158 Isometrics Jobs - Page 4

The officer will be a part of the confirmation drafting team for Foreign Exchange, Money Market, Equity Derivatives, Credit and Interest Rate Derivatives and Commodity trading (power, gas, oil, precious metals). Responsibilities Drafting Team: The Drafting team is responsible for ensuring that all BNP Paribas confirmations are Dispatched to clients i.e Interbank and Corporate Clients. The team covers a wide range of products traded by the Trading desks such as Vanilla products and the more complex Structured trades. The Drafting team is also responsible to perform final verification of the trade economics before dispatching the final confirmations to counterparts. The team works closely with other Trade Processing teams, legal teams and Front Office to ensure timely communication for any booking discrepancies, template issues and outstanding confirmations. Minimize operational failure, including but not exclusively the risk of fraud by helping to devise and by implementing sufficient regular controls Ensure appropriate escalation to management as soon as an issue is identified. Ensure that documentation controls are done daily, comments detailed clearly, and be responsible for reliability of records for EQD Derivatives Ensure set KPIs are met Play a Role in Project Management Contributing Responsibilities Continuous Control Improvement: Continuous review of processes and controls ensuring we minimize the Operational Risk to BNP Paribas. Contribute to the Permanent Control framework Projects Participate to global projects related to any Documentation processes improvements. Play a key Role in Project Management Key results areas: Process Alignment Capacity to handle analysis/ continuous improvement/light touch projects Transversality of the global setup Technical Behavioral Competencies Technical competencies : Fluent English ISDA definitions templates Front to back workflow Risk Management Strong analytical skills Ability to innovate Strong team player and strong problem-solving mindset as well as client-oriented Advanced proficiency in Excel presentations Behavioral Competencies : Organized good resistance to stress Attention to detail Ability to prioritize workloads use a proactive approach to meet deadlines Self-discipline autonomy Adaptability Change Management: Fungible resource who is ready to adapt Strong Client Focus: Client is at the center of all our concerns. Escalation Reporting Effective escalation and consensus builder Specific Qualifications(if required) Experience in Documentation prefered (drafting /chasing/matching) Bachelor or Master Degree on Economics, Mathematics or Finance. Fluent in English (both oral and written communication) Skills Referential Behavioural Skills : (Please select up to 4 skills) Attention to detail / rigor Ability to deliver / Results driven Client focused Communication skills - oral written Transversal Skills: Ability to set up relevant performance indicators Ability to understand, explain and support change Analytical Ability Ability to anticipate business / strategic evolution Ability to understand, explain and support change Education Level: Bachelor Degree or equivalent

Should know land searching related works Index I and Index II Report of Title RS to LR Deed Preparation Should know to make title report by going through deeds. Should have good connections in BLRO offices Should have good connectionsShould know to draft & vet documents. Should be competent to draft deeds write up. Should know how mutation and etc are done. Should be well versed with Khatian, parcha, etc.

