125 Jigs Jobs - Page 3

To ensure site operating smoothly Key Responsibilities Maintain, repair, adjust, and replace the entire plumbing system, including waste-vent-water piping, valves, and the various fixtures and equipment served by this system Perform visual inspections for the detection of abnormal operation and correction of deficiencies Receive work orders and coordinate work to fit schedule as assigned by Supervisor/Manager Estimate time and materials required on work order Maintain work area and equipment in a clean and orderly condition following prescribed safety regulations Respond to calls from facility departments requesting immediate assistance for plumbing problems Respond to emergency call-in situations Cooperate with members of the department and facility on all emergency conditions regarding internal customers, visitors and staff Perform preventive maintenance on related equipment assigned by the Supervisor Have necessary stock and tools in order to maintain, repair or replace malfunctioning equipment Coordinate with other departmental employees on diversified work projects Make daily rounds of building and related equipment as assigned by Supervisor Know current safety regulations Attend all scheduled staff training and safety meetings Key Competencies: ITI Certificate Ability to read blueprints and specifications Good communication skills Ability to troubleshoot related systems

Able to read and work with tool drawings Must have good knowledge about press tools Tryout of tools Machining process Press machine Having knowledge about GD&T Press tool trouble shooting Experience in new tool manufacturing

Understand and evaluate electrical panels, PLCs, HMIs, SCADA systems, and their integration. Study and assess mechanical jigs, fixtures, and tools used in production/assembly lines.

Responsibilities: Profile required :Others (e.g. Attitude and Behavioral skills): Developing a schedule for the project with clear Action Plans as per the requirement. Ensure supply chain set up in the system. Ensure manufacturing readiness of all departments. Planning & conducting Pilot reviews / Pilots / Post Pilot reviews & initial build. Handing over the product to Plant management after initial build. Responsible of product quality and cost, industrial planning and capital expenditure (investments, expenses and engineering cost) from concept to mass production release Build industrial scenarios according to SE industrial strategy and select the most efficient. Estimates cost, capex, ROI and risk Define the best manufacturing process and technology to be used for components fabrication, assembly process and control Optimise supply chain process and purchases Assess and select suppliers and manufacturing location from both internal and external sources Leads industrial projects for productivity achievement for the plants For OCP projects, work closely with design & engineering, marketing departments to ensure the best manufacturability of a product Optimise product cost, quality and ROI by proposing solution to rationalize or to optimise commercial offer (number or references) Coordinates all industrial functions (tools, electronic, assembly, advanced quality and cost) and purchasing Leads and coordinates industrialization resources, internal and external manufacturing plants as well as international resources, suppliers and subcontractors Take a lead on Strategic projects and submit the feasibility study to management and execute the same based on management approval Strong experience in project management in related industries. PMP certificate may be an added advantage Experience of managing team of cross functional leaders in project management Good knowledge of many industrialization field (assembly, tooling, manufacturing process, advanced quality, value analysis, lean manufacturing) Good understanding of manufacturing processes. Exposure to mass production process is desirable. Must have knowledge of Jigs & Fixtures. Good knowledge in Purchasing and Finance functions Experience in quality management system 6 sigma knowledge may be an added advantage People management skills Exposure to various experiences (different companies, different positions, international experience) are very much appreciated Very good team player. Very open minded, creative Able to foresee problems & raise alarm to management in case schedule is getting extended. Able to articulate the problems across to team members. Tactful, diplomatic Self-motivated, Very dynamic, team leader Result oriented, effective and efficient Can withstand stress and high work load Able to collaborate as well as to influence Very analytic and able to take decisions

