Scope and Area of ResponsibilityKnowledge / Experience – 8 to 10 years preferably in automotive applicationThis position is primarily responsible to lead D&D of eSCVs in durability, MBD, vibration and crash domains.Performing baseline static analysis at part, system and vehicle levels, Analyse failure zones and provide recommendations.Need to support design confirmation, test support and test-to-CAE correlation.Regular interaction with the leads, Liaison Engineer and Component Module Leaders in an efficient manner to give conclusive feedback and design recommendations.Understanding of design constraints and ensure due consideration is given in developing solutions.Lead a team size of 3 CAE Engineers.Responsible for planning and scheduling for effective utilization of manpower and software and hardware for successful projects execution.Deliver with highest quality standards in CAE.Mentor new team members on technical skills as part of their job trainingEssentialWork experience in CAE Pre-and Post-processor - Hyper mesh, Hyper view, Optistruct, Radioss, Motionsolve and HyperlifeExpertise in model build, analysis and post processing of full vehicle level and system level linear static Analysis with inertia relief, gravity loads and Modal Analysis.Expertise in model build, analysis and post processing of full vehicle level and system level frequency response analysis with data from RLDA.Expertise in non linear analysis of joint regions, preloaded structures and seals.Experience in certification related crash test at ARAI.Basic knowledge in vehicle dynamicsPast experience in providing design suggestions based on analysis listed above.Experience in CAE to test co-relation, vehicle target settings and refinements as per latest automotive trends.Theoretical knowledge of finite element analysis. Good communication, report writing, technical documentation and presentation skills.Knowledge of different regulatory and non-regulatory requirements.Qualification:BE/B. Tech or ME/M.Tech in Mechanical/Production/ Automotive Engineering
Department: Battery Management System (BMS) Location: Coimbatore Role Summary: The Battery Pack Development Manager will lead cross-functional efforts in the design, development, and validation of lithium-ion battery packs for mobility and ESS applications. This role oversees architecture, electrical & mechanical design of modules and packs, integration of hardware/software, BMS calibration, Test plan development and oversight of execution, performance calibration, coordination for certification and support for serial production. Key Responsibilities: Technical Leadership: Lead the architecture, sizing, and configuration of battery packs (series/parallel, energy density, thermal, mechanical). Guide cell selection, pack modeling, and trade-off decisions (energy vs. power cells). Approve schematics, layouts, and integration strategies with BMS hardware/software teams. Ensure design compliance with automotive safety standards Project & People Management: Create and own battery pack product development roadmap in sync with vehicle platforms or ESS applications. Define performance KPIs, track deliverables, and manage risk registers. Mentor team members, run performance reviews, and recommend R&R nominations. Collaborate with procurement, suppliers, and OEM customers for pack development alignment. Testing & Validation: Oversee pack validation plans (thermal, electrical, mechanical). Coordinate HIL/SIL simulations and manage issue closure. Sign off pre-SOP test reports, detailed failure analyses, and documentation. Cross-Functional Coordination: Liaise with vehicle architecture, drivetrain, thermal, and homologation teams. Drive design reviews, MoMs, internal documentation, and approvals. Required Qualifications: B.E/B.Tech or M.E/M.Tech in Electrical, or Mechatronics Engineering. 8–12 years of experience in Li ion battery pack development for EVs and/ or ESS Hands-on with cell chemistry selection, battery modeling, and thermal simulations. Familiarity with CAN, UDS protocols, and BMS architecture. Prior experience managing cross-functional engineering teams Innovative mindset, strong drive and team player Show more Show less
We're Hiring: CFO 📍 Location: Coimbatore | 🏢 Jayem Automotives Pvt Ltd., Jayem Automotives is looking for a dynamic finance leader to join our core team. As we scale our EV and Automotive engineering business, we need a CFO who can combine financial discipline with strategic thinking. We are looking for CA/CA+MBA finance professionals with ambition, entrepreneurial attitude & high risk appetite. 🧩 Key Responsibilities: Budgeting, costing, and MIS Statutory accounting & compliance Fundraising & Banking Audit & Internal controls IT & systems oversight (SAP/ERP) 📩 Interested? email your profile to hr7@jayemauto.com
