265 Material Testing Jobs - Page 3

Review Quality Plan submitted by contractor and get it verified from strl Consultants and ensure the same followed at site. Review Architectural drawing along with structural & Services drawing and ensure all the Architectural Features and service requirement are in line. If found any discrepancies raise RFI and get the relevant details from consultant / designer before execution. Ensure the BOQ specification followed at site in the execution Review concrete Design mix and provide feedback if any discrepancy. Conduct trail mix for all grades of concrete and testing of cubes of in and continues the process till the end. Ensure calibration certificates for all applicable construction instruments and maintain MTC for all the applicable Constcruion materials. Ensure Construction material testing and maintain tracker with respect to all material. Site inspection of all structural elements on construction stage and provide feedback to Project lead on the contractors workmanship and issue site instruction if found deviation from the drawing. Maintain Construction checklist for all civil activities If site instruction is not closed, escalate to Constrictors management and covert the same as NCR (Non-Confirmation Report) Closing of NCR Maintain Site instruction & NCR tracker Lead periodical Quality Audit at site Qualifications BE/BTech Civil/ Construction management Core Competencies Quality review, Proactive and logical approach to identify and resolve quality issues. Communication and documentation

Roles and Responsibilities Conduct quality control activities on construction projects, including industrial buildings and infrastructure development. Implement strict Quality control at project site Ensure compliance with IS codes, material testing, and QAP requirements for concrete, soil, and other materials used in construction. Perform cube testing and other physical tests to verify product quality at site Collaborate with project teams to identify and resolve quality issues promptly. Maintain accurate records of inspections, test results, and certifications. Good knowledge about relevant IS codes in construction industry Preparing monthly QA/ QC MIS for the site Site quality control activities Material / Soil Testing procedures Keep all records as per ISO requirement

The role of QC Engineer is to ensure that all civil construction activities at the site adhere to quality standards set forth in project specifications, industry regulations, and internal quality systems. You will be responsible for monitoring work practices, conducting inspections, and documenting compliance to ensure the delivery of a defect-free project. Your key responsibilities will include conducting on-site inspections and tests on construction materials, workmanship, and processes. You will review and interpret construction drawings and technical specifications to ensure compliance. Additionally, you will prepare and maintain QC documentation such as Inspection Test Plans (ITPs), Quality Checklists, and Non-Conformance Reports (NCRs). It will be crucial for you to coordinate with site engineers and subcontractors to ensure timely and correct execution of work. As a QC Engineer, you will monitor and test the quality of various civil materials like concrete, steel reinforcement, soil compaction, and waterproofing. You will need to issue NCRs and ensure that corrective/preventive actions are implemented. Participation in internal and external audits, along with assisting in corrective action follow-up, will also be part of your role. Maintaining records of inspection results and quality-related documentation will be essential, as well as liaising with consultants, clients, and third-party testing agencies when required. Your role will also involve ensuring that construction activities meet safety, quality, and environmental standards. You will be expected to suggest improvements to site practices and quality procedures to prevent defects. Key Skills & Competencies required for this role include a strong knowledge of civil engineering standards, experience in material testing, familiarity with quality management systems, and the ability to read and interpret construction drawings and specifications. Proficiency in MS Office and QA/QC software tools, attention to detail, excellent documentation skills, strong communication and coordination abilities, as well as problem-solving and root cause analysis skills are essential. Preferred Qualifications for this role include certification in QA/QC or a related field and experience in large-scale infrastructure/building projects. This is a full-time job opportunity with benefits such as commuter assistance, provided food, and Provident Fund. The role requires a minimum of 2 years of experience in QA/QC, quality control, and quality assurance, along with proficiency in Tamil and English languages. The work location is in person.,

You will need to have at least 5 years of experience in Quality Assurance/Quality Control related to water infrastructure projects. A Bachelor's Degree in Civil Engineering is required for this position. Your responsibilities will include implementing and overseeing QA/QC protocols throughout all stages of the projects. You will be conducting on-site inspections to verify construction quality and ensure adherence to specifications. Additionally, you will be responsible for conducting material testing and validation in accordance with relevant standards. Maintaining accurate QA/QC documentation, records, and checklists will be a crucial part of your role. You will also be monitoring and ensuring compliance with technical specifications, as well as identifying any non-conformance issues and recommending appropriate corrective and preventive measures. If you are interested in this position, please submit your resume and a cover letter highlighting your relevant experience to hrdept@cstech.ai.,

