636 Maintenance Engineering Jobs - Page 5

Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Display basic ability to repair or replace PVC copper pipe (including soldering). Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related duties. Assist with surface preparation and painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Use the Lockout/Tagout system before performing any maintenance work. Display working knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform mid-level troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineer I). Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Experience in general maintenance, exterior and interior surface preparation, and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. .

Achieves electrical maintenance , Develop maintenance procedures and ensure implementation Meets operational goals by contributing the preventive maintenance for maintaining production, productivity, quality, and customer-service standards, completing audits, identifying trends, recognizing problems and determining appropriate system improvements and solutions. Ensures stable electrical supply by maintaining equipment and machinery. 5 Supports engineering needs by responding to service requests for mechanical and electrical problems. Ensures compliance with all applicable codes and regulations and advises senior management on requirements. Maintains material and equipment supplies by regularly monitoring inventory levels, anticipating supply needs, placing and expediting electrical material orders and reviewing and approving invoices. Preserves equipment in good working order by following operating instructions, troubleshooting malfunctions, keeping supplies on hand, regularly performing preventive maintenance and promptly scheduling repairs. Keeps knowledge and skills current by participating in educational opportunities, reading professional publications, networking and participating in professional organizations.

We are hiring for Electrical Maintenance | Liwaspur | Sonipat | Manufacturing industry Exp.- 3-5yrs Salary- 25-35k SheetMetal or Automotive Industry Experience Preferred. Interested Candidate contact on- 8222822052

Job : *Automation & machine maintenance trouble shooting experience. *Strong knowledge in electrical wiring & electrical components used at industries. *Basic knowledge of pneumtic and hydraulic applications. *Robotic & Automation machine experience, machine building techniques. *Working knowledge of PLC, SCADA , HMI. *In addition Vision & Motion software and hardware troubleshooting. Work Experience EXPERIENCE :2 to 8 years QUALIFICATION B.E/Btech

Job The role is responsible for, \u2022 Attending calls from customer and providing on time support \u2022 Examine the spares parts and modification fixtures and ensuring the test chart \u2022 Providing support by either remote / onsite visit to customer place \u2022 Troubleshooting of Pneumatic, Hydraulic and other mechanical system \u2022 Prepare and share RCA report and Lesson learnt documents with respect Breakdown and Service support \u2022 Involvement for the supplier interaction, rework \u2022 Onsite mechanical installation and modification activities \u2022 New modification activity onsite understanding coordination with design team Work Experience Diploma in mechanical with 3+ years of experience Machine Assembly and Automation Field

Job \u2022 Follow-up with All Civil contractors to execute the work \u2022 Communicate with Government officials to Executethe CSR Activities. \u2022 Communicate with suppliers and get the material tocomplete the work on time. \u2022 Follow up with the Service provider to execute theAMC of Service and Utilities. Work Experience Diploma EEE - 3 TO 6 Years of Experience

Job : *Automation & machine maintenance trouble shooting experience. *Strong knowledge in electrical wiring & electrical components used at industries. *Basic knowledge of pneumtic and hydraulic applications. *Robotic & Automation machine experience, machine building techniques. *Working knowledge of PLC, SCADA , HMI. *In addition Vision & Motion software and hardware troubleshooting. Work Experience Work Experience EXPERIENCE :2 to 8 years QUALIFICATION ITI / DIPLOMA

Job Folow up with the AMC contractors to excute the work Communicate with the suppliers and get the material to complete on time Folow up with the service provider to excute the AMC of service and Utilities STP/ETP Operation monitoring PDM activities PLC modification New Project BOQ preparation & excution Maintenance of Utilities and CNC machines Work Experience Education Diploma in EEE / Mechanical / Mechatronics Years of experience 0-2Years

Job Folow up with the AMC contractors to excute the work Communicate with the suppliers and get the material to complete on time Folow up with the service provider to excute the AMC of service and Utilities STP/ETP Operation monitoring PDM activities PLC modification New Project BOQ preparation & excution Maintenance of Utilities and CNC machines Work Experience Education Diploma in EEE / Mechanical / Mechatronics Years of experience 0-2Years

Job \u2022 Study RFQ based on customer request. \u2022 Plan to prepare a new requirement document like Machine Power Calculation, IO list, BOM and Manuals \u2022 Knowledge in E-Plan checking and drafting. \u2022 Machine Assembly and Testing of panel & field wiring \u2022 Provide solutions for problems/ Troubleshooting during Assy/Testing \u2022 Knowledge in Pneumatics & Hydraulics Elements \u2022 Attending calls from customers to provide on time warranty & Post Warranty support and Ensure Zero production loss to the customers. \u2022 Need to ensure CSAT Score > 95% for all the customers. Work Experience Diploma -EEE / ECE with 2 - 3 years of experience in Assembly/Testing Machine Building and Automation Field \u2022 Good knowledge in Electrical & Mechanical elements

