13 Interferometry Jobs

Scientist - Bioanalysis (Protein-Protein Interactions) Department - NBE Qualification : Masters Experience : 1 to 5 years must have experience in protein protein interaction studies using relevant techniques like SPR, ELISA etc. Job Desciription Performing protein-protein interaction studies using Surface Plasmon Resonance, Biolayer Interferometry and ELISA techniques. Good understanding in performing quantitation and kinetic experiments for small and large molecules using Biacore and Octet. Actively involved in setting up new processes, innovation, and new platform development. Planning, designing, execution, troubleshooting and timely completion of experiments / projects. Data analysis, interpretation of results and presentation in client or internal meetings. Involved in discussions on strategies, risks and operational challenges related to projects. Discuss experiment data / analytical results on regular basis with the supervisor. Periodic maintenance of responsible lab instruments. Contribute towards good documentation practices such as contemporaneous recording of data in the lab notebook / Electronic lab notebook and completion of experiments as per QA requirement. Behavior Skills Required Excellent communication skills – written, verbal and presentation skills Flexibility and ability to thrive in an efficient, highly interactive team environment Candidates with relevant experience may reach out to pranavgayal@aurigeneservices.com for further discussions.

University: Delft University of Technology (TU Delft) Country: Netherlands Deadline: Rolling Fields: Geodesy, Geophysics, Remote Sensing, Civil Engineering, Applied Mathematics The Faculty of Civil Engineering and Geosciences at Delft University of Technology (TU Delft) invites applications for a full-time, four-year PhD position in the area of Geodesy and Satellite Radar Interferometry (InSAR). This research will focus on advancing InSAR methodologies to achieve millimeter-level precision in surface deformation measurements, thereby enhancing our understanding of both natural and human-induced processes such as subsidence, seismic activity, and infrastructure stability. Key Responsibilities – Develop and refine InSAR techniques for monitoring surface deformation. – Analyze extensive satellite datasets from missions including Sentinel-1 and NISAR. – Integrate geodetic, physical, and mathematical models to interpret InSAR data. – Collaborate with a multidisciplinary team specializing in geodesy, remote sensing, and geophysics. – Disseminate research findings through peer-reviewed publications and international conferences. Requirements – MSc degree in Geodesy, (Geo)Physics, Mathematics, or a closely related discipline. – Strong analytical and quantitative skills, with a solid background in physical modeling and/or signal processing. – Demonstrated academic writing ability and effective communication skills. – Self-motivated, creative, and curious, with a keen interest in Earth observation and scientific research. – Programming experience in Python is advantageous. What The Position Offers – A four-year, full-time PhD appointment at a leading technical university. – Access to advanced facilities, data, and computing resources. – A supportive, international, and collaborative research environment. – Opportunities for professional growth and academic training. – Competitive salary and benefits as per the Dutch Collective Labour Agreement for Universities (CAO-NU), with monthly salary ranging from €2901 to €3707. Application Procedure Applicants should submit the following documents as a single PDF file: – Cover letter detailing motivation and suitability for the position. – Curriculum Vitae (including publications, if applicable). – Copies of BSc and MSc academic transcripts. – Contact information for two academic referees. – (Optional) Sample of academic writing, such as an MSc thesis or research paper. Applications are reviewed on a rolling basis. Early submission is encouraged. For further information or to submit your application, please contact Professor Ramon Hanssen at r.f.hanssen@tudelft.nl. Please note: This position has been advertised by Professor Ramon Hanssen on LinkedIn. Get the latest openings in your field and preferred country—straight to your email inbox. Sign up now for 14 days free: https://phdfinder.com/position-alert-service/ We’re an independent team helping students find opportunities. Found this opportunity helpful? Support us with a coffee! Also See PhD and Postdoctoral Positions in Remote Sensing of the Arctic PhD or Postdoctoral Research Opportunity in Remote Sensing & Arctic Hydrology PhD Position in Wide Area Protection and Control Applications for Power Systems Fully Funded Graduate Study Opportunities in Computational Geophysics Fully Funded PhD Positions in Sustainable Energy Systems and Ecosystem Monitoring

