669 Instrumentation Engineering Jobs

Job Description - Manager Instrumentation Objectives / Purpose: The Instrumentation Engineer is responsible for designing, installing, and maintaining instruments that measure and control industrial processes. They ensure that instruments used for process control are accurate, reliable, and safe. The role also involves troubleshooting instrumentation issues, conducting performance evaluations, and improving system performance. Accountabilities: Design and develop control loops, sensors, transmitters, and other instrumentation systems. Ensure designs meet safety, performance, and compliance standards. Collaborate with cross-functional teams to integrate instrumentation into larger systems. Batch charging and monitoring Ensure that the correct installation procedures are followed for all equipment. Perform site surveys and risk assessments prior to installation. Supervise the testing and commissioning of new systems, ensuring systems meet performance criteria. Perform routine checks and calibrations of equipment. Monitor the performance of systems and take corrective actions as necessary. Implement preventive maintenance programs to reduce downtime and extend equipment life. Diagnose faults and determine causes of instrument failures or malfunctions. Develop solutions to rectify problems efficiently and effectively. Document issues and resolutions to improve future troubleshooting efforts. Perform risk assessments to identify safety hazards in instrumentation systems. Maintain accurate schematics, wiring diagrams, and system documentation. Prepare technical reports, inspection logs, and maintenance records. Provide regular updates and performance reviews to management and other stakeholders. Procure materials, equipment, and instruments required for maintenance while ensuring cost efficiency. Coordinate resources and manpower effectively to achieve goals on time. Responsibilities: 1. Design and Specification of Instrumentation Systems 2. Installation and Commissioning 3. Calibration and Maintenance 4. Troubleshooting and Problem Resolution 5. Spares & Material Management 6. System Optimization and Performance Improvement 7. Adherence to Safety and Regulatory Standards 8. Documentation and Reporting 9. Collaboration with Cross-Functional Teams 10. Project Management and Coordination 11. Continuous Improvement and Innovation 12. Cost Control and Resource Management 13. Training and Mentorship Interface: Interact with EHS department for document compliance and trainings. Interact with QA department for document compliance. Interact with Electrical Team for diagnose and resolve electrical faults affecting Instrumentation systems, such as power surges or electrical failures. Interface with Process Engineering Team for to select appropriate instruments (e.g., pressure transmitters, flow meters) based on the process requirements, collaborating on the design and configuration of control loops etc. Interface with Mechanical Engineering Team for to ensure instrumentation can function within the mechanical systems' physical constraints (e.g., temperature, pressure, vibration), Installation of Instruments Etc. Interface with IT (Information Technology) Team for Data Communication, Cybersecurity and Network Integration. Interface with Suppliers and Vendors for Product Selection, Vendor Support and Procurement & Delivery etc. Interface with Regulatory Authorities for Weighing Metrology Calibration, pH Meters monitoring, Coordinating with regulatory bodies during inspections, audits, and certifications for instrumentation systems. Competencies: 1. Excellent knowledge & understanding in Field Instrumentation . 2. Knowledge on DCS/PLC Control Systems (Honeywell /ABB/SIEMENS /SCHNEIDER) 3. Calibration and Testing of Field Instruments 4. Knowledge of Process Control 5. Troubleshooting and Problem Solving 6. Control Systems Programming 7. Knowledge on Third party Communications & Protocol . 8. Project Planning and Execution 9. Vendor Management 10. Decision Making and Delegation 11. Excellent written and verbal communication skills. 12. Good interpersonal skill. 13. Working knowledge in SAP is preferred. 14. Working Knowledge on ELV systems line Fire Alarm system/PA System /CCTV Network . Experience: 12-15years Nature of experience: In the Chemical , Pharma , or Argo industries, an Instrumentation Engineer must have specific experience and skills to ensure the effective operation, calibration, and maintenance of systems that are crucial for product quality, safety, and regulatory compliance

Perform preventive and corrective maintenance. Calibrate and test instruments. Troubleshoot and repair. Monitor performance. Ensure compliance with safety and regulatory standards & maintain records Strong troubleshooting and problem-solving skills.