Career Area: Engineering : Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you'rejoining a global team who cares not just about the work we do but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don'tjust talk about progress and innovation here we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Role Definition Engineering support for Large Power Systems Products (Reciprocating Engines & Gensets) Manufacturing to ensure effective Built in Quality and technical issue resolution Responsibilities Engineering support for operations team during introduction and regular production of engines and gensets, support resolve issues from shop floor with high velocity Built in Quality engineering issue resolution and communication, document and review all issues with appropriate issue owners, working with cross functional team to implement design fixes/changes, Work with design control and platform team to resolve / approve any required deviations and PCNs working closely with other engine / genset design team members and other component teams, as well as validation engineers to determine component and pack configuration, design, detailing and problem resolution Participate in the design processes in a manner to ensure products provide superior performance, durability, quality, and serviceability Assisting supply specialists and buyers with supplier development and supplier performance. Overseeing the efforts of drafting and testing specialists. Participating in and supporting proposal preparation, cost estimates, and technical reports Understanding and adhering to project schedule Support CQMS, ISO 9001 and ISO 14001 documentation and audits, support and work in non-normal business hours as needed to work with global team Requires a degree in an accredited Mechanical / Electrical Engineering degree or equivalent, experience working in Power Systems (Reciprocating Engines / Genset) Product Development / Factory Support Requires Proficiency with ProE, TeamCenter, and other design / BOM management tools, knowledge of New Product Introduction and Current product issue resolution processes Requires Proficient communication skills Degree RequirementDegree requiredSkill DescriptorsAnalytical ThinkingKnowledge of techniques and tools that promote effective analysis; ability to determine the root cause of organizational problems and create alternative solutions that resolve these problems.Level Working KnowledgeApproaches a situation or problem by defining the problem or issue and determining its significance. Makes a systematic comparison of two or more alternative solutions. Uses flow charts, Pareto charts, fish diagrams, etc. to disclose meaningful data patterns. Identifies the major forces, events and people impacting and impacted by the situation at hand. Uses logic and intuition to make inferences about the meaning of the data and arrive at conclusions.Effective CommunicationsUnderstanding of effective communication concepts, tools and techniques; ability to effectively transmit, receive, and accurately interpret ideas, information, and needs through the application of appropriate communication behaviors.Level Working KnowledgeDelivers helpful feedback that focuses on behaviors without offending the recipient. Listens to feedback without defensiveness and uses it for own communication effectiveness. Makes oral presentations and writes reports needed for own work. Avoids technical jargon when inappropriate. Looks for and considers non-verbal cues from individuals and groups.Managing Multiple PrioritiesKnowledge of effective self-management practices; ability to manage multiple concurrent objectives, projects, groups, or activities, making effective judgments as to prioritizing and time allocation.Level Working KnowledgeRecognizes changing demands and priorities; validates changes with management. Obtains information about how current assignments contribute to organizational goals. Completes current work according to assigned priorities. Responds to day-to-day operational priorities while still making progress on project work. Performs at least 2-3 concurrent activities without reducing productivity.Technical ExcellenceKnowledge of a given technology and various application methods; ability to develop and provide solutions to significant technical challenges.Level Working KnowledgeProvides effective technical solutions to routine functional challenges via sound technical competence, effectively examining implications of events and issues. Effectively performs the technical job aspects, continuously building knowledge and keeping up-to-date on technical and procedural job components. Applies technical operating and project standards based on achieving excellence in delivered products, technologies and services. Applies current procedures and technologies to help resolve technical issues in one's general area of technical competence. Helps others solve technical or procedural problems or issues.Computer-Aided Design & EngineeringKnowledge of tools and techniques of specialized graphics programs; ability to produce, analyze, simulate and test product design drafts.Level Working KnowledgeGenerates specifications for parts or components with CAD software. Reuses design components via reusable libraries following standard procedures. Uses CAD to perform basic drafting such as wire frames, solid objects and array of objects. Performs routine changes to computerized schematics or drawings. Creates views of objects in 2 and 3 dimensions; creates perspective drawings and orthogonal views.Product Design - MFGKnowledge of processes, approaches, tools and techniques of product design; ability to convert customer and market requirements into product design.Level Working KnowledgeParticipates in the conception process of a manufacturing product vision. Collects and analyzes customer and market requirements, and generates reports. Utilizes design methods to implement the construction of a new design model. Uses automated tools to design or modify the design of a product. Assists in the testing and refinement of a new product design.Product Design and DevelopmentKnowledge of product features; ability to design, build, and develop a new product, technology, or service from concept through to production.Level Working KnowledgeBuilds three-dimensional models with basic materials. Communicates with professionals to understand various requirements of product design. Tests and evaluates alternative means of production being considered for use. Uses automated tools to design or modify the design of a product. Assists in building a complex prototype of product.This is intended as a general guide to the job duties for this position and is intended for the purpose of establishing the specific salary grade. It is not designed to contain or be interpreted as an exhaustive summary of all responsibilities, duties and effort required of employees assigned to this job. At the discretion of management, this description may be changed at any time to address the evolving needs of the organization. It is expressly not intended to be a comprehensive list of essential job functions as that term is defined by the Americans with Disabilities Act.

