resource loading forecast to TL. Keeps records of learning s during the project and provides inputs to PM during job closure report. Prepare technical specifications/ bid evaluation/ technical recommendation where required Interact with the discipline engineers of customer during entire life cycle of the project and beyond.

The Project Engineer (PE) will be part of an engineering stream providing engineering services to large and small projects. The PE provides support to the Project Manager (PM) and Engineering Manager (EM) and is responsible for supervising a team of working engineer and designers. The PE provides leadership and assists in the resolution of all technical issues related to the discipline. Experience 10+ years of experience in relevant design discipline Experience in engineering and package coordination Qualification Postgraduate or graduate in an engineering discipline Registration as a professional engineer with the governing authority (preferable) Key Responsibilities Assist the PM and EM with the delivery of project requirements as they relate to scope, quantities, cost and schedule Prepare Engineering Work Packages (EWPs) in consultation with the Engineering Manager Assist in the compilation and delivery of monthly engineering status reports Participate in and contribute to design reviews Represent the discipline in the project engineering coordination meetings Prepare and/or review project procedures, standard specifications and design criteria Review and evaluate technical work prepared by junior engineers, intermediate engineers, designers, technicians and technologists Ensure relevant technical experts are involved in the design process as required and facilitate the sharing of technical expertise across projects Perform conceptual and detailed engineering design Prepare engineering work (calculations, reports, specifications, evaluations, recommendations etc) where required Provide and/or coordinate training for resources assigned to the project Work to ensure the implementation of safety in design Ensures measurement of progress on all contracts for reporting and progress claim purposes. Responsible to ensure timely availability of discipline data to other disciplines, and work with fellow PEs and EM on integration of the same and resolution of any issues and challenges Document value additions and best practices and ensure communication of the same to fellow project engineers of other projects and discipline leadership Support technology team/ Project team for development and automation works as required. Ensure compliance to all quality and document management processes within TCE and as agreed with customer. Manage performance data of reportees and provide periodic feedback. Provides resource loading forecast to TL. Keeps records of learning s during the project and provides inputs to PM during job closure report. Prepare technical specifications/ bid evaluation/ technical recommendation where required Interact with the discipline engineers of customer during entire life cycle of the project and beyond.