The Valve Hydro Testing Technician is responsible for performing hydrostatic and pneumatic (GAS) pressure tests on Ball valves to ensure they meet specified pressure ratings, design standards, and customer requirements. This role involves setting up test equipment, conducting tests, analyzing results, identifying defects, and meticulously documenting all testing activities in accordance with internal procedures and industry standards. Key Responsibilities: • Test Setup and Execution: o Set up and operate hydrostatic and pneumatic testing equipment for Ball Valves o Connect valves to high-pressure air or water lines, ensuring proper sealing and safety precautions are in place. o Activate test pumps or compressors to reach specified internal pressures. o Monitor pressure gauges and test equipment for leaks, pressure drops, or other anomalies. o Apply leak detection solutions (e.g., soap solution) to valve surfaces to identify air leaks. o Perform various types of tests, including shell tests, seat leakage tests, and operational performance tests. • Inspection and Troubleshooting: o Visually inspect valves before, during, and after testing for defects, damage, or signs of wear. o Identify the source of leaks or pressure losses and mark defective areas for subsequent repair. o Troubleshoot testing equipment malfunctions and perform minor maintenance or calibration as required. • Documentation and Reporting: o Accurately record all test results, observations, and findings in designated forms or digital systems. o Prepare detailed test reports, certificates, and other required documentation for internal records and customer submission. o Maintain organized records of valve specifications, test procedures, and historical test data. • Quality and Compliance: o Ensure all testing activities comply with relevant industry standards (e.g., API, ASME, ANSI), company quality procedures, and safety regulations. o Adhere to strict quality control protocols to ensure the integrity and reliability of tested valves. o Participate in internal and external audits related to quality and testing processes. • Maintenance and Housekeeping: o Maintain a clean, organized, and safe work environment in the testing area. o Perform routine checks and preventative maintenance on testing equipment to ensure optimal performance and longevity. o Report any equipment malfunctions or safety hazards to the supervisor immediately. • Collaboration: o Collaborate effectively with production, quality assurance, engineering, and repair teams to address non-conformances and improve processes. o Communicate test results and potential issues clearly and concisely to relevant stakeholders. Qualifications: • Education: High School Diploma or equivalent required. A technical certification or vocational training in mechanical, industrial maintenance, or a related field is highly preferred. • Experience: o 5-6 years of hands-on experience in valve testing, pressure testing, or mechanical assembly/repair in a manufacturing or industrial environment. o Familiarity with various valve types and their functions. • Technical Skills: o Proficiency in operating hydrostatic and pneumatic test benches and related instrumentation (pressure gauges, flow meters, etc.). o Ability to read and interpret engineering drawings, blueprints, schematics, and test specifications. o Strong mechanical aptitude and problem-solving skills. o Basic computer literacy for data entry and report generation. • Soft Skills: o Exceptional attention to detail and accuracy. o Strong commitment to safety procedures and protocols. o Ability to work independently with minimal supervision and as part of a team. o Good communication skills (written and verbal). o Reliability and punctuality. • Physical Requirements: o Ability to stand, walk, lift (up to 50 lbs), bend, and perform repetitive motions for extended periods. o Comfortable working in a manufacturing or workshop environment, which may include exposure to noise, varying temperatures, and industrial equipment. Preferred Qualifications (Nice to Have): • Experience with specific valve industry standards (e.g., API 6A, API 6D, API 598). • Prior experience with ERP/MES systems for tracking production and quality data. Show more Show less

Job Description : We are seeking an Extremely Talented Fresher or Experience candidate to join our team. If you're passionate about Installation Commissioning/Trouble Shooting etc of Process & Analytical Instruments e.g. Gas / Liquid Analyzers, Particulate Monitoring equipment’s, , Flow / Level / Pressure measuring instruments. Roles & Responsibilities: Installation, commissioning, operation, maintenance and troubleshooting of Analytical Air Quality Gas Analyzers, Particulate Monitoring Analyzers, Water Quality Analyzers & other Bhoomi make products. Identifying root cause of failures and implementing quick breakdown solutions to put the equipment back in operation within minimum turnaround time. Involved in the operations, maintenance and troubleshooting of CEMS and Air Quality Monitoring Stations equipped with various Automatic On-line Gas Analysers Monitor and ensure installed Carrying out routine scheduled maintenance work and responding to equipment faults. Ensured spare management for all instruments and analysers also generated, processed & Interpreted air quality data. Involved in the calibration and quality checking of Air Monitoring System. Project Commissioning and Troubleshooting at Client’s end Ensure safety norms are followed during installation and maintenance process. Organized and provided training to the staff of clients. Ensure overall customer satisfaction. Handle customers in professional manner during difficult high-pressure situations Ensure overall customer satisfaction. Qualification - Diploma / Bachelor's degree in Electrical, Electronics and Telecommunication Engineering / Instrumentation or related field Understanding of the latest technologies, trends, and industry standards related to Instrumentation Strong analytical and problem-solving skills are essential for identifying and resolving technical challenges encountered during Product Promotion. Ability to work effectively in a team environment, collaborate with colleagues from different department and contribute to achieving sales goals. Job Type: Full-time Pay: ₹30,000.00 - ₹50,000.00 per month Benefits: Provident Fund Schedule: Day shift Education: Bachelor's (Required) Experience: Field service: 2 years (Required) Location: Baroda, Gujarat (Required) Willingness to travel: 100% (Required) Work Location: In person

