7 Junction Boxes Jobs

JOB DESCRIPTION Job Summary 1)The Professional shall have experience and skills for execution of skid projects (Filtration/Heating/Pressure Reduction/Metering/Flow Control/Odorizing) including Project Engineering, Material Procurement, Project Execution and Quality Control & Assurance, demonstrating domain and capability to grant or exceed the Customer Expectation. 2)Responsibility on all aspects of skid order booking & timely skid execution without deviation. 3)Flexibility in travel within India / Middle East & Africa to Head Office/vendor locations/customer sites for Training, FAT, pre-commissioning & commissioning activities without deviation. In This Role, Your Responsibilities Will Be: Ensure compliance of EMERSON's Ethics code, (ex. Emerson Business Ethics, ITC etc.) & Divisions guidelines. Ensure compliance of EMERSON's Health, Safety and Environmental Standards. Frequent Travel within India/Middle East and Africa is essential as part of business need such training in Head Quarters - Dubai, Vendor locations for inspection/testing, customer site for pre-commissioning/commissioning activities. Work in close collaboration with Local and Headquarter Management and Teams, Factories, Suppliers and Customers, throughout the complete process of Skid Execution, Factory Acceptance Test (FAT) and CommissioningSupport. Responsible for preparation/consolidation of basic engineering documents (P&ID, Instruments Datasheets, Hook-up Drawings, wiring drawings, I/O list, Instrument list & required Interlocks, Cable Schedule & Interconnection Charts, hazardous Area classification drawings, load calculation, cable selection, Bill of material for procurement etc) Responsible for review of detail engineering of PLC / Flow Computer / RTU panel / SCADA including logics, Interlocks and configuration of the system. Responsible to develop the configuration, edit/modify vendor provided configurations as per customer change request during FAT/commissioning time. Lead the project individually and be immediate focal point to customer. Ensure compliance with Customer Technical and Quality requirements and liaise with Customer on all technical and commercial matters related to project Prepare and get approval of project schedule, identify project critical areas and achievements, from START to END, as per contractual scope, goals anworkes. Responsible for planning & preparation of RFQ and specification for sub-Suppliers, in compliance with project requirements. Review vendor quotations for technical & commercial compliance, approval and orders issuing. Responsible for proactively coordinate with engineering, sub-suppliers and customer teams Proactively work with Supplier, Integrator and Order Entry management for right quality & quantity of material on right time to meet committed production schedule. Prepare, complete and monitor committed project schedule. Closely work with suppliers, for timely delivery of Buyouts, ensure timely material availability at factory, and follow-up with skid assembler for accurate completion of work. Closely work with contractor's team identify roadblocks and potential crises. Proactively act and devise contingency plan, manage changes in the project scope and project schedule. Responsible for preparation & timely submission of weekly project progress report. Maintain Cost andensure that all potential Variations to Contract are identified and pursued in a fair and credible manner in the interests of the company and with necessary Purchase Order amendments Review vendor post-order documentations such as project schedule, drawings, sizing calculations, procedure Specification/Qualification, testing, calibration and FAT. Prepare Skid Technical Documentation, includingFAT/SAT Procedures, O&M, Functional Design Specification, documentation, including the Project Data-Book, etc Lead skid Integrated FAT testing and co-ordinate with customer and Third-Party Inspectors. Share knowledge, and experience with other members to establish standard methodologies in the design & project execution. Responsible for timely inspection and clearance of Suppliers Invoices. Closely work with Sub-Suppliers for closure of material issues. Measure and improve internal & external customer satisfaction. Record & maintain in process of non - conformance analyse for sub-supplier's corrective & preventive action. Maintain and promote a professional & harmonious relationship within EMERSON and with customer's representatives to maintain Emerson brand image and maintain or exceed Customer Expectation Ensure accurate submission of service report, on duty travelling expenses. Will be flexible and perform multi-tasking as per company's requirement time to time Timely escalation of the issues as per escalation matrix. Perform other duties and responsibilities as assigned by management and seniors. Updates the knowledge base (skill matrix) for the individual. Ensure 100% attendance to the trainings identified. Adhere and align with rules, regulation, processes and policies declared by management time to time. Who You Are: You have good attention to details and can set priorities and follow up on actions. You understand the project execution process and have a passion for learning and continuous improvement and collaboration. You quickly and significantly act in constantly evolving, unexpected situations. You actively seek guidance from relevant sources to learn and upskill yourself. You put customer first and are driven to ship a quality product For This Role, You Will Need: Bachelor Engineering Degree in Electronics & Instrumentation or Instrumentation & Control with 6-8 years of experience. Fluent in English Superior verbal and written communication skills. Exceptional interpersonal skills. Working Knowledge inMS Project & AUTOCAD, PLC, SCADA Knowledge of codes / standards such as IEC, NEC 500 and protection for electrical apparatus. Experience in preparation of E& I engineering deliverables, review of supplier engineering deliverables, testing and execution of skid packages in Oil & Gas industry. Experience in Specification and Selection of the products - Transmitters, Flow meters, Control valves, PLC, Automated valves, control panels, Junction Boxes, cables, RTU & SCADA for Oil & Gas system Preferred Qualifications That Set You Apart: 3 years of experience in E&I Design in skid packages 3 years of experience in project Execution in Oil & Gas. 1 Year of field experience in power plant or chemical plant or Oil & gas network companies. Our Culture & Commitment to You At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing competitive benefits plans, a variety of medical insurance plans, Employee Assistance Program, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.

