897 Manufacturing Engineering Jobs - Page 23

The following 3 teams will be led by the Strategic Sourcing & Transition Director and the specific areas of activities and their Scope : The Strategic Sourcing team will work closely with their global counterparts and are responsible for all aspects of the commercial, risk mitigation and sourcing strategy for the commodities under his/her leadership Including make vs buy decisions, supplier designations (grow, maintain, reduce, exit), source selection, cost reduction initiatives and LTA negotiations. The Strategic Sourcing team develops and executes a one company (RTX, P&W) commodity strategy in consultation with their supply chain counterparts in considering delivery, cost and quality objectives. This team also manage supplier relationships as required as a point of escalation from proposal and selection through negotiation and also manages supplier restructuring and transitions. The team must understand the relevant market landscape of the commodity as well as P&W s internal production needs. Identify new suppliers to support the business needs. The team uses the strategic sourcing review (SRR) process to develop P&WC, P&W and RTX one company strategies, uses the RTX Global Sourcing Playbook process to negotiate long-term agreements (LTAs) in collaboration with the contract s teams. The Transitions team will work closely with their global counterparts and are responsible for all aspects of work transfers. Execute supplier change projects (transition projects) for purchase or manufacture parts following our internal qualification process for new suppliers while respecting the allocated time and budget. Coordinate multidisciplinary reviews with internal/External stakeholders (Engineering, Quality, Procurement, Laboratory, Inspection, etc...) to resolve various technical issues impacting transitions and deliveries. Reviews include Business Cases, contract requirements verification (CRV), Line of balance (LOB), PAPP, manufacturing readiness levels (MRL), First Article Inspection Review (FAIR), Engineering First Piece Review (EFPR), Defense Contract Management Agency (DCMA) review, and all PW requirements for Qualified Supplier List (QSL) and Qualified Parts List (QPL). Forecast and monitor the associated project budgeting. Works with appropriate strategic sourcing and procurement representatives to develop project business cases and overlap plans in support of project scope in accordance with Transition Standard Work. Assigns, schedules, reviews, and monitors project work to ensure that progress is within expected guidelines and is completed on time and within budget. Develop and implement industrialization plans to mitigate risk and successful execution. Ensures International Trade Compliance (ITC) requirements and licensing for products being transitioned are satisfied and in alignment with all Import and Export requirements as understood through ITC. The Manufacturing Engineering team will work closely with their global counterparts and are responsible for all aspects of supplier and/or product development. Evaluate supplier manufacturing readiness and proactively support and resolve readiness issues. Drive supplier manufacturing readiness level (MRL) requirements and documentations. Support suppliers with manufacturing methods and processes necessary for machining, sheet metal, forming, forging and processing on engine parts. Support project managers in project kick-off meetings, project reviews on manufacturing process and challenges, facilitate PW design engineers with suppliers on special processes and supplier LOB. Provide manufacturing producibility input to designs and part family process standards Identifying and addressing long term recommendations that will lead to a reduction in throughput times and increase quality. Identify & implement supplier process improvements that increase output and reduce overall costs, including automation and robotics Review process yields and rates, and make suggestions for improvement Participate on manufacturing reviews, transitions, new product introduction reviews, and manufacturing standard work improvements Provide manufacturing process options, propose trade studies, evaluate manufacturing process maturity Evaluate tooling, special test and inspections concepts and equipment Participate in lean manufacturing initiatives that support continuous process improvement Provide urgent manufacturing support for critical supply issues and troubleshooting quality issues and assist suppliers with root cause and corrective actions Qualifications You Must Have Permitted to Live and Work In India Education & Experience: B.E / B. Tech (Mechanical/ Industrial management) or Similar / University Degree or equivalent experience and minimum 14 - 18 years prior relevant experience, or Masters / M. Tech in a related field and minimum 12 - 16 years experience Engineering/Other Technical Positions in Aerospace & Defense Industry or Similar Allied Industries In-depth understanding of best practices and latest technology in Manufacturing processes; Forgings and Machining in the marketplace Should have Managed Large Industrial Vendors / Suppliers interactions; awarding work and ensuring on time Deliver within Cost and Quality parameters Should have managed Large Multi Million Dollar supply chain sourcing programmes Ability to work in Cross functional teams such as SCM; Finance; Manufacturing; Engineering and After Market teams Proven track record of successfully managing sourcing projects and delivering cost savings. Strong negotiation, analytical, and problem-solving skills. Excellent project management skills, with the ability to manage multiple projects simultaneously. Strong interpersonal and communication skills, with the ability to work effectively with cross-functional teams and external suppliers. Skills: Supply Chain Transformation Business Strategy Strategic Sourcing Transition Management Change Management E- Sourcing Optional Qualifications Certifications : Certified Procurement Professional Certified Supply Chain Professional Project & Change Management Certification Qualifications We Prefer Ability to influence others to accept practices and approaches, and ability to communicate and influence senior executive leadership. Ability to provide guidance and leadership to implement changes, which may be transformational and have broad impact on the achievement of results for the organization. What We Offer Long-term deferred compensation programs Daycare for young children Advancement programs to enhance education skills Flexible work schedules Leadership and training programs and Growth Opportunities International Exposure Comprehensive benefits, savings, and pension plans Financial support for parental leave Reward programs for outstanding work

Team and Responsibilities The customer experience team at PhonePe takes full ownership of a customer’s journey on the app, identifies opportunities for it to be better based on customer VOC, reduces effort to get help and strives to provide quick and meaningful resolution. To better the customer experience by being an ambassador for our customers and fulfilling a core cultural tenet of ‘Customer First’ is how we execute on our vision to be best in class. The ‘Process Designer’ is a strategic role impacting customer experience. PhonePe caters to various segments of customers through the diverse product offerings. A process designer’s role is at the core laying the foundation for the exceptional experience each of those customers have while interacting with the support org. The role contributes to preempting and continually identifying the customer needs to design the most efficient and effective processes to drive top class experience. ROLE EXPECTATIONS: Process flows – Pursue extensive ticket analysis, gather customer insights and identify possible failure points for processes which lead to issues and subsequent tickets. Design effective automation (BOT/IVR) flows and other process flows for the assigned PODs with focus on Customer experience Influence from VOCs Influence from data analysis Compliance to set guidelines Impact Priority VOCs – Exceptional grip on VOCs for the PODs assigned Placeholders to perform VOC analysis Prepare internal prioritization roadmaps basis the VOC analysis Work with different stakeholders to identify solutions to the identified VOC influencers Tracking – Monitor the progress of metrics Placeholder for daily monitoring of POD metrics Identify challenges and solutions in partnership with AMs Communication Work with the team to build the narratives for accomplishments, POD progress etc. Play an active role in Weekly and Monthly business reviews Collaboration Regular connects with stakeholders to share updates, understand pain points, brainstorm etc Learning – Upskill self with the customer journey, priorities of other PODs to provide PD with BCP and reduce the dependency on single POCs Ideal Candidate: Should be curious, deploy first principles thinking and question norms/as-is processes to ideate/create and lead new projects focused on customer experience, automation with a measurable business impact. Should display structured problem-solving skills and use a systematic, disciplined and fact-based process to get RCAs and solve them. Should be able to synthesize quantitative & qualitative data to derive subject matter expertise and provide relevant insights to stakeholders - business teams, product and engineering leadership. Have good interpersonal and communication skills. Be able to multitask and prioritize basis impact. Educational qualification & experience: Education – Graduate in any stream Candidates with a domain experience of 2+ years experience in Process Excellence/Process Design/Process Improvement with active role played in VOC analysis, Data Analysis, Prioritization exercises. PhonePe Full Time Employee Benefits (Not applicable for Intern or Contract Roles) Insurance Benefits - Medical Insurance, Critical Illness Insurance, Accidental Insurance, Life Insurance Wellness Program - Employee Assistance Program, Onsite Medical Center, Emergency Support System Parental Support - Maternity Benefit, Paternity Benefit Program, Adoption Assistance Program, Day-care Support Program Mobility Benefits - Relocation benefits, Transfer Support Policy, Travel Policy Retirement Benefits - Employee PF Contribution, Flexible PF Contribution, Gratuity, NPS, Leave Encashment Other Benefits - Higher Education Assistance, Car Lease, Salary Advance Policy Working at PhonePe is a rewarding experience! Great people, a work environment that thrives on creativity, the opportunity to take on roles beyond a defined job description are just some of the reasons you should work with us. Read more about PhonePe on our blog. Life at PhonePe PhonePe in the news

