2612 Mechanical Jobs - Page 41

Job Title Data Center Plumber Role Summary Install, inspect, repair, and maintain plumbing systems critical to data center infrastructure supporting cooling loops, condensate management, fire suppression, and domestic water systems while ensuring high standards of reliability, safety, and compliance. Key Responsibilities System Installation & Commissioning Assemble, install, and align piping systems hydronic, condensate, and fire suppression using soldering, brazing, welding, clamp, solvent, and mechanical connections as per blueprints and plumbing codes. Pressure-test pipes using air or water to locate leaks and ensure integrity . Maintenance & Repairs Conduct preventive and corrective maintenance of pipelines, valves, condensate drains, pumps, strainers, heat exchangers, and safety systems (e.g. eyewash stations) . Handle plumbing emergencies, such as clogged drains or pipe failures, to minimize risk to IT infrastructure. Cooling & Hydronics Support Maintain hydronic rack-cooling, chilled-water loops, cooling towers, condensate systems, and associated pumps. Manage condensate removal and water-based cooling systems to prevent flooding and support HVAC operations. Documentation & Coordination Read and interpret technical drawings, P&IDs, and blueprints; prepare material estimates and order requisitions. Log service reports, part usage, inventory, and maintenance actions using CMMS or similar tools. Compliance & Safety Ensure plumbing work meets local and international codes and standards; perform hazard assessments and follow LOTO, PPE, and site safety protocols. Protect against condensation, leaks, and electrical hazards near sensitive IT systems. Qualifications & Experience Minimum 2-5 years in industrial/commercial plumbing or HVAC support, preferably within data center or critical facilities . Valid plumbing license or certification (e.g., journeyman or equivalent trade qualification) resources. Proficiency in pipe bending, threading, soldering/brazing, welding, and mechanical joining methods. Strong ability to read blueprints, diagrams, P&IDs, and building codes. Experience with hydronic systems, cooling towers, chilled-water/hot-water loops, and condensate systems. Physical capability to lift up to 60 lbs, work in varying temperature environments, and climb ladders or navigate confined spaces.

Analyse the technical complaints of the vehicle in the field.Rectify defects in vehicles / overhaul aggregates.Maintain and handle internet based warranty.Ensure implementation of service processes at channel partners.Development of secondary channel.Feed back on companys as well as competitors products.Training of service managers.Work out special service support for strategic customers with channel partners.Ensure execution of spare parts order by all channel partners for sufficient inventory and for meeting spare parts target.Secondary network for spare parts sales.Guide channel partners for manpower/facilities/equipment optimisation.Ensure profitability of workshops of channel partners.MIS on service.Spare parts inventory management.Manging service gaurantee at the dealership.Monthly visit to ASC and monitor his performance along with ASC coordinator.Service camps on monthly basisc.Monthly visits to customer and update M Response data Preferred Industries Education Qualification Diploma in Engineering; Bachelor of Engineering; Diploma in Engineering in Mechanical General Experience 5 years and above Critical Experience System Generated Core Skills Customer Sensitivity Service Orientation Service Management System Generated Secondary Skills Consumer Focus Dealer Relationship Management Service Planning

Job Responsibilities: Understanding customer specifications, requirements and preparing project scope clearly highlighting deliverables. Liaise with engineering, product line, manufacturing, and supply chain in reviewing manufacturing documents, procedures, material test certificates and other documents per customer specifications and requirements. Perform tasks such as reviewing engineering drawings, documentation, prototype and production testing, vendor management, and quality management. Interact with clients and vendors independently as needed to provide product technical support. Identify any opportunities for improvement (OFI) regarding design, planning and manufacturing processes. Preparation of engineering design files, test reports and investigation reports. Work independently as well as part of a project team, managing multiple tasks and working on multiple projects simultaneously to meet challenging deadlines. Review Nonconformance Reports, field incidents and assist in providing disposition. Understand Weatherford Policies and comply with all requirements of the Quality Systems Manual, Safety rules, Operating and Technical Procedures and Workplace Instructions. Provide continued support for projects after completion and field commissioning in the form of troubleshooting either remotely, or in person onsite when required. Required Skills: B.Tech/B.E in Mechanical Engineering from an accredited college/university. Minimum 6 to 9 years of proven experience working in complex engineering projects, project management, mechanical engineering design, instrumentation engineering. Experience working with customers like Exxon, Shell, NOC, KOC, ADNOC, Total, National Oil Companies etc. Proficient in Industry standards such as ASME B31.3, API, ASME BPVC, IOGP, NACE etc. Proficiently use MS Office Suite to develop presentations, correspondence, reports, and schedules (Projects Gantt Chart, Word, Excel, Power Point, etc.). Demonstrate clear written and verbal communication skills and ability to promptly give and follow directions when working with others. Preferred Skills: 3+ years of hands-on experience in handling projects from conceptual stage to project closure including but not limited to RFQ, design, manufacturing, testing, inspection, etc. Experience working with equipments/instruments/systems used in the Oil and Gas industry. Working knowledge of PTC Creo, DraftSight, AutoCAD, Windchill. Experience of working with cross functional teams spread across geographies.