Total Experience required - 8+ Years Experience in preparation / review of following design deliverables; Design Basis, Instrumentation & Control system Specifications, Instrument Index and I/O List, Functional loop schematics, Shutdown narratives and Logic Diagrams, Inst. Datasheets, Installation drawings and Hookups, Level Sketch, Inst. Location Lay outs, Cable Tray lay outs, Control room lay outs, Cable and Junction Box Schedule, Wiring and Interconnection drawings, Loop Wiring Diagram, MTO, Construction/Erection Tender etc. Inter-Disciplinary Activities - P&ID review and update, 3-D Model review, IDR/IDC. Hands on Experience following design Calculations; Inst. Sizing - Control Valve Sizing (InstruCalc, CONVAL), Flow meter sizing, Safety valve sizing, Air and power consumption calculations, Intrinsic safety validation calculation, Thermowell Wake freq. calculations. Instrument Selection - All types of field instruments. Exposure to selection of instruments and systems for Hazardous areas. Experience in preparation / review of following procurement deliverables; Material Requisition, TBE, Purchase Requisition and Vendor Drawing Review and approvals for Field Instrumentation and Control Systems. Control Systems - Experience with Control Systems - DCS, ESD (SIS), PLCS, package control systems, Fire & Gas systems (FGS). Control System Specification, Architecture Design, Communication Protocols, FF, Profibus, Modbus etc. Experience with control systems from reputed vendors like Honeywell / Yokogawa / Invensys / Emerson is preferred. Must have worked as Instrumentation Engineer for mid to large scale Chemical / Petrochemical / Oil & Gas projects. Skills: Software Packages (Added advantage) - SPI (In tools), InstruCalc / CONVAL Good communication and mid-level managerial skills along with core technical skills needed. Show more Show less

🚨 WE’RE HIRING – Assistant Manager – EHS (Plant Level) 📍 Ahmedabad & Gandhinagar | 💼 3–6 Years Exp | 💰 ₹5–8 LPA Join Accumax Lab Devices , a global leader in lab instrumentation, and drive safety, compliance, and sustainability at the plant level! 🔹 Key Responsibilities : Safety & environmental compliance (GPCB, audits, CCA) Incident reporting & root cause analysis EHS training & emergency preparedness Hazardous waste management Support sustainability & EcoVadis/ISO audits 🎓 Requirements : Degree in EHS/Safety/Chemical Engg. NEBOSH/OSHA/Indian Safety Diploma GPCB documentation + data reporting EcoVadis experience is a plus 📧 Apply now with the following details : Name, Contact, Location Total & EHS Experience Current & Expected CTC Notice Period, Certifications 👉 Send to : job@accumaxlab.com | career@accumaxlab.com | santosh@accumaxlab.com 🌐 www.accumaxlab.com #EHSJobs #AhmedabadJobs #SafetyCareers #EcoVadis #PlantSafety #GPCB #ComplianceJobs #AccumaxCareers Show more Show less

Scope Of Work* Primary Shared Across Functionally Review / Interpretation / conversion of Technical requirements of a project into engineering deliverable under guidance of Lead. Act as a checker for specific documents assigned by Lead Interact with Vendors and sub-contractor to resolve technical issues during the course of project Post order and pre-order Vendor document review for packages / items assigned by Lead Lead engineering and design of instrumentation Packages which involves multiple discipline Co-ordinate and lead squad checks and Inter-discipline reviews of department engineering outputs Identify inputs and need list from other disciplines Relationships Management* Internal External Interaction with other discipline LEs / Team members and Project Team Interaction with Vendors / Clients / Third party members Key Result Areas* Provide all necessary engineering inputs to designer for preparing construction drawings of instrumentation Ensure Quality checks as per departmental QDs, internal work instruction and company QMS Key Competencies Behavioral Need to Have Nice to Have Communication skills Team Player Technical Need to Have Nice to Have Handle estimation engineering independently with support of other members and guidance of lead Provide inputs for special studies like HAZOP / SIL -Co-ordination with Electrical for E&I Interface and with process for P&I interface Show more Show less

Position Title: Section In-charge – Electrical & Instrumentation (E&I) Qualification & Experience: B.E. / B.Tech in Electrical or Instrumentation Engineering with 18+ years of experience OR Diploma in Electrical or Instrumentation Engineering with 25+ years of experience in project execution and commissioning Job location - Pan India We are seeking a seasoned Electrical & Instrumentation (E&I) professional with hands-on experience in the execution of Rural & Urban Water Supply Projects, including pump houses, Water Treatment Plants (WTP), and Sewage Treatment Plants (STP). The ideal candidate will have in-depth knowledge and experience in electrical & instrumentation systems including commissioning activities in water & sanitation applications. Key Responsibilities Planning, Scheduling and executing the E&I Works within budgeted cost and time with desired quality and safety standards at Water Treatment Plants (WTP) and Sewage Treatment Plants (STP). Handle the installation and commissioning of electrical equipment like motors, transformers, (33kV and above), HT/LT Panels, VFDs/Soft starters, DG Sets, Cabling, Overhead power transmission lines, Sub-stations, Lighting works and power distribution systems at pump houses and treatment plants. Ensure proper installation and commissioning of field instruments like level sensors/indicators/switches, Electromagnetic flow meters, pressure transmitters, pressure gauges, motorized valves, analyzers including UPS and PLC SCADA based automation system. Coordinate with cross-functional teams and provide technical support. Mobilize and manage resources as per project requirements. In-depth understanding of electrical codes and standards, safety regulations, industry best practices, and emerging technologies in the electrical and instrumentation sector. Conduct and oversee pre-commissioning and commissioning checks and generate relevant test reports and as-built documents. Support Operation & Maintenance (O&M) activities post-commissioning during DLP (Defect Liability Period), if required. Key Skills & Competencies Strong knowledge of electrical & instrumentation systems and codes. Practical experience in commissioning PLC/DCS/SCADA systems integrated with field instruments. Ability to read and interpret electrical & instrumentation drawings, BOQs, Cable schedule and technical specifications. Experience with government agencies or EPC contractors on state-sponsored rural water schemes (e.g., Jal Jeevan Mission, AMRUT) is highly desirable. Understanding of public health engineering (PHE) requirements and rural utility standards. Excellent communication skills & problem-solving abilities. Providing leadership, guidance, and mentorship to junior engineers and team members to foster a culture of continuous improvement and learning. Collaborate with various departments such as engineering, operations, supply chain management and maintenance to ensure seamless project execution and operational efficiency. Show more Show less

