384 Iso Documentation Jobs - Page 4

Conduct inspections and examinations of products, processes, to assess their quality and compliance with established standards.Implement quality control procedures and best practices. Maintain detailed records of quality assessments and test results. Required Candidate profile Diploma / BE with 1+ year of experience in Quality department of engineering company. Must have very good experience of documentation, quality management and testing. Job based at Baroda.

Job Purpose : (what contribution is this position supposed to make in business?) The QMS and EU MDR Compliance Executive is responsible for ensuring compliance with ISO 13485, EU MDR (Regulation EU 2017/745), and other applicable quality and regulatory requirements. This role will support the development, implementation, and maintenance of the Quality Management System (QMS), oversee documentation control, conduct internal audits, and support regulatory submissions and audits as required. Key Deliverables/Responsibilities of this position 1- Quality Management System (QMS): Maintain and improve the ISO 9001:2015 / ISO 13485:2016-compliant Quality Management System. Ensure effective implementation of quality procedures and policies. Manage document control, change control, CAPA, non-conformances, and risk management processes. Coordinate internal audits, supplier audits, and management reviews. Monitor key quality metrics and report quality performance. 2- EU MDR Compliance: Ensure ongoing compliance with EU Medical Device Regulation (EU MDR 2017/745). Support the preparation and maintenance of technical documentation in accordance with Annex II and III of EU MDR. Work with cross-functional teams to ensure products meet General Safety and Performance Requirements (GSPRs). Coordinate with Notified Bodies during audits and technical file reviews. Support UDI, PMS (Post-Market Surveillance), and vigilance processes under EU MDR. 3- Regulatory Affairs: Assist with regulatory submissions and CE marking activities. Maintain up-to-date knowledge of applicable regulatory requirements and changes. Liaise with regulatory consultants, Notified Bodies, and competent authorities as needed. 4- Assist in compilation of technical files & related documentation: • Preclinical studies • Usability engineering as per EN 62366 • Risk management reports – as per 14971 • Clinical evaluation reports – as per MEDDEV 2.7.1 5- Knowledge of EU Regulation (EU) 2017/745, to prepare & compile: • Post Market Clinical Follow up (PMCF) • It is the requirement of EU MDR, Annex XIV • PMCF shall be understood to be a continuous process that updates the clinical evaluation • Post Market Surveillance (PMS) • It is the requirement of EU MDR • Labelling requirements • It Is related to Labeling requirements of medical devices as per EU MDR. Means candidate must understand the related requirements & standard knowledge. • UDI requirement. • It Is also related to Labeling requirements of medical devices as per EU MDR. UDI is the new requirement which must be present in CE certified product labels. • Unique device Identification. 6- Preparation and amendments of quality system procedures 7- Assist in external audits & internal audits 8- Knowledge of Quality Control Operations & Problem Solving & Continuous Improvement Required Technical Skills: Knowledge of ISO 13485 & Regulation (EU) 2017/745 Required Behavioural Attributes: Good learner Interactive with team Good communication skills