Role & responsibilities : Note: Only for male candidates Note: Only candidates from engineering companies should apply. Shall be responsible for maintaining standard test templates for functional test plans, Shall be responsible for prepare daily, weekly, monthly, schedule for material QC to internal & external vendors , take prior confirmation of vendor for the same. Shall be responsible for issue rejection note on QC rejection and keep record in written, follow up till job approval Shall be responsible to maintain daily QA / QC report of vendor update to HOD. Shall be responsible for taking care of QA/QC documents of the entire project including certificates, calibration, lab reports, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents. Shall be responsible to maintain record in ERP, material rejection ratio, vendor performance graph on daily basis. Shall be responsible for Non-conformance, NCR and Site Instruction Shall be responsible for NC report & Corrective action report maintain Shall be responsible to understand drawing and update vendor for proper process of material as per drawing. Shall be responsible for tagging of QC ok with item code, date of inspection Shall be responsible to coordinate with related department for accelerate work Shall be responsible review of allotted work in checklist in prescribe format Shall be responsible discussed / understand /get approval of tolerance from design department. Shall be responsible for priority list maintain as per ergency. Shall be responsible to intimate in written & update in QC respective HOD/ department for further process after QC approval Shall be responsible for preserve all instrument of measuring, maintain & calibrate, take certificate if required. Shall be responsible intimate of update to vendor of material process Shall be responsible maintain semi finish QC up to minimum stock at vendor end & maintain checklist update every day. Shall be responsible for submit daily inspection report internal / External customer to HOD Shall be responsible to maintain all records as per ISO format. Shall be responsible for assisting with any additional tasks as assigned by the Company. Experience: 3 to 7 years (engineering industry)

Job Title Chemist (Posted 6 days ago) Job code : AGL101 Qualification Chemistry(B.sc/M.Sc/Equivalent) Department Quality Assurance Job Description - Prepare, test and compare experimental samples - Provide and maintain accurate data and records for raw material evaluations, new product and Research & Development - Follow basic lab safety guidelines and regulations - Take direction from supervisor and complete assignments in a timely manner Prepare samples using laboratory dispersion and blending equipment - Conduct standard tests following Standard Test Procedures including, but not limited to, viscosity, ICI, gloss, tint strength, density, pH, and scrub tests - Record and report test results - Report problems associated with test equipment or test processes - Maintaining test equipment and work area Required Skills - Ability to coordinate with team - Ability to organize and prioritize work for timely completion - Effective communication skills, both verbally and in writing - Able to easily understand complex instructions - Able and willing to maintain strict level of confidentiality regarding laboratory results and records - Minimum computer skills Job Location Tuticorin Pay Scale Based on experience Work Timings: 09.00 A.M - 06.00 P.M How to Apply?

