4772 Instrumentation Jobs - Page 48

Job Description Job Overview: The Principal Telecom Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Telecommunications (Eng)-related problems and will work independently with minimal guidance. The Principal Telecom Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in Telecommunications (Eng). As such, they must have in-depth expertise in Telecommunications (Eng) as well as broad knowledge of the Telecommunications (Eng) discipline within the Engineering function. Responsibilities Key Tasks and Responsibilities: Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards related to Telecom systems Apply in-depth skills and broad knowledge of the business to address complex problems and non-standard situations Prepare clear and accurate detailed design calculations and analyses including design reports and procedures Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements communicate and explain difficult concepts and persuade others to adopt а point of view When acting as Lead Engineer, in addition: Direct small or medium Telecom Engineering team as а Lead Engineer Led the Discipline engineering design of the assigned work area and completed it within the planned schedule and budget, by standards, MDR, and project-specific procedures and to а high professional standard Plan, organize, and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule, and all manpower resources - agree allocations with the Discipline Manager Ensure interfaces and deliverables are identified Maintain responsibility for progress and productivity, identifying any required corrective action Act as project representative for Discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc. Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Interpret contractual requirements as they relate to engineering execution Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders Interface with all disciplines to develop clash-free designs Interface with other departments to obtain input for Discipline designs and drawings Maintain close coordination with other engineering disciplines, Planning, Fabrication, Marine, and Project Management Teams, as required Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager Prepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirements Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity Review project schedule and fabrication schedule about construction sequence, milestones, and engineering scope Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required Provide technical direction and review of Designers producing products related to Telecom Engineering Prepare, review, and (as Lead Engineer) approve design reports and procedures Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures; procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations, preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by the Discipline Lead Engineer Assist in updating weight reports based on receipt of vendor information Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary Review and (as Lead Engineer) approve design verification through single-discipline check / inter-discipline check (IDC) Provide technical support to fabrication queries, including identifying defect/rectification requirements Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary, and manpower related Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved Present issues and problems to Customers in а timely manner and assist the Lead Engineer in negotiating resolution by project and company requirements Perform (as required) Technical Quality Audit reviews by MDR Global Procedures Assist Lead Engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval Capture lessons learned and enter into MDR's Lessons Learned system Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc. Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables Responsible for the engineering integrity of the assigned work area Monitor costs of own work processes Assist in the maintenance of departmental technical guidelines and standard calculation notes Participate in the development and maintenance of Global Procedures, Software, and Standards May participate in standards development committees or task groups such as NFPA Develop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars, present design solutions, and/or present topics at "lunch and learns"; etc.) Identify and provide training to staff in specific techniques and proprietary software Provide information on employee performance to the Discipline Manager Assist the Discipline manager in interviewing job applicants Prepare, review, and (as Lead Engineer) approve Telecom systems definition, including philosophy, specifications, safety drawings, and system architecture Prepare, review, and (as Lead Engineer) approve FDS&GDS logic (as applicable) / cause & effect diagrams, cooperation with Instrumentation Engineering Review and (as Lead Engineer) approve specifications and data sheets for Telecom equipment Review and (as Lead Engineer) approve Telecom equipment spare parts lists Review and (as Lead Engineer) approve inputs to P&ID (HSE Process Part especially) development and markups based on receipt of vendor information Review and (as Lead Engineer) approve Telecom equipment testing procedures Attend Telecom equipment FATs, as required Participate in HAZOP, SIL, and Classification Studies, as required Assist in closing out HAZOP action items if needed Provide construction, pre-commissioning, and commissioning support, as required Participate in Telecom equipment testing, as required Gain deep knowledge of Telecom related systems (FDS, GDS, CCTV, TEL/LAN, Radio Systems (RS), Intercom Systems (IS), Public Address General Alarm Systems (PA-GA), Intrusion Detection Systems (IDS) and/or Access Control Systems (ACS), etc.) When acting as Lead Engineer, in addition: Act as project-based Discipline point of contact in communications and meetings with Customer counterparts Ensure substantive communications are documented Prepare bids and project Discipline engineering budget and execution plans, updating as required Identify project staff needs based on knowledge of individual engineers' skill sets and provide requests to the Discipline manager Plan, organize, and assign tasks, responsibilities, and manhour budgets to the discipline team, and verify tasks are completed within budgets Plan Discipline Level 4 detail deliverable schedule/ register compliant with the overall execution plan Prepare working forecasts identifying change management plans, corrective action, and real-time schedules Provide Discipline inputs for actual, planning, and forecasting progress reports including associated productivity Alert the project team of any deviation from the scope or а need for a change order Monitor КРI measurement results, and take corrective action as necessary to improve Discipline performance, including performance at interfaces with others Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of necessary design inputs Review and approve requisitions, technical quotation evaluations and queries, compiled bid tabulations and recommendations, and purchase requisitions; and coordinate with Procurement to expedite vendor documents as required Lead the Discipline team during project audits (internal, Customer, and third-party technical audits) and Design Reviews Review comments from Customers & other agencies on documents and drawings produced by the team, and resolve and give guidance on their update and incorporation Assist the Discipline manager in the preparation of quarterly forecasts and manpower planning Anticipate project engineering needs and plan accordingly Coordinate with vendors for discipline-managed / procured items Assist the Discipline manager and Project Engineering Manager or Project Manager in the Performance Evaluation of project team members Reports to: Project: Lead Engineer, Project Engineering Manager or Project Manager Functional: Supervising Engineer or Engineering Manager Liaise With: AII Engineering disciplines, Fabrication Group, Safety Department, Offshore Group, Project Management Team, Document Control, Project Planner, Project Cost Controller, QC and Certification Group, Procurement Group, Subcontractors and Vendors, and Customers Supervises: Senior Telecom Engineers and Telecom Engineers Qualifications Essential Qualifications and Education: Bachelor’s degree in electrical or Electronics and Instrumentation Engineering (Master's Degree is preferred) 15-20 years of experience in oil and gas with major contractors or consultants predominantly performing detail design Detailed knowledge of design techniques and analysis methods, and detailed knowledge of the theory, content and application of standards, codes and guidelines as applicable Knowledgeable in project coordination and execution skills Preferably Registered Professional Engineer or member of a professional engineering society Knowledge of Functional Safety (HW/SW design acc. IEC 61508, Functional Safety Analysis, Design and Operation acc. IEC 61511) About Us Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably. For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries. Show more Show less

Job Purpose: To provide electrical engineering expertise for the design, installation, operation, and maintenance of Tunnel Boring Machines (TBM) on underground construction projects. Key Responsibilities TBM Electrical Systems: Oversee the design, installation, commissioning, and maintenance of all electrical systems on the TBM, including the main drive system, control systems, lighting systems, and communication systems. Develop electrical schematics, wiring diagrams, and control panel layouts. Troubleshoot electrical faults and implement corrective actions. Power Supply and Distribution: Design and implement the power supply and distribution system for the TBM, including the installation of power cables and distribution boards. Monitor power consumption and ensure efficient energy utilization. Control Systems: Design, program, and commission PLC (Programmable Logic Controller) and SCADA (Supervisory Control and Data Acquisition) systems. Monitor and optimize the performance of the TBM's control systems. Troubleshoot control system issues and implement corrective actions. Instrumentation and Monitoring: Design and install instrumentation systems to monitor TBM performance and operating parameters. Calibrate and maintain instrumentation to ensure accurate data collection. Analyze data to identify potential issues and optimize TBM performance. Safety and Quality: Ensure compliance with electrical safety standards and regulations. Conduct regular safety inspections and risk assessments. Monitor quality control procedures to ensure the TBM operates efficiently and reliably. Documentation and Reporting: Maintain accurate records of electrical systems, maintenance activities, and performance data. Prepare technical reports and presentations. Show more Show less

Job Description Perform operations and maintenance of the Chiller plants and other field works Support analysis and optimisation of DCS plant operations & maintenance, including troubleshooting of plant operations and maintenance issues Supervise and implement all operations and maintenance processes including externally sourced contractors Maintain all machinery to ensure it’s at working standards Conduct regular inspections of the facilities to detect and resolve problems Support the planning and management of all repair and installation activities, including contract management Assign repair schedules and evaluate repair cost estimates Document and prepare daily progress reports and maintenance logs Oversee equipment stock and place orders for new supplies when necessary Implement and monitor DCS plants’ service and maintenance programme Support the execution of planned maintenance schedule and to ensure that work methods are implemented and comply with the establish standards and procedure Administer Permit To Work system Support Preventive Maintenance program Analyse and implement facility enhancement and improvement works Ensure compliance with all the health and safety rules and regulations Improve health, safety and environmental aspects of the company by taking all responsible steps to protect the health and safety of themselves, their colleagues and other members of the community Such other duties and responsibilities as may be reasonably requested by your immediate supervisor from time to time Job Requirements Diploma in Electrical/Mechanical Engineering or relevant ITI holders with minimum 3 years of chiller plant operations & maintenance experience. Experience in operations and maintenance of Chiller plants (Water-cooled and air-cooled chillers and associated high side systems at plant room level) Keen interest in the District Heating and Cooling System (DHCS) business Good understanding of the technical features Air-Conditioning and Mechanical Ventilation (ACMV) and chiller plant system. Knowledge in District Cooling System (DCS) will be an added advantage Practical experience in Energy Management System (EMS) and is conversant in local/remote control and monitoring system as well as in instrumentation Working knowledge of facilities, machines and equipment Good communication and interpersonal skills Good awareness of Environment, Health and Safety with a strong safety mindset Willing to perform shift duty (12-hour rotating shift) at various sites Role to be based out of Bangalore, Karnataka BUSINESS SEGMENT Infrastructure PLATFORM Operating Division Show more Show less

