108 Meshing Jobs - Page 2

Role description CFD Engineer / Tech Lead-CFD Scope of Role CFD meshing, geometry cleanup & simulation for automotive Domain. He/she need good in CFD meshing by using ANSA & Hypermesh tool. Also Good to do the case setup and simulation as per provided guidelines. Very Good understanding in CFD Fundamental. Hands on Experience CFD simulation by this tool ANSYS-FLUENT, Altair nanofluidX any of the pre-processing tool’s ANSA, Hypermesh Area of Responsibility: This position is responsible for carrying out CFD meshing and simulation for below domain Perform CFD projects/ Mesh and geometry modification Experience at Vehicle under-hood thermal simulation Experience on External aerodynamic simulation Experience on Water Wading and dirt simulation Experience on Battery thermal Simulation Experience on HVAC of automotive domain (Demist/ defrost) Experience on Aero noise for HAVC & external aero simulation Knowledge / Experience: 2-8 yrs experience in CFD preferably in automotive application

To support the simulation team at the customer location in analyzing their products with Ansys Maxwell/Motor-CAD. Duties: Perform 2D & 3D FE analysis of electrical and electronic devices and components. Providing online/offline training to customers on the Ansys tool, Maxwell, and Motor-CAD. Well-versed with 2D/3D Maxwell Pre/Solver/Postprocessors. Must be skilled in the following types of tools/simulations: RM xprt Maxwell 2D and 3D Maxwell Circuit Motor CAD BLDC motors Induction motor (single-phase and three-phase) Design optimization Perform the following with a focus on quality and delivery metrics: Finite Element Preprocessing (Geometry clean-up/de-featuring & meshing), Solving (Convergence, numerical stability, and accuracy). Post Processing (motor performance plot). Verification and Validation of Maxwell Results with test data/analytical data. Generation of FE Analysis Reports. Interact with customer teams for inputs and deliverables. Preparation of analysis summary for technical review meetings with the clients. Provide valuable recommendations and design suggestions to clients. Skills: Proven experience in Electromagnetic analysis with Ansys Maxwell. Demonstrated problem-solving skills with a passion for learning and teaching. Excellent understanding of Finite Element Analysis, Electrical machines, and Machine design. Self-starter with excellent verbal, communication, and interpersonal skills. Demonstrated ability in Maxwell simulation and clear presentation of simulation results. Strong ability to handle multiple projects. Keywords: RMxprt, Ansys Maxwell, Ansys Motor CAD. Motor simulation.

Role: Develop & implement automation solutions, drive digital transformation in CAE division Responsibilities: - Automate CAE workflow - Meshing, boundary condition set-up, Post-processing & Report making - Digitalization initiatives (e.g. live CAE dashboard) - Leverage AI & ML for predictive simulations and CAE / design optimization - Data Management and Analysis - Collaborate with the testing team to validate automated workflow against physical results Technical/ Functional: • Strong understanding of CAE tools and simulation processes in the automotive domain • Experience in AI / ML applications in CAE. • Proficiency in programming / scripting (Python, MATLAB, JavaScript, SQL etc) • Experience in data visualization tools (e.g. Power BI) and data management platforms • Familiarity with PLM systems (e.g. Teamcenter) and cloud-based simulation platforms Behavioral: Good analytical ability, Communication & presentation skills, Problem solving skills, Achievement oriented, Active Team player, Networking skills.

Role & responsibilities Perform linear, non-linear, thermal, modal, fatigue simulations using Simcenter 3D & NX Nastran Analyze axle boxes, braking systems , and other critical locomotive subsystems Create high-quality meshes (shells, solids, contacts) and run performance-efficient models Work closely with design teams using Siemens NX / CATIA Document and present simulation findings with actionable design feedback Preferred candidate profile 5 - 9 years hands-on experience in FEA using Simcenter 3D Strong knowledge of structural mechanics, fatigue, thermal-structural coupling Experience in rail/locomotive or heavy machinery domain Proficient in meshing, load applications, boundary conditions, post-processing Excellent written communication and reporting skills

About the Team: We are looking for a new colleague as Technical Lead in the Active Safety Department at our location in Hyderabad . What you can look forward to as Technical Lead: Collaboration within a global CAE team operating at different regions internationally. Product development support using CAE simulations. Perform calculations and simulations on brake components. Dynamic analyses for NVH related to performance. Support new and further development of simulation methodology. Develop correlation models for NVH, Test Simulations. Verify the stress results with hand calculations and prepare standard stress reports. Your Profile as Technical Lead: Graduate or post graduate degree in mechanical engineering or similar field related to structural mechanics. Advanced knowledge in at least one of the following topics: structural mechanics, structural dynamics, vibrations. 6 to 8 years of experience in CAE static and dynamic simulations with advanced knowledge in ANSYS (workbench & spaceclaim; Knowledge of APDL scripts preferable) Experience of meshing and post processing using HyperMesh / HyperWorks is an advantage. Programming skills in one or more of the following fields beneficial: Python, VBA, ANSYS-APDL&ACT. Advanced skills in MS office (Excel).Analytical and structured working behavior. Knowledge of written and oral English (fluent).Experience with brake systems is an added advantage.

