44 Mcu Jobs - Page 2

The task is to develop the Safety concepts for these safety-related system functions for MCUs. Create hazard assessment and risk analysis (HARA). Perform IP, SoC, DFEMA. Develop FuSa Level3 software for MCU. System knowledge ASIL B, C or D system. Required Candidate profile SEOOC(Safety Element Out of Context), FFI (Freedom From Interference) FIT(Failure Intime) Rate Functional Safety Certified – Level 1 / Level 2 / Level 3

Develop / Sourcing the Electrical and Electronics Components (local & Imports) for EV segments, especially candidates for Motor Controller Units(MCU) products. Commercial / Costing settlement. Negotiation for samples. Supplier selection, VD, etc...

AUTOMOTIVE EMBEDDED TECHNOLOGY PRODUCT LIKE: ECU, TCU, CONTROLLES, ON/OFF BOARD CHARGER. ANALOG, DIGITAL, MCU, SENSORS, POWER, SUPPLIERS AND POWER AND POWER ELCTRONICS. HARDWAREAND SOFTWARE REQUIREMENT UNDERSTANDING AND PRODUCT ARCHITECTURE. Required Candidate profile PLAN, DEVELOPED AND PERFORM TESTING ON THE BENCH VEHICLES IN ALIGNMENT EMI/EMC I/O TESTING, DVP TESTING. ACCOUNTABLE FOR RFQ HANDLE & CONVERSION, VA/VE CONTINUOUS APPROACH. DEVELOP NEW FUNCTION MODULE

Experience : An experienced candidate in a similar field is preferred. Freshers also can apply. This position is responsible for teaching and guiding students for Robotics, Electronics, IoT, Embedded Systems and programming from std. V to VIII at various schools of the Education Network. Providing STEM training in schools based on developed STEM modules by the organization. This involves visits to different schools at various locations. This also involves guiding the students to work on innovative projects for various national and international competitions. This includes troubleshooting minor software and hardware issues as well This also comprises training to internal and external staff of the schools. Duties and responsibilities Ensure that all children pay attention to. Promote maximum student participation. Enhance and implement teaching methodologies such as hands-on learning activities. Assist students in analysing and improving scientific conception and logical thinking. Enforce the discipline and maintain appropriate standards for student behaviour in the STEM lab. Be responsible for the emotional and physical wellbeing of every child. Maintain effective communication with the principals of the schools and report to them about daily activities. Desired candidate profile UG: B. Tech/B.E. / BSc - Any Specialization PG: M. Tech/M.E./M.Sc. - Any Specialization Should have good knowledge in Science up to XII grade. Well versed in software and basic programming languages like C, C++, etc Should have basic knowledge of sensors, MCU (microcontroller unit), robotics and embedded systems. Superior written and verbal communication skills. Should have practical knowledge of electronics. Good time-management skills Must be passionate about learning new technology and guiding/training/teaching young students from std. V to VIII.

This position is responsible for teaching and guiding students for Robotics, Electronics, IoT, Embedded Systems and programming from std. V to VIII at various schools of the Podar Education Network. Providing STEM training in schools based on developed STEM modules by the organization. This involves visits to different schools at various locations. This also involves guiding the students to work on innovative projects for various national and international competitions. This includes troubleshooting minor software and hardware issues as well. This also comprises training to internal and external staff of the schools. Duties & Responsibilities : Ensure that all children pay attention to. Promote maximum student participation. Enhance and implement teaching methodologies such as hands-on learning activities. Assist students in analysing and improving scientific conception and logical thinking. Enforce the discipline and maintain appropriate standards for student behaviour in the STEM lab. Be responsible for the emotional and physical wellbeing of every child. Maintain effective communication with the principals of the schools and report to them about daily activities. Desired Candidate Profile: UG: B. Tech/B.E. / BSc - Any Specialization PG: M. Tech/M.E./M.Sc. - Any Specialization Should have good knowledge in Science up to XII grade. Well versed in software and basic programming languages like C, C++, etc. Should have basic knowledge of sensors, MCU (microcontroller unit), robotics and embedded systems. Superior written and verbal communication skills. Should have practical knowledge of electronics. Good time-management skills Must be passionate about learning new technology and guiding/training/teaching young students from std. V to VIII.

