42 Layout Preparation Jobs

As an Engineer - PCB Assembly at Data Patterns (India) Ltd., your role will primarily involve working in the field of electronics design and manufacturing. With a Diploma in Electronics and Communication Engineering or Electrical and Electronics Engineering, along with 8 to 10 years of experience in PCB Assembly, you will be responsible for various aspects of the assembly process. Your key skill sets should include expertise in SMT Line Plan, Line Balancing, Process Development, Assembly Process, Layout Preparation, PFMEA, Manufacturing Process, Process Improvement, and knowledge of DFM (Design for Manufacturing). It is essential that you have a thorough understanding of the entire assembly process and possess the ability to optimize it for efficiency. In this role, you will be expected to work on tasks such as Process Flow PFMEA, Material Flow management, Cycle Time optimization, setting up targets, monitoring OEE (Overall Equipment Effectiveness), implementing Statistical Process Control methods, initiating Corrective and Preventive Actions, and validating the assembly process. The ideal candidate for this position should have a total experience of 8 to 10 years in the electronics design and manufacturing industry, particularly focusing on PCB Assembly. This role is based in Chennai, and you can reach out to us via email at jobs@datapatterns.co.in or visit our office at Plot.No H9, 4th Main Road SIPCOT IT Park Off Rajiv Gandhi Salai (OMR) Siruseri Chennai - 603 103. If you are passionate about electronics, experienced in PCB Assembly, and equipped with the necessary qualifications and skills, we welcome you to join our team at Data Patterns (India) Ltd.,

Job Requirements Review the Specification Designing Cable Tray Modeling, Equipment modeling, Lighting and earthing layout preparation Selecting different type of Cable Trays Junction box Location drawings Cable schedule for Power and Instrumentation cables Preparing the BOM for cables and Trays etc. Should be Interacting with Inter disciplinary team for Plant layout, locating the instruments and Junction box etc. Work Experience Bachelor Degree in Engineering or Equivalent from an accredited University or College 5 to 8 years\ experience in Cable tray modelling Good knowledge in E3D/AutoCAD/Plant 3D. Ready to learn new tool & technologies.

Civil Structural Draftsman Stellar Civil Engineers Private Limited Responsibilities: Drafting & Preparing Drawings: Prepare AutoCAD drawings of Flyovers, Railway Bridges, and Road Bridges. Produce high-quality drawings based on inputs provided by civil structural engineers. Technical Assistance: Assist the team of structural engineers with drafting and detailing. Qualifications: Must have knowledge of AutoCAD 2D/3D drafting. Understanding of AutoCAD tools like layer management, dimensional style, layout preparation, and structural detailing. Diploma in Civil Engineering OR AutoCAD drafting course from ITI/Reputed CAD institute. 0 to 2 years of experience in AutoCAD drafting of bridges.

Job location: Tambaram, Chennai. About the Company: Gideon Automotive Industries is an auto ancillary unit established in the year 2013. We manufacture Electrical, Electro-Mechanical and electronic components such as solenoid valves, switches, solenoid coil assemblies, and sensors. The majority of the products are proprietary in nature. Gideon follows the latest manufacturing practices, implements IATF 16949 QMS and managed by professionals. Gideon is supplying products to reputed Tier-1 customers and OEM in automobile and non-auto industries in India and oversees. Gideon is growing at a CAGR of 35% since inception and positioned to grow much faster in the coming years. We offer a satisfactory working environment and believe in treating employees as its important asset. Roles & Responsibilities: Responsible for preparing drawing using Solid Works Design Software & Auto CAD. Knowledge of designing / detailing assemblies and sub - assemblies of Products. Knowledge in preparation of layouts, assembly drawings, detailed manufacturing drawings with necessary GD & T, preparation of Bill of material, maintenance of ECN, Drawing Revisions and Change level maintenance Create and update database of design records for future reference purposes Perform other design, new product Development activities as required. Knowledge in New Product Development using Customer input and developing products through Reverse Engineering concepts, product life cycle testing, design development activities. Studying existing Products, processes and implementing improvements Maintenance of design and new product development documents as per IATF 16949 QMS is must. Technical co-ordination with other functional departments like production, purchase, and marketing. Participating in CFT meetings, maintaining committed timelines and project files. Basic Requirements: Excellent written and verbal communication skills Good proficiency & hands on experience in using MS Office applications. Ability to act and operate independently with minimal daily directions from manager to accomplish the tasks. Share and collaborate effectively with others, create a positive team spirit. Desired Candidate Profile: BE Mechanical Engineering / Diploma in Mechanical Engineering qualifications with minimum 3+ years of experience in Automotive industry is preferred. Must have good knowledge in Solid Works & Auto CAD software. Knowledge in PPAP, APQP, DFMEA is preferred. Sound Understanding in GD&T in Customer Drawings. Candidates working in Electromechanical, Electrical and Electronics based product development area are preferred. More specifically Candidates working in Pneumatic and Automobile Sectors will be preferred. Candidate shall be creative, highly detail oriented and organised. Male Candidates are preferred. Candidates from Chennai (In & around Tambaram location) will be given preference. Candidates from MSME units with strong desire to learn and grow with the organisation are preferred.