Job Description Tool Design Engineer Position: Assistant Manager / Manager Tool Design Department: Tool Design / R&D / Proto Development Industry: Automotive Components (Aluminium Casting & Proto Components) Location: Coimbatore Role Summary We are looking for an experienced Tool Design Engineer to lead and execute tool design activities for aluminium casting and automotive proto components. The role involves conceptualizing, designing, validating, and optimizing tooling solutions using Creo to meet functional, cost, and timeline requirements. The candidate will also be responsible for guiding a small team and coordinating with cross-functional teams including production, quality, and R&D. Key Responsibilities Design and develop dies, moulds, and tools for aluminium casting and proto auto components using Creo . Prepare and review 3D models, 2D drawings, BOMs, and GD&T documentation . Perform feasibility studies, DFMEA, and tool validation in line with project requirements. Optimize tool design for manufacturability, cost-effectiveness, and durability . Collaborate with manufacturing, machining, and quality teams for tool trials, validation, and approval. Provide technical guidance to junior design engineers and technicians. Interact with customers for requirement gathering, design reviews, and technical presentations . Support proto development and new product introduction (NPI) projects. Troubleshoot and resolve tool-related issues during trials and production runs. Ensure timely project delivery within budget and quality standards. Required Skills & Competencies Strong expertise in Creo (Pro-E) for 3D/2D tool design. In-depth knowledge of aluminium casting processes. Hands-on experience with automotive proto components and tool design validation . Good understanding of tool steel, heat treatment, and machining processes . Knowledge of GD&T, tolerance stack-up, and engineering standards . Analytical and problem-solving skills with attention to detail. Strong project management and team-handling skills. Good communication and presentation abilities. Qualifications & Experience B.E./B.Tech / Diploma in Mechanical, Automotive, or Relevant 8 to 12 years of experience in tool design for automotive / aluminium casting industry. Experience as Assistant Manager / Manager level with exposure to team leadership preferred UG: B.Tech/B.E. in Automobile, Production/Industrial, Mechanical, Metallurgy, Mechatronics, Mechatronics Engineering, Production Engineering Key Skills Skills highlighted with ‘‘ are preferred keyskills Tool DesignCreo Prototype Development New Product DevelopmentPro-E patteAutomotive Component About company COMPANY We are Jayem Automotives (P) Ltd., a globally recognized leader in automotive innovation and engineering excellence since 1940. Over the past four decades, Jayem has become Indias only independent, knowledge-based automobile R&D company, committed to driving innovation in automotive design and performance. For over two decades, we have also been a prominent supporter of motorsport, managing race and rally programs for renowned names in the industry. With around 1000 employees working in-house and on-site, Jayem's vision is to become a world-class automotive technology developer and manufacturer. Our cutting-edge expertise has been instrumental in designing high-performance vehicles and components for a variety of successful projects. Jayem Automotives has now entered a strategic partnership with TI Clean Mobility Private Limited (TICMPL), a subsidiary of the Murugappa Group's Tube Investments of India (TI). Together, this partnership focuses on revolutionary projects that aim to shape the future of mobility in India. This collaboration emphasizes sustainability, performance, and advanced technology, paving the way for innovative transportation solutions. VISION To be a world class Automotive Technology Developer and Manufacturer. MISSION Jayem is focussed on providing total R&D Solutions from Digital to Physical to enable the manufacture of world class, environment friendly, customer oriented & premium performance automobiles. https://www.jayemauto.com/ https://timesofindia.indiatimes.com/business/india-business/tube-investments-subsidiary-ticmpl-picks-up-50-stake-in-jayem-auto/articleshow/101464855.cms E-MOBILITY Jayem has developed in house expertise of building e-mobility system. Powertrain System: Critical to the performance of any EV is a thorough understanding of the drive cycle and its performance requirements. We have developed powertrain system including Li-Ion Battery cell integration of different chemistries and its health monitoring and management. Traction System: Traction control plays an important role in vehicle motion control because it can directly enhance drive efficiency, safety, and stability. Our traction system includes single speed very low noise high precision Transmission assembly, very efficient and powerful induction Motor and Motor controlling system with many advanced features. Power Electronics System: Power electronics is becoming more important in the performance and cost of an electric vehicle as conventional powertrains will become obsolete in the near future due to tougher regulations and the ongoing quest for performance improvement including better life and reliability. We have developed Charger, Charge Protection System, Fast Charging System etc. Electrical HVAC system: We have developed very efficient and effective electrical HVAC system which will improve the comforts of the occupants by rapid cooling and warming the cabin. Vehicle information and monitoring system: Our vehicle information and monitoring system consists of Vehicle Control unit and fully programmable LCD base Cluster, displaying the Vehicle information. Remote diagnosing and Connected Car system: GPRS based Telematics enable to connect the car with the Server for remote diagnosing and monitoring the vehicle status. Mobile App will also enable to understand the vehicle condition and control the vehicle. Our E-mobility system has been developed in such a way that, it can be adopted very easily on to any conventional small and mid-size vehicles. The components and the systems are fully validated with bug free software. We undertake the vehicle integration as per CMVR requirements. Company Info Address: 2,,NA,ONDIPUDUR ROAD,SINGANALLUR , COIMBATORE, Tamilnadu, India