Who We Are Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world like AI and IoT. If you want to work beyond the cutting-edge, continuously pushing the boundaries ofscience and engineering to make possiblethe next generations of technology, join us to Make Possible a Better Future. What We Offer Location: Bangalore,IND At Applied, we prioritize the well-being of you and your family and encourage you to bring your best self to work. Your happiness, health, and resiliency are at the core of our benefits and wellness programs. Our robust total rewards package makes it easier to take care of your whole self and your whole family. Were committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits . Youll also benefit from a supportive work culture that encourages you to learn, develop and grow your career as you take on challenges and drive innovative solutions for our customers.We empower our team to push the boundaries of what is possiblewhile learning every day in a supportive leading global company. Visit our Careers website to learn more about careers at Applied. Summary Demonstrates higher level knowledge and skills within own discipline. Solves varied and moderately complex problems. Exhibits knowledge of the company, processes, and customers. Job Responsibilities Ability to analyze Customer requirements followed by conceptualization of design proposal. Verify design proposal through design calculations, tolerance stack-up analysis and optimizing the design of a part/module. Part design, Assembly/Kits design and release of drawings for Manufacturing using CAD tools. Develop detailed design layouts (assembly drawings) of sub-assemblies and review the design w.r.t manufacturability, assembly, maintenance & servicing. Develop manufacturing drawings, BOM with respect to concept design/customer specifications and manufacturing requirements per ASME Y14.5M-1994 standards. Review and validate Mfg.drawings for manufacturability including correctness of GD&T, material selection, secondary processes followed by release to manufacturing. Experience in handling NSRs (Non-Standard Requests) / NSOs (Non-System Orders) and associated business processes. Obtain design approval by coordinating with relevant stakeholders and until final approval. Perform technical reviewing of drawings w.r.t AMAT standards and procedures to meet the design intent. Create Engineering Change Orders for Part/Assembly/Option releases, revising drawings, ECO reviews through review process. Analyze supplier issues and respond in timely manner with appropriate solutions. OEM selection and classification as per Customer requirement. Skills required Proficient in UG-NXand Auto Cad Inventor CAD tools Extensive knowledge on Product Structure/BOM Management Expertise on GD&T, Design Calculations and Manufacturing drawing development. Demonstrated ability to write and close Engineering changer orders. Knowledge on PLM software like, TCE (Team Center Engineering), Wind chill. Demonstrated computer skills to include MS Office, Lotus Notes, Visio and/or other Software / systems. Functional Knowledge Demonstrates depth and/or breadth of expertise in own specialized discipline or field Leadership Leads functional projects/tasks with moderate resource requirements, risk, and/or complexity Problem Solving Leads others to solve complex problems; uses sophisticated analytical thought to exercise judgment and identify innovative solutions Impact Impacts the achievement of customer, operational, project or service objectives; work is guided by functional policies Interpersonal Skills Communicates difficult concepts and negotiates with others to adopt a different point of view Education Bachelors degree in Mechanical engineering with minimum 5 to 8 years experience in product design and development domain. Additional Information Time Type: Full time Employee Type: Assignee / Regular Travel: Relocation Eligible: No Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

Date 28 May 2025 Location: Vadodara, GJ, IN Company Alstom At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling, and digital mobility, we offer our diverse customers the broadest portfolio in the industry. Every day, 80,000 colleagues lead the way to greener and smarter mobility worldwide, connecting cities as we reduce carbon and replace cars. Your future role Take on a new challenge and apply your supply chain expertise in a cutting-edge field. Youll work alongside a collaborative and innovative team of professionals. Youll play a critical role in establishing a robust and agile supply chain through process adherence, fostering routines, and managing people competencies. Day-to-day, youll work closely with internal teams (such as the SDPM team, Project Supply Chain Team, and Site Supply Chain functions like Procurement, Warehouse, and Logistics) and external partners (including material suppliers and logistics providers), driving supply chain performance and transformation while ensuring seamless operations. Youll specifically take care of defining short- and mid-term actions aligned with Indias supply chain strategy and consolidating metrics for management reporting, but also identifying and addressing gaps in existing supply chain processes. Well look to you for: Expressing delivery needs to suppliers and ensuring timely availability of goods for Alstom projects Monitoring supplier performance KPIs and driving improvements Managing purchase requisitions and material planning documents Ensuring the accuracy of material planning master data Analyzing supplier confirmations and mitigating risks to production/projects Resolving supply chain issues such as shortages, non-conformities, and receiving discrepancies Collaborating on supplier capacity assessments and business risk mitigation plans All about you We value passion and attitude over experience. Thats why we dont expect you to have every single skill. Instead, weve listed some that we think will help you succeed and grow in this role: Engineering degree in ECE, EEE, or Mechanical Engineering with experience in supply chain, logistics, or transportation Experience or understanding of procurement, material control, or parts control in the manufacturing industry (810 years preferred) Knowledge of Alstom tools such as SAP GSI, Kinaxis, ASCOT, Qlik Sense, and GSI BI Familiarity with production planning, procurement planning, and warehouse management processes Strong analytical, problem-solving, and decision-making skills Proficiency in ERP systems and MS Office tools (Word, Excel Macro, PowerPoint, Access) Excellent communication skills in English (Tamil is appreciated but not mandatory) Things youll enjoy Join us on a life-long transformative journey the rail industry is here to stay, so you can grow and develop new skills and experiences throughout your career. Youll also: Enjoy stability, challenges, and a long-term career free from boring daily routines Work with new security standards for rail signalling Collaborate with transverse teams and helpful colleagues Contribute to innovative projects Utilise our flexible and inclusive working environment Steer your career in whatever direction you choose across functions and countries Benefit from our investment in your development, through award-winning learning Progress towards senior leadership roles in supply chain management Benefit from a fair and dynamic reward package that recognises your performance and potential, plus comprehensive and competitive social coverage (life, medical, pension) You dont need to be a train enthusiast to thrive with us. We guarantee that when you step onto one of our trains with your friends or family, youll be proud. If youre up for the challenge, wed love to hear from you! Important to note As a global business, were an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. Were committed to creating an inclusive workplace for everyone.

