172 Material Inspection Jobs

Daily Quality Supervision: Lead on-site quality control for all construction execution activities, ensuring 95%+ compliance with drawings and specifications Real-time Monitoring: Conduct continuous quality checks during concrete pours, structural work, and finishing activities Execution Quality: Ensure all construction activities meet tolerance requirements with zero major non-conformance. Site Documentation: Maintain comprehensive daily quality records and inspection reports for management review Material Inspection & Testing Activities:- Material Inspection Leadership: Oversee all incoming material inspection and approval processes with 100% compliance to specifications TMT Bar Testing: Lead comprehensive TMT bar testing (mechanical, chemical, grade verification), ensuring zero material acceptance deviations Concrete Quality Control: Monitor daily concrete operations, conduct slump tests, cube testing, and maintain standard deviation within prescribed limits Testing Coordination: Coordinate with external laboratories for material testing and ensure timely report submission within 24-48 hours Construction Quality Assurance:- Structural Quality: Review reinforcement placement, check cover blocks, and verify BBS implementation with a 2-3mm accuracy tolerance Formwork Supervision: Oversee formwork installation, check alignments, levels, and ensure floor-to-floor tolerance compliance Foundation Quality: Monitor excavation, foundation laying, waterproofing, and backfilling activities, ensuring specification adherence MEP Coordination: Ensure quality standards for mechanical, electrical, and plumbing rough-in work during construction phases. Site Process & Compliance Site Process Compliance:- Quality Process Implementation: Implement site-specific quality procedures and ensure 90%+team adoption across all trades Regulatory Compliance: Ensure adherence to IS codes, local building regulations, and DTC Group quality standards Non-conformance Management: Identify, document, and resolve quality issues before they impact project timelines. Contractor Coordination: Work directly with contractors to maintain quality standards and resolve execution issues on-site. Site Location: https: / / maps.app.goo.gl / vLr7PU3N3A4UE95bA (Azad Sangha Moydan, 68, Badu Rd, near Abdalpur, Madhyamgram, Kolkata, West Bengal 700155)

Site Inspection - IOCL Should know about construction, design & Quality Standard Review structural drawings, estimates, BOQs & project schedules Knowledge of Quality inspection Maintain documentation

As a Logistics Coordinator at our company, your role will involve the following responsibilities: - Follow up with transport agencies and suppliers to ensure timely delivery of materials. - Incorporate product quality specifications into purchases to maintain high quality standards. - Conduct material inspections and documentations, including making quality sheets for material checks. - Coordinate inter and intra-department activities and follow up on various tasks. - Manage the process of returning rejected materials with complete formalities. - Arrange way bills from the Accounts Department and communicate with vendors. - Handle documentation, MIS updation, and Tally ERP tasks, including making purchase orders, comparing quotations, and completing import/export documentation. Qualifications: - B.Tech in Mechanical Engineering or Automobile. - 0-1 year of experience required. Please note that this is a full-time, permanent position suitable for freshers. In addition to a competitive salary, you will also be entitled to benefits such as health insurance and Provident Fund. The work location for this role is in person.,

