213 Lv Jobs

Minimum 10 years of experience, out of which 02-03 yrs should be in the similar roleExperience in both Electrical and Instrument is must Required Candidate profile Candidate holding HV/LV and Comp Ex certificate will be given preference FPSO experience is required

Experience: Minimum 10+ years of experience in Oil & Gas Industry FPSO/On shore experience in mandatory. Handling the power distribution. Controlling/Monitoring HV/LV equipment's. Controlling /Monitoring Required Candidate profile Controlling/Monitoring Instruments.Startup and testing of equipment's.Should have previously worked in FPSO projects and understand the Oil & Gas industry. Would be a 28/28 rotation.

Handling the power distribution. Controlling/Monitoring HV/LV equipment's. Controlling /Monitoring troubleshooting of power plant. Required Candidate profile Controlling/Monitoring Instruments. Startup and testing of equipment's.

Electrical Design Engineering (MEP – Building Services) HT/LT Systems, Transformers, DG Sets, UPS Power Distribution & Lighting Systems Earthing & ELV Systems AutoCAD (mandatory), Revit MEP Load Calculations, Fault Level Analysis, SLD Preparation

Handling the power distribution. Controlling/Monitoring HV/LV equipment's. Controlling /Monitoring troubleshooting of power plant. Required Candidate profile Controlling/Monitoring Instruments. Startup and testing of equipment's.

Job Role The Regional Service Engineer will be responsible for commissioning, troubleshooting, and repairing Low Voltage Variable Frequency Drives (LV VFDs), PLCs, and HMIs across various industrial applications. The role includes providing application engineering support, handling customer complaints, managing spare part orders, and supporting regional service operations. The engineer will also contribute to generating service revenue and ensuring high customer satisfaction through timely and effective solutions. Key Responsibilities On-Site Service & Application Support Commissioning of LV VFDs, PLCs, and HMIs across diverse industrial applications. Provide application engineering support, including drive parameterization, PLC programming, and HMI configuration. Troubleshoot, diagnose, and repair Drives, PLCs, and HMI hardware/software issues. Deliver customer training on Drives, PLCs, and HMI applications. Customer Support & Complaint Handling Handle customer complaints with root-cause analysis and corrective actions. Prepare and submit detailed failure analysis and service reports. Provide backend technical support to the regional service and sales teams. Repair Center & Operations Manage repair and replacement of drives, PLCs, and HMI modules/components. Ensure process compliance, documentation, and quality control in repairs. Oversee day-to-day functioning of the regional repair center. Spare Parts & Order Execution Prepare quotations for repair services and spares. Handle order booking, execution, and on-time delivery. Coordinate with supply chain and logistics to maintain spare availability. Business Development & Revenue Generate spare parts and service revenue in the assigned region. Promote AMC (Annual Maintenance Contracts), service packages, and spares. Support sales with application insights and technical presentations during customer interactions. Preferred candidate profile Education: BE / B.Tech in Electronics / Electronics & Telecommunications (or equivalent). Experience: 5+ years of experience in service, application support, commissioning, or maintenance of Drives, PLCs, and HMIs. Hands-on experience in troubleshooting electronic hardware and application programming. Prior customer-facing experience in service/application engineering preferred. Technical Skills Strong knowledge of AC Drives (VFDs), PLC programming, and HMI configuration. Understanding of industrial communication protocols (Modbus, Profibus, Profinet, Ethernet/IP, etc.). Ability to read and interpret electrical schematics and application diagrams. Familiarity with industrial process automation and control systems. Soft Skills Excellent customer relationship and communication skills. Strong analytical and problem-solving mind set. Effective presentation and training delivery abilities. Ability to manage multiple priorities with minimal supervision. Good reporting and documentation skills. Job Location Lucknow, Utter Pradesh

Experience: Minimum 10+ years of experience in Oil & Gas Industry FPSO/On shore experience in mandatory. Handling the power distribution. Controlling/Monitoring HV/LV equipment's. Controlling /Monitoring Required Candidate profile Controlling/Monitoring Instruments.Startup and testing of equipment's.Should have previously worked in FPSO projects and understand the Oil & Gas industry. Would be a 28/28 rotation.

Minimum 10 years of experience, out of which 02-03 yrs should be in the similar roleExperience in both Electrical and Instrument is must Required Candidate profile Candidate holding HV/LV and Comp Ex certificate will be given preference FPSO experience is required

Job Description Summary Product Design/Requisition Engineering of Drives products - Electrical Job Description Essential Responsibilities: LV/MV Drive Engineering Design and development of LV/MV Drives Understand product / project specifications and convert the specification into electrical schematic Proficient in Electrical component specification, sizing, selection and analysis Proficient in preparing SLD, Schematics, GA, BOM and reports Knowledge in PLM and Bill of Material preparation Design and execution of Engineering work packages with focus on quality, costs, schedule and resources Coordination of work packages within a team and global stakeholders Maintain ownership of all engineering work packages associated with specific projects. Knowledge in Electrical design tool Eplan, Auto CAD preferred Thorough understanding of Global Electrical Codes (IEC, UL, NEC, NFPA) Analytical and innovative approach in problem solving Collaborate with other GE PC businesses to understand GE Power Conversion technologies and how to apply them Ensure projects are completed within schedule and budget. Design system/equipment to meet reliability, testing standards, manufacturability, material and cost guidelines Verify functional performance of prototype hardware under all specified operating conditions. Support Manufacturing of equipment at Factory / Vendor facility Document functional test requirements and conduct test according to applicable standards (UL/IEC etc.) /conduct project FATs. Coordinate with System Engineer and Program / Product / Project manager execution on a continuous basis. Willing to travel on short notice within base country and overseas for short/long term assignments Qualifications / Requirements: Masters / Bachelors Degree in Electrical engineering from reputed College/University Min. 2+ years in Electrical design and study experience in Industry / marine / O&G / Power sectors Preferred experience/knowledge in Electrical design / Simulation tools like AUTOCAD / E-Plan Knowledge and application of International Standards. Ability to adapt and multitask with project/application engineers PLM, Primavera experience are added advantage Desired Characteristics Demonstrate excellent verbal and written communication skills Willingness to learn with passion Be self-motivated, creative and a team player, with ability to come up with unique solutions to complex problems Capable of working with multi-disciplined international team with good personal organization skills Self-Starter, demonstrate ability to work effectively within and between teams and as Individual Ability to energize teams and perceives change as an opportunity Ability to work effectively in a culturally diverse and highly matrix environment. Willing to work extended hours during the week, at weekends/holidays at critical times Proficiency in French/German language will be an added advantage Additional Information Relocation Assistance Provided: No