Responsibilities & Key Deliverables The candidate will be tasked with leading a team of dedicated Metallurgical Engineers, focusing on critical aspects that drive the success of vehicle systems. Key responsibilities include: Finalising materials and manufacturing methods for all vehicle components, including Body-in-White (BIW), chassis, suspension systems, and fasteners. This is crucial to meeting key performance metrics regarding reliability, manufacturability, repairability, cost, and weight. Delivering technical expertise in failure analysis related to sheet metal forming, welding, and corrosion. Effectively identifying root causes and proposing suitable corrective actions is paramount. Assisting in vehicle system development programmes, including thorough supplier evaluations and audits, especially in areas such as chassis and suspension springs, knuckles, and wheel end components. Engaging proactively in the early design phases to guide design engineers with informed materials and process recommendations, accompanied by necessary trade-off studies. Creating and updating material property databases, particularly regarding variations and endurance strengths, to aid in engineering design analysis. Proactively revising material specifications and guidelines to align with current global standards, ensuring continued compliance and competitiveness. Developing strong relationships with material testing agencies both domestically and internationally to facilitate specific tests supportive of ongoing projects and programmes. Driving the integration of new technologies across materials, processes, and coatings to elevate performance standards. Continuously identifying potential value engineering proposals and cost reduction activities, particularly in areas like forging, casting, powder metallurgy, and heat treated components. Experience Candidates should possess between 4 to 6 years of relevant experience in metallurgical engineering. It is essential that they have hands-on experience with processes such as: Sheet metal forming Stamping Welding Corrosion resistance techniques Fastening methods Heat treatment processes Coatings and metallurgical testing Experience with castings and forgings will be viewed favourably, enhancing the candidates profile. Industry Preferred Preferred candidates will have a background in the automotive industry. This includes familiarity with the latest automotive materials technology trends and practices, ensuring a competitive edge in delivering solutions that meet modern automotive needs. Qualifications Applicants must hold a degree at the B.E/B.Tech or M.E/M.Tech level, specifically in Metallurgy or Material Science. This educational foundation is critical for understanding the complexities of materials technology and its application within the automotive sector. General Requirements General requirements for the role include: Excellent communication skills to articulate complex technical information to diverse audiences. A collaborative mindset, with a strong emphasis on teamwork and cross-disciplinary collaboration. Proactive problem-solving skills combined with the ability to think critically under pressure. A commitment to continual learning and professional development in the ever-evolving field of automotive engineering.

Responsibilities & Key Deliverables The candidate will be tasked with leading a team of dedicated Metallurgical Engineers, focusing on critical aspects that drive the success of vehicle systems. Key responsibilities include: Finalising materials and manufacturing methods for all vehicle components, including Body-in-White (BIW), chassis, suspension systems, and fasteners. This is crucial to meeting key performance metrics regarding reliability, manufacturability, repairability, cost, and weight. Delivering technical expertise in failure analysis related to sheet metal forming, welding, and corrosion. Effectively identifying root causes and proposing suitable corrective actions is paramount. Assisting in vehicle system development programmes, including thorough supplier evaluations and audits, especially in areas such as chassis and suspension springs, knuckles, and wheel end components. Engaging proactively in the early design phases to guide design engineers with informed materials and process recommendations, accompanied by necessary trade-off studies. Creating and updating material property databases, particularly regarding variations and endurance strengths, to aid in engineering design analysis. Proactively revising material specifications and guidelines to align with current global standards, ensuring continued compliance and competitiveness. Developing strong relationships with material testing agencies both domestically and internationally to facilitate specific tests supportive of ongoing projects and programmes. Driving the integration of new technologies across materials, processes, and coatings to elevate performance standards. Continuously identifying potential value engineering proposals and cost reduction activities, particularly in areas like forging, casting, powder metallurgy, and heat treated components. Leading a team effectively to achieve organisational goals, while fostering a strong culture of teamwork and collaboration. Experience Candidates should possess between 6 to 9 years of relevant experience in metallurgical engineering. It is essential that they have hands-on experience with processes such as: Sheet metal forming Stamping Welding Corrosion resistance techniques Fastening methods Heat treatment processes Coatings and metallurgical testing Experience with castings and forgings will be viewed favourably, enhancing the candidates profile. Industry Preferred Preferred candidates will have a background in the automotive industry. This includes familiarity with the latest automotive materials technology trends and practices, ensuring a competitive edge in delivering solutions that meet modern automotive needs. Qualifications Applicants must hold a degree at the B.E/B.Tech or M.E/M.Tech level, specifically in Metallurgy or Material Science. This educational foundation is critical for understanding the complexities of materials technology and its application within the automotive sector. General Requirements General requirements for the role include: Excellent communication skills to articulate complex technical information to diverse audiences. A collaborative mindset, with a strong emphasis on teamwork and cross-disciplinary collaboration. Proactive problem-solving skills combined with the ability to think critically under pressure. A commitment to continual learning and professional development in the ever-evolving field of automotive engineering.