This position is responsible for teaching and guiding students for Robotics, Electronics, IoT, Embedded Systems and programming from std. V to VIII at various schools of the Education Network. Providing STEM training in schools based on developed STEM modules by the organization. This involves visits to different schools at various locations. This also involves guiding the students to work on innovative projects for various national and international competitions. This includes troubleshooting minor software and hardware issues as well. This also comprises training to internal and external staff of the schools. Duties & Responsbilities: Ensure that all children pay attention to. Promote maximum student participation. Enhance and implement teaching methodologies such as hands-on learning activities. Assist students in analysing and improving scientific conception and logical thinking. Enforce the discipline and maintain appropriate standards for student behaviour in the STEM lab. Be responsible for the emotional and physical wellbeing of every child. Maintain effective communication with the principals of the schools and report to them about daily activities. Desired Candidate Profile: UG: B. Tech/B.E. / BSc - Any Specialization. PG: M. Tech/M.E./M.Sc. - Any Specialization. Should have good knowledge in Science up to XII grade. Well versed in software and basic programming languages like C, C++, etc. Should have basic knowledge of sensors, MCU (microcontroller unit), robotics and embedded systems. Superior written and verbal communication skills. Should have practical knowledge of electronics. Good time-management skills Must be passionate about learning new technology and guiding/training/teaching young students from std. V to VIII.

We are looking for application engineer with 7+years of experience with extensive knowledge of AC/DC and DC/DC system level designs, Job Description In your new role you will: Contributing to major product cross-functional teams for both product development and customer supporting, Prototyping and producing requirements definitions for new application and solutions, Producing content in support of new GaN and controller/ gate drivers products, including: New product definition/ validation Hardware &System-level designs/ reviews including schematic, layout and componentselection for demo boards/ EVBs/ reference designs/customer requests, Deep analysis on products and find the value propositions, Technical documentation and promoting materials such as datasheets,technical reference manuals, application notes and knowledge basearticles, Technical training for external customers and Infineon Sales,Marketing and Applications Enabling customer design-in of products andsolutions through architectural collaboration, technical support,training and failure analysis, Your Profile You are best equipped for this task if you have: Bachelors/Master's degree above in Electrical Engineering or anequivalent field, Experience on Charger/ Adapters, SMPS, AC/DC, Solar, ESS, inverter,Motor Drivers is preferred Extensive knowledge of AC/DC and DC/DC system level designs with experience in testing, debugging and device selection; Strong understanding of one or more of the following category Non isolated and isolated DC/DC topologies like buck, boost, halfbridge, full bridge, multiphase converters SMPS topologies like PFC, LLC, etc Motor driver, Inverters; Solar, Energy Storage, and Industrial Power Applications, Experience with product, system or application development in asemiconductor environment Problem solver, and happy to help on customers technicalrequirements; Be familiar with software tools such as Altium Designers,Mathcad/Matlab, PLECS, Simplis/Simetrix, Labview; Familiar with digital control with FPGA or MCU/ DSP will be a plus; Understanding the switching power component MOSFET, IGBT etc GaN andSiC MOSFET experience is a plus; Teamwork, self-discipline/ motivated/ innovative and aggressive;Good verbal and written communication skills Contact: Shavin shashidhar@infineon, #WeAreIn for driving decarbonization and digitalization, As a global leader in semiconductor solutions in power systems and IoT, Infineon enables game-changing solutions for green and efficient energy, clean and safe mobility, as well as smart and secure IoT Together, we drive innovation and customer success, while caring for our people and empowering them to reach ambitious goals Be a part of making life easier, safer and greener, Are you in We are on a journey to create the best Infineon for everyone, This means we embrace diversity and inclusion and welcome everyone for who they are At Infineon, we offer a working environment characterized by trust, openness, respect and tolerance and are committed to give all applicants and employees equal opportunities We base our recruiting decisions on the applicants experience and skills, Please let your recruiter know if they need to pay special attention to something in order to enable your participation in the interview process, Click here for more information about Diversity & Inclusion at Infineon,