Experience : 5.00 + years Salary : Confidential (based on experience) Shift : (GMT+05:30) Asia/Kolkata (IST) Opportunity Type : Office (Noida) Placement Type : Full time Permanent Position (*Note: This is a requirement for one of Uplers' client - Addverb) What do you need for this opportunity? Must have skills required: PLC programming, VFD, HMI Design, BOM Creation, Motors, sensor, communication protocol, Site Management Addverb is Looking for: Job Description: Addverb Technologies Ltd. Doc.No.: - FRM/HR/33 Rev.No./Date: - 00 Job Description Format Origin Date: - 01-11-2023 Job Description Role Department Control Engineer/Lead Control Engineer R&D Controls Reports To Senior Manager/Chief Manager Purpose of the role The incumbent will be responsible to develop new products or suggest required changes or improvements in our existing products based. The person must understand the basics of mechanics and suggest appropriate control element. Must actively participate in testing of in-house products and if required should visit the customer site to support the project team. Technical Skills Required Knowledge of motor selection, motor controller and programming Knowledge of sensors, wiring basics, load calculation & OPC server Knowledge of various Industrial networking protocols Profinet, Profibers, device net, device sizing & commissioning Must have worked on PLC programming, SCADA/HMI Basic idea about industrial standards and certifications Behavioral Skills Required Logical thinking approach towards problem solving Delivers sustainable results, stays focused even in challenging situations and overcomes obstacles Effectively communicate and partner with teammates and cross-functional teams Efficient time management and organization skills Flexible to adapt to same-day and next-day changes to project scope and location A commitment to engineering excellence & knowledge of latest technologies S. No. Job Responsibilities Interact with various stakeholders (Customers, Vendors, Cross Functional Teams) to get a detailed insight into solution requirements. Conceptualize and operationalize the solution and document them for development and ensure that latest technology being used for the development. Finalization of the solution with stakeholders and then finding the vendors based on technical required along with the SCM team and arrangement of POC’s for vendors. Release engineering BOM as per the internal process. To actively work in prototyping development and ensure prototype testing. Handle the issues reported by After Sales Team and provide the necessary support. Get involved with the after-sales team to get to know the product performance deployed at the customer site and bring improvements if required. Maintain the documentation of products and projects as per the company process. Train & develop the fresh talent in the organization. Minimum Qualification Bachelor's degree in Mechatronics, Instrumentation, Electrical Engineering, or equivalent experience – 60% and above throughout. Years Of Experience 3-5 Years Addverb Technologies Limited (Formerly known as Addverb Technologies Private Limited) Registered & Corporate Office: CIN: U74999UP2016PLC122944 Email: automate@addverb.com Plot No. 5, Sector-156, Phase-II, Noida, 201301, UP, India Contact: 0120 4844 759 Website: www.addverb.com GST No: 09AAOCA5226F2ZL mailto:automate@addverb.com http://www.addverb.com/ How to apply for this opportunity? Step 1: Click On Apply! And Register or Login on our portal. Step 2: Complete the Screening Form & Upload updated Resume Step 3: Increase your chances to get shortlisted & meet the client for the Interview! About Uplers: Our goal is to make hiring reliable, simple, and fast. Our role will be to help all our talents find and apply for relevant contractual onsite opportunities and progress in their career. We will support any grievances or challenges you may face during the engagement. (Note: There are many more opportunities apart from this on the portal. Depending on the assessments you clear, you can apply for them as well). So, if you are ready for a new challenge, a great work environment, and an opportunity to take your career to the next level, don't hesitate to apply today. We are waiting for you! Show more Show less

Are you a Piping Design Engineer looking for a new opportunity? Look no further! Tecnimont, a leading engineering and construction company, is seeking a talented and experienced Piping Design Engineer to join our team. As a Piping Design Engineer at Tecnimont, you will be responsible for designing and implementing complex piping systems for various industrial projects. This includes creating detailed piping layouts, identifying the best materials and components for each project, and ensuring that all designs comply with industry standards and regulations. Key Responsibilities Develop detailed piping and instrumentation diagrams (P&IDs) in collaboration with the engineering team Perform hydraulic and stress analysis to ensure the integrity and efficiency of piping systems Select appropriate piping materials and components based on project requirements and specifications Collaborate with other engineering disciplines to ensure seamless integration of piping systems with other project components Participate in site visits and inspections to validate piping design and ensure compliance with project requirements Provide technical support and guidance to the construction and commissioning team throughout the project lifecycle Stay updated on industry trends and best practices to continuously improve piping design processes and methodologies Job Requirements Bachelor's degree in Mechanical Engineering. Proven experience in piping design for industrial plants, refineries, or petrochemical facilities Proficient in 3D design software such as AutoCAD, PDMS, or similar Strong understanding of piping codes and standards (ASME, ANSI, API, etc.) Excellent problem-solving and analytical skills Effective communication and teamwork abilities Ability to work under pressure and meet deadlines At Tecnimont, we are committed to providing our employees with a dynamic and collaborative work environment, where creativity and innovation are encouraged. As a Piping Design Engineer, you will have the opportunity to work on exciting and challenging projects, while receiving competitive compensation and benefits. If you are ready to take on a new and rewarding opportunity as a Piping Design Engineer at Tecnimont, we encourage you to apply and join our talented team of professionals. We look forward to welcoming you aboard! Show more Show less

WPP is the creative transformation company. We use the power of creativity to build better futures for our people, planet, clients, and communities. Working at WPP means being part of a global network of more than 100,000 talented people dedicated to doing extraordinary work for our clients. We operate in over 100 countries, with corporate headquarters in New York, London and Singapore. WPP is a world leader in marketing services, with deep AI, data and technology capabilities, global presence and unrivalled creative talent. Our clients include many of the biggest companies and advertisers in the world, including approximately 300 of the Fortune Global 500. Our people are the key to our success. We're committed to fostering a culture of creativity, belonging and continuous learning, attracting and developing the brightest talent, and providing exciting career opportunities that help our people grow. Why we're hiring: At WPP, technology is at the heart of everything we do, and it is WPP IT’s mission to enable everyone to collaborate, create and thrive. WPP IT is transforming to create our future IT together that will support the world’s largest creative transformation company. As we continue on this journey, we have identified the need for a Google Technical Engineer to work across Functions including support and develop, optimise and simplify global platform products, integrations and features built on WPP Platforms, enabling improved client delivery and employee experiences globally. Reporting into the Google Workspace Head, you will support the innovation and lifecycle management for Google Workspace, helping to prioritise work backlogs within a defined envelope aligned to this product family- convening and commissioning from across WPP IT as necessary What you'll be doing: Provide 1st line support for Google Workspace products and other integrated collaboration tools. Technical configuration and deep technical knowledge of Google workspace across multiple tenants. Work with the Google Workspace team to align licensing to ensure that Opcos are using the most suitable and cost optimized license for their role/needs. Engage with the Google Workspace Team to promote project initiatives and support implementation. work with technical experts in other areas and offer Google Workspace expertise in M&A and consolidation activities. Work with the Google Workspace Community providing community support and enablement though user groups and a new Center of Excellence or Community of Practice. Proactively identify critical activities, security & compliance enhancements, monitor platform and address security vulnerabilities Represent the "Voice of the Customer" within Google to inform and influence engineering and document business-value driven customer success stories and shared practices. Work with projects implementation that require technology input and development for Google products. Drive adoption of secure by design, DevOps engineering and agile practices within the Architype context as defined by Platforms and Transformation CoPs Drive the maximum possible level of automation and instrumentation of the development lifecycle for Google products in alignment with SRE ethics. What you'll need: Technology Expert in Google Workspace and Cloud Collaboration platforms SaaSOps Product Lifecycle Management/Ownership Appscript and Appsheet for automation and efficiency Product specialist engineering and support Stakeholder engagement Shift Timings: 6:30 am to 3:00 PM Who you are: You're open : We are inclusive and collaborative; we encourage the free exchange of ideas; we respect and celebrate diverse views. We are accepting: of new ideas, new partnerships, new ways of working. You're optimistic : We believe in the power of creativity, technology and talent to create brighter futures or our people, our clients and our communities. We approach all that we do with conviction: to try the new and to seek the unexpected. You're extraordinary: we are stronger together: through collaboration we achieve the amazing. We are creative leaders and pioneers of our industry; we provide extraordinary every day. What we'll give you: Passionate, inspired people – We promote a culture of people that do extraordinary work. Scale and opportunity – We offer the opportunity to create, influence and complete projects at a scale that is unparalleled in the industry. Challenging and stimulating work – Unique work and the opportunity to join a group of creative problem solvers. Are you up for the challenge? We believe the best work happens when we're together, fostering creativity, collaboration, and connection. That's why we’ve adopted a hybrid approach, with teams in the office around four days a week. If you require accommodations or flexibility, please discuss this with the hiring team during the interview process. WPP is an equal opportunity employer and considers applicants for all positions without discrimination or regard to particular characteristics. We are committed to fostering a culture of respect in which everyone feels they belong and has the same opportunities to progress in their careers. Please read our Privacy Notice (https://www.wpp.com/en/careers/wpp-privacy-policy-for-recruitment) for more information on how we process the information you provide. Show more Show less