Job Description: We are seeking a highly skilled Mechanical Engineer with extensive experience in mechanical design and strong analytical and problem-solving abilities. We value innovative thinkers who can challenge conventional practices and drive progress. What’s in it for you? Work in a dynamic, high-tech environment with cutting-edge technology. Exposure to diverse technologies and opportunities for self-development. About Our Group: This Team working will be working on developing Optical Inspection and Metrology systems. Overall Team comprises of mechanical, electrical, electronics and software functions and also, we have a proto-lab for concept and feasibility approach. Work with global team in Santa Clara, Israel, Taiwan and world-wide field customers. Team was formed last 5+ years, and Total India team size is 25+. Team has many accolades and won many teams of the quarter awards. Motto of team is: ‘Alone we can do so little; together we can do so much.’ Key Responsibilities: Seasoned Mechanical Engineer who is aware of general system design, Precision engineering, optical systems- design methodology, engineering, safety, and qualification and System Engineering mindset) Design mechanical components, including structural elements, pneumatic systems, vacuum systems, manual and motorized mechanisms, filtration systems, and cooling systems for clean room environments. Conduct CAE simulations and analyses for design validation and troubleshooting. Create detailed drawings, define fabrication processes, materials, and finish standards with comprehensive GD&T, and perform complex tolerance analyses. Plan and execute experiments to validate designs. Lead the mechanical aspects of the development process, present design reviews, and collaborate with cross-functional teams, including project management, product manufacturing, field support, and suppliers. Qualifications: B.Tech. Mechanical Engineering 8-12 years of experience. Job requires knowledge of system engineering, Optical and metrology systems, motion mechanics, high precision motion stages, and stage subsystems (chuck, substrates/wafer handling, interferometry, metrology, …) Structural FEA as a must. Flow and thermal good to have. Proficient in first order mechanical engineering calculations for high predictability of design performance. Mechanical engineering experience in component selection, building, testing, troubleshooting, and releasing semiconductor or other similar scale capital equipment. Knowledge in SEMI S2/S8/S14, NFPA 79, F47, CE, EMI/EMC safety standards In-depth knowledge of 3D CAD design tools (i.e., Inventor) and 2D CAD drawing tools not limited to Nx, Inventor, AutoCAD, etc. Familiar with machined parts fabrication and designing for cost effective solutions. Working knowledge of materials & components used in semiconductor wafer manufacturing equipment, materials characterization methods, and failure analysis of materials/system. Experience with supporting manufacturing and service organizations through training, documentation (procedures, OMS, BKMs, etc.), and troubleshooting. Proficiency in data analysis software like Excel, or equivalent Strong time management skills with an emphasis on managing multiple projects simultaneously. Strong communications skills, organizational skills and sense of collaboration. Drive and desire to thrive in a start-up like environment. Qualifications Education: Bachelor's Degree Skills Certifications: Languages: Years of Experience: 4 - 7 Years Work Experience: Additional Information Shift: Day (India) Travel: Yes, 10% of the Time Relocation Eligible: Yes Applied Materials is an Equal Opportunity Employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

OPTICS DESIGNER Location Derabassi - Punjab, India Pacesetting. Passionate. Together. HELLA, one of the leading automotive suppliers worldwide, has shaped the industry with innovative lighting systems and vehicle electronics. In addition, the company is one of the most important partners of the aftermarket and independent workshops. What motivates us: Shaping the mobility of tomorrow and fostering the central market trends such as autonomous driving, efficiency and electrification, connectivity and digitization as well as individualization. Every day, 36,000 employees worldwide are committed to this with passion, know-how and innovative strength. YOUR TASKS Design optical systems and components to meet specified requirements by understanding and interpreting customer and project needs. Lead in the development of optical prototypes, perform optical simulations and measurements to verify design performance. Develop optical models with the use of state-of-art software tools such as ZEMAX, FRED, or LightTools. Create optical specifications, tolerances, and manufacturing instructions for new optical products. Collaborate with cross-functional teams including mechanical engineering, manufacturing, and supplier management to ensure optical designs can be produced efficiently and meet quality standards. Provide technical documentation including design review presentations, test reports, and manufacturing instructions. Verify the quality of optical elements and systems with the help of optical metrology techniques including interferometry, spectrophotometry, and imaging metrology. Support the troubleshooting of optical systems in production and post-production, providing technical guidance and expertise. Keep up-to-date with the latest advancements in optics design methodologies, tools, and market trends to improve design capabilities. Execute risk assessments and devise design solutions to mitigate potential product or process issues. Perform design analysis including performance, risk, cost, and manufacturability with appropriate justifications for design choices. Adhere to all safety and compliance procedures in the design, testing, and production phases. YOUR QUALIFICATIONS