Career Area: Engineering : Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you'rejoining a global team who cares not just about the work we do but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don'tjust talk about progress and innovation here we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Role DefinitionEngineering Change Management and BOM Updates support for Large Power Systems Products (Reciprocating Engines & Gensets) Manufacturing Responsibilities Engineering support for the Change Management process to support Operations team during introduction and regular production of engines and gensets, and support resolve issues from shop floor with high velocity Perform / ensure accurate BOM updates or changes in CBS system at the facility per product engineering specs in coordination with Facility Change Coordination and Product Management teams Lead / Support key Change Management process steps that include - Receiving change notification requests (PACN / PLACN / EDS Notification/ Job Number), Reviewing and determining necessary change actions in the facility based on product checks, effectivity dates, etc., Implementing updates in the CBS systems following standard procedures, coordination with the Facility change coordination team and other relevant cross functional teams as required, managing further change actions to the established effective dates as required by working with the Manufacturing teams, etc. Document and maintain the change process and tools with metrics for review and support improvement opportunities Requires bachelors degree in mechanical engineering or equivalent, experience working on Power Systems Design / Development / Manufacturing processes, Proficiency in change management and tools like CBS, etc. Requires Proficiency with ProE, TeamCenter, and other design / BOM management tools, knowledge of New Product Introduction and Current product issue resolution processes Requires proficient communication and coordination skills Degree RequirementDegree required Skill DescriptorsAnalytical ThinkingKnowledge of techniques and tools that promote effective analysis; ability to determine the root cause of organizational problems and create alternative solutions that resolve these problems.Level Working KnowledgeApproaches a situation or problem by defining the problem or issue and determining its significance. Makes a systematic comparison of two or more alternative solutions. Uses flow charts, Pareto charts, fish diagrams, etc. to disclose meaningful data patterns. Identifies the major forces, events and people impacting and impacted by the situation at hand. Uses logic and intuition to make inferences about the meaning of the data and arrive at conclusions. Effective CommunicationsUnderstanding of effective communication concepts, tools and techniques; ability to effectively transmit, receive, and accurately interpret ideas, information, and needs through the application of appropriate communication behaviors.Level Working KnowledgeDelivers helpful feedback that focuses on behaviors without offending the recipient. Listens to feedback without defensiveness and uses it for own communication effectiveness. Makes oral presentations and writes reports needed for own work. Avoids technical jargon when inappropriate. Looks for and considers non-verbal cues from individuals and groups. Managing Multiple PrioritiesKnowledge of effective self-management practices; ability to manage multiple concurrent objectives, projects, groups, or activities, making effective judgments as to prioritizing and time allocation.Level Working KnowledgeRecognizes changing demands and priorities; validates changes with management. Obtains information about how current assignments contribute to organizational goals. Completes current work according to assigned priorities. Responds to day-to-day operational priorities while still making progress on project work. Performs at least 2-3 concurrent activities without reducing productivity. Technical ExcellenceKnowledge of a given technology and various application methods; ability to develop and provide solutions to significant technical challenges.Level Working KnowledgeProvides effective technical solutions to routine functional challenges via sound technical competence, effectively examining implications of events and issues. Effectively performs the technical job aspects, continuously building knowledge and keeping up-to-date on technical and procedural job components. Applies technical operating and project standards based on achieving excellence in delivered products, technologies and services. Applies current procedures and technologies to help resolve technical issues in one's general area of technical competence. Helps others solve technical or procedural problems or issues. Computer-Aided Design & EngineeringKnowledge of tools and techniques of specialized graphics programs; ability to produce, analyze, simulate and test product design drafts.Level Working KnowledgeGenerates specifications for parts or components with CAD software. Reuses design components via reusable libraries following standard procedures. Uses CAD to perform basic drafting such as wire frames, solid objects and array of objects. Performs routine changes to computerized schematics or drawings. Creates views of objects in 2 and 3 dimensions; creates perspective drawings and orthogonal views. Product Design - MFGKnowledge of processes, approaches, tools and techniques of product design; ability to convert customer and market requirements into product design.Level Working KnowledgeParticipates in the conception process of a manufacturing product vision. Collects and analyzes customer and market requirements, and generates reports. Utilizes design methods to implement the construction of a new design model. Uses automated tools to design or modify the design of a product. Assists in the testing and refinement of a new product design. Product Design and DevelopmentKnowledge of product features; ability to design, build, and develop a new product, technology, or service from concept through to production.Level Working KnowledgeBuilds three-dimensional models with basic materials. Communicates with professionals to understand various requirements of product design. Tests and evaluates alternative means of production being considered for use. Uses automated tools to design or modify the design of a product. Assists in building a complex prototype of product. This is intended as a general guide to the job duties for this position and is intended for the purpose of establishing the specific salary grade. It is not designed to contain or be interpreted as an exhaustive summary of all responsibilities, duties and effort required of employees assigned to this job. At the discretion of management, this description may be changed at any time to address the evolving needs of the organization. It is expressly not intended to be a comprehensive list of essential job functions as that term is defined by the Americans with Disabilities Act.