Job Title: Asst. Manager / Manager Quality Control Department: Quality Control Number of Opening – 1 Nos Experience Required: 5 to 10 Years Location: At Factory – Daheli, Valsad, Gujarat Reports To: Quality Head Job Purpose: To ensure that all raw materials, in-process production, and finished goods meet the required quality standards. The QC Manager is responsible for implementing and maintaining quality systems, reducing rejections, and ensuring customer satisfaction through consistent product quality. Key Responsibilities: 1. Quality System Implementation: Develop, implement, and maintain quality control procedures and inspection plans. Establish and monitor quality parameters (bursting strength, GSM, moisture, compression, dimensions, etc.). Ensure compliance with internal standards and customer specifications. 2. Incoming Material Inspection: Inspect incoming raw materials (kraft paper, adhesives, inks, etc.) as per quality norms. Approve or reject materials based on test reports. Coordinate with purchase and stores for rejected material replacement. 3. In-Process Quality Control: Monitor and control quality during various stages of production (corrugation, printing, slotting, die-cutting, pasting). Ensure process control measures are followed by operators and supervisors. Conduct root cause analysis and implement corrective/preventive actions for defects. 4. Finished Goods Inspection: Conduct final inspection of finished goods before dispatch. Ensure packing, labeling, and quantity checks as per customer requirement. Approve finished goods for dispatch only after quality clearance. 5. Customer Complaint Handling: Investigate quality complaints, identify root causes, and implement corrective actions. Maintain complaint register and coordinate with Sales and Production teams for resolution. 6. Team Management & Training: Lead and train the QC team (executives, inspectors, testers). Conduct internal audits and quality awareness programs for staff. 7. Documentation & Reporting: Maintain records of all inspections, test reports, rejections, and corrective actions. Generate daily, weekly, and monthly QC reports and share with management. Prepare data for audits (internal/external or customer-based). Key Result Areas (KRAs): Reduction in rejection and rework percentage. On-time inspection and quality clearance. Compliance to customer quality standards and zero complaints. Implementation of QC SOPs and training effectiveness. Qualifications & Skills: B.Sc. / B.Tech / Diploma in Paper Technology / Printing / Mechanical / Industrial Engineering. 5–10 years of QC experience in the packaging/corrugated box industry. Sound knowledge of testing equipment (bursting strength tester, GSM tester, moisture meter, etc.). Strong analytical, documentation, and communication skills. Familiarity with ISO, 5S, and other quality systems is a plus. Kindly apply - hr@vidhishapaper.com

Job Summary: The Documentation Engineer will be a key member of the execution team, responsible for managing and maintaining documentation related to installation, commissioning, and qualification of process and utility equipment. This role is ideal for mid-level professionals (3-5 years of experience) looking to advance their expertise in installation qualification (IQ), operational qualification (OQ), and performance qualification (PQ) for equipment used in pharmaceutical, chemical, and food processing industries. Key Responsibilities: Prepare and maintain IQ, OQ, PQ documentation for micronizing mills, containment isolators, bulk handling systems, and fluid bed dryers. Ensure documentation aligns with industry GMP, FDA, and other regulatory standards for equipment validation. Support audits by maintaining structured records for qualification processes on day to day basis. Assist in the installation, commissioning, and qualification of high-containment and powder-handling equipment. Coordinate with internal teams and vendors for proper setup and troubleshooting of process equipment, Provide technical support for operation and maintenance of containment solutions. Work with senior engineers to troubleshoot automation systems, PLCs, and electrical components. Analyze equipment efficiency and contribute to continuous improvement initiatives. Maintain electrical consumption reports to optimize operational performance.

Knowledge in fabrication and Preferred CSWIP3.1certificate holder NDT –ASNT level- II (VT,PT,UT,MPT &RT)preferred Knowledge in inspection of sampling plan IS 2500 /ISO 2859 Knowledge in WPS, WPQT& PQR Fabrication of carbon steel and Stainless Steel

knowledge in WPS, WPQT& PQR Fabrication of carbon steel and Stainless Steel. Knowledge in fabrication and Preferred CSWIP3.1certificate holder NDT –ASNT level- II (VT,PT,UT,MPT &RT)preferred Knowledge in inspection of sampling plan IS 2500 /ISO 2859

Key Responsibilities: 1. Quality Management System (QMS): Establish, implement, and maintain ISO 9001, ISO 14001, ISO 45001, and ISO 50001-compliant QMS. Ensure documentation, internal audits, CAPA, and system updates are regularly reviewed and improved. Ensure compliance with BIS, IEC, and MNRE guidelines. 2. Quality Assurance & Control: Define quality parameters and inspection plans for raw materials (glass, EVA, backsheet, cells), in-process components, and finished modules. Supervise QA/QC operations across all stages incoming material inspection, in-line process checks, and final testing. Manage electroluminescence (EL), IV testing, Hi-pot, insulation resistance (IR), and thermal cycle evaluations. 3. Team Management: Lead and mentor a team of quality engineers, inspectors, and lab technicians. Develop training programs to ensure quality competency at all levels. 4. Vendor Quality Management: Evaluate and approve suppliers based on quality systems, certifications, and performance. Perform supplier audits and support corrective actions for non-conforming materials. 5. Product Certifications & Audit Readiness: Manage third-party certifications (IEC 61215, 61730, BIS, CE, UL, etc.). Coordinate with external labs and certification bodies for new product certifications. Ensure readiness for customer and third-party audits. 6. Root Cause Analysis & Continuous Improvement: Lead investigations into product and process non-conformities. Use tools like 8D, Fishbone, FMEA, and 5 Why analysis for root cause and corrective actions. Implement Lean Six Sigma practices to enhance yield and reduce defects. 7. Customer Interface: Handle customer complaints and quality-related feedback. Support pre-shipment inspections and customer visits. Provide technical documentation and assurance reports.