Why Join Burns & McDonnell? We’re a top-ranked engineering and construction firm where employee ownership is more than a phrase it’s central to who we are. Our Mumbai office tackles major projects worldwide, and our people thrive in a setting that encourages leadership, continuous learning, and personal fulfillment. Expect global travel opportunities, advanced training, and collaboration with industry experts on some of the most significant Oil & Gas and Renewable Energy initiatives. We have a proven track record of handling intricate design challenges, and our team is celebrated for going above and beyond to deliver remarkable results. Plus, we believe in flexible schedules and a workplace culture where every individual’s perspective matters. Role Summary As I&C Designer at Burns & McDonnell India, you will be a key member of a dynamic group that excels in designing complex Instrumentation systems for global Oil & Gas projects. From conceptual layouts to the final build, you will provide pivotal design insights and coordinate with multi-disciplinary teams to achieve world-class outcomes. Candidate will require ability to work collaboratively with other team members (Engineers and Designers situated both in Mumbai and United States) in a multidisciplinary project team environment to develop design documents for construction of a plant. Key Responsibilities: Apply your solid knowledge of instrumentation theory and engineering principles to produce robust design solutions Create and refine detailed 2D drawings, plans, and other design documents based on S3D model, installation details and specifications Participate in Model Review to discuss I&C prospects with respect to operability, maintainability and constructability. Create and refine wiring, loops, index, cable schedule, tubing list in various modules of SI - Smart Instrumentation (formally IN-Tools) Prepare material take-offs (MTO) Participate in interdisciplinary and BMUS team coordination Leverage office productivity tools (Excel Spreadsheets and Power-BI Reports) for project documentation and data analysis What Makes You a Great Fit Adept at guiding teams and communicating effectively, building strong professional relationships Operate with high ethical standards, always prioritizing the company’s best interests Self-driven and agile in adapting to shifting project demands Embraces our employee ownership culture and champions diversity and inclusivity Enthusiastic about our bonus-incentive-based compensation model and participation in our Shared Appreciation Plan (SAP), which continues to reward employees for their contributions Thrives in a supportive, engaging environment where everyone’s input is encouraged and respected - Qualifications and Skills Diploma in Instrumentation Engineering with 10 years of pertinent experience Demonstrated expertise in instrument design with strong problem-solving capabilities Familiar with S3D design software, Navisworks and similar software’s Familiar with AutoCAD, MS-Office and similar software’s Proven ability to coordinate teams and drive collaborative efforts Fluent in English, both written and spoken Career Growth Plan At Burns & McDonnell, we truly invest in your future. Whether you’re aspiring to become a Lead Designer or explore other career avenues, you’ll find ample room to grow in our employee-owned environment. By engaging in diverse, forward-thinking projects, you’ll develop deep technical skills while shaping a career that aligns with your personal ambitions. Our commitment to flexibility and continuous professional development ensures that you’re always supported on your path to success.

Why Join Burns & McDonnell? We’re a top-ranked engineering and construction firm where employee ownership is more than a phrase it’s central to who we are. Our Mumbai office tackles major projects worldwide, and our people thrive in a setting that encourages leadership, continuous learning, and personal fulfillment. Expect global travel opportunities, advanced training, and collaboration with industry experts on some of the most significant Oil & Gas and Renewable Energy initiatives. We have a proven track record of handling intricate design challenges, and our team is celebrated for going above and beyond to deliver remarkable results. Plus, we believe in flexible schedules and a workplace culture where every individual’s perspective matters. Role Summary As I&C Designer at Burns & McDonnell India, you will be a key member of a dynamic group that excels in designing complex Instrumentation systems for global Oil & Gas projects. From conceptual layouts to the final build, you will provide pivotal design insights and coordinate with multi-disciplinary teams to achieve world-class outcomes. Candidate will require ability to work collaboratively with other team members (Engineers and Designers situated both in Mumbai and United States) in a multidisciplinary project team environment to develop design documents for construction of a plant. Key Responsibilities: Apply your solid knowledge of instrumentation theory and engineering principles to produce robust design solutions Create and refine detailed 2D drawings, plans, and other design documents based on S3D model, installation details and specifications Participate in Model Review to discuss I&C prospects with respect to operability, maintainability and constructability. Create and refine wiring, loops, index, cable schedule, tubing list in various modules of SI - Smart Instrumentation (formally IN-Tools) Prepare material take-offs (MTO) Participate in interdisciplinary and BMUS team coordination Leverage office productivity tools (Excel Spreadsheets and Power-BI Reports) for project documentation and data analysis What Makes You a Great Fit Adept at guiding teams and communicating effectively, building strong professional relationships Operate with high ethical standards, always prioritizing the company’s best interests Self-driven and agile in adapting to shifting project demands Embraces our employee ownership culture and champions diversity and inclusivity Enthusiastic about our bonus-incentive-based compensation model and participation in our Shared Appreciation Plan (SAP), which continues to reward employees for their contributions Thrives in a supportive, engaging environment where everyone’s input is encouraged and respected - Qualifications and Skills Diploma in Instrumentation Engineering with 10 years of pertinent experience Demonstrated expertise in instrument design with strong problem-solving capabilities Familiar with S3D design software, Navisworks and similar software’s Familiar with AutoCAD, MS-Office and similar software’s Proven ability to coordinate teams and drive collaborative efforts Fluent in English, both written and spoken Career Growth Plan At Burns & McDonnell, we truly invest in your future. Whether you’re aspiring to become a Lead Designer or explore other career avenues, you’ll find ample room to grow in our employee-owned environment. By engaging in diverse, forward-thinking projects, you’ll develop deep technical skills while shaping a career that aligns with your personal ambitions. Our commitment to flexibility and continuous professional development ensures that you’re always supported on your path to success.

hackajob is collaborating with American Express to connect them with exceptional tech professionals for this role. As part of our diverse tech team, you can architect, code and ship software that makes us an essential part of our customers’ digital lives. Here, you can work alongside talented engineers in an open, supportive, inclusive environment where your voice is valued, and you make your own decisions on what tech to use to solve challenging problems. Amex offers a range of opportunities to work with the latest technologies and encourages you to back the broader engineering community through open source. And because we understand the importance of keeping your skills fresh and relevant, we give you dedicated time to invest in your professional development. Find your place in technology on #TeamAmex. Software Development Moderate level ability in software development, such coding assignments Function as member of an agile team by contributing to software builds through consistent development practices (tools, common components, and documentation) Writing code and unit tests, automation, and conducting code reviews and automate testing. Debug basic software components and identify code defects for remediation. Enable the deployment, support, and monitoring of software across test, integration, and production environments. Automate deployments in test or production environments. Automatically scale applications based on demand projections. Leadership Demonstrate increased self-reliance to achieve team goals. Influence team members with creative changes and improvements by challenging status quo and demonstrating risk taking ability. Range Of Impact/Influence Accountable for team completing work you’re leading and work you are doing as agreed upon. Accountable to team for delivery of quality work Serving as a core member of an agile team that leads user story analysis and elaboration, designs and develops software applications. Responsible for the applications architecture / technical design & build, work/coordinate with other team’s architect, engineers, and vendors as necessary Identifying exciting technology modernization opportunities for adopting new open source-based technology tools & products to solve existing needs and predicting future challenges. Performing ongoing refactoring of code, utilizing visualization and other techniques to fast-track concepts, and delivering continuous improvement. Working with product managers to prioritize features for ongoing sprints and managing a list of technical requirements based on industry trends, new technologies, known defects, and issues. Contribution in complex Data Warehousing and Business Intelligence project implementations Experience in working directly with business customers. Defining and implementing data integration architecture Manage your own time, and work well both independently and as part of a team. Quickly generate and updating proof of concepts for testing and team feedback Embrace emerging standards while promoting best practices. Minimum 4 years of software development experience in a professional environment and/or comparable experience: Bachelor’s degree in computer science, computer engineering or equivalent is required with hands-on expertise with application design, software development and automated testing. Profound Knowledgebase with Java, Spring, Spring-Boot Open source and building RESTful APIs Expert Java; fluency with Java 8 streams. Knowledgeable and experienced with real time framework, data streaming like Kafka, Filnk), in-memory computation and data virtualization tools & techniques. Knowledgeable and experienced with scripting languages such as Python is preferred. Strong UNIX shell scripting skills Thorough understanding of XML, JSON, Web Service technologies, and data structure fundamentals Highly proficient in SQL and PL/SQL; Skilled at optimizing large, complicated SQL statements; Strong PL/SQL skills including complex query building and query performance tuning. Experience with DevOps tools, automating engineering and operational tasks. Strong Knowledge of logical and physical data modeling (relational, dimensional data modeling) Familiarity with Time Series Databases, monitoring, instrumentation, observability tools and concepts Provide technical recommendations to improve efficiency of Data Management /ETL process. Strong dB query optimization & performance tuning skills. The ability to analyze and resolve performance issues within variety of operational environments quickly and efficiently. Create/ maintain database objects such as tables, views, indexes, constraints, and SQL code, and stored procedures and shell scripts. Familiar with Data Warehouse concept, ETL design, development, and maintenance with successful implementation of large Enterprise BI solutions Experience with design and coding across one or more platforms and languages as appropriate Knowledge in objected oriented analysis and design across a variety of platforms. Demonstrated experience in Agile development, application design, software development, and testing. Ensure data quality and integrity within each data set and support linkage to other appropriate data sets in consistent manner. This includes testing and validating any new database design against previous data structures. Demonstrated ability to analyze data concerning production volumes, batch schedules, and i/o statistics. Ability to effectively communicate with internal and external business partners. Experience with a broad range of software languages and financial business domain knowledge will be a plus. Benefits We back you with benefits that support your holistic well-being so you can be and deliver your best. This means caring for you and your loved ones' physical, financial, and mental health, as well as providing the flexibility you need to thrive personally and professionally: Competitive base salaries Bonus incentives Support for financial-well-being and retirement Comprehensive medical, dental, vision, life insurance, and disability benefits (depending on location) Flexible working model with hybrid, onsite or virtual arrangements depending on role and business need Generous paid parental leave policies (depending on your location) Free access to global on-site wellness centers staffed with nurses and doctors (depending on location) Free and confidential counseling support through our Healthy Minds program Career development and training opportunities American Express is an equal opportunity employer and makes employment decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, disability status, age, or any other status protected by law. Offer of employment with American Express is conditioned upon the successful completion of a background verification check, subject to applicable laws and regulations. Show more Show less