Job Title: CAD Designer – Cabinet & Field Instrumentation Experience Required: 3+ Years Location: Pune Employment Type: Full-Time Key Responsibilities: Prepare detailed design drawings and documentation for various types of panels , including: Ø System Panels GA/IA & Wiring Drawings (PLC/DCS based) Ø Marshalling Panels GA/IA & Wiring Drawings Ø Power Distribution Panels GA/IA & Wiring Drawings Ø Network Panels (communication, Ethernet, fiber, etc.) Ø JBs and Local Control Panels Generate Field Instrumentation Drawings including: Ø Instrument location layouts Ø Cable routing and tray layouts Ø Instrument hook-up drawings & Bill of Materials (BOM) Ø Installation detail drawings Ø Cable Schedules Ø Terminal Block Diagrams Ø Interconnection Diagrams Coordinate with project teams and provide CAD support through all project phases. Manage drawing revisions, maintain version control, and support documentation for submission and approval. Required Skills & Qualifications: ITI, Diploma or Bachelor's Degree in Engineering or equivalent. Minimum 3 years of experience in cabinet and instrumentation design using CAD tools. Proficient in AutoCAD , AutoCAD Electrical ; exposure to EPLAN , SPI (SmartPlant Instrumentation) , or similar tools is a plus. Proficient in English communication – both written and verbal, for interacting with internal teams, clients, and during documentation. Strong understanding of: Ø Electrical and instrumentation panel design Ø Control system architectures (PLC, DCS, SCADA) Ø Panel wiring practices and layouts Ø Power distribution and communication networks Ability to read and interpret engineering documents and specifications. Preferred Qualifications: Experience in Oil & Gas, Power, Process Automation, or EPC projects. Job Type: Full-time Pay: ₹15,000.00 - ₹50,000.00 per month Benefits: Health insurance Provident Fund Schedule: Monday to Friday Education: Secondary(10th Pass) (Preferred) Location: Hadapsar, Pune, Maharashtra (Preferred) Willingness to travel: 25% (Preferred) Work Location: In person

Scope Of Work* Primary Shared Across Functionally Review / Interpretation / conversion of Technical requirements of a project into engineering deliverable under guidance of Lead. Act as a checker for specific documents assigned by Lead Interact with Vendors and sub-contractor to resolve technical issues during the course of project Post order and pre-order Vendor document review for packages / items assigned by Lead Lead engineering and design of instrumentation Packages which involves multiple discipline Co-ordinate and lead squad checks and Inter-discipline reviews of department engineering outputs Identify inputs and need list from other disciplines Relationships Management* Internal External Interaction with other discipline LEs / Team members and Project Team Interaction with Vendors / Clients / Third party members Key Result Areas* Provide all necessary engineering inputs to designer for preparing construction drawings of instrumentation Ensure Quality checks as per departmental QDs, internal work instruction and company QMS Key Competencies Behavioral Need to Have Nice to Have Communication skills Team Player Technical Need to Have Nice to Have Handle estimation engineering independently with support of other members and guidance of lead Provide inputs for special studies like HAZOP / SIL -Co-ordination with Electrical for E&I Interface and with process for P&I interface Show more Show less

RESPONSIBILITIES AND KEY DELIVERABLES Planning and Design: Collaborating with engineering and design teams, Vendors to develop electrical and instrumentation plans, specifications, and layouts for projects. This includes assessing requirements, conducting feasibility studies, and ensuring compliance with applicable codes and standards. Equipment Selection and Procurement: Identifying and selecting appropriate electrical and instrumentation equipment, materials, and systems required for projects. Coordinating with vendors and suppliers to ensure timely procurement and delivery. Installation and Commissioning: Overseeing the installation, testing, and commissioning of electrical and instrumentation systems. This involves coordinating with contractors, conducting inspections, and ensuring compliance with safety protocols. Troubleshooting and Maintenance: Managing troubleshooting and maintenance activities for electrical and instrumentation systems. This includes diagnosing and resolving equipment failures, coordinating repairs, and implementing preventive maintenance programs for PLC ,Drives and other electrical equipments. Compliance and Safety: Ensuring compliance with relevant electrical and instrumentation codes, regulations, and safety standards. Implementing safety protocols and procedures to minimize risks and maintain a safe working environment. Documentation and Reporting: Maintaining accurate project documentation, including design specifications, installation records, testing reports, and maintenance logs. Generating regular progress reports and providing updates to stakeholders. EXPERIENCE An engineering graduate (Electrical / Instrumentation) with preferably 3 to 5 years of relevant experience with previous hands-on experience in Oil, Gas or chemical Industry. The candidate should be well conversant with Control panels, cabling sizing, Instruments selection, PLC and SCADA programming. INDUSTRY PREFERRED: Oil and Gas, Biogas Industry QUALIFICATION: B.E. Electrical / Instrumentation COMPETENCIES: Technical Expertise Project Management Problem-solving and Troubleshooting Communication and Interpersonal Skills Compliance and Safety Awareness Quality Focus Job Type: Full-time Pay: Up to ₹400,000.00 per year Application Question(s): How much experience do you have in PLC operations? Do you have experience in SCADA machine? What is your current CTC? What is your Education? Are you comfortable to relocate in Sanchore Rajasthan location? Work Location: In person

About Us: Aarohi Embedded Systems Pvt. Ltd. is a leader in embedded product design and development, specializing in calibration and testing services for various industries, including pump manufacturing and wastewater management. Position Overview: We’re looking for a skilled Calibration Engineer with hands-on experience in flow meter calibration (Electromagnetic, Coriolis, Ultrasonic, Orifice, Mass, DP, etc.). Key Responsibilities: Flow meter calibration (ISO/IEC 17025) Calibration rig operation & maintenance Data analysis & certificate documentation Knowledge of industry standards & quality systems Tech support & on-site calibration Qualifications: ITI / Diploma / B.Tech in Mech, Electrical, Electronics or Instrumentation. Minimum 1 Year of relevant experience in calibration or laboratory management. Strong knowledge of NABL standards and excellent leadership skills. Salary - 1.8 – 3.5 LPA (Depending on qualifications & experience) Location- Rajkot, Metoda-GIDC Contact Details, Kashmira R Mehta hr@aarohies.com 6352618815 Show more Show less