Summary / Role Purpose The R&D DevOps Engineer II will support the designing, implementing, and maintaining all phases of software build management and supporting systems for the Meshing Development Unit. This role will closely work with distributed cross functional teams developing next generation engineering software products and create & maintain build scripts, integrate open-source and third-party tools. The DevOps Engineer II uses automation to minimize manual intervention and enhance system stability and reliability. In this role, the DevOps Engineer II will use advanced technical and problem-solving skills to help the team tackle complex issues, satisfy customer requirements, and accomplish development objectives. Key Duties And Responsibilities Perform DevOps activities, including the maintenance, monitoring, documenting, and testing of product builds and packaging to provide quality production builds Configure and maintain tools for generating, deploying and monitoring ANSYS product builds on Windows and Linux platforms within Cloud and On-Premises hardware infrastructure Develop, implement, and maintain fully automated build chains using Continuous Integration and Continuous Delivery (CI/CD) tools Be an expert in investigating, debugging, and resolving platform-specific build failures and issues in development, testing and production environment to maintain high system reliability Collaborate with members of the software development, infrastructure and testing teams to brainstorm best techniques to reduce and resolve complex technological infrastructure, build or packaging problems Measure and monitor metrics and alarms extensively to ensure the performance and reliability of systems. Execute acceptance tests to ensure product build stability and conformance to company quality standards Minimum Qualifications Bachelor’s degree in Computer Science, Computer Engineering, or related field 3 to 5 Yrs of work experience in DevOps Experience with building C/C++ programs on Linux or Windows operating systems Experience with build systems including CMake and SCons Experience with build project configuration and dependency management Experience with programming languages such as C/C++, C#, Fortran, Java Experience with IDEs such as Microsoft Visual Studio and compiler suites such as Intel and GNU Experience with scripting languages such as Python, JavaScript, Windows batch and Linux shell scripts Experience with source code version control systems such as Git Experience with Azure DevOps for managing source code repositories, CI/CD pipelines and agents Experience with pipeline configuration languages like YAML Passion for crafting robust and efficient automated build systems with exceptional debugging and troubleshooting skills Extremely strong in written and interpersonal communication skills Preferred Qualifications And Skills Master’s degree in Computer Science, Computer Engineering or related field Experience working with open-source software, software development tools, compilers, and packaging software Experience working with GitHub Experience with dependency management software such as Conan and NuGet Experience with virtualization and cloud technology such as Docker and container orchestration tools like Kubernetes Knowledge of cloud security

Looking for challenging role? If you really want to make a difference - make it with us Can we energize society and fight climate change at the same time? At Siemens Energy, we can. Our technology is key, but our people make the difference. Brilliant minds innovate. They connect, create, and keep us on track towards changing the world’s energy systems. Their spirit fuels our mission. Our culture is defined by caring, agile, respectful, and accountable individuals. We value excellence of any kind. Sounds like you? Job Description (Role & Responsibility): Carry out preliminary and detailed aerodynamic design activity using 1D, 2D design and analysis tools, and using both steady-state and unsteady CFD simulation. Further develop our aero’ design and optimization toolkit, using coding and Machine Learning. Additional Responsibilities (as plus): Help define engine and rig compressor test programmes in support of new product development projects. Carry-out pre and post engine test analyses. Use analysis tools and test data to predict Compressor Blade aero-mechanical vibration behaviour. Provide support to fault finding and root cause investigation activity. Qualification & Experience required: Postgraduate in Mechanical / Aerospace Engineering with specialization in Aerodynamics, CFD or a related technical discipline. Experience within power, propulsion or aerospace engineering would be preferable. Knowledge of axial compressor design principles and operation. Some experience in use of CFD tools to carry out meshing and solving. Experience in use of Coding eg. Python, Git or other.

Looking for challenging role? If you really want to make a difference - make it with us Can we energize society and fight climate change at the same time? At Siemens Energy, we can. Our technology is key, but our people make the difference. Brilliant minds innovate. They connect, create, and keep us on track towards changing the world’s energy systems. Their spirit fuels our mission. Our culture is defined by caring, agile, respectful, and accountable individuals. We value excellence of any kind. Sounds like you? Job Description (Role & Responsibility): Carry out preliminary and detailed aerodynamic design activity using 1D, 2D design and analysis tools, and using both steady-state and unsteady CFD simulation. Further develop our aero’ design and optimization toolkit, using coding and Machine Learning. Additional Responsibilities (as plus): Help define engine and rig compressor test programmes in support of new product development projects. Carry-out pre and post engine test analyses. Use analysis tools and test data to predict Compressor Blade aero-mechanical vibration behaviour. Provide support to fault finding and root cause investigation activity. Qualification & Experience required: Postgraduate in Mechanical / Aerospace Engineering with specialization in Aerodynamics, CFD or a related technical discipline. Experience within power, propulsion or aerospace engineering would be preferable. Knowledge of axial compressor design principles and operation. Some experience in use of CFD tools to carry out meshing and solving. Experience in use of Coding eg. Python, Git or other.

