16407 Inspection Jobs - Page 11

The Clinical Research Associate is the clinical sites’ direct point of contact and accountable for managing site quality and delivery from site identification through close-out. The aim of this role is to build the relationship with the site, to be the sole position accountable for the site performance, including driving the site successfully to initiation, the development of a robust patient recruitment strategy, setting up a system, assessing compliance with regulations and the site’s capability to comply with the study needs and recruitment expectations, and problem solving to address and resolve site issues. This may include various tasks and roles within the CRA framework, contingent upon project phase and country demands, and complexity of the study. The Clinical Research Associate will oversee the conduct of the trial at designated sites, ensuring the rights and well-being of human subjects are protected, evaluating the quality and integrity of the reported data, evaluating the site efficacy of staff training and requiring retraining where necessary, developing strategy regarding patient recruitment, evaluating and building the relationship with the clinical site, using problem-solving to promote positive working relationships with the site and staff, and ensuring the conduct of the trial is in compliance with the currently approved protocol/amendment(s), with GCP and with the applicable regulatory requirement(s). The Clinical Research Associate might be asked to complete tasks on behalf of the Clinical Operations Leader after receiving appropriate training. Where available an “initiation Clinical Research Associate“ (iCRA) specializing in Pre SIV activities will be assigned & accountable for managing and driving the strategy for the Pre SIV / startup tasks of the study. The iCRA also support protocol amendments if applicable. In Japan for studies that are using Parexel SOPs, prior to SIV the iCRA will be responsible for preparing the initial site related IRB application and associated documents required prior to SIV as delegated by CRA, and reviewing and approving all essential documents (SRP, ICF etc.). Post SIV the iCRA would review / approve the documents as determined by Parexel SOPs (e.g. SRP & ICF). For studies that use client SOPs, the necessity for the iCRA role will depend on the contracted tasks / procedures; if the iCRA role is not required the CRA will cover all tasks necessary. Key Accountabilities: Maintenance (from initiation through close out): Act as PAREXEL’s direct contact with assigned sites, assess and ensure overall integrity of study implementation and adherence to study protocol at clinical sites, and perform problem-solving to address and resolve site issues. Build relationships with investigators and site staff. Facilitate and support site with access to relevant study systems and ensure sites are compliant with project specific training requirements. Evaluate if on-site staff assignment is still accurate and determine and implement corrective actions & follow-up, if necessary / relevant. Address and resolve issues at sites, including the need for additional training, potential deficiencies in documentation, and communication. Address/evaluate/resolve issues pending from the previous visit, if any. Follow-up on and respond to appropriate site related questions. Apply working knowledge and judgment to identify and evaluate potential data quality and data integrity issues. Determine and implement appropriate follow-up action. Actively participate in Investigator and other external or internal meetings and audits & regulatory inspections as required. Collect, review, and approve (if applicable) updated/amended site documentation, including regulatory documents as applicable. Evaluate site recruitment plan in collaboration with the site staff on an ongoing basis and provide strategy for improvements. Perform on-site visits; this includes Qualification and Initiation visits; apply judgment and knowledge to independently resolve site issues, questions and concerns. Conduct remote visits/contacts as requested/needed. Generate visit/contact report. Evaluate overall compliance and performance of sites and site staff: provide recommendations regarding site-specific actions and use judgment and experience to assess the ability and motivation of site staff. Assess & manage test article/study supply including supply, accountability and