Role & responsibilities 1. Process design, Tool Design , Review of 2D drawing & 3D CAD Model 2. Review of Process simulation & report 3. Project leader for new product development 4. Guiding the team for Tool trials, samples preparation, Countermeasure/action plan for process capability 5. Review APQP Documentation for Process design, ( Risk analysis/assessment, PFMEA, TGW/TGR, PPAP etc) 6. Meeting with customer (visit/ tele-con), Warranty meeting 7. Process VA ideas & Design Innovation 8. Design of Gauges & testing Fixtures 9. Monitoring the Preparation of Stage inspection, work instructions, die handover instructions, die maintenance instructions, Release of Charts 10. Ensuring Support to Production/QA/Tool Room for process trouble shooting 11. Experience in GD&T Preferred candidate profile Post Diploma in Tool design & manufacturing Experience of leading team in an automotive environment, Hands-on engineering and possess knowledge of sheet metal production processes & equipments (mechanical/hydraulic press etc.), working knowledge of 2D and 3D CAD, knowledge and experience of PFMEA, APQP, PPAP, SPC, six-sigma, good communication skills Interested candidates can reach me out at bharti@symbiosisindia.net

Responsible for automation system designing from initial concept to final detail design including 2D & 3D Responsible for SPM/New Product designing/Grippers/Conveyors etc. design from concept to final detailed design including 2D & 3D Mandatory:- Mechanical design Solid works and auto cad Robotic cell Automation Jig and fixture Robotic simulation

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview TE Connectivity's Manufacturing and Process Development Engineering Teams significantly impact LEANPD driven new product development projects, driving for excellence in existing manufacturing technologies and methods and striving to implement new manufacturing technologies to provide improved process and tolerance control. They act as the binding element between product development and manufacturing engineering, ensuring the effectiveness and efficiency of this critical interface. They support Product Development in the optimization of designs and piece parts for manufacturability by realizing sample tooling/products/prototypes. They also design, develop, and qualify tooling and processes to meet TE quality and production standards, document all processes and tooling in applicable TE systems, support supply chain to verify supplier compliance and capability, initiate and implement programs to continuously improve quality, cost and cycle time and adhere to all appropriate specifications, regulatory requirements and customer requirements. Responsibilities Complete prototype building and product testing in association with R&D Engineers. Complete process development to support new product development and implement manufacturing lines with the project teams. Conceptualize, source debug, and introduce new/improved Jig and Fixture designs. Preparation of Manufacturing Procedures & training of product builder personnel. Prepare and maintain Preventative Maintenance Schedules. Troubleshoot and repair line defective equipment. Ownership of line yield and output. Provide weekly updates and highlight yield issues and implement fixes to the team. Provide technical leadership and have the ability to motivate and influence production personnel. Display customer focus at all times and be accountable for quality and timeliness of own work. Compile IQ / OQ protocols and execution of same. Assist team in performing design testing. Fixture Maintenance /Calibration ownership for respective equipment. Basic understanding of QMS system. What your background should look like: Diploma in Mechanical /Production 2+ years experience in a similar role. Knowledge of Medical Device development/manufacture with previous work experience in Design an advantage. Jigs & Fixtures design and fabrication experience preferable. Experienced with all the popular software applications for generating office documents, spreadsheets, project plans, etc. Experience in execution of lab testing an advantagee.g. tensile testing, torque testing etc. Experienced in IQ/OQ/PPQ documentation preparation, execution. AutoCAD/Solid works experience preferable. Knowledge of Six-Sigma and Lean Engineering principles an advantage. Knowledge of equipment, process and product validation processes, ability with statistical data analysis. Dynamic, flexible approach to work with a results-oriented attitude. Comfortable operating within a team environment. Motivated to work on own initiative. Good communication and organisational skills. Proven track record of excellent timekeeping & attendance is essential. Basic Understanding of QMS Competencies