: Job TitleSenior Engineer LocationPune, India Corporate TitleAVP Role Description Investment Banking is technology centric businesses, with an increasing move to real-time processing, an increasing appetite from customers for integrated systems and access to supporting data. This means that technology is more important than ever for business. The IB CARE Platform aims to increase the productivity of both Google Cloud and on-prem application development by providing a frictionless build and deployment platform that offers service and data reusability. The platform provides the chassis and standard components of an application ensuring reliability, usability and safety and gives on-demand access to services needed to build, host and manage applications on the cloud/on-prem. In addition to technology services the platform aims to have compliance baked in, enforcing controls/security reducing application team involvement in SDLC and ORR controls enabling teams to focus more on application development and release to production faster. We are looking for a platform engineer to join a global team working across all aspects of the platform from GCP/on-prem infrastructure and application deployment through to the development of CARE based services. Deutsche Bank is one of the few banks with the scale and network to compete aggressively in this space, and the breadth of investment in this area is unmatched by our peers. Joining the team is a unique opportunity to help build a platform to support some of our most mission critical processing systems. What well offer you 100% reimbursement under childcare assistance benefit (gender neutral) Sponsorship for Industry relevant certifications and education Accident and Term life Insurance Your Key Responsibilities As a CARE platform engineer you will be working across the board on activities to build/support the platform and liaising with tenants. To be successful in this role the below are key responsibility areas: Responsible for managing and monitoring cloud computing systems and providing technical support to ensure the systems efficiency and security Work with platform leads and platform engineers at technical level. Liaise with tenants regarding onboarding and providing platform expertise. Contribute to the platform offering as part of Sprint deliverables. Support the production platform as part of the wider team. Your skills and experience Understanding of GCP and services such as GKE, IAM, identity services and Cloud SQL. Kubernetes/Service Mesh configuration. Experience in IaaS tooling such as Terraform. Proficient in SDLC / DevOps best practices. Github experience including Git workflow. Exposure to modern deployment tooling, such as ArgoCD, desirable. Programming experience (such as Java/Python) desirable. A strong team player comfortable in a cross-cultural and diverse operating environment Result oriented and ability to deliver under tight timelines. Ability to successfully resolve conflicts in a globally matrix driven organization. Excellent communication and collaboration skills Must be comfortable with navigating ambiguity to extract meaningful risk insights. How well support you About us and our teams Please visit our company website for further information: https://www.db.com/company/company.htm We strive for a culture in which we are empowered to excel together every day. This includes acting responsibly, thinking commercially, taking initiative and working collaboratively. Together we share and celebrate the successes of our people. Together we are Deutsche Bank Group. We welcome applications from all people and promote a positive, fair and inclusive work environment.

🔧 Job Opening: Simulation Engineer – ANSYS Maxwell (Freelance / Contract) 📍 Location: Remote (UAE Preferred) 💼 Company: Recharga Chargine Private Limited 💰 Compensation: AED 1000 (Fixed, Non-Negotiable) 🔍 About Us Recharga Chargine is an innovation-driven energy hardware startup developing a first-of-its-kind multi-rotor, multi-stator generator with a hybrid axial–radial flux (RADAX) architecture. Our technology is aimed at unlocking compact, high-efficiency power solutions for wind, hydro, and industrial energy systems. We are now looking to work with an experienced Simulation Engineer who can assist us in simulating and validating our 3D CAD model using ANSYS Maxwell (Student or Commercial version). 🎯 Key Responsibilities Import, configure, and clean the RADAX generator model geometry in ANSYS Maxwell. Assign accurate electromagnetic materials and properties to components including: Permanent magnets (NdFeB) Copper windings Laminated steel cores Set up appropriate Eddy Current Simulation and solve for: Magnetic flux distribution Output voltage and induced EMF Core losses (hysteresis, eddy) Cogging torque (if possible) Generate clear reports and visuals of simulation outputs. Suggest design optimizations or corrections if needed. ✅ Requirements Proven experience with ANSYS Maxwell 3D/2D, especially for permanent magnet generator simulations. Proficiency in electromagnetic theory, especially axial and radial flux machines. Ability to interpret CAD files from tools like Fusion 360, SolidWorks, or STEP/IGES formats. Ability to troubleshoot model scaling, material assignment, and meshing issues. Good communication skills for remote coordination. 📌 Deliverables Complete Maxwell simulation file (.aedt) Result reports (PDF/HTML with flux maps, loss analysis, voltage curves) Screenshots or animations of simulation behavior Notes on any assumptions, limitations, or potential improvements 💡 Bonus (Not Required) Prior work on dual flux (axial + radial) generator topologies Understanding of energy conversion systems in wind/hydro setups

Location: Pune, Maharashtra Function: R&D | Department: Shared Services Reports to: AGM Are you passionate about mechanical simulation, EMI/EMC validation, and driving innovation in design? We're looking for a Manager (D3) to join our R&D team at Yazaki India. What You'll Do: Lead mechanical simulation for wiring harnesses, cables, and plastic components. Develop meshing techniques & automation scripts (Altair, Ansys). Collaborate with CAE specialists for structural analysis and design improvement. Train and mentor team members on FE Modelling & simulation techniques. Manage projects as an independent contributor and team leader. Interact with global customers and support their requirements. Key Skills: Expertise in CAE tools: ANSYS (Workbench, APDL), Hyperworks (Hypermesh, Hyperview), Maxwell, HFSS, EMI Plus. Strong engineering fundamentals in FEM, structural, thermal & vibration analysis. Leadership & team management capabilities. Excellent communication and customer engagement skills. Qualifications: B.E./B.Tech in Mechanical or Automobile Engineering (M.E./M.Tech preferred). Solid experience in Finite Element Analysis and mechanical design validation. Knowledge of LS-Dyna is a plus. Why Join Us? Work on cutting-edge automotive R&D projects. Opportunity to travel globally for short and long durations. Be part of a collaborative and innovative engineering team.