Interview for BE / Diploma Civil Fresher Candidates for Dahej Chemical Company Contact Urvi Madam on 9712914207 & Visit Our Office Share with yr friends Golden opportunity to Start yr career We are Best Consultancy in Gujarat to provide Jobs . Required Candidate profile Join My LinkedIN: https://www.linkedin.com/in/urvisdp VISIT OUR BHARUCH OFFICE FOR CALL LETTER SDP HR SOLUTION 610,GOLDEN SQUARE OPP HOTEL REGENTA ABC CIRCLE BHARUCH We Provide Best Jobs in Gujarat

Key Responsibilities: Develop and implement effective sales and marketing strategies to increase market share. Identify and target new business opportunities in domestic and/or international markets. Maintain strong relationships with existing customers and dealers. Visit customers, construction sites, and distributors regularly for business development. Negotiate pricing, payment terms, and delivery schedules with clients. Achieve monthly, quarterly, and annual sales targets. Monitor competitor activities and market trends; provide actionable insights. Prepare regular sales reports, forecasts, and analysis for management. Coordinate with production and logistics departments to ensure timely delivery. Represent the company at trade shows, industry events, and client meetings. Qualifications: Bachelor's degree in Marketing, Business Administration, or Engineering (preferably Mechanical or Metallurgy). Minimum 25 years of experience in B2B/B2C sales in the steel or allied manufacturing industries. Strong understanding of steel products and their applications. Proficiency in MS Office, CRM software, and basic sales reporting tools. Excellent communication, negotiation, and interpersonal skills. Willingness to travel frequently for client meetings and business development. Preferred Attributes: Knowledge of local construction and infrastructure markets. Experience dealing with contractors, fabricators, EPC companies, and government agencies. Self-motivated, goal-oriented, and capable of working independently. Fluency in local language(s) plus English/Hindi. Intrested candidates can contact 7869830628

Diploma Apprentice Drive @ JSPMs Rajarshi Shahu College of Engineering by GE Aerospace Interview Date: Thursday, 3rd July 2025 Timing : 09:30 am Venue : JSPMs Rajarshi Shahu college of Engineering, Service road, Ashok Nagar, Tathwade, Pimpri-Chinchwad, Maharashtra Position : Apprentice Qualification : 1) Diploma in Mechanical / Automobile / Production / Electrical 2) Min 50% marks in SSC & Diploma (Aggregate) 3) Experience 0-1 years Eligibility : 2024 & 2025 Pass Outs Job Location : Pune Joining Time : Immediate Industry : Aviation Role : Apprentice Role Category : Apprentice

Ge Aerospace is Conducting Diploma Drive @ JSPMs Rajarshi Shahu College of Engineering Interview Date: Thursday, 3rd July 2025 Timing : 09:30 am Venue : JSPMs Rajarshi Shahu college of Engineering, Service road, Ashok Nagar, Tathwade, Pimpri-Chinchwad, Maharashtra Position : Apprentice Qualification : 1) Diploma in Mechanical / Automobile / Production / Electrical 2) Min 50% marks in SSC & Diploma (Aggregate) 3) Experience 0-1 years Eligibility : 2024 & 2025 Pass Outs Job Location : Pune Joining Time : Immediate Industry : Aviation Role : Apprentice Role Category : Apprentice