destruction/return status. Review & follow-up site payment status. Follow-up on CRF data entry, query status, and SAEs. Conduct on-site study-specific training (if applicable). Perform site facilities assessments Recognize impact of study non-compliance/issues/delays/changes on study timelines and communicate study issues that require immediate action, with proposed strategy for resolution Overall Accountabilities from Site Identification to Close out: Ensure timely and accurate completion of project goals and update of applicable trial management systems. Work with team members to meet project goals, provide strategy for efficient project planning and goal completion, and encourage the support of team members where required. Update all appropriate Clinical Trial Management Systems (CTMS) on an ongoing basis, including performing regular reviews of site level data in clinical systems (e.g. CTMS, EDC, IVRS, and SIS) and ensure timely and high quality data entry compliance from sites, manage and submit all relevant documents to the Trial Master File (TMF), ensuring first time quality, and distribute study documents to site including configuration of Investigator Site Files if applicable and on-going maintenance for completeness and quality. Ensure that assigned sites are audit and inspection ready Monitor and maintain compliance with ICH-GCP and applicable international and local regulations. Delegate administrative and other tasks to Administrative Support Team as needed and where appropriate. Guide Administrative Support Team members, review work, and provide feedback to manager regarding performance. Show commitment and perform consistent high-quality work. Maintain a positive, results-orientated work environment, building partnerships and collaborative relationships, communicating with team(s) in an open, balanced, objective manner, modeling the high performance culture values. Maintain a working knowledge of and ensure compliance with applicable ICH-GCP Guidelines, international and local regulations, Parexel SOPs, other Parexel / Sponsor training requirements and study specific procedures, plans and training. Ensure basic understanding of project scope, milestones, budgets, and strive for high quality, timely, and efficient delivery. Provide input and feedback for Performance Development Conversation(s). Proactively keep manager informed about work progress and any issues. Develop expertise to become a subject matter expert. Work in a self-driven capacity, with limited need for oversight. Complete additional tasks in a timely manner (e.g. timesheets, expenses, metrics, etc.) Skills: Sound problem solving skills. Able to take initiative and work independently, and to proactively seek guidance when necessary. Advance presentation skills. Client focused approach to work. Ability to interact professionally within a client organization. Flexible attitude with respect to work assignments and new learning. Ability to prioritize multiple tasks and achieve project timelines; utilizing strong analytical skills to make decision autonomously due to the unpredictable nature of the issues that arise. Willingness to work in a matrix environment and to value the importance of teamwork. Strong computer skills including but not limited to the knowledge of a Clinical Trial Management System (CTMS), Electronic Document Management System (EDMS), and MS-Office products such as Excel and Word. Strong interpersonal, verbal, and written communication skills. Sense of urgency in completing assigned tasks and ability to assist others to meet study/country deliverables and preserving patient safety. Effective time management in order to meet study needs, team objectives, and department goals. Developing ability to work across cultures. Shows commitment to and performs consistently high-quality work. Ability to successfully work in a (‘virtual’) team environment. Consulting Skills Great attention to detail. Able to accommodate extensive travel time requirements, according to tasks allocation/phase of the study assigned. Holds a driver’s license where required. Knowledge and Experience: Site Management experience or equivalent experience in clinical research, with understanding of clinical trials methodology and terminology Education: Educated to degree level (biological science, pharmacy, or other health-related discipline preferred) or equivalent nursing qualification or other equivalent experience #LI-REMOTE

