265 Material Testing Jobs - Page 5

Urgent Requirement Lab Chemist FRESHER Location - Umbergaon Salary - 15k to 30k Education - B.Sc Chemistry No of Requirement -05 Mob no 76989 92229 Mob no 88662 96627 Hare Murari Placement service

Job Description Hands on industrial experience in Biotech/ Biologics industry on Raw/ Packaging Material Testing. Basic Knowledge/ Hands on experience in handling of equipment s pertaining to RM/PM testing including but not limited to HPLC/GC/UV-visible Spectrophotometry, FTIR, Polarimeter, Refractometer, Autotitrator, TOC analyzer, Weighing balance, pH/ conductivity meter, Melting range apparatus, Viscometer. Familiar with the basic cGMP systems including but not limited to sample management, OOS/OOT, Documentation control, Change Control, Audits, Deviation & CAPA Management. Timely sampling & testing of Raw/Packaging/ Consumable materials as per Pharmacopoeial/In-house procedures. Perform Daily sampling & testing of Utility samples with online documentation & trending. Preparation of SOP s/ STP s/ equipment URS/ Qualification/ Study protocols/ reports pertaining to RM/PM section Perform daily calibration/ verification/ requalification of analytical equipment s as per the approved procedures & calibration/ verification frequency with online documentation. The candidate should be conversant with Quality module of SAP and LIMS system. Timely Updation of RM/PM/CM and water analysis results in SAP and LIMS system. The candidate should be conversant procedure for procurement of chemicals/ Reagents/ consumables and maintain their inventory records. To Ensure cGMP compliance in laboratory and ensure that the laboratory is always maintained in audit ready status. Work Experience 2 to 4 years Education Masters in Chemistry or Analytical Chemistry Competencies

- Material quality checking according to drawing. - Good knowledge of quality checking of Sheet Metal materials. - Raw Material Quality Check. Interested Candidates Can Reach Me : 9606001643

To ensure all products meet the company’s quality standards by inspecting raw materials, in-process production, and finished goods. The QCI have to in identify defects, ensuring compliance with regulations , and maintaining product quality. Required Candidate profile Candidates must have complete knowledge of ISI Standards in Plastic Industry ( Tanks, Pipes and Fittings), about BIS Inspections and quality standards.

CalibroMeasure Equipments Pvt. Ltd. is looking for Quality Engineer to join our dynamic team and embark on a rewarding career journey Developing and implementing quality standards. Developing and implementing quality control systems. Monitoring and analyzing quality performance. Inspecting and testing materials, equipment, processes, and products to ensure quality specifications are met. Collaborating with operations managers to develop and implement controls and improvements. Ensuring that workflows, processes, and products comply with safety regulations. Investigating and troubleshooting product or production issues. Developing corrective actions, solutions, and improvements. Reviewing codes, specifications, and processes. Diploma in Mechanical engineering, or equivalent Excellent knowledge of engineering dwg Knowledge of all GD&T symbols Proficient in Microsoft Office

Role & responsibilities Study and understand customer requirement and perform various Micro / Metallurgical Tests on Ferrous and Non Ferrous samples. Perform Various Corrosion Tests - Intergranular, NACE Corrosion Tests such as HIC, SSCC, etc. and interpret the results. Perform grain size measurement, phase identification, decarburization, and inclusion rating. Ensure traceability of samples and timely communication with reporting authority. Assist in understanding client test requirements and suggest appropriate test methods. Participate in technical discussions with customers during audits or report clarifications. Provide metallurgical insight in root cause investigations and product failure evaluations. Ensure all work complies with ISO/IEC 17025 standards and ELCA Lab SOPs. Support internal and external audits, participate in method validation and uncertainty estimation. Maintain lab cleanliness, safety, and equipment upkeep. Preferred candidate profile Sound understanding of ferrous and non-ferrous metallurgy. Hands-on skills in metallographic preparation and microscopy. Familiarity with international testing standards (ASTM, IS, ISO). Knowledge of heat treatment and welding metallurgy is a plus. Strong analytical and documentation skills. Team-oriented with ability to work independently under timelines.