Hello Visionary! We empower our people to stay resilient and relevant in a constantly changing world. Were looking for people who are always searching for creative ways to grow and learn. People who want to make a real impact, now and in the future. Does that sound like youThen it seems like youd make an outstanding addition to our vibrant team. Siemens Mobility is an independent run company of Siemens AG. Its core business includes rail vehicles, rail automation and electrification solutions, turnkey systems, intelligent road traffic technology and related services. In Mobility, we help our customers meet the need for hard-working mobility solutions. Were making the lives of people who travel easier and more enjoyable while constantly developing new, intelligent mobility solutions! We are looking for Process Planning & Industrial Engineer- Electrical Youll make a difference by Develop a sustainable strategy and business plan. Plan sales volumes for potential customers. Infrastructure & Utilities monitoring and control Technical Specifications writing for the M&Ps Planning for Cables Harness Manufacturing Documents preparation for the on-going Build Production support and associated KPIs, RFCs Issues & PPTs reporting to varied Stakeholders Plan & execute actions of WAM measures to achieve productivity targets year on year. Ensure Layouts are in line with electrical safety standards & all required measures are implemented. Training, Qualifying & validating special process / people for special processes such as Crimping. Plan & execute test Philosophy, Test jigs & fixture for wire harness testing during manufacturing. Desired Skills: We are seeking for a BE-Electrical/Power Electronics. Minimum 5 Years of relevant experience. Min. 5 years of experience process planning of wire harness & other electrical HV, MV cabinets. Experience of working in Rolling stocks components / Locomotive is preferred. Join us and be yourself! Make your mark in our exciting world at Siemens. This role is based in Gurgaon (Posted LocationDahod). You might be required to visit other locations within India and outside. In return, you'll get the chance to work with teams impacting - and the shape of things to come. Find out more about mobility athttps://new.siemens.com/global/en/products/mobility.html and about Siemens careers at

• Should have knowledge in Basic Engineering • Understanding Mechanical Drawing, Operating Tools and Jigs /fixtures • Being able to work with a team. • Having high attention to details. • Having awareness of safety and health issues

Manufacturing engineering for current products: (variant) Prepare and keep cellwise and product wise line capacity sheets updated and get it reviewed by Plant Lead Current products for adequacy Keep latest shop floor layout ready with due approvals Execute debottlenecking projects as given by HOD Achieve Quality Improvements by doing defect analysis with QA and take actions on root cause by providing Preventive & Detective countermeasures. Fill PCRN, get it approved and implement Do process capability & Process qualification studies as and when required Productivity Improvement by Implement low cost automation solution, layout improvements to save manpower Update process document like PFC, PFMEA, Control Plan and IPO as and when required Continuous improvement through Industrial Engineering effort: Study production process at granular level and do time study using MOST methodology for new products as well as current products as and when requested Analyze opportunities and flow for improvement of workstation ergonomics and implement necessary actions Jigs, Fixtures, Tools & Gauges Design and documentation: (variant) Prepare concept design of Jigs, Fixtures & Process Gauges for New Product Development which is to be approved by Design Lead after design review with requester Design & release final tool drawing after approval from manager Ensure proper storage & retrieval of latest drawings Modify existing tools to achieve improvement in quality, reduction in set-up time &cost as per from process engineer by using pokayoke & SMED concepts Arrange new machine, Jigs & Fixtures as per given projects by HOD, follow model specifications for the same; RFQ to supplier, comparison of quotes and preparing technical recommendations etc., fill PR Do midterm inspection of new machine, Jigs & Fixture, get them installed by maintenance, do trials and handover to production

Role Purpose The purpose of this role is to support delivery through development and deployment of tools. Do 1. Provide tool design, development and deployment support for the project delivery a. Interact with the internal project or client to understand the project requirement from a tool perspective b. Design the solution keeping in mind the tool requirements, current tools available as well as details on licenses required etc. c. Provide budget and timeline estimates for the tool development/ deployment as required d. For any new tool development, identify sources for development (internal or 3rd party) and work with the project managers on the development of the tool keeping in mind the production rollout timelines e. Conduct commercial discussions with the 3rd party vendors for licenses or tool development f. Conduct appropriate testing to ensure error free deployment of the tool on the project g. Ensure deployment of tool on time and within the estimated budget Deliver No. Performance Parameter Measure 1. Tool Development and deployment Quality of solution Timely development and within budget Timely deployment of tool Error free deployment