Job Description:We are looking for a Quality Control / Quality Inspector to ensure that our manufactured spindles and components meet industry standards and customer expectations. The ideal candidate should have a strong eye for detail, knowledge of quality inspection processes, and experience in the manufacturing sector. 1 TO 2 YEAR EXPERIENCE MUST. Read and interpret blueprints, technical drawings, and work orders to understand specifications and requirements. Select the appropriate grinding wheels, machine settings, and tooling to match the material and desired finish. Load and secure the workpiece on the machine, ensuring it's properly aligned and centered. Operate the cylindrical grinding machine to grind workpieces to the required dimensions, shapes, and tolerances. Monitor the machine’s operation, adjusting feed rates, speeds, and depth of cuts to maintain quality and accuracy. Perform regular checks on the grinding wheels, replacing or dressing them as needed to maintain optimal performance. Benefits: Flexible schedule Health insurance Leave encashment Provident Fund NOTE- REQUIRE IMMIDIATE JOINERS FOR THIS POST INTERSTED CANDIDATE PLEASE WHATSAP CV ON SHARED NO 7982165380 Job Type: Full-time Pay: ₹15,000.00 - ₹25,000.00 per month Benefits: Provident Fund Work Location: In person

The Commercial (Execution) Department plays a vital role in ensuring smooth coordination between internal departments and the customer to facilitate the timely execution and dispatch of customer orders. The key responsibilities include: Work Responsibilities – Commercial (Execution) Department Receive and distribute the Work Order file to the Production, Inspection, and Planning departments. Scrutinize the commercial documents for completeness and accuracy. Identify any deviations and coordinate with the customer to obtain necessary amendments. Raise Advance Bills as per the terms of the order. Arrange for Security Deposits / Bank Guarantees as required; ensure submission and validate for any extensions or amendments needed. Follow up with: Production for delivery timelines. Purchase for material availability. Coordinate with the Inspection Department for material inspection and ensure inspection calls are sent appropriately. Obtain dispatch clearance from the customer, where applicable. Collect material dimensions from Stores for box making and packing. Invite and evaluate transport offers. Prepare and submit a Comparative Statement for transport approval by the Head of Department. Issue Service Orders to approved transporters. Arrange for insurance of materials prior to dispatch. Coordinate with the concerned department to update inventory part numbers. Verify the Packing List against the Inspection Report, periodically. Prepare Customer Orders in the system. Follow up with Stores for timely shipment. Generate Tax Invoices in the IFS system. Generate and validate the E-Way Bill. Follow up with the transporter for Lorry Receipt (LR) and verify upon receipt. Scan all relevant documents and send dispatch intimation to the customer. Collect all Inspection Documents. Prepare Inspection Documents for Spares, if applicable. Draft and send an Invoice Covering Letter to the customer including invoices, inspection documents, and bank guarantees. Share dispatch details with the customer, including docket number. Follow up with the customer for receipted challans, MRRs, etc. Ensure regular follow-up with customers for timely payment. Maintain and update the Outstanding Statement. Record and manage Customer Complaints. Collect EMD / SD / Bank Guarantees as required. Coordinate for Delivery Period Extensions, if facing delays (LD follow-up). Prepare all required closure statements, compile the final file, and submit it to the Head of Department for official closure. Job Types: Full-time, Permanent Pay: ₹35,000.00 - ₹40,000.00 per month Work Location: In person

We are looking for Sr. Engineer QC on urgent basis. Position: Engineer/ Sr. Engineer - QC Experience: 4 to 8 Years Qualification: Diploma/ BE. - Mechanical Engineering No. of Position: 01 Job Location: Chhatral GIDC, Phase - 2, Ta.: Kalol, Dist.: Gandhinagar - 382729 Job Description: Having experience in QC of Machine Shop/ Press Shop or in CNC/VMC Machine shop. Continuously improving quality control processes Monitoring and evaluating internal production processes. Developing and Improve quality control processes. Facilitate Customer Inspection & Third-Party Inspection. Develop Welding and NDT procedures and certify welders and train operators. Reporting to upper management on quality standard issues. Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹50,000.00 per month Benefits: Provident Fund Work Location: In person