: Creation/Revision/ Review of Specifications and Methods for Site Transfers and ANDAs Method Validation Protocol knowledge. Creation/Revision/ Review of Validation Repot for Drug substance, Excipients and Drug products. Initiate Change controls as necessary for: Method and specification revisions and stability Protocol Modules preparation for Drug substance and Drug product. Batch Analysis - 32S/32P Reference Standards - 32S/32P Characterization of Impurities - 32S/32P Justification of Specification - 32S/32P Facility Templates Stability Summary Reports for ACC, CRT & RT 5313 Reports (Dissolution Comparative test) QOS & Stability Overview - 32S/32P (If ANDA) To prepare vendor qualification report based on the performance of material at test. To prepare justification reports towards reduction of tests in Input material testing such as raw and packaging material; In-process testing; Finished product testing; Stability testing. Preparation/Review of SOPs Required Skills: Analytical method Validation documentation : Advanced Laboratory Instrumentation Knowledge : Intermediate Data Integrity (ALCOA+ principles) : Advanced CTD / eCTD Module Preparation (Primarily Module 3.2.S & 3.2.P) : Advanced Impurity Profiling & Justification : Intermediate Stability Profiling Knowledge : Advanced

Review and understand construction plans, specifications, and drawings. Participate in site investigations and data collection. Help prepare material estimates and cost calculations. Assist with obtaining permits and other necessary documentation. Attend pre-construction meetings and briefings. Monitor construction activities for compliance with plans and specifications. Perform basic quality control inspections of materials and workmanship. Identify and report any safety hazards or discrepancies to the Resident Engineer. Assist with surveying and setting out structures. Prepare and maintain progress reports and documentation. Coordinate with subcontractors and suppliers on logistics and deliveries. Assist with resolving minor issues and answering questions from workers. Assist with punch list items and final inspections. Prepare as-built drawings and documentation. Help close out project paperwork and contracts. Stay up-to-date on relevant building codes and safety regulations. Learn and use construction software and tools. Develop communication and teamwork skills. Contribute to a positive and safe work environment. Key Skills and Knowledge: Strong understanding of construction materials and methods. Knowledge of relevant building codes and regulations. Ability to read and interpret construction plans and specifications. Proficiency in quality control inspection techniques. Excellent communication and teamwork skills. Problem-solving and analytical skills. Attention to detail and commitment to quality. Immediate Joiners preferred.

oversee complex chemical experiments and analyses Develop new chemical formulations interpret data using various chemical analysis techniques adhesive formulations, and supporting product innovation for tile adhesives and related chemical products Required Candidate profile Good written and verbal communication in technical reporting and team collaboration Strong knowledge of chemical formulations, adhesive raw materials (e.g., RD powder, MHEC, polymer binders)

Site Visit - Detailed Drawing with applied Engineering Principles - Preparation of design documents, coordination and checking of detailed drawings - Pre Planning Process such as Cost Estimations, Budgeting - Manpower Planning - Establish Construction Schedules - Site Supervision: Quality of rawmaterials, Quality of construction, Adherence to Plan, Adherence to budgeted costing - BOQ - Managing On Site Construction Team - Coordinate with various internal and inter department team members and Heads of Department - Ensure proper design and layouts are being implemented to achieve safety, functionality and efficiency - Manage and Lead the team - Periodical Reports Excellent Knowledge of: - Compliance - Safety Standards and Regulations - Building Design Codes and standards - Testing Material - Testing Process as per standards and specifications - Autocad - MS Office Prior Experience in Villa Projects would be an added advantage Qualification: Degree in Civil Engineering

Job Title Chemist (Posted 3 days ago) Job code : AGL101 Qualification Chemistry(B.sc/M.Sc/Equivalent) Department Quality Assurance Job Description - Prepare, test and compare experimental samples - Provide and maintain accurate data and records for raw material evaluations, new product and Research Development - Follow basic lab safety guidelines and regulations - Take direction from supervisor and complete assignments in a timely manner Prepare samples using laboratory dispersion and blending equipment - Conduct standard tests following Standard Test Procedures including, but not limited to, viscosity, ICI, gloss, tint strength, density, pH, and scrub tests - Record and report test results - Report problems associated with test equipment or test processes - Maintaining test equipment and work area Required Skills - Ability to coordinate with team - Ability to organize and prioritize work for timely completion - Effective communication skills, both verbally and in writing - Able to easily understand complex instructions - Able and willing to maintain strict level of confidentiality regarding laboratory results and records - Minimum computer skills Job Location Tuticorin Pay Scale Based on experience Work Timings: 09.00 A.M - 06.00 P.M How to Apply