Job Title / Position : Sr. Lead Engineer / Principle Engineer Department: Laboratory-TSSC Location: Okhla, New Delhi Minimum Work Experience: 10 Years of firmware testing experience Educational / Technical Qualification: B.E. / B.Tech. in Electrical/Electronics/Instrumentation Professional Qualification: Certification as an ISTQB tester (preferred) Budget: 14-15 LPA "WORK FROM OFFICE ONLY" Overview / Objectives: • Ensuring authenticated / reliable software testing and documentation using agile development method (SCRUM) • Test planning and scheduling for on time completion of allocated projects. • Independent Software testing according to test specifications Independent Firmware and Hardware testing of industrial communication interfaces such as IO-Link according to normative requirements. • Assistance to the development project teams. • Creation of test concepts, test methods and test reports. • Support in preventive and corrective maintenance. • Support in laboratory set- up and maintenance of laboratory Management System as per ISO 17025. • Maintaining and validating test equipment’s to ensure accurate and reliable test results. • Problem Solving: Troubleshooting equipment malfunctions, investigating test failures and implementing corrective actions. • Maintaining inter and intra departmental effective communication. • Identification and maintenance of required competencies Personal Competence • Results-oriented way of working. • Problem Solving • Effective communicator • Planning and organising • Creative thinking Special Requirements (if any) • Good knowledge of programming (C#) • Experience and knowledge with Windows and Linux systems • Good English communication skill Show more Show less

8-18 years of experience with Degree in Instrumentation & Control Engineering having experience of: Field Instrumentation Design: - Experience in preparation / review of following design deliverables; Design Basis, Instrumentation & Control system Specifications, Instrument Index and I/O List, Functional loop schematics, Shutdown narratives and Logic Diagrams, Inst. Datasheets, Installation drawings and Hookups, Level Sketch, Inst. Location Lay outs, Cable Tray lay outs, Control room lay outs, Cable and Junction Box Schedule, Wiring and Interconnection drawings, Loop Wiring Diagram, MTO, Construction/Erection Tender etc. Inter-Disciplinary Activities - P&ID review, 3-D Model review, IDR/IDC Hands on Experience following design Calculations; Inst. Sizing - Control Valve Sizing (InstruCalc, CONVAL), Flow meter sizing, Safety valve sizing, Air and power consumption calculations, Intrinsic safety validation calculation, Thermowell Wake freq. calculations. Instrument Selection - All types of field instruments. Exposure to selection of instruments and systems for Hazardous areas. Experience in preparation / review of following procurement deliverables; Material Requisition, TBE, Purchase Requisition and Vendor Drawing Review and approvals for Field Instrumentation and Control Systems. Control Systems - Experience with Control Systems - DCS, ESD (SIS), PLCs, package control systems, Fire & Gas systems (FGS). Control System Specification, Architecture Design, Communication Protocols, FF, Profibus, Modbus etc. Experience with control systems from reputed vendors like Honeywell / Yokogawa / Foxboro (Schneider) / Emerson is preferred. Other activities: Client meetings and reviews, Site surveys and repor Show more Show less

About Us: Aarohi Embedded Systems Pvt. Ltd . is a leader in embedded product design and development, specializing in calibration and testing services for various industries, including pump manufacturing and wastewater management. Position Overview: We’re looking for a skilled Calibration Engineer with hands-on experience in flow meter calibration (Electromagnetic, Coriolis, Ultrasonic, Orifice, Mass, DP, etc.). Key Responsibilities: Flow meter calibration (ISO/IEC 17025) Calibration rig operation & maintenance Data analysis & certificate documentation Knowledge of industry standards & quality systems Tech support & on-site calibration Qualifications: ITI / Diploma / B.Tech in Mech, Electrical, Electronics or Instrumentation. Minimum 1 Year of relevant experience in calibration or laboratory management. Strong knowledge of NABL standards and excellent leadership skills. Salary - 1.8 – 3.5 LPA (Depending on qualifications & experience) Location - Rajkot, Metoda-GIDC Contact Details, Kashmira R Mehta hr@aarohies.com 6352618815 Show more Show less

About Newen Systems Newen Systems is India’s leading power conversion and energy storage solutions provider, driving energy transition and grid stability. Newen’s state of the art manufacturing facilities at Vadodara is at the heart of driving innovation and GW scale energy revolution for the world. With 3,000+ MW of battery storage deployed across 65+ countries in all seven continents, Newen Systems in technical collaboration with Dynapower is delivering BESS, Green H2, Microgrid and e-mobility infrastructure solutions to customers in India and around the world. Newen’s cutting edge energy management system is helping customers maximize their energy investment in ways it was not imagined earlier. Newen is uniquely positioned globally to provide EMS and PCS under one roof enabling customers to do integration tests within the factory rather than on site saving them time and money. As we expand, we are looking for intrapreneurial talent who have the passion to drive energy transition and deliver solutions to drive sustainability on a global scale Job Summary: Newen is looking for dynamic go-getters who believe in their capability to create a positive impact and wealth for themselves. As a SeniorAutomation Engineer you will be working on high impactprojects and solutionsfor some most sought after industry domains and technologies for making the planet greener. Key Tasks: Design, document, implement and maintain essential SCADA and control systems. Maintain and update industry knowledge and digital developments to support innovation and ongoing optimisation. Ensuring compliance with industry standardsand safety regulations Create application IP - Develop standard function blocks for various use cases Ensure process and system changes are reflected in all relevant documentation and processes. Assist in the development of technical and commercial content of all reports, standards, procedures, and contract documentation in consultation with the team lead Develop and review electrical designs and drawings related to SCADA and Control Equipment Training on the solution to internal teams/ clients Responsible for coordinating and communicating the product capabilities to customers and the in-house team Skills: PLC programming, SCADA programming, IIOT devices, Industria lOT layer communication networks Qualifications: B. Tech/B.E in Electronics/ Electrical/ Instrumentation & Controls Experience: 3+ years of PLC & SCADA systems development, programming and integration Experience with Rockwell/Siemens/ Schneider/ Equivalent PLC hardware Experience with WonderWare system platform, InTouch, or equivalent SCADA Systems Exposure in C# and SQL, relational databases; Python a plus Industrial Communication protocols such as Modbus RTU/TCP,Ethernet IP, PROFINET,OPC-UA, MQTT, IEC61850, DNP3 etc. Exposure in product - development/ certification/ management Show more Show less