Designation - Civil Material Testing Technician Qualification - BE/Diploma/ITI Experience - 1 - 5 years Location - DUBAI Industry - Construction Salary - 1500 AED to 2800 AED Visa - Employment Contact HR JAI - 7200153859 Required Candidate profile Candidates Should have minimum 1year Experience in Material Testing Field . Mandatory Documents 1. Resume 2. Original Passport 3. Passport Size Photo - 2 WhatsApp to -Maha -7200153859 Perks and benefits Free Accommodation and Transport

Role & responsibilities Assist Lab manager in Spectrometer analysis, along with raw material analysis including hardness and crack testing, Preferred candidate profile Degree in Chemistry having 1 to 2 years of experience in material testing or any other relevant expereince. Perks and benefits PF, ESI, Bonus etc.,

Responsibilities: Checking and testing wires & cables when material comes from supplier. Visual checking, size checking, must know how to use measuring instruments, basic knowledge of wires & cables quality. Basic knowledge of computers.

Coordination, scheduling, monitoring, controlling and supervision of all quality related activities. Monitoring project activities as per the quality management system. Monitoring and inspecting all materials to ensure quality criteria is met as per requirements or specification limit. Oversee design, testing and rework logs, and ensure they meet contract and industry standards. Maintaining & controlling quality standards; examining the methodology for specific operations, managing records and QMS documents as per QA / QC norms. Problem solving capability, doing root cause analysis and taking corrective and preventive measures. Preparation and submission of M.I.S. reports. Understanding and maintaining of ISO relevant requirements. Auditing on site from time to time as per ISO standards. Having interaction with clients, internal & external communications, implementation of norms as laid down by the organization. Training to juniors on quality aspect of constructions on routine basis. Understanding on risk management along with compliance of customer requirements. Desired Candidate Profile Should be able to balance team and individual responsibilities Should exhibit objectivity and openness to others views. Exhibit confidence in self and others, inspire and motivate team to perform well Effectively influence actions and opinions of others, inspire respect and trust, provide vision and inspiration to peers and subordinates, displays passion and optimism Knowledge of RMC Knowledge of Design Mixes, Testing of materials, Knowledge of Indian Standards relevant to sampling, testing, specifications, construction and Inspection Excellent leadership, communication, coordination and negotiation skills-with internal team and client Skilfully communicate with any consultants, subcontractors, supervisors, planners, and others stake holders involved with the project Collating data, conducting qualitative audits and writing reports Critical thinking, conflict resolution and maintaining cordial & healthy operating conditions Oversee Quality and Safety aspects. Capable of training his team Ensure the project is delivered on time and on budget by setting benchmarks Numerical and IT skills, including knowledge of latest methods/ techniques for ensuring quality control Knowledge of software commonly used in construction field for quality control Updated with latest quality control trends, techniques and knowledge of innovative use of material Able to independently prepare QC Plan, Method Statement and check lists Experience in Sub soil works, Roads and Construction, soil testing will be an added advantage Resolve the quality issues through provisions of Indian Standards and or through Non Destructive test Knowledge of rectification and water proofing works is desirable. Knowledge of International Standards will be an additional advantage

Hiring QC Engineer – Civil for Kallakurichi site. Ensure quality compliance in civil construction, inspections, testing, and documentation. Full-time role with competitive salary. Required Candidate profile Diploma/B.E. in Civil with 4–8 yrs experience in QA/QC. Strong knowledge of codes (IS/ASTM), site inspection, QA/QC docs, and AutoCAD. Certification in QA/QC is an added advantage