Role Purpose The purpose of this role is to support delivery through development and deployment of tools. Do 1. Provide tool design, development and deployment support for the project delivery a. Interact with the internal project or client to understand the project requirement from a tool perspective b. Design the solution keeping in mind the tool requirements, current tools available as well as details on licenses required etc. c. Provide budget and timeline estimates for the tool development/ deployment as required d. For any new tool development, identify sources for development (internal or 3rd party) and work with the project managers on the development of the tool keeping in mind the production rollout timelines e. Conduct commercial discussions with the 3rd party vendors for licenses or tool development f. Conduct appropriate testing to ensure error free deployment of the tool on the project g. Ensure deployment of tool on time and within the estimated budget Deliver No. Performance Parameter Measure 1. Tool Development and deployment Quality of solution Timely development and within budget Timely deployment of tool Error free deployment

Role Purpose The purpose of this role is to support delivery through development and deployment of tools. Do 1. Provide tool design, development and deployment support for the project delivery a. Interact with the internal project or client to understand the project requirement from a tool perspective b. Design the solution keeping in mind the tool requirements, current tools available as well as details on licenses required etc. c. Provide budget and timeline estimates for the tool development/ deployment as required d. For any new tool development, identify sources for development (internal or 3rd party) and work with the project managers on the development of the tool keeping in mind the production rollout timelines e. Conduct commercial discussions with the 3rd party vendors for licenses or tool development f. Conduct appropriate testing to ensure error free deployment of the tool on the project g. Ensure deployment of tool on time and within the estimated budget Deliver No. Performance Parameter Measure 1. Tool Development and deployment Quality of solution Timely development and within budget Timely deployment of tool Error free deployment Mandatory Skills: Splunk AIOPS. Experience5-8 Years.

Repair and maintain press tools and die repairs. Attend break down, identify fault and problem solve at the press with minimal down time to aid production. Responsible for the repair, Maintenance and improvement to all press tools, Jigs, Fixtures.

Exp of production Supervisor with Hand on experience of CNC/VMC/HMC programming, set up on various machines, must have knowledge planning of process , tools, jig, fixture, Knowledge about cycle time reduction , line balancing , PPAP documentation Required Candidate profile candidate require for 3 shifts Candidate must have 5 to 7 yrs exp. knowledge in planning of process, tools, jig, fixture, Knowledge about cycle time reduction, line balancing , PPAP documentation

Job Position - Sr. Engineer\u2013 Production Job Location -Sikkim Watches and Wearables Level - L3/L4 Reporting to- Assembly production Head 1.PRINCIPAL RESPONSIBILITIES: \u00B7Supervising day-to-day production activity to meet weekly and monthly targets. \u00B7Identify critical operations at casing which may lead to cumulative defects in quality and provide necessary technical support, training etc., to ensure the production happens with quality desired. \u00B7Ensure the plan reinforces the loading of the lines based on resources and the capabilities addressed by the lines in-order to increase PCO \u00B7Initiative productive improvement \u00B7Analyzing quality issues with responsible agencies and taking CAPA \u00B7Tool and manpower allocation to production lines to achieve daily targets \u00B7Manpower Training and skill development \u00B7Ensuring jigs and tooling requirement \u00B7Monitor the usage of consumables and ensure the usage is appropriate \u00B7Capacity utilization through effective load balancing \u00B7Order lead time monitoring and ensuring closure of orders \u00B7Initiate internal training on production SOP\u2019s and practices to be followed for 5S, safety and basic maintenance of machines \u00B7Documentation of day-to-day production data. 2. Job Profile \u00B7To enable assembly production of casingand ensure the a production targets are achieved as planned alignment as scheduled. \u00B7Focus on improving productivity \u2013 PCO, ensure capacity utilization and build the skills and processes required for handling complexities for future requirements of the plant. 3. Key Deliverables \u00B7Production targets \u2013 achieve 100% and above. \u00B7PCO \u2013 Improvement. \u00B7OLT \u2013 Order lead time reduction. \u00B7Capacity utilization of the shop floor \u2013 maximum load balancing [nil idling] \u00B7Quality \u2013 FTA & yield \u2013 consistent for all category of product. \u00B7COQ \u2013 reduction on process rejection for all the premium models \u00B7Cost of consumables \u2013 reduction \u00B7Process certainty for productivity and quality \u00B7MIS reports in real-time with accuracy Work Experience Be-tech in Mechanical Engineering with Experience- two to three years or Diploma in Mechanical Engineering with Experience- Fourto fiveyears Knowledge of Qc toot. Six-sigma, RCA - Analytical Problem solving & technically sound Production and process planning Good Manpower handling skills, Teamwork & Team building Good verbal and written communication Expert in Report making \u2013 Word, Excel, andPower point

