339 Lab Jobs - Page 12

JOB DESCRIPTION Job Role: Lab Analyst Job Role ID: SECTION I: BASIC INFORMATION ABOUT THE JOB ROLE Job Role Variant: Lab Analyst Manager Job Position: Job Position ID: Value Stream: Asset Operations Job Family: Manufacturing Sub-Job Family: Trainee Grade/Level: Location: SECTION II: PURPOSE OF THE ROLE To assist with various laboratory activities ensuring quality, safety, and compliance of Refinery, Petrochemical, Polymer, Elastomer, Polyester, New Energy products through meticulous testing and management of laboratory operations under the guidance of experienced lab personnel while ensuring accurate analysis, testing, and quality control of various products SECTION III: KEY RESPONSIBILITIES AND ACCOUNTABILITIES OF THE ROLE Responsibilities Laboratory Operations Assist in the collection and preparation of samples from various stages of production process including proper labelling, documentation, and sample handling and ensure integrity of samples for analysis. Perform routine tests and experiments on samples using laboratory instruments and equipments including chromatography, spectroscopy, titration and other analytical methods Record and document test results, observations and experimental data in raw data book, process register and in individual raw data book. Update analysed result in LIMS and inform supervisor to review and validate LIMS results. Detect exceptions or deviations in test results and highlight / report to concern Assist in the calibration, validation and maintenance of laboratory equipment and instruments to ensure validity of test results. Dispose left over samples safely as per laboratory practices and procedures. Conduct inspection of received routine samples and distribution of samples as per type of analysis to the different sections of the laboratory. Proactively communicate to shift in charge for any abnormal samples or non-receipt of routine sample as per schedule. Workplace Safety, Audit & Compliance Adhere to laboratory safety protocols and guidelines at all times and ensure personnel as well the safety of assets Handle hazardous materials / chemical with outmost care and dispose as per the set guidelines/ protocols Keep self familiarized with the industry regulations, standards and protocols and ensure all lab activities comply with these requirements Policies, Processes and Procedures Conduct day to day activities in compliance with all relevant policies, processes, standard operating procedures (SOPs) and instructions so that work is carried out in a controlled and consistent manner. Keep self abreast with leading practices & trends in the industry and contribute in continuous improvement of systems, processes and procedures through LEAN six sigma methodology, DMAIC analysis, 5S adherence, QCC, Kaizen, etc. SECTION IV: SUCCESS METRICS (TOP 3-5 KPI's) Compliance to ISO 17025 Quality Management System Quality audit score Zero Penalty due to Non-Compliance of Health & Safety Regulations Reliability of reported results Awareness of LIMS and SAP-QM Awareness various standards and compliances (e.g. ISO 9001, ISO 18001, ISO 45001, AS9100D) SECTION V: OPERATING NETWORK Internal: Supervisor/ Manager, Lab Team, Quality Control/ Quality Assurance Team, Production Team, Research and Development Team, Health and Safety Team External: NA SECTION VI: KNOWLEDGE AND COMPETENCIES Education Qualifications Bachelors of Science (Chemistry) or Master of Science (Chemistry); M.Sc. Candidates will be preferred. Experience (Must Have & Good to Have) 0-2 years in QA/QC discipline Functional / Behavioral competencies required to execute the role FUNCTIONAL COMPETENCIES SECTION VII: CAREER MOVEMENTS Feeder Roles: Possible Next Role Movement: Lab Analyst

Minimum 5 years of experience in Medical Device Sales, corporate & enterprise hospitals, diagnostic centers, laboratories & clinics Hospital Partnerships: Identify and establish strategic partnerships with hospitals and healthcare institutions Required Candidate profile Clear understanding of B2B Healthcare Sales & BD Operations Knowledge of service delivery operations Responsible for promoting, selling software solutions to hospitals, clinics, diagnostic center

Role & responsibilities oHandle critical raw material without anyissues. o Handle hazardous solvent and dangerous chemicals with zero accident andsafely. Plant batch monitoring and data analysis forimprovement. Handle Autoclave to 28-30 kg pressure, ANFD Filtration, Distillation Reactor,scrubbe. To planning and carry out all production activities in shift as per productiontarget. Maintaining production and raw materialrecords. Handle H2So4, Solvents,Citric Acid,H2S Gas. Handle Scrubber System. HandlingCentrifuge ,GLR,SSR,Spray Dryer,FBD, Milling. Handle PLC System Handle Multi product ,BMR,LOGBOOK Interested candidate share resume at 9120534834/shahala.bano@teamlease.com Preferred candidate profile Perks and benefits

Vidyashilp School, Bagalur, is looking for a Lab Incharge (Science Background) with a salary range of 25,000 - 30,000 . If you are interested or know someone suitable for this role, please share your resume or reach out for further details.

