KEY RESPONSIBILITIES: - Reviews design plans, process procedures, test procedures & quality manuals to understand the scope, requirements, & function of the problem. Identifies root causes of problems in the production process, recommends &/or implement corrective measures. Analyzes data to identify trends in product quality or defects with a goal of mitigating & preventing recurrence & future defects. Supports the product development or production team by providing analysis & expertise throughout the inspection process. Lab inspection & providing the reading/annexure. Providing the batch numbers to the production team after the quality check. Maintain the quality of goods, warehouse & manpower. Other activities assigned by the management. Job Type: Full-time Pay: ₹20,000.00 - ₹35,000.00 per month Schedule: Day shift Work Location: In person

Requirement :- FQ Engineer-Mech Location :- Ludhiana Experience - 15 - 20 years Reuirement -FQ Engineer - (API 650 Tanks will be added advantage) Qualification - Degree /Diploma - Mech + NDT Level - II (RT UT MP DP) JD - As below 1) Shall be familier with Tank Fabrication / Inspection / NDT as per API Standard 2) Good knowledge of amteial . testing , codes and fabrication process of Tanks at site 3) Effective coordination with all stake holders at site 4) Prepare daily weekly monthly reports as per client requiremnt Apply only if you are eligible for the above vacancy and ready to join immediately. Apply Before 21 July 2025

We required Inspector / Jr. Engineer - Quality Control for our company based in Mohali, Punjab Qualification: - ITI (Machinist/Turner/Fitter) / Diploma (Mech) / B.Tech (Mech) Experience: 1 Years to 4 Years' experience in Line Inspection & Pre-Dispatch Inspection Quality. Interested candidates can drop their resume on give mail ID. Mail ID: vikram@pritikaautoindustries.com WhatsApp No.: +91-7832871160 (Time 11 AM to 4 PM) Address: C-94, Industrial Area, Phase 7, Mohali, Chandigarh - 160055 Job Type: Full-time Pay: ₹16,000.00 - ₹22,000.00 per month Benefits: Paid sick time Paid time off Supplemental Pay: Overtime pay Yearly bonus Location: Sahibzada Ajit Singh Nagar, Punjab (Required) Work Location: In person

Mobility Solutions Limited is looking for a passionate and detail-oriented Quality Engineer to join our team. Eligibility - BE/Diploma with 1 to 2 year Experience. Male / Female can apply 1. If you have experience in quality control, in-process inspection, and quality assurance, we’d love to hear from you! 2. Key Responsibilities:Conduct quality control and in-process checks during production. 3. Basic Knowledge about ISO 9001 Prepare and maintain Standard Operating Procedures (SOPs) as per project requirements. 4. Ensure adherence to customer-specific quality standards and expectations.Support continuous improvement initiatives in quality systems. 5. Strong understanding of quality standards and manufacturing processes. 6.Good communication skills and basic computer proficiency for report preparation. How to Apply: Send your CV to s_kartheeswaran@mslindia.net Job Types: Full-time, Permanent, Fresher Pay: From ₹20,000.00 per month Benefits: Health insurance Provident Fund Schedule: Day shift Supplemental Pay: Performance bonus Quarterly bonus Yearly bonus Ability to commute/relocate: Lalru, Mohali, Punjab: Reliably commute or planning to relocate before starting work (Preferred) Work Location: In person Expected Start Date: 16/06/2025

About the Company: Triveni Engineering & Industries Limited (TEIL) is one of the leading industrial conglomerates in India with over 90 years of experience in diversified businesses. TEIL is one of India's largest integrated sugar & ethanol manufacturers and is amongst the leading players in Power Transmission and Water & Wastewater treatment solutions. Triveni also owns and operates multiple FMCG Brands that bring extremely high-quality products to the Indian consumer. With 22 world-class manufacturing facilities across India, Triveni is focused on sustainable growth driven by excellence, engineering efficiency, R&D innovation, and long-term customer relationships. Find out more by clicking: www.trivenigroup.com Key Responsibilities: Planning & management of projects involving design, development, manufacturing, inspection, testing, and supply of equipment/systems. Drive the project interfacing with design, production, procurement, and quality assurance departments for the smooth progress of the project and meeting the project timelines. Interface with sub-vendors and external design agencies for sub-contracting of work related to design, manufacturing, and inspection as required for the project. Participate and in some cases lead the negotiations with vendors. Attend project review meetings with customers. Coordinate the post-delivery support requirements of the customer. Personality traits / Competencies: Excellent project management and contract management skills. Sound negotiation skills A proactive approach to handling problems. Good oral & written communication and liaison skills. Sound interpersonal skills. Good IT Skills for project management and correspondence. Job Specifications/Profile: BE / B.Tech (Mechanical) The person with approx. 2 - 3 years of experience in project execution in manufacturing/ production is desirable. Should have very good knowledge of mechanical engineering, and manufacturing processes. Show more Show less