Vantive is a vital organ therapy company on a mission to extend lives and expand possibilities for patients and care teams everywhere. For 70 years, our team has driven meaningful innovations in kidney care. As we build on our legacy, we are deepening our commitment to elevating the dialysis experience through digital solutions and advanced services, while looking beyond kidney care and investing in transforming vital organ therapies. Greater flexibility and efficiency in therapy administration for care teams, and longer, fuller lives for patients that is what Vantive aspires to deliver. We believe Vantive will not only build our leadership in the kidney care space, it will also offer meaningful work to those who join us. At Vantive, you will become part of a community of people who are focused, courageous and don t settle for the mediocre. Each of us is driven to help improve patients lives worldwide. Join us in advancing our mission to extend lives and expand possibilities. Job Summary Job Title - Sr Manager - Materials Strategy Location - Whitefield, Bangalore Shift - General Job Responsibilities and Skills: Provide technical expertise for all the Materials related programs at a global front for both Sustaining and New product organization across Kidney Care Product Portfolio Subject matter expert for driving new materials selection for the container platforms across Drug Products organization Provide support for the trouble shooting and root cause analysis using statistical tools for any Polymer and Material related programs in alignment with the key internal stakeholders at a global front Proactively engage in the scoping, ideation, concept selection, and other key development decisions for all drug product, materials, and containers related projects. Drive alignment to the defined product portfolio vision and technology roadmaps through your active engagement. Developing Roadmaps for the future Kidney Care Solutions products. Provide technical expertise and lead technical program planning for any new container platform development and Formulations for drug products Design, lead and coordinate material testing with external and internal laboratories as the need arises Create design inputs and outputs/requirements documents for the new products as we'll as qualification strategy and plan. Identify and analyze design problems to achieve optimal solutions that satisfy cost and technical requirements using both internal and external technical resources. Formulate new, innovative approaches to solve technical problems on a consistent basis. Shape external collaborations with premier research institutes and contract research labs to explore new concepts in an efficient manner eg, novel materials, sustainability and best-in-class/new manufacturing processes. Communicate key information and recommendations to internal (purchasing, quality, marketing and production) and external partners to influence technical decisions and strategy. Develop global, business-strategy-aligned, materials and container technology roadmaps in support of the Kidney Care drug products portfolio Create and communicate project plans, tasks and deliverables and manage time to meet project deadlines. This includes reporting pertinent information at key milestones through clear, concise oral and written communications. Maintain an in-depth knowledge and understanding of GxP and regulations related to new product development. Demonstrate agile mindset in project executions - both in field issue resolutions and new product/material development. Demonstrated ability to innovate - through structured innovation process, leading and facilitating brainstorming sessions, coalescing diverging set of ideas into a solution that can be pursued and matured. Deep working knowledge about extrusion, injection molding and/or injection molding parts Understanding of mold flow studies and application of same towards solving technical problems Understand implications of a material change in a very broad perspective (product impact, process impact, regulatory implications, end user, sterilization etc) Demonstrated ability to design and execute and interpret results from material behavior, mechanical testing, and material characterization. Extensive experience in utilizing material characterization tools to solve problem oneself and coach/mentor a team of researchers. Proven ability to solve business problem at hand. Demonstrated ability to decompose complex problems into task lists and lead a team of senior scientists in ensuring on-time execution with attention to quality and first-time-right. Demonstrated ability to draw conclusions and make recommendations based on technical inputs from multiple and varied function (ie, manufacturing, quality, regulatory, etc) Proven communication skills and ability to perform in a cross-functional team environment Ability to drive change initiatives. Ability to work in a multi-cultural environment. Ability to coach and develop new team members. Good understanding of regulations applicable for drug and medical devices. Qualification: Holds a MSc or M. Tech with 15+ years or Ph.D. with 13+ years in one of the following disciplines - material science, polymer science, polymer engineering, or equivalent. Minimum of 12 to 15 years of diverse industrial experience in the given technical domains of interest. Reasonable Accommodation

Mechanical Job Title: Mechanical Engineer - Solar Projects Job Overview: The Mechanical Engineer will be responsible for the design, installation, and commissioning of mechanical systems and structures for solar power projects. This includes mounting structures, trackers, module alignment, and mechanical infrastructure. The role requires ensuring quality control, safety compliance, and timely completion of project milestones. Key Responsibilities: Design and Engineering: Develop mechanical designs and layouts for solar module mounting structures (MMS) and trackers. Perform load calculations, material selection, and structural analysis. Prepare BOQs, technical specifications, and design reports. Ensure compliance with relevant standards (e.g., IS, ASTM, IEC). Site Management: Supervise the installation of mechanical components on-site. Provide technical support during construction, testing, and commissioning. Resolve on-site mechanical issues and ensure corrective actions are taken. Coordination and Communication: Collaborate with design teams, contractors, vendors, and other stakeholders. Monitor and report project progress to ensure timelines and budgets are met. Participate in site meetings and ensure alignment on mechanical-related activities. Compliance and Safety: Ensure all mechanical installations comply with safety and quality standards. Conduct quality inspections and material testing as per project requirements. Implement best practices for safety and ensure regulatory compliance. Documentation: Maintain accurate records of project drawings, reports, and technical documentation. Prepare progress reports and provide input for project status updates. Qualifications and Experience: Bachelors degree in Mechanical Engineering or a related field. 3-7 years of experience in mechanical engineering, preferably in solar or renewable energy projects. Knowledge of material strength, structural engineering, and load analysis. Experience in installation of solar mounting structures and trackers. Strong problem-solving and analytical skills. Excellent communication and collaboration abilities. Preferred: Experience in large-scale solar projects.