Date 28 May 2025 Location: Bangalore, KA, IN Company Alstom At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling and digital mobility, we offer our diverse customers the broadest portfolio in the industry. Every day, 80,000 colleagues lead the way to greener and smarter mobility worldwide, connecting cities as we reduce carbon and replace cars. Could you be the full-time ALM Deployment Leader in Bangalore were looking for Your future role Take on a new challenge and apply your engineering and ALM expertise in a new cutting-edge field. Youll work alongside dedicated and innovative teammates. You'll drive the deployment of the ALM IBM to existing programs/projects, ensuring seamless integration and functionality. Day-to-day, youll work closely with teams across the business (Process Owners, Authors, Project Teams), support troubleshooting efforts, and much more. Youll specifically take care of organising reviews, supporting training for Key Users and End Users, and capturing Return of Experience to feedback to the Core ALM Team, but also ensure the coherence of all individual tools within the ALM solution. Well look to you for: Driving deployment schedules and process mapping for ALM Coordinating verification and validation activities Providing training and support to users Ensuring solutions meet project business needs Promoting ALM knowledge on site Communicating effectively with internal and external partners All about you We value passion and attitude over experience. Thats why we dont expect you to have every single skill. Instead, weve listed some that we think will help you succeed and grow in this role: Degree in engineering Experience or understanding of ALM, preferably with a minimum of 2 years experience Knowledge of configuration management, requirement management, verification, and validation processes Familiarity with the Jazz Platform A certification in a relevant field. Open mindset and quick learning abilities Fluency in English (written and spoken) Things youll enjoy Join us on a life-long transformative journey the rail industry is here to stay, so you can grow and develop new skills and experiences throughout your career. Youll also: Enjoy stability, challenges and a long-term career free from boring daily routines Work with new security standards for rail signalling Collaborate with transverse teams and helpful colleagues Contribute to innovative projects Utilise our agile working environment Steer your career in whatever direction you choose across functions and countries Benefit from our investment in your development, through award-winning learning Progress towards leadership roles Benefit from a fair and dynamic reward package that recognises your performance and potential, plus comprehensive and competitive social coverage (life, medical, pension) You dont need to be a train enthusiast to thrive with us. We guarantee that when you step onto one of our trains with your friends or family, youll be proud. If youre up for the challenge, wed love to hear from you! Important to note As a global business, were an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. Were committed to creating an inclusive workplace for everyone.

Date Location: Bangalore, KA, IN Company Alstom Req ID:484400 Leading societies to a low carbon future, Alstom develops and markets mobility solutions that provide the sustainable foundations for the future of transportation. Our product portfolio ranges from high-speed trains, metros, monorail, and trams to integrated systems, customised services, infrastructure, signalling and digital mobility solutions. Joining us means joining a caring, responsible, and innovative company where more than 70,000 people lead the way to greener and smarter mobility, worldwide Purpose of the job Lead all the Tooling Activities for the assigned Project Monitor & Ensure the Project Tooling KPIs are Met in all SQCD Manage Inhouse Sub Con and Suppliers in Tooling Activities for the respective Project Conduct FAT / SAT and address all the Improvements identified during Production and handover to Site Representative Tender Costing Submission for the Tooling NRC Efforts and costing Optimizing the Cost for the Tooling on Design and Manufacturing Develop Tooling Standards and implement across Projects. Responsibilities during the Project Development phase, on hisTooling domain, under the direction of the Tooling Manager & Project Industrialization Manager Prepare TPS for all the Tooling and share it to Suppliers and get the Technical /Commercial offers Validate the Technical Offer, Estimate the Cost of Tooling and share the Budget to Sourcing. Ensure Right Country Standards are met During the Design and Manufacturing Ensure Local EHS are met During the Design and Manufacturing Develop New Concepts while designing various Tools (Welding Fixtures, Assembly Fixtures, Lifting tackles) Able to Create Design in Catia V5 & DMA. Implement Automation (Hydraulic & Pneumatic) of Welding Fixtures & Assembly Fixtures Conduct Design Reviews & DAP with all the Stake Holders and get the Signoff for Inhouse and Supplier Designs, addressing all the past REX & Areas of Improvements. Detailing the design by making 2D Drawings in Catia V5 (Able to give critical dimensions. with its Mfg. tolerances, GD&T) Clarify the Tooling Suppliers for their doubts in the tooling drawings Follow up the Supplier for the Manufacturing Progress and Monitor the Progress Monitor the Quality of Tooling Manufactured wrt. to Welding / Machining and Painting Necessary Modifications & Improvements during the manufacturing, Validation to be updated in the Fixture Drawings Conduct Fixture Inspection, Validation & Trial, Address the Concerns raised During Trial with CAPA Coordinate with Engineering & Process for getting necessary input/Alignment During the TPS Preparation DR and DAP Required to travel & work at Sricity , Savli , Kolkata, Coimbatore & Madhepura. Required to travel to Tooling Supplier places across India Do Follow up with Tooling Suppliers as per schedule To take actions for Cost Optimizing for the Tooling on Design and Manufacturing To take actions for Developing Standards and Tooling Library Desired Knowledge / Experience Experienced in Tool Design in Railway industry or Heavy Industries Experience on Line Automation Good knowledge of technologies, IT Tools Catia V5 Good Knowledge of GD&T Fluent English. Skills & Competencies Availability Team work Pedagogy and Good oral and written communication. Mobility requirements Frequent travels mainly in India. Alstom is the leading company in the mobility sector, solving the most interesting challenges for tomorrows mobility. Thats why we value inquisitive and innovative people who are passionate about working together to reinvent mobility, making it smarter and more sustainable. Day after day, we are building an agile, inclusive and responsible culture, where a diverse group of people are offered opportunities to learn, grow and advance in their careers, with options across functions and geographic locations. Are you ready to join a truly international community of great people on a challenging journey with a tangible impact and purpose Equal opportunity statement: Alstom is an equal opportunity employer committed to creating an inclusive working environment where all our employees are encouraged to reach their full potential, and individual differences are valued and respected. All qualified applicants are considered for employment without regard to race, colour, religion, gender, sexual orientation, gender identity, age, national origin, disability status, or any other characteristic protected by local law. Job Type:Experienced

Date 11 Feb 2025 Location: Bangalore, KA, IN Company Alstom Leading societies to a low carbon future, Alstom develops and markets mobility solutions that provide the sustainable foundations for the future of transportation. Our product portfolio ranges from high-speed trains, metros, monorail, and trams to integrated systems, customised services, infrastructure, signalling and digital mobility solutions. Joining us means joining a caring, responsible, and innovative company where more than 70,000 people lead the way to greener and smarter mobility, worldwide Qualifications & Skills Process Manufacturing Engineering experience of 12+Years. Technical knowledge of Manufacturing Engineering, preparing manufacturing work instructions, line balancing and process routing. Experience in working on DELMIA 16x and above, for Bill of Materials, Routings, Work instructions Familiar with ENOVIA & CATIA V5/V6. Process FMEA, QRQC. Key Responsibilities: Interface with key stakeholders from CDS / TDS sites. Understand the Sites WoW (Way Of Working), Methodologies and Processes. Review all Technical Specifications & STDs document. Create / manage PLM templates and 3PL / Part library within PLM. Creation of Manufacturing BOM on 3D Experience tool ( In Delmia environment). Map product manufacturing process on 3D Experience tool ( In Delmia environment). Creating routing and work instructions on 3D Experience tool ( In Delmia environment). Knowledge on Time analysis (MTM, MEK, UAS) and Technical drawings. Restructure / Re-create Mfg. drawings with all required details and update title blocks as required. Ensure the final output ( 3D CAD, 2D Dwgs, Engineering Data and Documents) are as per specifications. Be responsible for Product Structure in 3DX Generate / Validate 2D and 3D in compliance with QCD commitments, Mtier rules and processes. Verify consistency of digital mock-up vs. legacy. Engineering Documents and Deliverables attached in the Product Structure. Product Baseline and configuration. Deliver weekly progress report to CDS / TDS and secure E-BOM validation at the end of reconstruction. Alstom is the leading company in the mobility sector, solving the most interesting challenges for tomorrows mobility. Thats why we value inquisitive and innovative people who are passionate about working together to reinvent mobility, making it smarter and more sustainable. Day after day, we are building an agile, inclusive and responsible culture, where a diverse group of people are offered opportunities to learn, grow and advance in their careers, with options across functions and geographic locations. Are you ready to join a truly international community of great people on a challenging journey with a tangible impact and purpose Equal opportunity statement: Alstom is an equal opportunity employer committed to creating an inclusive working environment where all our employees are encouraged to reach their full potential, and individual differences are valued and respected. All qualified applicants are considered for employment without regard to race, colour, religion, gender, sexual orientation, gender identity, age, national origin, disability status, or any other characteristic protected by local law.