Position: Lab Assistant Experience: Preferred 2 years (Freshers can also apply) Qualification: Minimum Intermediate (or equivalent) Responsibilities: Assist in lab tests and experiments. Maintain and clean lab equipment. Annual bonus

Role & responsibilities Report Validation Supervise Lab Administration Mmanaging Employees at LAB Reviewing slides & Validation of test reports of the Laboratory Ensuring Control on TAT, Consumption, Lab Expenses, OT and Inventory management Supervises day to day administration of the Laboratory Zero NCs in various Lab Audits like NABL, CAP, ISO9000 & Clinical Trials Maintaining the cost of operations within budget Ontime release of reports with 100% accuracy Employee Retention No Pre-Analytical Errors Smooth cross-functional coordination Preferred candidate profile Qualification: MD Pathology Experience: 0 5 Years Preferable prior experience in a NABL Lab

Role & responsibilities PURPOSE To provide lab support to customers in the Asia South Region. The primary accountability of the position is to execute trials for customer & internal projects and transfer to customer site, whenever required. KEY RESPONSIBILITIES 1. To understand and develop formulation as per the requirement of customers. To conduct trials and demonstrate the various applications of the product & to resolve technical queries of the Customers. 2. Support marketing efforts based on executed projects and service offerings in related areas primarily focused on EUDRAGIT & EUDRAGUARD based projects. 3. Interact closely with regional technical colleagues to understand and execute their project development requirement. 4. Documentation of lab trials 5. Execute and maintain all work safety in lab. Preferred candidate profile REQUIREMENTS Desired Candidates profile 1. Duration of employment – 1 year on Temporary basis 2. Qualification: M .Pharm in Pharmaceutics with 2 years of experience. 3. Area of Expertise: Experience in F&D and scale-up of oral drug delivery with experience in EUDRAGIT® based coatings. 4. Behavioural Attributes: Self-motivated and enthusiastic, Team Player, Intercultural mix, Good and clear communication, Open to new Ideas Perks and benefits :- Five days working, Transport and canteen facility Available.

Roles and Responsibilities Develop sales strategies to achieve revenue targets for assigned territory. Build strong relationships with customers, understand their needs, and provide solutions through effective communication. Identify new business opportunities and negotiate contracts with potential clients. Collaborate with internal teams (e.g., marketing, operations) to ensure seamless execution of sales plans. Conduct product demonstrations, trials, and training sessions to educate customers on our offerings. Desired Candidate Profile 1-5 years of experience in pharmaceutical or life sciences industry as a Sales Executive/Marketing Executive/Medical Representative. Freshers with interest in sales and zeal to learn can also apply Strong understanding of medical devices/pharmaceutical products/medical equipment/healthcare services; ability to communicate technical information effectively to non-technical audiences. Bachelor's degree in relevant field such as B.Pharma, M.Pharma, B.Sc/M. Sc in Physics or Bio/Lab from a recognized university. Email resume at adarshjbpsubrat@gmail.com

Roles and Responsibilities Collect blood samples from patients in a timely and efficient manner. Ensure proper labeling, handling, and transportation of collected samples to the laboratory. Maintain accurate records of patient information, test results, and sample collection details. Collaborate with healthcare professionals to resolve any issues related to sample collection or testing. Perform quality control checks on equipment and supplies used for phlebotomy procedures.

