18 Kuka Jobs

Dip in Robotic Min 5+ yrs of expn any Foundry applications like Pick and Place / Trimming / Filing / Pouring Expn in Maintenance /Programming / Trouble shooting /Fanuc /ABB / Kuka / Nachi /Motoman / New and modify programs in robot / repair etc

Job description Robot Programming for Articulated Robot (like ABB, FANUC, YASKAWA, KUKA, KAWASAKI & NACHI), SCARA Robot like (Mitsubishi, Omron), COBOT and Robot vision system (like Fanuc, ABB & Cognex) etc. Required Experience: Exposure on Process of BIW / Handling / Assembly lines are preferred. 3 to 5 Years of Onsite experience in assembly line, handling lines and BIW Offline Programming. Experience as a Robot programmer from integrators, solution and service providing industries are preferred. Experience of Automation industries must. Required Knowledge: Exposure to onsite Robot Programming for Articulated Robot (like ABB, FANUC, YASKAWA, KUKA, KAWASAKI & NACHI), SCARA Robot like (Mitsubishi, Omron), COBOT and Robot vision system (like Fanuc, ABB & Cognex) etc. Onsite Robot, 3rd party devices configuration and programming experience is compulsory. Hands on Experience on Robot software and additional software configuration is compulsory. Knowledge of Industrial Networking and communications protocol like Modbus, TCP, Ethernet TCP / IP, Device Net, Profinet, Profibus, EtherCAT etc. Knowledge of third-party devices like OBARA, Yaskawa Weld Controller, Tip Dresser, Water Saver unit etc. Exposure on OEM Standards and requirements. Preferred OEM like (FORD / GM / VW / BMW / Stellantis / Daimler etc.) Knowledge of Handling Tool Validations, Generating Paths & also Configuration of EOAT s as per Applications etc. Event Based Simulation Knowledge, monitor the use of robotic systems and optimize their functionality to optimize the Cycle Time will be desired Prototypes and work on necessary components (e.g. Spot Welding, Hemming, Silent, MIG Welding, Material Handling/ Assembly) Knowledge on Layouts / Line Simulation, PLC, HMI, SCADA and Robotic simulation software and Vision system will be an added advantage. Kinematics for the Fixtures, Weld Guns and other EOAT s knowledge will be preferred. Onsite / Manufacturing / Shop floor experience is compulsory. Preparation & Completion of Process Documentation as per Standards. Key Responsibilities: Conduct in-detailed application study with customers to understand their automation needs and execute the right automation solution using Continuously review and analysis robotics trends to develop advanced robotics solutions for different application. Evaluate customer specifications, write efficient & logical programs for a variety of applications using robots. Program and demonstrate proof-of-concept (POC) for robotics solutions for clients. Take complete ownership of the projects and keep track of the application project blueprints, responsible for efficient project management. Execute the troubleshooting (mechanical & Electrical) for robotic application issues and maintain the documentation of troubleshooting procedures. Provide technical support (hardware & Software) to the customers to understand the problems/issues on the application and communicate same with internal stakeholder to provide best solution to end users. Conduct OJT (On the Job Training) for internal and external stakeholders and maintain the training records. Coordination with internal departments to ensure the project application is executed within TAT and positioned effectively. Study and develop industrywide Kinematics for the Fixtures, Weld Guns and other EOAT s BIW Product / Process Structure development. Must be able to suggest process changes. Provide complete Installation & Commissioning support in customer facilities for start-up, debug, training & final System acceptance. Perform integration tests and quality control to develop cost-effective and efficient processes for manufacturing. Preferred candidate profile Immediate joiner Perks and benefits

We are seeking a skilled and motivated Service Engineer / Senior Engineer with hands-on experience in robotics to join our dynamic team. The ideal candidate will be responsible for supporting installation, commissioning, programming, troubleshooting, and maintenance of robotic systems, while providing excellent technical support to customers and internal teams. Key Responsibilities: Lead and support new project installation and commissioning activities. Program and configure robotic systems to meet customer specifications. Provide on-site troubleshooting and telephonic technical support to customers. Deliver technical guidance and training sessions to service members, customers, and system integrators. Conduct routine robot servicing and preventive maintenance activities. Prepare and submit timely daily and weekly service reports to senior management. Develop and propose AMC (Annual Maintenance Contracts) and spare parts solutions to customers, contributing to business growth. Gather and communicate customer and system integrator feedback to management for continuous business improvement. Qualifications and Experience: Bachelors degree in Engineering (Mechanical, Electrical, Mechatronics, or related field) with a focus on robotics. 2 to 5 years of proven experience in robot service, application, programming, and project commissioning. Experience working with leading robot brands such as Yaskawa, Fanuc, Kuka, Torque Robotics, Skytech Robotics, or similar. Hands-on experience with Kawasaki robots is highly preferred. Strong troubleshooting and problem-solving skills. Ability to work flexible hours, including weekends and public holidays, as per company requirements. Skills and Attributes: Excellent communication and interpersonal skills. Customer-oriented approach with the ability to work independently and in a team. Strong technical aptitude with a passion for robotics technology. Ability to manage multiple priorities and deliver results under pressure. If you are passionate about robotics and eager to contribute to a growing company with cutting-edge technology, we encourage you to apply!