Job Title Technical Support Executive (West South) - Sensormatic (India) Company Sensormatic India by Johnson Controls, Inc. About Us Sensormatic India is a dynamic and rapidly growing company in Retail Industry with a strong commitment to quality and innovation. We are seeking a skilled and experienced Tech Support Specialist to join our team, focused on driving technical support in India. This is an exciting opportunity to work in tech support and make a significant impact and contribute to our companys growth and success. Job Overview As Technical Support executive for Sensormatic in India, you will be responsible for managing and executing technical projects, ensuring they are delivered on time and within budget, and adhering to quality standards. Answering and responding to inquiries, calls, emails, and chat messages from customers and colleagues. and the ability to work cross-functionally to ensure alignment with our overall business goals. Key Responsibilities Technical L1 Support -Provide technical support and assistance to customers and team members via phone, email, or chat, support Sales team for BOQ and Drawings marking. Technical Expertise Providing technical guidance and expertise to the team, troubleshooting issues, and ensuring the quality of work. Problem Solving Addressing operational issues and concerns in a timely manner. Testing and evaluating new technologies . - New Products, systems testing and reports and handling capacity of new software. Identifying hardware and software solutions . - Identify and diagnose technical issues reported by customers or team members. Resolve technical problems in a timely and efficient manner. Communication and Interpersonal Skills Strong communication and collaboration skills to effectively interact with team members and clients. Qualifications Bachelor s degree in electrical/Electronical/ Instrumentation, master s degree is a plus. 7 to 10 years experienced of Tech Support, preferably in Retail Industry Proven experience in Tech support, presales, troubleshooting, BOQ including the ability to manage multiple projects simultaneously. Strong Troubleshooting, communication, and problem-solving skills. Deep knowledge of the FAS, ACCESS, CCTV IAS, AM, RF RFID Sectors in India. Proficiency in using tools and software. Results-oriented, with a focus on continuous improvement.

In This Role, Your Responsibilities Will Be: Implement to Emerson s project execution life cycle and maintain all relevant documentation, including technical and quality documents. Own the project and act as the primary connect with the customer for the entire scope of the project. Provide technical support to the Project Manager, assisting with activities such as scope reviews, kickoff meetings, resource planning, engineering planning, procurement support, schedule planning, quality control, project monitoring and control, customer interaction, risk management, organizational change, performance reporting, progress tracking, and project closeout. Analyze customer inputs and understand requirements such as Design Specifications, PIDs, Control Narratives, I/O lists, Instrument Index, and Operating Philosophies. Raise Technical Queries when needed. Lead a team of SW/HW engineers working on the project. Ensure compliance with the project s requirements. Develop system designs and review system architecture for the entire Coordinated Control and Safety System (ICSS). Perform I/O to Controller Assignment. Define software and hardware concepts, including third-party interfaces (e. g. , Modbus, Profibus, OPC). Develop software libraries, including logic and graphics, and build project-specific software templates. Perform software typical tests and develop I/O base control modules. Craft and develop customized, sophisticated logic and graphics. Build third-party interface databases/modules. Review and develop the Bill of Materials (BOM) for the entire system. Review all project-related documentation, including SW/HW and project management aspects. Develop internal test plans, verify cabinet builds, and perform internal testing. Conduct Third-Party Interface testing. Develop and implement Software (SW) FAT plans, Hardware (HW) FAT plans, and HW-SW integration plans. Perform coordinated testing between software and hardware and conduct FAT with customers. Build and handles-Built documentation and SAT plans. Perform SAT at customer locations and conduct loop checks on-site. Provide support for startup and commissioning activities. Be responsible for the coordination of lead age initiatives. Quality Control Assurance Implementation of EEEC IMS processes/documentation as when required throughout the project. Adopts to WA quality requirements and Customer s regulatory guidelines Practices and promotes First time right approach. Rigorously follows GDP (Good Documentation Practices). Other Duties Perform other additional specific duties, when requested by the business. These will, typically, be strategic in nature but could potentially be anything that the post holder is suitably qualified and experienced to undertake. These duties may be assigned to the person under mentorship of a supervisor. Who You Are: You promote high visibility of shared contributions to goals. You quickly and significantly take action in constantly evolving, unexpected situations. You actively seek advice from pertinent sources to make timely and well-informed decisions. You handle the risk that comes with moving forward when the outcome is not certain. For This Role, You Will Need: 5-8 years of relevant work experience in the field of process control and automation. DCS/SIS Design experience in Engineering Industry is desired. Preferably worked on Oil Gas, Refineries, Chemical, Petrochemical DCS/SIS design engineering projects. Preferred Qualifications that Set You Apart: Must be a bachelor graduate in Instrumentation, Electronics, Electronics Telecommunication. Our Culture Commitment to You At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. .

Embark on a transformative journey as a Software Engineer -Integration (cloud) at Barclays, where youll spearhead the evolution of our digital landscape, driving innovation and excellence. Youll harness cutting-edge technology to revolutionize our digital offerings, ensuring unapparelled customer experiences. Operational Support Systems (OSS) Platform Engineering is a new team within the newly formed Network OSS Tools functional unit in the Network Product domain at Barclays. The Barclays OSS Platform Engineering team is responsible for the design, build and run of the underlying OSS infrastructure and toolchain across cloud and on-prem that the core systems and tools required to run the Barclays Global Network reside on. To be successful as a Software Engineer- Integration (cloud), you should possess the following skillsets: Deep Expertise in Cloud platforms (AWS, Azure or GCP) infrastructure design and cost optimization. An expert in containerization and Orchestration using dockers and Kubernetes (deployments, service mesh etc. ) Hands-on expertise with platform engineering and productization (for other app consumption as tenants) of opensource monitoring/logging tools (Prometheus, Grafana, ELK and similar) and cloud-native tools based. Strong Knowledge and demonstrable hands-on experience with middleware technologies (Kafka, API gateways etc) and Data Engineering tools/frameworks like Apache Spark, Airflow, Flink and Hadoop ecosystems. Some other highly valued skills include: Expertise building ELT pipelines and cloud/storage integrations - data lake/warehouse integrations (redshift, BigQuery, Snowflake etc). Solid understanding of DevOps tooling, GitOps, CI/CD, config management, Jenkins, build pipelines and source control systems. Working knowledge of cloud infrastructure services: compute, storage, networking, hybrid connectivity, monitoring/logging, security and IAM. SRE Experience. Expertise building and defining KPI s (SLI/SLO s) using open-source tooling like ELK, Prometheus and various other instrumentation, telemetry, and log analytics. You may be assessed on the key critical skills relevant for success in role, such as risk and controls, change and transformation, business acumen strategic thinking and digital and technology, as well as job-specific technical skills. This role is based in our Pune office. Purpose of the role To design, develop and improve software, utilising various engineering methodologies, that provides business, platform, and technology capabilities for our customers and colleagues. Accountabilities Development and delivery of high-quality software solutions by using industry aligned programming languages, frameworks, and tools. Ensuring that code is scalable, maintainable, and optimized for performance. Cross-functional collaboration with product managers, designers, and other engineers to define software requirements, devise solution strategies, and ensure seamless integration and alignment with business objectives. Collaboration with peers, participate in code reviews, and promote a culture of code quality and knowledge sharing. Stay informed of industry technology trends and innovations and actively contribute to the organization s technology communities to foster a culture of technical excellence and growth. Adherence to secure coding practices to mitigate vulnerabilities, protect sensitive data, and ensure secure software solutions. Implementation of effective unit testing practices to ensure proper code design, readability, and reliability. Vice President Expectations To contribute or set strategy, drive requirements and make recommendations for change. Plan resources, budgets, and policies; manage and maintain policies/ processes; deliver continuous improvements and escalate breaches of policies/procedures. . If managing a team, they define jobs and responsibilities, planning for the department s future needs and operations, counselling employees on performance and contributing to employee pay decisions/changes. They may also lead a number of specialists to influence the operations of a department, in alignment with strategic as well as tactical priorities, while balancing short and long term goals and ensuring that budgets and schedules meet corporate requirements. . If the position has leadership responsibilities, People Leaders are expected to demonstrate a clear set of leadership behaviours to create an environment for colleagues to thrive and deliver to a consistently excellent standard. The four LEAD behaviours are: L - Listen and be authentic, E - Energise and inspire, A - Align across the enterprise, D - Develop others. . OR for an individual contributor, they will be a subject matter expert within own discipline and will guide technical direction. They will lead collaborative, multi-year assignments and guide team members through structured assignments, identify the need for the inclusion of other areas of specialisation to complete assignments. They will train, guide and coach less experienced specialists and provide information affecting long term profits, organisational risks and strategic decisions. . Advise key stakeholders, including functional leadership teams and senior management on functional and cross functional areas of impact and alignment. Manage and mitigate risks through assessment, in support of the control and governance agenda. Demonstrate leadership and accountability for managing risk and strengthening controls in relation to the work your team does. Demonstrate comprehensive understanding of the organisation functions to contribute to achieving the goals of the business. Collaborate with other areas of work, for business aligned support areas to keep up to speed with business activity and the business strategies. Create solutions based on sophisticated analytical thought comparing and selecting complex alternatives. In-depth analysis with interpretative thinking will be required to define problems and develop innovative solutions. Adopt and include the outcomes of extensive research in problem solving processes. Seek out, build and maintain trusting relationships and partnerships with internal and external stakeholders in order to accomplish key business objectives, using influencing and negotiating skills to achieve outcomes.