Urgently hiring for Process Engineer - Offroll Company Name - EMS Manufacturing - Payroll - Adecco Address - Oragadam, Chennai, Tamil Nadu Position Title Engineering Assistant/Associate Engineer Department Industrial engineering Reports To Engineer/Sr.Engineer Job Summary "*Responsible for optimizing processes and enhancing productivity in a dynamic work environment by applying industrial engineering principles to improve operational efficiency and reduce lead time. *Estimating line requirements based on time and method studies, line balancing activities, and optimizing headcount through continuous process improvement and implementing new automation technologies *Layout preparation for new projects as well as existing process in AutoCAS" Key Responsibilities *Cycle time study and UPH report preparation,Line installation, Line balancing, Kaizen, Capacity planning, Labour efficiency calculation Educational Qualifications Diploma/B.E(Electronics/Electrical/Mechanical/Industrial engineering) Required Experience 2 to 4 Years Required Skills Time study,Method study, Autocad,Ms office,Data analayis/Data driven analysis, 5S, Problem solving skills, Communication skills Please reply back your updated CV and below details - and call back to 6366840271 Name - Total Experience - Present Salary - Expected Salary - Notice Period - Are you ready for 3rd party payroll Job ? - Are you ready for Oragadam Location ? -

Responsibilities Site Level sheet preparation and execution from drawing Prepare layouts, manage resources & coordinate teams Free meal

Senior/Lead Piping Design Engineer Overview PM Group is a leading International engineering, architecture, project and construction management firm. With a network of offices in Europe, Asia and the US and a multi-disciplined team of over 3,700 people, we deliver complex, capital projects in the life sciences, food and beverages, mission critical/ICT, advanced manufacturing, energy and environmental sectors. Due to our on-going success securing large-scale projects for 2024, we have a requirement for Senior Piping Design Engineer to join our Piping Department, Bangalore. Responsibilities Coordination with other PM Group offices to understand the scope of work, deliverables, time lines, man hours etc. Produce and check complex piping plans and layouts, piping isometrics sketches and electronic 3D models for equipment in accordance with project requirements, codes, specifications and procedures. 3D Piping Design Isometric generation from Process P&ID's. Stress Analysis. Clash checking for pipe clashes. Coordination of design with other design disciplines and vendors. Qualifications A degree in Mechanical Engineering. Minimum of 9 years piping design experience Minimum of 3 years experience in the use of Intergraph’s S3D & CADWorx suite of products Biopharmaceutical or API design experience.(Mandatory) Design experience with clients from Europe and the USA is an advantage. Good interpersonal and communication skills. Willing to travel to Europe for 1 to 3 month on selected projects. Design experience with clients from Europe and the USA is an advantage. Good interpersonal and communication skills. Willing to travel to Europe for 1 to 3 month on selected projects. Why PM Group? As an employee-owned company, we are inclusive, committed and driven. Corporate Responsibility and Sustainability are the heart of our new 2025 business strategy. Inclusion and Diversity are core to our culture and values. Wherever we work, we commit to a culture of mutual respect and belonging by building a truly inclusive Workplace rich in diverse people, talents and ideas. Valuing the contributions of all our people and respecting individual differences will sustain our growth into the future