We are seeking a skilled and motivated Service Engineer / Senior Engineer with hands-on experience in robotics to join our dynamic team. The ideal candidate will be responsible for supporting installation, commissioning, programming, troubleshooting, and maintenance of robotic systems, while providing excellent technical support to customers and internal teams. Key Responsibilities: Lead and support new project installation and commissioning activities. Program and configure robotic systems to meet customer specifications. Provide on-site troubleshooting and telephonic technical support to customers. Deliver technical guidance and training sessions to service members, customers, and system integrators. Conduct routine robot servicing and preventive maintenance activities. Prepare and submit timely daily and weekly service reports to senior management. Develop and propose AMC (Annual Maintenance Contracts) and spare parts solutions to customers, contributing to business growth. Gather and communicate customer and system integrator feedback to management for continuous business improvement. Qualifications and Experience: Bachelors degree in Engineering (Mechanical, Electrical, Mechatronics, or related field) with a focus on robotics. 2 to 5 years of proven experience in robot service, application, programming, and project commissioning. Experience working with leading robot brands such as Yaskawa, Fanuc, Kuka, Torque Robotics, Skytech Robotics, or similar. Hands-on experience with Kawasaki robots is highly desirable. Strong troubleshooting and problem-solving skills. Ability to work flexible hours, including weekends and public holidays, as per company requirements. Skills and Attributes: Excellent communication and interpersonal skills. Customer-oriented approach with the ability to work independently and in a team. Strong technical aptitude with a passion for robotics technology. Ability to manage multiple priorities and deliver results under pressure. If you are passionate about robotics and eager to contribute to a growing company with cutting-edge technology, we encourage you to apply!

1. Onsite Robot programming on FANUC /KUKA/ABB Robots. 2. Experience on Spot welding, Sealer, Handling, Arc Welding applications. 3. Robot maintenance activities. 4. Understand the layout, Eplan, Function Plan and make logic for Robot prog. Required Candidate profile 1. Must know FANUC /KUKA /ABB / Kawasaki programming. 2. Experience in managing and training a team. 3. Collaborating with the Engineering and Production teams 4. Experience in Handling Project. Perks and benefits Allowances, performance bonus.

Qualification : Diploma in Electronics / Electrical, M.Sc Electronics , B.E Electronics / Electrical Experience : 7 to 16 years of experience in similar industry Familiarity of Control Panel components and their selection, Computer Savvy, Basic knowledge of software programming, Basic knowledge of a PLC. Execution of the Detailing Controls Activities correctly and accurately in the shortest possible time PLC, CNC, Robot, HMI programming Programming knowledge of Siemens, Mitsubishi, Rockwell PLC controllers. Programming knowledge of Siemens, Fanuc, Bosch CNC controllers Programming knowledge of Fanuc, ABB, Kuka, Comau and Mitsubishi Robots. Application knowledge of Material handling, assembly line, Machining Line Automation. Automation system testing and commissioning Material handling application knowledge Experience in automobile Industries Standard, material handling, SPM machines, etc. Controller safety programming Ready to work at abroad and local sites. Fluent in English speaking and writing Above at least any one controller (Siemens, Mitsubishi, Rockwell) programming knowledge is essential. Self checking the work for errors before presenting it for reviews Interested candidates are invited to share their resumes with the subject line " Application for Lead Member PLC Programmer" to pragati.d@wipropari.com Also send following details : Current Company Current Location Total Exp CCTC ECTC Notice Period Ready to travel PAN India / Abroad?