Job Title: Site Engineer - Modular Furniture Job Description: We are seeking a skilled and detail-oriented Site Engineer to join our team at Behome in the modular furniture industry. The Site Engineer will play a crucial role in overseeing the installation of modular furniture at client sites, ensuring quality, safety, and timely completion. If you have experience in site engineering, a strong technical background, and a commitment to delivering excellence, we invite you to apply. Key Responsibilities: Site Inspection and Preparation: ● Conduct site surveys to assess conditions and requirements for furniture installation. ●Coordinate with clients and project managers to understand project scope and timelines. ●Ensure that all necessary tools and materials are available for installation. Installation Management: ● Supervise and lead installation teams to ensure work is carried out efficiently and according to design specifications. ● Oversee the assembly and installation of modular furniture, including workstations, cabinets, and fixtures. ● Ensure that installations meet quality standards and design requirements. Quality Control and Safety: ● Implement and enforce quality control procedures to maintain high installation standards. ● Conduct safety assessments and enforce safety protocols on-site. ● Address safety concerns promptly and ensure a safe working environment. Problem Solving and Issue Resolution: ● Identify and address any installation issues or challenges as they arise. ● Collaborate with project managers and client representatives to resolve issues and ensure client satisfaction. Documentation and Reporting: ● Maintain detailed records of site activities, including installation progress, materials used, and issues encountered. ● Prepare and submit daily and weekly site reports to project managers. Client Communication: ● Serve as the primary point of contact for clients and project stakeholders on-site. ● Provide regular project status updates and address client inquiries and concerns. Budget and Resource Management: ● Manage on-site resources effectively, including personnel and equipment. ● Ensure materials and equipment are used efficiently to minimize waste and costs. Qualifications: ● Bachelor's degree in Civil Engineering, Construction Management, or a related field (Master's degree is a plus). ● Proven experience as a Site Engineer or related role in the construction or furniture installation industry. ● Strong technical and problem-solving skills. ● Knowledge of modular furniture systems and installation methods. ● Excellent communication and interpersonal skills. ● Ability to work independently and lead on-site teams effectively. ● Strong organizational skills and attention to detail. ● Proficiency in relevant software and tools for site management and reporting EXPERIENCE IN INTERIOR DESIGNER FIRM ONLY Job Type: Full-time Pay: ₹18,000.00 - ₹30,000.00 per month Benefits: Health insurance Shift availability: Day Shift (Preferred) Willingness to travel: 100% (Preferred) Work Location: In person