Overview candidate should have minimum experience of pick up or deliver boy, also he should know to pune and pcmc area. He can read and write english names. Tagged as: sample collection exe required for pune and pcmc are Before applying for this position you need to submit your online resume . Click the button below to continue. About Om Metalab Services Pvt Ltd. Om Metalab Services Pvt. Ltd is a renowned name in the metallurgy world for over decades. Providing with high standard material testing services. Over 3000+ customers trust Om Metalab as their go-to quality assured partner and availing Om Metalab s services to improve & certify their products, validate material quality, ensure innovation in the marketplace and to achieve significant competitive advantages.

Responsibilities: * Manage site operations & quality control * Ensure road construction meets standards * Conduct material testing & handling * Oversee civil engineering projects on-site

Key Responsibilities: Conduct purity analysis , TDS , pH , LOE testing Perform laboratory analysis and testing procedures. Operate and maintain lab instruments. Maintain 5S standards and ensure workplace safety. Assist in quality management system (QMS) practices. Required Skills: Good understanding of raw materials. Proficient in MS Office (Excel, Word, PowerPoint). Strong English communication skills (written and verbal). Fluent in the local language (Tamil preferred). Immediate joiners are highly preferred.

Responsibilities & Key Deliverables Responsibilities & Key Deliverables Ability to do raw material form / Drawing review and Approval. Ability to perform failure analysis. Ability to do reverse engineering & support to IMCR. Ability to solve metallurgical concerns and supplier process issues. Ability to suggest correct materials / alternative material to designer. Ability to work as a single window for all metallurgical / material related concerns. Ability to support and work for ELV implementation along with homologation & sustainability team. (1) Drawing - Understanding of engineering drawing & symbols. (2) Team centre - DR / RM Approval on Team centre. (3) Metallurgy Lab / Inspection - Expertise in metallurgy testing. (4) NTD - Expertise in NDT testing & methodology. (5) Material / Testing Standards - IS, ASTM, DIN, AISI, JIS, etc. Experience Industry Preferred Qualifications General Requirements Experience Expertise in Metallurgical testing - Knowledge of all Metallurgical testing equipment s & test procedures. (Ferrous / non-ferrous / Rubber / Plastic / Oil) Knowledge of Material and Testing standards, IS, ASTM, DIN, AISI, JIS, etc. Special Process Knowledge - Casting, Forging, Heat Treatment, Sheet Metal, Welding, Fasteners, powder metallurgy, Rubber, plastic, Plating and Painting. Heat Treatment - Knowledge of All Heat Treatment Processes. Expertise in Failure Analysis. Special process Improvement (ICA / PCA) & Supplier Development. Able to interpret engineering drawing & symbols. RTS (Review of technical specification) / DR / RM Approval on Team centre. Benchmarking / Reverse Engineering. Knowledge of ELV - Added advantage

