Description Job Summary: The Electrician Level II is responsible for performing electrical maintenance, troubleshooting, and support activities across manufacturing equipment and plant systems. This role ensures the availability, reliability, and safety of machinery and control systems through proactive maintenance, repairs, and continuous improvement initiatives. Working with limited supervision, the technician applies deep technical knowledge of electrical, control, and mechatronic systems while adhering strictly to safety, quality, and environmental standards. Key Responsibilities Health, Safety & Environment (HSE): Identify and immediately report hazards and incidents. Comply with HSE policies and wear required PPE. Promote a safety-first culture by proactively addressing unsafe conditions and participating in safety audits, risk assessments, LOTO, and training. Quality Maintain high standards of workmanship. Follow maintenance SOPs and quality procedures. Provide feedback for preventive maintenance (PM) plans and conduct equipment failure root cause analysis. Perform inspections and tests to ensure work meets Cummins quality standards. Maintenance & Repair Conduct preventive, corrective, predictive, and emergency maintenance on CNC HMCs and other manufacturing machinery. Troubleshoot electrical, mechanical, hydraulic, pneumatic, coolant, and lubrication systems. Ensure timely documentation of maintenance activities and support spare part planning, procurement, and inventory with the CIP team. Technical Operations Support control system development, sensor applications, and automation upgrades using tools such as Siemens TIA Portal, SCADA, and MES systems. Manage software backups (e.g., IPC Ghost images, PLC/CNC programs). Work on cost-saving and green energy initiatives (I4.0 automation, energy-efficient systems, etc.). Team Collaboration & Continuous Improvement Communicate effectively across maintenance, production, and support teams. Mentor junior team members and document key learnings via SOPs and One Point Lessons. Engage in Kaizen, TPM, and CI activities to drive productivity, safety, and reliability improvements. Responsibilities Competencies: Health and Safety Fundamentals Safety Controls & System Security Electrical System Troubleshooting Factory Automation & Machine Programming Controls Networking & Engineering Knowledge Manufacturing Knowledge & Sensor Technology Collaborates & Communicates Effectively Customer Focus & Drives Results Decision Quality & Nimble Learning Values Differences Required Education, Licenses, And Certifications Minimum: High school diploma or equivalent. Preferred: Diploma or Degree in Mechatronics, Electrical, Electronics, or Controls Engineering. Export control regulations may apply depending on the plant location. Experience Requirements External Candidates: 3–5 years of hands-on experience in electrical and mechanical maintenance in a manufacturing setting, specifically with CNC Horizontal Machining Centers (HMCs). Internal Candidates: 5–10 years of relevant experience, ideally with exposure to ignition SCADA, SQL databases, MES, and TPM systems. Qualifications Key Technical Skills: Industrial Automation & PLC Systems: Siemens (Sinumerik 1, 828), Allen Bradley, Mitsubishi, Fanuc, Omron PLC Programming Tools: TIA Portal V15.1–V19, SIMATIC Manager, RS Logix 500, GX Works Sensors & Instrumentation: Cognex, IFM, Leuze, Zenon, SIGMA Software Digital Communication Protocols: Ethernet/IP, Profibus, Profinet, RS232, CC-Link Drives: Siemens G120, Mitsubishi VFDs CNC Machine Systems: MAG, MAZAK, MAKINO, Desoutter Nut Runners, Nagel Honing, GUDEL Gantry Equipment Knowledge: APCs, ATLAS COPCO tools, VISION systems, washing machines, TOX leak testers, Marposs gauges Additional Tools: CMES, IPC backups, SCADA, MES, calibration tools, laser marking, pump/motor systems Soft Skills Effective communication Team leadership and mentoring Strong documentation and MIS reporting Time and task management under pressure Proactive mindset and self-motivation Working Conditions Flexible to work multiple shifts and overtime. Capable of lifting heavy components and working in confined spaces. Committed to upholding Cummins Safety Policy, TPM, 5S, and continuous improvement culture. Preferred Qualifications Experience in cylinder block/head machining and test cell equipment Exposure to energy conservation initiatives and predictive maintenance techniques Certifications in CNC machining, safety (e.g., OSHA), or industrial automation Job Manufacturing Organization Cummins Inc. Role Category On-site Job Type Shop ReqID 2414948 Relocation Package Yes Show more Show less

About Vision Mechatronics: Vision Mechatronics, founded in 2009, is an Indian technology company specializing in robotics, renewable energy, and lithium-ion energy storage solutions. The company offers a range of lithium-ion backed energy storage units suitable for residential, industrial, commercial applications, and electric vehicles. Their products include the "World's Smartest Lithium Battery" and systems with active balancing technology. We are seeking a competent and enthusiastic Senior Hardware Design Engineer with expertise in Altium Designer and a strong background in hardware design and testing for power systems and renewable energy domains. Role Overview: As a Senior Hardware Design Engineer, you will play a critical role in designing, executing, and supporting product development for both low-voltage and high-voltage applications. You will work in a dynamic environment, collaborating across teams to drive innovation, reliability, and performance in our products. The ideal candidate is highly motivated, detail-oriented, and solution-driven, with a relentless focus on delivering high-quality, on-time results. This role requires someone who does not limit themselves by defined responsibilities but instead takes ownership to ensure the success of the product. Key Responsibilities: Design and develop analog, digital, and mixed-signal circuits, including motor control systems, power supplies, and embedded hardware Create circuit schematics, perform simulations (PSPICE, LTSPICE), and oversee PCB layouts Optimize hardware designs for manufacturability, reliability, and regulatory compliance. Perform detailed component selection, including resistors, capacitors, diodes, transistors, MOSFETs, IGBTs, gate drivers, and overcurrent/overvoltage protection circuits. Ensure compliance with EMI/EMC regulations, troubleshoot and resolve electromagnetic interference issues. Conduct detailed electrical analysis, calculating currents and voltages across all circuit components. Prepare engineering documentation, including hardware design documents, test plans, and validation reports. Research and implement emerging technologies to drive innovation in power electronics and embedded hardware. Evaluate and recommend cost-effective, scalable technological alternatives for future product development. Apply thermal management techniques and electromagnetic compatibility (EMC) best practices in hardware design. Ensure strict adherence to safety standards and regulatory requirements throughout the development lifecycle. Demonstrate expertise in ISO 26262 functional safety standards, specifically ASIL C/ASIL D-compliant designs. Collaborate closely with cross-functional teams, including firmware, software, and system engineering, to ensure seamless product integration. Qualifications & Skills: BE/ B.Tech OR ME / MTech / MS in Electonics / Electrical / Instrumentation / Robotics, etc. 5+ years of hands-on experience in electronic hardware design and testing. Strong expertise in Altium Designer for schematic capture, PCB layout, and design reviews. In-depth knowledge of power electronics, communication protocols and controllers. Experience in EMI/EMC compliance, thermal management, and functional safety (ISO 26262 ASIL C/D). Proficiency in circuit simulation tools (PSPICE, LTSPICE) and hardware debugging techniques. Ability to analyze and optimize PCB layouts for signal integrity, power efficiency, and thermal performance. Strong problem-solving skills with the ability to troubleshoot hardware issues at both component and system levels. Passion for electric mobility and automotive innovation, with a proactive and ownership-driven mindset Job Types: Full-time, Permanent Benefits: Health insurance Schedule: Day shift Supplemental Pay: Performance bonus Work Location: In person Requirements Qualifications & Skills: BE/ B.Tech OR ME / MTech / MS in Electonics / Electrical / Instrumentation / Robotics, etc. 5+ years of hands-on experience in electronic hardware design and testing. Strong expertise in Altium Designer for schematic capture, PCB layout, and design reviews. In-depth knowledge of power electronics, communication protocols and controllers. Experience in EMI/EMC compliance, thermal management, and functional safety (ISO 26262 ASIL C/D). Proficiency in circuit simulation tools (PSPICE, LTSPICE) and hardware debugging techniques. Ability to analyze and optimize PCB layouts for signal integrity, power efficiency, and thermal performance. Strong problem-solving skills with the ability to troubleshoot hardware issues at both component and system levels. Passion for electric mobility and automotive innovation, with a proactive and ownership-driven mindset Benefits Benefits: Health insurance Supplemental Pay: Performance bonus Show more Show less