Inspect and evaluate the quality of wheat, maize, and other grains. Collect samples and test them in the lab as per defined standards. Check for pests, moisture content, foreign matter, and fungal presence. Ensure compliance with government and institutional quality standards (e.g., FSSAI, AGMARK). Prepare quality reports for grains received at procurement centers or warehouses. Monitor the condition of stored grains and report regularly. Investigate reasons for quality deterioration and suggest corrective actions. Maintain records and submit inspection reports on time. Provide training to field staff and supervisors on quality-related aspects. Assist in quality audits and sampling procedures. Job Type: Full-time Schedule: Day shift Education: Bachelor's (Preferred) Work Location: In person

Installs, debugs and provides technical maintenance for product and component hardware and software, mainly on customer premises. Provides scheduled inspection, cleaning and other services and performs minor product repairs within an assigned territory. Inspects products for correct operation and resolves noted issues and / or escalates according to established procedure. Schedules services, completes all required paperwork and works with customers to ensure satisfaction with service delivery and understanding of product functionality. Gains familiarity with Field Service Technician practices and procedures. With guidance and / or in conjunction with more experienced technicians performs any or all of the following: Incident Handling: Utilizes diagnostic tools to perform troubleshooting via detailed analysis of hardware and software failures. Performs hardware repairs on a component level. Cleans and adjusts mechanical components. Configures and installs applicable software. Preventive Maintenance: Performs routine checks according to documented procedures. Refills consumables as directed. IMAC/R: Installs, moves, adds, changes and removes hardware and software products. Customer Training: Instructs and trains customers on usage and operation of installed hardware and software. Participates in regular hardware and software trainings (on the job, classroom and web based). Participates in the implementation of measures to achieve agreed KPIs. Assists with special projects as assigned. Required Qualifications Education or equivalent work experience required. Minimum of 1-2 years of relevant experience or equivalent combination of education and experience in Field Services. Good written and verbal communication skills. Driver's license and driving record that satisfies DN's fleet requirements.

This is a full-time on-site role for a Testing Engineer. The Testing Engineer will be responsible for creating and executing test plans, writing test cases, and conducting functional testing. They will also be responsible for ensuring quality of products and services through comprehensive testing. Roles & Responsibilities: 1. Develop and implement testing procedures for power transformers according to industry standards and specifications. 2. Perform a variety of tests including but not limited to insulation resistance, ratio, polarity, power factor, and load testing. 3. Analyze test results and provide recommendations for improvements or corrective actions. 4. Collaborate with design and manufacturing teams to ensure that products meet performance and quality requirements. 5. Maintain testing equipment and ensure calibration accuracy. 6. Provide technical support to internal teams and customers regarding testing procedures and results. 7. Stay updated on industry trends, standards, and best practices related to power transformer testing. 8. Testing of transformer rating from 100KVA to 50MVA. 9. Day to day production planning to achieve maximum production. 10. Inspection process on each stage of production and after completion. 11. Record preparation for test reports and production. 12. Diagnoses transformer defects and routes rejected transformers for repairs. 13. Tests insulation, current resistance, loss of current, and performance of transformers and tests insulating strength of transformer oil, using electrical testing mechanisms 14. Successively turns switches which control transmission of current through transformer to testing meters, such as voltmeter, ammeter, and ohmmeter, for testing insulation, resistance, and loss of current. 15. Tests insulating strength of transformer oil by passing current through oil sample placed in box containing two electrodes. 16. Testing of Transformer Oil as per IS, ASTM, IEC and IEEE standards. Preferred Skills: 1. Minimum of 10 years of experience in testing Power Transformers, Induction Furnace Transformers, Sub merged arc furnace transformers. 2. Proficiency in using testing instruments such as power analyzers, insulation resistance testers, and transformer turns ratio meters. 3. Basic knowledge of AutoCAD 2D Software 4. Ability to ready the transformer drawings. 5. Coordinate with customers, sales, and commercials. Job Types: Full-time, Permanent Pay: ₹300,000.00 - ₹600,000.00 per year Benefits: Food provided Health insurance Leave encashment Life insurance Paid sick time Provident Fund Schedule: Day shift Supplemental Pay: Overtime pay Performance bonus Yearly bonus Work Location: On the road

This position is immediately needed for our Salem plant An Electrical Maintenance Technician in the steel industry ensures the proper functioning of all electrical systems and equipment, contributing to smooth plant operations and safety. This role involves troubleshooting, repairing, installing, and maintaining a wide range of electrical components, systems, and equipment. Key Responsibilities: Troubleshooting and Repair: Diagnosing and resolving electrical faults in various equipment and systems. Installation and Maintenance: Installing new equipment and maintaining existing systems to prevent failures. Preventive Maintenance: Performing routine inspections, testing, and maintenance tasks to ensure equipment reliability. Working with Electrical Systems: Working with AC/DC systems, PLCs, and other electrical control systems. Following Safety Protocols: Adhering to all safety regulations and procedures to ensure a safe working environment. Documentation: Maintaining accurate records of maintenance activities, including work orders and inspection reports. Collaboration: Working with other maintenance teams and production personnel to address broader facility issues. Staying Updated: Keeping current with the latest electrical technologies and industry standards. Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹30,000.00 per month Benefits: Health insurance Provident Fund Schedule: Day shift Monday to Friday Supplemental Pay: Overtime pay Yearly bonus Work Location: In person