What are my responsibilities? 1. Service Engineer - Installation, Testing & Commissioning, Maintenance, Troubleshooting 2. Excellent proficiency in LV & MV AIS & GIS Products, Relay 3. Proficiency in Protection & Automation will addon advantage 4. Responsibility will include 80-90% travelling What do I need to qualify for this job? B.E. - Electrical / Electronics/ Mechanical 5+ years experience in Electrical systems Must have good communication skills

Responsibilities: * Collaborate with cross-functional teams on project planning & execution * Manage production processes from start to finish * Oversee electrical panel fabrication & sheet metal work

Project lead ensuring safe, timely, and cost-effective completion. Manages schedules, resources, safety, reporting, procurement, billing, documentation, and client coordination. Oversees installation, testing, and final handover with full compliance

Job Description Summary Lead Design & Development, Sizing, Simulation, Testing & Validation, Certification of LV/MV - VSD/ VFDs, SFC and High Current Rectifiers. Job Description Essential Responsibilities: LV/MV Drive Engineering Power Electronics (AC/ DC systems)for SFC and High Current Rectifiers. Drive & Filter Sizing, Product hardware design loss budget calculation Earth & Protection circuitsArc Flash Calculation/ RCA. Understand product project specifications and realize requirements to design using calculations, modeling and simulations. Design system/equipment to meet reliability, testing standards, manufacturability, material and cost guidelines Prepare & validate Design documents - Configurations, principles of operation, application guidelines, specifications, BOM, SLD & drawings as per requirement. Verify functional performance of prototype hardware under all specified operating conditions. Support Manufacturing of equipment at Factory Vendor facility Document functional test requirements and conduct test according to applicable standards (UL/IEC etc.)conduct project FATs. Coordinate with System Engineer and Program Product Project manager execution on a continuous basis. May require travel as required. Qualifications Requirements: Bachelor or Master Degree in Power Electronics or Electrical Engineering or Equivalent Min. 10+ years of Power electronics design & testing expertise for Industrial drives Preferred experience/knowledge in Electrical design Simulation tools like AUTOCAD E-Plan and MATLAB/Simulink In-depth knowledge of MotorsDrive control Systems. Desired Characteristics Demonstrate excellent verbal and written communication skills Mentor & Guide team Self-Starter, demonstrate ability to work effectively within and between teams and as Individual Ability to energize teams and perceives change as an opportunity Ability to work effectively in a culturally diverse and highly matrix environment.

Job Description Summary As an Engineer Control & Protection at GE Vernova Grid Solutions, you will play a crucial role in designing, implementing, and optimizing protection relay systems for EHV/HV substations considering the safety/quality/Cost/time delivery criteria. Your expertise will ensure the reliability and efficiency of power systems, supporting our global operations across various regions. This role involves in the secondary engineering activities (Control & Protection, Substation Automation Systems, Interface Engineering, Telecom Requirements & LV Auxiliary Systems for EHV/HV Electrical Substations (AIS / GIS / HVDC / FACTS / STATCOM / Onshore / Offshore / Renewable/etc.,) The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role, the candidate will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. The candidate will work with GSI Global Engineering Center (GSI GEC) to coordinate with the GSI Regions / Business Lines / as per Project requirement. Job Description Roles and Responsibilities The role demonstrates leadership in communicating business goals, programs, and processes for an area or business segment. In this role you will utilize your experience or expertise to solve problems, develop and execute objectives for self and others, and have the ability to effect short-term and long-term business goals. Provide technical leadership and interface with GSI Regions/GE Vernova Business Lines to estimate the optimized manhour cost for the engineering activities / other required activities for the execution of the project / Tender. Prepare and present technical data to internal and external customers. Document and communicate results of technical data generated. Participate on teams assigned to address specific organizational initiatives. Share engineering information and promote open dialogue. Prepare invention disclosures to protect the technology that provides a competitive advantage to the business. Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures. Knowledge on Electrical Power systems and load flow and short circuit studies. Experience of Control and Protection engineering up to 765kV/400kV/220KV and HVDC Substations (AIS/GIS/SOLAR/WIND). Ability to design and prepare scheme drawings as per project requirement in anyone of E-CAD Tool for min 2-3 years of experience (Ex. EB software/E-Plan/ AutoCAD Electrical/equivalent) Experience of Substation automation system based on IEC61850-8-1(Station Bus) & IEC 61850-9-2(Process Bus) Database Preparation in the automation/RTU software. Experience in IO Mapping with respect to the scheme drawings/troubleshoot of database issues in SAS system / RTU based system. Knowledge on PLCC/FOTE engineering and able to interface between CRP & SAS with Telecom Equipment. Knowledge on Major AIS & GIS components like Circuit breakers, Isolators, CSD, PDM & Interlocks scheme. Knowledge on Transformers/Reactors & associated Conditional Monitoring Devices etc. Knowledge on Process Bus oriented digital CT/VTs & associated Circuit Breakers & Isolators Experience in CT and VT and its sizing calculations. Knowledge of different make Numerical protection relays and BCUs. Knowledge on protection relay application / setting calculations and coordination. Experience in control cable engineering in substations. Experience in the LV/LT auxiliary systems. Knowledge on Relay Testing, Equipment Testing, Control / Protection scheme testing & SAS Commissioning experience (min 1 year) shall be given additional weightage. Required Qualifications Bachelors (or) masters degree in electrical engineering. Min 4 to 8 years in substation protection relay systems within EHV Electrical Substations, Oil & Gas or Power Transmission industries. Experience in EPC (Engineering, Procurement, Construction) environments with multidisciplinary teams. Desired Characteristics Strong oral and written communication skills. Strong interpersonal and leadership skills. Demonstrated ability to analyze and resolve problems. Demonstrated ability to lead programs / projects. Ability to document, plan, market, and execute programs. Established project management skills. Fluent in English; additional language (any foreign Language) is a plus. Willingness to travel internationally as required. Proven technical leadership in a complex system engineering development environment. Proactively serves on cross functional leadership teams; Makes decisions independently; Pulls in experts when needed. Key Competences Technical Expertise: In-depth understanding of substation protection systems, relay technologies, relay tripping philosophies, substation automation systems, Interface Engineering, LV Auxiliary Systems & Telecom Panels. Project Management: Ability to manage multiple projects, prioritize tasks, and meet deadlines. Communication: Excellent verbal and written communication skills for effective customer and team interactions. Leadership: Strong leadership and team coordination abilities to guide and mentor junior engineers. Problem-Solving: Proficient in identifying issues and implementing effective solutions. Quality Focus: Commitment to maintaining high standards of quality and compliance.