Role & responsibilities 5-7 Years of Experience with On Shape Tool Experience # Hands on Experience in New product design, VAVE Efforts with knowledge in Stage Gate Process, applying DFX methodologies # Sustenance engineering support in existing products through Engineering change orders # Desirable to have exposure to LED Lighting, Thermal Management, Electical wiring, Electrical Calculations # Hands on in CAD tools proficiency desirable tools Solidworks, Onshape, SolidEdge # ERP Tool Experience SAP # Good understading in material selection, design considerations, manufactuing process for materials like Die-cast, Sheetmetal, Plastics # Exposure to standards like ASME Drawing standards, use of GD&T symbols, desirable to have exposure to UL 1598, UL8750 # Good Communication & Collaboration # Problem-Solving & Critical Thinking # Adaptability & Innovation

IoTechWorld Avigation Pvt Ltd, Gurgaon is a drone manufacturing company (www.iotechworld.com) and is seeking a passionate and skilled BLDC Motor Design & Development Engineer to join our team in building next-generation electric motor solutions. You will be responsible for the complete lifecycle of Brushless DC (BLDC) motors—from concept design and electromagnetic modelling to prototyping, testing, and validation. Key Responsibilities : • -Minimum 7 Years experience in Design and optimize BLDC motors for various applications (e.g., EVs, drones, robotics, HVAC, industrial automation). -Perform electromagnetic simulations using tools like Ansys Motor-CAD, Maxwell, JMAG, or Flux. -coordinate with other team members on mechanical aspects of motor design—stator/rotor topology, lamination, housing, cooling systems, etc. - Participate in prototyping, testing (no-load, load, efficiency, thermal), and validation of motor systems. - Prepare design documentation, BOMs, and test reports. - Collaborate with cross-functional teams including hardware, firmware, manufacturing, and quality. - Support troubleshooting and improvement of existing motor designs in the field. Requirements : Must-Have: Bachelor’s or Master’s degree in Electrical Engineering and Mechatronics. -Hands-on experience with BLDC / PMSM motor design and electromagnetic simulation. - Proficient with simulation tools such as Ansys Motor-CAD, Maxwell, JMAG, or similar. - Knowledge of motor winding configurations, magnetic materials, and thermal management. - Basic understanding of motor control (FOC, trapezoidal, sinusoidal). - Strong problem-solving and analytical skills. Nice-to-Have: - Familiarity with industry standards for electric motors. - Understanding of manufacturing processes for motor components. Salary : Best in Industry and not a constraint for good candidate Show more Show less

Job Description This is a remote position. We are seeking a talented and passionate Robotics Instructor to join our teaching team at Enthuziastic. The ideal candidate should have strong technical expertise in robotics and automation, hands-on experience with popular robotics platforms (e.g., LEGO Mindstorms, VEX, Arduino, Raspberry Pi), and the ability to inspire and guide students of various age groups and skill levels through engaging virtual lessons. As a Robotics Instructor, you will play a pivotal role in developing students’ understanding of engineering principles, programming logic, and creative problem-solving. You’ll help them build confidence by guiding them through hands-on projects, competitions, and real-world applications of robotics. Key Responsibilities Conduct live, interactive online robotics classes using platforms like Zoom. Teach fundamentals of mechanical design, electronics, sensors, and actuators. Introduce programming languages and tools (e.g., Python, C/C++, Scratch) for robotics control. Guide students through building, testing, and troubleshooting their own robotic creations. Develop customized lesson plans and project-based curricula tailored to beginner, intermediate, and advanced learners. Prepare students for robotics competitions, science fairs, or certification exams. Provide constructive feedback, track progress with regular assessments, and showcase student projects. Encourage teamwork, innovation, and design thinking through collaborative challenges and hackathons. Requirements Educational Background Bachelor’s or Master’s degree in Robotics, Mechanical/Electrical/Electronics Engineering, Computer Science, Mechatronics, or a related field. Certification in robotics education or STEM teaching is a plus. Skills & Experience 2+ year of experience teaching robotics or STEM subjects (online or offline). Proficient with robotics kits and platforms (e.g., LEGO Mindstorms, VEX, Arduino, Raspberry Pi). Solid programming skills in one or more of: Python, C/C++, Java, or Scratch. Strong knowledge of electronics, sensors, and control systems. Excellent communication and interpersonal skills, with the ability to simplify complex concepts. Experience designing hands-on projects and guiding students through end-to-end builds. Comfortable using digital tools, simulation software (e.g., Tinkercad, Gazebo), and virtual whiteboards. Technical Requirements Reliable internet connection and a professional home studio setup. Familiarity with Zoom, audio-visual equipment, and screen-sharing best practices. Ability to share CAD models, circuit diagrams, and code samples digitally. Benefits Flexible teaching schedule with fully remote work. A creative and respectful environment for passionate musicians. Access to a wide learner base across countries and age groups. Competitive compensation based on experience and performance. Continuous support and development opportunities for instructors. If you’re passionate about robotics and empowering the next generation of innovators, we’d love to hear from you! Requirements Robotics, Circuit Design, Sensor Integration, Simulation, Python, C Programming, STEM, Java, Circuit Diagrams, Digital Tools, Online Teaching Show more Show less

Production Engineer Key Areas of responsibility Responsible for assembly and testing of the medical devices according to specific work instruction Active Contribution to the continuos improvement process in production Create and Maintain the Device History record of each system Plan and complete the assigned production task within the defined time to meet deadlines Identify and resolve the quality issues with proper root cause analysis and problem solving techniques Job knowledge, skills and experience Diploma in Electrical -electronics, mechatronics engineering with 2-4 years of experience in assembly and testing of electromechanical systems. Experience in assembly and testing of Magnetic resonance Imaging or Computed Tomography or X-ray systems with basic know how of X-ray technology is preferable Knowledge in SAP or similar ERP systems Passionate to learn new products in a quick manner. Able to learn and implement change in the production line Analytical and practical approach to problem solving. Demonstrates ability to be a team player; works well with others; contributes positively to work in team environment Excellent organizational skills, including the ability to plan and prioritize effectively in order to meet deadlines Excellent communication and interpersonal skills both written and verbal, ability to develop outstanding relationships with all stakeholders from the entire organization. Ability to work effectively under pressure whilst retaining a strong eye for detail Must possess strong proficiency in MS-Office tools.