Opportunity to lead end-to-end Distillery Operations for a large scale facility Opportunity to work and lead a large scale greenfield Distillery project About Our Client Our client is a large scale Indian Conglomerate with diversified business units and touchpoints across the country. Client is expanding their presence in Distillery domain and setting up new greenfield project. Job Description We are seeking a dynamic and results-driven Distillery Site Head to lead the operations of our high-capacity distillery plant (200+ KLPD) in North India. This is a critical leadership position responsible for overseeing the entire plant operations - from production and maintenance to compliance and profitability. The ideal candidate will possess extensive experience in distillery operations, government liaisons, tendering processes, and cross-functional team leadership. Lead and manage all aspects of daily plant operations ensuring uninterrupted, safe, and compliant distillery production. Achieve production targets in line with quality and environmental standards. Monitor key operational parameters and implement corrective actions to minimise downtime and ensure high OEE (Overall Equipment Efficiency) Lead technical evaluation and coordination for all major capex and opex tenders related to plant machinery, utilities, and services. Represent the company in all interactions with local and state government bodies including Excise, Pollution Control Board, and Factory Inspectorate Oversee preventive and corrective maintenance schedules in coordination with Mechanical and Instrumentation Heads. The Successful Applicant Education: B.Tech / B.E. (Mechanical, Chemical, or related); MBA is a plus. Experience: 20+ years in distillery/ethanol/chemical plant operations, with at least 8+ years in a plant head or senior leadership role. Proven experience in managing large distillery units (preferably 200+ KLPD capacity). Strong knowledge of distillery technology (molasses/grain-based), utilities, and control systems. Hands-on experience in managing government liaisons and statutory compliance. Sound understanding of tendering, project execution, and vendor management. Strong leadership, interpersonal, and problem-solving skills. What's On Offer Distillery Leadership opportunity Great career growth Contact: Abhay Gadhvi Quote job ref: JN-062025-6759585 Show more Show less

Job Description In This Role, Your Responsibilities Will Be: Implement to Emerson’s project execution life cycle and maintain all relevant documentation, including technical and quality documents. Own the project and act as the primary connect with the customer for the entire scope of the project. Provide technical support to the Project Manager, assisting with activities such as scope reviews, kickoff meetings, resource planning, engineering planning, procurement support, schedule planning, quality control, project monitoring and control, customer interaction, risk management, organizational change, performance reporting, progress tracking, and project closeout. Analyze customer inputs and understand requirements such as Design Specifications, P&IDs, Control Narratives, I/O lists, Instrument Index, and Operating Philosophies. Raise Technical Queries when needed. Lead a team of SW/HW engineers working on the project. Ensure compliance with the project’s requirements. Develop system designs and review system architecture for the entire Coordinated Control and Safety System (ICSS). Perform I/O to Controller Assignment. Define software and hardware concepts, including third-party interfaces (e.g., Modbus, Profibus, OPC). Develop software libraries, including logic and graphics, and build project-specific software templates. Perform software typical tests and develop I/O & base control modules. Craft and develop customized, sophisticated logic and graphics. Build third-party interface databases/modules. Review and develop the Bill of Materials (BOM) for the entire system. Review all project-related documentation, including SW/HW and project management aspects. Develop internal test plans, verify cabinet builds, and perform internal testing. Conduct Third-Party Interface testing. Develop and implement Software (SW) FAT plans, Hardware (HW) FAT plans, and HW-SW integration plans. Perform coordinated testing between software and hardware and conduct FAT with customers. Build and handles-Built documentation and SAT plans. Perform SAT at customer locations and conduct loop checks on-site. Provide support for startup and commissioning activities. Be responsible for the coordination of lead age initiatives. Quality Control & Assurance Implementation of EEEC IMS processes/documentation as & when required throughout the project. Adopts to WA quality requirements and Customer’s regulatory guidelines Practices and promotes First time right approach. Rigorously follows GDP (Good Documentation Practices). Other Duties Perform other additional specific duties, when requested by the business. These will, typically, be strategic in nature but could potentially be anything that the post holder is suitably qualified and experienced to undertake. These duties may be assigned to the person under mentorship of a supervisor. Who You Are: You promote high visibility of shared contributions to goals. You quickly and significantly take action in constantly evolving, unexpected situations. You actively seek advice from pertinent sources to make timely and well-informed decisions. You handle the risk that comes with moving forward when the outcome is not certain. For This Role, You Will Need: 5-8 years of relevant work experience in the field of process control and automation. DCS/SIS Design experience in Engineering Industry is desired. Preferably worked on Oil & Gas, Refineries, Chemical, Petrochemical DCS/SIS design & engineering projects. Preferred Qualifications that Set You Apart: Must be a bachelor graduate in Instrumentation, Electronics, Electronics & Telecommunication. Our Culture & Commitment to You At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives — because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing competitive benefits plans, a variety of medical insurance plans, Employee Assistance Program, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Show more Show less