Develops and implements account plans and approaches in line with the overall strategy formulated by the Sub director MRO&S Responsible for the assigned area in the business model MRO&S regarding revenue, strategy & execute the strategy defined by the Sub region director MRO&S Provides professional and exceptional client service in all interactions with clients. Identifies and generates new business opportunities in end user segments and in Services. Responsible for opportunities funnel, hit ratio, profitability. Implements agreed price strategy of Subregion BM MRO&S to avoiding internal price competition in co-operation with Global Key account & Sales Excellence. Maintaining impactful relationship with stakeholders and enhancing customer centricity within the organization. Identify the customers future needs and issues to provide the right solutions. Cooperation during introduction of new solutions / services with the sub region director MRO&S To prepare and submit reports to management on time. Excellent communication, negotiation, and interpersonal skills. Bachelor s degree in Instrumentation engineering, or a related field. 8 to 12+ years of sales experience, with a significant portion in handling End-user /OEM customers. Experience in Sales or Marketing or business development with end user customers Work-life integration Employee discounts Attractive remuneration system Flexible working hours Good development opportunities Health initiatives Mobile working

Maintenance of power transformer in HT Maintenance of HT and LT breakers and troubleshooting Maintenance of OLTC of transformer Maintenance of OTI AND WTI Maintenance of relays Maintenance of HT panel Fresher -2024 & 2025 only apply

we are seeking a highly motivated and detail oriented Engineer to join our team the candidate will be responsible for designing analyzing and implementing engineering analyzing safety and efficiency in all project

What you ll do: Understand product requirements, design and develop code , module level and system level embedded software design/coding, validation using programming languages like C RTOS on embedded systems running for Linux platforms for Circuit Protection products (Switchgears/Relays/Meters etc.). Involve in technical design including architectural and more detailed object oriented design . Providing project, process, and technical leadership on project activities should contribute in product development technology innovations. Provide overall technical leadership for Products development. Lead in technical aspect of agile development planning efforts. - Engages in development, design and testing of smart gateway products using programming languages like Assembly, C C++, JAVA, HTML5 on embedded systems running on Linux platforms. - Handle build management, change management, and configuration management tools like JIRA / bamboo / TFS / VS / GIT / Stash / Clear Case/Clear Quest/DOORS etc. - Suggest and develop re-usable components and looks for continuous improvement opportunities in industrial control protection products. Share knowledge within the team and demonstrates flexibility working in parallel on multiple assignments/product categories. - Physical (Memory, processor utilization) resource budgeting experience. - Develops an understanding of both technology and product concepts and is able to articulate product and software design. Ensures quality of delivery in accordance with the plan adhering to the standard practices used in agile/waterfall model. Qualifications: Bachelors in computer science / electronics/ ETC/ Instrumentation engineering 6+ Years Skills: - Experience of industrial communication protocols BACNet, Modbus,TCP/IP, http, Modbus TCP, DNP, BACNetIP, websockets etc. Hands on in developing quality software applications. - Operating system/RTOS concept, multithreading and IPC concepts, sound knowledge and experience of developing Linux shell scripting, Makefiles and application programming. - Working knowledge of Linux programming interface - Experience in embedded programming - Experience with device drivers, Kernel programming - Extensive experience of using C++ in products - Good To Have -Sound understanding of Operating Systems, Data Structures, Algorithms, Object Oriented Programming and design patterns. - Experience on Yocto is a plus Good communication skills in English (verbal and written) to communicate information effectively to customers, and technical staff

Independent, Freelance, and Retired Oil & Gas Consultants Apply Now Remarkable people, trusted by clients to design and advance the world. Wood is currently recruiting for experienced Independent, Freelance, and Retired Oil & Gas Consultants with extensive experience in the Oil & Gas sector for Chennai, Tamil Nadu, India Why Join Us? Be part of world-class Oil & Gas projects. Flexible engagement options to suit your lifestyle. Share your expertise and make an impact. Who Were Looking For: Independent and freelance consultants Retired professionals eager to contribute their knowledge Specialists across EPC and FEED disciplines Key Disciplines: Control & Instrumentation Telecom Civil & Structural LNG Tank | Cooling Tower | Geotechnical Senior Architect Life Sciences Equipment Engineering Pipeline Engineering THSE (Technical HSE) Engagement Options: Part-time consulting Agency roles Subcontracting opportunities Qualifications: Education: BE / B.Tech in relevant engineering disciplines Experience: 20 to 35 years in Oil & Gas / EPC industry How to Apply: Send your profile with the subject line: Consultant [Your Discipline Name] Join #TeamWood and leverage your experience to shape the next generation of energy projects!