Date 23 May 2025 Location: Savli, IN Company Alstom At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling and digital mobility, we offer our diverse customers the broadest portfolio in the industry. Every day, 80,000 colleagues lead the way to greener and smarter mobility worldwide, connecting cities as we reduce carbon and replace cars. Could you be the full-time Industrial Costing Specialist in our dynamic Project Management Excellence (PME) team, based in [LOCATION] were looking for Your future role Take on a new challenge and apply your comprehensive expertise in a new cutting-edge field. Youll work alongside dedicated and collaborative teammates. You'll contribute to the financial and operational excellence of our projects. Day-to-day, youll work closely with teams across the business (Engineering, Manufacturing, Supply Chain, Industrial Quality), provide detailed cost analysis and much more. Youll specifically take care of developing new product and process cost solutions, but also support decision-making with precise costing during critical phases of our projects. Well look to you for: Performing accurate and timely industrial costings Developing cost solutions for new products and processes Supporting bid and project teams with financial data Defining and maintaining workload plans for the PME department Updating industrial costs in the Reference Library (Ref Lib) Conducting specific analyses such as Time Spent vs Method Time All about you We value passion and attitude over experience. Thats why we dont expect you to have every single skill. Instead, weve listed some that we think will help you succeed and grow in this role: Degree in Mechanical/Production/Automobile Engineering Experience or understanding of Process & Manufacturing Engineering Knowledge of Lean Manufacturing and Time Management Familiarity with ERP systems such as SAP A certification in project management or related field is advantageous Proficiency in CAD and PLM tools (e.g., CATIA, DELMIA) Excellent communication and organizational skills Things youll enjoy Join us on a life-long transformative journey the rail industry is here to stay, so you can grow and develop new skills and experiences throughout your career. Youll also: Enjoy stability, challenges and a long-term career free from boring daily routines Work with new security standards for rail signalling Collaborate with transverse teams and helpful colleagues Contribute to innovative projects Utilise our flexible working environment Steer your career in whatever direction you choose across functions and countries Benefit from our investment in your development, through award-winning learning Progress towards leadership and advanced technical roles Benefit from a fair and dynamic reward package that recognises your performance and potential, plus comprehensive and competitive social coverage (life, medical, pension) You dont need to be a train enthusiast to thrive with us. We guarantee that when you step onto one of our trains with your friends or family, youll be proud. If youre up for the challenge, wed love to hear from you! Important to note As a global business, were an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. Were committed to creating an inclusive workplace for everyone.

Date 12 Jun 2025 Location: Vadodara, GJ, IN Company Alstom At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling and digital mobility, we offer our diverse customers the broadest portfolio in the industry. Every day, 80,000 colleagues lead the way to greener and smarter mobility worldwide, connecting cities as we reduce carbon and replace cars. Your future role Take on a new challenge and apply your methodical and process-driven expertise in a new cutting-edge field. Youll work alongside innovative, supportive, and detail-oriented teammates. You'll contribute to shaping the future of sustainable transport by improving product manufacturability and achieving Quality, Cost, and Delivery (QCD) targets. Day-to-day, youll work closely with teams across the business (Process Engineers, Product Introduction Managers), participate in product design reviews, and much more. Youll specifically take care of estimating Method Time, participating in P-FMEA, and validating prototypes, but also request and specify tooling as needed. Well look to you for: Guiding product definition during specification and preliminary design phases to enhance manufacturability Participating in product design reviews and estimating Method Time Engaging in P-FMEA and prototype validation during the detailed design phase Requesting tooling and writing specifications, ensuring good EHS and ergonomic conditions Performing ERP routings, Work Instructions, and Inspection Instructions, programming for CNC machines Validating product design and industrialization through FAR and FAI Industrializing retrofit after engineering changes post-Serial Go All about you We value passion and attitude over experience. Thats why we dont expect you to have every single skill. Instead, weve listed some that we think will help you succeed and grow in this role: Degree in Mechanical, Industrial Engineering or a related field Experience or understanding of manufacturing processes and product lifecycle Knowledge of QCD principles Familiarity with P-FMEA and FAR/FAI processes A certification in Lean Manufacturing or Six Sigma is advantageous Proficiency in ERP systems and CNC programming Excellent communication and teamwork skills Things youll enjoy Join us on a life-long transformative journey the rail industry is here to stay, so you can grow and develop new skills and experiences throughout your career. Youll also: Enjoy stability, challenges and a long-term career free from boring daily routines Work with new security standards for rail signalling Collaborate with transverse teams and helpful colleagues Contribute to innovative projects Utilise our flexible working environment Steer your career in whatever direction you choose across functions and countries Benefit from our investment in your development, through award-winning learning Progress towards senior engineering roles Benefit from a fair and dynamic reward package that recognises your performance and potential, plus comprehensive and competitive social coverage (life, medical, pension) Important to note As a global business, were an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. Were committed to creating an inclusive workplace for everyone.