Job Title: Expeditor Heavy fabrication projects Location: Delhi/NCR / Pune Department: Fabrication BU - Project Management Reports To: Expediting head Job Summary: Venwiz Technologies Private Limited is seeking an experienced and proactive Expeditor to oversee the timely progress and completion of fabrication projects at vendor locations. This role will be part of the expediting team in the Fabrication Business Division. The ideal candidate should have high energy to drive for results and will be responsible for expediting suppliers at their workshop locations, updating the system, monitoring inspections, maintaining OTD reports, tracking bought-out items (PO s) for the assigned jobs. This role is for heavy equipment fabrication requirements, majorly involving higher thickness plates. Sheet metal experienced candidates should not apply Ability to work under tight deadlines and should have good communication skills. Candidate should be able to face clients in regular review meetings Key Responsibilities: 1. Planning: Perform meticulous study of all drawings and BOM to understand manufacturing processes, quality requirements and specification. Understand manufacturing plan and validate for the completeness and accuracy Identify long lead and critical items Should Be Able to Analyse Preparatory, Welding and Fitment Quantums 2. On Ground Expediting: Monitor and track all project stages—from raw material (RM) ordering to final dispatch. Create and track daily/ weekly plan on the shopfloor and ensure the manufacturing progress is achieved as per plan Identify risks/ potential failure points in achieving production and plan for mitigation Work closely with internal teams, client teams and vendors to ensure timely completion of each stage. Understand quality points from QAP and ensure adherence to the same during manufacturing stages Raise timely alerts with reporting manager as well as client teamso Update the progress in the expediting digital solution (candidates are required to undergo hands on training for the same) Identify and resolve issues related to machines, equipment, quality, processes, manpower or technical expertise. 3. Inspection : Closely monitor the stage inspection tests and interpret the test results If need arises, candidate should be able to conduct tests himself occasionally Qualifications & Skills: Diploma/ Bachelor’s degree in Mechanical Engineering, Industrial engineering or a related field. 5 years of experience in project expediting / manufacturing / production / quality in the heavy fabrication domain with exposure to equipment manufacturing Strong understanding of manufacturing processes such as welding, rolling, bending machining, blasting, manual assembly, painting etc. Certifications like NDT level 2, IPMA are preferred. Ability to manage multiple projects simultaneously. Willingness to travel to vendor locations as needed. candidates with Quality/Organizational Excellence (CMQ/OE) OR ISO 9001 Quality Management Systems Lead Auditor Certification will be preferred but not mandatory Benefits: Competitive salary and performance-based incentives. Opportunity to work in a dynamic and growing organization. Travel allowances and professional development opportunities. Career Progression through systematic appraisal process If you are a detail-oriented professional with a passion for ensuring timely project execution, we invite you to apply and be a part of our innovative team at Venwiz Technologies Private Limited.

Job description Role & responsibilities 1. Able to identify raw materials and co-relate traceability with mill certificates. 2. Able to witness laboratory tests (Mechanical, Chemical, Hardness etc.) 3. Able to inspect Groove Welding as well as Fillet Welding thoroughly. Conversant with all welding gauges & instruments. 4. Able to check individual structures (segment of shell, columns, beams , bracings, girders) 5. Able to Check Leveling, Control Assembly Dimension of Structures , Shells etc. 6. Inspector should have minimum NDT Level-II and able to witness VT, PT, MT, UT & RT respectively. 7. Able to check welding procedure & qualification records. Preferred candidate profile 1. Should be able to make photo report of daily / weekly progress and well conversant in MS Office (especially MS Excel Word). 2. Should be conversant with monitoring progress through progress line on schedule bar chart. 3. Should be young and energetic (Age - between 30 to 45 Years preferably). 4. Daily & Weekly Consolidated Reporting 5. Daily Report / Flash report to be submitted at the end of the day / latest within next days morning. weekly report to be submitted by end of each week. 6. All the reports / information to be shared with PIC without fail. 7. All the discussions / deviations / planning between Inspector / Expeditor and Vendor should be shared with PIC for concurrence. 8. Any deviations / anomalies observed to be discussed with PIC and decision to be conveyed after concurrence. Perks and benefits Perks and benefits as per the industry standards