1)Calibrated instruments like pressure gauge, compound gauge, magnehelic gauge, vacuum gauge, temperature sensors, temperature controller, Temperature and Rh transmitters ,Digital Timers , hot air ovens calibration ,vacuum ovens calibration ,rota-meters, Incubator shakers, etc using our respective master instruments. 2)Calibrating sensors like pH sensor & meters , conductivity sensor & meter , DO sensor meters , ORP sensors & Indicators using our standard instruments & solutions. Communication: Hindi, English & local language

Role & responsibilities Manufacturing of Industrial Automation and robot Preferred candidate profile Anyone with Btech/ Diploma/ ITI - fresher

Shall be a good reviewer and have ability to pick the important design and interface aspects.Ability to work standalone in various packages like ICSS/Metering/Mechanical packages.Ability to interact/coordinate with other disciplines for inputs Required Candidate profile Participate in Safety Studies/Review Meetings HAZOP, HAZID, SIL, RAM. Ensure that all deliverables follow the applicable Codes, Standards, CLASS and Project requirements as well as Corporate

FREE JOB! FREE JOB! Company : Lumax Industries Ltd Company Location - Chinchwad, Pune Industry Type: Automotive / Auto Components / Engineering Qualification : Diploma : Mechanical, Electrical, Electronics, ENTC, Instrumentation, Automobile Diploma Holders: 19,000/- per month Attendance Bounce : 1000/- Canteen Facility 8 Hours Shift Male Only Diploma Extra Overtime Call on - Hr Sapna Mam - 9226562301 Hr Siddhi Mam - 9226514187 Come with - Resume + Qualification Documents + Adhar card + Pan card + Passport size 4 photos + Bank Pass Book+ Wear shoes

PLC and HMI programming (AB, Honeywell, Siemens)PID control and Control ValvesIT knowledge Data Structure and networkingSCADA programming and designBoiler operation Instrumentation, Interlocks, Safety, Sequence for start and stop of Boiler

Design, select, and install instrumentation and control systems for process monitoring and automation.Perform calibration, testing, and troubleshooting of sensors, transmitters, controllers, and other instrumentation

Skills: Exp. on Control Panels Designing using AutoCAD Electrical/Eplan min 3 to 4+ Yrs, Knowledge of GA drawings,Device placement, Wiring Diagrams,Device List (BOM), terminal List etc Exp. in Design work using integrated tools such as Maestro.

Control System engineering for Industrial Gas Turbine. The position will be based in Gurgaon, India, in the global challenging technical environment in the Global Customer Operations (GS C GCO EN GGN), Control Systems department. You will be working closely with our Finspong, Sweden based teams for Automation and Control Project Engineering of Medium Gas Turbines. Additional tasks include R&D support and service support/clarifications. Collaboration with Commissioning staff and Colleagues in Finspong, Sweden. Open loop & Closed loop (Governor) software engineering for Industrial Gas Turbine, on SPPA-T3000 Platform Designing of Gas Turbine Open loop and closed loop schemes including Turbine protection logics, Gas Turbine startup/ shutdown sequences. Control HW engineering and purchase support. Project Simulation support and coordination with Control colleagues sitting in Sweden. Expertise in Gas turbine and it ands auxiliarys process: Clarify project design requirements and create internal structures for project execution Understanding of plant auxiliaries, electrical and generator schemes and their control concept. Turbine/plant startup scheme and protection concept Turbine transient study and functional testing of project governor schemes post software implementation in T3000. Provide field/site support Comos Project I&C parameters engineering Define I&C system requirements in T3000 & COMOS Define customer interfaces requirements documentation Create project specific I&C solutions Create project specific control system testing procedures Provide technical solutions for issues identified during testing. We dont need superheroes, just super minds: Bachelor's degree in Controls/ Electronics/Instrumentation Engineering or other comparable degree 3 to 10 years of engineering work experience 3+ years of relevant engineering experience Expertise in SPPA T3000 , PCS7 system, COMOS or equivalent database tools Experience with Siemens Gas Turbines / combined cycle power plant operation. Proficiency in Microsoft excel / Access (Visual Basic macros etc.) Preferred Knowledge/Skills, Education, and Experience Expertise in Control System Design. Solid understanding of Functional Safety requirements IEC61508/IEC61511 Knowledge of power plant auxiliaries and their control concept Solid experience with working in a global team Flexibility to travel in India & abroad. Ability and willingness to learn new fields, committed to personal development and continuous improvement. High flexibility in taking new tasks/responsibilities. Excellent written and verbal communication skills This role is based at Site (Gurgaon). Youll also get to visit other locations in India and beyond, so youll need to go where this journey takes you. In return, youll get the chance to work with teams impacting entire cities, countries and the shape of things to come.