Date 3 Jun 2025 Location: Kolkata, WB, IN Company Alstom Req ID:[[52181]] We create smart innovations to meet the mobility challenges of now and the future. We design and manufacture a complete range of transportation systems, from high-speed trains to electric buses, autonomous subways, signalling and digital mobility solutions. Joining us means joining a truly global community of 36300 people dedicated to solving real-world mobility challenges and achieving international projects with sustainable local impact. JOB TITLE & JOB CODE PIQ - P rocess I ndustrial Q uality Manager (QC-IQ-02_003) I ndustrial Q uality Engineer (QC-IQ-02_004 for Tier1 & QC-IQ-02_005 for Tier2) PIQ - P rocess I ndustrial Q uality Leader (QC-IQ-02_006) I ndustrial Q uality T echnician (QC-IQ-02_010) PURPOSE OF THE JOB Ensure Product Quality compliance according to Customer & Internal specifications Deploy Industrial Quality Standards per manufacturing process during manufacturing to support External Demerit at ZERO for Customer and improve IQ Performance with DpU (Defect per Unit), especially for Special Processes ORGANISATION Organization structure (job belongs to...) RSC / D&IS / SERVICE Industrial Quality Reports directly to Industrial Quality Manager for PIQ Manager / Leader Direct reports to PIQ Manager / Leaders Industrial Quality Engineer / Technician Industrial Quality Inspector (Coud be dotted line in case of reallocation of QC-IQ-04 to Production) Network & Links Internal Line Manager, EPU manager (Elementary Production Unit), PME team (Process & Manufacturing Engineering), SC (Supply Chain), SQA (Supplier Quality Assurance) & PrXM (Project X Manager) External Customers representative Suppliers & Sub-contractors MAIN RESPONSABILITIES Accountability & Authorities PIQ - P rocess I ndustrial Q uality Manager ( Engineer ) / Leader ( Technician ) Manage IQ activities in relevant workshop People, Process & Performance Perform DpU / External Demerit analysis to lead efficient Line Quality Animation with industrial cross function team Support the decision for all Hand Overs (GO / NOGO) & keeps NO GO Veto Right in any case Stop the production if needed for mandatory reason (e.g. Safety impact needed rework) Participate to Criticality Matrix analysis & contribute to Process FMEA (Failure Mode & Effect & Analysis) Lead FAR & Participate to FMR / SMR Implement & Regularly update of Quality Control Plans during Pre & Serial manufacturing activities Ensure availability of Car History Book & Compliance of the manufactured products before shipping I ndustrial Q uality Engineering / Technician Support PIQ in her / his scope Manage Internal NCRSupport NCR team to complete characterization until closure using Problem Solving methodology (e.g. QRQC) Participate in Customer Inspections Qualify manufacturing teams regarding the Self-Inspection Manage Workstation Dynamic Checklists (Self-Inspection & Workstation Inspection) Perform Workstation Audit & Follow-up Perform or participate to inspections of products when required (e.g. PCx) Performance measurements External Demerit, Defects per Unit & First Pass Yield reductions to achieve objectives defined CONQ per unit (Cost Of Non Quality) reduction to achieve objective defined APSYS score objective for Industrial Quality requirements (Q09 to Q13 items) MAIN REQUIRED COMPETENCES Educational Mandatory Masters degree in engineering (electromechanical, electrical, material, mechanical) or equivalent for Engineer Associate degree for Technician (ex. equivalent of BTS in France 2 years technical degree after high school) Must be able to read drawings / specifications and familiar with a variety of test equipment Special Process Qualification minimum at Level 2 according to Quality Academy criterias Experience in managing Quality tools (Problem solving, Lean Six Sigma, ) Desirable Railway experience is a plus Experience Mandatory Processes knowledge on Quality and at Industrial level Management experience (For PIQ Manager / Leader) Using digital tools Desirable 5 years experiences in Industrial Experience in Project management or equivalent Experience in audit are appreciated Competencies & Skills Rigor & communication Technical mastering of railway products International mindset & Fluent in English (For PIQ Manager / Leader) Ability to work in a matrix organization and resistance to pressure (Production & Delivery) Knowledge of Quality standard (ISO9001, IRIS, CMMI, ) and Quality tools We believe that a diverse and inclusive workforce is a lever to running a sustainable and successful business. We are dedicated to creating an inclusive environment where all our employees are encouraged to reach their full potential, and individual differences are valued and respected.

Date 23 May 2025 Location: Savli, IN Company Alstom Req ID:483859 Position in the Organization Organization Structure See standard PME organization chart. Organizational Reporting Reports hierarchically to the Manufacturing Engineering Manager or to the domain PME leader. Reports functionally to the PIM (Product Industrialization Manager) Team (*depends on scope) People (*) 0 direct report Network and links Product Design Engineer, Manufacturing, Supply chain, Industrial Quality. Other domains Process Engineers, Manufacturing engineers / technicians, Special Process experts, Industrial Costing Manager. Tooling Engineer. APSYS Leader Mission & Responsibilities Responsibilities During specification and preliminary design phases: Bring ideas to the Process Engineer or the PIM to guide product definition in order to improve the product manufacturability and achieve QCD targets. Participate to the product design reviews when required. Estimate Method Time. During detailed design phase and before Serial Go: Participate to P-FMEA. Participate to validation of prototypes if any. Request tooling when needed and write tooling specifications. Depending on the domainperform ERP routings, Work Instructions, Inspection Instructions, program for CNC machines. And this ensuring good EHS and ergonomic conditions. Perform work stations task sequencing. Validate product design and industrialization through FAR and FAI. Calculate precise Method Time. After serial Go: Industrialize retrofit after engineering changesRoutings, Work Instructions, and tooling. Support Production to achieve manufacturing QCD targets. Participate to continuous improvement workshops. (ExSWIP) Contribute to industrial REX on manufacturing processes. Key Performance Indicator KPI n1 On time delivery of industrial documentation to manufacturing. KPI n2 On time FAI and Serial Go for his field of activities. KPI n3 Method Time in line with target. KPI n4 Reactivity in the treatment of technical issues met in production. Candidate requirements Educational Technical education BE/ B Tech (Mechanical/ Production/ Automobile) English read, written, spoken Min experience of 10 to 14 years. Desired Knowledge / Experience Manufacturing experience, preferably in the railway industry. Technical knowledge of Manufacturing Engineering, writing manufacturing work instructions, line balancing. Experience in working with an ERP (such as SAP) for Bill of Materials, Routings, Configuration follow-up Working knowledge in Quality, EHS standards and Ergonomics. Familiar with IS common tools. Process FMEA, QRQC. Time analysis (MTM, MEK, UAS). Behavioral Competencies Conscientious. Commits and delivers. Team Player. Spirit of Team Trust Action Decisive. Obtains and uses necessary information to make decisions. Refers decision to others when appropriate Self-Motivation. Logical and organized Good communication. You dont need to be a train enthusiast to thrive with us. We guarantee that when you step onto one of our trains with your friends or family, youll be proud. If youre up for the challenge, wed love to hear from you! Important to note As a global business, were an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. Were committed to creating an inclusive workplace for everyone.

Date 12 Jun 2025 Location: Vadodara, GJ, IN Company Alstom Job Title - Process & Manufacturing Engineering Engineer Min Experiance - 7-9 years Education - B.Tech/BE - Electical, Mechanical, Electronics. Autocad profociency will be added advantage. Candidate must be from production or manufacturing engineer background. If cabdidate has experiance of Robot & PLC programing will be prefered. During specification and preliminary design phases: -Bring ideas to the Process Engineer or the PIM to guide product definition in order to improve the product manufacturability and achieve QCD targets. -Participate to the product design reviews when required. -Estimate Method Time. - -During detailed design phase and before Serial Go: -Participate to P-FMEA. -Participate to validation of prototypes if any. -Request tooling when needed and write tooling specifications. -Depending on the domainperform ERP routings, Work Instructions, Inspection Instructions, program for CNC machines. And this ensuring good EHS and ergonomic conditions. -Perform work stations task sequencing. -Validate product design and industrialization through FAR and FAI. -Calculate precise Method Time. - -After serial Go: -Industrialize retrofit after engineering changesRoutings, Work Instructions, and tooling. -Support Production to achieve manufacturing QCD targets. -Participate to continuous improvement workshops. (ExSWIP) -Contribute to industrial REX on manufacturing processes.-During specification and preliminary design phases: -Bring ideas to the Process Engineer or the PIM to guide product definition in order to improve the product manufacturability and achieve QCD targets. -Participate to the product design reviews when required. -Estimate Method Time. Job Title - Process & Manufacturing Engineering Engineer Min Experiance - 7-9 years Education - B.Tech/BE - Electical, Mechanical, Electronics. Autocad profociency will be added advantage. Candidate must be from production or manufacturing engineer background. If cabdidate has experiance of Robot & PLC programing will be prefered.