We are looking a Fitter Job Location - Bellary, Karnataka Hands-on experience with Junction boxes, Instruments, and cable tray support installation. SS tube bending. Instruments installation and cable glanding. Ability to work at height on pipe racks for cable laying and supports installation. Role & responsibilities Interested candidate please share your cv given email id - recruitment15@aniintegrated.com

The opportunity: As a member of Hitachi Energy PQS Electrical Engineering (EE) team, you will be responsible for the full cycle project engineering execution. This includes designing MACH hardware control and Protection systems, IED based conventional control Protection systems, Configuration & testing of Protection systems, and Auxiliary AC & DC system design. Your innovative and reliable solutions will also involve MV/LV Switch boards, Battery systems, Junction boxes, and LV Cable sizing and estimation. How you'll make an impact: - Design & execute PQS projects in accordance with customer specifications, FACTS standards, and Global standards such as IEC, ANSI, IEEE, etc. - Ensure project execution within budget by meeting all KPI's (Quality, OTD, Efficiency, Budget) - Interact with customers, officials, contractors, and others, attend project meetings, and present specific aspects of engineering assignments and Tender execution as per customer/FACTS requirements - Prepare MACH-based control and protection system cubicle design, IED-based control and protection system cubicle design, and FACTS Plant design drawings (Secondary) - Design and estimate Aux. AC & DC power requirements, LV, MV Switch boards, including battery systems, UPS, and Voltage stabilizers - Estimate & Size LV Aux. power, control cables, communication cables & Indication cables - Coordinate purchasing of cubicles, cables, Junction boxes, AC & DC switch boards, MV Switchgear, Battery system, UPS & Voltage stabilizers, etc. - Collaborate with other departments (Mech. / Control / System Design/ Commissioning) to validate the project time schedule (EE Dept.) - Review and coordinate with vendor/supplier drawings for Electrical deliverables, including primary equipment - Provide Site and commissioning support as required, participate in development and supporting activities for continuous process improvements - Evaluate sub-suppliers and select as per project requirements, contribute to customer FAT according to project demand - Offer Site support and commissioning support as required, prepare As Built Drawings - Ensure compliance with applicable external and internal regulations, procedures, and guidelines while embodying Hitachi Energy's core values of safety and integrity Your Background: - 6 - 10 years of experience in Substation secondary/EPC design or project execution or HVDC control & protection hardware design - Self-starter with the ability to own tasks through to completion - Strong attention to detail - Excellent written and verbal communication skills - Valuable experience in Control and Protection cubicle design - Experience in secondary engineering and EPC execution experience in Electrical Grid Industry (Switchyard equipment) - Experience in Substation/FACTS Project experience or similar field experience in E3 design tool or Similar design tool handling - Experience in Cable engineering and knowledge & Experience MS Office: Word, Excel - Team contributor with in-depth knowledge in a specific area to execute complex or specialized projects / challenges, often thinking independently to challenge traditional solutions - Comprehensive knowledge of related disciplines in the organization, working independently, applying established local & global standards - Excellent English speaker with strong communication skills, proactive, willing to take on challenges and grow in the organization - Team player, ready to collaborate across different departments/countries, with a prominent level of ownership & accountability - Strong communication and interpersonal skills, with the ability to collaborate effectively with cross-functional teams - Attention to detail and commitment to delivering high-quality digital solutions Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site due to your disability. Please include your contact information and specific details about your required accommodation to support you during the job application process. This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.,