Company Description We suggest you enter details here. Role Description This is a full-time on-site role for a Quality Control Inspector at Jcb India Limited in Faridabad, Harayana. The Quality Control Inspector will be responsible for conducting quality control inspections, ensuring adherence to quality standards, and communicating findings to the relevant teams. Qualifications Quality Control and Quality Assurance skills Experience in Inspection and Quality Management Effective Communication skills Attention to detail and strong analytical skills Ability to work independently and in a team Previous experience in a similar role is preferred Knowledge of quality control processes and techniques Relevant certification in quality control is a plus Show more Show less

Supervise all on-site construction activities, ensuring adherence to design plans and project specifications. Coordinate and schedule trades, subcontractors, deliveries, and inspections. Monitor project timelines and report progress to the Project Manager. Conduct daily site walkthroughs to ensure quality control and safety compliance. Enforce PSR Homes’ safety protocols Resolve site issues and address unexpected delays or challenges effectively. Maintain accurate site records, including daily logs, incident reports, and inspection results. Ensure materials and resources are used efficiently and waste is minimized. Act as the primary point of contact between the site and head office/project management. Attend and contribute to project meetings. Job Type: Full-time Pay: ₹20,000.00 - ₹25,000.00 per month Schedule: Day shift Supplemental Pay: Overtime pay Performance bonus Yearly bonus Shift availability: Day Shift (Preferred) Willingness to travel: 25% (Preferred) Work Location: In person

Job Description: Run CNC Machine (HMC, VMC, VTL) Independently. Execute the inspection as per the control plans / Quality plan frequency using measuring instrument like Vernier, Micrometer, Bore dial, etc… Daily maintenance of machinery. Closely monitor the machine performance as per the programme. Ensure safety of machinery and measuring equipment. Update production records, Idle times in log book during every shift. Ensure cleanliness and housekeeping of the premises (5S). Ensure safe use of customer property, Instruments, etc... Work as per Standard Operating Procedure. Skills Required: Machining Processes CNC Operations Knowledge on relevant Machines Maintenance Drawing Interpretation Skill Inspection and Instrument Usage Communication and Team Skills Education : ITI, DME, DAE, B.E Mech Experience : 0 to 7 yrs Job Type: Full-time Pay: ₹15,500.00 - ₹23,000.00 per month Benefits: Food provided Health insurance Leave encashment Provident Fund Schedule: Rotational shift Supplemental Pay: Overtime pay Performance bonus Yearly bonus Work Location: In person

What You’ll Do Drive for the Incoming inspection activity and Shopfloor issues resolution timely Developing the Incoming Part Quality plan Responsible for Qualify and approve the incoming parts as per the Eaton requirements and co-ordinate with the supplier Person Should Drive on Production Feasibility Agreement at inital stage, complete APQP/PPAP for all the parts that are qualified, PSW sign Off and Production Readiness Assesssment at suppler Place Monthly report on the Supplier Quality metrics Supplier Periodic Visit and Commodity Process audit and Control establishment Review, Monitor & Improve Monthly supplier performance Driving trouble/Focus supplier activity to improve Supplier metrics and Performance Drive with suppliers to improve supplier quality, which will help reducing plant quality issues Drive that Quality is built into the product & process at suppliers end through deployment of Quality tools like Control Plan, PFMEA, SPC, MSA Should Handle functional Quality requirement trainings to all the suppliers in PPAP, SPC, 8D Should have Knowlegde on the Critical part management & Special Process Should have knowldge on measuring Equipments - Meachanical , Electrical Qualifications BE /Diploma - Electrical and Electronics /Mechanical 2+ years of experience for BE, 5+ years of Diploma in Supplier Quality - Incoming inspection and Development activity Skills Through knowledge of all the Quality tools Problem Solving, PPAP, APQP, FMEA, Control Plan. Detailed knowledge of supplier Qualification and Incoming Inspection SAP QM knowledge is required Excellent written and verbal communication skills. Power Point PPT preparation ]]> Show more Show less

Job Title: Fabric Assistant Location: Karumathampatti, Coimbatore Job Type: Full-Time Experience Level: Entry-level Education Required: 10th / 12th Pass Job Summary: We are seeking a reliable and detail-oriented Fabric Assistant to support our fabric inventory and logistics operations. The ideal candidate should have a good understanding of fabric types and GSM (Grams per Square Meter), along with basic computer skills to manage delivery and stock records efficiently. Key Responsibilities: Identify and classify fabrics based on type, quality, and GSM. Maintain accurate records of fabric stock received and dispatched. Prepare and update Delivery Challans for incoming and outgoing fabric. Ensure timely dispatch of fabric to warehouse. Assist in fabric inspection and documentation as needed. Use MS Excel to manage stock data and create basic reports. Coordinate with the procurement and warehouse teams for inventory tracking. Maintain cleanliness and organization in the fabric storage area. Requirements: 10th or 12th pass (Minimum qualification). 6 months to 1 year of experience in a textile industry is preferable however freshers with basic knowledge in Ms. excel & those who can easily identify the Gsm & variety of the fabric can also apply. Basic knowledge of fabric types and ability to identify fabric GSM. Experience or familiarity with handling fabric stock is an advantage. Basic computer skills with working knowledge of MS Excel . Attention to detail and a systematic approach to work. Ability to follow instructions and work under supervision. Punctual, responsible, and proactive. Preferred Skills: Prior experience in textile, garment, or fabric store handling. Knowledge of fabric rolls, swatches, and storage procedures. Basic communication skills in Hindi and/or English. Salary: 12K Working Hours: 9am-6.30 pm Reporting To: Fabric Manager / Store In-charge Job Type: Full-time Pay: ₹10,000.00 - ₹12,000.00 per month Benefits: Leave encashment Schedule: Day shift Work Location: In person