Date 24 May 2025 Location: Sri City, AP, IN Company Alstom Req ID:482839 At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling and digital mobility, we offer our diverse customers the broadest portfolio in the industry. Every day, 80,000 colleagues lead the way to greener and smarter mobility worldwide, connecting cities as we reduce carbon and replace cars. Could you be the full-time Methods Engineer Fitting in Sricity were looking for Your future role Take on a new challenge and apply your technical expertise in a new cutting-edge field. Youll work alongside collaborative and innovative teammates. You'll play a pivotal role in defining and validating the detailed manufacturing process for new products. Day-to-day, youll work closely with teams across the business (such as Process Engineers, Production teams, and Quality departments), contribute to continuous improvement initiatives, and ensure high standards in manufacturing methods and documentation. Youll specifically take care of creating ERP routings, work instructions, and tooling specifications, but also support production teams to achieve manufacturing quality, cost, and delivery (QCD) targets. Well look to you for: Guiding product definition to improve manufacturability and achieve QCD targets. Participating in product design reviews and validation of prototypes. Creating and validating industrial documentation, including work instructions and inspection instructions. Performing work station task sequencing and ensuring ergonomic conditions. Supporting production teams in achieving QCD targets and addressing engineering changes. Driving continuous improvement actions and contributing to industrial feedback on manufacturing processes. All about you We value passion and attitude over experience. Thats why we dont expect you to have every single skill. Instead, weve listed some that we think will help you succeed and grow in this role: Technical education. Experience in manufacturing, preferably in the railway industry. Technical knowledge of manufacturing engineering, including writing work instructions and line balancing. Experience working with ERP systems (such as SAP) for Bill of Materials, Routings, and Configuration follow-up. Working knowledge of Quality, EHS standards, and Ergonomics. Familiarity with IS common tools. Understanding of Process FMEA, QRQC, and time analysis methods (e.g., MTM, MEK, UAS). Strong communication skills and a team-oriented mindset. Things youll enjoy Join us on a life-long transformative journey the rail industry is here to stay, so you can grow and develop new skills and experiences throughout your career. Youll also: Enjoy stability, challenges, and a long-term career free from boring daily routines Work with new security standards for rail signalling Collaborate with transverse teams and helpful colleagues Contribute to innovative projects Utilise our flexible and inclusive working environment Steer your career in whatever direction you choose across functions and countries Benefit from our investment in your development, through award-winning learning Progress towards senior engineering or leadership roles Benefit from a fair and dynamic reward package that recognises your performance and potential, plus comprehensive and competitive social coverage (life, medical, pension) You dont need to be a train enthusiast to thrive with us. We guarantee that when you step onto one of our trains with your friends or family, youll be proud. If youre up for the challenge, wed love to hear from you! Important to note As a global business, were an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. Were committed to creating an inclusive workplace for everyone.

Date 3 Jun 2025 Location: Sri City, AP, IN Company Alstom Req ID:485066 Job title Elementary Production Unit (EPU) Manager Purpose of the job Manage autonomous teams of operators in order to ensure production (Safety, respect of commitments in terms of Quality, Cost, Delivery, People). Position within the organisation Organisation structure The Production Unit Manager, 1st hierarchical level, supervises production autonomous teams (total headcount 15 to 25 people). Hierarchical links within the organisation Reports to the Line/Workshop manager (directly to the Production manager depending on the size of the site) Networks and links With support functions (Methods, Maintenance, Quality, Human Resources, Supply Chain, Engineering). With Union Representatives. Mission Objectives Ensure safety, respect of work equipment and environment enforce company safety rules, improve EHS, Manage production teams (monitor daily activities), Deliver production in line with quality, cost and delivery targets, Define and drive the implementation of improvement plans on operational (Q, C, D) and managerial (absenteeism, safety) results, Further implement the production system (APSYS), Develop autonomous production teams (develop team efficiency, multi-skills), Represent Site management towards employees. Competency:Competencies Degree Engineering degree or comparable professional experience. . Experience 8 - 12 Years experience in Assembly in Automotive, Railways , Commercial Vehicle Manufactiring ( Fabrication ) Knowledge of production system (lean manufacturing), and basics in Supply Chain Personality Leadership, autonomy, proactiveness, resistance to stress, organisation, management skills, interpersonal skills Responsibility Environment, Health and Safety Enforce safety rules and maintain production means in good working order. Take all appropriate measures in case of risk, Ensure safety training is provided to newcomers, Improve Safety in the scope communicate, perform GPI, evaluate risks, react to each incident by implementing improvement actionsetc), Analyse accidents, make sure that related action plans are implemented. Quality Ensure production according to quality required by the customer Ensure that procedures are respected and self inspection performed, Ensure rework, rserves and non-conformances (internal and external) are treated, Organise problem solving participate, escalate information if necessary, call for assistance from support functions, track eradication, Organise the update of specific technical work permits (gluing, vacuuming, welding,brazing) and self inspection habilitations. Delivery Drive autonomous teams work in order to comply with production planning (anticipate problems), Define and implement corrective actions when late versus planning. Cost In line with concerned work packages, stick to and manage the monthly cost base Optimise the allocation of available resources, track individual time sheets, Manage budget through indicators (direct manpower, overheads) Participate with Manufacturing Engineering to the continuous improvement of processes. Management Manage autonomous teams around QCDP objectives by using visual management, participates to daily meetings of the autonomous teams, communicate objectives and information needed for their achievement, bring teams problems up and organise their solving (request assistance from support functions when necessary), Drive the continuous improvement of results communicate objectives, involve teams, implement actions, pull and implement improvement ideas, initiate improvement workshops (SWIP) and problem solving groups (PDCA methodology), track improvement (visual management), communicate results. Develop individual performance track individual performance (evaluate, discuss with each team member at least during the annual performance review), propose salary reviews, Develop individual and collective competencesdefine and implement multi-skills. Develop team autonomy make operators able to manage their daily performance on their own and to deal with 1st level problems. Implement the adequate training plan. Site management representative and first contact with Union Representatives Location Sricity, Andhra Pradesh Shift First shift, Second shift and General Shift You dont need to be a train enthusiast to thrive with us. We guarantee that when you step onto one of our trains with your friends or family, youll be proud. If youre up for the challenge, wed love to hear from you! Important to note As a global business, were an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. Were committed to creating an inclusive workplace for everyone.

Date 21 May 2025 Location: Coimbatore, TN, IN Company Alstom Req ID:484414 Could you be the full-time Manufacturing Engineering Lead in Coimbatore, TN were looking for All about you We value passion and attitude over experience. Thats why we dont expect you to have every single skill. Instead, weve listed some that we think will help you succeed and grow in this role: Degree in Mechanical, Electrical, or Industrial Engineering Minimum 10 years of industrial experience in Line Layout, Jigs & Fixtures development, workstation design and line efficiency improvement in the auto or railway industry A Lean Six Sigma Green Belt certification (preferred) Experience in Lean Manufacturing and Six Sigma tools Analytical and decision-making skills Strong process orientation and strategic planning capabilities Ability to influence, lead change, and work collaboratively as a team player Proficiency in English and familiarity with IT tools such as Microsoft Excel and PowerPoint Your future role Take on a new challenge and apply your manufacturing and process improvement expertise in a cutting-edge field. Youll work alongside collaborative, innovative, and results-driven teammates. You'll play a pivotal role in designing and proposing the best manufacturing processes from upstream to downstream, ensuring a smooth flow of activities to help manufacturing meet daily objectives. Day-to-day, youll work closely with teams across the business (Manufacturing, Industrialisation, Quality, Sourcing, and Supply Chain), manage capacity and equipment requirements, and drive continuous improvement initiatives, among other responsibilities. Youll specifically take care of deploying industrial strategies to mitigate bottlenecks and piloting industrialization in close collaboration with the Technology Transfer team, but also support line balancing, workforce efficiency, and lean deployment. ReportingME Lead > ME Manager > Site PME Head Well look to you for: Managing bottlenecks and critical equipment capacity Driving PFMEA (Process Failure Mode and Effects Analysis) Overseeing capacity management for Cable Cutting, Looms, and Cabinets aligned with S&OP Defining CAPEX/OPEX requirements, supplier discussions, delivery, and handover Leading industrial strategies to meet QCD (Quality, Cost, Delivery) commitments Supporting technology transfer with line design, jigs and fixture requirements, capacity planning, and ergonomics Identifying risks, maximizing savings, and ensuring process improvements Deploying APSYS (Alstom Production System) to achieve level 3 maturity Ensuring the quality of technical know-how transfer, including training and validation of manufacturing processes Things youll enjoy Join us on a life-long transformative journey the rail industry is here to stay, so you can grow and develop new skills and experiences throughout your career. Youll also: Enjoy stability, challenges, and a long-term career free from boring daily routines Work with new security standards for rail signalling Collaborate with transverse teams and helpful colleagues Contribute to innovative projects Utilise our inclusive and flexible working environment Steer your career in whatever direction you choose across functions and countries Benefit from our investment in your development, through award-winning learning Progress towards leadership or specialized roles in manufacturing engineering Benefit from a fair and dynamic reward package that recognises your performance and potential, plus comprehensive and competitive social coverage (life, medical, pension) You dont need to be a train enthusiast to thrive with us. We guarantee that when you step onto one of our trains with your friends or family, youll be proud. If youre up for the challenge, wed love to hear from you! Important to note As a global business, were an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. Were committed to creating an inclusive workplace for everyone. Job Type:Experienced