Senior Executive Customer Support Job profile: Service of Siemens Process Instrumentation product family (pressure transmitters, level transmitters, flowmeters, Weighing products and valve positioners) Capturing and execution of Siemens Process Instrumentation service business in region Coordination and effective utilization of service partners to increase customer satisfaction for Siemens Process Instrumentation services in region How do I qualify for this job? B.E or BTECH (Instrumentation / Electronics) Candidate should have good knowledge of customer base in Region Candidate should have experience of minimum 3 years in servicing of Process Instrumentation products Candidate should have good reputation amongst region customers Candidate should have very good command over written and spoken English Candidate should have very good communication skills Candidate should have good command on MS excel, word. Candidate should have great interpersonal skills and should be able to work in a Team Knowledge and hands on experience on Siemens process Instrumentation products will be added advantage

Role Erection and Commissioning of Instruments, Loop checking, troubleshooting & calibration. Inspection and witness of Instruments and control system If Interested pls share CV on careers@nglfinechem.com

Role Overview: As a Principal Telecom Engineer, you will be responsible for interpreting internal or external business issues and recommending best practices. You will be tasked with solving complex Telecommunications (Eng)-related problems and working independently with minimal guidance. Additionally, you may lead functional teams or projects and are regarded as a specialist in Telecommunications (Eng). Your role requires in-depth expertise in Telecommunications (Eng) along with broad knowledge of the discipline within the Engineering function. Key Responsibilities: - Perform conceptual, FEED, and detailed analyses and designs related to Telecom systems according to design basis, project specifications, design codes, and standards - Apply in-depth skills and broad knowledge to address complex problems and non-standard situations - Prepare detailed design calculations, analyses, reports, and procedures ensuring clarity and accuracy - Manage your time effectively to meet objectives, forecast resource requirements, and communicate difficult concepts persuasively - Lead small or medium Telecom Engineering teams, direct the Discipline engineering design of assigned work areas, and ensure completion within planned schedules and budgets - Coordinate with other disciplines to develop clash-free designs and obtain necessary inputs for Discipline designs and drawings Qualification Required: - Bachelor's degree in Electrical or Electronics and Instrumentation Engineering (Master's Degree preferred) - 15-20 years of experience in oil and gas industry with major contractors or consultants focusing on detail design - Detailed knowledge of design techniques, analysis methods, standards, codes, and guidelines - Preferably a Registered Professional Engineer or member of a professional engineering society - Knowledge of Functional Safety standards such as IEC 61508 and IEC 61511 About the Company: The company's ingenuity fuels daily life and has forged trusted partnerships across the energy value chain. With expertise in laying subsea infrastructure, installing offshore wind platforms, and reshaping the onshore landscape for sustainable energy delivery, the company has been making the impossible possible for over 100 years. Joining a team of over 30,000 bright minds across 54 countries, you will be contributing to driving the energy transition and shaping the future of energy production.,

Key Responsibilities 1. Design & Detailed Engineering Lead preparation of Detailed Project Reports (DPR), including concept notes, system studies, and technical specifications. Review and approve vendor drawings, datasheets, calculation notes, and test reports. Ensure design alignment with project requirements, standards, and compliance frameworks. 2. Bid Management & Vendor Coordination Evaluate C&I packages during tendering stages and manage technical clarifications. Coordinate with procurement on bid evaluations, post-bid discussions, and finalization of vendor packages. Conduct vendor assessments, factory inspections, and issue dispatch clearances. 3. Technology Integration Assess and propose new technologies for automation, instrumentation, and plant analytics. Serve as the focal point for PI System integration and training across generating stations. Ensure cybersecurity and ISO compliance in system architecture and design. 4. Project Support & Execution Collaborate with EPC vendors, project teams, and inspection agencies through project lifecycle. Provide site support during commissioning and handover stages for all C&I systems. Liaise across departments to ensure smooth transition from engineering to operations. Qualifications B.E./B.Tech or M.E./M.Tech in Instrumentation, Electronics, or Telecommunications. Experience 1015 years in instrumentation and automation engineering. Minimum 10 years in power plant control system design (DCS/PLC). Exposure to thermal and hydro generating stations preferred. Technical Competencies Strong knowledge of: DCS, PLC, SCADA, field instrumentation, P&IDs, protection & interlocks, control philosophy. Familiar with: Communication protocols – Profibus, Profinet, Fieldbus, OPC, Modbus, IEC 61850, etc. Tools & Platforms AutoCAD, MS Project, SAP MM, Power BI, OSIsoft PI, Documentum, Wrench. Experience with systems such as: PADO, vibration monitoring, SWAS, and analytics platforms.