We aspire to be world-leader in innovative telecom and security solutions by offering cutting-edge, high-performance telecom and security solutions to business customers. Our Mission is simple. To prove that Indian engineers can design, develop, and manufacture world-class technology products for customers across the world, right from India. Join our team of like-minded engineers, applied researchers, and technocrats with the will, courage, and madness to achieve this mission! Why work at Matrix Matrix fully integrates software and hardware across its products. Engineers here collaborate more effectively to create solutions that solve real problems and make an impact. We are responsible for every nut, bolt, and line of code in our products! As an engineer, your involvement will be critical in the entire lifecycle of a product - right from ideation-development-production-deployment. Get to feel the sense of accomplishment that comes with creating something that solves a real and pressing problem and is used by scores of customers. Job Description Role : Process Engineer (SME-Subject Matter Expert) Function : Process Design and Development Work Location : Vadodara, Gujarat Who are you You are responsible for developing and optimizing production processes to ensure the efficient, high-quality, and cost-effective production of the products (IP cameras). Your expertise will be process design, continuous improvement, quality assurance and automation, help manufacturers meet production targets, maintain product standards, and stay competitive in the rapidly evolving IP camera market. Technical Skills Required: 1.Process Design and Development: Manufacturing Processes: Design and develop efficient manufacturing processes for assembling IP cameras, including PCB assembly, lens installation, and housing assembly. Tooling and Equipment: Select and design appropriate tooling, jigs, fixtures, and machinery required for the manufacturing process. Process Documentation: Create detailed process documentation, including process flow diagrams, work instructions, standard operating procedures (SOPs), and assembly guidelines. 2.Production Optimization: Lean Manufacturing: Implement lean manufacturing principles to minimize waste, reduce cycle times, and improve overall efficiency. Continuous Improvement: Identify and execute continuous improvement initiatives using methodologies such as Six Sigma, Kaizen, and Value Stream Mapping (VSM). Capacity Planning: Conduct capacity planning to ensure production lines can meet demand and accommodate future growth. 3.Quality Assurance: Quality Control: Develop and implement quality control processes to ensure that IP cameras meet industry standards and customer expectations. Root Cause Analysis: Perform root cause analysis to identify and resolve defects or production issues. Statistical Process Control (SPC): Utilize SPC techniques to monitor and control production processes, ensuring consistent quality. 4.Process Integration and Automation: Automation Systems: Design and integrate automation systems, such as robotic assembly lines, automated optical inspection (AOI), and testing equipment, to enhance production efficiency and consistency. PLC Programming: Develop and program PLCs (Programmable Logic Controllers) for automated control of manufacturing processes. Integration: Ensure seamless integration of new processes and technologies with existing production systems. 5.New Product Introduction (NPI): Prototyping and Testing: Support the prototyping and testing of new IP camera models and components. Process Validation: Validate new manufacturing processes to ensure they meet design specifications and performance criteria. Launch Support: Assist in the launch of new products, providing technical support and troubleshooting during ramp-up. 6.Collaboration and Communication: Cross-Functional Teams: Work closely with design, engineering, production, quality, and supply chain teams to ensure alignment and successful project execution. Supplier Coordination: Collaborate with suppliers to ensure the quality and timely delivery of raw materials and components. Stakeholder Communication: Communicate process changes, improvements, and project updates to stakeholders, including management and clients. 7.Maintenance and Support: Preventive Maintenance: Develop preventive maintenance schedules to ensure the reliability and longevity of manufacturing equipment. Troubleshooting: Diagnose and resolve issues with production processes and equipment, minimizing downtime. Training: Provide training and support to operators and maintenance personnel on new processes and equipment. 8.Innovation and Technology Adoption: Emerging Technologies: Stay updated with the latest advancements in manufacturing technology, such as IoT, AI, and machine learning, and assess their potential application in IP camera manufacturing. Pilot Projects: Lead pilot projects to test and validate new manufacturing technologies and methodologies before full-scale implementation. Good to Have Skills: 1. Safety and Compliance: Safety Standards: Ensure that manufacturing processes comply with industry safety standards and regulations (e.g., OSHA, ISO). Risk Assessments: Conduct risk assessments and implement safety measures to protect workers and equipment. Environmental Compliance: Ensure that processes adhere to environmental regulations and sustainability goals, reducing waste and emissions. 2. Data Analysis and Reporting: Performance Metrics: Monitor key performance indicators (KPIs) to assess process efficiency, productivity, and quality. Data Analysis: Use data analysis tools to identify trends, bottlenecks, and areas for improvement. Reporting: Generate reports and presentations to communicate findings and recommendations to management. If you are an Innovative Tech-savvy individual, Look no further. Click on Apply and we will reach out to you soon!

ENSURE ADHERENCE TO QUALITY STANDARDS FOR WOELDING OPERATIONS. CONDUST INSPECTIONS AND AUDITS. PREPARE AND MAINTAIN QUALITY DOCUMENTATION. COORDINATE WITH PRODUCTION AND ENGINEERING TEMS TO RESOLVE QUALITY ISSUES. REQUIRMENT MIN 2 YEARS EXPERIANCE IN QA OR WELDING ENGINEERING STRONG KNOWLEDGE OF WELDING PRCESSES & INSPECTION TECHNIQUES GOOD CMMUNICATION AND PREBLEM-SOLVING SKILLS. Job Types: Full-time, Permanent Pay: ₹35,000.00 - ₹40,000.00 per month Benefits: Leave encashment Provident Fund Work Location: In person Speak with the employer +91 9767930976

TENDER EXECUTIVE Job description: Key Responsibilities: Prepare and process quotations and its follow-ups. Assist in tender/bid documentation, formatting, and submission. Maintain records of contracts, inspection schedules, and client documentation. Coordinate with internal teams and clients for commercial queries and compliance data. Track billing cycles, receivables , and support in preparing commercial MIS reports. Ensure timely renewal of contracts and client agreements. Help maintain data for audits and internal reviews related to commercial activities. Follow-up with clients for necessary documentation and payments. proficiency in MS Excel, Word, Outlook. Basic knowledge of commercial terms. good communication and interpersonal skills. Education: B.COM/BBA/BA Experience: 2 to 4 year of experience in a commercial support or business coordination role ,experience in service industry, inspection or statutory compliance domain preferred Job Types: Full-time, Permanent Benefits: Health insurance Provident Fund Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹30,000.00 per month Benefits: Cell phone reimbursement Health insurance Leave encashment Paid sick time Paid time off Provident Fund Work Location: In person