Job Description Summary Become part of a winning team and help to deliver the Green Energy transition. Job Description As LV Secondary Project Engineer , you will be a part of LV, Control and Automation team, reporting directly to the Engineering Manager. You will be a part of a highly motivated and dynamic team of engineers working on the requirements, design, integration, installation, and commissioning Control and Protection Systems for HVDC. The role gives an excellent opportunity to motivated engineers to expand their project management skills and personal development within an international project organization delivering complex HVDC projects. LV secondary activities covers, among others: AC Protection Single Line Diagram HV electrical control and interlocking principles Technical specifications (control cable, cubicles, ) Cubicles design Detailed electrical schematics. Roles and Responsibilities As LV Secondary Project Engineer, you will be responsible to lead your project team to deliver your LV secondary project scope, starting from Customer requirements capture till delivery of equipment to the customer. This includes the following activities: Define and maintain scope for your project based on customer requirements. Define and maintain the detailed Project Planning Smartsheet aligned with P6 plan. Lead the team to deliver as per defined execution plan. Define and maintain Risk Register and escalate high risks to project team. Review planned hours, Cost-To-Completion hours vs Budgeted hours. Adhere to the GE HVDC operation rhythm. Follow the departments standard design practices, engineering reviews and guidelines. Ensure resources plan in place. Accountability on the On-Time-Delivery and say-do ratio KPIs for the project. Raise Change Request when required following a budget deviation or a change of scope. Report as per the defined operating mechanism the project progress, including achievements, budget status, risks review and resource plan, look ahead. Represent LV Secondary team during the customer meetings and with GE partners. Travel as needed to attend customer meeting, witness type testing in presence of customer. Actively share and learn good practices and lessons learned to implement in the project for better project execution. Interface with equipment supplier and reviewing in-house designs and those produced by external contractors and analyse a variety of engineering data, documents, and reports. Support department Continuous Improvement activities. Required Qualifications Degree in Electronics/Electrical engineering or related field. Strong experience in project management: planning, tracking, reporting. Strong knowledge about Engineering Tools & Processes Basic knowledge of LV secondary design, preferably in substation/power plant environment. Strong analytical & critical thinking mindset Strong problem-solving skills. Strong communication skills Conflict management skills Influencing skills Lean and Continuous Improvement mindset Availability to travel ~10% of time Languages: English is required Desired Qualifications Basic knowledge of HVDC systems Experience in developing electrical designs for industrial control systems preferably in substation/power plant environment.

Role & responsibilities 1. Should have Experience in design and development of Electrical & Power electronics components like converter, inverter modules, battery charger based on the requirements 2. Prior Experience of component qualification programs and new product development in an automotive/ machinery environment is a distinct advantage. 3. Experience in developing electrical components Temperature sensors, actuators, solenoids, motors, Drives, batteries, Contactors and knowledge of Analog circuits, Protection circuits, Controller hardware is an advantage. 4. Proficient in Modeling and simulation of electrical components. 5. Experience in design and debug of embedded microprocessor control systems desired. 6. Knowledge and experience of control systems and software testing and debug an advantage. 7. Capable of developing and executing test plans, interpreting test data, and developing and driving relevant corrective measures where necessary. 8. Previous experience in New Product Development (NPD) process, DFMEA, 6 Sigma, are desirable. 9. Apply systematic problem-solving skills and investigate product Quality and Reliability issues to find root cause and permanent corrective action design change recommendations. 10. Should Knowledge in PLM and Windchill is an advantage 11. Experience in Modelling and simulation would be advantage. 12. Exposure on Hardware design using Alitum would be beneficial Primary Skill 1. Design and Development of Automotive type component s, converters, inverters for HVAC & Transport Refrigeration systems. 2. Hands on experience in developing component DFMEA and test plan development and execution. 3. Create detailed documentation of power electronic components, including detailed specification drawings and Application Specification Documents. 4. Co-ordination of any required regulatory testing of Electrical / Electronic solutions at external agencies, including HALT (Highly Accelerated Life Test), EMC (Electro Magnetic Compatibility) testing, as required per regulatory standards 5. 5+ years' experience in electrical Product design and development. 6. Knowledge and ability to work within New Product Development (NPD) Process, with innate understanding of documented prerequisites and Milestone deliverables. 7. Knowledge of relevant electrical safety standards and protocols applicable to mobile AC/DC voltage systems. 8. Able to perform Modelling and simulation of electrical components using Matlab / Dymola tool. 1. Design and Development of Automotive type component s, converters, inverters for HVAC & Transport Refrigeration systems. 2. Hands on experience in developing component DFMEA and test plan development and execution. 3. Create detailed documentation of power electronic components, including detailed specification drawings and Application Specification Documents. 4. Co-ordination of any required regulatory testing of Electrical / Electronic solutions at external agencies, including HALT (Highly Accelerated Life Test), EMC (Electro Magnetic Compatibility) testing, as required per regulatory standards 5. 5+ years' experience in electrical Product design and development. 6. Knowledge and ability to work within New Product Development (NPD) Process, with innate understanding of documented prerequisites and Milestone deliverables. 7. Knowledge of relevant electrical safety standards and protocols applicable to mobile AC/DC voltage systems. 8. Able to perform Modelling and simulation of electrical components using Matlab / Dymola tool.