Overview: The Quality Control Engineer is responsible for monitoring, evaluating, and ensuring the quality of construction materials, processes, and activities across the project lifecycle. This role involves implementing quality assurance and control procedures, performing site inspections, conducting material tests, and ensuring that the construction work complies with all relevant standards, specifications, and regulations. Key Responsibilities: 1. Quality Control Management Develop and implement quality control procedures and standards for the construction project. Conduct regular inspections to ensure that work performed meets the established quality standards. Review construction plans, blueprints, and specifications to ensure they align with required quality standards. Ensure all materials and processes used in construction are compliant with project specifications, safety regulations, and industry standards. 2. Material Inspection & Testing Inspect construction materials (e.g., concrete, steel, aggregates) for compliance with project specifications. Coordinate and oversee the testing of materials (e.g., compressive strength tests, soil tests, asphalt tests) to ensure they meet the required quality standards. Review test reports and recommend corrective actions if any material does not meet the specifications. 3. Inspection & Documentation Perform site inspections during different stages of construction to monitor quality and progress. Prepare and maintain detailed records of inspections, testing, and quality control activities. Document non-conformance issues (NCRs) and collaborate with the construction team to implement corrective actions. Create and maintain logs of inspection reports, test results, and other quality-related documents. 4. Non-Conformance Management Identify, report, and track non-conformance issues related to construction activities or materials. Work with the project team to investigate the root causes of non-conformances and develop corrective and preventive action plans (CAPAS). Ensure that all NCRs are properly addressed and documented. 5. Collaboration & Support Work closely with project managers, site engineers, and contractors to ensure complice with quality control procedures. Provide technical support and guidance to the construction team regarding quality issues. Review and approve subcontractor and vendor quality plans, ensuring they align with the project's quality standards. 6. Compliance & Safety Ensure that quality control procedures adhere to safety regulations and do not compromise the safety of workers or the public. Ensure all materials, activities, and processes meet the environmental and safety standards as required by law and the project specifications. Participate in site safety audits and quality-related safety inspections. 7. Reporting & Quality Reviews Prepare regular quality control reports and present them to senior management or the project team. Conduct quality reviews and audits to ensure that the project is on track and that quality standards are maintained throughout the construction process. Provide recommendations for improvements in construction processes and materials based on inspection findings. 8. Continuous Improvement Identify areas for improvement in quality control processes and propose new methods or techniques to increase efficiency. Encourage a culture of quality and continuous improvement across the site workforce. Participate in training sessions to improve quality control knowledge and practices. Qualifications & Requirements: Bachelor's degree in Civil Engineering, Construction Engineering, or a related field. 2-5 years of experience in quality control or quality assurance in the construction industry, with exposure to large-scale construction projects. Skills: Strong knowledge of construction materials, methods, and industry standards. Proficient in quality management techniques and tools (e.g., inspection plans, non-conformance reports). Ability to read and interpret technical drawings, blueprints, and specifications. Strong analytical and problem-solving skills. Excellent attention to detail and organizational abilities. Good communication and interpersonal skills, with the ability to work effectively in teams and communicate with all project stakeholders. Certifications: Certification in Quality Control (e.g., ISO 9001, Six Sigma) or relevant quality assurance qualifications. Knowledge of construction safety standards and certifications (e.g., OSHA, CSCS) is a plus. Mandatory Key Skills construction,site engineering,soil,quality control management,vendor quality,inspection,software testing,material inspection,construction projects,quality management*,construction design*,quality assurance*,quality control*,civil engineering*

Job Summary Following Safety department guideline on each and every activities and adherence to it very strictly. Escalating safety issues to respective Safety incharge / Warehouse incharge & Quality Manager. Wearing appropriate Personal Protective Equipment during activities carried out. Packing Material Inspection, Supplier Visit, Audit & Providing Training, Support to new vendor development. Monitoring Packing material cleaning process. Sampling & Analysis of Chemical Inward Visual inspection of Repacked products, Label before dispatch. Preparation and issue of test report. Controlling rejection from customer ( zero rejection) Preparation of Purchase Order & Purchasing of Chemicals required for Laboratory Analysis. Support to handling customer complaint & resolving queries within time limit Assisting Sales & Marketing on Customers Technical queries. Control and Supporting to Sales & Marketing for Liquidation of Colour / Non-Moving Material. Training to Supervisors , Contract workers on SOP & Day to Day Activities. Ensuring the Labels & Its content for Repacking Products. Sending Reports to Management ( Daily, WIG, JC & Other reports as & when required.