Immediate joiner Experience : 1 year location : vallam sipcot , sriperumbatur .kanchipuram. Report any problems, difficulties, or unusual circumstances immediately to supervision; Check parts against prints; complete inspection reports;Inspect parts to established inspection procedures; Validate all Customer quality requirements have been met by reviewing in-process inspection, assembly and test records; Creation of Objective Evidence; document packages for presentation of customer; Maintain accurate records and other data as required; Perform a wide variety of final inspection duties with minimal supervision. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals; Able to fill out company inspection and production documents; Able to use a microscope; Proficiency using MS Windows, MS Office and Adobe software; Able to understand and use SPC theories and functions and blueprints; Good verbal communication, reading, and writing skills. Job Types: Full-time, Permanent, Fresher Pay: ₹12,000.00 - ₹16,000.00 per month Benefits: Food provided Health insurance Provident Fund Schedule: Rotational shift Supplemental Pay: Overtime pay Performance bonus Yearly bonus Experience: total work: 1 year (Preferred) Work Location: In person

Job Summary: The QA/QC Manager for the Machine Shop is responsible for overseeing all aspects of quality assurance and quality control in the manufacturing process. This includes ensuring that machined parts and assemblies meet customer specifications, industry standards, and regulatory requirements. The role involves developing and implementing quality control procedures, managing inspection teams, and driving continuous improvement initiatives to enhance product quality and operational efficiency. Key Responsibilities:1. Quality Management System (QMS) & Compliance: Develop, implement, and maintain the Quality Management System (QMS) in compliance with ISO 9001 and other relevant standards. Ensure adherence to customer specifications, industry standards (e.g., ANSI, ASTM, GD&T), and regulatory requirements. Conduct internal audits and lead external audits (customer, third-party, regulatory). 2. Inspection & Testing: Oversee in-process, final, and receiving inspections of machined components (CNC, turning, milling, grinding, etc.). Ensure proper use of measuring instruments (Micrometers, calipers, height gauges, optical comparators, etc.). Review and approve First Article Inspection Reports (FAIR), PPAP, and MSA documentation. 3. Process Improvement & Defect Prevention: Lead Root Cause Analysis (RCA) and Corrective & Preventive Actions (CAPA) for non-conformances. Work with Production, Purchase to resolve quality issues. Implement Lean Manufacturing & Six Sigma methodologies to reduce scrap, rework, and defects. 4. Team Leadership & Training: Supervise QC Inspectors, QC Engineers. Provide training on quality standards, inspection techniques, and documentation. Foster a culture of quality across the machine shop. 5. Documentation & Reporting: Maintain inspection records, non-conformance reports (NCR), and quality metrics. Prepare quality performance reports for management and customers. Ensure proper calibration and maintenance of inspection equipment. Qualifications & Skills: Education: Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or related field (or equivalent experience). Experience: 5+ years in QA/QC management within a precision machining or manufacturing environment. Strong knowledge of CNC machining, GD&T, and metrology. Experience with ISO 9001. Soft Skills: Strong leadership, problem-solving, and communication skills. Ability to work in a fast-paced, deadline-driven environment. Work Environment: Machine shop / Fabrication floor with office work. Job Type: Full-time Pay: ₹25,000.00 - ₹35,000.00 per month Benefits: Food provided Health insurance Leave encashment Schedule: Day shift Rotational shift Supplemental Pay: Yearly bonus Work Location: In person