Job Title: Piping Engineer Location: Head Office Company: LR Energy Job Type: Full-time About Us LR Energy is a leader in the renewable energy sector, focusing on sustainable solutions including Compressed Biogas (CBG), solar power, and water treatment projects. Our team is dedicated to providing innovative and environmentally friendly solutions across India. Job Overview We are seeking a skilled and experienced Piping Engineer with a Bachelor's degree in Mechanical Engineering and a minimum of 5 years of relevant experience . The role involves the design, layout, and specification of piping systems, primarily for refinery and process plant projects. The ideal candidate should have a deep understanding of piping engineering standards and strong project coordination skills. Key Responsibilities Design and develop piping systems and layouts for process plants and refinery operations. Prepare and review Piping and Instrumentation Diagrams (P&IDs), isometrics, and piping GA drawings. Ensure compliance with piping codes, standards, and project specifications. Conduct material selection, pipe stress analysis, and support design. Coordinate with multidisciplinary teams, including civil, mechanical, and instrumentation engineers. Estimate material requirements and support procurement activities. Monitor site installation activities and ensure alignment with design specifications. Troubleshoot piping-related issues during construction and commissioning phases. Maintain comprehensive documentation, including drawings, technical reports, and inspection records. Stay updated on piping engineering trends, tools, and best practices. Qualifications Bachelor’s degree in Mechanical Engineering or related field. Minimum of 5 years of experience in piping design and engineering, preferably in the refinery or process plant sector. Proficiency in software such as AutoCAD, PDMS, CAESAR II, or equivalent. Strong knowledge of piping codes (ASME, ANSI, API, etc.). Experience in pipe routing, material specification, and stress analysis. Ability to interpret technical drawings and P&IDs. Strong analytical and problem-solving skills. Excellent coordination and communication abilities. What We Offer Competitive salary and benefits package. Opportunities for professional development and career growth. A supportive and innovative work environment. The chance to contribute to impactful renewable energy projects. How To Apply LR Energy Careers LR Energy is an equal opportunity employer. We embrace diversity and are committed to creating an inclusive workplace for all employees. Show more Show less

Lead Control Engineer Experience: 5 - 8 Years Exp Salary: Competitive Preferred Notice Period: Within 60 Days Opportunity Type: Onsite (Noida, Delhi, Haryana) Placement Type: Full-time (*Note: This is a requirement for one of Uplers' Clients) Must have skills required : PLC programming, VFD, HMI Design, BOM Creation, Motors, sensor, communication protocol, Site Management Addverb (One of Uplers' Clients) is Looking for: Lead Control Engineer who is passionate about their work, eager to learn and grow, and committed to delivering exceptional results. If you are a team player, with a positive attitude and a desire to make a difference, then we want to hear from you. Role Overview Description Role Department Control Engineer/Lead Control Engineer R&D Controls Reports To Senior Manager/Chief Manager Purpose of the role The incumbent will be responsible to develop new products or suggest required changes or improvements in our existing products based. The person must understand the basics of mechanics and suggest appropriate control element. Must actively participate in testing of in-house products and if required should visit the customer site to support the project team. Technical Skills Required Knowledge of motor selection, motor controller and programming Knowledge of sensors, wiring basics, load calculation & OPC server Knowledge of various Industrial networking protocols Profinet, Profibers, device net, device sizing & commissioning Must have worked on PLC programming, SCADA/HMI Basic idea about industrial standards and certifications Behavioral Skills Required Logical thinking approach towards problem solving Delivers sustainable results, stays focused even in challenging situations and overcomes obstacles Effectively communicate and partner with teammates and cross-functional teams Efficient time management and organization skills Flexible to adapt to same-day and next-day changes to project scope and location A commitment to engineering excellence & knowledge of latest technologies Job Responsibilities Interact with various stakeholders (Customers, Vendors, Cross Functional Teams) to get a detailed insight into solution requirements. Conceptualize and operationalize the solution and document them for development and ensure that latest technology being used for the development. Finalization of the solution with stakeholders and then finding the vendors based on technical required along with the SCM team and arrangement of POC’s for vendors. Release engineering BOM as per the internal process. To actively work in prototyping development and ensure prototype testing. Handle the issues reported by After Sales Team and provide the necessary support. Get involved with the after-sales team to get to know the product performance deployed at the customer site and bring improvements if required. Maintain the documentation of products and projects as per the company process. Train & develop the fresh talent in the organization. Minimum Qualification Bachelor's degree in Mechatronics, Instrumentation, Electrical Engineering, or equivalent experience – 60% and above throughout. About Uplers: Our goal is to make hiring and getting hired reliable, simple, and fast. Our role will be to help all our talents find and apply for relevant product and engineering job opportunities and progress in their career. (Note: There are many more opportunities apart from this on the portal.) So, if you are ready for a new challenge, a great work environment, and an opportunity to take your career to the next level, don't hesitate to apply today. We are waiting for you! Show more Show less

Looking for challenging role? If you really want to make a difference - make it with us Can we energize society and fight climate change at the same time? At Siemens Energy, we can. Our technology is key, but our people make the difference. Brilliant minds innovate. They connect, create, and keep us on track towards changing the world’s energy systems. Their spirit fuels our mission. Our culture is defined by caring, agile, respectful, and accountable individuals. We value excellence of any kind. Sounds like you? The job opening is for a Parts Engineer who will be responsible for the inventory or spare and replacement parts management for Aeroderivative Gas turbines globally. The candidate is an engineer with or without inter-disciplinary understanding of Mechanical/Electrical/ Instrumentation & Controls. The position is based in Gurgaon and involves collaboration with Siemens Energy in the USA and the UK. Prior to the start of work, all the relevant tools and process training will be provided. This position would require flexibility and great attitude towards learning. You also support our leaders in their communication activities and cultural transformation activities. Snapshot of your day. We at SEIL are seeking a highly knowledgeable and experienced Commodity Expert specializing in the civil domain, with a strong emphasis on Environment, Health, and Safety (EHS), to join our dedicated team. This crucial role will be responsible for providing in-depth market intelligence, strategic sourcing guidance, and expert knowledge related to commodities essential for our civil engineering and construction projects, all while prioritizing EHS considerations. The ideal candidate will possess a comprehensive understanding of site works, maintain a strong grasp of the Indian construction market dynamics, and, most importantly, demonstrate a commitment to integrating EHS principles into all aspects of commodity procurement and utilization. You will play a pivotal role in optimizing our procurement strategies, mitigating risks (including EHS-related risks), ensuring cost-effective and safe project execution, and promoting sustainable practices. Your new role – challenging and future- oriented: Research Problem Reports (Typical small-scale tasks/projects requiring Parts engineering work and support) Contact OEMs & Suppliers, clearly understand what there is in their scope and what is outside the scope. Work with internal Siemens Energy groups (i.e. Supply Chain, Parts Application Engineers, and Parts Definition Engineers) to gather information on Problem Reports Prepare Datasheets/ Specification forms, Comparison sheets, need to research available for existing part in project archives in EDA portal, project folder and PLM for a detailed description of parts and systems. Need to Obsolete the earlier part if we are replacing the part clearly mentioning the difference in form, fit and function including certification details. Analytical Skills: Use your analytical prowess to foresee potential issues with suggested part by OEM’s. Attention to Detail: You must have an eye for detail what work you are delivering; it should be correct with no quality issues in details. Excellent Communication & Multilingual Skills: Excellent communication skills, especially in dealing with suppliers and team members from different regions who may or may not be proficient in English. Multitasking: Ability to handle multiple tasks simultaneously, prioritizing effectively to ensure smooth operations. Methodological approach: The role's requirements and responsibilities are to be structured, systematic manner. This approach ensures clarity, precision, and comprehensiveness. Presentability: Maintain professionalism all the time, ensuring effective and respectful interactions with colleagues, suppliers, and clients. Innovative Thinking: Bring innovative solutions to the table, inspired by the ingenuity of mythological inventors. Analyzing customer needs and industry best practices to identify and prioritize strategic initiatives and opportunities. Deliver value to the customers and the organization as well as orchestrating the implementation. We don’t need superheroes, just super minds: Engineering degree with basic understanding of Mechanical Engineering. 5+ years of experience in engineering or Commissioning of Gas turbines or balance of plant. Ability to interpret P&IDs, Schematics, Basic parts specifications, and certifications etc. 2D drafting via NX and Siemens Energy Teamcenter (PLM 2020) are considered a plus. Good command of English high level of communication would be required, majority of work will involve liaising with various OEMs internationally to verify product specifications. Interpreting technical drawings, specifications, and standards to ensure correct part selection. Comparing alternatives based on material properties, tolerances, and compatibility. Experience in Oil and Gas or Power sector projects is desirable. Ability to work effectively in a complex, dynamic, and multicultural environment. A proven track record in Lean, Change Management and employee Communication activities (Lean / Change Management certification is considered a plus). Strong communication skills and persuasiveness, coupled with a confident demeanor and sharp business acumen. Well-developed organizational skills, teamwork, and attention to detail with ability to prioritize, multi-task and meet deadlines. Proven track record of delivering results. We’ve got quite a lot to offer. How about you? This role is based at Site (Gurgaon). You’ll also get to visit other locations in India and beyond, so you’ll need to go where this journey takes you. In return, you’ll get the chance to work with teams impacting entire cities, countries – and the shape of things to come. We’re Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality, and we welcome applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and imagination and help us shape tomorrow. Show more Show less