Job Description Summary As a Engineer Control & Protection at GE Vernova Grid Solutions, you will play a crucial role in designing, implementing, and optimizing protection relay systems for EHV/HV substations considering the safety/quality/Cost/time delivery criteria. Your expertise will ensure the reliability and efficiency of power systems, supporting our global operations across various regions. This role involves in the secondary engineering activities (Control & Protection, Substation Automation Systems, Interface Engineering, Telecom Requirements & LV Auxiliary Systems for EHV/HV Electrical Substations (AIS GIS HVDC FACTS STATCOM Onshore Offshore Renewable/etc.,) The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role, the candidate will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. The candidate will work with GSI Global Engineering Center (GSI GEC) to coordinate with the GSI Regions Business Lines as per Project requirement. Job Description Roles and Responsibilities The role demonstrates leadership in communicating business goals, programs, and processes for an area or business segment. In this role you will utilize your experience or expertise to solve problems, develop and execute objectives for self and others, and have the ability to effect short-term and long-term business goals. Provide technical leadership and interface with GSI Regions/GE Vernova Business Lines to estimate the optimized manhour cost for the engineering activities other required activities for the execution of the project Tender. Prepare and present technical data to internal and external customers. Document and communicate results of technical data generated. Participate on teams assigned to address specific organizational initiatives. Share engineering information and promote open dialogue. Prepare invention disclosures to protect the technology that provides a competitive advantage to the business. Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures. Knowledge on Electrical Power systems and load flow and short circuit studies. Experience of Control and Protection engineering up to 765kV/400kV/220KV/HVDC Substations (AIS/GIS/SOLAR/WIND). Ability to design and prepare scheme drawings as per project requirement in anyone of E-CAD Tool for min 2-3 years of experience (Ex. EB software/E-Plan/ AutoCAD Electrical/equivalent) Experience of Substation automation system based on IEC61850-8-1(Station Bus) & IEC 61850-9-2(Process Bus) Database Preparation in the automation/RTU software. Experience in IO Mapping with respect to the scheme drawings/troubleshoot of database issues in SAS system RTU based system. Knowledge on PLCC/FOTE engineering and able to interface between CRP & SAS with Telecom Equipment. Knowledge on Major AIS & GIS components like Circuit breakers, Isolators, CSD, PDM & Interlocks scheme. Knowledge on Transformers/Reactors & associated Conditional Monitoring Devices etc. Knowledge on Process Bus oriented digital CT/VTs & associated Circuit Breakers & Isolators Experience in CT and VT and its sizing calculations. Knowledge of different make Numerical protection relays and BCUs. Knowledge on protection relay application setting calculations and coordination. Experience in control cable engineering in substations. Experience in the LV/LT auxiliary systems. Knowledge on Relay Testing, Equipment Testing, Control Protection scheme testing & SAS Commissioning experience (min 1 year) shall be given additional weightage. Required Qualifications Bachelors (or) masters degree in electrical engineering. Min 5 to 8 years in substation protection relay systems within EHV Electrical Substations, Oil & Gas or Power Transmission industries. Experience in EPC (Engineering, Procurement, Construction) environments with multidisciplinary teams. Desired Characteristics Strong oral and written communication skills. Strong interpersonal and leadership skills. Demonstrated ability to analyze and resolve problems. Demonstrated ability to lead programs projects. Ability to document, plan, market, and execute programs. Established project management skills. Fluent in English; additional language (any foreign Language) is a plus. Willingness to travel internationally as required. Proven technical leadership in a complex system engineering development environment. Proactively serves on cross functional leadership teams; Makes decisions independently; Pulls in experts when needed. Key Competences Technical Expertise: In-depth understanding of substation protection systems, relay technologies, relay tripping philosophies, substation automation systems, Interface Engineering, LV Auxiliary Systems & Telecom Panels. Project Management: Ability to manage multiple projects, prioritize tasks, and meet deadlines. Communication: Excellent verbal and written communication skills for effective customer and team interactions. Leadership: Strong leadership and team coordination abilities to guide and mentor junior engineers. Problem-Solving: Proficient in identifying issues and implementing effective solutions. Quality Focus: Commitment to maintaining high standards of quality and compliance. This role involves enhancing the collaboration and efficiency between our global Regionssuch as North America, South America, Europe, Africa, and othersand the GSI GEC. Why we come to work: Our engineers are always up for the challenge - and were always driven to find the best solution. Our projects are unique and interesting, and youll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, youll be exposed to game-changing, diverse projects that truly allow you to play your part in the energy transition. What we offer: A key role in a dynamic, international working environment with a large degree of flexibility of work agreements, Competitive benefits, and great development opportunities - including private health insurance. Additional Information Relocation Assistance Provided: Yes