Translate product level requirements into subsystem/item/component design criteria. Lead Own engineering release of subsystem design including component, part CAD Drawings, and BOMs through transmittal Develop and execute Validation verification of Subsystem/Module/Components on schedule at required cost, quality and performance levels Perform Engineering /Design calculations (mechanical) Develop and capture knowledge required to deliver subsystem level excellence through Design Creating 3D model/Reviewing the CAD drawing Manage design trade-offs between cost, aesthetics, performance, and other design attributes. Align current capability of architecture/ supplier/ manufacturing/ customer solutions to meet product attribute targets and identify solutions for projects where current capability does not align to targets. Co-ordinate to client/customer to transform their requirement in to drawing/document Participate in and lead Technical Design Previews as needed Communicate with interface department Material selection performing project planning, capital calendar management. Knowledge on System Engineering with Good analytical skills Hands on experience 3D modelling and system layout, piping Release Product / Component designs drawings as per project targets. Make sure correct location of Design Validation Verification Reports Other Essential Functions: Hands on experience SOLID works, AUTO CAD Knowledge of ASME design and material code Proficient in Strength of material and design Convergent with customers specification Preparation of documents data sheet for mechanical Buy out. Managing operations Working collaboratively with design engineers, operation engineers, purchasers and other internal staff Project management within cost and time constrained environments understanding and ensuring compliance with relevant health and safety regulations and quality standards providing advice and consultancy support Purchasing equipment SKILLS EXPERIENCE Minimum of 2 years experience in 3D modeling, CAD and layout preparation Experience in managing Mechanical engineering deliverable Familiarity with process controls and strategy as per ISO Ability to work well with others and lead by example Proficient in Word, Excel, and Adobe Acrobat Good communication skills with clients and employees At Fives Combustion System, and under the direction of the Dy. General Manager Engineering who is reporting authority, you will join the Engineering team. We are seeking someone who has a BE/B.Tech Mechanical Engineering / Diploma Mech with recognized institute/university with 2 years of experience in the field of Engineering or Process Equipment as an Engineer. If you are a self-starter, committed, confident then we are eager to change the world with you

A leading role within the Dealer Development team, person will be responsible for development of dealership sales and service infrastructure across South region. Dealer facilities branding in line with company s brand philosophy & strategy. Providing planning and guidance to dealers on dealer CI / SI standards Develops corporate identity / showroom identity program for the entire dealership network and implementation. Leads regular reviews and updates of Dealer standards, including Corporate identity manuals for Dealers, monitors actual retail centres situations; and conducts periodical audits as required. Identification and on boarding of SI/CI vendors. Localisation of SI/CI elements. Dealership layout preparation and approvals. Dealership project monitoring and ensuring dealership readiness and activation (ensuring optimum resources at the time of activation). Dealer Directory and Database management. (Details & Photograph of Infrastructure). Close coordination with the PR & Marketing strategy team/ Creative agency for the proper execution of dealership Inauguration / launch activities. Any other duties that may be reasonably requested by the manager.

Position - Assistant Manager /Senior Engineer / Manager /DM Role - Industrial Engineering 7 IE tool experience is must. Process Online & Process offline Activities. Application of Lean Manufacturing tools . ECRS and 7 Waste Analysis and reduced.

SMT mlb knowledge Facility Management Team Leading Budget Preparation Layout Preparation smart project EMS *Handling a team

Company Introduction: Forbes & Company Ltd. Bradma is market leader in marking and traceability solutions. It has very strong footprints in automotive industry, component manufacturing & general engineering. Company is growing at have aggressive growth plans to expand its product portfolio and market footprints. To lead this growth story, we are looking for young energetic dynamic professional to join the team. Candidate Profile: Experience - 3-6 Yrs (Experience in Marking Automation Systems, Traceability Solutions, Material Handling systems, Conveyors, SPM, Automobile - Machining Lines & Assembly Lines). Qualification - BE (Mechanical/Electrical). Location Waluj , Chh. Sambhajinagar (Aurangabad) Roles & Responsibilities: - Basic working knowledge machine building as well as machine elements such as mechanisms, pneumatic, controls, sensors, etc. Detailed study of RFQ to understand the requirement from sales/customer end. Conceptualization of the requirement into a drawings/flow charts/architecture. Feasibility Study for different applications. Cycle time calculations of automation. Station and line concept building, Layout preparations with respect to expectations from customers. Knowledge of PLC, Servo Systems, Software, IOT systems, MES systems. Technical Proposal writing with clear understanding of inclusion clauses writing. Project Cost estimation as on when required. Deciding sales Price and giving to National sales heads as on when required. Knowledge on AutoCAD & 3D software. Excellent in verbal and written communications. Expert in latest Microsoft office products like word, excel, PowerPoint presentations.