Diploma / Bachelor Degree in Electrical / Mechanical Engineering with 4 to 8 years of experience in Generator maintenance, repair & troubleshooting (Electrical & Mechanical). Perform routine maintenance of generator including cleaning & lubrication. Required Candidate profile Troubleshoot issues with generator performance. Company will provide Air Tickets + Visa + Accommodation + Food etc. Ready to work for minimum 2 Years. Job Location is only for DRC Congo - Africa. Perks and benefits Negotiable - Depending Upon Candidate & Experience

We are looking for Mechanical Engineers with minimum 6 months work experience, upto 2 years experience in the following departments. 1. Mechanical Design Engineer 2. Production - Mechanical 3. Quality Engineer - Mechanical 4. Machine Operator - Mechanical 5. Welder and Fitter If this interests you and you are looking for an opportunity in Mechanical Field, please do contact Aditya at 8904465205 or email at careers@rippllighting.com

Supervision, monitoring, and coordination with design consultant for MEP Work of Hospital project ensuring safe and efficient design, installation, and functioning of mechanical, electrical, and plumbing systems. Required Candidate profile BE/ B.Tech( Mechanical or Electrical) with 8 to 12 years experience in managing MEP work of a construction site

Experience in installation & commissioning of High side HVAC, Electrical, FF,PHE,FAS etc& allied services in 5 star Hotel as well as handover to operators. He should have knowledge of Auto cad. coordinate with contractors ,workers Ph 9454079468 Required Candidate profile He should possess good communication skills.get the work executed as per the drawings issued and able to resolve installation issues at site for all services.Candidate will have to joining immediately

Responsibilities: * Collaborate with production team on machine setup & troubleshooting * Maintain machinery according to schedule & safety standards * Ensure quality control through regular inspections Food allowance Health insurance Annual bonus Provident fund

Qualification/Specialization: B.E/Electrical Electronics Primary Skills : Automotive ECU Design experience with System level sub level knowledge on E/E Architecture Schematic. Concepts Selections for a given system feature and Analyzing customer or core product requirements and developing system design solutions to be further implemented by System, Hardware, Software, and Mechanical engineers. Defining the Cross Functional Spectifications using SAE J1939 ISO Specs Secondary Skills : Experience in national, region specific and global standards to support legislative and regulatory compliance. System FMEA, DFMEA and FMEDA, FTA Diagnostic Requirements Key Tools : DOORS, Polarion JAMA

Quality Assurance and Control: Develop and implement quality assurance and control procedures for mechanical systems and components used in the wind project. Conduct inspections and audits of mechanical installations, equipment, and systems to ensure compliance with design specifications, industry standards, and safety regulations. Monitor and review the performance of mechanical systems during construction and commissioning phases to identify and address any quality issues. Testing and Validation: Oversee and coordinate testing activities for mechanical systems, including functional tests, performance tests, and system validation. Review and analyze test results to ensure that mechanical systems meet project requirements and operational standards. Implement corrective actions for any identified defects or non-conformities in mechanical systems. Documentation and Reporting: Prepare and maintain comprehensive documentation related to quality assurance, including inspection reports, test results, and compliance records. Develop and present quality reports to project stakeholders, highlighting any issues, resolutions, and overall quality performance. Ensure proper documentation and tracking of quality-related activities and changes. Compliance and Standards: Ensure that all mechanical systems and components comply with relevant industry standards, regulations, and project specifications (eg, ASME, ISO, API). Stay updated with advancements in mechanical engineering standards and incorporate best practices into quality assurance processes. Collaboration and Communication: Work closely with project managers, mechanical engineers, and construction teams to address quality issues and ensure alignment with project goals. Communicate effectively with suppliers and contractors to ensure that mechanical components meet quality requirements and specifications. Provide training and support to project team members on quality assurance processes and standards. Continuous Improvement: Analyze quality performance data to identify trends, areas for improvement, and opportunities for process optimization. Implement and promote best practices and continuous improvement initiatives within the quality assurance process. Risk Management: Identify potential risks related to mechanical systems quality and develop strategies to mitigate these risks. Ensure that risk management processes are integrated into the quality assurance plan for mechanical systems. Qualifications: Education: bachelors degree in Mechanical Engineering or a related field. A masters degree or professional engineering license (PE) is a plus. Experience: Minimum of [7-10] years of experience in quality assurance or quality control for mechanical systems, preferably within wind energy or similar renewable energy sectors. Experience with quality management systems, inspection techniques, and testing methodologies for mechanical systems. Skills: Strong technical knowledge of mechanical systems, components, and industry standards. Proficiency in quality assurance tools and methodologies (eg, root cause analysis, failure mode effects analysis). Excellent problem-solving and analytical skills. Strong communication and interpersonal skills. Ability to work independently and manage multiple tasks in a dynamic environment. Preferred Attributes: Experience with large-scale wind turbine projects or similar renewable energy projects. Knowledge of specific quality standards and best practices related to wind energy. Certification in quality management (eg, Six Sigma, Quality Engineer) is advantageous. Working Conditions: Office-based with regular site visits to wind project locations for inspections and testing. Exposure to outdoor environments and varying weather conditions may be required during site visits. Some flexibility in work hours may be needed to accommodate project deadlines and testing schedules.