You will be part of the Smart Infrastructure Division at Siemens Ltd., a leading global supplier of products, systems, solutions, and services for the efficient and intelligent transmission and distribution of electrical power. As a trusted partner in developing and extending a reliable power infrastructure, you will play a crucial role in meeting industry needs and ensuring portfolio efficiency. Your responsibilities will include: - Monthly production planning, prioritizing jobs, executing the production plan, and monitoring key performance indicators (KPIs) such as delivery reliability, extra costs, and overall equipment effectiveness. - Balancing manpower and machine capacity, and planning the deployment of resources for each shift. - Ensuring timely availability of tools, materials, and other requirements to support production execution. - Supporting new developments, improvements, and qualifying new tools, machines, and processes. - Maintaining production records, incentive calculations, and ISO documentation. - Implementing 5S and EHS practices in the department, providing training and development to workmen, focusing on quality improvement, cost reduction, capacity balancing, and safety enhancements. - Working in all three shifts as necessary. You should have: - A Diploma/Degree in Plastics Technology with 3-5 years of relevant experience. - Proficiency in Injection Molding of Engineering Thermoplastic & Thermoset materials processing. - Knowledge of molding tools and tool repairs. - Understanding of EHS and quality standards. Siemens is a diverse community of over 379,000 individuals working together to build the future across 200 countries. We value equality and encourage applications that represent the diversity of the communities we serve. Employment decisions at Siemens are made based on qualifications, merit, and business needs. If you bring curiosity and creativity, join us in shaping tomorrow.,

Independently handling All Quality aspects Must handled IATF & ISO Audits Making all required Documents Maintaining Records Provide Training & Development QMS Customer Handling Fire, Safety, Plant, Manpower, etc. Take Internal & External Audits Required Candidate profile Preferring Candidates who had handled entire quality related One from Aluminum Alloys manufacturing and other from HPDC manufacturing.

1. ensure timely submission of invoice 2. ensure timely collection of supply payment 3. Supporting PM for Liquidation of Hazira Project Inventories, Common Stock & Finished Goods at the earliest to generate revenues 4. Establish Payment start date with customer 5. Supporting PM in Project Completion as per Target dates 6. USOD management of Project Supplies under main contract 7. Preparation and submission of Monthly Progress report to the client 8. Preparation of project & financial report to be presented to management 9. Maintaining the ISO documents up to date 10. Managing SAP activities forProjects, including open PRs and POs status Knowledge of following - 1. Project Management 2. GST (Taxes & duties) 3. Invoicing and finance management 4. SAP idea for PP & MM module 5. Well versed with MS Office - word, excel, PPT 6. Knowledge of scheduling will be added benefit

1)Develop and implement QA procedure 2)Conduct audits and inspections 3)Analyze defects and quality data 4)Collaborate with cross-functional teams 5)Ensure compliance with standards 6)Support continuous improvement effort