Company Description As a world market leader in crop protection, we help farmers to counter these threats and ensure enough safe, nutritious, affordable food for all – while minimizing the use of land and other agricultural inputs. Syngenta Crop Protection keeps plants safe from planting to harvesting. From the moment a seed is planted through to harvest, crops need to be protected from weeds, insects and diseases as well as droughts and floods, heat and cold. Syngenta Crop Protection is headquartered in Switzerland. Job Description Role Purpose: Carry out the assigned analytical and product chemistry work for formulation and Active ingredient work under the supervision of Sr. Research Scientist / Team Leader May have responsibility for providing other individuals with support to complete tasks, which have been assigned. Identifies practical problems and works with the Seniors to solve them Assist the Seniors in Laboratory and equipments maintenance as per GLP requirements. Good experience in handling chromatographic and Physico - chemical instruments. Good in analytical experimental skills. Accountabilities Perform the analysis in the assigned areas of Analytical and Product Chemistry activities Ability to deliver quality experimental results within agreed timelines Able to Interpret and communicate experimental data and report results and conclusions Always ensure safe laboratory practices and waste disposal as per the site policy with due care for others, so that compliance with Syngenta HSE policy achieved. Aptitude to learn continuously to develop self and grow Build on better understanding of analytical and product chemistry work, SOPs and GLP process Tasks may vary depending on the team you would be working and are not limited to the ones listed above Qualifications Knowledge, Skills and Experience: Master’s degree in chemistry preferable analytical or allied Science, area from the reputed Universities with strong academic records and good communication skills with 2-3 years of industrial experience. Experience Analytical Chemist with sound GLP experience is desirable Knowledge of experimental skills, instrumentation and 1-2 years of hands on GLP process is desirable Team player, flexible and resourceful to meet targets with less support Behaviors Team-Oriented Demonstrates personal commitment to the team Values and uses individual differences to support shared goals Good Team player Results-Oriented Self-disciplined to drive assigned experiments to achieve results Additional Information Additional Information : People Are At The Heart Of What We Do Once a year Full body check Competitive insurance scheme Employee assistance program – to take care of your and your loved ones mental health Paid Vacation of 30days, 12 Paid Holidays, Maternity and Paternity Leave, compassionate leaves Education assistance – for your career growth People first culture translated into ‘Most Preferred place to work 2022-23 by Times group’ Note: Syngenta is an Equal Opportunity Employer and does not discriminate in recruitment, hiring, training, promotion or any other employment practices for reasons of race, color, religion, gender, national origin, age, sexual orientation, gender identity, marital or veteran status, disability, or any other legally protected status. To learn more visit: www.syngenta.com and www.good-growth-plan Follow us on: Twitter & LinkedIn Twitter LinkedIn Show more Show less

Responsibilities / Tasks Support internal global customers in the execution of engineering design projects. Design and draft sheet metal components and plant layouts. Complete high-quality design projects on time and within the designated hourly budget. Support the documentation of deliverables for various products within the given technology scope. Other responsibilities as given by Manager. Understand project tasks and evaluate required input from customers. Proactively communicate any missing information, tools, or resources needed for task execution. Create 3D models and 2D drawings of General Arrangements (GA), Plant Layouts, and plant-related equipment based on given GEA technology. Adhere to the established drawing/model review process within the team. Take full accountability for own design drawings and models. Generate equipment fabrication drawings and Bills of Materials (BOMs). Work on Piping and Instrumentation Diagrams (P&IDs), layouts, ducting, and other plant-related tasks. Plan own work in alignment with the overall project schedule in consultation with the manager. Effectively manage time across multiple tasks and provide progress updates to relevant stakeholders. Manage, develop, and innovate 3D libraries. Create basic P&IDs for projects. Create 3D packages of drawings. Generate Bills of Materials (BOMs) for projects. Your Profile / Qualifications Proficiency in CAD software, preferably Autodesk products (Inventor, AutoCAD, Plant 3D). Experience with PLM/PDM software, preferably Vault. Familiarity with ERP systems. Competent in using Microsoft Office tools. Demonstrate agility and independence in task execution while being an effective team player. Flexible to undertake various design tasks within or across different teams. Self-motivated to learn about various products/systems within different GEA technologies. Must possess good English communication skills (oral and written). Degree or Diploma in Mechanical Engineering. Minimum of 3-8 years of experience in mechanical design using various CAD software, preferably Autodesk Inventor, AutoCAD, Plant 3D, etc. Experience in FMCG, Dairy, Pharma will be added advantage Did we spark your interest? Then please click apply above to access our guided application process. Show more Show less

The Role: As a Product Analyst , you will play a critical role in helping us build data-driven, user-centric features on the BotPenguin platform. You will work closely with Product Managers, Design, Engineering, Marketing, and Customer Success Teams to analyze user behavior, validate feature performance, and uncover growth opportunities through actionable insights. This is an exciting opportunity to join a high-growth product team and influence strategic decisions at the intersection of data, product design, and customer experience. What you need for this role: Education: Bachelor’s degree in Computer Science, Business Analytics, Engineering, Statistics, or related field. Experience: 2-5 years of experience in a product or data analyst role within a SaaS or tech product environment. Technical Skills: Strong expertise in MongoDB and data visualization tools (e.g., Tableau, Power BI, Metabase). Familiarity with Google Analytics, Mixpanel, Hotjar, or other product analytics platforms. Hands-on experience working with Excel/Google Sheets, building dashboards, and extracting user insights. Knowledge of product lifecycle, user funnels, A/B testing, and cohort analysis. Bonus: Exposure to Python, R, or basic scripting for data processing. Soft Skills: Excellent analytical and problem-solving skills. Strong communication and storytelling abilities—able to translate data into strategic insights. Proactive attitude with a willingness to own initiatives and drive improvements. Keen interest in product design, user experience, and tech innovation. What you will be doing: Collaborate with Product Managers to define key metrics, success criteria, and feature adoption benchmarks. Analyze platform usage, customer behavior, and market data to discover pain points and opportunity areas. Generate and maintain weekly/monthly product reports and dashboards for cross-functional teams. Design and evaluate A/B tests, feature rollouts, and experiments to improve user engagement and retention. Work with the Engineering team to ensure accurate data tracking and event instrumentation. Monitor product KPIs and proactively raise red flags for anomalies or unexpected trends. Participate in roadmap discussions, contributing insights backed by data. Assist in user segmentation and support marketing and CS teams with insights for personalized communication and retention strategies. Assist on any other related to the product development or management if required. Top reasons to work with us: Lead the architecture and evolution of a fast-growing AI product used globally. Be part of a cutting-edge AI startup driving innovation in chatbot automation. Work with a passionate and talented team that values knowledge-sharing and problem-solving. Growth-oriented environment with ample learning opportunities. Exposure to top-tier global clients and projects with real-world impact. Flexible work hours and an emphasis on work-life balance. A culture that fosters creativity, ownership, and collaboration. Job Type: Full-time Pay: ₹600,000.00 - ₹800,000.00 per year Benefits: Flexible schedule Leave encashment Provident Fund Schedule: Day shift Ability to commute/relocate: Mohali, Punjab: Reliably commute or planning to relocate before starting work (Preferred) Work Location: In person