Overview About Ripik.AI Ripik.ai is a fast-growing industrial AI SAAS start-up founded by IIT D/ BITS alumni and with extensive experience in McKinsey, IBM, Google and others. It is backed by marquee VC funds like Accel, Venture Highway and 25+ illustrious angels including 14 unicorn founders. Ripik.ai builds patented full stack software for automation of decision making on the factory floor. Today, they are deployed at more than 15 of the largest and most prestigious enterprises in India including the market leaders in steel, aluminium, cement, pharma, paints, consumer goods and others. It is one of world’s very few AI product start-ups to be a partner to GCP, Azure and AWS. We are also the AI partner of choice for CII, ICC and NASSCOM. Roles & Responsibilities We are looking for a competent and driven DCS Engineer with 4–5 years of experience in Siemens S7- 400 and ABB DCS systems. The role demands hands-on expertise in project development, DCS configuration, system commissioning, and strong knowledge of OT/IT networking and OPC communication protocols. This position will support the execution of industrial automation projects across various process industries. Design, configure, and implement Distributed Control Systems using Siemens S7-400 (PCS7) and ABB DCS 800xA platforms. Develop and review functional and technical documentation (FDS, C&E, loop diagrams, I/O lists, etc.). Configure and integrate HMI/SCADA systems, logic programming, alarms, trends, and historians as required. Lead or support at all stages of the automation project lifecycle: design, development, testing (FAT/SAT), and on-site commissioning. Design and troubleshoot OT (Operational Technology) networks, including layered architectures, VLANs, and segregation between OT and IT zones. Implement and manage OPC (DA/UA/HDA) and other industrial protocols like Profibus, Profinet, Modbus TCP/RTU, Ethernet/IP for PLC-DCS or SCADA integrations. Collaborate with cross-functional teams including instrumentation, electrical, and IT networking teams. Conduct system diagnostics, performance tuning, and provide post-commissioning support. Ensure compliance with project specifications, industry standards, and cybersecurity best practices. Maintain accurate records, backups, and change logs for all DCS-related modifications. Required Skills, Competencies & Experience Bachelor’s Degree or Diploma in Instrumentation, Electronics, Electrical Engineering, or related field. 4–5 years of relevant experience working with: Siemens S7-400 / PCS7 DCS & ABB DCS (800xA Seires). Strong understanding of DCS and PLC architectures, field instrumentation, and process control concepts. Proficiency in industrial communication protocols, especially: OPC DA/UA/HAD, Profibus/Profinet Modbus TCP/RTU & Ethernet/IP. Hands-on experience with OT/IT network architectures, including firewall and switch configurations, IP addressing, and basic routing. Experience in integrating DCS with third-party systems, PLCs, and enterprise-level applications. Ability to work independently on-site during commissioning and troubleshoot control systems. Strong communication skills and a collaborative attitude. Preferred Qualification Knowledge of cybersecurity in OT environments (ISA/IEC 62443 awareness). Familiarity with SCADA, Historian systems, or MES integration. Exposure to virtualization, server-client architecture, or redundant systems. Knowledge of video analytics, CCTV integration, and industrial automation security. Physical Requirements Ability to travel to project sites and conduct field inspections. Comfortable working in hazardous industrial environments (oil refineries, chemical plants, etc.) What can you expect? Ability to shape the future of manufacturing by leveraging best-in-class AI and software; we are a unique organization with niche skill set that you would also develop while working with us World class work culture, coaching and development Mentoring from highly experienced leadership from world class companies (refer to Ripik.AI website for details) Location – Noida (Work from Office) Show more Show less

At Tetra Pak we commit to making food safe and available, everywhere; and we protect what's good – protecting food, protecting people, and protecting the planet. By doing so we touch millions of people's lives every day. And we need people like you to make it happen. We empower you to reach your potential with opportunities to make an impact to be proud of – for food, people and the planet. Job Summary Tetra Pak Business Stream Ice Cream (BSIC) develops and manufactures processing solutions, equipment, and fillers for customers in the ice cream industry worldwide. Our centers of excellence are located in Denmark, China, and India. The BSIC facility in Chakan, Pune, focuses on designing and manufacturing processing solutions for the South Asia market, with a strong export presence. We are seeking a skilled and motivated Electrical Engineer to join our BSIC Operations Engineering team in India. In this role, you will contribute to the design and delivery of electrical and automation hardware solutions tailored to diverse product types and customer requirements. You will bring 4–5 years of experience in electrical/automation hardware engineering, including control panels, instrumentation, and cable sizing. Experience with both simple and complex processing units, as well as full process lines, is essential. A strong understanding of customer needs and the specific demands of the liquid food industry is highly valued. What You Will Do As our Electrical Engineer you will be responsible for; Design electrical and control systems based on customer specifications throughout the order process Engineer and design electrical, instrumentation, and automation hardware Participate in all phases of customer projects, including sales support, design, workshop testing, and commissioning support Conduct machine testing at the production center Collaborate with process and mechanical design teams to meet integrated project requirements Prepare and release design documentation in accordance with corporate standards and timelines Revise and update designs based on test results and feedback Ensure adherence to project schedules, cost estimates, and quality standards Engage with cross-functional teams and stakeholders across geographies We believe you have Bachelor’s degree in Electrical Engineering, Instrumentation Engineering, or a related field 3–5 years of hands-on experience in electrical and automation systems Proficiency in testing and commissioning of process units; understanding of automation software is an advantage Strong communication skills, both written and verbal Ability to work independently and collaboratively in a team environment Commitment to quality, cost-efficiency, and timely delivery Openness to learning and applying new technologies We Offer You A variety of exciting challenges with ample opportunities for development and training in a truly global landscape A culture that pioneers a spirit of innovation where our industry experts drive visible results An equal opportunity employment experience that values diversity and inclusion Market competitive compensation and benefits with flexible working arrangements Apply Now If you are inspired to be part of our promise to protect what’s good; for food, people, and the planet, apply through our careers page at https://jobs.tetrapak.com/. This job posting expires on 30/06/2025. If you have any questions about your application, please contact Wicha Sribanyen . Diversity, equity, and inclusion is an everyday part of how we work. We give people a place to belong and support to thrive, an environment where everyone can be comfortable being themselves and has equal opportunities to grow and succeed. We embrace difference, celebrate people for who they are, and for the diversity they bring that helps us better understand and connect with our customers and communities worldwide. Show more Show less

At Tetra Pak we commit to making food safe and available, everywhere; and we protect what's good – protecting food, protecting people, and protecting the planet. By doing so we touch millions of people's lives every day. And we need people like you to make it happen. We empower you to reach your potential with opportunities to make an impact to be proud of – for food, people and the planet. Job Summary Tetra Pak Business Stream Ice Cream (BSIC) develops and manufactures processing solutions, equipment, and fillers for customers in the ice cream industry worldwide. Our centers of excellence are located in Denmark, China, and India. The BSIC facility in Chakan, Pune, focuses on designing and manufacturing processing solutions for the South Asia market, with a strong export presence As a Mechanical Engineer at BS Ice Cream, you will play a key role in designing and standardizing innovative skid-based modules using Autodesk Inventor. You'll collaborate with global teams on both implementation and early-stage projects. This exciting opportunity, based in India, offers the chance to make a meaningful impact in a dynamic, international environment What You Will Do As our Mechanical Engineer you will; Interpret and analyze process and utility Piping and Instrumentation Diagrams (P&IDs) Develop detailed 3D models using Autodesk Plant 3D, Autodesk Inventor, and CREO Contribute to tank design, where applicable (experience in this area is considered an advantage) Prepare precise 2D installation layouts, including equipment positioning and pipe rack arrangements Lead the standardization of skid-based module designs Coordinate with the fabrication team to gather technical requirements and deliver accurate 3D/2D drawings and Bills of Materials (BOMs) Liaise with external stakeholders, suppliers, and customers to resolve technical queries and ensure alignment Review engineering models and drawings in collaboration with site installation teams Ensure adherence to quality standards and project timelines throughout the project lifecycle Provide on-site support for installation activities and attend project-related meetings as required Represent Tetra Pak with professionalism and uphold the company’s standards in all technical engagements We believe you have A university degree in Mechanical Engineering, Chemical Engineering, or Food Technology Engineering. 5–7 years of full-time, relevant experience, ideally within the dairy, beverage, or pharmaceutical industries. Proven expertise in piping engineering, with a strong understanding of the design and assembly of process equipment and machinery. Solid technical knowledge of installation requirements and customer operations on-site. Familiarity with all phases of project delivery, including commissioning. Willingness to learn and adopt new technologies. Demonstrated project management skills, with the ability to work independently. A collaborative mindset and the ability to engage effectively with stakeholders across multiple geographies. We Offer You A variety of exciting challenges with ample opportunities for development and training in a truly global landscape A culture that pioneers a spirit of innovation where our industry experts drive visible results An equal opportunity employment experience that values diversity and inclusion Market competitive compensation and benefits with flexible working arrangements Apply Now If you are inspired to be part of our promise to protect what’s good; for food, people, and the planet, apply through our careers page at https://jobs.tetrapak.com/. This job posting expires on 30/05/2026. If you have any questions about your application, please contact Wicha Sribanyen . Diversity, equity, and inclusion is an everyday part of how we work. We give people a place to belong and support to thrive, an environment where everyone can be comfortable being themselves and has equal opportunities to grow and succeed. We embrace difference, celebrate people for who they are, and for the diversity they bring that helps us better understand and connect with our customers and communities worldwide. Show more Show less