Hiring for Asst. Manager- Manufacturing & Health & Safety 6-8 Years Location:Bengaluru Interview-F2F Rotational Shift 5 Days working This role will require you to actively contribute and support OH&S, Quality, Security, Planning and Improvement activities, co-ordinate and manage all aspects of Production planning, People management, Maintenance, Health & Safety. Required technical skills: Experience in managing a Quality Assurance program to the accreditation of ISO 9001 Be able to write and implement quality procedures to ensure effective operations Be able to identify issues and implement improvements to ensure quality Exceptional written and verbal communication skills • Advanced level PC Skills encompassing Microsoft packages • Ability to understand company products • Strong leadership skills and the ability to successfully manage a team • Ability to liaise effectively with clientele and provide production related advice • Self motivation and the ability to work as part of a team. • Ability to plan, coordinate and strategise to meet business plans Ability to interpret and adhere to financial budgets Organise and motivate staff within your department to operate in a manner that provides the highest possible level of performance/service to the customers maximising output whilst minimising cost Provide leadership to the shop floor team and oversee activities to ensure all standard work practices are followed Responsible for planning and scheduling of operation resources to ensure that business requirements are achieved under the most cost effective manner. Responsible for setting and delegation of activities for all operations staff and workmen. Ensure maintenance of machines Preventative Maintenance Programs are in place as required to support operation requirements. Ensure all machines are running at the highest possible efficiency and safety levels. Ensure all Operations consumable supplies are purchased and are available. Generate and maintain accurate records and reports as required by the quality system or as defined by the business needs. Prepare budget for Operations and forecast expense and capex required Interested candidates can share your CV to sindhura@delighthr.com with below details: Total Years of Experience: Relevant Experience: Current CTC: Expected CTC: Notice Period: Current location in Bengaluru:

Roles and Responsibilities Role HOD Electrical & Mechanical Maintenance Execution & monitor of maintenance Process Objectives, timely achievement and action plan if target is not meet Prepare preventive & predictive maintenance plan & execution Prepare daily task to the members from predictive maintenance check points and close the non-conformities Man management & handling and allot daily work schedules and effective closures Maintain & monitor critical spares management & ensure availability Monitor minimum & maximum spare management Collect data from preventive maintenance and arrange spares w.r.t. various department. Maintenance vendor development for fabrication and machining activities Update preventive maintenance plan based on root cause analysis Maintain history of all machine and equipment to monitor machine efficiency Execution of customer specific requirements, product safety and product quality w.r.t. all customers Identify resource requirements & fulfillment w.r.t. maintenance processes with co-ordination with management Execution, monitor & maintain error proofing devices predictive maintenance Prepare preventive maintenance plans are monitored on a daily, weekly, monthly, quarterly, six months & yearly for maintain healthy life of equipments. Planning and undertaking Schedule and undertake periodic maintenance along with diagnosing for faults on all electrical & mechanical equipment, components, and installations Provide prompt response to inquiries whenever there is a breakdown, and resolve the issue as quickly as possible. Monitor MTTR, MTBF and plant performance w.r.t. all equipment’s Execute POKA YOKE and continual improvement projects. Remove waste and Constraints from the maintenance process to improve efficiencies and enhance productivity of equipment’s Ensure compliance is laid down and systems and procedures are in line with Quality management system. Mentoring , reporting and documenting records w.r.t. Quality management system Adequate utilization of resources & Identify resource requirements w.r.t department and take approval from the higher authorities Responsible for Rejection, process deviation and effective control of rejection, monitoring and measurement of equipment performance. To analyze the data, decide corrective & preventive action and implement the same with approval from higher authorities w.r.t customer complaints and audit non conformity Execute & address the surveillance audits, Customers audits and internal audits and closure of potential NC’s w.r.t. maintenance process Responsible for Risk Analysis in department to achieve Targets

Roles and Responsibilities Oversee HMC programming activities for complex machining operations. Ensure compliance with ISO documentation standards for machining processes and NPD parts. Collaborate with cross-functional teams to identify process improvements and implement changes using Siemens controls (S7) or Fanuc control systems. Develop and maintain technical documentation, including engineering drawings, tool selection, fixtures, CMM reports. Manage new product development projects from concept to production, ensuring timely delivery of high-quality products. Can handle independently all the development parts from Sample stage to still approve from customers. Need to work on Machines Practically to get done sample development parts. Must have knowledge of all CNC & Conventional Machines process & Programming.