Location- Bamangam, Vadodara Industry:- Industrial Fabrication & Manufacturing (Expansion Joints, Industrial Dampers & Gates) About the Company Leading manufacturer and exporter of metallic and non-metallic expansion joints, industrial dampers, flexible metallic hoses, and related products. Serving industries such as power, steel, cement, oil & gas, petrochemicals, fertilizers, shipbuilding, and defense, we pride ourselves on engineering excellence and international quality standards. Role Overview The QC Engineer will be responsible for ensuring that all products meet stringent quality requirements before dispatch. The role requires a solid background in fabrication processes, familiarity with international standards, and the ability to coordinate with production teams and third-party inspection agencies. Key Responsibilities Inspect and verify fabrication work in accordance with design drawings and specifications. Ensure compliance with international standards such as ASME and relevant material codes. Oversee and participate in quality checks for industrial dampers, gates, and expansion joints. Maintain detailed inspection records and prepare quality reports. Attend third-party inspections and obtain necessary approvals. Monitor welding processes ( GMAW, GTAW, SAW, SMAW ) and raw material checks. Required Qualifications & Experience Diploma in Mechanical Engineering (DME) with minimum 7 years experience, OR B.E. in Mechanical Engineering with minimum 5 years experience. Proven work experience in the fabrication industry. In-depth knowledge of different grades of materials used in fabrication. Knowledge in Fabrication ( Familiar with GMAW, GTAW, SAW, SMAW, RAW MATERIAL & Welding process) Job Type: Full-time Pay: ₹400,000.00 - ₹600,000.00 per year Work Location: In person

y Responsibilities: Conduct routine inspections, tests, and checks on products, services, or processes to identify defects or deviations from quality standards. Maintain accurate and up-to-date records of quality tests, inspection results, and quality control procedures. Education: Bachelor's degree in a mechanical engineering. Job Type: Full-time Pay: ₹30,000.00 - ₹36,813.44 per month Benefits: Health insurance Work Location: In person

Job Title: Quality Control (QC) Engineer Industry: Oil & Gas Industry Experience: 5+ Years Location: Anand, Gujarat Qualification: BE /Diploma In Mechanicals Job Description: We are seeking a detail-oriented and proactive QC Engineer to oversee plant-related quality control activities. The role involves preparing job procedures, generating daily quality and inspection reports, and ensuring adherence to company policies and quality standards. The QC Engineer will support process improvements, resolve quality issues, and contribute to product reliability and performance. Key Responsibilities: Manage and coordinate day-to-day plant quality control operations. Prepare and maintain job procedures and inspection reports. Troubleshoot and resolve quality-related issues. Ensure compliance with company policies and industry standards (ISO, API). Document and analyze data related to product quality and processes. Support productivity improvements and cross-functional collaboration. Qualifications: Bachelor’s degree in Quality, Industrial, or Mechanical Engineering. Strong analytical, communication, and problem-solving skills. Knowledge of QC procedures, inspection tools, and defect analysis. Experience with documentation, reporting, and process audits. Familiarity with manufacturing and product development processes. With Regards Bhakti (HR) 9377865778 Job Types: Full-time, Permanent Pay: ₹420,000.00 - ₹450,000.00 per year Work Location: In person