Produce , check complex piping plans and layouts, piping isometrics sketches & electronic 3D models for equipment in accordance with project requirements, codes, specifications & procedures. 3D Piping Design Isometric generation from Process P&ID's. Required Candidate profile A degree in Mechanical Eng, Min of 9+ years’ piping design experience Min of 3 years’ experience in the SP3D Software with oil & gas background.

bigbraincreations is looking for Graphic Design Faculty to join our dynamic team and embark on a rewarding career journey Planning concepts by studying relevant information and materials. Illustrating concepts by designing examples of art arrangement, size, type size and style and submitting them for approval. Preparing finished art by operating necessary equipment and software. Coordinating with outside agencies, art services, web designer, marketing, printers, and colleagues as necessary. Contributing to team efforts by accomplishing tasks as needed. Communicating with clients about layout and design. Creating a wide range of graphics and layouts for product illustrations, company logos, and websites with software such as photo shop. Reviewing final layouts and suggesting improvements when necessary. Conceptualize visuals based on requirements Prepare rough drafts and present ideas Develop illustrations, logos and other designs using software or by hand Ensure final graphics and layouts are visually appealing and on-brand

Role & responsibilities 1. Assist project team in preparing MTOs and BOQs from Isometrics 2. Entry of Piping and Welding data in the companys in-house piping solutions in TrooNote 3. Co-ordinate with the IT team in identifying any challenges in the system and getting them resolved 4. Assist with project team in preparing Test Packs for piping works and keeping track of the activities Produce piping works reports as and when required to monitor progress Preferred candidate profile 1. Hands on experience in measurement of UG and AG piping works 2. Prepare MTO from the Isometric drawings 3. Measure piping work quantities based on SMM and project specific D&M 4. Knowledgeable in various types of Pipe Supports and able to prepare MTOs & BOQs 5. Able to prepare weld maps, field joints location grouping and mating spools IDs 6. Working well versed experience in MS Excel 7. Good oral and written communication Working knowledge in AutoCAD for piping is required

Be able to take MTO from P and ID and plot plan. should be familiar with spec break, PMS, apply legend PID to actual MTO, specialties item ,fully conversant with excel, knowledge of WBS, Iso sketches, familiar with navisworks, hook up drawings