As a Production Engineering Intern at Fracktal Works, you will gain hands-on experience in various aspects of 3D printer production and operations. You will work closely with our experienced engineers to optimize production processes, troubleshoot issues, and contribute to the overall efficiency and quality of our products. Key Responsibilities: Production Support : Assist in monitoring and optimizing production processes. Support routine maintenance and troubleshooting of 3D printing equipment. Learn about production processes, SOPs, and workflows. Assist in inventory management and procurement. Process Improvement : Identify opportunities for process improvement and suggest solutions. Participate in the development and implementation of new processes. Post-Deployment Support : Assist in troubleshooting and resolving post-deployment issues. Collaborate with the R&D team to implement design changes. Cross-Functional Collaboration : Work closely with other teams, such as R&D, sales, and customer support. Qualifications: Currently pursuing a bachelor s degree in mechanical, Electrical, Electronics, Mechatronics, Industrial Engineering, or a related field. Basic understanding of manufacturing processes and quality control principles. Strong problem-solving and analytical skills. Good communication and interpersonal skills. A willingness to learn and adapt to new technologies and processes. Ability to work independently and as part of a team.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Chennai Employment Status: Salary Full-Time Function: Engineering Req ID: 26712 Job Responsibilities Provide technical support for the team for robotic programming/path planning related activities Develop and program robotic welding paths to ensure optimal performance and efficiency Simulate robotic movements and welding sequences to validate fixture designs and optimize production workflows. Work closely with design engineers to evaluate welding fixture designs and provide feedback for manufacturability and automation suitability. Conduct feasibility studies and collision detection simulations to prevent errors in the production environment. Utilize robotic simulation software and offline programming tools to create and test robotic programs before deployment. Ensure compliance with safety standards and best practices for robotic welding applications. Troubleshoot and optimize robotic welding programs to improve cycle time and quality. Should functions as a technical point of contact for assigned work package scope Maintain up to date knowledge of relevant tools and technologies Should be able to work with 3D Models and computer simulations Create technical documentation using Microsoft word, Excel, Etc., Document programming processes, changes, and improvements for future reference. Should be able to work productively to ensure the tasks are completed within timeline Job Requirements Bachelor or Master Degree in Mechanical Engineering, Mechatronics or Relevant field 5-8 years of experience as a mechanical Engineer in robotic cell, robot handling Experience in robotic programming, specifically for welding applications (Worked with ABB and Fanuc is an added advantage) Experience in offline programming and real-world deployment of robotic welding systems. Proficiency in robotic simulation software especially Robostudio and Roboguide Strong understanding of industrial automation, path planning, and motion control. Knowledge of PLC programming and industrial control systems. Familiarity with welding processes, welding parameters, and robotic welding techniques. Ability to troubleshoot robotic systems and optimize welding processes for quality and efficiency. Hands on experience in industrial environments, safety protocols and know-how on robots. Exposure to Industry 4.0 technologies and smart manufacturing. Certification in any robotic programming /courses is a plus Good understanding of mechanical engineering fundamentals (physics, materials, Standards) Knowledge in robot trouble shooting Good knowledge in design of jigs and fixtures and welding Should have strong analytical skills and attention to detail. Should have good communication skills Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law. Show more Show less

Description The Electrician Level II is responsible for performing electrical maintenance, troubleshooting, and support activities across manufacturing equipment and plant systems. This role ensures the availability, reliability, and safety of machinery and control systems through proactive maintenance, repairs, and continuous improvement initiatives. Working with limited supervision, the technician applies deep technical knowledge of electrical, control, and mechatronic systems while adhering strictly to safety, quality, and environmental standards. Key Responsibilities Health, Safety & Environment (HSE): Identify and immediately report hazards and incidents. Comply with HSE policies and wear required PPE. Promote a safety-first culture by proactively addressing unsafe conditions and participating in safety audits, risk assessments, LOTO, and training. Quality Maintain high standards of workmanship. Follow maintenance SOPs and quality procedures. Provide feedback for preventive maintenance (PM) plans and conduct equipment failure root cause analysis. Perform inspections and tests to ensure work meets Cummins quality standards. Maintenance & Repair Conduct preventive, corrective, predictive, and emergency maintenance on CNC HMCs and other manufacturing machinery. Troubleshoot electrical, mechanical, hydraulic, pneumatic, coolant, and lubrication systems. Ensure timely documentation of maintenance activities and support spare part planning, procurement, and inventory with the CIP team. Technical Operations Support control system development, sensor applications, and automation upgrades using tools such as Siemens TIA Portal, SCADA, and MES systems. Manage software backups (e.g., IPC Ghost images, PLC/CNC programs). Work on cost-saving and green energy initiatives (I4.0 automation, energy-efficient systems, etc.). Team Collaboration & Continuous Improvement Communicate effectively across maintenance, production, and support teams. Mentor junior team members and document key learnings via SOPs and One Point Lessons. Engage in Kaizen, TPM, and CI activities to drive productivity, safety, and reliability improvements. Responsibilities Competencies: Health and Safety Fundamentals Safety Controls & System Security Electrical System Troubleshooting Factory Automation & Machine Programming Controls Networking & Engineering Knowledge Manufacturing Knowledge & Sensor Technology Collaborates & Communicates Effectively Customer Focus & Drives Results Decision Quality & Nimble Learning Values Differences Required Education, Licenses, And Certifications Minimum: High school diploma or equivalent. Preferred: Diploma or Degree in Mechatronics, Electrical, Electronics, or Controls Engineering. Export control regulations may apply depending on the plant location. Experience Requirements External Candidates: 3–5 years of hands-on experience in electrical and mechanical maintenance in a manufacturing setting, specifically with CNC Horizontal Machining Centers (HMCs). Internal Candidates: 5–10 years of relevant experience, ideally with exposure to ignition SCADA, SQL databases, MES, and TPM systems. Qualifications Key Technical Skills: Industrial Automation & PLC Systems: Siemens (Sinumerik 1, 828), Allen Bradley, Mitsubishi, Fanuc, Omron PLC Programming Tools: TIA Portal V15.1–V19, SIMATIC Manager, RS Logix 500, GX Works Sensors & Instrumentation: Cognex, IFM, Leuze, Zenon, SIGMA Software Digital Communication Protocols: Ethernet/IP, Profibus, Profinet, RS232, CC-Link Drives: Siemens G120, Mitsubishi VFDs CNC Machine Systems: MAG, MAZAK, MAKINO, Desoutter Nut Runners, Nagel Honing, GUDEL Gantry Equipment Knowledge: APCs, ATLAS COPCO tools, VISION systems, washing machines, TOX leak testers, Marposs gauges Additional Tools: CMES, IPC backups, SCADA, MES, calibration tools, laser marking, pump/motor systems Soft Skills Effective communication Team leadership and mentoring Strong documentation and MIS reporting Time and task management under pressure Proactive mindset and self-motivation Working Conditions Flexible to work multiple shifts and overtime. Capable of lifting heavy components and working in confined spaces. Committed to upholding Cummins Safety Policy, TPM, 5S, and continuous improvement culture. Preferred Qualifications Experience in cylinder block/head machining and test cell equipment Exposure to energy conservation initiatives and predictive maintenance techniques Certifications in CNC machining, safety (e.g., OSHA), or industrial automation Show more Show less

Electronics Engineers with good knowledge of engineering concepts and who need to provide online support for device maintenance and replacements at the various operational locations. Requirements Good knowledge in electronics engineering concepts (BE or Diploma in Electronics/EEE/Mechatronics only). 1 to 2 years experience. Excellent communication in English and Hindi (and any other language ie. Malayalam, Telugu, Kannada). Experience in working with teams will be an added advantage. Ability to learn and train operations team members based on good knowledge of product and solutions. LOCATION: CHENNAI & DELHI QUALIFICATION: 1 to 2 years Experience, GRADUATION