Independently must have handled and coordinated Category A and B type projects for above sectors. He / She shall be solely responsible to handle and prepare Prefeasibility Reports, EIA Reports, including baseline data generation and report preparation, verification / analysis of reports. Independently interact and coordinate with clients on technical aspects. Experience in EIA Legislations Processes, knowledge of environmental impacts of a proposed project or development. Proficiency in Microsoft Excel,Power-Point & Word. Job Responsibilities: Planning and attending Kick- off meetings Effective communication and coordination with internal team, empanelled experts and assisting team for preparation of EIA Report. Candidate is responsible for presentations at EAC / SEACs /SEIAA/ MoEFCC/MCZMA Meetings and Public Hearings Effective Planning, Communication, Solutions to the problems & difficulties for Execution of Projects. Excellent report writing and drafting skills. B.Tech Environmental Engineering /Environmental Planning B.E. Civil / Mechanical / Environmental / Chemical M.Tech Environmental Management / Environmental Science M.Sc Environmental Science/Chemistry or related field NABET Accredited EIA Coordinator/FAE in Sector 38/39/21(CatA/B) Minimum 3 years experience in Environment Consultancy Firm Should be we'll versed with all Notifications, OM s and Court orders and its applicability Should have handled violation cases. Salary: As Per Industry Standards. Qualifications : B.Tech Environmental Engineering /Environmental Planning/B.E. Civil / Mechanical / Environmental / Chemical/M.Tech Environmental Management / Environmental Science//M.Sc Environmental Science/Chemistry or related field

We are seeking a skilled and proactive Service Engineer to support our 2W Electric Vehicle (EV) service operations. The ideal candidate will be responsible for diagnosing and troubleshooting vehicle issues, managing warranty claims, visiting dealers for technical support, and coordinating field operations. The Service Engineer will play a critical role in ensuring high-quality service delivery and maintaining customer satisfaction across the dealer network. Conduct regular visits to dealers to provide technical assistance and resolve service-related issues Perform diagnostics on 2W EVs to identify mechanical, electrical, and software issues Manage and process warranty claims in coordination with dealers and service centers Ensure proper documentation and reporting of warranty issues and resolutions Conduct root cause analysis of failed components and liaise with the quality team for corrective actions Coordinate field service activities, ensuring timely support and resolution of issues at dealer locations Monitor service cases in the field, providing on-the-spot solutions when needed Work closely with regional service managers to ensure smooth service operations across the region Collaborate with dealers to manage customer escalations and ensure positive service experiences Key Requirements: Diploma or bachelors degree in Mechanical/Electrical Engineering or a related field 3-7 years of experience as a service engineer, preferably in the 2W or EV sector

We are seeking a skilled and proactive Service Engineer to support our 2W Electric Vehicle (EV) service operations. The ideal candidate will be responsible for diagnosing and troubleshooting vehicle issues, managing warranty claims, visiting dealers for technical support, and coordinating field operations. The Service Engineer will play a critical role in ensuring high-quality service delivery and maintaining customer satisfaction across the dealer network. Conduct regular visits to dealers to provide technical assistance and resolve service-related issues Perform diagnostics on 2W EVs to identify mechanical, electrical, and software issues Manage and process warranty claims in coordination with dealers and service centers Ensure proper documentation and reporting of warranty issues and resolutions Conduct root cause analysis of failed components and liaise with the quality team for corrective actions Coordinate field service activities, ensuring timely support and resolution of issues at dealer locations Monitor service cases in the field, providing on-the-spot solutions when needed Work closely with regional service managers to ensure smooth service operations across the region Collaborate with dealers to manage customer escalations and ensure positive service experiences Key Requirements: Diploma or bachelors degree in Mechanical/Electrical Engineering or a related field 3-7 years of experience as a service engineer, preferably in the 2W or EV sector