Person at this position has gained significant work experience to be able to apply their knowledge effectively and deliver results. Person at this position is also able to demonstrate the ability to analyse and interpret complex problems and improve change or adapt existing methods to solve the problem. Person at this position regularly interacts with interfacing groups / customer on technical issue clarification and resolves the issues. Also participates actively in important project/ work related activities and contributes towards identifying important issues and risks. Reaches out for guidance and advice to ensure high quality of deliverables. Person at this position consistently seek opportunities to enhance their existing skills, acquire more complex skills and work towards enhancing their proficiency level in their field of specialisation. Works under limited supervision of Team Lead/ Project Manager. Roles & Responsibilities Responsible for design, coding, testing, bug fixing, documentation and technical support in the assigned area. Responsible for on time delivery while adhering to quality and productivity goals. Responsible for adhering to guidelines and checklists for all deliverable reviews, sending status report to team lead and following relevant organizational processes. Responsible for customer collaboration and interactions and support to customer queries. Expected to enhance technical capabilities by attending trainings, self-study and periodic technical assessments. Expected to participate in technical initiatives related to project and organization and deliver training as per plan and quality. Education and Experience Required Engineering graduate, MCA, etc Experience: 2-5 years Competencies Description Application Protocol & Engines - Linux engineer is one: who has done one or more of the following on Embedded Linux design, development/customization, bug fixing/sustenance who has experience in one or more of the following domains Multimedia Telephony Connectivity Sensor Security Platforms- Mandatory to have worked on one or more of the following: Embedded Linux Technology Standard- NA Tools- Mandatory to have worked on one or more of the following; gdb/ddd; linux editors; top; ps; meminfo Languages- Mandatory to have worked on one or more of the following; C; C++ Specialization- MULTIMEDIA, CONNECTIVITY, TELEPHONY, CARRIER GRADE PLATFORM, GENERIC FRAMEWORK

Align NPI strategy, lead decisions, manage docs (PFMEA, WI), support design reviews, drive Lean, resolve yield issues, lead DFM/DFA, develop processes, ensure IATF 16949 compliance, coordinate suppliers, execute pilot builds, track milestones.

Tool Maintenance Engineer (Injection Moulding) - Oragadam Location Exp: 5+ yrs Ind: Plastic Injection Moulding Skill: Mould Maintenance, Lathe Machine Immediate joiner is Preferable Id - lifeturnmgmt6@gmail.com / what's app 7358656750

Knowledge of conv Machining lathe, Milling, Grinder ,EDM, Mold Maintenance, Jig Fixture, Breakdown Analysis. Knowledge of Drawing.

Exp.of NPD of sheet metal components with knowledge of Fabrication end to end npd process from RFQ, feasibility study, sample development, tools, jigs and fixtures development till pilot lot into production Required Candidate profile New Tool & Gauges Design & Development, Tool Modification, Jig/Fixture Design, CNC&VMC Programming.