Location: Surat, Gujarat Department: Research & Development Reporting To: Head - R&D Experience: 4-8 years in R&D with a focus on construction chemicals Qualification: M.Sc. / M.Tech / Ph.D. in Chemistry, Chemical Engineering, or Materials Science Position Objective: To lead and oversee R&D functions focused on the development, enhancement, and innovation of construction chemical products at the Surat facility. The role will contribute to product strategy, technical excellence, and competitive product offerings for national and international markets. Key Responsibilities: Concrete admixtures Waterproofing systems Repair mortars & grouts Industrial floorings & coatings Surface treatments and sealants Drive innovation projects in collaboration with marketing and technical teams based on customer feedback and market demand. Evaluate and implement sustainable and cost-effective formulations. Lead pilot plant trials and assist production teams during scale-up and commercialization. Collaborate with raw material suppliers for technical discussions, product validation, and alternate sourcing. Ensure compliance with BIS, ASTM, EN, ISO, and environmental regulations relevant to product performance and safety. Supervise lab activities, QA/QC testing protocols, and product benchmarking. Mentor and manage a team of scientists and lab technicians, promoting a culture of research, safety, and continuous improvement. Maintain accurate technical documentation including TDS, MSDS, formulation sheets, and product certifications. Interact with customers, applicators, and project teams to provide on-site technical support, training, and troubleshooting. Liaise with academic institutions and research partners for co-development opportunities. Required Skills & Competencies: Strong formulation and application knowledge in construction chemicals. Familiarity with chemical testing instruments (e.g., rheometers, viscometers, FTIR, SEM, etc.). Deep understanding of performance standards and industry trends. Excellent team leadership and interpersonal skills. Ability to manage multiple R&D projects simultaneously. Strong documentation, analytical, and communication skills. Experience in patent writing or product IP management is a plus. Key Skills : New Product Development Product Formulation Of Waterproofing Grouts Tiles Adhesives Raw Material Testing R&d Continous Improving Quality Epoxy

Were currently seeking a highly skilled and experienced Quality Engineer to join our team. In this role, you will be responsible for ensuring the safety and quality of our products and procedures through rigorous inspections, implementation of quality control measures, and identification of areas for improvement. You will collaborate with cross-functional teams to address quality issues, drive continuous improvement, and contribute to building high-quality products that exceed customer expectations. The ideal candidate will possess a strong background in engineering or quality assurance, exceptional attention to detail, and a proactive mindset. If you are passionate about quality and delivering excellence, we encourage you to apply and become a valued member of our team. Responsibilities & Skills Roles and Responsibilities Ensure quality control during construction projects by conducting regular inspections of raw materials, in-process products, and finished goods. Conduct soil testing to determine suitability for foundation work and pile foundations. Perform final inspections to verify compliance with project specifications and standards. Collaborate with cross-functional teams to identify and resolve quality issues. Maintain accurate records of test results, inspection reports, and other relevant documentation.

M aterial testing lab and exposure to automotive parts of various material testing. Casting /Forging / steel /Rubber /Plastic parts – Physical / chemical analysis Hardness testing machines . Spectrometer testing , Microscopic analysis etc Required Candidate profile Diploma / Degree in metallurgy and experience of 3-5 years – in material testing lab and exposure to automotive parts of various material testing. Casting /Forging / steel /Rubber Plastic parts Perks and benefits Best in the industry

Role & responsibilities: ASSISTANT QUALITY CUM MATERIAL EXPERT ENGINEER: The candidate should be a Graduate in Civil Engineering/Survey with at least 5 years experience in highway projects and should have handled at least 1 highway project of similar nature as Quality Control Engineer. He should not be more than 60 years of age. He will be responsible for supervising all the tests to be done in different stages of maintenance works, besides ensuring that specified tests are done as per codal stipulations and as per the specifications laid down in the contract. He shall look into the quality assurance aspects. (5 Year Experience in Highway) Only Whatsapp your CV: 9588205118 Salary: 2Lac to 3.50Lac