Job Description Be part of the solution at Technip Energies and embark on a one-of-a-kind journey. You will be helping to develop cutting-edge solutions to solve real-world energy problems. We are currently seeking a Project Quality manager reporting directly to Head of Quality – IOC to join our Quality team based in Mumbai, Chennai & Delhi Operating Center s About us: Technip Energies is a global technology and engineering powerhouse. With leadership positions in LNG, hydrogen, ethylene, sustainable chemistry, and CO2 management, we are contributing to the development of critical markets such as energy, energy derivatives, decarbonization, and circularity. Our complementary business segments, Technology, Products and Services (TPS) and Project Delivery, turn innovation into scalable and industrial reality. Through collaboration and excellence in execution, our 17,000+ employees across 34 countries are fully committed to bridging prosperity with sustainability for a world designed to last. About the mission we offer you: To manage and coordinate Project quality assurance and quality control activities providing leadership, expertise and direction. To apply high level of competencies and capabilities (tools, procedures, organization and resources) in discharging quality assurance functions in the assigned projects (Engineering / EPC). To define the quality assurance and quality control execution methodology for the project assigned Represent project on quality matters with Client and stakeholders Relationship Responsibilities: Reports to: Head Quality - IOC Directly supervises (operationally): Nil Key Interactions: Internally: Project Managers, Other Department Managers/Project Leads (Engineering, Construction, QHSE, Procurement, P&C, Proposals, Subcontract, Planning, IT, Administration Externally: Clients Quality Representatives, PMC, Subcontractors Quality team, Third Party Inspection Agencies , Certification agencies. Major Responsibility Areas: Define and implement Project Quality Plan. Ensure implementation of Disciple Quality Plans where applicable. Establishment of an approved Project Internal IMS audit plan and schedule. Define and implement Project quality objectives / KPIs in liaison with Project management. Plan, schedule, conduct / participate in project internal IMS audit as per project internal audit plan and schedule. Follow up to ensure timely closure of audit findings ( internal / external). Develop and conduct Project quality inductions, where mandated. Facilitate Client / PMC audits in Projects and Home Offices. Liaise and coordinate with other Operating Centers on quality matters where the scope of work is shared. Conduct lesson learned workshops and quality awareness sessions. Participate in non-conformity investigations, root cause analysis and validate corrective action proposals. Review of Client / Contract quality assurance requirements and ensure collation, communication and maintenance of the same. Review of Project Quality Plan and procedures in liaison with Project Manager. Close coordination with Vendor performance Management and Site Quality Control on Quality performance Document and facilitate investigation into quality incidents and non-conformities customer complaints. Participate in Project quality reviews/ meetings. Participate in CNQ review and root cause analysis as needed. Starting Date: July 2025 About you: We love to hear from you and how you match this position. To be successful in this mission you should consider the following requirements: Bachelor’s degree in engineering Minimum 7 years of experience including experience of handling FEED, Detailed Design and EPC projects of large and complex nature. Familiarity with Project Life Cycle principles and significant project milestones Conversant with Quality Management System standard ISO 9001:2018 and related guidelines with familiarity on ISO 45001:2018 and ISO 14001 :2015 standards. Lead Auditor or Internal Auditor qualifications on ISO9001/ ISO45001/ ISO14001 desirable Proficiency in writing plans, procedures, process flow mapping, etc. Familiar with project / discipline objectives, targets, goals, KPIs and QHSE metrics Possess an investigative and analytical mindset Proficient in the use of root cause analysis methods (e.g. Fishbone, FMEA, FTA, ETA, 5 Whys…) Project management knowledge in a multi discipline engineering project is desirable Very good report writing skills Excellent management and leadership skills Excellent interpersonal and influential skills Knowledge on ASME/ API/ ASNT/ EN/ IS codes desirable Fluency in professional English Your career with us: Working at Technip Energies is an inspiring journey, filled with groundbreaking projects and dynamic collaborations. Surrounded by diverse and talented individuals, you will feel welcomed, respected, and engaged. Enjoy a safe, caring environment where you can spark new ideas, reimagine the future, and lead change. As your career grows, you will benefit from learning opportunities at T.EN University, such as The Future Ready Program, and from the support of your manager through check-in moments like the Mid-Year Development Review, fostering continuous growth and development What’s next? Once receiving your application, our Talent Acquisition professionals will screen and match your profile against the role requirements. We ask for your patience as the team completes the volume of applications with a reasonable timeframe. Check your application progress periodically via personal account from created candidate profile during your application. We invite you to get to know more about our company by visiting and follow us on LinkedIn, Instagram, Facebook, X and YouTube for company updates. Show more Show less

Job Summary: The Powder Coating Operator is responsible for producing high-quality, defect-free coated parts in a safe, efficient, and timely manner. The role involves operating coating equipment, ensuring accurate material mixing, maintaining cleanliness and safety of the work area, and supporting continuous improvement efforts. Key Responsibilities: Daily Work Execution Receive and follow daily work plans. Record production activities accurately. Coating Process Management Ensure correct powder and paint mixing ratios. Set and monitor spray gun parameters as per specifications. Quality Assurance Minimize defects, rework, and rejections. Adhere to inspection standards and quality requirements. Equipment & Workplace Maintenance Maintain cleanliness of machines and tools. Follow safety and 5S protocols. Issue Reporting Report any part damage or equipment issues immediately. Ensure spare parts are managed based on criticality. Production Targets Achieve production targets within the defined timelines. Contribute to on-time delivery performance. Continuous Improvement Participate in improvement initiatives and suggest enhancements for daily operations. Key Coordination: Internal: Supervisor, Technician, Team Members, HOD Reporting: Daily Production Reports, Final Inspection Reports, Breakage Reports, Evaluation Reports Required Skills & Attributes: Basic knowledge of powder coating equipment and process. Attention to detail and commitment to quality. Ability to work in a team and follow instructions. Familiarity with safety and 5S practices. Phone No: 9942976468 Mail Id: personnel@knitvelneedles.com Job Types: Full-time, Permanent Pay: ₹21,000.00 - ₹28,000.00 per month Benefits: Food provided Health insurance Life insurance Paid sick time Paid time off Provident Fund Schedule: Day shift Morning shift Weekend availability Supplemental Pay: Overtime pay Performance bonus Yearly bonus Work Location: In person