Having good knowledge of operation and maintenance of Purified water System, HVAC and utility equipment like Chiller , Air Compressor, hot water plant. Handle QMS documents like change control, Deviation, Qualification Protocols, SOPs etc Designation : Officer/Executive/Senior Executive Experience: 02 - 07 years

Job This role oversees the assembly of custom-designed machines tailored for specific tasks or industries. This role involves managing the entire assembly process, ensuring that the machines meet the unique requirements of each project as per the design and drawings. Understanding & analyzing 2D & 3D drawings Machine Assembly / testing /Commissioning Expert knowledge on Pneumatics & Hydraulics QC tools (Six sigma, Cp, Cpk) Troubleshooting & Commissioning Machine Assembly & Testing Provide solutions for problems during Assy/Testing Study RFQ/OA and Elect. Design/Programming Review BOM & Manuals Testing, Troubleshooting & Trials Commissioning Work Experience Should possess effective communication skills, and the ability to engage with people. Diligent with great attention to detail Good Leadership and team building Sound Knowledge in Automation Exposure to Robotics Hands on experience in machining operations Sound knowledge in Pneumatics & Hydraulics Good communication skills Willing to travel Education requirements : BE with 10- 16 years of Experience/ Diploma with 15-20 years of Exp (full time) StreamMechanical

Maintenance Mechanical Engineer | Liwaspur|SOnipat in Mfg Ind Exp.- 7-8 yrs Sal.- 35-45k or depend on interview Candidate knowledge of Copper/Automobile/Sheet metal Industry atleast one industry exp. Interested candidates contact on- 8222822052

Installing, maintaining, and repairing electrical systems, ensuring safety and compliance with regulations, and troubleshooting electrical issues in medical and non-medical equipment Design, develop, and oversee complex electrical systems and components for industrial, commercial, or infrastructure projects. Review and approve electrical plans, ensure compliance with industry standards, and conduct risk assessments. Supervise junior engineers and technicians, providing technical guidance and mentorship. Coordinate with multidisciplinary teams, clients, and vendors to ensure timely project execution. Perform testing, troubleshooting, and quality assurance of systems. Stay updated with emerging technologies and integrate innovative solutions to enhance system performance and energy efficiency.

Shift Engineer Property and Asset Management What this job involves You will be ensuring that all technical services are maintained operational during your shift duty. Taking charge of entire technical assets in building, managing engineering team and supporting the Property Manager / Assistant Property Manager your team leader for coordinating for technical issues with client and occupants. Your key deliverables will be to: Manage and maintain electromechanical / utilities services at the site with the help of technician team. Prepare and implement planned preventive maintenance (PPM). Conduct inspections at site regularly to check for risk / defects areas. Review work of subordinate staff and provide guidance when needed. Ensuring the documentation, checking and follow up of the assets under defect liability period and AMC/CAMC in a tracker. Be responsible for hiring, training and development of shift engineers and maintenance staff. Formulating suitable budgeting controls and Monitoring SLAs & KPIs for JLL and outsourced agencies towards effective service deliverance. Maintaining service level agreements and keeping performance indicator scores above excellence. Ensuring timely renewal of the agreement, submission of invoices and follow-ups for the payments. Overseeing all vendor quotations and invoices. Ensure proper signoffs for attendance and all the required details for cost sheet submission. Ensuring timely submission of client approved cost sheet to JLL office and following up for the invoice. Schedule monthly vendor meeting to discuss on daily matters & ensure corrective actions are taken for the same. Planning and implementing for energy conservation. Prepare monthly readings sheet with occupants and ensure all check-sheets and logbooks are being filled properly as per the schedule Maintain history cards for all equipments. Attend major complaints & escalate to senior & co-ordinate with technical staff if necessary. Ensure work permits are in place and safe working practices /procedures are followed. Assist the Property Manager/ Assistant Property Manager/ Technical Manager in conducting risk assessment of the building operations and work towards mitigation of highlighted inherent risks and in conducting root cause analysis in case of system failure and breakdowns. Create corrective, preventive and emergency response action plans. Take part in evacuation Drills and be a part of ERT/QRT team. Maintain engineering and other reports like DMR and MMR. Work closely with the regional RO / HO / SME/ Training teams and ensure closures of all required reports. Facilitate the services under the Slogan No Safety No Work. Reporting: You will be working with our operations team and reporting to the Property Manager / Technical Manager. Sound like you Here is what were looking for: Being Analytical and Meticulous Your role will involve coordination with various teams. You will be paying attention to detail and have excellent problem-solving skills. You will be using logic to trouble shoot problems; and assign and monitor maintenance projects. You should have a good knowledge of the working procedures. Qualifications You will have a Degree / Diploma in Electrical/Mechanical OR any equivalent, with min 3-5 years of work experience in Real Estate/ Hotel or Construction Industry. For residential sites candidates with residential experience will be preferred.