Job Description: Responsible for framing Solutions for EISBG Design and develop EISBG solution prepositions Developing new Applications and Solution pitch for Business Team Provide up to date technical information , Sales collaterals and Product information to Solution Sales team Responsible for all technical aspects of infrastructure Sales cycle from pre sales discussion , solution design ,pricing and proposals to handover to support & Projects implementation department Resolve Level 3 infrastructure support issues related to design Focusing on meeting the customer s needs Provide the design and cost structure to Business Liaison with industry consultants to understand the technology trends Interact with Product teams to understand Road map and guide in requirement of the region in consultation with Business team Interact with Supply chain to provide specs for cost structure for outsource products Skill Sets & Expertise: Go getter and early opportunity spotter Innovation and creativity Strong Business analysis skills Strong interpersonal skills Team player and good leadership, communication qualities Experience: Around 12~15 Years of total experience in framing Solutions , Min 8 years experience Energy Sector Strong knowledge of Power electronics Hardware and software s Education: Bachelor Degree in Electrical or Electronics Engineering

Responsibilities: Collaborate with R&D team on new product development. Maintain accurate records and report findings. Conduct lab tests on materials using chemistry knowledge. Annual bonus Provident fund

Ensure quality assurance and quality control of civil construction projects by monitoring project activities, conducting inspections, and ensuring compliance with project specifications and safety standards.

Key Responsibilities: Achieve sales targets through new client acquisition and key account management. Identify business opportunities in target sectors (manufacturing, infrastructure, etc.). Prepare and follow up on proposals, quotations, and technical discussions. Build and maintain strong relationships with clients and industry stakeholders. Coordinate with lab/technical teams to ensure smooth service delivery. Track market trends, competitor activity, and client feedback. Ensure timely invoicing and payment collection. Represent the company at trade shows and client meetings. Preferred candidate profile: Graduate in Science/Engineering (Mechanical/Electrical/Civil/Metallurgy); MBA is a plus. Hands on experience in B2B sales or business development. Knowledge of material testing/calibration services preferred. Strong communication, negotiation, and relationship-building skills.

Casting pouring Casting defects Machining inspection knowledge Pumps types & Material test certificates Review of WPS/PQR/WPQ Review & PMI, NDT procedures, MRT Knowledge of Pumps parts like volute casing, casing cover, Impeller balancing stuffing box

Skills Required Excellent oral and written communication skills Experience in Inside Sales from Automation Industries. Should have complete sales knowledge of product selling process in Automation OEM/SI/PB Customer Mapping Time management Negotiation Customer Support Relationship Management, Business Development, etc. KRA s After enquiry PLC, DCS study. Schematic and datasheet preparation Customer interaction from the technical front and datasheet approval. Bill of Material creation in ERP system. New development prototype testing and document creation. Production training and provide testing guidelines. Purchase order checking and suggest the correct part number. Old design data generation and submission to the production team after the compiling process. Help with the raw material testing to the inward quality check department if needed. Training the sales team for new as well as existing enquiries. Updating all the enquiry-related data in the CRM. Application understanding and providing customized solutions to the customers. Resolve all the old Gerber-related issues at the vendor s end. Alternate make suggestion to the sourcing dept. Discuss with the outsource partners for outsourcing material for new enquiries. Different acrylic designs using coral draw software

Roles and Responsibilities To monitor the total quality control of Ready Mix Concrete Plant Raw Material Testing Internal Mix Design Trails Customer communication site to site Basic SAP Knowledge is must Desired Candidate Profile B Tech - Civil with 5-8 years of experience in Ready Mix Concrete Plants Candidates with less experience will be considered for Executive Perks and Benefits Rs 40,000 / 50,000 depending on candidate experience Language Skills : Telugu and Tamil is mandatory Interested candidates please mail your CV to srinivas.v@a-mix.in - 6281976477 careers@arunachala.biz - 040-67751223 040-67751223 www.a-mix.in

*Conducting Experiment *Analysing Substance *Developing chemical processes *Adhering to Safety Guidelines *Team Collaboration Required Candidate profile Researching and developing new chemical processes or improving existing ones