Job Title : Principal EngineerExperience : 6 to 8 YearsJob Location : Ahmedabad Job Description:Engineer would be responsible for ensuring that the design is in line with the technical and qualityrequirements set for the team particularly with respect to functional and code coverage. Responsibilities: Able to execute multiple projects at a same time Hands on programming/coding, and debugging Customer Front facing , Customer Communication, Customer value addition Continuous development of team to serve the customer requirements in faster and efficient way Ability for Pre-Sales Support / Proposal preparation Ability for Building/Mentoring Freshers/Jr. team members Openness to work upon various technology Project Execution life cycle - Requirement Understanding, Design, Development, Bug Fixing Review & Documentation - RS, Design, Test Plan/Test cases... On Time & Quality Deliverable New Candidate Interview and Evaluation Strong practical hands-on with C programming ; Debugging skills Strong understanding of programming over Microcontroller with & without any OS (RTOS) Baremetal programming, FreeRTOS, ThreadX Strong understanding of various tools for static analysis of the code Strong project execution track record with microcontrollers/microprocessors like PIC, ST, Atmel, NXP and TI Hands-on with connectivity protocol application development on Microcontroller/microprocessors like BLE, Zigbee and RF Debugging software issues over Microcontroller/microprocessors with debugging tools like J-Link Strong knowledge of Git version control system Experienced with customer interaction (US and Europe preferred) is a must Excellent analytical and problem-solving skills Participate in feature and designs discussions within and across teams Fluent and confident English (verbal and written) Desired Skills: OOPS Programming languages C++ Embedded GUI Development QT or similar Hands-on with application development on Microcontroller running RTOS like FreeRTOS Hands-on with connectivity protocol application development on Microcontrollers like Z-Wave Hardware schematics review and PCB debugging Working experience of architecting embedded systems Knowledge of using tools like logic analyzer and digital oscilloscope

Role & responsibilities - Lead prototype activities including specification finalization, CAD packaging, and horizontal deployment. Develop scalable motor and Motor Control Unit (MCU) solutions for rapid adaptation and deployment. Spec optimization through winding variation and rare earth material usage • Oversee schematic design, BOM finalization, DFMEA, and layout development. Monitor technological trends and support marketing teams with comparative vendor analysis. Work extensively on PMSM and BLDC motors, perform MCU tuning and calibration to meet speed and torque requirements. Drive VAVE (Value Analysis & Value Engineering) initiatives and define continuous improvement roadmaps.

Job Title : Principal Engineer Experience : 6 to 8 Years Job Location : Ahmedabad Job Description: Engineer would be responsible for ensuring that the design is in line with the technical and quality requirements set for the team particularly with respect to functional and code coverage. Responsibilities: Able to execute multiple projects at a same time Hands on programming/coding, and debugging Customer Front facing , Customer Communication, Customer value addition Continuous development of team to serve the customer requirements in faster and efficient way Ability for Pre-Sales Support / Proposal preparation Ability for Building/Mentoring Freshers/Jr. team members Openness to work upon various technology Project Execution life cycle - Requirement Understanding, Design, Development, Bug Fixing Review & Documentation - RS, Design, Test Plan/Test cases... On Time & Quality Deliverable New Candidate Interview and Evaluation Strong practical hands-on with C programming ; Debugging skills Strong understanding of programming over Microcontroller with & without any OS (RTOS) Baremetal programming, FreeRTOS, ThreadX Strong understanding of various tools for static analysis of the code Strong project execution track record with microcontrollers/microprocessors like PIC, ST, Atmel, NXP and TI Hands-on with connectivity protocol application development on Microcontroller/microprocessors like BLE, Zigbee and RF Debugging software issues over Microcontroller/microprocessors with debugging tools like J-Link Strong knowledge of Git version control system Experienced with customer interaction (US and Europe preferred) is a must Excellent analytical and problem-solving skills Participate in feature and designs discussions within and across teams Fluent and confident English (verbal and written) Desired Skills: OOPS Programming languages C++ Embedded GUI Development QT or similar Hands-on with application development on Microcontroller running RTOS like FreeRTOS Hands-on with connectivity protocol application development on Microcontrollers like Z-Wave Hardware schematics review and PCB debugging Working experience of architecting embedded systems Knowledge of using tools like logic analyzer and digital oscilloscope