Become our next FutureStarter Are you ready to make an impact? ZF is looking for talented individuals to join our team. As a FutureStarter, you’ll have the opportunity to shape the future of mobility. Join us and be part of something extraordinary! Technical Lead Country/Region: IN Location: Hyderabad, TG, IN, 500032 Req ID 75720 | Hyderabad, India, ZF India Pvt. Ltd. CAE Simulation-Technical Lead About the Team: We are looking for a new colleague as Technical Lead in the Active Safety Department at our location in Hyderabad . What you can look forward to as Technical Lead: Collaboration within a global CAE team operating at different regions internationally. Product development support using CAE simulations. Perform calculations and simulations on brake components. Dynamic analyses for NVH related to performance. Support new and further development of simulation methodology. Develop correlation models for NVH, Test Simulations. Verify the stress results with hand calculations and prepare standard stress reports. Your Profile as Technical Lead: Graduate or post graduate degree in mechanical engineering or similar field related to structural mechanics. Advanced knowledge in at least one of the following topics: structural mechanics, structural dynamics, vibrations. 6 to 8 years of experience in CAE static and dynamic simulations with advanced knowledge in ANSYS (workbench & spaceclaim; Knowledge of APDL scripts preferable) Experience of meshing and post processing using HyperMesh / HyperWorks is an advantage. Programming skills in one or more of the following fields beneficial: Python, VBA, ANSYS-APDL&ACT. Advanced skills in MS office (Excel). Analytical and structured working behavior. Knowledge of written and oral English (fluent).Experience with brake systems is an added advantage. Why should you choose ZF Group in India? Innovation and Technology Leadership: ZF is at the forefront of technological advancements, offering a dynamic and innovative work environment that encourages creativity and growth Diverse and Inclusive Culture: ZF fosters a diverse and inclusive workplace where all employees are valued and respected, promoting a culture of collaboration and mutual support Career Development: ZF is committed to the professional growth of its employees, offering extensive training programs, career development opportunities, and a clear path for advancement. Global Presence : As a part of a global leader in driveline and chassis technology, ZF provides opportunities to work on international projects and collaborate with teams worldwide. Sustainability Focus: ZF is dedicated to sustainability and environmental responsibility, actively working towards creating eco-friendly solutions and reducing its carbon footprint. Employee Well-being: ZF prioritizes the well-being of its employees, providing comprehensive health and wellness programs, flexible work arrangements, and a supportive work-life balance. Be part of our ZF team as Technical Lead and apply now! Contact Trinath Namadi What does DEI (Diversity, Equity, Inclusion) mean for ZF as a company? At ZF, we continuously strive to build and maintain a culture where inclusiveness is lived and diversity is valued. We actively seek ways to remove barriers so that all our employees can rise to their full potential. We aim to embed this vision in our legacy through how we operate and build our products as we shape the future of mobility. Find out how we work at ZF: Job Segment: R&D Engineer, R&D, Mechanical Engineer, Product Development, Engineering, Research

Key Responsibilities: Perform high-quality mesh generation for structural analysis using Hypermesh and Patran. Develop and refine GFEM and DFEM models for various components and assemblies, ensuring mesh quality and compliance with CAE standards. Prepare models for static, dynamic, and thermal FEA simulations. Interpret and apply engineering drawings and CAD data to build accurate finite element models. Ensure mesh quality and convergence to meet analysis requirements. Ensure adherence to customer-specific FEM guidelines and industry best practices. Collaborate closely with design, simulation, and test teams to validate and iterate FE models. Document meshing processes, model assumptions, and preprocessing methodologies. Troubleshoot and resolve issues related to meshing and model setup. Familiarity with optimization techniques for FE modeling. Required Skills & Qualifications: Bachelor's or Master's degree in Mechanical, Aerospace, or related engineering field. 3 to 7 years of relevant CAE experience, with a focus on meshing and preprocessing. Strong command of Hypermesh and Patran for shell and solid meshing. Hands-on experience in GFEM and DFEM meshing techniques and standards. Solid understanding of FEA fundamentals, material properties, and boundary conditions. Familiarity with CAD software (e.g., CATIA, NX) for model extraction and cleanup. Excellent problem-solving and communication skills. Ability to manage multiple tasks and meet tight deadlines. Proactive attitude towards continuous improvement and learning. Preferred: Exposure to solver environments like OPTISTRUCT, NASTRAN, ABAQUS for FE model set-up Experience with scripting or automation (e.g., TCL, Python) in preprocessing. Knowledge of aerospace or automotive domain-specific CAE workflows.

Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title CFD Engineer/Sr. CFD Engineer Location Bangalore About Us Ingersoll Rand is a global provider of mission-critical flow creation, life science and industrial solutions. Ingersoll Rand’s Global Engineering & Technology Center (GEC) in Bangalore, A GREAT PLACE TO WORK CERTIFIED WORKPLACE is driven by an ownership mindset and entrepreneurial spirit, has been a beacon of innovation for over 19 years, embodying our purpose to “Make Life Better” for our employees, customers, shareholders and the planet. The Engineering & Technology center has expertly supported a diverse range of industrial products, offering deep expertise in core and digital engineering space. By cultivating a sense of inclusion, belonging and respect, and a collaborative culture, the GEC has fostered the most talented and capable engineers, thereby playing a pivotal role in driving Ingersoll Rand’s purpose and strategic focus areas. Job & Division Summary We are looking for a CFD engineer to support different fluid flow simulation requirements of EMEIA global business lines. It involves different product lines such as Compressors, Blowers, Pumps, Dryers etc. and sub system packages using ANSYS CFX & Fluent to support EMEIA i2V, NPD, VAVE and engineering excellence. The candidate should have 5-10 years of Hands-on experience in CFD simulation with solid knowledge of steady/unsteady fluid flow analysis, Heat transfer, CHT, Spray & particle modelling, Multi Phase Flow, Fluid Acoustic simulation etc. This resulted in timely delivery of CFD analysis results and recommendations in technical reports for industrial projects. Responsibilities Developing Fluid CAD model for CFD analysis (ANSYS Design Modeler, ANSYS Space Claim) Generate Mesh (2D/3D, Hexa/Tetra) for Analysis using ANSYS Meshing, ICEM CFD, Fluent Meshing and dynamic meshing Perform the accurate CFD analysis for various Engineering problems (Steady/Transient, Internal/External flow, Multiphase flow, Heat transfer, CHT, Spray & Particle modelling, fluid acoustics simulation, Reacting flows (Combustion, Gasification) etc. Conduct CFD performance analysis of Dry screw pump, Recipe Compressor, Screw & lobe blower and its subsystems including separation tank, filters, valves, coolers, pipes, fan etc. using ANSYS CFX, Fluent and Forte. Responsible for performing pre-processing, solution and post-processing on local & high-performance cluster system. Study the CFD results and explain the physics behind the specific flow patterns Draft CFD reports summarizing project objectives, approach, findings, conclusions and recommendations for design changes. Resolve technical issues tracked after running the simulation, coordinating with the software technical support team to understand the advancements in new versions of the software. Mandatory Skills 3+ Years of Experience in CFD analysis – Steady & Transient fluid flow, CHT, Multi phase flow 3+ Year of experience in rotating machinery performance simulation (PD Machines) 2+ Year experience with Aero acoustic, Dynamic Mesh modelling and spray modelling. 4+ years of experience with Rotating Machinery equipment’s, Thermal Management and silencer and muffler design to control machine noise. 6+ years of experience with strong fundamentals on Thermodynamics, fluid dynamics, Multiphase flow & sound acoustics. 3+ years of hands-on experience with ANSYS software tools; ANSYS CFX, Fluent and Forte. Desired Skills Relevant experience in the turbomachinery or similar industries Ability to work independently and as a team player. Strong written and verbal communication and presentation skills. Strong organizational skills and the ability to handle multiple tasks/multiple projects simultaneously. Project management & Programming skills is an added advantage. Basic Qualifications And Experience Master’s degree in Mechanical Engineering/ Aeronautical/Thermodynamics or similar field 5-10 years of Hand-on experience in CFD simulation using ANSYS CFX & Fluent, ANSYS Mesher & ICEM CFD What We Offer We are all owners of the company! Stock options (Employee Ownership Program) that align your interests with the company's success. Yearly performance-based bonus, rewarding your hard work and dedication. Leave Encashments Maternity/Paternity Leaves Employee Health covered under Medical, Group Term Life & Accident Insurance Employee Assistance Program Employee development with LinkedIn Learning Employee recognition via Awardco Collaborative, multicultural work environment with a team of dedicated professionals, fostering innovation and teamwork. Contact for Queries Karthic Chandran( Talent Acquisition Specialist) Karthic.Chandran@irco.com Zepheny Ferrow(Talent Acquisition Manager-MEIA) Zepheny.ferrow@irco.com Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit www.IRCO.com.