Responsibilities: * Conduct regular material inspections for plants * Collaborate with site teams on quality control measures * Ensure safety compliance at all times * Oversee quality checks on projects

Responsible for ensuring the quality and safety of a project. Preparing QA/QC plans for new construction and refurbishment, and establishing quality procedures.Conducting daily inspections and tests & monitoring construction activities for compliance Required Candidate profile Only those candidates should apply who have experience in building projects. concrete temperature plan Knowledge of highest grade of concrete like M 60 to M 80 Batching Plant Executio

Responsibilities: * Ensure compliance with quality standards during material inspections * Collaborate on third party inspection processes * Conduct thorough inspections using Vernier, height gauges and other inspection instruments Provident fund

Overseeing the execution of interior works on-site .Maintaining high standards of quality and ensuring the design specifications. Collaborating with architects ensure that the work aligns with the overall design vision & meets client expectations.

Job Description Summary The NDT Engineer is responsible for executing and improving Non-Destructive Testing (NDT) processes for wind turbine blade components. The role includes hands-on inspection, process control, data analysis, and supporting production teams to ensure blade integrity and compliance with standards. Job Description Key Responsibilities: Perform NDT inspections using methods such as UT (Ultrasonic Testing), based on certification. Interpret and evaluate test results in accordance with applicable standards, codes, and specifications. Prepare and maintain accurate inspection reports and documentation. Ensure all work is performed in compliance with company quality systems and HSE requirements. Assist in calibration and maintenance of NDT equipment. Coordinate with production, quality, and engineering teams to ensure timely inspection. Report and escalate any non-conformities or quality issues found during inspection. Support audits and participate in continuous improvement initiatives. Adhere to safety protocols, including use of PPE and safe handling of materials. Responsible for health, safety & environmental aspects & impacts. Identify near misses, unsafe conditions, unsafe acts & report to immediate supervisor. ASNT Level 1/Level 2 NDT UT certificate with relevant experience Ensure quality standards are maintained during the process by adhering to work instructions. Meet the shift production plan with optimum resources in terms man & materials. Tracking of cycle time, manpower & control their absenteeism & leaves. Track raw materials & consumables usage & plan to optimize the same. Coach team members how to perform their roles. Identify the training needs for members by practical evaluation on job. Perform tasks consistently to the Work Instructions, monitor adherence, and ensure that corrective actions are taking place. Monitor daily 5s & ensure people discipline in terms of PPE adherence. Lead DMS for daily updates & issues if any. Drive to meet requirements of standard cycle time and man hours to drive the team effort in production. Coordinate with the other support functions for any issues & pull them for resolution. Initiate and implement shop floor level improvements in work practice, productivity, and quality. Promote and support implementation of improvement ideas in the allocated area of work. Qualifications & Experience: B. Tech / B.E. in Mechanical Engineering or equivalent. Minimum 3-7 years of hands-on NDT inspection experience in [industry e.g., wind turbine blades, power plant, aerospace, oil & gas]. Valid NDT Level II certification in UT as per ASNT SNT-TC-1A / ISO 9712. Knowledge of applicable codes and standards (ASTM, ASME, ISO, etc.). Experience with composite material inspections is a plus. Familiarity with quality systems and reporting tools. Skills & Competencies: Strong attention to detail and analytical skills. Ability to interpret technical drawings and inspection standards. Good communication and teamwork skills. Proficient in MS Office (Excel, Word, Outlook). Ability to work independently and manage multiple tasks. Work Environment: On-site / field inspections may be required. Physically fit to perform manual tasks and operate inspection tools. Willing to work in shifts and on weekends, if required. Additional Information Relocation Assistance Provided: Yes