--------------------------------------------------------------------------------------------- There will be face to face discussion for this role in Amantya Gurgaon Office,Kindly apply only if you are available for Face to face discussion: -------------------------------------------------------------------------------------------- Job Title: Embedded Software Engineer (Microcontroller) Key Skills: Proficiency in C/C++ for embedded systems development. Strong understanding of embedded system architectures(e.g. STM family), especially MCUs (ARM, 32bit, 8 bit, 16 bit, DSP, etc.) Experience with real-time operating systems (RTOS) and bare-metal systems. Strong understanding of communication protocols like SPI, I2C, UART, MODBUS, and CAN. Familiarity with development and debugging tools like JTAG, GDB, Eclipse, STMCUBEIDE, and Keil. Understanding of power management and performance optimization techniques for embedded systems. Experience with peripheral integration (GPIO, timers, ADCs, DACs, etc.) Basic understanding of memory and power optimization Experience with JIRA, Git, and Bitbucket Good to have: experience in Camera domain (ISP pipelines) Keys Responsibilities: Capable of independently driving embedded software development. Design and implement complex embedded software systems for MCUs. Optimize software for memory, performance, and power consumption, especially in constrained environments. Troubleshoot and debug hardware/software integration issues, using both software and hardware tools. Engineer should be able to independently design the embedded application and implement it. Mentor junior engineers, fostering a culture of best practices. Stay up to date with the latest trends and technologies in embedded systems development. Work closely with cross-functional teams (hardware, product, and testing) to deliver high-quality products. Use project management and version control tools like JIRA, Git, and Bitbucket effectively Support camera-related ISP features in projects, if applicable

Skills: - Should have experience in Automotive Software Development- Should have experience in Embedded C development for microcontrollers- Experience in working on AUTOSAR Configuration, Implementation/Development and Testing- Expertise on Multi-core microcontroller architecture, device drivers, compiler, debugger- Should have experience on Autosar MCAL for peripherals like MCU, Port, GPT, DIO, Watchdog, PWM, CAN, Ethernet, LIN, SPI.- should have good hands-on experience in Autosar tools Davinci Configurator, EB tressos.- define Test plans and implement Test case or Test application for validating the MCAL drivers- Should understand Vehicle networking protocols like CAN ,LIN, Ethernet- Experience in any of the Vector Testing tools like CANOe, Canalyzer- Ability to understand technical issues and guide teams on possible focus areas.- Ability to read/understand schematics and also be familiar with use of oscilloscope and logic analyzer for trouble shooting.

Job Information Job Opening ID ZR_2106_JOB Date Opened 08/02/2024 Industry Technology Job Type Work Experience 4-6 years Job Title Autosar MCAL City Bangalore North Province Karnataka Country India Postal Code 560002 Number of Positions 4 LocationBangalore, Pune Required Skills: - Should have experience in Automotive Software Development- Should have experience in Embedded C development for microcontrollers- Experience in working on AUTOSAR Configuration, Implementation/Development and Testing- Expertise on Multi-core microcontroller architecture, device drivers, compiler, debugger- Should have experience on Autosar MCAL for peripherals like MCU, Port, GPT, DIO, Watchdog, PWM, CAN, Ethernet, LIN, SPI.- should have good hands-on experience in Autosar tools Davinci Configurator, EB tressos.- define Test plans and implement Test case or Test application for validating the MCAL drivers- Should understand Vehicle networking protocols like CAN ,LIN, Ethernet- Experience in any of the Vector Testing tools like CANOe, Canalyzer- Ability to understand technical issues and guide teams on possible focus areas.- Ability to read/understand schematics and also be familiar with use of oscilloscope and logic analyzer for trouble shooting. check(event) ; career-website-detail-template-2 => apply(record.id,meta)" mousedown="lyte-button => check(event)" final-style="background-color:#2B39C2;border-color:#2B39C2;color:white;" final-class="lyte-button lyteBackgroundColorBtn lyteSuccess" lyte-rendered=""> I'm interested

Role & responsibilities Conceptualize and developing of EV powertrain layout and designing components for 2 and 3 Wheelers and their integration. Collaborate with engineering, design, and production teams to ensure seamless integration and timely project delivery. Perform tolerance stack-up analysis for critical drivetrain and electric motor components. Oversee prototype development, testing, and validation processes for EV Powertrain components. Conduct benchmarking and implement performance optimization strategies. Lead the documentation of design specifications, Design releases and testing results for internal reference and potential patent applications. NOTE- Diploma Candidates with relevant experience preferred.