Oversee and participate in optical testing, calibration, and validation activities. Provide optical design training and mentorship to junior engineers and team members. Participate and contribute to design reviews and improvement meetings. Ensure proper storage and handling of optical components to maintain quality and prevent damage. Assist in procurement of optical components, liaising with suppliers to get the best quality and cost-effective materials. Provide technical support for sales and marketing, such as providing necessary data and documentation for technical presentations or product briefs. Help in troubleshooting and resolving any optical issues identified by customers in a timely manner. Take the opportunity to reveal your potential within a global, family-run company that offers you the best possible conditions for progressing in your career. Please send us your application through our careers portal, citing reference number req16613. HELLA India Lighting Ltd. Neha Saini Derabassi - Punjab

Location Derabassi - Punjab, India Pacesetting. Passionate. Together. HELLA, one of the leading automotive suppliers worldwide, has shaped the industry with innovative lighting systems and vehicle electronics. In addition, the company is one of the most important partners of the aftermarket and independent workshops. What motivates us: Shaping the mobility of tomorrow and fostering the central market trends such as autonomous driving, efficiency and electrification, connectivity and digitization as well as individualization. Every day, 36,000 employees worldwide are committed to this with passion, know-how and innovative strength. YOUR TASKS Design optical systems and components to meet specified requirements by understanding and interpreting customer and project needs. Lead in the development of optical prototypes, perform optical simulations and measurements to verify design performance. Develop optical models with the use of state-of-art software tools such as ZEMAX, FRED, or LightTools. Create optical specifications, tolerances, and manufacturing instructions for new optical products. Collaborate with cross-functional teams including mechanical engineering, manufacturing, and supplier management to ensure optical designs can be produced efficiently and meet quality standards. Provide technical documentation including design review presentations, test reports, and manufacturing instructions. Verify the quality of optical elements and systems with the help of optical metrology techniques including interferometry, spectrophotometry, and imaging metrology. Support the troubleshooting of optical systems in production and post-production, providing technical guidance and expertise. Keep up-to-date with the latest advancements in optics design methodologies, tools, and market trends to improve design capabilities. Execute risk assessments and devise design solutions to mitigate potential product or process issues. Perform design analysis including performance, risk, cost, and manufacturability with appropriate justifications for design choices. Adhere to all safety and compliance procedures in the design, testing, and production phases. Your Qualifications Oversee and participate in optical testing, calibration, and validation activities. Provide optical design training and mentorship to junior engineers and team members. Participate and contribute to design reviews and improvement meetings. Ensure proper storage and handling of optical components to maintain quality and prevent damage. Assist in procurement of optical components, liaising with suppliers to get the best quality and cost-effective materials. Provide technical support for sales and marketing, such as providing necessary data and documentation for technical presentations or product briefs. Help in troubleshooting and resolving any optical issues identified by customers in a timely manner. Take the opportunity to reveal your potential within a global, family-run company that offers you the best possible conditions for progressing in your career. Please send us your application through our careers portal, citing reference number req16613. HELLA India Lighting Ltd. Neha Saini Derabassi - Punjab

Who We Are Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips – the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world – like AI and IoT. If you want to work beyond the cutting-edge, continuously pushing the boundaries of science and engineering to make possible the next generations of technology, join us to Make Possible® a Better Future. What We Offer Location: Bangalore,IND At Applied, we prioritize the well-being of you and your family and encourage you to bring your best self to work. Your happiness, health, and resiliency are at the core of our benefits and wellness programs. Our robust total rewards package makes it easier to take care of your whole self and your whole family. We’re committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits. You’ll also benefit from a supportive work culture that encourages you to learn, develop and grow your career as you take on challenges and drive innovative solutions for our customers. We empower our team to push the boundaries of what is possible—while learning every day in a supportive leading global company. Visit our Careers website to learn more about careers at Applied. Job Description: We are seeking