Lead HVAC Engineer Experience 12 to 15 years into similar profile with HVAC Design or HVAC Engineer in pharma consulting . Qualification BE/ B Tech in Mechanical Responsibilities: Basic understanding of the equipment and systems of API, Oral Dosage, Injectable and Biotech formulation facility. Read and understand isometric, P&ID and as built drawings. Understanding of API / Formulation Process equipment Operation HVAC system design & Calculation BMS system design & Calculation Knowledge and understanding of all relevant local statutory compliance requirements. Manager/ Principle Engineer HVAC Experience 15 plus years of experience into HVAC Design Engineering with team handling experience in pharma consulting Qualification BE/ B Tech in Mechanical Responsibilities: Complete HVAC system design with Heat Load Calculation, Air flow design, Cold room / Blast Chiller design & heat load Calculation, Air flow diagrams. HVAC duct sizing and double line Duct routing layout with complete details. Prepare/Review/Approve Design Drawings & Documents as project deliverables Plan subtask for self and subordinates and remain accountable for total manhour expenses. HVAC system design & Calculation. BMS system design & Calculation. Comprehend and implement internal standards & Guidelines while delivering any job task. Prepare and submit monthly Reports Prepare KRAs for the Team.

Executive Projects Qualification B.E / B.Tech in Mechanical/ Chemical Experience 8 plus years in Formulation Projects JD Prepare/Review Design Drawings as project deliverables. Prepare Documents as project deliverables. Knowledge and understanding of relevant Design Guidelines & Statutory Requirements

Executive Projects Qualification B.E / B.Tech in Mechanical/ Chemical Experience 8 plus years in Formulation Projects JD Prepare/Review Design Drawings as project deliverables. Prepare Documents as project deliverables. Knowledge and understanding of relevant Design Guidelines & Statutory Requirements

Experience in detailed engineering, Plant Layout, Piping layouts, Piping GA Drawings, Isometrics Development of Piping Material Specifications, Material take off. Should have working experience on international piping standards Having Exposure of PDMS Software. Should be an effective communicator & team leader, able to handle team of engineer & designers.

Monsoonfish Inc. UX & UI Design agency is looking for Graphic Design Intern to join our dynamic team and embark on a rewarding career journey Planning concepts by studying relevant information and materials. Illustrating concepts by designing examples of art arrangement, size, type size and style and submitting them for approval. Preparing finished art by operating necessary equipment and software. Coordinating with outside agencies, art services, web designer, marketing, printers, and colleagues as necessary. Contributing to team efforts by accomplishing tasks as needed. Communicating with clients about layout and design. Creating a wide range of graphics and layouts for product illustrations, company logos, and websites with software such as photo shop. Reviewing final layouts and suggesting improvements when necessary. Conceptualize visuals based on requirements Prepare rough drafts and present ideas Develop illustrations, logos and other designs using software or by hand Ensure final graphics and layouts are visually appealing and on-brand

Headout is looking for Graphic Design Intern, Brand to join our dynamic team and embark on a rewarding career journey Planning concepts by studying relevant information and materials. Illustrating concepts by designing examples of art arrangement, size, type size and style and submitting them for approval. Preparing finished art by operating necessary equipment and software. Coordinating with outside agencies, art services, web designer, marketing, printers, and colleagues as necessary. Contributing to team efforts by accomplishing tasks as needed. Communicating with clients about layout and design. Creating a wide range of graphics and layouts for product illustrations, company logos, and websites with software such as photo shop. Reviewing final layouts and suggesting improvements when necessary. Conceptualize visuals based on requirements Prepare rough drafts and present ideas Develop illustrations, logos and other designs using software or by hand Ensure final graphics and layouts are visually appealing and on-brand

Responsibilities: * Manage E3D database using SP3D software. * Collaborate with engineering teams on piping designs and layouts. * Create isometric drawings and plot plans. Health insurance

Create Piping Layout, Plans, Equipment Layouts, Piping BOM, Supports and Isometrics using AutoCAD 2D Collect data from sites and prepare drawing Understand PMS,VMS & P& ID. Proficiency in ADSK Plant3D/Cadworks software will be an added advantage. Provident fund