Job Description: We are now looking for an experienced and qualified candidate with the main mission to work as Team Manager - Automation. Your main responsibilities in this role will be: We are seeking an experienced Team Manager with a technical background in embedded electronic control systems for mining and construction equipment. You will lead engineers in developing innovative control system solutions, including remote control and autonomous systems with capabilities in perception, path planning, and simulation. As a Team Manager, you will collaborate with global stakeholders to understand the requirements of Epiroc's customers and internal teams, ensuring the delivery of optimal solutions swiftly using agile methodologies. You will be responsible for recruitment, mentoring, coaching, and performance reviews, building and managing cross-functional agile teams with expertise in niche technical areas. You will foster innovation and provide the necessary support to empower your teams. Understand technical requirements from stakeholders, build teams and help them deliver the right solutions. Be approachable and available to stakeholders and the team, actively working to remove any hindrances. Foster an inclusive and welcoming environment where all team members feel valued and included. Empower innovation in teams and encourage creative thinking. Mentor and coach the team, conducting performance and development reviews to foster a high-performing and innovative team environment. Develop competencies, and recruit new talent to meet current and future needs Develop and nurture the agile way of working within your teams, ensuring alignment with Epiroc's values. Manage the budget, resources, and timelines of projects. Guide the team in developing competencies in control systems, including tele-op systems, sensor fusion, path planning, and simulation. Stay updated with the latest trends and advancements in Automotive Embedded Control Systems, Remote Control, Autonomous Robotic technologies. Qualification and Experience Requirements: 10-15+ years of experience in automation and electronic control systems, with a focus on product development and people management. Bachelor's or Master's degree in Electronics, Mechatronics, Robotics, Electrical Engineering, Mechanical Engineering, or a related field. Servant leadership approach with a can-do attitude and a curiosity to learn. Experience in leading automation projects and teams in the automotive, mining or construction Industries Excellent communication and project management abilities. Proficiency in embedded electronic control systems, MATLAB Simulink, Linux operating systems, and embedded programming in C, C++, and QNX. Experience working with GitHub and/or similar version control systems. Good to have: Master's degree in a related field. Knowledge of the latest advancements in Control Systems, AI, Software Defined Vehicles, and model-based development. Agile certifications Personality Requirements: Enthusiastic, positive-minded, and able to work well in an international client environment. Strong interpersonal, communication, and analytical skills. Self-starter and goal-oriented. Attention to detail and a strong sense of accountability. Team player who is open-minded and flexible. Location: This position is located in Chennai, India. In this recruitment process we review applications continuously. Welcome with your application as soon as possible, but no later than 15th June 2025. Epiroc is a global productivity partner for mining and construction customers, and accelerates the transformation toward a sustainable society. With ground-breaking technology, Epiroc develops and provides innovative and safe equipment, such as drill rigs, rock excavation and construction equipment and tools for surface and underground applications. The company also offers world-class service and other aftermarket support as well as solutions for automation, digitalization and electrification. Epiroc is based in Stockholm, Sweden, had revenues of more than SEK 60 billion in 2023, and has around 18 200 passionate employees supporting and collaborating with customers in around 150 countries. Learn more at www.epirocgroup.com. Show more Show less

Job Title: Robotics Engineer Location: Noida, Uttar Pradesh Company: ONE Simulation Job Type: Full-time | On-site Experience Level: Entry to Mid-Level Salary: Competitive, based on experience About ONE Simulation ONE Simulation is a leading innovator in AI-powered medical training and simulation technologies. We're integrating robotics, AI, and advanced simulation to create radiation-free CT simulators and immersive learning environments. We are seeking a Robotics Engineer who is passionate about building the future of medical training through intelligent, responsive robotic systems. Key Responsibilities Design, develop, and test robotic components and systems for simulation-based medical training devices. Integrate hardware and software for real-time sensor-actuator feedback loops. Develop control algorithms for robotic systems (motion, positioning, accuracy). Work closely with the AI and software development teams to embed intelligent features into robotic platforms. Evaluate and troubleshoot mechanical and electrical systems. Contribute to prototype development and iterative testing in real-world environments. Requirements Bachelor's or Master’s degree in Robotics, Mechatronics, Mechanical Engineering, Electrical Engineering, or a related field. 1–3 years of experience in robotics or automation projects (freshers with strong project work may also apply). Hands-on experience with microcontrollers, sensors, actuators, and robotic arms. Proficiency in programming languages such as Python, C/C++, or ROS (Robot Operating System). Solid understanding of kinematics, dynamics, and control systems. Strong problem-solving skills and a collaborative mindset. Nice to Have Experience with simulation environments (Gazebo, V-REP, or Unity). Exposure to AI/ML integration in robotics. Familiarity with CAD tools (SolidWorks, AutoCAD). Understanding of safety standards in medical device development. Walk-In Interview Details Date: 2nd June to 6th June 2025 Time: 11:00 AM to 02:00 PM Venue: ONE Simulation, [Insert Full Office Address], Noida Bring your updated resume and portfolio (if available). On-the-spot technical rounds and discussions will be conducted. Why Join ONE Simulation? Work on cutting-edge tech that directly impacts healthcare training and safety. Opportunity to innovate and build real-world robotics solutions from the ground up. Collaborative work culture with a strong focus on R&D. Career growth in one of India’s most innovative simulation tech companies. Job Type: Full-time Pay: ₹17,167.10 - ₹59,223.65 per month Schedule: Day shift Work Location: In person

About Company and Profile Frootle India Private Limited is in the business of curating innovative Home, Kitchen and Wellness brands. We are the exclusive Indian partner for 19 international brands. With over 300+ dedicated team members spread across the nation, our mission is simple: to ensure every customer's experience is nothing short of delightful. Some of the well-known brands are: 1. Ecovacs - Robotic Vacuum Cleaners 2. Kuvings - Cold press Juicers, Blenders 3. Coway - Air purifiers 4. Instant Brands - Electric Pressure Cooker and Air Fryer 5. EcoFlow - Portable Power Stations & home backup solution 6. XGIMI - Smart Portable Projectors 7. Laifen - Smart Hair Dryers 8. Cosori - Air Fryers 9. Levoit - Air Purifiers 10. Laura Star - Hygienic Steamers and Steam Iron Website: www.frootleindia.com We are looking for enthusiastic engineers who want to build their career in core engineering profile with these global brands pioneering in latest industry technology. Roles and Responsibilities Using various strategies and tools to provide effective solutions to customers' concerns. Communicating with clients, engineers, and other technicians to ensure that services are delivered effectively. Promptly following up on service requests and close them effectively Delivering demonstrations to ensure that customers are educated on safe and effective equipment use. Build and maintain relationships and rapport with customers. Ensure customer satisfaction and good experience. Coordinating and facilitating a smooth flow of communication within the internal teams. Retain existing customers and increase brand loyalty Inform customers about new features and functionalities. Follow up with customers to ensure their technical issues are resolved. Gather customer feedback and share it with our Product, Sales, and Marketing teams. Manage customer relationships and create repeat purchase Required Candidate profile A bachelor's degree in Mechanical/Electronics/Mechatronics/Robotics Engineering Excellent verbal, listening and customer service skills. Ability to identify problem and solve it proactively Ability to deal with multiple requests Ability to remain patient and professional under pressure. Superb work ethic and a growth mindset. The ability to convince and explain technical information to customers. The ability to teardown product and understand parts involved and how it works. English & Local Regional Language Mandatory Vehicle (2-wheeler) Mandatory. Immediate joining. Freshers preferred. Perks and Benefits - Performance based Sales and Feedback Incentives (best in the industry) - Complete travel allowance - Paid Sick leave - Performance Bonus - Complete Training with Industry experts Role: FieldService Engineer Industry Type: Consumer Electronics & Appliances Department: Customer Success, Service & Operations Employment Type: Full Time, Permanent Role Category: After Sales Service & Repair Education UG: Diploma in Mechanical, B.Tech/B.E. in Electronics/Telecommunication, Electrical and Electronics, Instrumentation, Mechanical, Electrical. Job Type: Full-time CTC: ₹500,000.00 - ₹600,000.00 per year Benefits: Health insurance Schedule: Day shift Supplemental Pay: Performance bonus Job Types: Full-time, Permanent Pay: ₹500,000.00 - ₹600,000.00 per year Benefits: Cell phone reimbursement Health insurance Schedule: Day shift Supplemental Pay: Performance bonus Work Location: In person