Responsible for Project E&I Engineering Design based on customer specifications, proposal BID in alignment with internal standards. Coordinate with Mechanical and Software functional teams for equalization of interrelated work. Flexibility to work according to priority and deadlines. Responsible for selection / sizing and ordering of all E&I items such as Flow Meters, Transmitters, Gauges, Panel, Junction Boxes, Panel Hardware. Shall drive the project with respect to quality and productivity. Provide direction and guidance to E&I Designer / E&I Engineer for preparation of drawings and documents. Customer specification evaluation, Project Documents and Drawings, Engineering Design, freeze of project basic design. Customer handling which includes customer KOM, Customer Queries, deviations to specs. Quality of the project documentation. Finalize P&ID, SBD, design basis, all panel drawings, all instruments data sheets. Correct PO to Vendor (PO review). Sub Vendor offer review and Sub Vendor drawings / documents review. Sub Vendor handling (follow up, design review meetings, escalations). Total E&I progress on project. Perform Pre-FAT and FAT with Customer. E&I Senior Engineer shall supervise the E&I work on the project, control it with respect to Quality, productivity and schedule. Guide the team on technical issues. Prioritize project deliverables, focus on ordering and resolving issues / concerns with Vendors. Proactive actions such as inspections / escalations to ensure quality of deliverables and timely completion of the project. Minimum Qualification Bachelors / Masters degree Instrumentation / Electronics Engineering with minimum 6 years of experience preferably with Oil and Gas Industry. Excellent Experience in different software for Meter Sizing and Meter Diagnostics. Excellent Communication skills (Verbal and Written). Able to effectively use MS Excel / Word. Able to work in Auto Cad. Experience in preparation of P&ID, SBD, BOM, signal wiring in panel and its all components. Prepare specifications for Junction Boxes, Cables, Field Instruments. Selection of Sour Service Instruments, Gas Chromatograph, Auto Grab Sampling System, Liquid and Gas Flow Meters. Sizing of flow meters. Preparation uncertainty and Heat and Power calculations. Good Knowledge of Hazardous area classification and its application in selection of correct instrument. Good understanding of API and AGA standards for metering. Planning of E&I activities for the project. Preferred Qualification: Bachelors / Masters degree in Instrumentation / Electronics Engineering. Able to Lead E&I team effectively. Flexibility to work to meet deadlines. Flexible to adapt the changes in project. Capable of working on multiple projects simultaneously. Attend FAT and handle customer during FAT. Good Problem-solving skill. Flexible to travel on site for SAT and Pre-Inspections.,