a highly skilled Mechanical Engineer with extensive experience in mechanical design and strong analytical and problem-solving abilities. We value innovative thinkers who can challenge conventional practices and drive progress. What’s in it for you? Work in a dynamic, high-tech environment with cutting-edge technology. Exposure to diverse technologies and opportunities for self-development. About Our Group This Team working will be working on developing Optical Inspection and Metrology systems. Overall Team comprises of mechanical, electrical, electronics and software functions and also, we have a proto-lab for concept and feasibility approach. Work with global team in Santa Clara, Israel, Taiwan and world-wide field customers. Team was formed last 5+ years, and Total India team size is 25+. Team has many accolades and won many teams of the quarter awards. Motto of team is: ‘Alone we can do so little; together we can do so much.’ Key Responsibilities Seasoned Mechanical Engineer who is aware of general system design, Precision engineering, optical systems- design methodology, engineering, safety, and qualification and System Engineering mindset) Design mechanical components, including structural elements, pneumatic systems, vacuum systems, manual and motorized mechanisms, filtration systems, and cooling systems for clean room environments. Conduct CAE simulations and analyses for design validation and troubleshooting. Create detailed drawings, define fabrication processes, materials, and finish standards with comprehensive GD&T, and perform complex tolerance analyses. Plan and execute experiments to validate designs. Lead the mechanical aspects of the development process, present design reviews, and collaborate with cross-functional teams, including project management, product manufacturing, field support, and suppliers. Qualifications B.Tech. Mechanical Engineering 8-12 years of experience. Job requires knowledge of system engineering, Optical and metrology systems, motion mechanics, high precision motion stages, and stage subsystems (chuck, substrates/wafer handling, interferometry, metrology, …) Structural FEA as a must. Flow and thermal good to have. Proficient in first order mechanical engineering calculations for high predictability of design performance. Mechanical engineering experience in component selection, building, testing, troubleshooting, and releasing semiconductor or other similar scale capital equipment. Knowledge in SEMI S2/S8/S14, NFPA 79, F47, CE, EMI/EMC safety standards In-depth knowledge of 3D CAD design tools (i.e., Inventor) and 2D CAD drawing tools not limited to Nx, Inventor, AutoCAD, etc. Familiar with machined parts fabrication and designing for cost effective solutions. Working knowledge of materials & components used in semiconductor wafer manufacturing equipment, materials characterization methods, and failure analysis of materials/system. Experience with supporting manufacturing and service organizations through training, documentation (procedures, OMS, BKMs, etc.), and troubleshooting. Proficiency in data analysis software like Excel, or equivalent Strong time management skills with an emphasis on managing multiple projects simultaneously. Strong communications skills, organizational skills and sense of collaboration. Drive and desire to thrive in a start-up like environment. Additional Information Time Type: Full time Employee Type Assignee / Regular Travel Yes, 10% of the Time Relocation Eligible: Yes Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

University: Delft University of Technology (TU Delft) Country: Netherlands Deadline: 2025-07-31 Fields: Civil Engineering, Computational Science, Mechanical Engineering, Applied Mathematics, Environmental Engineering The Department of Civil Engineering and Geosciences at Delft University of Technology (TU Delft) invites applications for a PhD position focused on the development of scalable solvers for multiscale, multiphysics, and multifidelity simulations in offshore floating solar farms. The successful candidate will join the CMOE group and contribute to the DigiOcean4Solar project, advancing scientific computing in the field of renewable energy. Key Responsibilities – Develop and analyze multiscale models for wind-wave-structure interaction in offshore floating solar farms. – Design and implement scalable solvers for large-scale high-performance computing applications. – Assess farm-scale effects in floating solar installations. Requirements – Strong background in scientific computing, numerical partial differential equations, and finite element methods. – Proficiency in programming languages such as Julia, Python, or C++, and experience with HPC libraries. – Experience or interest in multiphysics or multiscale simulation methods. – Demonstrated enthusiasm for renewable energy and/or offshore engineering applications. Benefits – Opportunity to advance scientific computing for emerging renewable energy technologies. – Collaborative research environment with international research institutions. – Membership in the CMOE research group at TU Delft. Application Procedure Interested candidates are invited to apply online at https://lnkd.in/eVhv6aHG. The position is based in Delft, Netherlands. Application deadline: 2025-07-31 Get the latest openings in your field and preferred country—straight to your email inbox. Sign up now for 14 days free: https://phdfinder.com/position-alert-service/ We’re an independent team helping students find opportunities. Found this opportunity helpful? Support us with a coffee! Also See PhD Research Fellow in the Mutual Impact of Climate Change and Offshore Renewable Energy PhD Position in Underwater Acoustics and Offshore Engineering PhD and Postdoctoral Positions in Aero/Hydro-Acoustics – ERC Project Off-coustics PhD Position in Geodesy and Satellite Radar Interferometry (InSAR) PhD Vacancies in Offshore Engineering – Underwater Acoustics and Environmental Impacts