Job Title: Sr. Control and Automation Engineer Location: Job Type: Full-Time Salary: 30K – 40K Job Summary: We are seeking an experienced Control and Automation Manager to lead the design, development, and implementation of automation solutions across various industrial and building automation applications. The ideal candidate will have a strong background in PLC programming, SCADA systems, industrial robotics, control panel design, panel building, component selection, and building automation systems (BAS) . This role requires technical expertise, project management skills, and leadership capabilities to drive automation initiatives efficiently. Key Responsibilities: Lead the design, development, and execution of automation and control systems for industrial and building automation applications . Develop and program PLC, SCADA, HMI, and DCS solutions for automation projects. Oversee the integration of robotic systems, vision systems, control panels, and BAS . Select and design electrical, electronic, and mechanical components for automation systems, ensuring compatibility and optimal performance. Design and supervise panel building , including wiring, layout, and compliance with electrical standards. Implement and manage Building Automation Systems (BAS), HVAC controls, energy management, and smart building solutions . Ensure compliance with industry standards, safety regulations, and best practices . Collaborate with cross-functional teams, including mechanical, electrical, and software engineers , to optimize automation processes. Troubleshoot and resolve technical issues related to automation, control, and building management systems (BMS) . Manage multiple projects, ensuring timely completion within budget constraints. Conduct risk assessments and preventive maintenance for automation systems. Provide training and technical support to operations and maintenance teams. Stay updated on emerging technologies and industry trends to drive innovation in industrial and building automation . Required Skills & Qualifications: Bachelor’s/Master’s degree in Electrical, Electronics, Mechatronics, Instrumentation, Automation Engineering, or a related field. 8 to 15 years of experience in industrial automation, control systems, and building automation . Strong knowledge of PLC (Siemens, Allen-Bradley, Schneider, Mitsubishi, etc.), SCADA, HMI, DCS, and industrial networking protocols (Modbus, Profibus, Ethernet/IP, BACnet, KNX, etc.) . Experience in robotic automation, motion control, and vision systems . Expertise in control panel design, panel building, wiring, and troubleshooting . Strong understanding of component selection, electrical hardware design, and sensor integration . Experience with Building Automation Systems (BAS), BMS, HVAC controls, and energy management systems . Knowledge of PID tuning, VFDs, servo control systems, and industrial actuators . Understanding of Industry 4.0, IIoT, smart buildings, and digital transformation initiatives . Excellent communication, problem-solving, and leadership skills. Preferred Experience: Experience in Special Purpose Machines (SPM) , material handling systems, and production automation. Knowledge of industrial and building safety standards, risk assessments, and machine safety (SIL, CE, etc.) . Previous experience in managing a team of engineers and technicians . Job Type: Full-time Pay: ₹35,000.00 - ₹40,000.00 per month Benefits: Food provided Schedule: Day shift Supplemental Pay: Performance bonus Yearly bonus Work Location: In person

Why Choose Kritilabs? Collaborative Culture : Join a team of diverse professionals who collaborate, inspire, and support each other in achieving common goals. Opportunities for Growth : We are committed to helping our employees grow both personally and professionally through training, mentorship programs, and career development initiatives. Innovative Projects : Work on cutting-edge projects and initiatives that challenge conventional thinking and push the boundaries of innovation. Work-Life Balance : We understand the importance of maintaining a healthy work-life balance and offer flexible work arrangements to accommodate our employees' needs. Competitive Benefits : Enjoy a comprehensive benefits package including health insurance, retirement plans, paid time off, and more. Careers At KritiLabs, we believe in fostering a dynamic, innovative, and inclusive work environment where every individual's contributions are valued and celebrated. We're always on the lookout for talented individuals who are passionate about making a difference and driving positive change in their fields. Customer Support - CSE45748 Electronics Engineers with good knowledge of engineering concepts and who need to provide online support for device maintenance and replacements at the various operational locations. Requirements Good knowledge in electronics engineering concepts (BE or Diploma in Electronics/EEE/Mechatronics only). 1 to 2 years experience. Excellent communication in English and Hindi (and any other language ie. Malayalam, Telugu, Kannada). Experience in working with teams will be an added advantage. Ability to learn and train operations team members based on good knowledge of product and solutions. LOCATION: CHENNAI & DELHI QUALIFICATION: 1 to 2 years Experience, GRADUATION

Job Title: Control & Automation Engineer Location: [Insert Location] Job Type: Full-Time Salary: 25K – 30K Job Summary: We are looking for a skilled and motivated Control & Automation Engineer to support the design, programming, and implementation of automation solutions across industrial and building automation systems. The ideal candidate will bring strong technical expertise in PLC programming, SCADA/HMI development, control panel design, component selection, and Building Automation Systems (BAS). This role involves hands-on engineering work, system integration, and collaboration with multidisciplinary teams to deliver efficient and reliable automation solutions. Key Responsibilities: Develop and implement automation and control systems for industrial and building automation applications. Program and configure PLCs, SCADA, HMI, and DCS systems. Assist in the integration of robotics, vision systems, and smart devices into automation solutions. Design and select electrical/electronic components and prepare control system documentation. Participate in control panel design, layout, and oversee panel building and wiring to meet safety and compliance standards. Support the installation and commissioning of Building Automation Systems (BAS), including HVAC controls and energy management systems. Ensure systems adhere to safety standards, industry codes, and project requirements. Troubleshoot and resolve issues related to control systems and building management systems (BMS). Collaborate with other engineers and departments to ensure system compatibility and performance. Conduct testing, validation, and documentation of control systems. Provide technical support, maintenance planning, and training to relevant teams. Stay current with emerging technologies and industry trends related to automation and smart systems. Required Skills & Qualifications: Bachelor’s degree in Electrical, Electronics, Mechatronics, Instrumentation, Automation Engineering, or related field. 5 to 10 years of experience in industrial automation, control systems, or building automation. Proficiency in PLC programming (e.g., Siemens, Allen-Bradley, Schneider, Mitsubishi), SCADA, HMI, and industrial communication protocols (e.g., Modbus, Profibus, Ethernet/IP, BACnet, KNX). Experience in control panel design, component selection, wiring, and troubleshooting. Familiarity with robotic systems, motion control, and vision systems is a plus. Understanding of Building Automation Systems (BAS), BMS, HVAC control, and energy efficiency strategies. Knowledge of VFDs, servo drives, sensor integration, and PID control. Awareness of Industry 4.0, IIoT, and smart building technologies. Strong problem-solving abilities and clear communication skills. Preferred Experience: Experience in Special Purpose Machines (SPM), production automation, or material handling systems. Knowledge of safety standards, CE marking, risk assessments, and functional safety (e.g., SIL). Ability to work independently and within a multidisciplinary engineering team. Job Type: Full-time Pay: ₹25,000.00 - ₹30,000.00 per month Benefits: Food provided Schedule: Day shift Supplemental Pay: Performance bonus Yearly bonus Work Location: In person