Job Title: Inspection Engineer – Quality Control Location: GIDC - 2, Sanand Reports To: Quality Manager / QA Head Job Summary: The Inspection Engineer – Quality Control is responsible for ensuring that all products meet the company’s quality standards and specifications. The role involves inspecting materials, components, and finished products, identifying defects, and working closely with production teams to implement corrective actions. Key Responsibilities: Conduct inspections of raw materials, in-process components, and finished products to ensure compliance with quality standards and specifications. Prepare and maintain inspection reports, quality records, and documentation. Use measuring instruments and testing equipment to perform dimensional, visual, and functional checks. Identify non-conformances and coordinate with production or engineering teams for corrective and preventive actions (CAPA). Develop and implement inspection procedures, checklists, and quality control plans. Participate in audits, both internal and external, to maintain compliance with ISO, GMP, or other applicable standards. Collaborate with design, production, and supply chain teams to improve product quality and reduce defects. Monitor production processes for quality improvements and suggest process enhancements. Train and guide junior QC staff or operators on inspection techniques and quality standards. Ensure adherence to safety standards and company policies during inspections. Qualifications and Skills: Bachelor’s degree in Mechanical, Electrical, Electronics, or relevant engineering discipline. Prior experience in quality inspection or quality control, preferably in manufacturing or industrial environment. Knowledge of quality standards (ISO 9001, GMP, or industry-specific standards). Proficiency with measuring instruments like calipers, micrometers, gauges, and testing equipment. Strong analytical, observation, and problem-solving skills. Good communication skills and ability to work in a team environment. Attention to detail and commitment to maintaining high-quality standards. Preferred: Experience with QA/QC software or ERP systems. Certification in Quality Control/Inspection (e.g., ASQ, CWI) Job Type: Full-time Pay: ₹350,000.00 - ₹450,000.00 per year Benefits: Leave encashment Provident Fund Work Location: In person

Location: Halol, Gujarat, India Job ID: R0102462 Date Posted: 2025-08-13 Company Name: HITACHI ENERGY INDIA LIMITED Profession (Job Category): Engineering & Science Job Schedule: Full time Remote: No Job Description: The Opportunity: L ead a team of young and diverse technical team Hitachi Energy is looking for a Transformer bushing Quality control and service experienced professional for the Business Unit Transformer to join our innovative and forward-thinking team in Vadodara. In this role, you will ensure consistent quality by executing rigorous quality control processes for Bushings , addressing non-conformities, and supporting continuous improvement initiatives. This position offers the opportunity to drive quality excellence in Testing & Services , contributing to Hitachi Energy’s vision of delivering smarter and more sustainable energy solutions. How you’ll make an impact Quality Control Engineering work focuses on designing, developing, and implementing testing methods and equipment for products, components, and processes to ensure conformity to established quality protocols and standards including Planning and arranging the labor, schedules, and equipment required for testing. Providing the test area with parameters for routine testing and specifying tests to be performed. Compiling data and defining changes required to testing equipment, testing procedures, and/or processes Establishes and manages the bushing testing team and test lab , ensuring the availability of necessary resources, equipment, and processes for effective customer inspection and verification of finished goods before their release to the production/assembly unit for further dispatches to customers. Able to lead the type testing activities being conducted in the third-party test laboratories. Able to respond humbly as a first respondent for having any kind of service support. To get involved in the test laboratory establishment . Able to build, motivate , and guide team of testing and services to achieve common shared goals of the organization. Coor dinate with customer and capture VoC, capture CCRP case and log in the tool. Systematic problem solving , analyzes information effectively to identify the root causes of problems by using the appropriate methodologies in a systematic and structured way. Continuous Improvement Process Management : Applies principle of business process management to create processes for consistent results. Analyzes processes, identifies wastes and implements improvements which result in greater efficiency in delivering products and/or services. Develop solutions for the integration of complex multi-process activities required by business to achieve customer satisfaction Responsible for ensuring compliance with applicable external and internal regulations, procedures, and guidelines Contribute to audits, inspections, and verifications to ensure compliance with customer requirements and regulatory standards. Your background Degree in Electrical / Mechanical Engineering 7 to 10 years in testing and type testing of bushings and transformers Len Six Sigma Yellow Belt Strong understanding of quality management systems, regulatory requirements, and industry standards (e.g., ISO , IEC etc ). Proficiency in RCA and corrective and preventive action (CAPA) processes. Excellent analytical and problem-solving skills, with the ability to conduct root cause analysis and implement effective solutions. Strong communication and interpersonal skills, with the ability to work collaboratively across various teams and levels of the organization. Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process. This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.