Why Join Siemens? At Siemens, you will be part of a global leader committed to innovation, quality, and excellence. This role offers the opportunity to work on challenging projects, develop professionally, and make a significant impact in the electrical and instrumentation domain, particularly within power plant and renewable energy projects. If you are passionate about leading a talented team and driving technical excellence, we encourage you to apply. As Siemens Energy, "We energize society" by supporting our customers to make the transition to a more sustainable world, based on innovative technologies and our ability to turn ideas into reality. We do this by: Expanding renewables Transforming conventional power Strengthening electrical grids Driving industrial decarbonization Securing the supply chain and necessary minerals Job Requirements: A Snapshot of Your Day Your key responsibility is to project manage finance digitalization solutions to secure sustainable quality, efficiency, and performance together with the entire finance organization. By supporting our teams implementing state-of-the-art technology, you will lead projects that build user-centric solutions to enable our joint digital transformation journey. How You’ll Make An Impact Manage end-to-end digitalization projects within the finance organization, from concept to delivery. Facilitate Agile ceremonies, including daily stand-ups, sprint planning, and retrospectives, to promote team collaboration and continuous improvement. Assist project teams in effectively using project management tools (e.g., Jira). Monitor engagement, accuracy, and timely updates including comments, statuses, and documentation. Identify and proactively remove obstacles to ensure smooth workflow and timely delivery of milestones. Support change management initiatives, equipping teams to adapt to new processes and digital solutions. Build strong relationships with business stakeholders, understanding their needs and translating them into sustainable digital solutions. What You Bring Expert knowledge and practical experience in both Agile and traditional project management methodologies. Strong understanding of finance processes (e.g., record to report, purchase to pay, order to cash). Proficiency in digital tools such as Alteryx, SAP Analytics Cloud, Power BI, Tableau, Snowflake, Jira, Confluence, or similar solutions. Excellent communication abilities focusing on collaboration and empathy. Proficient in English (spoken and written). Relevant formal certification (e.g., SCRUM, PMP) required. Bachelor’s degree or equivalent professional experience About The Team Our Transformation of Industry division is decarbonizing the industrial sector. Increasing electrification and efficiency are key and demand for green H2 and derivative fuels will rise. We enable decarbonization of the industrial sector and the transition to sustainable processes, building on a strong industrial customer base, a global network, diverse technologies, and integrated execution capabilities. We’ve got quite a lot to offer. How about you? We’re Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality, and we welcome applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and imagination and help us shape tomorrow. Show more Show less

Job Requirements Creation of Electrical schematics, Layout design & cable generation using SEE Electric software as per Standards. Generation of part list and cable list from SEE Electric software. Should be able to select breakers, Sensors, Drives, motors, safety devices according to the required safety Pl level. Collecting all project inputs, Specifications from cross functional teams and defining automation architecture of Machine based on the requirement. Selection of PLC Controllers and VFD and Servo drives and IO modules. Develop projects using Rockwell Automation Studio 5000 Application Code Manager (ACM) Create the PLC programing and HMI screens for the given requirement with Rockwell RS Logix, Studio 5000 & Factory Talk View as per standards. Parametering and Programming of Nidec Drives (Unidrive Sp, M- Drives and Digitex drives(M750)), Rockwell Kinetix drives. Should be able to integrate devices such as Analog sensors, RFID, Barcode readers and Robots with PLC using Communication protocols such as Modbus TCP/IP, Profibus, Profinet. Perform document creation, Revision, Releasing in Team Center software. Work Experience Knowledge of Rockwell Compact Logix and Compact Guard Logix 5380 PLC’s, PowerFlex, Kinetix K5700 drives. Knowledge in Parametering and troubleshooting of Nidec Drives (Unidrive Sp, M- Drives and Digitex drives(M750)), Knowledge in Parametering and troubleshooting of Rockwell drives Kinetix drives. Strong Programming knowledge (Ladder, SFC, CFC, IL, FBD, ST) Excellent Problem solving and analytical skills with ability to understand and upgrade legacy machines. Knowledge in Standard IEC 61131 PLC Programming Strong Knowledge of Electrical Standards & symbols, Pneumatic symbols Experience in Siemens Step 7-300/400/400H/1200/1500, WinCC, TIA Portal, Sinamics and Simotion will be an advantage. Must have good knowledge of Microsoft office tools. Qualification: BE/B.Tech (Electrical and Electronics Engineering /Electrical and Instrumentation /Electronics and Communication) Show more Show less

Job Description In This Role, Your Responsibilities Will Be: Key account management Take ownership of individual booking/target. Achieve budgets for a given year. Target customers, install base with various solution offerings. Work closely with the region team, channels/distributors, industry verticals, and lifecycle services. Develop new ESPs and OEMs for incremental growth. Drive business development and market engagement, and build a funnel around uncovered markets and geographies. Who You Are: Technically minded with a minimum of six to fifteen years of relevant work experience. Experience in selling pneumatic products and field instruments such as solenoid valves, proximity sensors, and pressure regulators. Knowledge of valve automation . Understanding the offerings of Competition Industry knowledge for process industries, chemical, power, etc. Overall Market knowledge, Customers etc. For This Role, You Will Need: Proficient in English, both spoken and written. Knowledge of computer based administrative systems (Outlook, Word, Excel, Oracle) Knowledge of products within pre-defined scope of business unit Ability to adapt quickly to new situations and/or circumstances. Work well within a team. Ability to meet people with confidence and reservation. Preferred Qualifications That Set You Apart: BE/B-Tech in Instrumentation/Mechanical/Electrical Degree. At least 6 to 15 years of working experience in a similar field. Our Culture & Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives—because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams working together are key to driving growth and delivering business results. We recognize the importance of employee well-being. We prioritize providing competitive benefits plans, a variety of medical insurance plans, an Employee Assistance Program, employee resource groups, recognition, and much more. Our culture offers flexible time-off plans, including paid parental leave (maternal and paternal), vacation, and holiday leave. Show more Show less

Do you want to be part of a business that genuinely values entrepreneurialism , innovation and individual accountability? We focus on our customers and are proud of the difference our technology makes. We partner with some of the biggest manufacturing companies in the world and our technical innovations are used to enhance well-known brands across multiple industries. The position - Job Title: Software Development Engineer in Test (SDET) – Embedded Systems & Desktop Integration We are seeking a technically strong and automation-savvy Software Development Engineer in Test (SDET) to join our dynamic product testing team.based in Chennai (India). This team is part of a bigger global R&D team. In this role, you will design, develop, and execute robust test solutions for embedded software systems interfacing with desktop applications that reports out data, signals, and graphs along with post analysis . You’ll work across firmware, APIs, and GUI layers , owning the quality process end-to-end — from test strategy to automation implementation and result analysis — with a focus on performance, accuracy, and reliability.You will work as part of a global R&D team supporting HBM Genesis High Speed, LanXi and Fusion products. HBK products contribute to a variety of applications across technology sectors such as: Automotive, Electric Drives & Generator, Aerospace, Energy / High-Voltage, Material Testing and Service. This will include manual and predominantly automated testing of the application and overall system. You will be responsible for: Own the test strategy, planning, and execution for system-level, functional, regression, and performance testing. Design, develop, and maintain automated test frameworks for embedded software interacting with desktop applications.Work in conjunction with the global Verification & Validation team to drive and align HBK global processes and standards. Setting up of automated system tests for new feature testing and ensuring those system tests remain up and running. Implement desktop UI automation (e.g., signal and graph validation) using tools like Pywinauto, WinAppDriver, or OpenCV-based validation. To contribute in conjunction with other members of the team to ensure all software errors are identified and reported. Monitor system test results and perform first level diagnostics. Assist with resolution and reproduction of user software problems. Contribute to the development and continuous improvement of the software by working in conjunction with software testers and developers based in the Europe. Take on technical leadership responsibilities within an agile product team. Professional Qualifications 3-6 years’ experience in similar previous roles specifically including 2 years’ experience in software testing of data acquisition software, ideally in embedded or real-time systems Strong programming skills in Python or C# – with experience in building test automation frameworks. Experience with automated UI testing of desktop applications (Windows-based) and tools like Pywinauto, AutoIt, WinAppDriver, or similar. Bachelor or master of Engineering or Technology degree in Electrical, Electronics, Communication, Instrumentation, Mechanical, Computer Science or Information Technology. Knowledge of testing processes, tools and methodologies. Knowledge / experience of Agile Software Development & Testing, SAFe (Scaled Agile Framework). Hands-on experience with Jira, Confluence, and version control systems (e.g., Git). Familiarity with signal or waveform validation, data acquisition, or test & measurement systems is a strong plus. Contribute to process improvement, CI/CD pipeline integration, and test data management. Agile or ISTQB Software Test certification would be an advantage. Preferences: Working knowledge of various testing frameworks like Ceedling, GoogleTest, or host-based simulations. Solid understanding of embedded systems and communication protocols We offer Freedom with responsibility is the framework for HBK’s employees. This allows for a good balance between work and family life and for constant development of professional and personal skills in an international and enjoyable working environment. You'll have the space to innovate, architect, and mentor — helping shape the future of embedded QA at HBK. One Company – HBK On 1 January 2019, Brüel & Kjær and HBM merged their activities into a new company called HBK (Hottinger Brüel & Kjær). With more than 3,500 employees worldwide and production facilities in Denmark, Germany, the UK, the USA, China and Portugal and presence in 80 countries, HBK is a leading player in the test and measurement area. For further info please visit www.hbkworld.com. HBK is a division of Spectris plc, a UK-based productivity-enhancing instrumentation and controls company serving leading aerospace, automotive, medical, and other customers. Spectris plc is listed on the London Stock Exchange. Show more Show less