We are seeking a skilled and proactive Service Engineer to support our 2W Electric Vehicle (EV) service operations. The ideal candidate will be responsible for diagnosing and troubleshooting vehicle issues, managing warranty claims, visiting dealers for technical support, and coordinating field operations. The Service Engineer will play a critical role in ensuring high-quality service delivery and maintaining customer satisfaction across the dealer network. Conduct regular visits to dealers to provide technical assistance and resolve service-related issues Perform diagnostics on 2W EVs to identify mechanical, electrical, and software issues Manage and process warranty claims in coordination with dealers and service centers Ensure proper documentation and reporting of warranty issues and resolutions Conduct root cause analysis of failed components and liaise with the quality team for corrective actions Coordinate field service activities, ensuring timely support and resolution of issues at dealer locations Monitor service cases in the field, providing on-the-spot solutions when needed Work closely with regional service managers to ensure smooth service operations across the region Collaborate with dealers to manage customer escalations and ensure positive service experiences Key Requirements: Diploma or bachelors degree in Mechanical/Electrical Engineering or a related field 3-7 years of experience as a service engineer, preferably in the 2W or EV sector

We are seeking a skilled and proactive Service Engineer to support our 2W Electric Vehicle (EV) service operations. The ideal candidate will be responsible for diagnosing and troubleshooting vehicle issues, managing warranty claims, visiting dealers for technical support, and coordinating field operations. The Service Engineer will play a critical role in ensuring high-quality service delivery and maintaining customer satisfaction across the dealer network. Conduct regular visits to dealers to provide technical assistance and resolve service-related issues Perform diagnostics on 2W EVs to identify mechanical, electrical, and software issues Manage and process warranty claims in coordination with dealers and service centers Ensure proper documentation and reporting of warranty issues and resolutions Conduct root cause analysis of failed components and liaise with the quality team for corrective actions Coordinate field service activities, ensuring timely support and resolution of issues at dealer locations Monitor service cases in the field, providing on-the-spot solutions when needed Work closely with regional service managers to ensure smooth service operations across the region Collaborate with dealers to manage customer escalations and ensure positive service experiences Key Requirements: Diploma or bachelors degree in Mechanical/Electrical Engineering or a related field 3-7 years of experience as a service engineer, preferably in the 2W or EV sector

Mechanical Assembler - Pumps & Agitators (NOV-Energy Equipment- FMS division) About the Role: We are seeking a skilled and detail-oriented Mechanical Assembler to join our production team. The ideal candidate will have hands-on experience in assembling industrial pumps, agitators, or rotating equipment, with a strong understanding of mechanical drawings and precision fitting. You will be responsible for the assembly, testing, and inspection of mechanical components to ensure high standards of performance and quality. Key Responsibilities: Assemble pumps, agitators, and related mechanical equipment according to engineering drawings, work instructions, and specifications. Perform alignment, fitting, torque tightening, and basic mechanical testing. Ensure all parts and assemblies meet quality and safety standards. Maintain tools, equipment, and work area in clean and safe condition. Identify and report faulty components or assembly issues. Assist in packaging and dispatch preparation after final inspection. Collaborate with quality and engineering teams for continuous improvements. Requirements: ITI in Mechanical Fitter or equivalent. 7 to 8 years of experience in assembling pumps, agitators, or similar rotating equipment Ability to read and interpret mechanical drawings and BOMs. Familiarity with tools such as torque wrenches, dial indicators, and micrometres. Good understanding of tolerances, fits, and assembly practices. Basic knowledge of safety standards and quality control. Preferred Skills: Experience with mechanical seal fitting, bearing installation, and shaft alignment. Exposure to hydraulic or pneumatic testing. Ability to work independently with minimal supervision. Team player with a problem-solving mindset. What We Offer: Competitive salary Overtime Growth and training opportunities Supportive and safety-oriented work environment