📍 Business Development Executive – Embedded IoT Electronics Location: Rajkot, Gujarat, India Employment Type: Full-time, On-site 🔍 About Us BrainlyTree is at the forefront of embedded electronics and IoT innovation, developing custom smart devices for industrial and consumer applications. We’re building a passionate team to drive business growth in western India. 🎯 Role Overview As a Business Development Executive, you’ll own the regional sales pipeline, nurture relationships with OEMs, systems integrators, and end-users, and play a vital role in expanding our market presence in Embedded IoT solutions across Gujarat. ✅ Key Responsibilities Develop new IoT business opportunities across verticals (manufacturing, industrial automation, smart products) by identifying prospects and managing the full sales cycle—from lead generation and proposals to negotiation and closure. Liaise with engineering and product teams to craft technically sound and compelling solutions tailored to client needs Build and maintain a robust pipeline through market research, account mapping, and CRM management. Manage customer relationships and support pilots, product demos, and ROI-based proposals . Represent BrainlyTree at regional trade shows, workshops, and technical forums to build brand awareness and generate leads . Collaborate with marketing to create collateral, case studies, and awareness campaigns. 🎓 Qualifications Bachelor’s in Electronics/Electrical/Instrumentation Engineering. MBA or advanced qualification is advantageous. 3–8 years of experience in business/sales within Embedded Electronics, IoT, or Industrial Automation domains. Proven track record with consultative sales to OEMs, integrators, or enterprise clients Strong technical understanding of embedded systems, IoT protocols, sensors, wireless comms, and cloud integration. Excellent communication, presentation, negotiation, and stakeholder management skills. Familiar with CRM tools (e.g., Salesforce), technical documentation, and ROI-based proposal development. Entrepreneurial mindset and self-motivated; capable of working independently and as part of a high-energy team. 🚀 Why Join Us? Work closely with R&D and leadership in a nimble, innovation-driven environment. Competitive compensation with performance-driven incentives. Opportunities for professional growth and leadership. 📝 How to Apply Interested candidates, please apply via LinkedIn with your latest resume and a brief note describing your Embedded IoT achievements and target verticals. Show more Show less

Job Description - Lead Generation Follow-ups - Regular follow-up on sales leads and inquiries - Analyzing client requirements and consulting with the Development/Production team for cost estimation - Designing and preparing price estimations for complete system solutions, including Engineering, Bought-outs, Installation, and Commissioning - Handling inbound RFQs, gathering technical and commercial requirements - Making proactive calls to potential and existing customers for sales development - Responsible for providing suitable solutions that meet customer requirements - Assisting customers with technical queries in coordination with the internal technical support team - Preparing accurate quotations, including proofreading and verification - Coordinating with internal teams such as Production, Development, Logistics, and Accounts for seamless end-to-end execution - Preparing pricing strategies to enhance customer retention, sales growth, and profitability - Building and maintaining strong, long-term customer relationships - Staying up-to-date with product and solution developments within the company - Gathering and analyzing market trends and competitor data Additional Responsibilities - Client Closing - Working on converting leads into successful sales closures - Client Visits - Scheduling and conducting site/customer visits for better engagement and understanding - Social Media Marketing - Supporting online promotional campaigns, content sharing, and lead nurturing via digital platforms Desired Candidate Profile - Strong communication and interpersonal skills - Ability to build rapport and maintain long-term relationships with clients - Team player with a positive attitude and multitasking ability - Strong analytical and negotiation skills - Candidates with a technical background (Electrical, E&TC, Instrumentation) will be preferred - Proficiency in Office Suits, word process, spreadsheet & presentation - Self-motivated and target-driven Job Types: Full-time, Permanent, Fresher Pay: ₹250,000.00 - ₹350,000.00 per year Benefits: Paid sick time Supplemental Pay: Performance bonus Ability to commute/relocate: Andheri, Mumbai, Maharashtra: Reliably commute or planning to relocate before starting work (Preferred) Education: Bachelor's (Preferred) Willingness to travel: 75% (Required) Work Location: In person

Budgeted CTC: ₹45,000–50,000 per month Location- New Delhi Job Description The Sales Engineer will report to the Service Manager and Sales Manager, working from the factory unit or office. Core responsibilities include installing, commissioning and demonstrating quality-control testing instruments; scheduling and performing maintenance, calibration and repairs; troubleshooting faults and escalating complex issues; and delivering timely technical support. You’ll build and sustain client relationships, follow up on service commitments and relay recurring product issues to R&D for continuous improvement. Qualifications & Compensation • 4–5 years’ hands-on experience with QC testing instruments (e.g., IIGM, Ramsons, Welco) • Bachelor’s in Electrical, Mechanical or Instrumentation Engineering • Proficient in electronics/mechanics diagnostics, calibration standards and schematic interpretation • Strong analytical, problem-solving and communication skills • Willingness to travel frequently; valid driver’s license Show more Show less