🔧 Job Opening: Simulation Engineer – ANSYS Maxwell (Freelance / Contract) 📍 Location: Remote (UAE Preferred) 💼 Company: Recharga Chargine Private Limited 💰 Compensation: AED 1000 (Fixed, Non-Negotiable) 🔍 About Us Recharga Chargine is an innovation-driven energy hardware startup developing a first-of-its-kind multi-rotor, multi-stator generator with a hybrid axial–radial flux (RADAX) architecture. Our technology is aimed at unlocking compact, high-efficiency power solutions for wind, hydro, and industrial energy systems. We are now looking to work with an experienced Simulation Engineer who can assist us in simulating and validating our 3D CAD model using ANSYS Maxwell (Student or Commercial version). 🎯 Key Responsibilities Import, configure, and clean the RADAX generator model geometry in ANSYS Maxwell. Assign accurate electromagnetic materials and properties to components including: Permanent magnets (NdFeB) Copper windings Laminated steel cores Set up appropriate Eddy Current Simulation and solve for: Magnetic flux distribution Output voltage and induced EMF Core losses (hysteresis, eddy) Cogging torque (if possible) Generate clear reports and visuals of simulation outputs. Suggest design optimizations or corrections if needed. ✅ Requirements Proven experience with ANSYS Maxwell 3D/2D, especially for permanent magnet generator simulations. Proficiency in electromagnetic theory, especially axial and radial flux machines. Ability to interpret CAD files from tools like Fusion 360, SolidWorks, or STEP/IGES formats. Ability to troubleshoot model scaling, material assignment, and meshing issues. Good communication skills for remote coordination. 📌 Deliverables Complete Maxwell simulation file (.aedt) Result reports (PDF/HTML with flux maps, loss analysis, voltage curves) Screenshots or animations of simulation behavior Notes on any assumptions, limitations, or potential improvements 💡 Bonus (Not Required) Prior work on dual flux (axial + radial) generator topologies Understanding of energy conversion systems in wind/hydro setups

🔧 Job Opening: Simulation Engineer – ANSYS Maxwell (Freelance / Contract) 📍 Location: Remote (UAE Preferred) 💼 Company: Recharga Chargine Private Limited 💰 Compensation: AED 1000 (Fixed, Non-Negotiable) 🔍 About Us Recharga Chargine is an innovation-driven energy hardware startup developing a first-of-its-kind multi-rotor, multi-stator generator with a hybrid axial–radial flux (RADAX) architecture. Our technology is aimed at unlocking compact, high-efficiency power solutions for wind, hydro, and industrial energy systems. We are now looking to work with an experienced Simulation Engineer who can assist us in simulating and validating our 3D CAD model using ANSYS Maxwell (Student or Commercial version). 🎯 Key Responsibilities Import, configure, and clean the RADAX generator model geometry in ANSYS Maxwell. Assign accurate electromagnetic materials and properties to components including: Permanent magnets (NdFeB) Copper windings Laminated steel cores Set up appropriate Eddy Current Simulation and solve for: Magnetic flux distribution Output voltage and induced EMF Core losses (hysteresis, eddy) Cogging torque (if possible) Generate clear reports and visuals of simulation outputs. Suggest design optimizations or corrections if needed. ✅ Requirements Proven experience with ANSYS Maxwell 3D/2D, especially for permanent magnet generator simulations. Proficiency in electromagnetic theory, especially axial and radial flux machines. Ability to interpret CAD files from tools like Fusion 360, SolidWorks, or STEP/IGES formats. Ability to troubleshoot model scaling, material assignment, and meshing issues. Good communication skills for remote coordination. 📌 Deliverables Complete Maxwell simulation file (.aedt) Result reports (PDF/HTML with flux maps, loss analysis, voltage curves) Screenshots or animations of simulation behavior Notes on any assumptions, limitations, or potential improvements 💡 Bonus (Not Required) Prior work on dual flux (axial + radial) generator topologies Understanding of energy conversion systems in wind/hydro setups Industry Renewable Energy Power Generation Employment Type Part-time