Job Description: Trade Trainer for Tool and Die Maker The Tool & Die Training Specialist is responsible for designing, developing, and delivering comprehensive training programs related to tool and die making, press operations, and related manufacturing processes. This role focuses on enhancing the skills and knowledge of trainees, apprentices, and employees to meet the organization's manufacturing standards and requirements. The specialist will utilize their extensive hands-on experience in tool and die making, along with their expertise in conventional and CNC machining, to create effective training aids and deliver impactful training sessions. Responsibilities: Training Program Development: Derive and define the necessary skills and knowledge required to develop training aids and content related to Tool & Die making trade. Develop comprehensive training aids, including practical exercises, demonstrations, and theoretical materials, for skill and knowledge building in tool and die making, press operations, and related areas. Training Delivery and Scheduling: Schedule and deliver training programs to achieve expected learning outcomes in press operations, tool and die making, and related manufacturing processes. Conduct hands-on training sessions utilizing conventional and CNC machines, ensuring practical application of theoretical concepts. Provide effective instruction on die repair, proving, and sheet metal operations. Apprenticeship Program Management: Execute the Apprenticeship training program related to the Tool Maker trade at the Skill Development Center (SDC). Monitor and evaluate On the Job training at the plant, ensuring adherence to training standards and objectives. Conducting their theory and practical exams of trainees as per schedule. Maintaining progress records of trainees. Infrastructure and Maintenance: Ensure the upkeep and maintenance of all training infrastructure, including machines, tools, and training materials, to support qualitative and quantitative training delivery. Maintain a safe and organized training workshop environment, adhering to 5S principles and safety standards. Promote and enforce safety standards and practices within the training workshop. Ensure compliance with all relevant safety regulations and guidelines. Technical Expertise: Provide hands-on expertise in tool and die making operations and activities. Must be having knowledge of basic workshop activities like filing, number punching, drilling, and hammering. Use of all tools and equipment required for mentioned activities. Demonstrate proficiency in press operation, die repair, and proving. Operate conventional machines (milling, turning, grinding) and CNC machines with precision. Apply knowledge of Geometric Dimensioning and Tolerance (GD&T) in training and practical applications. Demonstrate knowledge of manufacturing processes like additive, and casting. Having knowledge of design software like Auto cad, Catia, Qualifications: Education and experience: Diploma in Mechanical Engineering with 5 to 6 years of work experience in Tool Making, Jigs & Fixture assembly & maintenance. Proven hands-on experience in tool and die making operations. Extensive experience in press operation, die repair, and proving. Hands-on experience with conventional machines (milling, turning, grinding) and CNC machining. Experience in sheet metal operations.

Quality Manager (Location: Podalakur, Nellore, AP) You are expected to actively manage our entire Quality team at our factory in Podalakur Mandal, Nellore District, Andhra Pradesh. You must organize the department, develop systems, procedures, and plan activities. You will be a part of the factorys management team. The following are some of the requirements and responsibilities. It changes from time to time. You must be flexible to take care of the needs of the Company. Knowledge Requirement: 1. Must be an established leader and have the capability to lead people of different skills. 2. Must be able to read, interpret, apply, the engineering drawings for various parts, sub-assemblies, components, machines etc. a. Updating documents (engineering drawings, BoM, part-lists, product improvements) in factory, including old and new models and modifications from time to time. 3. Must be fluent in English to read and understand various documents, work with government agencies all over India, and with our principals abroad. a. Must know various measuring instruments used in manufacturing, geometric dimensioning and tolerancing process for engineering drawing and production verifications. 4. Must have hands-on experience in inspection of sheet metal components , machined components , welded and painted components 5. Must have testing knowledge of Petrol and Diesel Engines . 6. Must know how to test various components of machinery e.g., engines, gearbox etc. measuring performance of combustion, emission, torque etc. and prepare necessary reports, to ensure quality of products. 7. Must have hands on experience in Incoming quality of various components like (sheet metal components , machined components ,rubber components , plastic components ,plated components ,BOP components ). 8. Must have hands on experience in in process quality and final product quality 9. Need to interact with suppliers and get Corrective action report in case of non-conforming supplies . 10. Must have hands on experience in warranty analysis. 11. Must have knowledge of inspection of various jigs, fixtures, tooling etc. 12. Must be able to work with vendors domestic and foreign, to ensure quality parts, raw material in timely and cost-effective manner. 13. Must work with our sales and service teams across all branches to resolve any product issue. 14. Must have hands on experience in Dock audit and Process audit . Factory Maintenance: 1. Must have knowledge of using ,maintaining and calibrating various gauges , jigs and fixtures. 2. Periodic checks and calibration of various equipment to ensure working conditions in manufacturing or service. Keep record of calibration. 3. Record keeping of calibration done, instrument breakdowns, change in process or components. Certification & Compliance Responsibility: 1. Working knowledge of various certifications, testing and quality standards is required. 2. BIS:ISI and FMTTI certification: You should have a working knowledge of the certification process. You will be responsible for preparation of application, follow-ups during testing, correction in documentation or product as needed to achieve final goal of compliance and certification. 3. System implementation Knowledge ISO 9001, ISO 14001, ISO 45001, ISO 50001, TS 16949 . 4. You will be responsible for record keeping at the factory to comply with various certifications. Required experience: At least 10 years in Quality Head level in agricultural machinery or automotive (2-wheeler or 4-wheeler) segment, strong skills in quality assurance , customer-interface, written and verbal communication, trouble shooting and creative thinking etc. Education: BE or B.Tech in Mechanical or Automobile or Production or Industrial Engineering You will need to occasionally travel to HO, branches, customer locations, and vendors to address various issues.