Roles and Responsibilities Validate AUTOSAR software components using various tools such as Davinci Configurator, MCAL, PWM, GPT, WDG, ADC, DIO, PORT, MEMM, SPI, UART, CDD. Collaborate with cross-functional teams to identify and resolve issues related to AUTOSAR validation. Develop test plans and cases for AUTOSAR modules and integrate them into the overall testing strategy. Conduct thorough analysis of results from tests conducted on AUTOSAR software components. Provide technical guidance to junior team members on best practices for AUTOSAR validation. Desired Candidate Profile 5-10 years of experience in AUTOSAR development or validation with expertise in Embedded C programming language. Strong understanding of AUTOSAR architecture and its application in automotive systems. Proficiency in using various tools like Davinci Configurator, MCAL, PWM, GPT, WDG etc. for validating AUTOSAR software components.

1.S/w experience type: C language-based Embedded S/W (Firmware) development, MCU, CAN/LIN communication control experience. 2.MCU, CAN/LIN communication controller design experience, AMP design experience. Required Candidate profile Main tasks: Development of ultrasonic sensor for distance sensing ,calibration and evaluation of sensor vehicle. (a) Software design using CAN/LIN

Designation : Senior Engineer / Principal Engineer / Technical Lead Experience Required : 4 to 9 Years Job Location : Ahmedabad Shift Timings : 10 AM to 7 PM (Mon-Fri) Job Functions / Responsibilities: Able to execute multiple projects at a same time Hands on programming/coding, and debugging Customer Front facing , Customer Communication, Customer value addition Continuous development of team to serve the customer requirements in faster and efficient way Ability for Pre-Sales Support / Proposal preparation Ability for Building/Mentoring Freshers/Jr. team members Openness to work upon various technology Project Execution life cycle - Requirement Understanding, Design, Development, Bug Fixing, code review Review & Documentation - RS, Design, Test Plan/Test cases... On Time & Quality Deliverable New Candidate Interview and Evaluation Area of expertise Strong practical hands-on with C programming & Debugging skills Strong understanding of programming over Microcontroller with & without any OS (RTOS) Baremetal programming, FreeRTOS, ThreadX Strong understanding of various tools for static analysis of the code Strong project execution track record with microcontrollers/microprocessors like PIC, ST, Atmel, NXP and TI Hands-on with connectivity protocol application development on Microcontroller/microprocessors like BLE, Zigbee and RF Debugging software issues over Microcontroller/microprocessors with debugging tools like J-Link Strong knowledge of Git version control system Experienced with customer interaction (US and Europe preferred) is a must Excellent analytical and problem-solving skills Participate in feature and designs discussions within and across teams Fluent and confident English (verbal and written) Skills Required: OOPS Programming languages C++ Embedded GUI Development QT or similar Hands-on with application development on Microcontroller running RTOS like FreeRTOS Hands-on with connectivity protocol application development on Microcontrollers like Z-Wave Hardware schematics review and PCB debugging Working experience of architecting embedded systems Knowledge of using tools like logic analyzer and digital oscilloscope

Required Skills: - Should have experience in Automotive Software Development - Should have experience in Embedded C development for microcontrollers - Experience in working on AUTOSAR Configuration, Implementation/Development and Testing - Expertise on Multi-core microcontroller architecture, device drivers, compiler, debugger - Should have experience on Autosar MCAL for peripherals like MCU, Port, GPT, DIO, Watchdog, PWM, CAN, Ethernet, LIN, SPI. - should have good hands-on experience in Autosar tools Davinci Configurator, EB tressos. - define Test plans and implement Test case or Test application for validating the MCAL drivers - Should understand Vehicle networking protocols like CAN ,LIN, Ethernet - Experience in any of the Vector Testing tools like CANOe, Canalyzer - Ability to understand technical issues and guide teams on possible focus areas. - Ability to read/understand schematics and also be familiar with use of oscilloscope and logic analyzer for trouble shooting.

- Embedded C / C++ -FreeRTOS -ESP32 / ESP-IDF or Nordic SDK -Wi-Fi Stack / Embedded Wi-Fi -MQTT / BLE send ur resume ; 8136966446