Role & responsibilities * Creating and maintaining quality control processes, policies, and standards. * Tracking and analyzing quality control data to identify trends, root causes, and areas for improvement. * Supervising and mentoring quality control personnel, providing guidance and support. Working with various teams, departments, and stakeholders to align quality control efforts with business objectives. * Identifying opportunities to enhance product quality and production efficiency. * Maintaining accurate and up-to-date quality control documentation. Preferred candidate profile 10-15 years of experience in the valves/fittings industry, preferably with ADNOC, ARAMCO, KOC, etc.

Responsibilities: * Conduct quality inspections at incoming, line, final stages using ISO documentation. * Support root cause analysis for defects and assist in corrective & preventive actions Food allowance Travel allowance Over time allowance Provident fund

Meet stage wise quality standards and galvanising standards. Key duties include inspecting raw materials, monitoring in-process fabrication (cutting, bending, welding, powder coating), and performing final product checks. Required Candidate profile The engineer must read engineering drawings, use measurement tools like Vernier calipers, micrometers, and coating thickness gauges, &maintain clear QC documentation and reports as per ISO 9001.

1. Looking for Graduate Engineer with 6-8 years of experience in QA department of an engineering or FMCG company. 2. Shall be well versed with ISO 9001, ISO45001 and willing to take responsibility for setting up the QMS. 3.Person possessing knowledge about TQM with experience in implementing POKA-YOKE is preferred. 4. Should have experience of documentation of audit process.

About the Company Boon Management Consultants PVT. LTD (BMCPL): Boon Management Consultants Pvt. Ltd. (BMCPL) is a consultancy organization (Incorporated in 2005) that specializes in providing services for improvement of systems including capacity building, implementation of lean tools, ZED Consultancy etc. BMCPL is providing consultancy and training services to its clients all over India through our consultants located in pan India. Besides many private and services sector clients , we are providing services to government/semi-government organizations. Some of our government clients are 33 ZILLA PARISHADS, RURAL DEVELOPMENT DEPARTMENT- GOVERNMENT OF MAHARASHTRA, OFFICE OF GOVERNOR OF MAHARASHTRA, etc. For the ZILLA parishad project done by us, RURAL DEVELOPMENT DEPARTMENT (RDD) has won National Award. Ministry of MSME, GOI (MoMSME), has selected Quality Council of India (QCI) which is an autonomous body under Govt. of India for implementing and Monitoring ZED and MCLS scheme across India. QCI has selected BMCPL as a ZED consulting organization and also for MCLS consulting organization for pan India operations. Job description – Senior Consultant (Office) Remuneration :- 35,000 to 50,000 per month + Performance incentives Job Type: Full-time, Permanent Education: ( Any of the following) 1. Any Gradutate with knowledge of ISO consultancy/ISO Auditing/ Quality Related fields 2. Any Graduate with minimum 8 years industrial experience in manufacturing. 3. Any Diploma with 10 years industrial experience in manufacturing 4. Any BE/BTech with 8 years industrial experience in manufacturing 5. Knowledge of ISO &/or Lean tools implementation/Documentation/ Consultancy/Systems/Quality related fields shall get additional weightage 6. Probation: - You shall be on a probation for a period of Three (3) months. After probation, depending upon your performance you can get confirmation letter or your probation can be extended/terminated. 7. Training : - a. You shall be trained and guided to become a national level ZED consultant after which you shall be able to take up ZED Consultancy projects. b. If you are eligible, then you shall be trained and guided to become a national level MCLS Consultant after which you shall be able to provide MCLS Consultancy. c. You shall be given training on online QC checks, assessments and all related works which are required for you to handle the required processes independently. d. You shall be given training on ISO 9001/14001/45001 implementation and assessment. e. You shall be trained and guided on ISO 17021 after which you shall accompany our team in witness/office assessments as required by the company. You shall be trained thoroughly before being asked to face audits independently. f. You shall be trained on handling different ZED/MCLS/ISO operations depending on your eligibility and requirement of the company after which you would be required to give online guidance/ trainings to our team pan India. g. Depending upon your performance, dedication, ability to build and handle a team you may be offered a chance to head an operation and earn extra monitoring incentive as per company norms. 8. Roles and Responsibilities:- a. You shall be required to come to our office 6 days a week( Monday to Saturday). b. You shall be required to do a minimum of 5 online assessments per day (100 per month), which can be done from office or home. One assessment requires 15 to 20 minutes on average. c. You shall be required to provide online support/ training to our Pan India team on the topics related to ZED/MCLS/ISO for which we shall train you adequately. d. Once you get the required certifications, To enhance your implementation skills and keep them updated our company may give you field consultancy work for few days in a month. For doing field work you shall be given additional incentive depending upon your efficiency and quality of work. In rare cases, If outstation travel would be required then extra travel and stay accommodation shall be provided by the company. e. You shall be required to prepare necessary MIS and submit them to director weekly/monthly depending on the importance of the operation. f. TDS shall be deducted as applicable for which you shall receive proof from the company and can claim from GOI at the end of the year through your CA. 9. RETAINER-SHIP INCENTIVE shall be given to SENIOR CONSULTANT depending upon his ZED/MCLS/ISO performance and points achieved by him as per the details given in annexure. Perks and Benefits: 1. Cell phone reimbursement 2. Internet reimbursement 3. Performance incentives after field works starts Place of Posting: At our office located in Ithink business park by Lodha, opposite to Xperia mall, Dombivali East - 421204 Schedule : Monday to Saturday