Apollo Pharmacies Ltd Job Description Designation Civil Junior Executive/ Executive Reports To Regional Projects Lead Job Location Multiple Role Title Job Summary The role manages Civil Works of stores at Apollo Pharmacy. This individual will be responsible to deliver project related activities and coordinate with cross functional business teams for Civil Works. The individual will be partnering with our vendors and Suppliers in planning and executing the projects. Key responsibilities for Civil Work: • Coordinating with vendors on the requirements to open stores and be able to monitor vendor activities. • Coordinating with vendors on estimations & cost structures for any new civil work. • Able to understand layout drawings of the stores, assets requirements and civil material quantities required for the store. • Cross verifying the vendor work orders with actual layout drawings. • Should coordinate with the team to order assets & monitor asset installations. • Able to deliver better quality in assets management & civil works. • Coordinate with vendor on timelines and handover outlets to the operations team. • Should be able to validate the assets and reusing of the assets. • Should be able to physically verify bills & measurements from the vendors against the work orders. Skills Required • Led a high impact driven role within retail for a growing organization. • Experience in working with store maintenance and process of new store identification • Experienced using in basic Microsoft Excel & Power Point • Up to date in market trends on rent, availability of spaces and geographic conditions of the area Soft parameters Required • Presentable and good communication skills Position Specification • Must have at least 2 to 5 years of retail civil works experience for opening new stores or renovating existing stores. • B.Tech Civil qualification must.

Role & responsibilities Layout & Logistics Engineer Qualification Diploma / Graduate in Civil Engineering Experience 8-20 years Proficiency Good knowledge in Layout and Logistics for ferrous and Nonferrous plants, Mining and Beneficiation plant. Basic Knowledge in working with Indian and foreign Standards. Ability in working using 3D Platform using Civil 3D, REVIT, AutoCAD. Understanding of process flow sheet and preparation of preliminary Plant General Layout. Knowledge on site selection study. Study of the basic inputs and take initiation to start the work for assigned Job. Preparation of Preliminary Plant General Layout from the basic assignment, design and document preparation. Detailed engineering for logistics services like Site development, Rail, Road, Drainage and Sewerage based on the applicable codes and softwares. Preparation of Technical Proposal and Bid evaluation. Interaction with client and other concerned agencies time to time for progress of the project. Development of technical reports such as Concept Note, Feasibility Study report, Detailed Project Report. Guiding working engineers and modelers Communication with other departments to get the complete input for an assigned Job. Preferred candidate profile As mentioned above

Role & responsibilities Expertise in rotating equipment like large capacity compressor, pumps (horizontal & vertical), packaged equipment (pressurizing system, dosing system etc.) with knowledge in applicable Indian and International codes and standards (API/HIS/IS). Should possess working awareness of design interface with other system engineers/contractors and statutory approval authorities. Experience in detail design of pump house, compressor plant for power plants, metro, hydel. Exposure to CFD analysis and sump model study of pumping system. Design calculations including pressure drop calculations, layout preparation, selection of materials, PID & PFD finalization Responsible for RFQ preparation, vendor bid document evaluation, detail design documents review and finalization Interface signoff with other system engineers/contractors Responsible for coordination with site team, QA, client and other stakeholders

Role & responsibilities (Capex Projects) Basic and detail engineering for all Projects activities executed in site. Datasheets, GA drawings and layouts review and approvals Capex preparation and its related activities SAP related activities like PR, SRN, Budget flow etc. Procurement activities and vendor follow-ups Co-ordinate and execute the HAZOP study and is responsible for its timely execution To co-ordinate with various project stake holder for timely completion of project work. To prepare the bar chart of execution of all projects and prepare monthly report for all projects Implement the project work as per Drawings (PFD, PID, Layout & GA Drawings). Prepare as-built drawings and handover the facility to maintenance department. Erection and commissioning of Projects with respect Quality, safety & time Vendor Bills certifications and accounting Equipment qualification and HVAC Validation Ensure self and contractor to follow the environment, health and safety rules Preferred candidate profile Diploma / B.E Chemical / Mechanical Engineering Background 7 to 10 years of overall experience, should have handled independent project executions SAP, AutoCAD knowledge Should ready to relocate to Hosur Reach out to saheed.s@omniactives.com to share cv or refer the suitable candidates.