Independently lead the cost estimation process for electrical and instrumentation components across various projects. Prepare detailed techno-commercial proposals, ensuring alignment with project requirements and international standards. Required Candidate profile DO NOT CONTACT RECRUITERS DIRECTLY ,APPLY ON NAUKRI AND RECRUITERS WILL GET BACK TO YOU

Independently lead the cost estimation process for electrical and instrumentation components across various projects. Prepare detailed techno-commercial proposals, ensuring alignment with project requirements and international standards. Required Candidate profile DO NOT CONTACT RECRUITERS DIRECTLY ,APPLY ON NAUKRI AND RECRUITERS WILL GET BACK TO YOU

Independently lead the cost estimation process for electrical and instrumentation components across various projects. Prepare detailed techno-commercial proposals, ensuring alignment with project requirements and international standards. Required Candidate profile DO NOT CONTACT RECRUITERS DIRECTLY ,APPLY ON NAUKRI AND RECRUITERS WILL GET BACK TO YOU

About The Role Project Role : Software Development Engineer Project Role Description : Analyze, design, code and test multiple components of application code across one or more clients. Perform maintenance, enhancements and/or development work. Must have skills : AVEVA PDMS Good to have skills : NA Minimum 3 year(s) of experience is required Educational Qualification : 15 years full time education Summary :The AVEVA UE Instrumentation Engineer (Build, Configuration & Data Management) will be responsible for configuring, managing, and validating instrumentation data within AVEVA Unified Engineering (UE) to support project execution and digital workflows. He will lead the build of discipline-specific objects such as instrument tags, loop data, device types, and I/O assignments, ensuring alignment with project standards and data consistency across the engineering lifecycle. With 6+ years of hands-on experience in AVEVA UE, he will collaborate with electrical, process, and mechanical teams to integrate instrumentation data, support deliverables such as instrument indexes and loop diagrams, and maintain high-quality data structures. Leveraging his strong knowledge of instrumentation workflows, datasheets, and ISA standards, he will enable accurate, reliable, and standardized data management for EPC and Owner/Operator projects in oil & gas, power, and chemical industries.Roles & Responsibilities:-Configure and maintain instrumentation data structures within AVEVA Unified Engineering (UE) according to project specifications and standards.-Build and manage instrument tags, loop data, device types, and I/O assignments in UE.-Collaborate with other discipline leads (electrical, process, mechanical) to ensure data alignment and integration.-Develop and maintain instrumentation templates, datasheets, and library objects within UE.-Support data loading, validation, and cleanup activities to ensure high data quality and consistency.-Work with engineering teams to generate reports and support deliverables such as instrument index, loop diagrams, and hook-ups.-Troubleshoot configuration and data-related issues in coordination with internal teams and AVEVA support.-Participate in system testing, user training, and documentation of configuration processes.Professional & Technical Skills: -6+ years of hands-on experience with AVEVA Unified Engineering (UE) focusing on Instrumentation build and data management.-Strong knowledge of instrumentation engineering workflows, including tag creation, loop design, and device specification.-Experience with data modelling and configuration of instrumentation objects in AVEVA UE.-Familiarity with instrument datasheets, control systems, and I/O assignments.-Understanding of project execution standards, naming conventions, and discipline integration in a multi-discipline environment.-Proficient in data validation, troubleshooting, and reporting within engineering systems. Additional Information:-Exposure to AVEVA Instrumentation, AVEVA Engineering, or other engineering data platforms.-Knowledge of ISA standards (e.g., ISA 5.1) and instrumentation best practices.-Experience working in EPC or Owner/Operator projects in sectors like Oil & Gas, Power, or Chemicals.-Familiarity with digital handover requirements and ISO 15926 standards is a plus. Qualification 15 years full time education

Independently lead the cost estimation process for electrical and instrumentation components across various projects. Prepare detailed techno-commercial proposals, ensuring alignment with project requirements and international standards. Required Candidate profile DO NOT CONTACT RECRUITERS DIRECTLY ,APPLY ON NAUKRI AND RECRUITERS WILL GET BACK TO YOU

Shall be a good reviewer and have ability to pick the important design and interface aspects.Ability to work standalone in various packages like ICSS/Metering/Mechanical packages.Ability to interact/coordinate with other disciplines for inputs Required Candidate profile Participate in Safety Studies/Review Meetings HAZOP, HAZID, SIL, RAM. Ensure that all deliverables follow the applicable Codes, Standards, CLASS and Project requirements as well as Corporate