Job Title: QC Head Qualification : Minimum BSc / MSc Or B Tech / M Tech in chemical Stream. Company Name : Navpad Pigments Pvt Ltd. Location: Rajpur, Near Chattral, Kadi, Gujarat Experience:15 Year experience as QC Head in Ink/Paint or Pigment Industries. Industry: Chemical Manufacturing Job Description: Planning & Execution of Daily QC and In process Lab Operation Activities for smooth and better work culture. Devise and Establish a company's quality procedures, standards and specifications Train and supervision the lab Technical person for quality ISO system, Instrument handling with proper guidance with best safety, health and environment practices. Review customer requirements and make sure they are met Work with purchasing staff to establish quality requirements from external suppliers Ensure all the products have clearly defined specifications with careful & sophisticated quality control measures in compliance to the international standards. Employ the use of various ultra-modern facilities & sophisticated instruments. Trouble shooting during in process checks to achieve Quality and Output. Participating to the pre-inspection or post supply meeting with suppliers wherever necessary. Established the process the Inward QC Lab activities. Responsible for Production planning as per Pending Orders Dispatch schedule and Stock Inventory. Coordinating with various departments such as Marketing and EXIM to issue export documents (MSDS & COA). Allotment of Finish Goods as per Orders, maintain finish goods stock and Prepare Monthly stock statement Quality wise. Provide Guidance to Lab Technical persons to prepare Product presentation for Customers and Marketing Department. Preparation Stability Test of Solvent Inks using Brookfield Viscometer (LVDV 3T Model No.) for customers. Coordinates in handling nonconforming/rejected products and its resolution. Performing in final packing inspection before product dispatch. Overall responsible for Finish goods Stock Management. Make sure that Dispatch schedule as per required & Maintain the Material Stock on FIFO and LIFO Basis. Planning for blending and packing of finish goods as per dispatch schedule and co-ordination with production and Marketing Department. Handling & manage the material sifting verify the physical stock at every day & To transfer material from quarantine area to release zone, rejected zone Instructs and guides the manpower base on SOPs to ensure the completion of activities related to material handling in finished goods and timely dispatch. Submit Monthly Stock statement to CEO of the company. Along with dispatch details, Handling Loss and Balance Finish Goods. Responsible to ensure the inventory control and to maintain the minimum level of inventory of Finish Goods Contact Details :9898033290 E mail m.barot@navpadpigments.com

Responsibilities: * Conduct lab tests on agrochemicals using lab chemicals * Prepare reports with accurate results * Maintain laboratory equipment and safety protocols * Collaborate with R&D team on material testing projects

1. Using laboratory equipment to perform tests on Construction Materials (Civil) to assess their physical and mechanical properties 2. Keeping laboratory equipment and facilities clean, calibrated and safe Required Candidate profile We are looking for a candidate who can possess Accurately recording and analyzing test data to ensure quality control Keerthana HR 9384033272

Vantive : A New Company Built on Our Legacy Since last year, we has been on a journey to separate our Kidney Care segment into a standalone company. Vantive will build on our nearly 70-year legacy in acute therapies and home and in-center dialysis to provide best-in-class care to the people we serve. We believe Vantive will not only build our leadership in the kidney care space, it will also offer meaningful work to those who join us. Each of us are driven to help improve patients lives worldwide. Join us as we revolutionize kidney care and other vital organ support. Job Summary Job Title - Sr Eng, Containers Lab Location - Whitefield, Bangalore Shift - General Job description: Participate in a variety of projects by conducting testing, designing experiments, independently developing / evaluating / validating and/or transferring methods. Analytical point of contact for complex and/or large size projects. Support the verification and validation tests (NPD & SPO) across the different business units. Ensures that the lab team is in compliance with good laboratory and documentation practices. Critically and independently review, understand and interpret test protocols, testing plans to verify product requirements and final reports. Excellent knowledge of ELN functionality. Responsible for the coordination of samples in the lab for the assigned projects. Coordinate team to keep an organized workplace (according to 6S standard). Maintain a safe and orderly work environment. Identify and prevents hazards which could result in injuries or accidents. Support the lab team and critically contribute to investigation, brainstorming and troubleshooting related to laboratory activities. Clear knowledge and understanding of the lab operating mechanism Testing set up development, good understanding of test set up requirement when coordinating with supplier. End to end ownership on the equipment purchase. Assist, manage and execute various lab related projects. Be innovative with new technologies on test methods and on test equipment. Identify areas of improvement in Lab processes. Design protocols and interprets results to validate functional test methods. Design, printing and testing of new small tools Qualifications Masters / Bachelors degree in Material Science, Polymer Science/Engineering or related fields with 6+years industrial work experience in the Material testing experience in Medical device domain. Basic computer skills (MS Office Word, Excel, PowerPoint, etc.) plus Empower, electronic lab, notebook, and Minitab. Experience with cross functional/cross regional projects. Execution-focused for planning/tracking/anticipating and mitigating risks/challenges. Critical thinking, innovative mindset, curious, with demonstrated learning agility. Team Player and active participation in the technical forums.