Company Description At Konecranes, we believe that great customer experience is built on the people behind the Konecranes name. Everything we do, we do with passion and drive. We believe diversity drives business success and is the foundation for our growth. We welcome different backgrounds and skills that enrich our community and we promote a place where we can ALL be ourselves. This is what makes Konecranes a unique place to work. Job Description We are looking out for enthusiastic and dynamic team player who is willing to contribute his skills in Electrical Designing with Zuken E3 or Eplan, Schematics, AutoCAD / Autodesk Inventor , having exposure to Global Project and grow along with the team. An energetic team player who is having an opportunity to explore and develop self-skill under the guidance of professional team. Study and understand the project specifications as well as details of project. Preparation of Panel layout, SLDs, Schematics, BOM & Cable Lists as per requirement of the Project. To plan his own activity within the project to reach desired targets, with good quality. Continuously work on improvement of the quality of drawings & maintain the quality requirement of the customer. To keep proper and effective communication between team members. To follow company policy / rules. Should have valid passport & ready to travel to the customer site abroad. The role is based in our office in SP Infocity, Pune – but it goes without saying that the remote & hybrid working is a part of our modern ways of working. To achieve these goals, You need to have Bachelor’s degree in Electrical / Electronic / Mechatronics Engineering from reputed university. Sound knowledge of Zuken E3, Team Center / SAP with Min. 2 to 4 years of design experience in field of Port cranes or heavy machineries. We expect you to have good interpersonal skills. Sound knowledge of basics of Engineering Sound understanding of Preparation of Electrical drawings with Panel layout, SLD, Schematics, Bill of Material & Cable List. Good understanding in Cable & LV Switchgear selection. Hands on experience of AutoCAD / inventor will be addon. Experience in Lighting calculation using Dialux preferred. Ability to work in team Prior experience in Port cranes or any cranes is preferable. Qualifications Bachelor’s degree in Electrical / Electronic / Mechatronics Engineering from reputed university. Additional Information What We Offer As an Electrical Design Engineer – Port Solutions Electrics, you get to join our team and make your mark in our journey forward. You will be working as an Individual Contributor contributing to our team in a very ambitious and growth-orientated culture. You will be working closely with in a cross-functional environment and, based on your performance, you may be given the opportunity to take ownership of a product group. With increased responsibility and contribution, there may also be opportunities for international exposure and short-term travel, depending on project requirements and your involvement. The role offers a strong platform for professional growth, global collaboration, and continuous skill enhancement in an innovation-driven setup. As we trust in Winning Together, we offer continuous learning and development which means that you will also get equal opportunities for self-development as a leader. Driving for better we offer a flexible & inclusive work environment where you can be yourself and enjoy Work-Life balance. We believe Doing the right thing by offering Competitive Salary. Want to learn more about Konecranes and what your future colleagues have to say? Interested? Do you have what it takes, and do you see yourself joining our community and taking a key role in our Electrical Design Engineer – Port Solutions Electrics? If yes, please submit your application with CV as soon as possible, latest by 06.06.2025 via Apply link below. Please contact the recruiting manager Girish Kulkarni via email girish.kulkarni (at) konecranes.com, or Global Talent Acquisition Specialist Kanchan Mahajan via kanchan.mahajan (at) konecranes.com or via Linkedin Konecranes moves what matters . We are a global leader in material handling solutions, serving a broad range of customers across multiple industries. We consistently set the industry benchmark, from everyday improvements to the breakthroughs at moments that matter most, because we know we can always find a safer, more productive and sustainable way. That's why, with 16 000+ professionals in over 50 countries, we are trusted every day to lift, handle and move what the world needs. Konecranes is committed to ensuring that all employees and job applicants are treated fairly in an environment which is free from any form of discrimination. Show more Show less

Company Description Sree Sakthi Group of Companies is a renowned organisation based in Coimbatore, India, specialising in turnkey projects for foundries and Foundry Automation. With over 30 years of experience, we have become a trusted name in the foundry business, serving a wide client base. Our success is attributed to our dedicated and dynamic team, who work together to create the best customer experiences. We value passion, courage, and original thinking, and encourage our employees to contribute their ideas and make a difference. Role Description – Robotics Engineer As a Robotics Engineer in an SPM (Special Purpose Machines) environment, you will be responsible for designing, developing, integrating, and maintaining robotic systems tailored for customised industrial automation solutions. Your focus will be on improving machine efficiency, precision, and functionality through robotic integration. This role requires a deep understanding of robotics, automation controls, motion systems, sensors, and software development for mechatronic systems. You will work closely with mechanical, electrical, and software engineers to deliver turnkey automation solutions across various industries such as automotive, electronics, pharmaceuticals, and packaging. Job Responsibilities Design & Development Design robotic solutions integrated into custom SPMs for automated manufacturing, assembly, or inspection processes. Develop robotic cell layouts, end effectors, and peripheral equipment. Select suitable robots (e.g., SCARA, articulated, Cartesian) based on application requirements. Programming & Integration Program industrial robots (e.g., FANUC, ABB, KUKA, Yaskawa) for tasks such as pick-and-place, welding, vision-guided operations, etc. Integrate robots with PLCs, HMIs, sensors, and vision systems. Calibrate and teach robot positions and optimize motion sequences. Testing & Commissioning Lead FAT (Factory Acceptance Test) and SAT (Site Acceptance Test) for robotic systems. Troubleshoot and resolve issues related to robot motion, communication, and synchronization with other systems. Ensure safety compliance of robotic systems per applicable standards (ISO, CE, etc.). Project Execution Collaborate with cross-functional teams (mechanical, controls, software) to deliver projects on time and within scope. Assist in preparing project documentation, including robot specs, operation manuals, and risk assessments. Provide technical support during installation and post-deployment phases. R&D and Innovation Stay updated with emerging trends in robotics, machine vision, AI in automation, and smart manufacturing. Propose and develop innovative solutions for enhanced automation and machine flexibility. Required Skills & Qualifications Bachelor’s or Master’s degree in Robotics, Mechatronics, Mechanical, or Electrical Engineering. Hands-on experience with industrial robots and automation platforms. Strong knowledge of kinematics, path planning, and control systems. Proficiency in robot programming environments and simulation tools. Experience with vision systems (e.g., Cognex, Keyence) is a plus. Strong problem-solving and project management skills. Compensation and Benefits Competitive salary with performance-based incentives. Health insurance, travel allowances, and other benefits. Opportunities for professional development and career growth. Company Culture and Values At Sree Sakthi Group of Companies, we foster a collaborative and inclusive work environment where innovation and integrity are at the core of everything we do. We value our employees and invest in their growth and development. Application Process Interested candidates are invited to submit their resumes and a cover letter outlining their relevant experience and why they are a good fit for this role. Applications and questions about the position can also be sent to hr@sreesakthiindia.com . Show more Show less

Technical Sales Engineer Location: Tuticorin / Tirunelveli About Kumari Engineering Enterprises: Kumari Engineering Enterprises is a leading provider of integrated industrial solutions in the electrical, electronics, and automation domains. With a strong commitment to quality and customer satisfaction, we partner with global leaders to bring cutting-edge technology to our clients. We are proud to be an authorized Integrated Solutions Provider for Lauritz Knudsen (LK) Electrical & Automation, a brand synonymous with reliability and innovation in industrial switchgear, control gear, and automation products. The Opportunity: We are seeking a dynamic and results-oriented Technical Sales Engineer to join our growing team. This pivotal role will be instrumental in expanding our market presence for Lauritz Knudsen Electrical & Automation products and solutions. You will be the technical and commercial face of Kumari Engineering Enterprises for LK, engaging with clients across various industries, understanding their needs, and providing comprehensive, tailor-made solutions. Key Responsibilities: Business Development & Sales: Identify and cultivate new business opportunities for Lauritz Knudsen products (e.g., LV switchgear, control gear, industrial automation components, PLCs, VFDs, HMIs, sensors, etc.) within existing and new customer segments. Develop and execute strategic sales plans to penetrate new markets and expand our customer base. Maintain a robust sales pipeline and provide accurate sales forecasts. Technical Solutioning & Consultation: Conduct thorough customer needs analysis and provide expert pre-sales technical consultation for LK solutions. Prepare and deliver compelling technical presentations and product demonstrations to prospective clients. Collaborate with customers to design optimal electrical and automation solutions tailored to their specific applications and challenges. Proposal & Negotiation: Prepare detailed technical and commercial proposals, quotations, and tenders. Negotiate contracts, terms, and conditions to secure orders and ensure customer satisfaction. Customer Relationship Management: Build and maintain strong, long-lasting relationships with key customers, consultants, contractors, and channel partners. Act as the primary point of contact for all technical and commercial inquiries related to LK products. Market Intelligence: Stay updated with industry trends, competitor activities, and new product developments in the industrial electrical and automation space. Provide market feedback to the management team for strategic planning. Post-Sales Support & Coordination: Coordinate with internal teams (e.g., operations, service) to ensure seamless project execution, delivery, and post-sales support where required. Address any technical queries or issues that may arise post-sales. Qualifications & Skills: Education: Bachelor's degree (B.E./B.Tech) in Electrical Engineering, Electronics & Communication Engineering, Instrumentation & Control Engineering, or Mechatronics Engineering. Experience: 3-5 years of proven experience in technical sales of industrial electrical, electronics, and automation products (e.g., PLCs, VFDs, HMIs, switchgear, control panels, sensors, industrial networking). Prior experience in selling Lauritz Knudsen (LK) products or similar brands (e.g., Siemens, Rockwell, Schneider Electric, ABB, L&T, Eaton) is highly advantageous. Experience in panel building or systems integration is a plus. Technical Acumen: Strong theoretical and practical knowledge of industrial automation concepts, control systems, electrical distribution, and motor control. Familiarity with PLC programming basics, SCADA systems, and industrial communication protocols. Ability to understand technical drawings and schematics. Sales & Communication Skills: Excellent verbal and written communication skills in English and Tamil is essential. Strong presentation, negotiation, and closing skills. Ability to build rapport and trust with diverse customer profiles. Personal Attributes: Self-motivated, results-oriented, and target-driven. Proactive problem-solver with a strong customer-centric approach. Ability to work independently and as part of a team. Willingness to travel frequently (approx. 50-70%) within Tamil Nadu and neighboring regions. Driving: Valid two-wheeler and/or four-wheeler driving license. Why Join Kumari Engineering Enterprises? Be a part of a reputable company with a strong legacy in the industrial solutions sector. Work with a globally recognized brand, Lauritz Knudsen Electrical & Automation. Opportunity for professional growth and development. Competitive salary with attractive sales incentives and benefits. A collaborative and supportive work environment. If you are a technically proficient sales professional passionate about industrial automation and eager to drive growth, we encourage you to apply! Job Type: Full-time Pay: ₹18,000.00 - ₹22,000.00 per month Schedule: Day shift Willingness to travel: 25% (Required) Work Location: In person Expected Start Date: 21/06/2025