Job Description Summary As a Senior Lead Engineer Control & Protection at GE Vernova Grid Solutions, you will play a crucial role in designing, implementing, and optimizing protection relay systems for EHV/HV substations considering the safety/quality/Cost/time delivery criteria. Your expertise will ensure the reliability and efficiency of power systems, supporting our global operations across various regions. This role involves in leading the secondary engineering activities (Control & Protection, Substation Automation Systems, Interface Engineering, Telecom Requirements & LV Auxiliary Systems for EHV/HV Electrical Substations (AIS GIS HVDC FACTS STATCOM Onshore Offshore Renewable/etc.,) The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role, the candidate will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. The candidate will work with GSI Global Engineering Center (GSI GEC) to coordinate with the GSI Regions Business Lines as per Project requirement. Job Description Roles and Responsibilities The role demonstrates leadership in communicating business goals, programs, and processes for an area or business segment. In this role you will utilize your experience or expertise to solve problems, develop and execute objectives for self and others, and have the ability to effect short-term and long-term business goals. Provide technical leadership and interface with GSI Regions/GE Vernova Business Lines to estimate the optimized manhour cost for the engineering activities other required activities for the execution of the project Tender. Prepare and present technical data to internal and external customers. Document and communicate results of technical data generated. Participate on teams assigned to address specific organizational initiatives. Share engineering information and promote open dialogue. Prepare invention disclosures to protect the technology that provides a competitive advantage to the business. Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures. Knowledge on Electrical Power systems and load flow and short circuit studies. Experience of Control and Protection engineering up to 765kV/400kV/220KV and HVDC Project Substations (AIS/GIS/SOLAR/WIND). Ability to design and prepare scheme drawings as per project requirement in anyone of E-CAD Tool for min 4-6 years of experience (Ex. EB software/E-Plan/ AutoCAD Electrical/equivalent) Experience of Substation automation system based on IEC61850-8-1(Station Bus) & IEC 61850-9-2(Process Bus) Database Preparation in the automation/RTU software. Experience in IO Mapping with respect to the scheme drawings/troubleshoot of database issues in SAS system RTU based system. Knowledge on PLCC/FOTE engineering and able to interface between CRP & SAS with Telecom Equipment. Knowledge on Major AIS & GIS components like Circuit breakers, Isolators, CSD, PDM & Interlocks scheme. Knowledge on Transformers/Reactors & associated Conditional Monitoring Devices etc. Knowledge on Process Bus oriented digital CT/VTs & associated Circuit Breakers & Isolators Experience in CT and VT and its sizing calculations. Knowledge of different make Numerical protection relays and BCUs. Knowledge on protection relay application setting calculations and coordination. Experience in control cable engineering in substations. Experience in the LV/LT auxiliary systems. Knowledge on Relay Testing, Equipment Testing, Control Protection scheme testing & SAS Commissioning experience (min 1 year) shall be given additional weightage. Required Qualifications Bachelors (or) masters degree in electrical engineering. Min 12-15 years in substation protection relay systems within EHV Electrical Substations, Oil & Gas or Power Transmission industries. Experience in EPC (Engineering, Procurement, Construction) environments with multidisciplinary teams. Desired Characteristics Strong oral and written communication skills. Strong interpersonal and leadership skills. Demonstrated ability to analyze and resolve problems. Demonstrated ability to lead programs projects. Ability to document, plan, market, and execute programs. Established project management skills. Fluent in English; additional language (any foreign Language) is a plus. Willingness to travel internationally as required. Proven technical leadership in a complex system engineering development environment. Proactively serves on cross functional leadership teams; Makes decisions independently; Pulls in experts when needed. Key Competences Technical Expertise: In-depth understanding of substation protection systems, relay technologies, relay tripping philosophies, substation automation systems, Interface Engineering, LV Auxiliary Systems & Telecom Panels. Project Management: Ability to manage multiple projects, prioritize tasks, and meet deadlines. Communication: Excellent verbal and written communication skills for effective customer and team interactions. Leadership: Strong leadership and team coordination abilities to guide and mentor junior engineers. Problem-Solving: Proficient in identifying issues and implementing effective solutions. Quality Focus: Commitment to maintaining high standards of quality and compliance. This role involves enhancing the collaboration and efficiency between our global Regionssuch as North America, South America, Europe, Africa, and othersand the GSI GEC. Why we come to work: Our engineers are always up for the challenge - and were always driven to find the best solution. Our projects are unique and interesting, and youll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, youll be exposed to game-changing, diverse projects that truly allow you to play your part in the energy transition. What we offer: A key role in a dynamic, international working environment with a large degree of flexibility of work agreements, Competitive benefits, and great development opportunities - including private health insurance. Additional Information Relocation Assistance Provided: Yes

Job Description Summary As a Lead Mechanical Component and System Designer you will be an integral part of a dynamic team designing new hybrid energy products. The focus of the design work is delivering cutting edge power conversion systems (LV/MV Drives). An ideal candidate for this position will have experience in product design, development, and manufacturing of renewable hybrid systems. Job Description Essential Responsibilities: Electro-mechanical engineering & design ownership of LV and MV Drive systems intended for volume manufacturing. Provide mechanical design and analysis expertise through all phases of product development, from requirements definition through design and development, validation and product life-cycle support Prepare all necessary deliverables and lead the successful presentation at Design Reviews for all mechanical aspects of product development programs. Support/lead conceptual design studies and trade-offs that address product requirements such as cost, performance, flexibility, and reliability. Collaborate cross functionally with Engineering, Product Line, Projects, Supply Chain, and Partners to execute and deliver for competitive productive solutions. Follow and promote GE Vernova standards for high integrity and oversight of processes protecting Intellectual Property, export-controlled information, and strategic technology Support mechanical design strategies, contribute to multi-generation system and technology plans in conjunction with Product Line. Strong background in documentation of design work to ensure critical information is captured and available across the team Drive quick, complete technical root cause analysis of field issues and identify design related corrective actions to prevent recurrence Identify and execute cost saving ideas and strategies Drive lessons learned, best practices and standardization into drawings, specifications, design practices and processes Help Implement a strategy for balancing technical risk and speed to market Stay current with competitor developments, academic efforts, and potential future disruptive concepts Qualifications/Requirements: Bachelors/Master Degree in Engineering (Mechanical/CAD design Preferred) Mechanical Design with Development expertise (8-12 Years) in LV/MV drives Experience and In-depth knowledge in requisition engineering and cost reduction exercise Localization and VA/VE Expertise in new conceptualization, layout and equipment design/optimization with required technical specification Good knowledge in CAD tools, Sheet metal design and International standards/GD&T Exposure to Manufacturing process and Quality standards Ensure OTD /FTY of deliverables Technical and Risk management experience Demonstrate leadership and ability to motivate others to achieve results, strong influencing skills Lead. Experience to work with cross-functional teams and global assignments Self-starter, Initiator & Solution finder for critical problems with high motivation Excellent presentation and communication skills Fluent in English Desired Characteristics: Good knowledge and understanding in Simulation tools - PRO-E, Ansys, Creo Hands on experience in Container customization design Exposure in DFMEA & DFM will be an added advantage Six sigma DMAIC or DFSS will be an added advantage Ability to energize teams and perceives change as an opportunity Ability to work effectively in a culturally diverse and highly matrix environment Experience developing commercial products for volume manufacturing Demonstrated mechanical design and analysis experience Familiar with, but not limited to, sheet metal and busbar sizing and design, electrical equipment layout for creepage and clearance, shock/vibration/seismic product design Ability to travel and work with/in an international team Familiar with the new product development processes Relevant industry experience Ability to work effectively cross-functionally and with a globally distributed team to maximize results Demonstrated clarity of thinking to work through limited information and vague problem definitions Ability to weigh options quickly, take input from across team, and make technical decisions to push the pace of development Proactively identify and remove project obstacles or barriers on behalf of the team Willing to share knowledge, responsibility, and credit to establish trust, credibility, and goodwill across the team Self-driven and able to work under minimal supervision Excellent written and verbal communication skills Ability to interface with senior leadership with confidence and clarity Able to work well with global teams, including time-zone flexibility Additional Information Relocation Assistance Provided: Yes