Job Description Summary The NDT Technician is responsible for performing non-destructive testing (NDT) on components and assemblies using approved techniques to detect and evaluate flaws that may affect safety, reliability, or performance. The technician must ensure compliance with applicable codes, standards, and internal procedures while maintaining detailed inspection records. Job Description Key Responsibilities: Perform NDT inspections using methods such as UT (Ultrasonic Testing), PT (Penetrant Testing), MT (Magnetic Particle Testing), RT (Radiographic Testing), and VT (Visual Testing), based on certification. Interpret and evaluate test results in accordance with applicable standards, codes, and specifications. Prepare and maintain accurate inspection reports and documentation. Ensure all work is performed in compliance with company quality systems and HSE requirements. Assist in calibration and maintenance of NDT equipment. Coordinate with production, quality, and engineering teams to ensure timely inspection. Report and escalate any non-conformities or quality issues found during inspection. Support audits and participate in continuous improvement initiatives. Adhere to safety protocols, including use of PPE and safe handling of materials. Qualifications & Experience: Diploma in Mechanical Engineering or relevant discipline. Minimum 2-5 years of hands-on NDT inspection experience in [industry e.g., wind turbine blades, power plant, aerospace, oil & gas]. Valid NDT Level II certification in one or more methods (UT, PT, MT, RT, VT) as per ASNT SNT-TC-1A / ISO 9712. Knowledge of applicable codes and standards (ASTM, ASME, ISO, etc.). Experience with composite material inspections is a plus. Familiarity with quality systems and reporting tools. Skills & Competencies: Strong attention to detail and analytical skills. Ability to interpret technical drawings and inspection standards. Good communication and teamwork skills. Proficient in MS Office (Excel, Word, Outlook). Ability to work independently and manage multiple tasks.

One Posts. Nashik based Reporting to Assistant Stores Manager. An Graduate with 8 years work experience in Engineering industry. Responsible for effective working of stores function which involves planning of day to day activities and coordination with inward quality control function for incoming raw materials and out going finished products, verification of MIS reports, reconciliation and stores procedures by of daily implementation important aspect involves interacting with division Purchase to ensure no excess inventory stock out and represent stores function in intra department scheduled meetings. Must be proficient in ERP given operations, apart from MS word and Excel software. Persons living close by, agreeing for flexible working hours will be preference. Permanent vacancy with expected association of five years. Competency in ERP software will be an added advantage.

Ensure construction quality by implementing standards, inspecting materials, and supervising site activities. Manage documentation, testing, NCRs, and coordinate audits and quality reporting.

The role of a Storekeeper in this construction site involves a range of key responsibilities to ensure the efficient management of materials. Your main duties will include receiving and inspecting incoming materials, verifying quantities and quality, and organizing materials in a safe manner. It will be crucial for you to maintain accurate records of material issuances, conduct regular stock checks, and prepare inventory reports. As a Storekeeper, you will need to monitor material usage, identify potential shortages or overages, and assist in the preparation of material requisitions. Coordinating with suppliers for material deliveries and ensuring adherence to safety regulations on the construction site are also important aspects of the role. Maintaining a clean and safe working environment in the storage area and reporting any safety hazards or concerns promptly will be expected. To qualify for this position, you should have a High School Diploma or equivalent and at least 2-3 years of experience as a Storekeeper or in a similar role on a construction site. Proficiency in basic computer skills, including Microsoft Excel and inventory management software, is required. Strong communication skills in English and Hindi, the ability to work independently and as part of a team, and GCC experience are essential. A valid GCC driving license is also a must. This is a full-time position that offers the opportunity to contribute to the smooth functioning of material management in a construction environment. If you meet the qualifications and are ready to take on these responsibilities, we encourage you to apply for this role.,

BE (Mechanical) with 8 + years of relevant experience in welding functions in Heavy Engineering or Fabrication Industries. ASNT Level II Certificate with Good Knowledge of NDT Techniques Qualified Welding Engineering Course will be added advantage Familiar with related codes and standards as En-codes and ASME Sec VIII Div. I, Sec.II, Sec.V, Sec.IX, ASME B 31.3 NS BIS standards. What Will You Do? Prepare PWPS, WPS and get approval from TPI. Arrange material (base plate and welding consumable) to qualify PQR. Coordinate with Lab for testing of Welded test Coupons. Coordinate with TPI to approve WPS & PQR. Qualification of welder /welding Operator. Training of welders /welding operators. Monitoring of consumable stock for proper planning. Monitoring of backing and holding of electrode and flux ovens. Visual inspection of weld and update in JHC. Prepare weld book and get approval form TPI. Coordinate with NDT to prepare report of weld repair percentage. Arrange documents to QC for compile MDR. Coordinate with production to control weld repair. Coordinate with production to get done PTC as per requirements Coordinate with store for inward material inspection. Coordinate with TPI for witness of test coupons in outside lab. Inspections at Vendor Place Review of lab testing invoices Responsible for implementing & maintaining records as per IMS and ASME