Homegenie Building Products Pvt Ltd req Quality Control Engineer Male Candidate preferred Interested candidate can send resume to this no : 9345910127 Work Location : Vanagaram Salary : 25,000 to 33,000 + Incentives Experience : 5 to 12 years of relevant experience Qualification : B.E/ B.Tech / Diploma in Mechanical, Civil, Industrial Engineering Address : No. 52, Service Road, Poonamallee Bypass Rd, Kanthamapuram, Vanagaram, Chennai, Tamil Nadu 600095 About Homegenie Building Products Pvt Ltd: Homegenie Building Products Pvt Ltd is a fast-growing manufacturer of high-quality building materials. With a focus on innovation and operational excellence, we maintain advanced, high-capacity production lines and equipment. To support our facility's continuous operation, we are hiring experienced technicians for high-voltage maintenance roles. Role Overview: We are seeking a diligent and quality-driven Quality Control Engineer to oversee and manage quality across all stages of production — from raw materials to post-production customer feedback. This role is crucial to ensuring the highest standards of product quality and customer satisfaction, while also supporting continuous process improvement in a fast-paced building materials manufacturing setup. Key Responsibilities : 1. Pre-Production Quality Assurance: Evaluate and approve incoming raw materials and components based on defined standards. Review supplier quality documentation and coordinate with procurement for material approvals. Collaborate with R&D and production teams to review product specifications and feasibility from a quality standpoint. Prepare pre-production inspection checklists and standard operating procedures (SOPs). 2. In-Process Quality Control: Monitor production lines to ensure adherence to quality protocols and standards (ISO, BIS, etc.). Conduct in-process audits and record deviations. Lead root cause analysis (RCA) and implement corrective and preventive actions (CAPA) for process non-conformities. Support calibration and maintenance of testing and measurement equipment. 3. Post-Production Inspection: Conduct final inspections and testing of finished products to verify compliance with specifications. Approve/reject batches based on test outcomes and maintain records. Develop traceability documentation and reports for each production lot. Coordinate with dispatch/logistics to ensure quality during packaging and transportation. 4. Customer Quality Support & Service: Handle and investigate customer complaints related to product quality. Visit customer sites when necessary to assess issues and propose technical resolutions. Maintain a customer feedback loop for continuous quality improvement. Collaborate with the customer service team to ensure prompt issue resolution and after-sales support. 5. Documentation & Compliance: Maintain and update quality manuals, test reports, control plans, and audit reports. Ensure compliance with industry standards and company policies. Participate in internal and external audits as the quality representative. Why Join Homegenie Building Products Pvt Ltd? A leading manufacturer & supplier of high-quality building materials Fast-growing company with strong career growth opportunities Work on innovative & challenging projects in the construction industry Share your resume on this mail : career@homegeniegroup.com Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹33,000.00 per month Benefits: Health insurance Provident Fund Supplemental Pay: Performance bonus Work Location: In person

A Compression Moulding Operator is responsible for operating and maintaining machinery used in compression moulding , a manufacturing process commonly used for shaping plastics, rubber, composites, and other materials into desired forms using heat and pressure. Key Responsibilities: Machine Setup & Operation: Prepare and load moulds and materials. Set up compression moulding machines with the correct settings (temperature, pressure, timing). Monitor machine performance during production. Material Handling: Weigh and mix raw materials as per specifications. Ensure the correct type and amount of material is used. Quality Control: Inspect finished parts for defects like bubbles, cracks, or incomplete filling. Measure parts using calipers, micrometers, or gauges. Ensure parts meet specification and report deviations. Maintenance & Safety: Perform basic maintenance like cleaning, lubricating, and replacing parts. Follow safety procedures and wear PPE (Personal Protective Equipment). Documentation & Reporting: Record production data and machine performance. Fill out inspection or shift reports. Skills & Qualifications: Understanding of moulding processes and materials (e.g., thermosets, rubber). Mechanical aptitude and attention to detail. Ability to read technical drawings and specifications. Familiarity with safety and quality standards in manufacturing. Job Types: Full-time, Permanent Pay: ₹19,000.00 - ₹30,000.00 per month Benefits: Food provided Leave encashment Provident Fund Schedule: Rotational shift Work Location: In person