Job Field service engineer Location: Bangalore Experience: 1-2 years working experience on HPLC ( High performance Liquid Chromatography ) or GC (Gas chromatography) Either experience as an inhouse engineer or chemist / analyst in the lab

Hi... Doctors This is for job openings in the Corporate Chain of Labs, wants procedures-savvy MD/DCP doctors as histopathologists for the position of Chief of Lab in Fatehpur, Banda, Balia, Lucknow etc. Contact: 9819454343 Email: cv@sarajobs.com

Hey... This is for a job opening in a Corporate Chain of Labs, that wants Procedures-savvy MD/DCP doctors as Histopathologists for the position of Chief of Lab in Delhi & Patna, offering lucrative CTC. Contact: 9819454343 Email: cv@sarajobs.com

Dear Microbiologist, A Corporate Chain of Pathological Labs, wants procedures-savvy MD/DNB or PhD consultant for the position of Microbiologist Baroda(Gujarat), Shimla(HP),offering lucrative package. Call/WhatsApp: 9819454343 Email: cv@sarajobs.com

Job role: Screening for BP via Digital BP Monitor, Edema Score via Survey Link, Sugar Check with Strips & Machines in HCP Clinic, Around Chemists, Major Parks or hot spots where these residents go to & housing societies.

Job Area: Engineering Services Group, Engineering Services Group > Support Engineering General Summary: As a Support Engineer at Qualcomm, you will significantly contribute to our product improvement and work with other Engineers to sustain aspects of our product development life cycle. Support Engineers will also play a critical role in resolving technical system issues that promote product reliability. You will have endless opportunities to learn and grow in the Engineering development space. Minimum Qualifications: Bachelor's degree and 1+ year of Support Engineering or related work experience. OR Associate's degree and 2+ years of Support Engineering or related work experience. OR High School Diploma or equivalent and 3+ years of Support Engineering or related work experience. *Completed advanced degree in a relevant field may be substituted for up to one year (Masters = one year) of work experience. Preferred Qualifications: Bachelor's degree in Electrical Engineering, Electronic Engineering, or related field. Certification in Acoustics or Acoustics background with an understanding of related standardsHands-on experience with Audio Analyzers - Head Acoustics, Audio Precision, B&K etc.3+ years of experience in a lab environment, working on Anechoic/ Acoustic setups and calibration(microphones, speakers, calibrators etc.) Principal Duties and Responsibilities: Performs organizational or low-level development and process and/or product test support tasks. Executes modifications and revisions of electronic parts, software, system, components or circuitry with some supervision. Provides layout and design support for engineers and recommendations for midsized projects with some guidance. Installs, upgrades, configures, and helps operate company products and/or components based on specifications, tolerances and reliability. Monitors product performance and analyzes moderately complex failures or malfunctions. Gathers and integrates data and information from stakeholders to understand simple specifications and develop basic solutions. Collaborates with individuals inside own team and across other teams to complete project work while managing and executing individual project priorities, deadlines, and deliverables. Level of Responsibility: Works independently with minimal supervision. Decision-making affects direct area of work and/or work group. Requires verbal and written communication skills to convey complex information. May require basic negotiation, influence, tact, etc. Tasks require multiple steps which can be performed in various orders; some planning, problem-solving, and prioritization must occur to complete the tasks effectively. Applicants :Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies :Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers.

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. Preferred Qualifications: Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. 3+ years of Hardware Engineering or related work experience. 2+ years of experience with circuit design (e.g., digital, analog, RF). 2+ years of experience utilizing schematic capture and circuit simulation software. 2+ years of experience with hardware design and measurement instruments such as oscilloscopes, spectrum analyzers, RF tools, etc. About The Role : Experience:1 to 3 years The candidate should have good understanding of analog and mixed signal circuits with experience in high-speed links such as DDR PHY and/or Serdes Experience with high-speed digital circuits, memories and lab. testing is desirable Experience with Tx/Rx equalization techniques and circuits like de-emphasis, CTLE, DFE is desirable Knowledge of DDR protocols is desirable Knowledge and experience of digital verification is desirable Ability to work in a dynamic environment and interact well with cross-functional teams such as design, boards, ATE etc Applicants :Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies :Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers.

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 4+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. About The Role : Experience:8 to 12 years The candidate should have good understanding of analog and mixed signal circuits with experience in high-speed links such as DDR PHY and/or Serdes Experience with high-speed digital circuits, memories and lab. testing is desirable Experience with Tx/Rx equalization techniques and circuits like de-emphasis, CTLE, DFE is desirable Knowledge of DDR protocols is desirable Ability to work in a dynamic environment and interact well with cross-functional teams such as design, boards, ATE etc. Applicants :Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies :Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers.