Use Your Power for Purpose At Pfizer, technology drives everything we do. You will play a pivotal role in implementing impactful and innovative technology solutions across all functions, from research to manufacturing. Whether you are digitizing drug discovery and development, identifying innovative solutions, or streamlining our processes, you will be making a significant impact on countless lives. The Digital Manufacturing Team is responsible for the delivery of Pfizer s Core Digital Manufacturing Operations Management (MoM) capabilities at every level of the Pfizer Global Supply (PGS) Plant Network (ISA 95 Levels 0-4). These solutions are critical to Manufacturing & Lab Execution, Manufacturing Process Intelligence and Production Optimization that aim to improve product quality, increase asset utilization/uptime, automate manual workflows, and streamline plant floor operations. The Digital Manufacturing vision is to Simplify processes and experiences to drive PGS outcomes . The Digital Manufacturing Team supports all of Pfizer s Core Manufacturing & Engineering Solutions, while enabling a secure, seamless flow of contextualized data from the device & control levels, all the way to the top of the Enterprise. Our goal is to create persona driven, connected experiences across our shop floors to predict and optimize operations, while providing real-time insights to operators. Come join us to create Pfizer s Factory of the Future! Manufacturing Integration Cluster Product Owner - Manufacturing Operations Solutions colleague will spearhead deployment of solutions that drive operational discipline with a focus on increasing process robustness, yield improvements & product quality, while increasing asset utilization and manufacturing attainment. An ideal candidate will have a technical background with strong business process understanding across Manufacturing. The candidate will be responsible for managing the deployment strategy for PGS Manufacturing sites. This includes the solution plan of record, financial management, business governance facilitation, user forum management, business process harmonization, and audit readiness that support the PGS manufacturing sites and quality operations. This includes managing the relationship with the business to evaluate future functional enhancements and perform gap analysis as needed to meet evolving customer requirements. Guidance and enhancement governance is also required for legacy solutions that support the business client. What You Will Achieve Develop and lead/co-lead complex projects to achieve objectives. Provide technical guidance and support in IT/OT Convergence for Manufacturing Operations Solutions (MOS). Manage a cluster of active integration deployment sites. Define standards and processes in MOS equipment and systems integration. Liaise with site engineering leads to define and manage long term MOS integration & IT/OT Convergence roadmaps. Analysis and solving of technical issues related to the MOS integration and IT/OT Convergence. Manage activities of user/ Functional Requirements Specification generation, software configuration/coding and general oversight to the MOS software documentation practices. Lead data integration and IT/OT convergence requirements gathering from automation systems to core MOS. Lead new project scoping, costing and business case definition. Coordinate with Solutions Delivery Engineers to identify opportunities for technology alignment and efficiency of implementation, executing process improvements. Act as the primary technical interface between the business application platforms team and the assigned Digital Technology business line. Develop user stories and epics to encapsulate business requirements for prioritization against the master BAP backlog. Communicate project status, milestones, and issues to project sponsors, drive Master Data Management best practices, create technical designs and implementation plans, and perform technical evaluations of commercial blockchain-based solutions. Here Is What You Need (Minimum Requirements) BS in Engineering or Technology based with 7+ years of experience. Proven expertise in collaborating with sponsors and business leadership teams to develop and deliver technology roadmaps, strategies, and operating plans value analysis, business case development, and solution deployment through to value realization and system retirement is a significant advantage. Ability to work across multiple concurrent activities and successfully adapt to changing priorities as required. An understanding of system cGMP requirements and demonstrable knowledge of computer system design and maintenance lifecycle in cGMP environments. Experienceworking with Rockwell Pharmasuite or Siemens OpCenter Execution Pharma. Demonstrated understanding of key Agile techniques and a deep comprehension of systems and information architecture Broad knowledge of corporate enterprise systems Innovative mindset with strong delivery-oriented values Excellent stakeholder relationship management skills Exceptional interpersonal and communication abilities Bonus Points If You Have (Preferred Requirements) A Masters degree with relevant pharmaceutical industry experience Experience working with AVEVA PI Historian. Experience working with a Unified Name Space (UNS) Hands on experience in a manufacturing facility. Experience working on global programs A good understanding of business customers expectations and preferences, and how digital fits in Ability to anticipate and troubleshoot roadblocks, influencing teams to meet division targets Strong analytical and problem-solving skills Ability to manage multiple priorities in a fast-paced environment Strong leadership and team management skills Ability to travel up to 25% and must be able to support weekend or night cutover and/or upgrade activities Work Location Assignment: On Premise Additional Information In order to be considered for this position in Ireland you need to be legally eligible to work in Ireland. Please note there is no relocation support available for this position How to apply Make a difference today, all suitable candidates should apply with CV below. We are looking forward to hearing from you! Purpose Breakthroughs that change patients lives . . . At Pfizer we are a patient centric company, guided by our four values: courage, joy, equity and excellence. Our breakthrough culture lends itself to our dedication to transforming millions of lives. Digital Transformation Strategy One bold way we are achieving our purpose is through our company wide digital transformation strategy. We are leading the way in adopting new data, modelling and automated solutions to further digitize and accelerate drug discovery and development with the aim of enhancing health outcomes and the patient experience. Equal Employment Opportunity We believe that a diverse and inclusive workforce is crucial to building a successful business. As an employer, Pfizer is committed to celebrating this, in all its forms - allowing for us to be as diverse as the patients and communities we serve. Together, we continue to build a culture that encourages, supports and empowers our employees. Disability Inclusion Our mission is unleashing the power of all our people and we are proud to be a disability inclusive employer, ensuring equal employment opportunities for all candidates. We encourage you to put your best self forward with the knowledge and trust that we will make any reasonable adjustments to support your application and future career. Your journey with Pfizer starts here! Information & Business Tech #LI-PFE

Keywords: aerospace manufacturing engineering, Aircraft assembly plan, Installation Plan (IP), CATIA v5, PDM, IVT, electrical wire harness, IP, OSIP, CAPP, CDS, MES, Aircraft systems, ETAS

Role & responsibilities: Completing all tasks assigned by the Engineer. Assisting other engineers with projects. Conducting research and developing new engineering projects and ideas. Conducting tests and experiments on engineering projects. Performing maintenance tasks on engineering equipment. Traveling to other sites when required. Offering suggestions for improvement.