Job Title: Quality Manager – Foundry Division Location: Chennai Department: Quality Assurance Reports To: Plant Head / General Manager – Operations Experience: 8–15 years in foundry quality management Salary: 13Lpa to 15Lpa Job Type: Full-time Roles and Responsibilities Conduct risk assessments of the Quality Control processes and ensure that identified risk control measures are implemented, including the identification and execution of preventive or improvement actions. Approve PAP (Production Approval Process) records related to the inspection and testing of samples and pilot lots before submission to the customer for approval. Verify Control Plans related to castings (both in-process and final inspections) as a member of the Cross-Functional Team (CFT). Make decisions on the acceptance of products based on metallurgical analysis after knockout and heat treatment processes. Identify training needs for team members or functions reporting to this role. Hold the authority to stop production and shipment of rough castings when deviations from quality requirements are observed, and ensure production resumes only after deviations are resolved. Responsible for the selection of special characteristics as part of the APQP process, in consultation with the Head of Department (HOD) and with a focus on rough castings. Define objectives for the Quality Assurance (QA) function. Monitor progress towards achieving business plans and quality objectives. Approve Corrective and Preventive Actions (CAPA) related to customer rejections and quality issues. Evaluate the effectiveness and efficiency of the Quality Control processes and initiate improvement plans where necessary. Approve external laboratories (service providers) for testing and calibration services. Review laboratory audit findings and initiate improvements based on the audit results. Approve laboratories based on collected information and audit outcomes (if audits are conducted). Approve test certificates issued for quality validation. Issue and control the Quality Manual and Procedure Manuals. Review and approve change requisitions related to updates in Procedure Manuals. Plan and conduct internal audits of the quality management system. Identify training needs related to the management system, including awareness training, internal audits, and training in specialized tools and techniques. Chair opening and closing meetings for internal audits. Plan and schedule follow-up audits to verify the effectiveness of corrective actions. Plan and organize management review meetings in alignment with business needs. Ensure timely distribution of Management Review Meeting minutes to relevant stakeholders. Review and update the list of external documents to ensure ongoing compliance. Coordinate and plan external audits in liaison with the certifying body. Contact: 9962173024-HR-Mounika Taizomounika@gmail.com Job Types: Full-time, Permanent Pay: ₹87,000.00 - ₹140,000.00 per month Benefits: Food provided Health insurance Provident Fund Schedule: Day shift Rotational shift Work Location: On the road

Desired Skill and Experience:  Only require candidates from Foundry domain. Roles and Responsibilities  Carrying out risk assessment of Quality Control Process and ensure that risk control measures identified are implemented including identification and implementation of preventive or improvement actions.  Approval of PAP records (related to inspection and testing of samples and Pilot lot) before sending to customer for approval.  Verification of Control Plan related to castings (both in process and final inspections) (as a member of CFT)  Decisions on acceptance of products based on metallurgical analysis after knock out as well as heat treatment.  Identification of training needs of functions (or roles) reporting to him.  Authority to stop the production and shipment (of rough castings) if necessary . When there are deviations from quality requirements (till the deviations are eliminated).  Responsible for selection of special characteristics as required as part of APQP (with regard to rough castings and in consultation with HOD.  Define objectives are formulated for QA  Monitoring the progress towards business plans and objectives related to QA Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹45,000.00 per month Benefits: Food provided Health insurance Provident Fund Schedule: Rotational shift Supplemental Pay: Performance bonus Yearly bonus Work Location: In person

As a Line Quality Engineer, you’ll be responsible for maintaining and improving product quality within manufacturing or production lines. Your primary duties include: 1. Quality Assurance: o Monitor production processes on the assembly line or manufacturing floor to ensure compliance with quality standards. o Conduct inspections, audits, and tests to identify defects, deviations, or non conformities. 2. Root Cause Analysis : o Investigate quality issues, identify root causes, and implement corrective and preventive actions. o Collaborate with cross-functional teams (such as production, engineering, and supply chain) to address quality-related challenges. 3. Process Improvement: o Continuously improve production processes to enhance quality, reduce waste, and increase efficiency. o Implement Lean Six Sigma principles, 5S methodology, and other quality improvement tools. 4. Documentation and Reporting : o Maintain accurate records of quality data, inspection results, and corrective actions. o Prepare reports and communicate findings to management and relevant stakeholders. Job Types: Full-time, Permanent Pay: ₹16,086.00 - ₹23,000.00 per month Benefits: Food provided Health insurance Provident Fund Schedule: Day shift Evening shift Monday to Friday Morning shift Rotational shift Supplemental Pay: Overtime pay Performance bonus Shift allowance Yearly bonus Work Location: In person