BE. Mechanical with 4-8 years of experience in Piping Stress activities in Oil & Gas, Refineries, Petrochemicals; Proficiency in CAESAR software; Conversant with stress analysis of piping connected to various types of equipment; Conversant with requirements like trunnion calculation, flange leakage calculations, qualification of allowable nozzle loads etc

Position: Principal /Senior Engineer Piping; YOE: 15+ Years; Contract:On Permanent Role; Location:Hyderabad (Gachibowli). We re hiringPrincipal /Senior Engineer Pipingfor one of our Leading MNC in Oil & Gas to join their growing team. This position is based out inHyderabad (Gachibowli) Education: B.E or B.Tech; Total Years of Experience: 15+ yrs; Skills /Area of Expertise: 15+ Years of Experience in piping Design activities; Lead and supervise Sr. Engineers / Engineers / Designers / Modelers; Overview of Plot plan, Equipment layout, Piping layout, Isometrics and support details; Ensure and maintain the International Standards like ASME, ANSI, DIN, EN, ISO, BS etc., in piping design; Ensure that all design in compliance with local authorities code requirement.

Sr. Designer is responsible for quality of 2D Drawings/ 3D model and quality of all model based deliverables like Isometrics, GAD s, Civil & Mech information drawings, supporting and support sketches. Should guide juniors and coordinate with AE for individual areas and sort out all technical problems of area. Should be able to explain / participate in plot plan meetings with internal / external customers. Shall understand in depth P&ID requirements and should be able to design piping network to take care of the same in the piping design. Shall be able to read vendor drawings and shall be able to provide comments to suit piping design needs. Able to prepare nozzle orientation drawing, support clips, GA, Plot Plans. Should understand usage of Check Lists. Should be able to participate in 3D Model reviews. We are recruiting a Piping Designer / Quality Checkerto join one of our leading multinational clients and their expanding team. This position is based in Bangaloreand offers an excellent opportunity for experienced proposal management professionals in the Conventional Energysector. Department: Piping Qualification: Diploma, ITI, Draughtsman Year of Experience: 15-25 Years Must have min. 2 nos. FPSO Topside Detail Engineering execution experience.

Support piping design/drafting for shutdowns, maintenance & capital projects. Update P&IDs, PFDs, isometrics. Ensure QA/QC, adherence to specs & standards. Coordinate with engineers. Lead team, manage drafting tools & vendor interfaces (Lead). Required Candidate profile 3–10 years drafting experience in refinery/LNG facilities. Proficient in AutoCAD, CADWorx. Skilled in P&IDs, PFDs, isometrics. Strong QA/QC, team coordination, and familiarity with design standards.

4 years of experience in PDMS/E3D software. Good experience in Pipe modelling , Structural & civil modelling, Equipment modelling Good knowledge on Navis works is preferred. Isometric, BOM and draft extraction into Acad and Pdf. Authority in PDMS and preference for E3D software. Should be able to route the pipe considering all the constraints but according to given P&ID. Piping support knowledge. Working Knowledge on AutoCAD is a must. Experience in Pipe size, support size calculation is added advantage. Knowledge of different piping standards and codes preferred. Should take the ownership of the job and manage independently without any support. The desired candidate should be with an engineering Diploma/Degree in Mechanical with 7 years of Piping experience out of which 4 years in PDMS/E3D is required.