Appropriate candidate is an expert organic chemist. Principal responsibility is oversight and execution of lab requirements of utilities, plant and R&D functions. Experience in leading and training and development of a lab team to ensure consistent and accurate results on an ongoing, daily basis is preferred. Experience in Naphthalene based chemistry preferred. Experience in unit processes such as sulfonation, high temperature alkali fusion, distillation, autoclave carboxylation, solvent based purification/ refining/ recovery preferred. Knowledge of a variety of analytical methods, TLC, HPLC and GC (either in-house or through identification and monitoring of reputable vendors) to monitor reaction processes and Interpretation of analytical results Oversight of Analytical Quality Testing and Reporting including daily testing for raw materials and finished products. Evaluation of raw material quality based on long-term assessment of relationship with finished product quality. Conduct extremely detailed literature searches for selected targets and goals, or to determine specific conditions for compounds and reactions. Keep abreast of current scientific literature and discuss new findings with colleagues. Identification of shortcomings in existing plant processes along with detailed root cause analysis, solution hypothesis conception and testing, solution finalization, feasibility and economic studies, assistance in solution implementation on commercial scale. Well versed with handling complex chemical reactions in lab, lab safety, handling of reagents, catalyst, hazardous chemicals, residues and process wastes.

Job Duties and Responsibilities: Planning as per the orders from vendors. Develops, trains and motivates team members to achieve desired safety, efficiency, proficiency, cooperation morale; maintains awareness of plant and/or implement new plant policies and procedures and ensures employee adherence/ may recommend and/or implement new plant policies and procedures. Reviews operational schedules, planning anodizing chemical lab activities, and manages team member assignments; may manage for multiple departments and/or shifts. Manages costs and budgets and provides corrective actions plans to improve- budgetary control. Reduction of losses during anodizing process. Performs other duties as assigned. Updating of chemicals as per the orders. Review the PM schedules and coordinate with maintenance department to get done the timely completion of PM. Maintaining the records of Hazardous waste generation & effluents generation. Follow the PCB norms in the ETP area. Should be able to delegate department workload effectively and monitor its progress towards completion. Maintaining the discipline and monitoring of the department allotted area as per 5S Methodology. Should be able to motivate and manage the team. Monitoring and controlling of all the safety gears. Weekly/monthly review with team members. Prepare WI/SOP to control the chemical bath requirements. Shall be responsible for GLP in chemical lab. Ensure daily operations of a laboratory. They are responsible for ensuring quality, safety, and efficiency Ensuring refreshed internal and external training to employees. Requisite Skills: Knowledge on chemical updation. Knowledge of Anodising process & strong trouble shooting skills. Demonstrating the ability to work with multiple internal departments to ensure on-time delivery of quality product. Desired Skills: Knowledge of statutory requirements related to chemical lab and Ano line. Strong interpersonal and communication skills to interact with and motivate a diverse group of employees. Advanced ability to solve chemical bath problems and deal with a variety of instrument/equipments and production problems.

Responsibilities Receive, label and analyze samples (blood, toxic, tissue etc.) Design and execute laboratory testing according standard procedures, make observations and interpret findings Conduct experiments under defined conditions to verify/reject various types of hypotheses using refined scientific methods Organize and store all chemicals substances, fluids and compressed gases according to safety instructions Record all data and results in specified forms (paper and electronic) with accuracy and responsibility Maintain equipment and assist in ordering laboratory supplies Ensure that all safety guidelines are followed strictly at all times and maintain a clean and orderly environment. Requirements Proven experience as Lab Technician or relevant position Experience in operating electrical and nonelectrical laboratory equipment and potentially dangerous substances (flammable liquids, infectious bacteria, biohazards etc.) In depth knowledge of QHSE Systems, preventative measures and laboratory best practices Excellent physical condition and endurance Working knowledge of MS Office (especially Excel) and database systems Ability to work autonomously and under pressure Valid laboratory technician license Degree in biology, chemistry or relevant field Immediate joiners only apply for the role. Interested candidates can share their profile on manohari.raghavan @indiraivf.in