responsible for MR function for ISO certification (QMS,EMS & OHSAS) responsible for ISO documentation responsible for 5 S implementation Will do safety audit of factory provide safety training and conduct mock drill Required Candidate profile Min 5 years in above profile. In-depth knowledge of ISO 9001, 14001, and 45001 standards ISO Lead Auditor (preferred)(Graduation/MSW/RLI/CLI + Auditor/Lead auditor certification is a added advantage) Perks and benefits Food & Accommodation

Hiring for QMS Manager | Dhaturi | Sonipat | Steel Industry Exp.- 8-9yrs Salary - 8-10lpa JD will share Candidate must have good experience of sheet metal industry Interested candidate contact on - 8222822052

Job description / responsibilities / work profile: Quality assurance for the products manufactured by the company Will be responsible for quality claims & warranty, machine traceability. Previous experience of ISO 9001~2015 & handle entire documentation requirement for ISO 9001~2015 certification. Liaison with external agencies (certification body, consultants) on matters pertaining to QMS. Ensuring and facilitating supplier audit, tool audit, 5S audits etc Responsible for maintaining calibration of measuring instruments/equipments. Experience in handling customer inspection/DAP/ECN. Responsible for Process achievement (KPI) in QA/QC Department. Contribution in machine trials & proving with R&R study, Cp & Cpk calculations. Problem solving with 8D methods. Knowledge about TQM, QMS, SPC/SQC ,7QC Tools, CAPA & inspection sampling methods etc. Lead or participate in quality-related projects, such as Kaizen activities and Poka yoke. Skills required: Excellent communication skills. Excellent command over English/ knowledge on Kannada and Hindi is a plus. Expertise on Ms office/ excel is a must. Ability to work independently and in a team environment.

Roles and Responsibilities Develop and implement quality management systems (QMS) according to ISO standards, ensuring compliance with customer requirements. Conduct internal audits, identify areas for improvement, and implement corrective actions to maintain high-quality products and services. Collaborate with cross-functional teams to develop process documentation, including PPAPs, technical specifications, and quality manuals. Ensure timely completion of customer audits by providing necessary documents and support. Maintain accurate records of QMS activities, such as audit reports, corrective action plans, and training records. Desired Candidate Profile 6-10 years of experience in a similar role within the automotive industry or related field. Strong understanding of IATF 16949 standard; certification preferred. Experience with TS/ISO documentation processes; ability to create clear documentation using MS Office tools (Word). Excellent communication skills; ability to work effectively with diverse stakeholders at all levels.

Responsibilities: * Lead process audits, supplier evaluations, and implement CAPA strategies * Ensure compliance with ISO standards through documentation. * Collaborate with cross-functional teams on process improvements.

Perform inspections of 3D printed and assembled parts,ensuring quality standards.Work with production/design teams to resolve issues,ensure specifications are met.Basic 3D printing knowledge, measuring tools handling,QA documentation skills required Food allowance Provident fund Health insurance Annual bonus