This role involves the development and application of engineering practice and knowledge in designing, managing and improving the processes for Industrial operations, including procurement, supply chain and facilities engineering and maintenance of the facilities. Project and change management of industrial transformations are also included in this role. - Grade Specific Focus on Industrial Operations Engineering. Develops competency in own area of expertise. Shares expertise and provides guidance and support to others. Interprets clients needs. Completes own role independently or with minimum supervision. Identifies problems and relevant issues in straight forward situations and generates solutions. Contributes in teamwork and interacts with customers.

Role & responsibilities : # Experience to set-up Cattle feed new plant or factory is preferred. # Candidate should open to travel on different location of company # Should have experience in Capex planning ,Purchase and implementation 1. Fabrication Process Management : Supervise and manage the entire feed fabrication process, including the mixing, grinding, pelletizing, and packaging of cattle feed products. Ensure that all equipment used in the fabrication process (e.g., grinders, mixers, pellet machines, etc.) is properly calibrated and operates efficiently. Coordinate production workflows to meet demand while minimizing downtime and ensuring the quality of final products. Monitor and analyze the performance of all fabrication processes, identifying areas for improvement and implementing optimization strategies. 2. Team Leadership and Development : Lead and manage a team of fabrication operators, technicians, and laborers. Provide training and support to ensure staff are knowledgeable about fabrication processes, equipment operation, and safety protocols. Assign daily tasks, track progress, and ensure that all employees adhere to production schedules and quality standards. Conduct performance reviews, provide feedback, and implement continuous development programs to improve staff efficiency and skill levels. 3. Equipment and Maintenance Oversight : Ensure that all fabrication equipment and machinery are properly maintained and functioning at peak efficiency. Work closely with the maintenance team to schedule regular preventative maintenance and repair activities. Troubleshoot and resolve any technical or mechanical issues with equipment to minimize disruptions to production. Manage the installation and commissioning of new equipment, ensuring it integrates smoothly with existing processes. 4. Quality Control and Compliance : Monitor and enforce quality control measures throughout the fabrication process to ensure consistency and compliance with feed safety standards. Ensure all raw materials (grains, additives, nutrients) meet required specifications before entering the fabrication process. Conduct regular checks and audits to ensure the proper functioning of equipment, adherence to quality protocols, and the delivery of products that meet customer specifications. Maintain records of fabrication quality control, including testing, inspections, and corrective actions taken. 5. Safety and Environmental Compliance : Oversee the safety and cleanliness of the fabrication area to ensure it adheres to company and regulatory safety standards. Ensure the safe operation of machinery and tools, and implement safety training programs for all team members. Ensure compliance with environmental regulations, including waste management, emissions control, and sustainable resource use. Manage workplace hazards and risks, and implement safety measures to reduce accidents and ensure a safe working environment. 6. Inventory and Resource Management : Oversee the procurement, storage, and use of raw materials (such as grains, protein meals, vitamins, etc.) necessary for the fabrication process. Coordinate with the inventory team to maintain appropriate levels of materials to avoid production stoppages. Ensure the optimal use of resources, including labor, materials, and machinery, to reduce costs and improve productivity. Implement best practices for minimizing material waste during the fabrication process. 7. Production Reporting and Documentation : Maintain accurate records related to the fabrication process, including production outputs, inventory usage, equipment maintenance, and employee activities. Generate regular reports for senior management on production metrics, including performance against targets, quality control results, and resource utilization. Identify trends, report on inefficiencies, and provide recommendations to improve production performance. Qualifications : Education : Bachelors degree in Animal Science, Agriculture, Food Science, Mechanical Engineering, Industrial Engineering, or a related field. Additional certifications in manufacturing, quality control, or process optimization (such as Lean Six Sigma) would be advantageous. Experience : 5+ years of experience in cattle feed production, fabrication, or manufacturing operations. Proven experience in managing teams, overseeing production processes, and maintaining equipment in an industrial or food processing environment. Prior experience in fabrication or machinery operations, including hands-on knowledge of feed formulation and processing equipment.