you'll be our: Durability Simulation Engineer you'll be based at: IBC Knowledge Park, Bengaluru you'll be aligned with: Team Lead - Durability Simulations you'll be a member of: Durability Team in Simulation CoC What you'll do at Ather: Develop Static Linear and Nonlinear FEA models at component, subsystem and vehicle level for Strength and Durability Correlate FEA models with Test data. Perform Fatigue Analysis Perform virtual DVPs for Topology, Topography, Size and Shape Optimization and DOE s for Durability and Stiffness. Transient Analysis in FEM Implicit domain and Multi body dynamics flex system Perform Explicit Analysis for Crash/Impact/Drop simulations Here s what we are looking for: Strong fundamentals in Strength of Materials, Theory of Machine and Dynamics. Good understanding of Nonlinearities for Material, Contact, Geometric and Load nonlinearity. Hands-on experience in Abaqus, Hyperworks Optistruct, Hypermesh, Ansys Mechanical, HyperStudy, Fatigue Solvers like nCode Design Life, FEMFAT. Experience in Explicit Analysis tools like Radioss, LS-Dyna would be an added advantage You bring to Ather: B.Tech/M.Tech in Mechanical, Automotive or Aerospace Engineering 2-4 years of experience in Durability Simulations

Coordinate and maintain the development and continuous improvement of mechanical production equipment and concepts. Design and develop mechanical manufacturing equipment for the Schaeffler Production System. Define processes for the development of innovative solutions and future demand. Support the further development of the mechanical engineering sector. Deploy state-of-the-art technologies. Create technical documentation, drawings, and specifications in compliance with industry standards. Your Qualifications Graduate Degree in Mechanics, Production Engineering

Develop and maintain the Noise, MAS and line gauge Measurement network & Qualification matrix in AP Level Drive Related improvement Projects with AP Plants Ensure the applicable standards & Procedures are rollout withing the stipuated time. Cordinate with AP B&IS Plant for the investment planning towards Respective QT facilities Conduct relavent QT reviews for the plant and suppliers and mitigate the risks. Involve in plant level escalated complaints related to relavent QT probelms and support them. Visit to AP plants and suppliers to review the status related to QT and its related projects Timely report to HQ and upadte the status for the region Timely communicate Technological information within the AP QT network Provide training to develop noise, MAS and line gauge measurement experts and their qualification in the plant Support plant to create relavent test procedures related QT. Min 20% of the time for travel to AP plant & suppliers locations. Your Qualifications Diploma / B.E in mechanical Engineering with min 10 years of relavent Industries experince. Noise testing and analsing skills as per Schaeffler requirements MAS & line gauge measurement skills.. Good knowledge in Bearing assembly and its testing processes Good Knowledge in Bearing manufcaturing, measurement processes and methods. Good communication, Problem solving, team handling skills Experince in anlaysing and solving Noise related Problems.

Maintain, repair, install and set up electrical and mechanical equipment, machines, tools or parts, used in a production facility assigned. Contribute to planning of maintenance schedules and execute respective maintenance assignments. Analyze technical issues, complete repairs and work orders with reference to electrical systems. Execute ramp up, setup and start procedures in order to prepare machines and equipment for operations. Contribute to installation projects on site, and support accountable Engineers. Support maintenance of technical documentations for processes and equipment. Your Qualifications Vocationally trained in Electronics, Mechanics 1 to 3 years OR Undergraduate Degree in Electronics, Mechanics 1 to 3 years

Analyse the technical complaints of the vehicle in the field. Rectify defects in vehicles / overhaul aggregates. Maintain and handle internet based warranty. Ensure implementation of service processes at channel partners. Development of secondary channel. Feed back on companys as we'll as competitors products. Training of service managers. Work out special service support for strategic customers with channel partners. Ensure execution of spare parts order by all channel partners for sufficient inventory and for meeting spare parts target. Secondary network for spare parts sales. Guide channel partners for manpower/facilities/equipment optimisation. Ensure profitability of workshops of channel partners. MIS on service. Spare parts inventory management. Manging service gaurantee at the dealership. Monthly visit to ASC and monitor his performance along with ASC coordinator. Service camps on monthly basisc. Monthly visits to customer and update M Response data Preferred Industries Education Qualification Diploma in Engineering; Bachelor of Engineering; Diploma in Engineering in Mechanical General Experience 5 years and above Critical Experience System Generated Core Skills Customer Sensitivity Service Orientation Service Management System Generated Secondary Skills Consumer Focus Dealer Relationship Management Service Planning