Job Description -: Design Manager Desired profile & experience: - Above 12+ years relevant work experience, 3 of which must be as a Managerial role in Oil and Gas industry. Software skill: PDMS, E3D, SP3D Specific Core Competencies and Skills required: Skilled in own discipline Project Management fundamentals Team leadership skills Personal attitude needed: Target-oriented Coaching attitude Proactive approach Job Description -: Input to own Line Manager to ensure availability of correct competence (for example internal and external recruitment) • Service and work process development for own team: • Develop efficient design methods and tools • Ensure cost-efficient design • Integration and connectivity of designed solutions/products to other disciplines • Right quality and functionality of designed solutions/products • Fulfilment of stated requirements • Competence development & resource management within own team • Performance management for own team Prepare the work assignment and monitoring plan for the Basic/Detail engineering team to ensure the alignment with the project objectives, schedule, quality and budget. Report the concerns in the project such as the project budget and its allocation, resourcing, competence requirements to ensure project execution within the required time and budgeted hours to the Line Manager. Lead the project team to ensure the resolution of discipline issues in a timely and effectively manner. Verify and manage contractual requirement and inputs for the design works in the project. Assign the design work like, deliverable and activities to each engineer and distribute necessary information to execute his design engineering work. Coordination with other disciplines, client, vendors and engineering subcontractors to ensure design engineering work and output will meet the project objectives. Understand and discuss the special requirements of the project with the team to propose alternate solution and cost down ideas. Propose alternatives to client with technical justification. (Value Engineering concept) Responsible for Preparation/updation of list of deliverables for different activities in the project. Development of the LE within the team.

At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good, Your impact Experience Of Working In Paints Projects Preferred, Review and understand the scope of works along with BOQ (based on contract provided by client) Candidate should have sound knowledge of basic engineering principles and be well versed with the Standard Codes Supervise to ensure that contractor is executing the construction activities as per the drawings, specifications, relevant codes/standards Technical knowledge to supervise execution of construction work for Mechanical Equipment erection, Piping including clean piping, structural fabrication/erection, package units etc Study of drawings and obtain clarification through RFIs for any discrepancies missing details / mismatches from Projects and Engineering Review and approve the quality plan, Inspection & Test plan and work procedures submitted by contractors Monitor the compliance of quality requirement as per approved quality plan and ITP during execution, Issuing of quality noncompliance note to contractors in case of sub-standard works and follow up with contractors for get it corrected Maintain a tracker for the same Performing of tests through contractor, witness and recording and maintaining documentation, Monitor through contractors that QC check sheets are prepared and maintained for the works being executed Co-ordinate with other discipline engineers for release of fronts to contractors, Prepare and issue punch list on completion of each area Follow up with contractors for attending and closing the punch lists, Scrutiny and certification of contractors RA bills and final bills, whenever required, Follow up with Projects / Engineering team to release the ?Holds? if any in the drawings so that schedule is not affected, Prepare and maintain joint measurement records for all the approved variations / changes, Study the drawings issued for construction in detail well in advance and identify if there is any mismatch between drawings and specifications / BOQ description / construction already carried out as well as any missing details and get required details in time from the concerned Review and approve the quality plan, Inspection & Test plan, erection scheme, resource requirements and work procedures submitted by contractors and ensure contactor is executing the work and meeting the approved plans and procedures Identify the piping MTO requirement based on the piping GA and isometrics issued to site and take up with concerned for any discrepancies Inspection of materials received at site Knowledge to identify the contractor resource requirement to execute the job Understanding and experience in implementation of HSE procedures Monitoring of work progress and Followup with contractors for ensuring the adequacy of required labour resources, machineries and materials to complete the works as per schedule, Should have effective communication skill to convey discrepancies /problem faced / expected at site to the respective lead and client as required Should have specific experience of supervising Finishes of Paint/ Pharma/FMCG / Industrial projects We value collaboration and believe that in-person interactions are crucial for both our culture and client delivery We empower employees with our hybrid working policy, allowing them to split their work week between Jacobs offices/projects and remote locations enabling them to deliver their best work, Here's what you'll need Graduate in Engineering in Mechanical with 8 to12 years in a leading position including working in PMC /EPCM role Candidates from Consultancy background would be preferred ,