As a qualified candidate for this position, you will be responsible for various tasks related to material testing, mix design up to M80 Grade, concrete pumping in high-rise buildings, as well as possessing knowledge of RCC and finishing. Proficiency in SAP/ERP will also be essential for this role. To excel in this role, you should hold a qualification of BE in Civil Engineering and have a minimum of 5 years of experience in the quality department of a real estate company, particularly in high-rise projects. It is crucial that you have a strong understanding of SAP/ERP systems to effectively carry out the responsibilities of this position.,

Job Summary: We are seeking a dedicated Laboratory Technician to support our construction team with material testing, quality control, and laboratory analysis. As a Laboratory Technician, you will be responsible for performing tests on construction materials (such as soil, concrete, asphalt, and aggregates) to ensure they meet the required specifications and standards. You will work closely with engineers, project managers, and site teams to ensure the quality and safety of construction materials used on site. Key Responsibilities: Material Testing & Analysis: Perform routine and specialized tests on construction materials, including concrete, asphalt, soil, and aggregates. Conduct tests according to standard procedures and report results accurately. Ensure that all materials are tested in compliance with local building codes, safety standards, and project specifications. Quality Control & Assurance: Assist in the development and implementation of quality control procedures and protocols for materials testing. Monitor and ensure the consistent quality of materials used in construction, providing feedback to project teams on findings. Conduct regular inspections of lab equipment, ensuring it is maintained and calibrated to meet industry standards. Sample Collection & Preparation: Collect material samples from construction sites, suppliers, and storage areas as required. Prepare and process samples for testing, including mixing, conditioning, or molding materials as necessary. Data Management & Reporting: Record and document test results, making sure they are accurate, clear, and consistent with project specifications. Prepare detailed reports on test results, including findings, recommendations, and deviations from standards. Communicate test results and findings to engineers, site managers, and other project stakeholders. Safety & Compliance: Ensure that all laboratory and field testing activities are carried out in accordance with health and safety regulations. Maintain a clean, organized, and safe laboratory environment. Follow and enforce proper waste disposal practices for hazardous materials used in testing. Collaboration & Communication: Work closely with project managers, engineers, and other team members to ensure that construction materials meet the necessary quality standards. Provide technical assistance in material selection, testing, and problem-solving when required. Qualifications: Education: A diploma or associate's degree in Civil Engineering, Construction Materials Technology, or a related field. Additional certifications or training in laboratory testing or quality control is a plus. Experience: 1-3 years of experience in a laboratory or quality control role, ideally within the construction or civil engineering industry. Familiarity with material testing procedures for concrete, soil, asphalt, and aggregates. Skills: Basic knowledge of construction materials and their testing methods. Proficiency in using laboratory equipment and tools such as compression testing machines, sieves, and moisture meters. Ability to follow standardized testing procedures and maintain accurate records. Familiarity with construction standards and industry regulations (e.g., ASTM, AASHTO). Soft Skills: Strong attention to detail and analytical skills. Good communication skills to report findings to engineers and other team members. Ability to work independently and manage time effectively. Strong organizational and problem-solving skills.