Role & responsibilities - Develop PLC and HMI programs; test and validate PLC and HMI software to ensure commissioning readiness. - Create visualization screens (e.g., Weintek, AutomationDirect). - Prepare both technical and non-technical documentation according to project deliverables. - Provide technical support to the commissioning team in North America. - Contribute to standardization and continuous improvement initiatives. - Travel to North America for short periods. - A non-traveling profile is also available. Preferred candidate profile Controls Engineer / Automation Engineer with below Must-Have Skills. In-depth knowledge of Rockwell PLC and HMI programming. Experience in commissioning automotive assembly processes like BIW weld cells or conveyor assembly lines. Good knowledge of the PLCrobot interface for various applications, such as spot welding, arc welding, dispensing, projection welding, and material handling. Additional skills required: Knowledge of VFD and Servo drives. Knowledge of Industrial networks preferably Ethernet I/P. Knowledge of Industrial safety standards and programming of safety PLCs and Safety relays. Knowledge of machine vision systems of Cognex, Keyence, Matrox, etc. Should be able to read electrical/mechanical drawings and layouts. Good knowledge of pneumatic valves and circuits. Knowledge of offline robot programming (Fanuc/KUKA) is an advantage. Basic Knowledge of programming skills such as XML, C#, J Script, VBA, Python, etc. is an advantage.

AM/ DM Assembly Maintenance - 8 to 12 Years for stamping industry at Pune. Position AM/ DM Assembly Maintenance Experience – 8 to 15 Years Location – Pune Education – BE/ Diploma Mechanical Please Note - Must have experience in stamping industry only. Job Description: Engineering degree – Mechanical with 8-10 years’ Experience. / Diploma – instrumentation with 10 to 12 years’ Experience preferably in Weld shop maintenance. Able to detect Allen Bradly PLC, Kuka, Robot, Lincoln welding machine and Fanuc welding Robot fault. Able to demonstrate understanding of how job performance affects product quality and customer satisfaction. Able to maintain confidentiality, and use discretion and tact. Able to manage and schedule multiple priorities and meet deadlines. Able to work flexible hours (Shift working). If interested, please share cv on omkar@hrworksindia.com Regards, Omkar 8208497043

Knowledge of PLC, CNC, Robot, HMI programming Siemens, Mitsubishi, Rockwell PLC controls. CNC control programming knowledge from Siemens, Fanuc, and Bosch Programming knowledge from Fanuc, ABB, Kuka, Comau, and Mitsubishi Robot.

Robot teaching and PLC programming Experience of any one Make Of Robot like Fanuc , Yaskawa , Kuka or Staubli. Deep knowledge in industrial automation and CNC machine tool industry, Deep PLC Experience of PLC Siemens , Mitsubishi , Schneider Required Candidate profile BE/ Diploma in Electronics/ Electrical Potential present industry/ Any company experience in the field of Machine Tools/ Machine Automation/ cutting tools/ fixtures. ready to travel customer location

Skills Required : Robotic Experience of any one Make Of Robot like Fanuc , Yaskawa , Kuka or Staubli Deep knowledge in Robot teaching and programming Deep PLC Experience on any one make of PLC Siemens , Mitsubishi , Schneider . Experience: 4 + Years Qualification: Any Electrical Background

Role & responsibilities Experience: 4 -10 Years Job Type: Full-time Job Summary: Seeking a highly skilled Tecnomatix Process Designer & Process Simulate Engineer to join our team. The ideal candidate will have 4 -10 years of experience in manufacturing process simulation, robotic programming, and digital manufacturing using Siemens Tecnomatix tools. The role involves designing, simulating, and optimizing manufacturing processes, assembly lines, and robotic workflows to improve production efficiency and quality. Key Responsibilities: Develop 3D process plans and assembly sequences using Process Designer. Perform manufacturing feasibility studies to validate product designs. Create and validate robotic simulations using Process Simulate for various applications, including material handling, welding, painting, and assembly. Define and optimize human ergonomics, tool paths, and workstations. Integrate PLC logic with simulations to test automation workflows. Work closely with production, design, and automation teams to ensure seamless process implementation. Support virtual commissioning and validation of robotic and automation processes. Troubleshoot and optimize simulation models to improve cycle time and efficiency. Generate detailed reports and documentation for process validation and improvements. Provide technical support and training on Tecnomatix tools to internal teams. Required Skills & Qualifications: 5-10 years of experience in Siemens Tecnomatix Process Designer & Process Simulate. Strong understanding of manufacturing processes, robotic automation, and assembly systems. Experience in robot programming and offline programming (OLP). Knowledge of industrial robots (ABB, FANUC, KUKA, Yaskawa, etc.) and their integration with Process Simulate. Familiarity with PLC logic and industrial automation concepts. Experience with virtual commissioning and simulation-based validation. Proficiency in CAD tools (NX, CATIA, SolidWorks, etc.) and PLM systems. Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Preferred Qualifications: Experience in automotive, aerospace, or heavy engineering industries. Exposure to Plant Simulation for factory layout and logistics optimization. Knowledge of VBScript, or C# for automation in Tecnomatix. Understanding of Industry 4.0, digital twins, and smart manufacturing.