About Us Vandana Global Limited has been empowering India Since 1996. Registered in Mumbai and working from Raipur Chhattisgarh. The group has positioned itself today to create high value across diverse domains with four key differentiators are state of the art manufacturing technology, efficient quality management, on-time delivery, and commitment to consumer satisfaction and support. Vandana Global today boasts of successes in a range of domains including Manufacturing of Sponge Iron, branded TMT bars as TMTNEXT, Wire rods, Pig Iron, Billet, branded Ferro Alloys as FEROTON, and Power (Thermal, Solar, and Wind). A company deeply rooted in sustainable development and bold progressive ideas; We support a Self - Sufficient Developing nation with its core Technology and Work Ethics. Job Purpose: To ensure uninterrupted electrical operations and timely maintenance of equipment in the Steel Melting Shop (SMS), ensuring safety, efficiency, and adherence to plant production schedules. Key Responsibilities: Perform regular inspection, preventive and breakdown maintenance of: EOT cranes Arc furnaces (EAF/IF) Ladle refining furnace (LRF) Transformers and LT/HT panels Motors, MCC panels, lighting systems Trouble-shoot and repair electrical issues in SMS machines during shifts Monitor and maintain proper functioning of electrical control systems and instrumentation Work closely with SMS operations and production teams to ensure minimal downtime Maintain and update electrical maintenance records and logbooks Ensure compliance with all electrical safety norms and statutory regulations Identify areas of improvement in energy efficiency and electrical reliability Participate in daily toolbox talks and safety briefings Required Skills & Qualifications: ITI / Diploma in Electrical Engineering Minimum 2–5 years of experience in heavy industrial plant electrical work, preferably in Steel Melting Shop (Induction Furnace / Arc Furnace) Sound knowledge of electrical wiring, control panels, motor starters, PLCs, relays, and industrial automation (basic) Experience in LT/HT maintenance and substation operations is a plus Ability to read electrical drawings and troubleshoot electrical faults Familiar with safety practices in steel plants Willing to work in shifts (day/night/rotational) Preferred Candidate: Local or willing to relocate to Raipur Previous experience in steel industry, especially SMS operations Physically fit and able to work in hot and heavy industrial environments Job Types: Full-time, Permanent Benefits: Food provided Paid sick time Paid time off Schedule: Rotational shift Work Location: In person

About Company : Our Client is a leading Indian multinational IT services and consulting firm. It provides digital transformation, cloud computing, data analytics, enterprise application integration, infrastructure management, and application development services. The company caters to over 700 clients across industries such as banking and financial services, manufacturing, technology, media, retail, and travel & hospitality. Its industry-specific solutions are designed to address complex business challenges by combining domain expertise with deep technical capabilities. With a global workforce of over 80,000 professionals and a presence in more than 50 countries. Job Title: Instrument and Electrical Specialist Downstream Locations: PAN INDIA Experience: 6-10 Years (Relevant) Employment Type: Contract to Hire Work Mode : Work From Office Notice Period : Immediate to 15 Days Job Description: Project Role Functional Consultant Must Have Skills Instrumentation and Electrical maintenance and inspection SAP PM Module Asset Performance Management Minimum Experience Required 3 to 6 years Educational Qualification University Degree in Instrumentation Control Electronics Instrumentation Electronics Electrical or related full time university degree Summary As a Functional Consultant you will lead the effort to design build and configure applications acting as the primary point of contact Your day will involve overseeing the application development process collaborating with team members and ensuring project success Purpose Accountabilities Perform engineering activities covering all key areas of instrumentation technology including field instruments control and shutdown valves analyzers and control systems Understand instrumentation deliverables including instrument datasheet understanding updates of drawings documents Narratives PID loop drawings etc Support the cleanup of asset related data including SAP Master data such as catalogue profile Understanding of asset criticality analysis and asset strategy management Understanding of Preventive Predictive Condition monitoring tasks with respect to assets Prepare data loaders for various asset management Skilled Electrical Maintenance Technics with understanding of the maintenance and troubleshooting of electrical systems including motors transformers HTLT motors switchgear circuit breakers and other electrical equipment Show more Show less

About Company: Our client balances innovation with an open, friendly culture and the backing of a long-established parent company known for its ethical reputation. They guide customers from what’s now to what’s next by unlocking the value of their data and applications to solve their digital challenges, achieving outcomes that benefit both business and society. Job Description: Job Title: Instrument and Electrical Specialist Location: Pan India Work Mode: Hybrid Experience: 5 – 10+Years Job Type: Contract to hire Notice Period: Immediate joiners Mandatory Skills: Instrument and Electrical Specialist, Downstream Oil and Gas Role and responsibilities: Project Role Functional Consultant Must Have Skills Instrumentation and Electrical maintenance and inspection SAP PM Module Asset Performance Management Minimum Experience Required 3 to 6 years Educational Qualification University Degree in Instrumentation Control Electronics Instrumentation Electronics Electrical or related fulltime university degree. Summary As a Functional Consultant you will lead the effort to design build and configure applications acting as the primary point of contact Your day will involve overseeing the application development process collaborating with team members and ensuring project success Purpose Accountabilities Perform engineering activities covering all key areas of instrumentation technology including field instruments control and shutdown valves analyzers and control systems Understand instrumentation deliverables including instrument datasheet understanding updates of drawings documents Narratives PID loop drawings etc Support the cleanup of asset related data including SAP Master data such as catalogue profile Understanding of asset criticality analysis and asset strategy management Understanding of Preventive Predictive Condition monitoring tasks with respect to assets Prepare data loaders for various asset management Skilled Electrical Maintenance Technics with understanding of the maintenance and troubleshooting of electrical systems including motors transformers HTLT motors switchgear circuit breakers and other electrical equipment . Show more Show less