Job Description Summary Product Design/Requisition Engineering of Drives products - Mechanical Roles and Responsibilities Concept and Basic Mechanical design Packaging of Electrical components Detail engineering and Validation of design NPI, Localization and Development of Drives products Mechanical Cost out & DMP activities. Required Qualifications Bachelors/Master Degree in Engineering (Mechanical/CAD design Preferred) Mechanical Design with Development expertise Min 5 yrs in LV/MV drives Experience and In-depth knowledge in requisition engineering and cost reduction exercise Localization and VA/VE Expertize in new conceptualization, layout and equipment design/optimization with required technical specification Good knowledge in CAD tools, Sheet metal design and International standards IEC/UL & GD&T Practical experience with TC/ PLM knowledge is preferable Exposure to Manufacturing process & Quality standards Ensure OTD /FTY of deliverables Technical and Risk management experience Flexible to work with cross-functional teams and global assignments Self-starter, Initiator & Solution finder for critical problems with high motivation Excellent presentation and communication skills Fluent in English Desired Characteristics Good knowledge and understanding in Simulation tools Exposure in Six sigma DMAIC or DFSS will be an added advantage Ability to energize teams and perceives change as an opportunity Ability to work effectively in a culturally diverse and highly matrix environment Knowledge and experience in using SAP and Teamcenter Experience of site or customer visits. Structured in approach and well organized Additional Information Relocation Assistance Provided: Yes

As a Senior Lead Engineer Control & Protection at GE Vernova Grid Solutions, you will play a crucial role in designing, implementing, and optimizing protection relay systems for EHV/HV substations considering the safety/quality/ Cost/time delivery criteria. Your expertise will ensure the reliability and efficiency of power systems, supporting our global operations across various regions. This role involves in leading the secondary engineering activities (Control & Protection, Substation Automation Systems, Interface Engineering, Telecom Requirements & LV Auxiliary Systems for EHV/HV Electrical Substations (AIS GIS HVDC FACTS STATCOM Onshore Offshore Renewable/etc.,) The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role, the candidate will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. The candidate will work with GSI Global Engineering Center (GSI GEC) to coordinate with the GSI Regions Business Lines as per Project requirement. Roles and Responsibilities The role demonstrates leadership in communicating business goals, programs, and processes for an area or business segment. In this role you will utilize your experience or expertise to solve problems, develop and execute objectives for self and others, and have the ability to effect short-term and long-term business goals. Provide technical leadership and interface with GSI Regions/GE Vernova Business Lines to estimate the optimized manhour cost for the engineering activities other required activities for the execution of the project Tender. Prepare and present technical data to internal and external customers. Document and communicate results of technical data generated. Participate on teams assigned to address specific organizational initiatives. Share engineering information and promote open dialogue. Prepare invention disclosures to protect the technology that provides a competitive advantage to the business. Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures. Knowledge on Electrical Power systems and load flow and short circuit studies. Experience of Control and Protection engineering up to 765kV/400kV/220KV and HVDC Project Substations (AIS/GIS/SOLAR/WIND). Ability to design and prepare scheme drawings as per project requirement in anyone of E-CAD Tool for min 4-6 years of experience (Ex. EB software/E-Plan/ AutoCAD Electrical/equivalent) Experience of Substation automation system based on IEC61850-8-1(Station Bus) & IEC 61850-9-2(Process Bus) Database Preparation in the automation/RTU software. Experience in IO Mapping with respect to the scheme drawings/troubleshoot of database issues in SAS system RTU based system. Knowledge on PLCC/FOTE engineering and able to interface between CRP & SAS with Telecom Equipment. Knowledge on Major AIS & GIS components like Circuit breakers, Isolators, CSD, PDM & Interlocks scheme. Knowledge on Transformers/Reactors & associated Conditional Monitoring Devices etc. Knowledge on Process Bus oriented digital CT/VTs & associated Circuit Breakers & Isolators Experience in CT and VT and its sizing calculations. Knowledge of different make Numerical protection relays and BCUs. Knowledge on protection relay application setting calculations and coordination. Experience in control cable engineering in substations. Experience in the LV/LT auxiliary systems. Knowledge on Relay Testing, Equipment Testing, Control Protection scheme testing & SAS Commissioning experience (min 1 year) shall be given additional weightage. Required Qualifications Bachelors (or) masters degree in electrical engineering. Min 12-15 years in substation protection relay systems within EHV Electrical Substations, Oil & Gas or Power Transmission industries. Experience in EPC (Engineering, Procurement, Construction) environments with multidisciplinary teams. Desired Characteristics Strong oral and written communication skills. Strong interpersonal and leadership skills. Demonstrated ability to analyze and resolve problems. Demonstrated ability to lead programs projects. Ability to document, plan, market, and execute programs. Established project management skills. Fluent in English; additional language (any foreign Language) is a plus. Willingness to travel internationally as required. Proven technical leadership in a complex system engineering development environment. Proactively serves on cross functional leadership teams; Makes decisions independently; Pulls in experts when needed. Key Competences Technical Expertise: In-depth understanding of substation protection systems, relay technologies, relay tripping philosophies, substation automation systems, Interface Engineering, LV Auxiliary Systems & Telecom Panels. Project Management: Ability to manage multiple projects, prioritize tasks, and meet deadlines. Communication: Excellent verbal and written communication skills for effective customer and team interactions. Leadership: Strong leadership and team coordination abilities to guide and mentor junior engineers. Problem-Solving: Proficient in identifying issues and implementing effective solutions. Quality Focus: Commitment to maintaining high standards of quality and compliance. Additional Information Relocation Assistance Provided: Yes