Create Solution Outline and Macro Design to describe end to end product implementation in Data Platforms including, System integration, Data ingestion, Data processing, Serving layer, Design Patterns, Platform Architecture Principles for Data platform Contribute to pre-sales, sales support through RfP responses, Solution Architecture, Planning and Estimation Contribute to reusable components / asset / accelerator development to support capability development Participate in Customer presentations as Platform Architects / Subject Matter Experts on Big Data, Azure Cloud and related technologies Participate in customer PoCs to deliver the outcomes Participate in delivery reviews / product reviews, quality assurance and work as design authority Required education Bachelor's Degree Preferred education Master's Degree Required technical and professional expertise Experience in designing of data products providing descriptive, prescriptive, and predictive analytics to end users or other systems Experience in data engineering and architecting data platforms Experience in architecting and implementing Data Platforms Azure Cloud Platform Experience on Azure cloud is mandatory (ADLS Gen 1 / Gen2, Data Factory, Databricks, Synapse Analytics, Azure SQL, Cosmos DB, Event hub, Snowflake), Azure Purview, Microsoft Fabric, Kubernetes, Terraform, Airflow Experience in Big Data stack (Hadoop ecosystem Hive, HBase, Kafka, Spark, Scala PySpark, Python etc.) with Cloudera or Hortonworks Preferred technical and professional experience Experience in architecting complex data platforms on Azure Cloud Platform and On-Prem Experience and exposure to implementation of Data Fabric and Data Mesh concepts and solutions like Microsoft Fabric or Starburst or Denodo or IBM Data Virtualisation or Talend or Tibco Data Fabric Exposure to Data Cataloging and Governance solutions like Collibra, Alation, Watson Knowledge Catalog, dataBricks unity Catalog, Apache Atlas, Snowflake Data Glossary etc

Overview: This role is a technical lead role within ICC, Hyderabad that will co-ordinate with Data Science and Analytics team on creation of new digital capabilities and sustaining existing digital capabilities. This role will act as the key technical expert dedicated to Foods Packaging Modeling & Simulation development (70%). This role also has the managerial responsibility of leading all DSA-ICC associates (30%). This role will act as one of the key technical specialists for packaging modeling & simulation. This role also will serve as local simulation team Lead to drive overall deliverables. The role will be responsible for performing simulations using FEM, DEM, CFD and other techniques and providing insights that influence the design and development of R&D applications, with focus on Foods Packaging applications. This role will also Collaborate with internal and external stakeholders in a global setting and will support Troubleshooting & Problem Solving to Diagnose and resolve issues related to simulation models and results. This role also is responsible for developing 3DX Apps, Graphical User Interfaces (GUI) and simulation templates. This role will also provide leadership to all simulation and modelling teams ( including other associates ). Responsibilities: Lead a team of Modelling, Simulation and other SMES of DSA team ( Including Bev Pkgs Teams) based out of Hyderabad. Provide Strategic direction in alignment with global teams and ensure timely delivery of Committed projects. Functional Responsibilities Deliver Foods Packaging Simulation models and apps per Simulation Roadmap and Timeline above Deliver modeling and simulation projects using 3DX, other general purpose and specialized numerical software. Collaborate with Dassault experts directly on delivering perfect packaging simulation templates and apps Design and develop innovative experiments to validate and improve models. Support other senior simulation engineers on assigned simulation tasks including CAD creation, CAD cleaning, meshing, pre-processing, post processing, creating visuals of data Work with external partners, software vendor, university, engineering firms, to develop technologies needed to fulfil PepsiCo need. Additional responsibilities in combining physics-based simulation, sensor technology, data analytics (AI/ML) to deliver digitized innovation projects (digital twin), Support Computational Chemistry projects by data collection and literature research New technology introduction and implementation Qualifications: PhD. with simulation concentration and 8+ years of work experience, MS with 10+ years experience Background in mechanical engineering, solid mechanics or related field Packaging experience with cardboard boxes, films, pallets, is a big plus but not necessary Hands-on experience with commercial software - CFD (ANSYS FLUENT, STAR-CCM+), FEA (ABAQUS, ANSYS Mechanical), DEM (ROCKY, EDEM), COMSOL. Knowledge about computational chemistry (hands on software experience with MOE, Shrodinger a plus) Experience designing and conducting physical testing required to formulate and/or calibrate models, i.e., Wind tunnel, mechanical testing, thermal measurements, Data Acquisition, High speed imagery, etc. Experience with Python, MATLAB, R, JMP a plus. Experience with VR/AR assets creation using KeyShot, Unity, Unreal, or Omniverse a plus. Knowledge and experience in food/beverage production and process engineering a plus – extrusion, drying, frying, mixing, filling, food safety. Strong project management and communication skills. Ability to collaborate with internal and external partners in a global setup. Robust understanding of engineering principle with experience in the area of fluid dynamics, thermodynamics and heat transfer. Experience with state-of-the-art modeling software that capable to model multi-physics problem involving multi-phase fluid flow and heat transfer in engineering and manufacturing processes. Knowledge of how to use simulation to evaluate new and novel technologies for PepsiCo’s innovation in processing/packaging.