Do you want to be part of a business that genuinely values entrepreneurialism , innovation and individual accountability? We focus on our customers and are proud of the difference our technology makes. We partner with some of the biggest manufacturing companies in the world and our technical innovations are used to enhance well-known brands across multiple industries. The position - Job Title: Software Development Engineer in Test (SDET) – Embedded Systems & Desktop Integration We are seeking a technically strong and automation-savvy Software Development Engineer in Test (SDET) to join our dynamic product testing team.based in Chennai (India). This team is part of a bigger global R&D team. In this role, you will design, develop, and execute robust test solutions for embedded software systems interfacing with desktop applications that reports out data, signals, and graphs along with post analysis . You’ll work across firmware, APIs, and GUI layers , owning the quality process end-to-end — from test strategy to automation implementation and result analysis — with a focus on performance, accuracy, and reliability.You will work as part of a global R&D team supporting HBM Genesis High Speed, LanXi and Fusion products. HBK products contribute to a variety of applications across technology sectors such as: Automotive, Electric Drives & Generator, Aerospace, Energy / High-Voltage, Material Testing and Service. This will include manual and predominantly automated testing of the application and overall system. You will be responsible for: Own the test strategy, planning, and execution for system-level, functional, regression, and performance testing. Design, develop, and maintain automated test frameworks for embedded software interacting with desktop applications.Work in conjunction with the global Verification & Validation team to drive and align HBK global processes and standards. Setting up of automated system tests for new feature testing and ensuring those system tests remain up and running. Implement desktop UI automation (e.g., signal and graph validation) using tools like Pywinauto, WinAppDriver, or OpenCV-based validation. To contribute in conjunction with other members of the team to ensure all software errors are identified and reported. Monitor system test results and perform first level diagnostics. Assist with resolution and reproduction of user software problems. Contribute to the development and continuous improvement of the software by working in conjunction with software testers and developers based in the Europe. Take on technical leadership responsibilities within an agile product team. Professional Qualifications 3-6 years’ experience in similar previous roles specifically including 2 years’ experience in software testing of data acquisition software, ideally in embedded or real-time systems Strong programming skills in Python or C# – with experience in building test automation frameworks. Experience with automated UI testing of desktop applications (Windows-based) and tools like Pywinauto, AutoIt, WinAppDriver, or similar. Bachelor or master of Engineering or Technology degree in Electrical, Electronics, Communication, Instrumentation, Mechanical, Computer Science or Information Technology. Knowledge of testing processes, tools and methodologies. Knowledge / experience of Agile Software Development & Testing, SAFe (Scaled Agile Framework). Hands-on experience with Jira, Confluence, and version control systems (e.g., Git). Familiarity with signal or waveform validation, data acquisition, or test & measurement systems is a strong plus. Contribute to process improvement, CI/CD pipeline integration, and test data management. Agile or ISTQB Software Test certification would be an advantage. Preferences: Working knowledge of various testing frameworks like Ceedling, GoogleTest, or host-based simulations. Solid understanding of embedded systems and communication protocols We offer Freedom with responsibility is the framework for HBK’s employees. This allows for a good balance between work and family life and for constant development of professional and personal skills in an international and enjoyable working environment. You'll have the space to innovate, architect, and mentor — helping shape the future of embedded QA at HBK. One Company – HBK On 1 January 2019, Brüel & Kjær and HBM merged their activities into a new company called HBK (Hottinger Brüel & Kjær). With more than 3,500 employees worldwide and production facilities in Denmark, Germany, the UK, the USA, China and Portugal and presence in 80 countries, HBK is a leading player in the test and measurement area. For further info please visit www.hbkworld.com. HBK is a division of Spectris plc, a UK-based productivity-enhancing instrumentation and controls company serving leading aerospace, automotive, medical, and other customers. Spectris plc is listed on the London Stock Exchange. Show more Show less

Description Amazon Lab126 is an inventive research and development company that designs and engineers high-profile consumer electronics. Lab126 began in 2004 as a subsidiary of Amazon.com, Inc., originally creating the best-selling Kindle family of products. Since then, Lab126 has produced innovative devices like Fire tablets, Fire TV, Amazon Echo and Amazon Echo Show.The Amazon Devices group delivers delightfully unique Amazon experiences, giving customers instant access to everything, digital or physical. Key job responsibilities Responsibilities As the Systems Development Manager, you will lead our critical Test framework and System test app Development team . As our Systems Development Manager, you will have the following responsibilities: Technical Leadership & Architecture Design and implement test solutions for large-scale, complex software systems with a focus on architectural integrity Demonstrate strong coding ability and set high standards through personal implementation contributions Proactively identify and resolve software quality issues, architectural deficiencies, and test framework limitations Provide insightful code reviews that elevate team capabilities and ensure testing excellence Maintain comprehensive knowledge of system components to ensure effective test coverage and integration Team Leadership & Mentorship Lead technical strategy development and establish testing priorities aligned with organizational objectives Participate actively in hiring processes and mentor team members to improve technical skills and effectiveness Guide implementation of engineering best practices including unit testing and continuous deployment Drive improvements in engineering efficiency and resolve root causes of persistent quality issues Communicate technical decisions effectively and facilitate resolution of contentious issues Cross-functional Collaboration & Innovation Demonstrate measurable technical influence across multiple teams beyond your direct responsibility Develop sustainable testing frameworks and approaches that increase productivity across engineering Anticipate potential system failures and implement preventative measures before issues arise Create solutions that remove bottlenecks and enable innovation for dependent teams Balance test coverage metrics with meaningful quality indicators to continuously improve product stability You'll be the driving force behind our Test Framework, infrastructure and App Development Team, architecting robust automation solutions while leading talented engineers to create testing capabilities that impact hundreds of users daily. This pivotal role requires you to balance technical leadership—designing scalable test instrumentation and ensuring seamless performance—with people management responsibilities including mentorship, process improvement, and cross-functional collaboration. You'll champion testing best practices organization-wide, make strategic decisions about test coverage and reliability, and continuously innovate our automation ecosystem to empower all teams to deliver with confidence. About The Team The Device OS team plays a central role in creating innovative devices & services at Lab126. The Device OS team is responsible for the board bring up, low level software, core operating system architecture, innovative framework feature development, associated cloud services and end-to-end system functions that brings these devices to life. The software built by the Device OS team runs on all Amazon consumer electronics devices. The Device OS team also is the center of excellence for developing Cross-OS Software stacks and solutions that helps enable partner teams including developers to drive software convergence and accelerate product development. Basic Qualifications 12+ years software engineering experience, 5+ years experience in engineering management Experience leading the design, automation, deployment, and support of large-scale infrastructure Proven track record in SRE/DevOps leadership Expertise in building React Native and Native applications. Experience with building testing tools and practices Experience in programming with at least one modern language such as Python, JavaScript, Java, C++, C#, Rust Experience with Linux/Unix Experience with CI/CD pipelines build processes Preferred Qualifications Strong background in test automation and Infrastructure as Code. Proven track record of building and mentoring high-performing SDETs/DevOps teams. Experience in supporting/managing global teams. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Company - ADCI - Tamil Nadu Job ID: A2982769 Show more Show less

Job Requirements Knowledge & Skills requirements: Design experience in MV/LV system and associated equipment/design (SLD, Load List, Switchgear, MCC, Motors, UPS, Control Panels, Junction Boxes, BOQ). Responsible for preparation of Electrical Load List, Electrical Single Line Diagrams, Electrical Schematics and Wiring Diagrams and also in modification and re-detailing on Electrical Design Experienced in Cable Sizing and Selection, Equipment Layout Design, Earthing & Lighting Protection Design, Short Circuit & Voltage Drop Calculations. Preparation of Technical Documents like Equipment Specifications/Datasheets. Preparation of Cable Tray/Conduit laying and installation drawingsAbility to develop various substation and power distribution scheme single line diagram. Ability to develop/lead physical substation layouts and coordinate civil and mechanical disciplines. Substation design Scope of Work and specifications development Perform preliminary studies for grounding, lightning protection, arc flash hazard, and other studies required for substation design. Experience in Design calculations for Transformer, Generator Review of Vendor Drawings and Technical Bid Evaluation/Approval Experienced in coordinating with Piping/Mechanical/Instrumentation designer for Electrical Design Interface details Experienced in assisting during installation, testing and commissioning of Electrical System Equipment at site and coordinating with other discipline to support in project work completion Experience of participation in FAT and SAT Familiar with Codes and Standards : ISA, IEC, CSA, NEC(NFPA70) Familiar with Equipment Selection, Electrical Design Guidelines requirements around Electrical Area Classification in Oil and Gas industry Familiarity with instrumentation and process control design for Oil and Gas industry Familiarity with Midstream/Downstream design/engineering processes for Oil and Gas industry Advanced competency with AutoCAD 2D is must, AutoCAD 3D capability would be an added advantage Experience of using engineering tool ETAP for power system analysis would be an added advantage Team player, should work together other Technical disciplines in order to achieve Integrated project Execution Education Work Experience Bachelor/Master of Engineering in Electrical Engineering Show more Show less