System Design and Development: Lead the design process for solar PV systems, including layout, electrical schematics, and structural configurations. Ensure compliance with relevant codes, standards (e.g., NEC, IEC), and regulations. Optimize designs to maximize energy yield, reduce costs, and enhance system reliability. Project Planning and Coordination: Work closely with project stakeholders to develop design schedules and meet deadlines. Support feasibility studies, technical due diligence, and site assessments. Innovation and Technology Integration: Research and integrate emerging solar technologies, tools, and software to enhance system performance. Identify opportunities for innovation in design to support the companys sustainability and profitability goals. Key Skills and Qualifications: Bachelor’s degree in Electrical Engineering, Renewable Energy, or related field (Master’s degree preferred). 5+ years of experience in solar design and engineering, Proficiency in solar design software (e.g., PVsyst, AutoCAD, HelioScope) and familiarity with GIS tools. Strong knowledge of solar PV systems, including electrical and structural components. Understanding of grid interconnection, energy storage systems, and hybrid solutions. Proven track record of delivering complex projects on time and within budget.

Please share your CV on sv7@svmanagement.com Details of the Job : Defining the process flow for new products, Engineering design evaluation. Layout preparation in 2D & 3D. Design & establishment of process for new products / models implementation as per vehicle assembly Fixture design, Assembly line balancing, Time study using MOST Preparation of new layout or modification in existing for improving overall productivity of the TCF Create assembly operations/process sheets/SOP for vehicle assembly New product integration in existing assembly line Technical Requirements : Good hands on exposure to vehicle assembly process (TCF) & problem resolution Should have good communication skills & should be from automotive background Good hands on Catia, AutoCAD, MS Office software

Educational Qualification: Graduate/Post Graduate in Industrial / Electrical / Mechanical Engineering Relevant Experience: Experience in High-Voltage (HV) field for automotive battery production. Preferred international work in automotive community. RESPONSIBILITIES: Responsible for HV Batterypack production Layout planning. Project planning for machines and procurement and commisioning Develop concepts for Assembly line like Leak test, Cleanliness check etc. Plant Flow simulation. Preparing decision material for internal decisions. REQUIREMENTS: Experience in Battery line Industrial engineering Experience in Production Layout planning and preparation Experience in Plant flow simulations and relevant tools Very good in written and spoken in English. Enjoy working in international teams. Flexibility for international travel. Knowhow of CATIA for layout preparation is an added advantage

Job Description of Customer Solutions Engineer Purpose: As a CSE, you will provide technical solutions & Support for New Building Solutions. You will take ownership of successful tendering and knowledge transfer on the dedicated geographic area. For FL sales you will act as a primary point of contact for technical support and resources beyond. You will work closely with FL Sales. You will manage the tendering process ensuring required value engineering and optimized pricing are delivered promptly and quickly. You will be reading the customer specification together with the FL sales, translating it into the core specification, clarifying building interfaces (mechanical and electrical), identifying and coordinating engineering tasks with E&S nominated contact to deliver the full tender package to FL including e.g. layout, visual drawings, optimized sourcing & pricing. You will need to be the center of excellence in technical solutions. We expect you to have: Minimum 1 year of experience in Elevator & Escalator field. Deep knowledge of elevator products, components, installation, business challenges and sales environment. Strong technical knowledge of Elevator and Escalator products and required code regulations. Strong organizing, analytical and problem-solving skills. Knowledge in MS office ( excel & PPT) is required. Drive for results and persistence with a can-do attitude. Collaborative approach and cross-cultural communication skills. Strong customer focus and leadership skills. Fluent communication skills in English. Other languages are an asset. Responsibilities & Key activities: Work closely with customer specifications are understood (and challenged, if needed) and the right products are offered. Study customer Tender Documents and prepare Import offering . Understanding the traffic challenges in buildings and being able to optimize our solutions to overcome said challenges. Help Sales in arranging the technical documents for the tender submission. Ensure that the proposed solution fulfils the codes, regulations and safety requirements. Shall take responsible for the correctness of order in line with the offer to the customer. Coordinate with SL team to get correct drawings. Coordinate with SL for GAD, Order during post-order management. Coordinate with PM & FL sales during GAD Submission and Order to SL. Responsible for Releasing Manufacturing instruction (NRP) to SL as per process. Coordinate for documentation at the time of shipment with SL. Booking Order in SAP as per process. Keeping track of Order and Deliverables during post-order management. Follow-up with SL for the Deliverables like Drawings, Samples and Materials.