Job Overview Jon Role : Senior Manager-CAE Experience :20-25 Years Package : Best Package in the Industry Location :Chennai Education :Graduation / post-graduation in mechanical engineering from reputed engineering college Required Skill Set Role: Lead a team of engineers to support Automobile and Industrial Equipment & Heavy machinery customers in Meshing and virtual validation Regular connect with customer managers & understand their requirements and build a team for CAE Work with Account Sales Mangers (ASMs) in connecting with new customer managers and technical presentations to expand and acquire new customers in CAE domain Experiences: 20+ years of experience working with Industrial Equipment & Heavy machinery companies directly or thru any engineering service providers in the area of CAE. Working knowledge of both Automotive and Off-Highway products is preferred, but majorly in Offhighway / Heavy Machinery . Strong experience in Program management, engineering delivery and operational excellence Interested professionals can share their profile to padmini.m@in.experis.com

Overview This role is a technical lead role within ICC, Hyderabad that will co-ordinate with Data Science and Analytics team on creation of new digital capabilities and sustaining existing digital capabilities. This role will act as the key technical expert dedicated to Foods Packaging Modeling & Simulation development (70%). This role also has the managerial responsibility of leading all DSA-ICC associates (30%). This role will act as one of the key technical specialists for packaging modeling & simulation. This role also will serve as local simulation team Lead to drive overall deliverables. The role will be responsible for performing simulations using FEM, DEM, CFD and other techniques and providing insights that influence the design and development of R&D applications, with focus on Foods Packaging applications. This role will also Collaborate with internal and external stakeholders in a global setting and will support Troubleshooting & Problem Solving to Diagnose and resolve issues related to simulation models and results. This role also is responsible for developing 3DX Apps, Graphical User Interfaces (GUI) and simulation templates. This role will also provide leadership to all simulation and modelling teams ( including other associates ). Responsibilities Lead a team of Modelling, Simulation and other SMES of DSA team ( Including Bev Pkgs Teams) based out of Hyderabad. Provide Strategic direction in alignment with global teams and ensure timely delivery of Committed projects. Functional Responsibilities Deliver Foods Packaging Simulation models and apps per Simulation Roadmap and Timeline above Deliver modeling and simulation projects using 3DX, other general purpose and specialized numerical software. Collaborate with Dassault experts directly on delivering perfect packaging simulation templates and apps Design and develop innovative experiments to validate and improve models. Support other senior simulation engineers on assigned simulation tasks including CAD creation, CAD cleaning, meshing, pre-processing, post processing, creating visuals of data Work with external partners, software vendor, university, engineering firms, to develop technologies needed to fulfil PepsiCo need. Additional responsibilities in combining physics-based simulation, sensor technology, data analytics (AI/ML) to deliver digitized innovation projects (digital twin), Support Computational Chemistry projects by data collection and literature research New technology introduction and implementation Qualifications PhD. with simulation concentration and 8+ years of work experience, MS with 10+ years experience Background in mechanical engineering, solid mechanics or related field Packaging experience with cardboard boxes, films, pallets, is a big plus but not necessary Hands-on experience with commercial software - CFD (ANSYS FLUENT, STAR-CCM+), FEA (ABAQUS, ANSYS Mechanical), DEM (ROCKY, EDEM), COMSOL. Knowledge about computational chemistry (hands on software experience with MOE, Shrodinger a plus) Experience designing and conducting physical testing required to formulate and/or calibrate models, i.e., Wind tunnel, mechanical testing, thermal measurements, Data Acquisition, High speed imagery, etc. Experience with Python, MATLAB, R, JMP a plus. Experience with VR/AR assets creation using KeyShot, Unity, Unreal, or Omniverse a plus. Knowledge and experience in food/beverage production and process engineering a plus - extrusion, drying, frying, mixing, filling, food safety. Strong project management and communication skills. Ability to collaborate with internal and external partners in a global setup. Robust understanding of engineering principle with experience in the area of fluid dynamics, thermodynamics and heat transfer. Experience with state-of-the-art modeling software that capable to model multi-physics problem involving multi-phase fluid flow and heat transfer in engineering and manufacturing processes. Knowledge of how to use simulation to evaluate new and novel technologies for PepsiCo’s innovation in processing/packaging.

The role involves Product-development in CAE department of the Business-unit "Stabilizer Systems" within advanced development projects in pre-development phase and customer engineering projects with the incoming RFQs. This includes pre-process activities and post process analysis. Close collaboration with our Germany CAE Team, which will define the targets and process during the project development with non-linearity CAE models neither in materials nor in geometry and boundary conditions. Managing CAE simulations in term of: Software use for the daily work – Ansys Meshing simulation models according to OEMs + MUBEA quality mesh standards. Define components interaction and material definitions. Development of internal systems to generate an improved information flow and easy workaround. Close collaboration with the CAD/CAE team to develop simulation requirements in the field of chassis components and with the project leaders of customer developments to support them with the needed information regarding simulation results acc. to customer specifications. Qualification & Experience: Engineering degree in Mechanical, Automotive, Mechatronics, or a related technical field. Work experience: 3-6 years with same or similar position. Previous knowledge in CAE project’s development. Proficient in using pre and post process CAE software: Ansys, HyperMesh and Abaqus. Desired previous expertise in metallic & plastic materials simulations. Strong collaboration and proactive aptitude with the team colleagues. Analytical and conceptual thinking combined with a high degree of initiative and problem-solving skills. High capacity of working without regular direct supervision. Working experience with foreign counterparts.