As a Piping Material Engineer with Worley,you will work closely with our existing team to deliver projects for our clients while continuing to develop your skills and experience etc. You will provide Piping Engineering services to Worley, and its customers and may provide technical support within the Piping team. Ensure compliance with various ASME, API & IBR codes and standards. Perform valve take off from P&IDs. Review Piping isometrics take-offs. Keep track of all Design changes and managing surplus / needs. Monitor material requirements and adjust material delta requisitions. Learn to develop and update requisitions within the ERM system. Knowledgeable compiling of requisition packages with all applicable documents. Design and selection of Piping Material Specification for Piping Systems. Preparation of Piping Line Class Specifications. Preparation of Pipe Wall Thickness Calculations. Preparation of Valve Material Specifications. Preparation of MR (Material Requisition) for Getting Quotations. Review the Vendor offers, do technical discussions with the vendors, and prepare TBE (Technical Bid Evaluation). Preparation of Material Requisition for Purchase. Technically Qualify for Vendor Documents Review. Prepare the list of Piping Specialty Items like Steam Traps, Strainers, Hoses, etc. Preparation of Valve Data Sheets. Preparation of Data Sheets for the Piping Specialty Items. Preparation of Line Blank Thickness Calculation. Preparation of Reinforcement PAD Requirement calculation. Preparation of Pipe Sleeve Thickness Calculation. Familiar with Material Grades ASTM, ASME, API, etc. Knowledge in Testing and Inspection Requirements for Piping Components and Valves Compliance with Specifications and Industrial Quality Standards. To be considered for this role it is envisaged you will possess the following attributesMinimum 7 to 12 years experience in the offshore Oil & Gas industry. Good Communication Skill. English Fluent in Speaking and Writing. Good Team Player. Self-Motivated with a Drive for Results, Improvement, and Innovation. Bachelor's degree in engineering in the relevant discipline or equivalent.

Job Description: We are seeking a skilled Pipeline/Piping Designer or Draftsman with experience in digitization of legacy engineering drawings and data for oil & gas facilities. The role involves converting scanned drawings, redlines, and hand-drawn piping diagrams into accurate digital formats (CAD/3D models), ensuring alignment with current engineering standards and database requirements. Key Responsibilities: Review and interpret legacy (paper or scanned) pipeline and piping drawings, P&IDs, isometrics, and general arrangement drawings. Digitize drawings into CAD software (AutoCAD, MicroStation, or equivalent). Develop and update accurate 2D and/or 3D models using modern design tools (e.g., AutoCAD Plant 3D, SmartPlant, PDMS, E3D). Ensure consistency and compliance with industry codes (ASME, API) and project specifications. Tag and structure data associated with drawings to integrate into digital databases (e.g., SAP, AVEVA, Hexagon tools). Coordinate with engineers, document control, and GIS/data teams to validate inputs and resolve discrepancies. Manage file naming, revision control, and data integrity in digital document management systems (DMS/EDMS). Support efforts to migrate drawing data into digital twin environments or asset management systems. Follow safety and confidentiality guidelines while handling sensitive engineering documents. Qualifications: Diploma or Degree in Mechanical Engineering, Drafting Technology, or equivalent. 38 years of experience in oil & gas piping or pipeline drafting/design. Strong expertise in CAD software (AutoCAD, Plant 3D, MicroStation, SmartPlant, etc.). Experience in digitization/conversion of paper-based drawings to digital formats. Knowledge of piping specifications, valve types, materials, and instrumentation layouts. Familiarity with document management systems and digital data structures. Experience with GIS tools or data integration systems is a plus. Ability to read and interpret engineering drawings, standards, and legends accurately. Detail-oriented with excellent organizational and time management skills. Preferred Skills: Experience with digital twin platforms, BIM, or 3D scanning workflows. Familiarity with asset information management tools (e.g., AVEVA NET, Hexagon SDx). Knowledge of data tagging standards (e.g., ISO 15926, CFIHOS). Exposure to SCADA, GIS, or pipeline integrity systems. Employment Benefits: Competitive salary/hourly rate Opportunity to work on high-impact infrastructure digitization Potential for long-term employment or global project exposure Professional training and development support Work Environment: Office-based with occasional site visits. May require flexible hours depending on project deadlines. Regards Ananya B Email Id: hr@occgroups.com HR Department Obul Consultancy & Contracts Pvt Ltd.