University: Delft University of Technology (TU Delft) Country: Netherlands Deadline: 2025-07-31 Fields: Chemistry, Materials Science, Chemical Engineering, Mechanical Engineering, Biomedical Engineering Delft University of Technology (TU Delft) invites applications for two PhD positions in the field of Soft Matter Imaging and Mechanics. The successful candidates will join a multidisciplinary team to develop advanced methods for imaging and sensing dynamic phenomena in soft and bioinspired materials. The research will involve close collaboration with experts in chemistry, mechanics, and biomedical sciences to create innovative sensory chemistry for the study of highly dynamic and compliant materials. Available Positions – Position 1: Requires experience in organic synthesis and physical chemistry. An affinity for physics and engineering is an advantage. – Position 2: Requires experience in mechanics of materials. An affinity for machine learning is beneficial. Requirements – Master’s degree in Chemistry, Chemical Engineering, Materials Science, or related disciplines. – Strong command of organic synthesis and photophysical characterization techniques. – Demonstrated ability to work collaboratively within multidisciplinary teams. – When applying, please specify clearly which PhD position you are interested in. Application Procedure Interested candidates should apply no later than 31 July 2025. Please submit your application via the provided TU Delft application portal, including the following documents: – Curriculum Vitae (CV) – Transcript of grades/courses – Cover letter For Further Information, Please Contact – Dr. Georgy Filonenko (G.A.Filonenko@tudelft.nl) – Dr. Sid Kumar (Sid.Kumar@tudelft.nl) More details and application link: https://careers.tudelft.nl/job/Delft-PhD-Position-Researcher-in-Soft-Matter-Imaging-and-Mechanics-2628-CD/824362502/ Get the latest openings in your field and preferred country—straight to your email inbox. Sign up now for 14 days free: https://phdfinder.com/position-alert-service/ We’re an independent team helping students find opportunities. Found this opportunity helpful? Support us with a coffee! Also See PhD and Postdoctoral Positions in Remote Sensing of the Arctic Postdoctoral Position in Wearable Optical Sensing Technology PhD and Postdoctoral Opportunities in Experimental & Computational Mechanics of… PhD Position in Geodesy and Satellite Radar Interferometry (InSAR) Postdoctoral Researcher in Sustainable Medium Manganese Steels Development

Who We Are Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips – the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world – like AI and IoT. If you want to work beyond the cutting-edge, continuously pushing the boundaries of science and engineering to make possible the next generations of technology, join us to Make Possible® a Better Future. What We Offer Location: Bangalore,IND At Applied, we prioritize the well-being of you and your family and encourage you to bring your best self to work. Your happiness, health, and resiliency are at the core of our benefits and wellness programs. Our robust total rewards package makes it easier to take care of your whole self and your whole family. We’re committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits. You’ll also benefit from a supportive work culture that encourages you to learn, develop and grow your career as you take on challenges and drive innovative solutions for our customers. We empower our team to push the boundaries of what is possible—while learning every day in a supportive leading global company. Visit our Careers website to learn more about careers at Applied. Job Description: We are seeking a highly skilled Mechanical Engineer with extensive experience in mechanical design and strong analytical and problem-solving abilities. We value innovative thinkers who can challenge conventional practices and drive progress. What’s in it for you? Work in a dynamic, high-tech environment with cutting-edge technology. Exposure to diverse technologies and opportunities for self-development. About Our Group This Team working will be working on developing Optical Inspection and Metrology systems. Overall Team comprises of mechanical, electrical, electronics and software functions and also, we have a proto-lab for concept and feasibility approach. Work with global team in Santa Clara, Israel, Taiwan and world-wide field customers. Team was formed last 5+ years, and Total India team size is 25+. Team has many accolades and won many teams of the quarter awards. Motto of team is: ‘Alone we can do so little; together we can do so much.’ Key Responsibilities Seasoned Mechanical Engineer who is aware of general system design, Precision engineering, optical systems- design methodology, engineering, safety, and qualification and System Engineering mindset) Design mechanical components, including structural elements, pneumatic systems, vacuum systems, manual and motorized mechanisms, filtration systems, and cooling systems for clean room environments. Conduct CAE simulations and analyses for design validation and troubleshooting. Create detailed drawings, define fabrication processes, materials, and finish standards with comprehensive GD&T, and perform complex tolerance analyses. Plan and execute experiments to validate designs. Lead the mechanical aspects of the development process, present design reviews, and collaborate with cross-functional teams, including project management, product manufacturing, field support, and suppliers. Qualifications B.Tech. Mechanical Engineering 8-12 years of experience. Job requires knowledge of system engineering, Optical and metrology systems, motion mechanics, high precision motion stages, and stage subsystems (chuck, substrates/wafer handling, interferometry, metrology, …) Structural FEA as a must. Flow and thermal good to have. Proficient in first order mechanical engineering calculations for high predictability of design performance. Mechanical engineering experience in component selection, building, testing, troubleshooting, and releasing semiconductor or other similar scale capital equipment. Knowledge in SEMI S2/S8/S14, NFPA 79, F47, CE, EMI/EMC safety standards In-depth knowledge of 3D CAD design tools (i.e., Inventor) and 2D CAD drawing tools not limited to Nx, Inventor, AutoCAD, etc. Familiar with machined parts fabrication and designing for cost effective solutions. Working knowledge of materials & components used in semiconductor wafer manufacturing equipment, materials characterization methods, and failure analysis of materials/system. Experience with supporting manufacturing and service organizations through training, documentation (procedures, OMS, BKMs, etc.), and troubleshooting. Proficiency in data analysis software like Excel, or equivalent Strong time management skills with an emphasis on managing multiple projects simultaneously. Strong communications skills, organizational skills and sense of collaboration. Drive and desire to thrive in a start-up like environment. Additional Information Time Type: Full time Employee Type Assignee / Regular Travel Yes, 10% of the Time Relocation Eligible: Yes Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

University: Delft University of Technology (TU Delft) Country: Netherlands Deadline: Rolling Fields: Geodesy, Geophysics, Remote Sensing, Civil Engineering, Applied Mathematics The Faculty of Civil Engineering and Geosciences at Delft University of Technology (TU Delft) invites applications for a full-time, four-year PhD position in the area of Geodesy and Satellite Radar Interferometry (InSAR). This research will focus on advancing InSAR methodologies to achieve millimeter-level precision in surface deformation measurements, thereby enhancing our understanding of both natural and human-induced processes such as subsidence, seismic activity, and infrastructure stability. Key Responsibilities – Develop and refine InSAR techniques for monitoring surface deformation. – Analyze extensive satellite datasets from missions including Sentinel-1 and NISAR. – Integrate geodetic, physical, and mathematical models to interpret InSAR data. – Collaborate with a multidisciplinary team specializing in geodesy, remote sensing, and geophysics. – Disseminate research findings through peer-reviewed publications and international conferences. Requirements – MSc degree in Geodesy, (Geo)Physics, Mathematics, or a closely related discipline. – Strong analytical and quantitative skills, with a solid background in physical modeling and/or signal processing. – Demonstrated academic writing ability and effective communication skills. – Self-motivated, creative, and curious, with a keen interest in Earth observation and scientific research. – Programming experience in Python is advantageous. What The Position Offers – A four-year, full-time PhD appointment at a leading technical university. – Access to advanced facilities, data, and computing resources. – A supportive, international, and collaborative research environment. – Opportunities for professional growth and academic training. – Competitive salary and benefits as per the Dutch Collective Labour Agreement for Universities (CAO-NU), with monthly salary ranging from €2901 to €3707. Application Procedure Applicants should submit the following documents as a single PDF file: – Cover letter detailing motivation and suitability for the position. – Curriculum Vitae (including publications, if applicable). – Copies of BSc and MSc academic transcripts. – Contact information for two academic referees. – (Optional) Sample of academic writing, such as an MSc thesis or research paper. Applications are reviewed on a rolling basis. Early submission is encouraged. For further information or to submit your application, please contact Professor Ramon Hanssen at r.f.hanssen@tudelft.nl. Please note: This position has been advertised by Professor Ramon Hanssen on LinkedIn. Get the latest openings in your field and preferred country—straight to your email inbox. Sign up now for 14 days free: https://phdfinder.com/position-alert-service/ We’re an independent team helping students find opportunities. Found this opportunity helpful? Support us with a coffee!