Responsibilities: Visit educational institutions in and around Chennai to generate enquiries for our training programs. Understand customer requirements. Undertake other marketing or sales-related tasks to support the company objectives. Annual bonus Food allowance

Job Title: CFD Engineer Automotive Thermal Systems Experience: 2 to 4 years Location: Bangalore/Bengaluru Tools: Star-CCM+, ANSA/Hypermesh (optional), MATLAB/Python (optional) Job Summary: We are looking for a passionate and detail-oriented CFD Engineer with experience in thermal systems and heat transfer simulations within the automotive industry . The ideal candidate should have hands-on expertise in Star-CCM+ and be capable of independently executing 3D CFD simulations for engine cooling, HVAC systems, battery thermal management , and other heat-sensitive components. Key Responsibilities: Perform 3D CFD simulations using Star-CCM+ for various thermal systems in vehicles. Analyze cooling performance of powertrain components (engine, e-motor, battery, inverter, etc.). Develop thermal models for underhood airflow , radiator/heat exchanger performance , cabin HVAC , etc. Interpret and validate CFD results against experimental data or benchmarks. Work closely with design , testing , and systems teams to recommend improvements based on CFD insights. Ensure simulation practices follow industry best standards for mesh quality, solver settings, and boundary conditions. Optimize designs by performing parametric studies , DOE , and sensitivity analysis . Must-Have Skills: Minimum 1 year of hands-on experience in automotive CFD (thermal domain). Strong expertise in Star-CCM+ for thermal/heat transfer problems. Good understanding of fluid dynamics, heat exchangers, thermal conduction/convection . Experience with model setup, meshing, solver controls , and post-processing in Star-CCM+. Familiar with thermal systems in ICE and EV platforms . Working knowledge of CAD tools (CATIA, NX) and pre-processing software like ANSA or Hypermesh. Solid problem-solving and analytical skills. Good to Have: Exposure to Multiphysics simulations (e.g., Conjugate Heat Transfer, Multiphase Flow). Education: Masters degree in Mechanical / Automotive / Thermal Engineering or a related field.

🔧 Job Opening: Simulation Engineer – ANSYS Maxwell (Freelance / Contract) 📍 Location: Remote (UAE Preferred) 💼 Company: Recharga Chargine Private Limited 💰 Compensation: AED 1000 (Fixed, Non-Negotiable) 🔍 About Us Recharga Chargine is an innovation-driven energy hardware startup developing a first-of-its-kind multi-rotor, multi-stator generator with a hybrid axial–radial flux (RADAX) architecture. Our technology is aimed at unlocking compact, high-efficiency power solutions for wind, hydro, and industrial energy systems. We are now looking to work with an experienced Simulation Engineer who can assist us in simulating and validating our 3D CAD model using ANSYS Maxwell (Student or Commercial version). 🎯 Key Responsibilities Import, configure, and clean the RADAX generator model geometry in ANSYS Maxwell. Assign accurate electromagnetic materials and properties to components including: Permanent magnets (NdFeB) Copper windings Laminated steel cores Set up appropriate Eddy Current Simulation and solve for: Magnetic flux distribution Output voltage and induced EMF Core losses (hysteresis, eddy) Cogging torque (if possible) Generate clear reports and visuals of simulation outputs. Suggest design optimizations or corrections if needed. ✅ Requirements Proven experience with ANSYS Maxwell 3D/2D, especially for permanent magnet generator simulations. Proficiency in electromagnetic theory, especially axial and radial flux machines. Ability to interpret CAD files from tools like Fusion 360, SolidWorks, or STEP/IGES formats. Ability to troubleshoot model scaling, material assignment, and meshing issues. Good communication skills for remote coordination. 📌 Deliverables Complete Maxwell simulation file (.aedt) Result reports (PDF/HTML with flux maps, loss analysis, voltage curves) Screenshots or animations of simulation behavior Notes on any assumptions, limitations, or potential improvements 💡 Bonus (Not Required) Prior work on dual flux (axial + radial) generator topologies Understanding of energy conversion systems in wind/hydro setups

🔧 Job Opening: Simulation Engineer – ANSYS Maxwell (Freelance / Contract) 📍 Location: Remote (UAE Preferred) 💼 Company: Recharga Chargine Private Limited 💰 Compensation: AED 1000 (Fixed, Non-Negotiable) 🔍 About Us Recharga Chargine is an innovation-driven energy hardware startup developing a first-of-its-kind multi-rotor, multi-stator generator with a hybrid axial–radial flux (RADAX) architecture. Our technology is aimed at unlocking compact, high-efficiency power solutions for wind, hydro, and industrial energy systems. We are now looking to work with an experienced Simulation Engineer who can assist us in simulating and validating our 3D CAD model using ANSYS Maxwell (Student or Commercial version). 🎯 Key Responsibilities Import, configure, and clean the RADAX generator model geometry in ANSYS Maxwell. Assign accurate electromagnetic materials and properties to components including: Permanent magnets (NdFeB) Copper windings Laminated steel cores Set up appropriate Eddy Current Simulation and solve for: Magnetic flux distribution Output voltage and induced EMF Core losses (hysteresis, eddy) Cogging torque (if possible) Generate clear reports and visuals of simulation outputs. Suggest design optimizations or corrections if needed. ✅ Requirements Proven experience with ANSYS Maxwell 3D/2D, especially for permanent magnet generator simulations. Proficiency in electromagnetic theory, especially axial and radial flux machines. Ability to interpret CAD files from tools like Fusion 360, SolidWorks, or STEP/IGES formats. Ability to troubleshoot model scaling, material assignment, and meshing issues. Good communication skills for remote coordination. 📌 Deliverables Complete Maxwell simulation file (.aedt) Result reports (PDF/HTML with flux maps, loss analysis, voltage curves) Screenshots or animations of simulation behavior Notes on any assumptions, limitations, or potential improvements 💡 Bonus (Not Required) Prior work on dual flux (axial + radial) generator topologies Understanding of energy conversion systems in wind/hydro setups