Qualifcation: Diploma/ B.E Mechanical About AvioHeliTronics : AvioHeliTronics is a technology-driven engineering and manufacturing company dedicated to precision, innovation, and excellence. We specialize in delivering mission-critical components for aerospace, defense, and high-precision industries using cutting-edge tools like Solid CAM and Solid Works. If youre passionate about modern manufacturing and want to work on challenging, high-impact projects, we want to hear from you. Role Overview: A technically skilled and proactive professional responsible for ensuring the smooth and efficient operation of machinery, equipment, and systems. The Maintenance Engineer performs regular inspections, preventive maintenance, and timely repairs to minimize downtime and extend equipment life. Strong problem-solving abilities and hands-on technical expertise are essential for improving operational reliability and efficiency. Roles Responsibilities: Good knowledge about machine maintenance, productive maintenance, corrective maintenance and utility maintenance. Perform day-to-day trouble shooting and breakdown maintenance of CNC and industrial machines. Troubleshoot and repair mechanical, electrical, and hydraulic systems efficiently. Knowledge about mechanical, PLC, hydraulic and pneumatic problem solving. Proficiency in reading and understanding mechanical drawings. Maintain accurate records of maintenance activities, repairs, and equipment history. Ensure compliance with health, safety, and environmental regulations. Support installation, testing, and commissioning of new machinery and systems. Manage spare parts inventory and ensure availability of necessary tools and components. Collaborate with production, operations, and engineering teams to improve equipment efficiency. Participate in safety audits, inspections, and risk assessments. Skills Required Degree or diploma in Mechanical, Electrical, or Industrial Engineering (or related field) Proven experience as a maintenance engineer in a manufacturing or industrial setting Strong knowledge of mechanical systems, electrical circuits, pneumatics, and hydraulics Understanding of safety standards and regulatory compliance (e.g., OSHA, ISO) Analytical mindset with strong problem-solving and troubleshooting skills Ability to work independently and as part of a team

Inspecting and maintaining buildings electrical system. Conducting routine maintenance and repairs Fixing faulty wiring. Replacing electrical equipment / motors / etc Ensuring equipment runs smoothly and safely trouble shooting problems. Required Candidate profile Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair Diagnose malfunctioning systems, apparatus, and components.

FREE JOB! FREE JOB! Company Name : GENERAL INDUSTRIAL CONTROLS (GIC) PVT. LTD. Location : Bhosari, Pune Position: Onroll Trainee Trade - Electronics Mechanic Electrician, Electrical,Wireman, Shouldering,Mo.Repairing Qualifications : Diploma: 15,800/- Graduation: 14,700/- BE/BTech: 16,300/- Company Facility : 8-Hour Shift Canteen Facility 2000 Attendance Bonus Contacts : Hr Sapna Mam - 92265 62301 Hr Mam - 93226 76773 Document :- Resume Aadhar Card Pan Card Bank Details 4 Passport Size Photo All Education Certificates Note:- Shoes Are Compulsory For The Interview.

Responsible for supervising & coordinating a team of workers. Ensures that all tasks are completed safely, on time, & according to project specifications. Oversees daily operations, assigns duties, monitors progress, & enforces safety standards. Required Candidate profile ITI/Diploma in Mechanical / I&E / Fabrication / Civil candidates with good English communication skills. Experience: 1+ years in mechanical or industrial project. Perks and benefits OT, Visa, Food, Accommodation & Transportation

- Undergo training related to Maintenance practices & procedures - Observe the abnormalities in assets, if any, and communicate to immediate Supervisor and Executive for necessary corrective actions - Perform all the types of maintenance of rotating equipment as per maintenance procedures of respective equipment standard with all safety measures and work quality standard - Suggest corrective ideas and modification to improve reliability of equipments - Get duly approved work permit with zero tolerance on safety and quality of repair and maintenance & as per priority communicated - Communicate abnormalities and any deviation in the quality of work during maintenance of the rotating equipment to the Supervisor and Executive (Maintenance) for necessary corrections - Ensure that all types of maintenance activities are to be carried out as per the maintenance procedures of Equipment Standard with Zero Tolerance on quality of work

Senior Electrical Engineer to lead the planning, design, execution, and supervision of electrical works across our projects. The candidate must have sound technical knowledge, leadership ability.

Role & responsibilities 1) Responsible for general mechanical maintenance work to meet quality objectives set by company management. 2. Responsible to maintain maintenance related records as per QMS requirement. 3. Responsible for planned & preventive Maintenance, repair, modify and improve machine to meet the quality objective. 4. Responsibility to perform daily machine trouble shooting, machine servicing to reduce machine down time and to understand production and related procedures to carry out required maintenance. 5. Responsibility to maintain machine spare parts and inventory and also keep track of the locations of all essential mechanical items so as to be able to retrieve for immediate replacements. 6. Responsible in keeping and maintaining SS in factory premises 7. Participation in regular internal and external audits on the quality systems. 8. Identify areas for continual improvement 9. Responsible to follow safety norms as and when required. 10. To do any other job assigned by Superior/ HOD/ Management 11. Responsible to report job completion of the entire task to Maintenance Manager for further evaluation. 12. Responsible for all regulatory and legal requirements for all plant electrical and mechanical systems and also keep track for any change in the related policies Preferred candidate profile

We are looking for a Maintenance officer to handle maintenance of plant equipment's like conveyors, shredders, motors. 3+ yrs experience in waste management, Hands on with equipment installation, repair troubleshooting. Send CV to careers@recity.in.