OPTICS DESIGNER Location Derabassi - Punjab, India Pacesetting. Passionate. Together. HELLA, one of the leading automotive suppliers worldwide, has shaped the industry with innovative lighting systems and vehicle electronics. In addition, the company is one of the most important partners of the aftermarket and independent workshops. What motivates us: Shaping the mobility of tomorrow and fostering the central market trends such as autonomous driving, efficiency and electrification, connectivity and digitization as well as individualization. Every day, 36,000 employees worldwide are committed to this with passion, know-how and innovative strength. YOUR TASKS Design optical systems and components to meet specified requirements by understanding and interpreting customer and project needs. Lead in the development of optical prototypes, perform optical simulations and measurements to verify design performance. Develop optical models with the use of state-of-art software tools such as ZEMAX, FRED, or LightTools. Create optical specifications, tolerances, and manufacturing instructions for new optical products. Collaborate with cross-functional teams including mechanical engineering, manufacturing, and supplier management to ensure optical designs can be produced efficiently and meet quality standards. Provide technical documentation including design review presentations, test reports, and manufacturing instructions. Verify the quality of optical elements and systems with the help of optical metrology techniques including interferometry, spectrophotometry, and imaging metrology. Support the troubleshooting of optical systems in production and post-production, providing technical guidance and expertise. Keep up-to-date with the latest advancements in optics design methodologies, tools, and market trends to improve design capabilities. Execute risk assessments and devise design solutions to mitigate potential product or process issues. Perform design analysis including performance, risk, cost, and manufacturability with appropriate justifications for design choices. Adhere to all safety and compliance procedures in the design, testing, and production phases. YOUR QUALIFICATIONS Oversee and participate in optical testing, calibration, and validation activities. Provide optical design training and mentorship to junior engineers and team members. Participate and contribute to design reviews and improvement meetings. Ensure proper storage and handling of optical components to maintain quality and prevent damage. Assist in procurement of optical components, liaising with suppliers to get the best quality and cost-effective materials. Provide technical support for sales and marketing, such as providing necessary data and documentation for technical presentations or product briefs. Help in troubleshooting and resolving any optical issues identified by customers in a timely manner. Take the opportunity to reveal your potential within a global, family-run company that offers you the best possible conditions for progressing in your career. Please send us your application through our careers portal, citing reference number req16613. HELLA India Lighting Ltd. Neha Saini Derabassi - Punjab

Job Description: We are seeking a highly skilled Mechanical Engineer with extensive experience in mechanical design and strong analytical and problem-solving abilities. We value innovative thinkers who can challenge conventional practices and drive progress. What’s in it for you? Work in a dynamic, high-tech environment with cutting-edge technology. Exposure to diverse technologies and opportunities for self-development. About Our Group: This Team working will be working on developing Optical Inspection and Metrology systems. Overall Team comprises of mechanical, electrical, electronics and software functions and also, we have a proto-lab for concept and feasibility approach. Work with global team in Santa Clara, Israel, Taiwan and world-wide field customers. Team was formed last 5+ years, and Total India team size is 25+. Team has many accolades and won many teams of the quarter awards. Motto of team is: ‘Alone we can do so little; together we can do so much.’ Key Responsibilities: Seasoned Mechanical Engineer who is aware of general system design, Precision engineering, optical systems- design methodology, engineering, safety, and qualification and System Engineering mindset) Design mechanical components, including structural elements, pneumatic systems, vacuum systems, manual and motorized mechanisms, filtration systems, and cooling systems for clean room environments. Conduct CAE simulations and analyses for design validation and troubleshooting. Create detailed drawings, define fabrication processes, materials, and finish standards with comprehensive GD&T, and perform complex tolerance analyses. Plan and execute experiments to validate designs. Lead the mechanical aspects of the development process, present design reviews, and collaborate with cross-functional teams, including project management, product manufacturing, field support, and suppliers. Qualifications: B.Tech. Mechanical Engineering 8-12 years of experience. Job requires knowledge of system engineering, Optical and metrology systems, motion mechanics, high precision motion stages, and stage subsystems (chuck, substrates/wafer handling, interferometry, metrology, …) Structural FEA as a must. Flow and