Purpose of Position To monitor the plating chemical preparation, Chemical monitoring and maintenance, Chemical indent, conducting experiment etc. Ensure Plating chemistries are analysed, Monitored and controlled on regular basis in plating plant Specific Responsibilities Ensure that the Quality policy is understood, implemented, and practiced at all levels in the plating department. Establish and maintain documented procedures for the identification of chemicals at all stages in the plating department. Establish and maintain a documented procedure for process control in the plating department. Conduct a monthly review of trends in the plating chemicals and initiate corrective action for major deviations in the chemistry. Establish and maintain a documented procedure for handling, storage, preservation, and labeling of chemicals in the plating department. Maintain and control inventory of plating chemicals and safety equipment in the plating department. Ensure proper housekeeping and disposal of used chemical containers in the plant. Prepare a monthly statement of chemical consumption in-plant. Ensure Gold/Silver accountability norms are fixed and reported every month. Develop and maintain SOPs, WIs, and formats required for the lab. Participate in the goal-setting process for the department and strive for excellence. Maintain housekeeping standards and ensure safety measures. Specific Authorities: In charge of the Lab Authorized to analyze the plating baths and make chemical additions Authorized to update the Lab records Lab analytical chemicals ordering in Coupa Preparation and modification of the Lab and Chemicals storage & handling procedures (QMS/EHS) Authorized to operate ICP Lab and Chemical safety Draw chemicals from Main Chemical stores Gold addition to bath in the presence of Finance, WH, and Plating Manager or their representative Addition of Silver Potassium Cyanide. Skill Sets & Competencies Electroplating Process Knowledge : Understanding the fundamentals and practical aspects of electroplating. Chemistry Preparation : Skills in preparing and handling chemical solutions for plating. Process Parameters : Knowledge of factors influencing plating quality such as temperature, current density, and solution composition. Analytical Techniques : Proficiency in techniques including Atomic Absorption Spectroscopy (AAS), Inductively Coupled Plasma (ICP), pH measurement, turbidity measurement, conductivity measurement, Oxidation-Reduction Potential (ORP) measurement, wet analysis, and gravimetric analysis. Plating Experimentation : Experience with Hull Cell testing for evaluating plating quality. Troubleshooting : Ability to diagnose and resolve issues in the plating process. Plating Quality Requirements : Understanding quality standards and requirements for plating. Chemical Handling and Safety : Knowledge of proper handling, storage, and safety procedures for chemicals. 5S Housekeeping Technique : Familiarity with this technique for organizing and maintaining a clean workspace. SAP Exposure : Experience using SAP software for process management and reporting. Gold Accountability : Understanding of gold-related processes such as gold assay, variance, and stock reporting (advantageous). Performance Monitoring and Reporting : Skills in monitoring, controlling, and improving plating processes and chemicals. Process Validation and Revalidation : Experience with validating and revalidating electroplating processes. Basic Computer Skills : Proficiency in MS Office and other basic computer applications. QMS and System Requirements : Understanding of Quality Management Systems (QMS) and requirements specific to the plating area. IATF 16949 Compliance : Knowledge of and ability to execute requirements of the IATF 16949 standard for automotive quality management. EHS Compliance : Adherence to Environmental, Health, and Safety regulations

Greetings from Thyrocare! We are looking Consultant MD Pathology - (Locum) for our Amritsar, Mohali, Kochi Lab of *Thyrocare Technologies Ltd. Only sundays working,and on weekdays as and when required. If any one is interested kindly share your resume : tereza.nerson@thyrocare.com Or whatsaap : +91 83558 89455 Regards, Mrs.Tereza Nerson Contact No: 8355889455 Sr. HR | Talent Acquisition Thyrocare Technologies Ltd.