Overview Analyzes, develops, designs, and maintains software for the organization's products and systems. Performs system integration of software and hardware to maintain throughput and program consistency. Develops, validates, and tests: structures and user documentation. Work may be reviewed for accuracy and overall adequacy. Follows established processes and directions. Responsibilities Establishes requirements for less complex design projects Works on Completing all phases of Software engineering design projects Works on analysis of processes and delivers results to necessary stakeholders Analyzes results and recommends solutions Works on developing expected results on a variety of products Develops documentation for new projects and reviews previous results Works with latest technologies and new approaches Reviews changes or upgrades to existing designs or test Exercises judgment in selecting methods and techniques for obtaining solutions on assignments Qualifications Bachelor's Degree 0 to 2 years of experience Quantitative and problem solving skills

Immediate Hiring – Associate Engineer Location: Silvassa – Velugam Dairy Automation Pvt. Ltd. is hiring Associate Engineers (0–2 yrs). Diploma/B.E. in Mechanical/Electrical/Automation. Willing to travel. Freshers can apply.

Job Description Summary As a Lead Engineer - Probes, you will collaboratively execute programs in development and transfer of Ultrasound Probe devices You will interact with Global Engineering, Manufacturing Engineering and Supply Chain teams to identify and deliver novel solutions for complex, multi-disciplinary problems in Probe Install Base ensuring high standards of quality and reliability in the manufactured products

The Teamcenter Integration Lead with a Manufacturing background is responsible for designing, implementing, and optimizing Product Lifecycle Management (PLM) solutions using Siemens Teamcenter, AWC, Easy Plan and NX software within a manufacturing environment. This role involves collaborating with cross-functional teams to integrate PLM solutions with manufacturing systems, streamline processes, and enhance manufacturing efficiency. The Teamcenter Integration Lead provides technical leadership, configures data management solutions, and ensures compliance with quality standards and regulations. Overall, this role plays a crucial part in leveraging Teamcenter and NX software to drive operational excellence and innovation in manufacturing processes. Bachelor s degree in computer science, Manufacturing, Engineering, or related field. Proven experience, 3 years in PLM Solution and Design, with a focus on Teamcenter, AWC, Easy Plan, NX and other Siemens products. Hands on Experience with SOA and ITK Customizations is added advantage. Excellent communication and collaboration abilities. Experience with executing architecture design and troubleshooting critical issues with Siemens tools and frameworks. Ability to prioritize and manage multiple tasks in a fast-paced environment. Designing and implementing PLM solutions: Utilizing expertise in Teamcenter and NX software to design PLM solutions that align with the specific requirements of the manufacturing processes. Integrating with manufacturing systems: Collaborating with cross-functional teams to define the integration of Teamcenter and NX software with manufacturing systems such as ERP (Enterprise Resource Planning), MES (Manufacturing Execution System), and CAD/CAM (Computer-Aided Design/Computer-Aided Manufacturing) software. Streamlining Digital Thread Implementation: Implementing best practices and methods within Teamcenter to streamline Digital Thread Implementation of processes, improve collaboration among engineering teams, and enhance efficiency in manufacturing operations. Configuring manufacturing data management: Configuring data management solutions within Teamcenter to effectively manage and control manufacturing data, including Security, Supplier Collaboration, BOM (Bill of Materials), change management, and revision control. Enhancing manufacturing efficiency: Optimizing manufacturing processes by leveraging the capabilities of NX software for 3D modeling, simulation, and CAM programming to improve product design, manufacturing efficiency, and quality. Providing technical leadership: Serving as a technical leader in Teamcenter and NX software, offering guidance, support, and training to users, and project teams on best practices and utilization of the software in a manufacturing context. Ensuring compliance and quality standards: Ensuring that PLM solutions meet regulatory compliance requirements and quality standards relevant to the manufacturing industry, such as ISO certifications and industry-specific regulations.

Manufacturing Engineering for new products: (variant) During RFQ stage, study concept drawing and BOM given by R&D and review RFQ for Qty and milestone dates Prepare Make or Buy Sheet and prepare Preliminary manufacturing feasibility document for in-house processes. Prepare in-house manufacturing planning sheet for investment required along with Process costing input sheet and Capex approval sheet Prepare tentative timeline chart for in-house facility development Record all the documents in proper files (Soft/Hard) for reference after approvals During Proto Phase participate in DFM, DFA and proto sample making and provide inputs related to manufacturability Study Development product drawings as released by R&D and prepare process flow, critical product characteristics list and propose which mfg. cell to use and basic line design and get it reviewed by plant Head Attend Process Design Review meeting and get approval from BU-ME and Plant Head Conduct PFMEA review with CFT members & finalize pokayoke and interlocks required Review and modify master list of mass production line facilities and update master development plan, get it approved from plant ME head and release to PM Prepare specifications sheets for facilities like Machines, Jigs & fixtures Arrange Quotes for machines and Jigs & fixtures via purchase Compare quotes and give technical recommendation Raise PR and follow-up with purchase for releasing PO Interim and final inspection at supplier end to review development status Get machine installed and commissioned in plant through maintenance Conduct machine trials, prepare tooled up samples, conduct process qualification and process capability studies Conduct internal PPAP run with QA as lead Submit final Process flow, control plan & PFMEA with IPO Manufacturing engineering for current products: (variant) Prepare and keep cellwise and product wise line capacity sheets updated and get it reviewed by Plant Lead Current products for adequacy Keep latest shop floor layout ready with due approvals Execute debottlenecking projects as given by HOD Achieve Quality Improvements by doing defect analysis with QA and take actions on root cause by providing Preventive & Detective countermeasures. Fill PCRN, get it approved and implement Do process capability & Process qualification studies as and when required Productivity Improvement by Implement low cost automation solution, layout improvements to save manpower Update process document like PFC, PFMEA, Control Plan and IPO as and when required Continuous improvement through Industrial Engineering effort: Study production process at granular level and do time study using MOST methodology for new products as well as current products as and when requested Analyze opportunities and flow for improvement of workstation ergonomics and implement necessary actions Jigs, Fixtures, Tools & Gauges Design and documentation: (variant) Prepare concept design of Jigs, Fixtures & Process Gauges for New Product Development which is to be approved by Design Lead after design review with requester Design & release final tool drawing after approval from manager Ensure proper storage & retrieval of latest drawings Modify existing tools to achieve improvement in quality, reduction in set-up time &cost as per from process engineer by using pokayoke & SMED concepts Arrange new machine, Jigs & Fixtures as per given projects by HOD, follow model specifications for the same; RFQ to supplier, comparison of quotes and preparing technical recommendations etc., fill PR Do midterm inspection of new machine, Jigs & Fixture, get them installed by maintenance, do trials and handover to production Job Requirement Qualification- BE/B.Tech- Mechanical/Electrical/Electronics. Experience Required- 3-5 years of experience.

Production engineer/supervisor/quality control Contact: Sahil Gupta 8390906766

Process Knowledge of transmission parts. Knowledge of Gear & Shaft respective manufacturing operations. (Hobbing, Shaving, VMC, HMC, Turning,Broaching, Fine Boring, Journal Grinding etc.) Understanding of Gears, Shafts, Customer Drawing Requirement. Required Candidate profile CANDIDATES FROM GEAR / SHAFTS MANUFACTURING INDUSTRIES ONLY. To Design process and set process parameters to meet customer requirements. Exposure in the Machining line (CNC, VMC). NPD. AUTOCAD MUST.