thermal good to have. Proficient in first order mechanical engineering calculations for high predictability of design performance. Mechanical engineering experience in component selection, building, testing, troubleshooting, and releasing semiconductor or other similar scale capital equipment. Knowledge in SEMI S2/S8/S14, NFPA 79, F47, CE, EMI/EMC safety standards In-depth knowledge of 3D CAD design tools (i.e., Inventor) and 2D CAD drawing tools not limited to Nx, Inventor, AutoCAD, etc. Familiar with machined parts fabrication and designing for cost effective solutions. Working knowledge of materials & components used in semiconductor wafer manufacturing equipment, materials characterization methods, and failure analysis of materials/system. Experience with supporting manufacturing and service organizations through training, documentation (procedures, OMS, BKMs, etc.), and troubleshooting. Proficiency in data analysis software like Excel, or equivalent Strong time management skills with an emphasis on managing multiple projects simultaneously. Strong communications skills, organizational skills and sense of collaboration. Drive and desire to thrive in a start-up like environment. Qualifications Education: Bachelor's Degree Skills Certifications: Languages: Years of Experience: 4 - 7 Years Work Experience: Additional Information Shift: Day (India) Travel: Yes, 10% of the Time Relocation Eligible: Yes Applied Materials is an Equal Opportunity Employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law. Show more Show less

XDlinx Space Labs Location : Hyderabad Exp Level : 5 - 8 Years Optical Engineer - Job Description XDLINX Spacelabs is a leading satellite manufacturing company dedicated to drive innovation and excellence in the space industry. Our mission is to revolutionize satellite technology and empower with the advanced space solutions. With decades of experience and a deep understanding of satellite systems, our team of experts excels in design, development, and manufacturing a range of mission specific satellites and payloads. We actively collaborate with space agencies, research institutions, and commercial partners worldwide. Position Summary: We are seeking a skilled and innovative Senior Optical Engineer to lead a team of 5-7 young optical engineers. As a Senior Optical Engineer, you will play a pivotal role in designing, developing, and optimizing optical systems and components for an optical payload which will qualify for space flight onboard our satellites. Your expertise in optical design, analysis, and testing the relevant class of optical payloads will be crucial in advancing our products and technologies. Responsibilities: Optical System Design: (Desirable) Ø Conceptualizing optical payload of a satellite Ø Complete design of a telescope including reflective, refractive, dispersive elements and sensors/detector systems Ø Detailed ray tracing, analysis, Image quality assessment employing Zemax/Code V Software Ø Utilize optical modelling software like Zemax/Code V to simulate and optimize the performance of optical components and detector systems. Ø Image Quality Parameter estimation and optimization of MTF and SNR Ø Study and perform thermal gradient analysis on performance Prototyping, Testing and Characterization: Ø Conduct rigorous optical testing and analysis of payload to measure performance metrics and identify areas for improvement. Ø Relative Spectral Response of the multispectral and Hyperspectral imager Ø Non-uniform sensitivity assessment of Camera/Sensor Electronics Ø MTF and SNR measurements Research and Innovation: Ø Stay up-to-date with advancements in optical technologies and research to propose new ideas and innovative solutions. Ø Contribute to the development of intellectual property through patents and publications. Hand-on experience: Ø First hand experience employing a. Collimator, b. Monochromator, c. Integrated Light sphere and d. CMOS sensors Quality Assurance: Ø Ensure optical systems and components meet high-quality standards and comply with relevant regulations and industry standards. Qualifications and Experience: Bachelor's, Master's, in Optical Engineering, Physics with Photonics specialization or a related field. Experience in optical system design and analysis, preferably in an industrial or research setting. Proficiency in optical modelling software, such as Zemax, Code V and experience in utilizing other optical design tools. Strong knowledge of optics principles, optical materials, and optical component selection. Familiarity with optical metrology and testing techniques, such as interferometry or MTF measurement. Hands-on experience with optical prototyping, alignment, and testing. Excellent problem-solving skills with a focus on innovative and practical solutions. Ability to work independently as well as collaboratively in a team environment. Effective communication skills, with the ability to present complex technical concepts to both technical and non-technical stakeholders. You must hold 5+ years’ experience in the relevant field Interested candidates can share their resumes – Recruitment@xdlinx.space Join our dynamic team of engineers and contribute to cutting-edge optical technologies that have a profound impact. This is an exciting opportunity to be part of a forward-thinking organization focused on pushing the boundaries of optical engineering Show more Show less