Role & responsibilities Candidate should be well versed with third party devices integration to PLC as follows: PLC to Printer PLC to Marking & Laser Marking Machine PLC to Leak Testing Equipment Should have experience with Servo motors integration with PLC, working on Servo Drives Should have basic knowledge of Pneumatics & Hydraulics. Preferred candidate profile Candidate should be well versed with PLC to MIG Welding & Spot Welding Robot interface. Robot IO Mapping. Should have worked on various Robots such as Yaskawa, Panasonic, Kuka, Fanuc, ABB, OTC,Kawasaki etc. for their interfacing. Should have experience with Induction motors integration with PLC, working on VFDs.. VFD parameters setting. Perks and benefits

CCD–Vision system setup, troubleshooting Software Debug–Debugging automation software & ensuring seamless integration Robotics –Programming & maintaining robotic automation system Electrical–PLC, control systems, troubleshooting electrical automation

Qualification : Diploma in Electronics / Electrical, M.Sc Electronics , B.E Electronics / Electrical Experience : 8 to 14 years of experience in similar industry Familiarity of Control Panel components and their selection, Computer Savvy, Basic knowledge of software programming, Basic knowledge of a PLC. Execution of the Detailing Controls Activities correctly and accurately in the shortest possible time PLC, CNC, Robot, HMI programming Programming knowledge of Siemens, Mitsubishi, Rockwell PLC controllers. Programming knowledge of Siemens, Fanuc, Bosch CNC controllers Programming knowledge of Fanuc, ABB, Kuka, Comau and Mitsubishi Robots. Application knowledge of Material handling, assembly line, Machining Line Automation. Automation system testing and commissioning Material handling application knowledge Experience in automobile Industries Standard, material handling, SPM machines, etc. Controller safety programming Ready to work at abroad and local sites. Fluent in English speaking and writing Above at least any one controller (Siemens, Mitsubishi, Rockwell) programming knowledge is essential. Self checking the work for errors before presenting it for reviews Interested candidates are invited to share their resumes with the subject line " Application for Lead Member PLC Programmer" to pragati.d@wipropari.com Also send following details : Current Company Current Location Total Exp CCTC ECTC Notice Period Ready to travel PAN India / Abroad?

Hiring for Robotic Programmer in Reputed Industry Panasonic,Yaskawa,Kuka,Fanuc Robots Exp - 2 to 3 Years Qualification - Diploma/BE Mechanical Location - Chakan Pune Only for Male Candidates 8 hrs duty Call on - 8408824722/9518340393 Required Candidate profile Robot Teaching and programming on Panasonic & Yaskawa Mig & Spot Welding Able to handle of all kinds of Mig & spot welding defects.Analyze Rework /Rejection to take the counter measure to minimize i

Skills & Experience: Very proficient with Robotic programming and Path Teaching. Advanced programming in two of the following robots: Fanuc, ABB, Mitsubishi, or Kuka. Experience setting up various robot communication protocols (i.e. DeviceNet, Profibus, ProfiNet, Ethernet IP). Demonstrates a strong willingness to learn and acquire new skills, with a proactive approach to creating and executing proof of concept projects. Strong problem-solving skills Ability to evaluate robot simulations. Ability to read mechanical assembly drawings. 2+ years of related experience Proficient with Microsoft office products Added advantages: Hand on experience on 2D/3D integrated vision and Robotics Safety (i.e. DCS, SafeMove-Pro, SafeOperation etc.) Process simulates, Robo-Guide, RoboStudio, OfficeLite.

Job description Skills & Experience: Very proficient with Robotic programming and Path Teaching. Advanced programming in two of the following robots: Fanuc, ABB, Mitsubishi, or Kuka. Experience setting up various robot communication protocols (i.e. DeviceNet, Profibus, ProfiNet, Ethernet IP). Demonstrates a strong willingness to learn and acquire new skills, with a proactive approach to creating and executing proof of concept projects. Strong problem-solving skills Ability to evaluate robot simulations. Ability to read mechanical assembly drawings. 2+ years of related experience Proficient with Microsoft office products Added advantages: Hand on experience on 2D/3D integrated vision and Robotics Safety (i.e. DCS, SafeMove-Pro, SafeOperation etc.) Process simulates, Robo-Guide, RoboStudio, OfficeLite. Please go through the profile above, kindly forward your CV with subject line- Robot Programmer on sanyuktaat@Wipropari.com