We are seeking a detail-oriented and analytical Quality Engineer to join our team. The ideal candidate will be responsible for ensuring that products and processes meet established quality standards through effective planning, monitoring, and continuous improvement initiatives. You will collaborate with cross-functional teams to identify root causes, implement corrective actions, and drive quality improvements throughout the organization. Role & responsibilities 1. Pre-Delivery Checks Mix Design Approval: Confirm the concrete mix design is approved and matches the project specification (e.g., M20, M25). Raw Material Quality: Verify the quality and test reports of cement, aggregates, water, and admixtures. Batching Plant Audit: Inspect calibration of batching plant, weigh scales, and proper storage of materials. 2. During Delivery (Transit Mixer) Slump Test: Ensure workability using a slump cone test . Temperature Check: Measure concrete temperature Transit Time: Confirm concrete is poured within 90 minutes from batching. Visual Inspection: Check for segregation, consistency, and homogeneity. 3. On-Site Tests Cube Casting: Take 6 cubes per batch (commonly) for compressive strength tests (e.g., 7-day, 28-day). Slump Recheck (if delay): Perform another slump test if concrete is delayed. Placement Supervision: Ensure proper pouring, vibration, and compaction. 4. Post-Pouring Curing Check: Monitor curing methods Cube Testing: Ensure lab tests are done on time and results recorded. Documentation: Maintain batch tickets, test reports, delivery notes. 5. Segregation A Quality Engineer Should be able to identify the causes like excessive vibration , high slump, improper handling. Recommend the preventive measures like correct batching , proper transportation , placement techniques . Inspect for segregation during pouring and compacting . Ensure corrective actions are taken if segregation is observed . Preferred candidate profile . Bachelors degree or above in Civil Engineering or related field . Demonstrated experience in a similar role . Excellent computer skills, previous experience with project management software . Strong analytical skills, with keen attention to detail . Strong communication skills, both written and verbal . Able to work to agreed deadlines and timescales . Demonstrated knowledge of health and safety guidelines . Good problem-solving abilities

Job Description Summary Lab Specialist/Technician Performs the designated tasks and specific duties within the aerothermal lab by complying with the lab processes procedures and lab in-charge instructions. Mainly he/she must adhere to all the lab safety protocols without compromising on safety. This individual roles & responsibilities include operating the Test rigs/ Lab equipment for testing maintaining the lab equipment and acquiring the test data /stamping during the lab testing. Roles and Responsibilities: As a lab Specialist/technician for Materials Testing the candidate would be responsible on the below areas (but not limited to) Responsible for daily operations of the mechanical/Creep testing lab equipment ensuring all processes are conducted safely and efficiently. Will support day to day lab operations by adhering to the lab related procedures protocols and best practices. Maintain a safe working environment by adhering to all relevant health and safety regulations and protocols. Implement safety measures and conduct regular safety audits to ensure compliance. Follow quality control procedures to ensure high standards are maintained in laboratory testing and spray coating processes. Work on safe operation procedures and ensure it is adhered by the team/operators. Monitor and evaluate laboratory results for accuracy and reliability document the data and record keeping. Responsible for design and construction of test facilities test rigs instrumentation systems. Ensure proper maintenance and calibration of laboratory equipment to ensure optimal performance. Coordinate with vendors for equipment servicing and repairs as needed. Resolves issues using established procedures. Consults supervisor or more senior team members for issues outside of defined instructions/parameters. Encourage continuous learning and development within the team; identify gaps in skillsets for training needs. Collaborates with others to solve the lab operational issues. Exchanges technical information asks questions and checks for understanding. Required Qualifications Candidate must have graduate degree in engineering/diploma in Mechanical Mechatronics or equivalent from a reputed Institute or University. Must have a minimum working experience of 3 years in the relevant field. Candidate should possess knowledge of industrial safety processes for fire chemical electrical compressed gases and the LOTO procedures. Candidate should have hands-on knowledge/experience in testing operations (UTM Fatigue Pressure Vessels Thermal Spray systems etc.) Candidate should have hands-on experience in the assembly/ dis-assembly process of the rig mounting and dis-mounting and instrumentation. Knowledge on EOT/ Gantry cranes and forklifts. Candidate must be familiar with Microsoft Office tools including power point excel word outlook and teams. Candidate should be able to understand the Engineering drawings and should have worked on modeling tools like Unigraphics AutoCAD etc. Candidate has basic knowledge on PLC controls and process. Candidate must be ready to operate in shifts and needs to travel to Customer site for field testing anywhere within the country or outside of the country if required (~10% travel). Desired Characteristics Demonstrated initiatives in proactively identifying future potential safety risks and suggesting appropriate countermeasures. Ability to read understand interpret and apply applicable safety (EHS) regulations to comply with rig/ site requirements. Proficiency with testing methods and quality related tools including six sigma initiatives