Schaeffler is a dynamic global technology company and its success has been a result of its entrepreneurial spirit and long history of private ownership. Does that sound interesting to you? As a partner to all of the major automobile manufacturers, as well as key players in the aerospace and industrial sectors, we offer you many development opportunities. Your Key Responsibilities Responsible for supplier component development program which includes, technical review with supplier, Feasibility review & maturity evaluation. Finalization of technical review and feasibility review with all potential suppliers as per project requirement. Preparation of SQM decision based on technical review with supplier to finalize the supplier nomination. Monitoring the APQP review with supplier to develop the components within project time plan. PPAP & Run@Rate performance at supplier manufacturing location. Capacity evaluation during the Run@Rate Review the PPAP and release the PSW to supplier Review the PPAP and release the PSW to supplier Experience in releases of critical assly line and testing equipment's like Leakage testing, flow testing Able to work with Global team Work with Engineering (Design and Manufacturing Engineers) team to define process parameters and criteria to ensure supplier process capability is effective to meet product and process requirements Manage the risk assessment & escalations Perform root cause analysis and resolve problems through 8D approach Category – Machining, Turning, Casting, Functional Plastic & Mechatronics VDA 6.3 Auditor Your Qualifications B.E.Mechanical Experience – 10 to 13 Years As a global company with employees around the world, it is important to us that we treat each other with respect and value all ideas and perspectives. By appreciating our differences, we inspire creativity and drive innovation. In this way, we contribute to sustainable value creation for our stakeholders and society as a whole. Together, we advance how the world moves. Exciting assignments and outstanding development opportunities await you because we impact the future with innovation. We look forward to your application. www.schaeffler.com/careers Your Contact Vitesco Technologies India Pvt. Ltd. Hemanth Hurudi Show more Show less

Requisition ID: 67611 About Whirlpool Corporation Whirlpool Corporation (NYSE: WHR) is a leading kitchen and laundry appliance company, in constant pursuit of improving life at home and inspiring generations with our brands. The company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including Whirlpool, KitchenAid, JennAir, Maytag, Amana, Brastemp, Consul, and InSinkErator. In 2023, the company reported approximately $19 billion in annual sales, 59,000 employees, and 55 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com. The team you will be a part of The Engineering team discovers, develops and evaluates new product ideas, enhancements, or strategic product extensions, and translates research discoveries into usable and marketable products. Leads, plans and tracks all phases of the product life cycle, from inception to introduction into the marketplace. Coordinates with various functions to ensure successful product development and implementation. This Role In Summary The position is responsible for design and development of component(s)/module by preparing concepts in Mechanical Structures, thermal, hydraulics , combustion and mechatronics. Builds on organizational/process knowledge, understands business needs. Solves simple problems, analyzes and provides solutions/ alternatives. Moderate guidance and direction needed. Essential Duties And Responsibilities Responsible to generate and review engineering design concepts at module/component level and aimed at improving performance, increasing quality and/ or optimizing cost. Drive engineering calculations as required supporting Design integrity. Evaluate, recommend the developed concepts in terms of engineering, manufacturing and suggest best concept, priority of selection, and other trade-off if necessary. Coordinate and effectively communicate the Design Concepts with different stakeholders during Project/ Design Reviews Responsible to understand project requirements/physics of problem/ Design requirements. Responsible to convert Consumer Requirements into less complex Technical problem and perform component level designs independently with help from SME’s Apply DFx( DFA,DFM,DFR,DFS,DFSS) methodologies in Design in consultation with SME’s Responsible to select materials for the functional requirements. Making samples or working models by hand or using computerized prototyping equipment. Responsible for DVP line item for component/module level Create Model Shop / Lab requests /SBD requests and support in Virtual/ Physical build as applicable Drive /Support /Contribute projects using product development process Responsible for Product Structure Management at component / module level. Generate ideas using various VA/VE tools like teardowns to continuously build LOS for future projects. Analyze SIR and BOM data to calculate the feasibility of design concepts and solutions Contributes and supports product benchmarking. Your Responsibilities Will Include EDUCATIONAL QUALIFICATIONS- B.Tech/ BE Mech , ME / MTECH EXPERIENCE- 4 To 6 Key Deliverables Perform/Support/Contribute DFMEA, Tolerance stack up analysis and other preventive action steps during product design and development. Engineering Concept Designs for plastic and Sheet Metal parts DFMEAs Value engineering ideas Tolerance Stack Analysis DFX tool usage for driving engineering solutions TECHNICAL Understanding of Appliance/automotive manufacturing / assembly methods Basic knowledge in engineering principles Basic awareness and understanding on materials Selection Knowledge of GD&T Variation Analysis Problem Solving Failure Mode & Effect Analysis (FMEA) Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers. Additional information about the company can be found on Facebook, Twitter, LinkedIn, Instagram and YouTube. At Whirlpool Corporation, we value and celebrate diversity. Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law. Show more Show less

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport and infrastructure solutions for the future? If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. Key Responsibilities Develop test specifications and verification plans based on defined scope and input requirements. Collaborate with system design and development teams to ensure test alignment with product goals. Incorporate design risk analyses (e.g., FMEA, dependability studies) into test planning. Perform system and subsystem-level testing; analyze results to verify software quality within CI/CD pipelines. Estimate workload for both test development and execution phases. Create, update, and maintain test scope, specifications, test cases, and required Function Variants (FVs). Develop automation scripts to support efficient test execution. Ensure the accuracy and completeness of all test artifacts—including test cases, FVs, and automated tests—across all loops. Validate full coverage of requirements, variants, and changes (e.g., CRs/ChOs) within the test scope. Own and manage FVs and FV groups within the assigned test area. Deliver finalized test scope on time, aligned with execution schedules and EE processes. Plan and manage test execution, including mapping FVs and test cases to appropriate test objects and systems. Conduct test execution, log results, and perform root cause analysis for failures. Provide regular status updates, including defect (PR) reporting, and raise issues related to test cases or environments. Generate and submit final test reports; coordinate reviews with inspection leaders. Contribute to continuous improvement by updating the Lessons Learned database. Competences Bachelors Degreen in Electrical/Electronics/Mechatronics Engineering or equivalent. Minimum of 7 years of experience in Verification and Validation within the Automotive domain. Strong domain expertise in Test & Verification processes specific to Automotive systems. Solid understanding of Electrical and Electronic (EE) systems and functions. Relevant experience and knowledge in truck applications. At least 5 years of documented experience in software development or verification related to: Vehicle dynamics Vehicle motion control Driver assistance systems Automated driving features Minimum of 5 years of documented experience working with Hardware-in-the-Loop (HiL), Software-in-the-Loop (SiL), or Model-in-the-Loop (MiL) environments—either as a developer or as a user. At least 2 years of documented experience in vehicle-level verification activities. Minimum of 1 year of experience in developing and validating models using simulation tools such as Simulink (preferred). Exposure to dSPACE tools for verification is an advantage. Ready for the next move? Are you excited to bring your skills and disruptive ideas to the table? We can’t wait to hear from you. Apply today! We value your data privacy and therefore do not accept applications via mail. Who We Are And What We Believe In Our focus on Inclusion, Diversity, and Equity allows each of us the opportunity to bring our full authentic self to work and thrive by providing a safe and supportive environment, free of harassment and discrimination. We are committed to removing the barriers to entry, which is why we ask that even if you feel you may not meet every qualification on the job description, please apply and let us decide. Applying to this job offers you the opportunity to join Volvo Group . Every day, across the globe, our trucks, buses, engines, construction equipment, financial services, and solutions make modern life possible. We are almost 100,000 people empowered to shape the future landscape of efficient, safe and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents with sharp minds and passion across the group’s leading brands and entities. Group Trucks Technology are seeking talents to help design sustainable transportation solutions for the future. As part of our team, you’ll help us by engineering exciting next-gen technologies and contribute to projects that determine new, sustainable solutions. Bring your love of developing systems, working collaboratively, and your advanced skills to a place where you can make an impact. Join our design shift that leaves society in good shape for the next generation. Show more Show less