Your role and responsibilities In this role, you will have the opportunity to be responsible for the sales of products/systems/services within a designated market/division, in line with the division strategy. Each day, you will achieve both qualitative and quantitative sales targets to ensure sustainable order growth, revenues, profitability, market share, and customer satisfaction. You will also showcase your expertise by identifying and developing new sales opportunities. In this role, you will report to the Sales/Business Manager and will be responsible for providing backend technical and commercial sales for electrical and automation systems, ensuring effective proposal preparation, tendering, and support to front-end sales teams across India and abroad. You will be mainly accountable for: Developing and executing sales strategies for electrical systems, automation solutions, and instrumentation offerings (LV/MV/HV systems, switchgear, transformers, DCS, PLC, SCADA, TAS). Identifying, pursuing, and converting new business opportunities with EPCs, industrial customers, and channel partners. Building and maintaining strong customer relationships, understanding their business needs, and positioning ABB's portfolio as the preferred solution. Supporting customers with technical knowledge during pre-sales discussions, system selection, and solution finalization. Managing sales negotiations, contract finalization, and order closure in line with ABB's commercial and compliance guidelines. Collaborating with internal engineering, product, and execution teams to ensure on-time delivery of projects and customer satisfaction. Monitoring competitor activities, market trends, and reporting business intelligence to shape sales strategies. Achieving sales targets and profitability goals assigned for the designated region/segment. Promoting ABB's value proposition through presentations, customer meetings, and industry events. Qualifications for the role B.E / B.Tech in Electronics / Electrical / Instrumentation Engineering from a reputed university. 6-8 years of experience with at least 5 years in Process Automation, Industrial Automation, or Instrumentation domain. Demonstrated ability in selling electrical systems and automation solutions in industries such as oil & gas, chemicals, power, and pharma. Comprehensive knowledge of Automation Systems and Instrumentation: DCS, PLC, SCADA, TAS. Basic understanding of oil, gas, chemical, and pharma industry production processes; electrical system selling experience. Proficiency in English (spoken and written); additional regional language skills. Proficient communication, negotiation, and presentation skills with the ability to operate at multiple levels. Creative problem-solving with a customer-first approach and high professional integrity. More about us The Energy Industries Division serves a wide range of industrial sectors, including hydrocarbons, chemicals, pharmaceuticals, power generation and water. With its integrated solutions that automate, digitalize and electrify operations, the Division is committed to supporting traditional industries in their efforts to decarbonize. The Division also supports the development, integration and scaling up of new and renewable energy models. The Division's goal is to help customers adapt and succeed in the rapidly changing global energy transition. Harnessing data, machine learning and artificial intelligence(AI), the Division brings over 50 years of domain expertise delivering solutions designed to improve energy, process and production efficiency, as well as reduce risk, operational cost and capital cost, while minimizing waste for customers, from project start-up and throughout the entire plant lifecycle. At ABB, we are dedicated to addressing global challenges. Our core values: care, courage, curiosity, and collaboration - combined with a focus on diversity, inclusion, and equal opportunities - are key drivers in our aim to empower everyone to create sustainable solutions. That's our story. Make it your story. This Position reports to: REC LRV Manager Title BO: Job Requisition Job Advert We value people from different backgrounds. Could this be your story? Apply today or visit www.abb.com to read more about us and learn about the impact of our solutions across the globe. #MyABBStory Fraud Warning : Any genuine offer from ABB will always be preceded by a formal application and interview process. We never ask for money from job applicants. For current open positions you can visit our career website https://global.abb/group/en/careers and apply. Please refer to detailed recruitment fraud caution notice using the link https://global.abb/group/en/careers/how-to-apply/fraud-warning

Position: EPLAN Engineer (On Third-party payroll position) About Company: MNC Location: Chennai Experience: minimum of 5 years of experience working in similar industry EPLAN. Qualification: Diploma/bachelors in electrical engineering from a reputed Indian Institute Strong communication and teamwork skills. Job Summary: We are looking for the best talent to create Low Voltage and Medium Voltage Power Distribution Systems for the datacenters of the future. The position requires design for work within electrical energy technology for direct use in our international projects. Within our team the focus is on the realization of distribution systems specifically for the data center industry. As an EPLAN engineer you are responsible for developing a detailed design in EPLAN. In this position you will work within the operating company Smart Infrastructure in the department of “Electrification & Automation” in an enthusiastic, relatively young and diverse team. Our department specializes in custom design and construction of energy solutions for demanding customers in the APAC region in the higher segment of the market. Job Description: User of EPlan P8 Within this position, the emphasis will be on the technical detail design with support from a experienced lead engineer. In addition, short lead times and high demands from our customers ensure a lot of dynamics during the realization. Activities within your position include: Creating an electrical design using EPLAN Developing wiring diagrams, terminal lists and material lists Perform supporting tasks for the electrical engineer, including creating and checking nameplate lists and consumer lists Addressing technical issues Process as built and red/blue comments Generating drawing packages using typicals/macros Employment Type : Contractual for 1 year and extendable Payroll: - Lobo staffing Solutions Pvt. Ltd.