Description - Job Summary This role is responsible for designing and integrating quality requirements, processes, and practices into product development, design, and manufacturing. The role applies intermediate level of subject matter knowledge to solve complex business issues and drive continuous improvement. The role is pivotal in enhancing product quality and minimizing failure risks while adhering to established guidelines and policies. Responsibilities Position will be based in our two CM partner factories (about 10-20 km south/west from Sriperumbudur) Candidates are/will be local (live in Sriperumbudur/Chennai area and can daily come to the factory) Speak English and local language (Tamil) Candidate should have product quality/manufacturing experience preferably in electronics industry Good understanding of process/product quality, knowledgeable of IQC/IPQC/OQC and line/process audits (ISO, Agency, ESD, RM/FG handling, SOP, etc.) Strong quality tools knowledge/experience (RC/CAPA, 8D, Lean 6S, etc.) Good understanding of current PC technology/architecture and HW/SW Knowledge of programming/scripting and data mining/analytics is an advantage Working Mon-Fri, business hours Ability to support during weekends and out of business hours Factory presence 4 days/week, 1 day may work from home (depends on factory set-up, projects, pilots, production, etc.) Develops an understanding of the organization's inspection methods, quality guidelines, best practices, risk management practices etc. Designs and integrates quality requirements, processes, and practices into the development, design, manufacturing of a product or solution. Crafts test strategies using various test methodologies, builds test setups, automates test frameworks and tests plans. Analyzes and reviews portions of new product and solution designs and specifications for potential quality issues. Provides tangible feedback and proposes further changes to improve product quality and minimize risk of failures. Implements specified changes to product or process to reduce defects, improve quality, and lower costs. Works independently on moderate scope problems by applying professional expertise, exercising judgment, and resolving issues via root-cause analysis while following company policies and procedures. Consolidates and analyzes test reports, test data, and process results for assigned portions of components to identify trends and issues. Communicates product and process issue analysis to quality engineering leader and product team, and drives continuous improvement. Develops conclusions, recommendations, and written consolidated reports, contributing proactively through research, and sharing knowledge to foster a knowledge management culture. Knowledge and Skills: Understands PC architecture and components Knowledgeable of PCA manufacturing process and motherboard diagnostic/test Familiar with PC or 3C (computer, communication, and consumer electronics) products manufacturing processes Able to do a first level issue triage on manufacturing technical and quality issues Experienced with using engineering tools and software to evaluate products and manufacturing processes Self-motivated and proactive with demonstrated creative and critical thinking capabilities Able to fit in well with a team, understand capabilities and priorities while fostering a collaborative environment Able to effectively communicate project plans/proposals/results and to negotiate options at management levels Excellent written and verbal communication skills Fluent in English and local language Data driven with excellent analytical and problem-solving skills in manufacturing environment Education and Experience Required: Bachelor or master's degree in electrical, Test/Diags, Software Engineering, Mechanical, or equivalent Typically, 5-10 years of experience. 3-5 years of PC or 3C products related experience Knowledge & Skills Agile Methodology Auditing Automation Computer Science Continuous Improvement Process Corrective And Preventive Action (CAPA) Data Analysis Good Manufacturing Practices ISO 9000 Series New Product Development Pharmaceuticals Process Improvement Product Quality (QA/QC) Project Management Quality Management Quality Management Systems Risk Management Root Cause Analysis Test Automation Test Planning Cross-Org Skills Effective Communication Results Orientation Learning Agility Digital Fluency Customer Centricity Impact & Scope Impacts immediate team and acts as an informed team member providing analysis of information and limited project direction input. Complexity Responds to routine issues within established guidelines. Disclaimer This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management. Job - Engineering Schedule - Full time Shift - No shift premium (India) Travel - Relocation - Equal Opportunity Employer (EEO) - HP, Inc. provides equal employment opportunity to all employees and prospective employees, without regard to race, color, religion, sex, national origin, ancestry, citizenship, sexual orientation, age, disability, or status as a protected veteran, marital status, familial status, physical or mental disability, medical condition, pregnancy, genetic predisposition or carrier status, uniformed service status, political affiliation or any other characteristic protected by applicable national, federal, state, and local law(s). Please be assured that you will not be subject to any adverse treatment if you choose to disclose the information requested. This information is provided voluntarily. The information obtained will be kept in strict confidence. If you’d like more information about HP’s EEO Policy or your EEO rights as an applicant under the law,

Role Summary: The Quality Inspector is responsible for ensuring product quality at every stage—from receiving to final inspection—by adhering to company standards and ISO 9001:2015 procedures. The role involves inspection tasks, maintaining tools and equipment, ensuring workplace discipline, and actively contributing to continuous improvement and team goals. Key Responsibilities: Product Inspection: Conduct receiving, in-process, and final inspections. Ensure delivery of defect-free components to customers. Quality Compliance: Follow work standards, visual displays, and ISO 9001:2015 procedures. Ensure rejected parts are moved to the Non-Conformance (NC) area. Workplace Standards: Maintain 5S and good housekeeping. Follow safety protocols and use PPE as required. Tool & Equipment Management: Keep gauges, instruments, and hand tools in good working condition. Ensure personal tools/documents are not used by others without permission. Teamwork & Continuous Improvement: Participate actively in team activities (CFTs). Suggest improvements and support Corrective and Preventive Actions (CAPA). Use consumables efficiently and responsibly. Coordination & Reporting: Support departmental goals through coordination and tracking of quality metrics. Required Skills: Knowledge of quality inspection methods and measuring instruments. Familiarity with ISO 9001:2015. Basic understanding of CAPA and quality documentation. Good communication and teamwork skills. Attention to detail and commitment to product quality. Phone No: 9942976468 Mail Id: personnel@knitvelneedles.com Job Types: Full-time, Permanent Pay: ₹16,000.00 - ₹20,000.00 per month Benefits: Food provided Health insurance Life insurance Paid sick time Paid time off Provident Fund Schedule: Day shift Morning shift Rotational shift Weekend availability Supplemental Pay: Overtime pay Performance bonus Yearly bonus Work Location: In person