Job Title: Drone Technician – Intern Location: On-site (Field presence required during testing) Company: Mavdrones Internship Duration: 3 months About Mavdrones: Mavdrones is a pioneer in drone innovation, offering advanced UAV solutions across sectors like agriculture, surveillance, inspection, and aerial mapping. We're on a mission to redefine the future of drone technology in India and beyond. Role Overview: We are looking for a motivated Drone Technician Intern with hands-on experience or a strong understanding of Arduino and Raspberry Pi. This role is ideal for someone passionate about drone systems, embedded electronics, and real-world field testing. You will be a vital part of our R&D and testing teams, assisting in drone assembly, diagnostics, and performance trials. Key Responsibilities: Assist in the assembly, configuration, and troubleshooting of drone hardware. Work with embedded systems, especially Arduino and Raspberry Pi platforms. Support field teams during on-site testing and trials – your presence is mandatory during these phases. Assist with wiring, soldering, and integrating sensors and modules. Conduct basic diagnostics and repairs under supervision. Document test results, issues, and resolutions in a clear and organized manner. Requirements: Basic to intermediate experience with Arduino and Raspberry Pi. Understanding of electronic components, circuit diagrams, and basic IoT concepts. Willingness to work on-site during drone testing. Enthusiastic learner with the ability to follow instructions and work in a team. Prior experience with UAVs, drones, or relevant college projects will be an advantage. Preferred Qualifications: Pursuing or completed diploma/degree in Electronics, Mechatronics, Robotics, or related fields. Familiarity with drone flight controllers, sensors, and telemetry systems. Experience with CAD software or PCB designing is a plus. What You’ll Gain: Real-world exposure to advanced drone technology. Practical learning in embedded systems, UAV configuration, and drone deployment. Mentorship from industry professionals and opportunity to grow into a full-time role. Ready to launch your drone tech career with us? Send your resume and a brief note about your experience/projects to careers@mavdrones.com Show more Show less

Job Description Job Role: Technical Support Engineer - Fresher Location: Khopat, Thane, Maharashtra, 400601 Reporting To: General Manager About Us: Founded in 2009, Vision Mechatronics is an innovative Indian enterprise specializing in robotics, renewable energy, and lithium-ion energy storage solutions. Our groundbreaking products, including the "World's Smartest Lithium Battery," are revolutionizing energy systems across residential, industrial, commercial, and electric vehicle markets. We are seeking a customer-centric professional to deliver top-tier service, manage inquiries, and enhance overall customer experience. Key Responsibilities: - Customer Engagement: Serve as the main point of contact for customers, ensuring outstanding service delivery. - Inquiry and Issue Management: Address customer inquiries, handle complaints, and escalate issues when necessary. - Product Expertise: Keep abreast of our products, services, and industry trends to provide accurate information. - Customer Experience Enhancement: Suggest and implement improvements to enhance customer satisfaction. - Technical Assistance: Support customers with product setup, troubleshooting, order processing, and returns. - Data Management: Maintain precise and up-to-date customer information in our database. - Post-Sale Follow-Up: Reach out to customers after purchases to gauge satisfaction and gather feedback. - Reporting: Create reports on customer satisfaction levels and ongoing improvement initiatives. - Training & Development: Assist in training new customer service team members if required. - Team Collaboration: Actively participate in team meetings and contribute to continuous improvement efforts. Qualifications & Skills Education: Diploma/ degree in Electrical/ Electronics field preferred Experience: Experience in customer service or a related field. Skills: Excellent communication, problem-solving, and multitasking skills. Technical Proficiency: Proficiency in customer service software and Microsoft Office. Mindset: Strong organizational skills and a customer-centric mindset. Preferred Qualifications Industry Experience: Industry-related customer service experience. Software Knowledge: Knowledge of ticketing systems. Language Skills: Bilingual abilities are a plus. What We Offer: - Comprehensive training programs and mentorship from experienced professionals - Opportunities for career advancement and skill enhancement - A collaborative, innovative work environment - Exposure to advanced technologies and industry standards If you're eager to start your career in electrical and electronics engineering and grow with a forward-thinking organization, we want to hear from you! To apply, send your resume to careers@vmechatronics.com or visit our careers page for more information. Join Vision Mechatronics and be part of shaping the future of automation and electronics! Job Types: Full-time, Permanent Pay: ₹300,000.00 - ₹500,000.00 per year Benefits: Health insurance Shift: Day shift Work Location: In person

Job Title: Robotics Engineer - ROS2 Development Job Overview : We are seeking a highly skilled and motivated Robotics Engineers with a strong focus on ROS2 development to join our dynamic team. As a Robotics Engineer, you will be responsible for designing, developing, and implementing advanced robotic systems and applications using the Robot Operating System 2 (ROS2). You need to develop the behavioral and control systems, including planning and navigation needed for autonomous robots. This role requires a deep understanding of robotic software architecture, proficiency in ROS2, and experience with hardware integration and real-time systems and expertise in URDF (Unified Robot Description Format). Key Responsibilities : Design and Development : Develop robust and scalable robotic applications using ROS2. Implement software for various robotic systems, ensuring high performance and reliability. Hand-on with developing ROS2 nodes, Services/Clients, Publishers/Subscriber. Lead and develop path/motion planning algorithms that include route planning, trajectory optimization, decision making, and open space planning. Good understandings of Robot dynamics, kinematics and modeling. System Integration : Integrate sensors, actuators, and other hardware components with robotic systems. Ensure seamless communication between hardware and software layers. Experienced on integration with perception sensors such as IMU, GPS, Stereo Cameras, Lidar, Radar, and various other sensors. URDF Modeling : Create and maintain accurate URDF models for robotic systems. Ensure models accurately represent the physical configuration and kinematics of the robots. Algorithm Implementation : Implement and optimize algorithms for perception, localization, mapping, navigation, and control. Simulation and Testing : Utilize simulation tools to test and validate robotic systems in virtual environments like Gazebo, Rviz2 and Unity. Perform rigorous testing in real-world scenarios to ensure system robustness. Documentation : Create and maintain comprehensive documentation for system architecture, design decisions, algorithms, and user guides. Research and Development : Stay updated with the latest advancements in robotics and ROS2, and URDF. Contribute to the continuous improvement of development processes and tools. Education Background: B.Tech (Mechatronics, Robotics , Mechanical, Electrical) Show more Show less