Job Description Summary About GE Grid Solutions: At GE Grid Solutions we are electrifying the world with advanced grid technologies. As leaders in the energy space our goal is to accelerate the transition for a more energy efficient grid to full fill the needs of tomorrow. With a focus on growth and sustainability GE Grid Solutions plays a pivotable role in integrating Renewables onto the grid to drive to carbon neutral. In Grid Solutions we help enable the transition for a greener more reliable Grid. GE Grid Solutions has the most advanced and comprehensive product and solutions portfolio within the energy sector. Why we come to work: At GE Renewable Energy, our engineers are always up for the challenge - and were always driven to find the best solution. Our projects are unique and interesting, and youll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, youll be exposed to game-changing, diverse projects that truly allow you to play your part in the energy transition. What we offer: Working in an international team which is part of global Engineering HVDC Centre of Excellence within Grid Integration based in Noida A key role in a dynamic, international working environment with a large degree of flexibility of work agreements Competitive benefits, and great development opportunities Job Description Role Summary Responsible for leading a Team that designs, integration and testing of AC Control Automation System and LV Secondary Engineering and drive consistent design practices and common global processes for projects implementation. This includes the following. Recruit and Developing Department talent Engineering process Provide technical guidance. Drive consistent design practices and common global processes for projects. Safety, quality, on time delivery, cost We have delivery centres in Villeurbanne, France, Stafford, UK, Berlin, Germany & Noida, India and the candidate needs to ensure collaboration across all of our delivery centres and to drive to the maturity of both parts of our organization. Communication and status reporting will be essential to build a strong one team culture. Roles and Responsibilities Overseeing and managing day to day operations in the department which includes drive consistent design practices, common global processes for projects implementation and provide technical solution that meets the project and Tender objectives. Deliver leading edge collaborative design by ensuring teams are synchronised and aligned in their processes and approaches to deliver the highest standards safely and consistently. Works closely with internal and external customers to arrive at engineering specifications that optimise the commercial potential of new and existing products. Ensures that the available technologies and components are appropriately exploited in product design. Support and mentoring of less experienced team members and project engineers Execute and provide guidance for the analysis / evaluation of assigned projects that meet business standards, practices and procedures and the product / program requirements Responsible for recruiting, coaching, and/or developing organizational talent. Develop the engineering team structure, processes, and tools to develop, deliver, review and validate engineering outputs so that the business objectives are met; communicate understanding of the business objectives to engineers and stakeholders in our project team. Responsible for providing direction and/or guidance to exempt specialists and/or supervisory staff who exercise significant latitude and independence in their assignments. May supervise non-exempt employees. Fosters a diverse workplace that enables all participants to contribute to their full potential in pursuit of organizational objectives. Creates an entrepreneurial environment. Keeps the organization's vision and values at the forefront of decision making and action. Builds strategic partnerships to further departmental and organizational objectives. Develops and executes organizational and operational policies that affect one or more groups by utilizing technical/professional knowledge and skills. Makes decisions regarding work processes or operational plans and schedules in order to achieve department objectives. Manage the engineering resources, workload, schedule and project milestones. Execute and provide guidance for the analysis / evaluation of assigned projects that meet business standards, practices and procedures and the product / program requirements Responsible for coaching and developing department talent. Define the project work breakdown structure (WBS), resources and skill levels required to meet the delivery timescales. Required Qualifications Engineering degree or equivalent including power systems and power electronics subjects or proven equivalent knowledge and experience in HVDC business Experience of Leading team of LV Secondary and AC Control Automation System. Strong sense of urgency and ability to identify and manage team organisational risks. Proven skills in managing and leading team with strong technical background Strong written and verbal communication skills, experienced in creating and presenting to other stake holders. Knowledge of Control and Protection cubicle Circuit Diagram, field cabling protection relays, HV/MV/LV switchgear, IEDs and Distributed control system. Able to work to deadlines under pressure whilst maintaining the safety, quality and engineering integrity of the solution. Proven technical leadership in a complex system engineering development environment. Must be flexible with working hours and willing to travel globally. Additional Information Relocation Assistance Provided: No

Job Description Summary As a Senior Lead Engineer Control & Protection at GE Vernova Grid Solutions, you will play a crucial role in designing, implementing, and optimizing protection relay systems for EHV/HV substations considering the safety/quality/Cost/time delivery criteria. Your expertise will ensure the reliability and efficiency of power systems, supporting our global operations across various regions. This role involves in leading the secondary engineering activities (Control & Protection, Substation Automation Systems, Interface Engineering, Telecom Requirements & LV Auxiliary Systems for EHV/HV Electrical Substations (AIS GIS HVDC FACTS STATCOM Onshore Offshore Renewable/etc.,) The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role, the candidate will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. The candidate will work with GSI Global Engineering Center (GSI GEC) to coordinate with the GSI Regions Business Lines as per Project requirement. Job Description Roles and Responsibilities The role demonstrates leadership in communicating business goals, programs, and processes for an area or business segment. In this role you will utilize your experience or expertise to solve problems, develop and execute objectives for self and others, and have the ability to effect short-term and long-term business goals. Provide technical leadership and interface with GSI Regions/GE Vernova Business Lines to estimate the optimized manhour cost for the engineering activities other required activities for the execution of the project Tender. Prepare and present technical data to internal and external customers. Document and communicate results of technical data generated. Participate on teams assigned to address specific organizational initiatives. Share engineering information and promote open dialogue. Prepare invention disclosures to protect the technology that provides a competitive advantage to the business. Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures. Knowledge on Electrical Power systems and load flow and short circuit studies. Experience of Control and Protection engineering up to 765kV/400kV/220KV and HVDC Project Substations (AIS/GIS/SOLAR/WIND). Ability to design and prepare scheme drawings as per project requirement in anyone of E-CAD Tool for min 4-6 years of experience (Ex. EB software/E-Plan/ AutoCAD Electrical/equivalent) Experience of Substation automation system based on IEC61850-8-1(Station Bus) & IEC 61850-9-2(Process Bus) Database Preparation in the automation/RTU software. Experience in IO Mapping with respect to the scheme drawings/troubleshoot of database issues in SAS system RTU based system. Knowledge on PLCC/FOTE engineering and able to interface between CRP & SAS with Telecom Equipment. Knowledge on Major AIS & GIS components like Circuit breakers, Isolators, CSD, PDM & Interlocks scheme. Knowledge on Transformers/Reactors & associated Conditional Monitoring Devices etc. Knowledge on Process Bus oriented digital CT/VTs & associated Circuit Breakers & Isolators Experience in CT and VT and its sizing calculations. Knowledge of different make Numerical protection relays and BCUs. Knowledge on protection relay application setting calculations and coordination. Experience in control cable engineering in substations. Experience in the LV/LT auxiliary systems. Knowledge on Relay Testing, Equipment Testing, Control Protection scheme testing & SAS Commissioning experience (min 1 year) shall be given additional weightage. Required Qualifications Bachelors (or) masters degree in electrical engineering. Min 12-15 years in substation protection relay systems within EHV Electrical Substations, Oil & Gas or Power Transmission industries. Experience in EPC (Engineering, Procurement, Construction) environments with multidisciplinary teams. Desired Characteristics Strong oral and written communication skills. Strong interpersonal and leadership skills. Demonstrated ability to analyze and resolve problems. Demonstrated ability to lead programs projects. Ability to document, plan, market, and execute programs. Established project management skills. Fluent in English; additional language (any foreign Language) is a plus. Willingness to travel internationally as required. Proven technical leadership in a complex system engineering development environment. Proactively serves on cross functional leadership teams; Makes decisions independently; Pulls in experts when needed. Key Competences Technical Expertise: In-depth understanding of substation protection systems, relay technologies, relay tripping philosophies, substation automation systems, Interface Engineering, LV Auxiliary Systems & Telecom Panels. Project Management: Ability to manage multiple projects, prioritize tasks, and meet deadlines. Communication: Excellent verbal and written communication skills for effective customer and team interactions. Leadership: Strong leadership and team coordination abilities to guide and mentor junior engineers. Problem-Solving: Proficient in identifying issues and implementing effective solutions. Quality Focus: Commitment to maintaining high standards of quality and compliance.