Prepare detailed 2D and 3D drawings and layouts for civil engineering projects using AutoCAD or similar CAD software. Responsibilities: Drawing Production: Prepare detailed 2D and 3D drawings, layouts, and models for civil engineering projects, including but not limited to: site plans, grading plans, utility layouts (water, sewer, storm drainage), road profiles and cross-sections, erosion and sediment control plans, and general civil details. Utilize AutoCAD, Civil 3D, MicroStation, or other similar CAD software effectively to produce high-quality, accurate, and constructible drawings. Develop and maintain drawing standards, layers, blocks, and templates to ensure consistency and efficiency across projects. Design Support: Assist civil engineers in the development of conceptual designs, preliminary designs, and final designs. Perform calculations and analyses as required to support design decisions (e.g., cut/fill volumes, pipe sizing, slope stability). Incorporate survey data, geotechnical reports, and other relevant information into designs. Revise drawings based on engineer markups, client feedback, and site conditions. Collaboration and Coordination: Collaborate closely with civil engineers, project managers, surveyors, and other disciplines (e.g., structural, architectural, MEP) to integrate civil designs with overall project requirements. Participate in design review meetings and provide technical input. Communicate effectively with team members to resolve design conflicts and ensure project alignment. Quality Assurance & Compliance: Ensure all drawings and designs comply with relevant industry standards, local codes, regulations (e.g., building codes, zoning ordinances, environmental regulations), and project specifications. Perform self-checks and quality control reviews of drawings to identify and correct errors or omissions. Maintain organized project files, drawing registers, and design documentation. Software Proficiency & Development: Stay updated with the latest versions of CAD software and design tools. Actively seek opportunities for continuous professional development in civil design and related technologies.

Electrical Shop drawing, Responsible for electrical Drafting related commercial & industrial projects, SLD & Schematic , Power distribution layout, Conduit & Point Wiring , Lighting Layout, Cable Tray, Raceway layout, As Built Drawing. Required Candidate profile Should Know Auto Cad, Excel, electrical drafting Should be able to understand BOQ. Should be technically sound. Visit at sites as per requirement

Auto level machine knowledge. Bar Bending Schedule(BBS) preparation Can check layout of structure on site. QA/QC of civil work. Site management Car driving still is must & have driving license Share your cv on 7290049005 or on hr@alwazo.com

Role & responsibilities Optimize and validate injection molding processes for new and existing parts. Conduct mold trials, establish and document process parameters using scientific molding principles. Troubleshoot molding issues such as flash, sink marks, short shots, warpage, etc. Collaborate with tooling and maintenance teams for mold modifications and improvements. Prepare and modify plant/facility/machine layouts using AutoCAD . Support capacity planning and layout updates for new machine installations and line setups. Maintain accurate process documentation: setup sheets, control plans, and work instructions. Conduct root cause analysis and implement corrective actions for process-related issues. Participate in PPAP, APQP, and FMEA activities in coordination with quality and NPD teams. Drive continuous improvement through Lean, 5S, and Six Sigma methodologies. Train shop floor teams on process adherence, safety, and quality. Preferred candidate profile Proficient in AutoCAD for layout design and modification. Strong understanding of injection molding machines, hot runner systems, and thermoplastic materials (PP, ABS, PC, Nylon, etc.). Hands-on experience with process validation and defect analysis tools (Ishikawa, 5 Whys, etc.). Familiar with IATF 16949, ISO 9001 standards. Excellent problem-solving, communication, and cross-functional coordination skills. Note: Candidates with a maximum 30-day notice period will be considered. Priority will be given to those available within 15 days.

Job Title : "Design Engineer Civil (Drafting Engineer)" Experience Required : Minimum 2- 3 Years re Qualification : Diploma in Civil Engineering or Degree in Civil Engineering Job Description: We are urgently seeking skilled and experienced Design Engineers with a Civil Engineering background to join our team for high-rise residential apartment projects. The ideal candidate will have hands-on experience in AutoCAD drafting, a solid understanding of civil engineering design principles and previous exposure to Maiwan technology. Key Responsibilities: Prepare detailed design drawings and layouts for high-rise residential structures using AutoCAD. Review structural plans to ensure accuracy and adherence to project specifications. Coordinate with architects, structural consultants, and site teams to gather design requirements and resolve technical issues. Ensure that all designs comply with industry standards, regulations, and company quality guidelines. Revise drawings and layouts to accommodate changes and enhancements as required. Maintain records of design documentation, revisions, and approvals. Support the project team in interpreting design drawings on-site during execution. Required Skills and Experience: Minimum 2-3 years of experience in civil design, specifically in high-rise apartment projects. Proficiency in AutoCAD drafting is mandatory. Strong understanding of civil structural concepts and design workflows. Prior working experience with Maiwan technology is highly desirable. Ability to read and interpret construction and engineering drawings. Good communication and coordination skills to work with internal and