Job Purpose Assisting Store officer in day to day Store activities and maintain appropriate data of stocks and material. Job Context & Major Challenges Job Context: In line with its strategy of growing aggressively in the contract coal mining sector, the Mining Business has been exploring various opportunities. RCML been awarded a contract by Eastern Coalfield Limited, a subsidiary of Coal India Limited. To complement the requirement generated by the expansion plans of a public sector power generation company, this subsidiary of CIL is compelled to increase the capacity of one of its existing mines to reach a peak production level of 18. 7 MTPA. This is an open cast operational mine located in Godda district in Jharkhand. The Mining Business has registered a Company i. e. Rajmahal Coal Mining Ltd. to facilitate the commencement of operations. As per the contract the initial duration of the project is 12. 5 yrs which is now extended up to 2029. Job Challenges: 1)Store Management of HSD: High Speed Diesel which used as the fuel in the HEMM equipment for mining. 2)Maintaining timelines in-order to facilitate end users 3)Ensure no pilferages and theft occurs 4)Wastage control Key Result Areas KRA (Accountabilities) (Max 1325 Characters) Supporting Actions (Max 1325 Characters) KRA1 Inventory Control a)Maintaining records of HSD & other goods ordered and HSD Good received b)Informing and reminding user of the stock status c)Control over wastages of material d) Material issue against requisition slips. e) Material received based on delivery challan/ Invoice with match according to PO f) Prepare OSRD items g) Material inspection with user department and after shift in store at specific place KRA2 Safe and appropriate storage a)Responsible for store arrangement as per usage. b)Ensure safety measures are taken for materials stored a) Responsible for checking and validating storage security KRA3 Stock Verification a)Responsible for physical stock verification on day to day basis b)Checking of GRN and releasing the same on time with Validated stamp c)Cross checking of Challans, invoice and PO KRA4 Maintenance of Records & MIS a) Ensuring proper filing of PO and work order issued by commercial manager b) Coordinating with commercial Manager regarding inventory issues. c) Prepare MIS and reports stocks on day to day basis and submit to officer stores.

As a Material Coordinator, your primary responsibility will be to check materials and documents upon arrival and inform the designated user for material inspection during unloading. You will be expected to prepare Goods Receipt Notes (GRN) on a daily basis and coordinate with the Purchase Department regarding any missing documents or necessary amendments in Purchase Orders (P.O.). Additionally, you will be responsible for sending material arrival intimation emails to all departments, submitting invoices to the finance department daily, and tracking GRNs, Service Invoices, and Purchase Invoices. It will also be part of your duties to maintain all records of prepared/pending GRNs and ensure timely submission of invoices. Furthermore, you will be involved in the overall management of store activities, inward and dispatch processes, and familiarity with SAP software will be advantageous in carrying out your responsibilities effectively.,

The Stock Keeper position at Deva Steels in the manufacturing industry involves managing and overseeing the inventory of raw materials and finished goods. Your responsibilities will include receiving, inspecting, and storing incoming materials, maintaining accurate stock records, issuing materials based on requisitions, and ensuring adherence to safety and inventory control procedures. You will be expected to conduct regular stock checks, cycle counts, and physical inventory to guarantee stock accuracy, monitor inventory levels, and report any shortages or discrepancies to your supervisor. Additionally, you will be responsible for proper labelling, handling, and storage of goods to prevent damage or loss. This is a full-time, permanent position with benefits such as cell phone reimbursement, leave encashment, and Provident Fund. The work schedule includes day shift, fixed shift, and morning shift. In addition to the base salary, there are opportunities for quarterly and yearly bonuses. The work location for this role is in person.,