Requirements: Tool Design & Development The person will be handling a team of 2-3 people. Skills: Press tool Design Tool Trouble shooting. Trouble Shooting, Press Tools, Design Tool

Greetings from AarnaHR!!! Aarna HR Solutions is a Human Resource Recruitment Company providing services to Various IT, ITES and Non- IT companies across India. Aarna HR Solutions strive towards hiring the best and the brightest talent in the industry. We hire individuals with a strong sense of pride in their performance, team spirit, and a desire to excel. www.aarnahr.com Sr. Manufacturing Engineer / Manufacturing Engineer 5 to 10 Years Regular connect with Opco's stakeholder to understand manufacturing process requirement. Design Jigs& Fixtures, Material handling systems from concept stage to final design. Participate in Design reviews and getting approval from Opco key stakeholders. Generate and publish project status on weekly basis. Supplier management to get work done on timely basis inline customer quality requirement. Ensure First time right and on time project delivery. Teamwork and collaboration with another internal department. Jigs, fixtures, and Equipments Design & Development : Good understanding of tool (Jigs & Fixtures for welded assemblies / other equipment trolley, tackle, quality gauges, Material handling systems etc) design principles and their impact on manufacturing, EHS & Quality, including good experience of CAD Software (Pro-E, PDM windchill, Solid Works etc). Manufacturing Drawings: Experience in creating manufacturing drawing for Jigs and Fixtures using CAD software listed above with GD&T and Welding symbols. Understanding of manufacturing processes, equipment, materials, and quality control principles is crucial. This includes experience in fabrication, assembly, task sequence, time study, process and plant layouts. Knowledge of Machining process. Process Improvement Methods : Proficiency in methodologies like Lean Manufacturing, VSM, Six Sigma, Kiazen, Lean Time Study etc. Data Analysis and Problem-Solving: Ability to interpret data / customer requirement from various sources like production issues, FEA reports and solve manufacturing problems. Experience in Order Entry through PDM Windchill Must have skills: CREO , Solid Works, Windchill, Boivin, Additional skills (Good to have) : Factory simulation, Delmia, FEA tools- CREO Simulate, SOLID Works Simulation, ANSYS will have additional advantage. Communication and Interpersonal Skills : - Ability to communicate effectively with both technical and non-technical audiences. - Ability to work collaboratively in a team environment. MS Office - Proficient with MS excel 1.Total Exp 2.Relevant Exp 3.Reason for Change of job 4.Reason for Change of location 5 Current CTC 6 Expected CTC 7.Notice period HR TEAM, AarnaHR Solution Pvt Ltd, Vidyaranyapura,Bangalore-560097 Email ID surekha@aarnahr.com