About The Role : Summary: Our Xeon Server Validation Team is seeking IO engineer for our validation teams in our quest to ensure no bugs escape to our customers. We are comprised of engineers from a variety of life experiences and perspectives who share this common goal and pursue excellence in doing so. We value our people first and foremost, so we appreciate a We Over Me mentality and a spirit of collaboration and encouragement. We have a robust server roadmap to deliver and therefore need your passion for leadership, problem-solving, and expertise. If you are seeking a validation challenge, are technically curious and enjoy developing creative solutions to complex problems, then come join us in delivering the highest quality server products to the world. In exchange, we offer you the opportunity to collaborate closely with the brightest minds in the industry, and to be a part of the work influencing the technology data revolution. You will enjoy all the growth opportunities available to you at a company as expansive and diversified as Intel. What You Will Do: You will be able to work in a variety of different validation disciplines in high-speed IO technologies. Your daily activities can include test content development, test automation developments to expedite execution with quality and efficiency, use of standard lab equipment for validation measurements and characterization, and interaction with cross-functional teams to provide health assessment resulting from validation execution. You will be responsible for, but not limited to: Defines, develops, and performs functional validation for CPUs, focusing on validation of the CPU internals and CPU integration in system level features for Intel performance and power efficient cores. Applies various hardware and software level tools and techniques to ensure validation coverage and that performance, power, and area goals are met. Reviews proposed design changes to assess impact on validation plans, tasks, and timelines. Develops CPU validation methodologies and test plans, executes validation plans, and collaborates with other engineers for design optimization, troubleshooting, and failure analysis. Applies knowledge of CPU core architecture, processor microarchitecture, and design. Performs silicon debug to identify root causes and resolves all functional and triage failures for CPU issues. Tests interactions between various CPU features using validation infrastructure. Develops post silicon validation infrastructure (e.g., performance monitors, behavioral checkers, state space coverage) and test environment used in validation testing. Publishes CPU validation reports summarizing all validation activities performed, reviews results, and communicates to relevant teams. Works with architecture, design, verification, board, platform, and manufacturing teams to maintain and improve debug, validation test strategy, methodologies, and processes for CPU interfaces and to meet desired product specifications. Develops content to create or increase specific IP interactions using a variety of tools and techniques (including patching techniques using microcode, firmware, or custom OS builds). Engages in all phases of the product life cycle, develops, and validates content and infrastructure, and bug hunts in multiple environments (simulation, emulation, FPGAs) to ensure silicon readiness. Behavioral Skills We're Looking For: A collaborative and helpful spirit. Creativity. Excellent verbal, written, and interpersonal skills. A growth mindset. Strong Collaboration and teaming skills. Growing and supporting highly motivated and experienced engineering teams. Networking, communication, and influence skills. Problem solver. Detail oriented. Excellent communicator, verbal and written. Highly collaborative, both within the teams and with the teams' stakeholders. Is willing to multitask and work in a dynamic and team-oriented environment. Qualifications Minimum Qualifications: BSEE or MSEE Graduate from an accredited University with 5+ years of experience. Strong desire for hands-on work in a hardware lab with computer systems and test stations. Knowledge of standard lab equipment like high-speed scopes and analyzers. Experience with mathematical and statistical analysis, including knowledge of JMP and/or Matlab. Knowledge of scripting languages such as Python, Perl, and Visual Basic. Role model with can do attitude. Inside this Business Group The Data Center & Artificial Intelligence Group (DCAI) is at the heart of Intel's transformation from a PC company to a company that runs the cloud and billions of smart, connected computing devices. The data center is the underpinning for every data-driven service, from artificial intelligence to 5G to high-performance computing, and DCG delivers the products and technologies"”spanning software, processors, storage, I/O, and networking solutions"”that fuel cloud, communications, enterprise, and government data centers around the world.

Maulana Abul Kalam Azad University of Technology, West Bengal looking forVisiting faculty-Multimedia The Visiting faculty-Multimedia is responsible for overseeing and managing key aspects of the role, including strategic planning, team coordination, and ensuring the achievement of objectives. Duties include analyzing workflows, optimizing processes, collaborating with cross-functional teams, and ensuring compliance with industry standards. Additionally, the role involves reporting on performance, identifying areas for improvement, and implementing innovative solutions to enhance efficiency and effectiveness.

Maulana Abul Kalam Azad University of Technology, West Bengal looking forVisiting faculty-Language Laboratory The Visiting faculty-Language Laboratory is responsible for overseeing and managing key aspects of the role, including strategic planning, team coordination, and ensuring the achievement of objectives. Duties include analyzing workflows, optimizing processes, collaborating with cross-functional teams, and ensuring compliance with industry standards. Additionally, the role involves reporting on performance, identifying areas for improvement, and implementing innovative solutions to enhance efficiency and effectiveness.