The Sales role involves the following responsibilities: Identification of Sales & Construction Leads: You will be responsible for identifying potential sales and construction leads. Sourcing of Data: You will gather data from various sources to support the tele-calling team and bulk message activities. Brand Promotion: You will handle brand promotion and generate enquiries through both Above The Line (ATL) and Below The Line (BTL) activities within the budget set by management. Pre Sales Closing: This involves conducting site visits to potential customers, closing leads, and issuing quotations in consultation with the management and legal team. Pre Sales Service: You will collect installments from clients, inspect material orders and deliveries physically, and manage the procurement of vendors and quotations. This is a Full-time, Permanent position with benefits such as Provident Fund. The work schedule includes Day shift, Fixed shift, and Morning shift. The work location is in person.,

As a Quality Engineer, your role will involve developing and implementing quality control systems to ensure the highest standards are met. You will be responsible for monitoring and analyzing quality performance, inspecting and testing materials, equipment, processes, and products to meet quality specifications. Your expertise will be essential in developing corrective actions, solutions, and improvements for continuous quality enhancement. Additionally, you will review codes, specifications, and processes to maintain quality standards. To qualify for this position, you should hold a degree in quality, industrial, or mechanical engineering and have at least 2 years of experience in quality engineering, quality assurance, or a related field. Strong communication and interpersonal skills are essential for effective coordination with departmental managers to create process checklists and conduct quality inspections. This is a full-time position with benefits including health insurance. The work schedule is during the day shift, and the role requires in-person work. If you are passionate about ensuring quality standards and driving improvements in quality control systems, we encourage you to apply for this opportunity.,

JOB ROLES AND RESPONSIBILITIES: • Shall able to classify project management consultants scope in quality budget formation. • Verifies bill payments for all expenses (as per the current corporate limit) • Defines and modifies quality standards from customer perspective • Defines quality standards and shall be able to incorporate changes in project quality plan as per project requirements & standard Quality Manual. • Communicates quality standards to project teams • Prepares annual Quality Audit calendar for the region. • Shall able to interpret standard Quality Manual audit requirements and I.S.O.9001, 2008 requirements. • Communicates the date and scope of audit to the regional staff and CMC H.O. • Conducts site audits related to process compliance and final quality along with technical specialist. • Shall able to classify process and product noncompliance and shall able to relate snag list with product noncompliance. • Prepares audit/nonconformance report, communicates audit insights to site team through closure meeting Follows up on action plans with the project and design team • Shall able to determine root cause analysis, corrections, corrective action &preventive action. • Monitors and facilitates QFD implementation • Analyses data and inputs data to QFD matrix • Translates customer opinions and integrates them into the product design (technical features) in coordination with regional head, project manager, architect and structural consultant. • Identifies areas of improvement in process and product specs • Facilitates root cause analysis with project and design teams • Provides input in quality management control • Nominates internal stakeholders for Quality trainings through consultation with regions • Develops the content of the training module / materials. • Delivers trainings to regional teams on quality management, use of quality tools in problem solving etc. • Complies with company defined guidelines and processes • Adheres to project timelines

You have a great opportunity to join as a Site Incharge for MEP Projects in Gurugram with 7-10 years of experience in managing large-scale project sites. As a Site Incharge, your responsibilities will include project execution, site management for industrial/commercial infrastructure, quality control, material inspection, and ensuring compliance with project specifications and standards. You should have a strong knowledge of construction management, project scheduling, resource allocation, contractor/vendor coordination, and workforce management. Additionally, familiarity with HSE standards and statutory compliance is crucial for this role. Your ability to interpret engineering drawings, BOQs, and technical specs will be essential. Proficiency in MS Project, Primavera, or AutoCAD, along with strong leadership and team-handling skills, is required. Reporting and documentation skills such as preparing Daily Progress Reports, material reconciliation, etc., will be part of your routine tasks. Experience in budget adherence, cost control at the site level, and ensuring efficient project delivery will be crucial for success in this role. Preferred qualifications include a Bachelors degree in Civil, Mechanical, or Electrical Engineering, and a PMP or equivalent certification would be advantageous. If you are interested in this exciting opportunity, please contact Aaina at +91 85959 24903 or email at Hr@job24by7.com.,

ASSISTANT QUALITY CUM MATERIAL ENGINEER The Candidate should be Graduate in Civil Engineering or diploma in Civil Engineering with 3years of experience.