The senior instrumentation engineer position requires a candidate with a minimum of 6 years of experience as an electrical designer in sectors such as oil & gas, chemical plants, power plants, or renewable energy production. The candidate must be available for site surveys and possess a basic knowledge of the English language. Proficiency in software tools like Office and AutoCAD is essential for this role. Additionally, a good understanding of ATEX regulations is required. Key responsibilities of the senior instrumentation engineer include preparing cost estimates for engineering works at various stages, coordinating discipline activities to meet project requirements, ensuring compliance with safety standards, and approving project documentation. The candidate will also contribute to Hazard and Operability studies, risk assessments, and provide technical support to the procurement department. Drafting technical specifications for control systems and other related components is a critical part of the role. On the other hand, the junior instrumentation engineer should be capable of working independently or under supervision to create technical specifications for field and control room instrumentation, process hook-up sketches, interconnecting diagrams, and instrumentation cabling. The role also involves working on cause & effect matrices, interlock and control logic diagrams, and Distributed Control Systems (DCS) among others. Both positions are full-time roles with benefits such as Provident Fund. The work schedule is day shift from Monday to Friday, and the work location is in person.,

As a Senior Instrumentation Engineer, you should possess a minimum of 6 years of experience as an electrical designer in sectors such as oil & gas, chemical plants, power plants, or renewable energy production. Your responsibilities will include preparing cost estimates for engineering works at various stages, coordinating discipline activities to ensure compliance with project requirements, conducting Hazard and Operability studies, providing technical support to the procurement department, and drafting technical specifications for control systems and field instruments. Proficiency in software tools like Office and AutoCAD, as well as a good understanding of ATEX regulations, is essential. Additionally, you must be available for site surveys and have a basic knowledge of the English language. For a Junior Instrumentation Engineer role, you will be expected to work independently or under the guidance of a more experienced professional. Your tasks may involve creating technical specifications for field and control room instrumentation, developing process hook-up sketches, preparing interconnecting and wiring diagrams, working on instrumentation cabling and networking systems, and designing control and instrumentation on Piping and Instrumentation Diagrams (P&IDs). Familiarity with systems such as Distributed Control Systems (DCS), Safety Instrumented Systems (SIS), fire and gas detection systems, and machinery controls is desirable. This is a full-time position with day shift working hours from Monday to Friday. The work location is on-site, and the benefits include Provident Fund.,

Role & responsibilities Years of Experience 12-15 Years in O&G, Chemical/Petrochemical domain Skills • Experienced Designer with knowledge of design stages and Design Deliverables of I&C discipline • Experience and knowledge of I&C Design and 3D modelling using SP3D for Cable trays, Conduits, Instrument Equipment, Junction Boxes, Remote IO Panels, Local Panels, Analyser shelters, Multi Cable transits (MCTs) etc. • Experienced with Model reviews, participation in model reviews. Should be able to complete all I&C Design related activity independently in compliance to applicable codes and standards. • Should be experienced with other Design related software like AutoCAD, MicroStation, SPR, NAVIS Works and Microsoft Office • Knowledge of preparation and review of Detailed Engineering Design Deliverables (Instrument Hook-up, Loop Diagram, Tray and conduit layout, Trench layout, Location Plan, Conduit wiring drawings and conduit modelling, Junction box and Panel wiring Diagram, Functional Loop Schematics, Tray, Cable and Tubing Material BOM/BOQ, Cable Schedule etc. • Should be able to prepare and review all I&C design deliverables independently in compliance with Quality System • Familiarity with relevant codes and standards applicable to O&G / Chemical plants • Experience of Participation in Model Review and Squad Check process • Knowledge of instrument installation practices and standard, construction sequence and requirements, access and egress related requirements • Should have knowledge of wiring schemes for ESD/DCS and RTU/SCADA applicable to O&G / Chemical plants • Understanding of Low Voltage Electrical Systems, Gas detection system etc. cable separation requirement is desirable. • Ability to work in a team and support the project deliverables as per schedule and collaborate with other disciplines for requisite inputs is desirable. • Good verbal and written communication skills • Experience of working on international projects and client is preferred. • Experienced with performing IDC of interdisciplinary checks of I&C deliverables and other discipline drawings. • Experience of Green and Brown field projects