Description The Opportunity: Lead a team of young and diverse technical team Hitachi Energy is looking for a Transformer bushing Quality control and service experienced professional for the Business Unit Transformer to join our innovative and forward-thinking team in Vadodara. In this role, you will ensure consistent quality by executing rigorous quality control processes for Bushings, addressing non-conformities, and supporting continuous improvement initiatives. This position offers the opportunity to drive quality excellence in Testing & Services, contributing to Hitachi Energy’s vision of delivering smarter and more sustainable energy solutions. How you’ll make an impact Quality Control Engineering work focuses on designing, developing, and implementing testing methods and equipment for products, components, and processes to ensure conformity to established quality protocols and standards including Planning and arranging the labor, schedules, and equipment required for testing. Providing the test area with parameters for routine testing and specifying tests to be performed. Compiling data and defining changes required to testing equipment, testing procedures, and/or processes Establishes and manages the bushing testing team and test lab, ensuring the availability of necessary resources, equipment, and processes for effective customer inspection and verification of finished goods before their release to the production/assembly unit for further dispatches to customers. Able to lead the type testing activities being conducted in the third-party test laboratories. Able to respond humbly as a first respondent for having any kind of service support. To get involved in the test laboratory establishment. Able to build, motivate, and guide team of testing and services to achieve common shared goals of the organization. Coordinate with customer and capture VoC, capture CCRP case and log in the tool. Systematic problem solving, analyzes information effectively to identify the root causes of problems by using the appropriate methodologies in a systematic and structured way. Continuous Improvement Process Management: Applies principle of business process management to create processes for consistent results. Analyzes processes, identifies wastes and implements improvements which result in greater efficiency in delivering products and/or services. Develop solutions for the integration of complex multi-process activities required by business to achieve customer satisfaction Responsible for ensuring compliance with applicable external and internal regulations, procedures, and guidelines Contribute to audits, inspections, and verifications to ensure compliance with customer requirements and regulatory standards. Your background Degree in Electrical / Mechanical Engineering 7 to 10 years in testing and type testing of bushings and transformers Len Six Sigma Yellow Belt Strong understanding of quality management systems, regulatory requirements, and industry standards (e.g., ISO, IEC etc). Proficiency in RCA and corrective and preventive action (CAPA) processes. Excellent analytical and problem-solving skills, with the ability to conduct root cause analysis and implement effective solutions. Strong communication and interpersonal skills, with the ability to work collaboratively across various teams and levels of the organization. Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process. This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.

Greetings from Aarvi Encon Limited! We have an opening for an Electrical Site Engineer position at Dahej (Gujarat) location. Job Description Execution & Planning of Electrical project & site work like-Coordinate & support design team over drawing & technical document. Inspection and testing of electrical panels, Motor, Earthing pit & DBs. Verifying BOQ and ensuring proper procurement; controlling material received and maintaining records. Provide regular updated to the project team and management on work performed, plan, budget and overall status. Conducting weekly and daily review meetings with the Project Manager & Contractor site engineer and resolving the site related issues and ensure site clearance is available to start the electrical activities. Monitoring, Scheduling of electrical activity, Coordination with contractors & execution of project. Manpower handling for on time project completion. Ensure all work the safety aspects as per EHS requirement. Making of as build drawing as per site according. Certification of material reconciliation statement. Certification of supply and installation RA bills and final bill. Bus duct erection. Making of Earthing Pits, Grid Earthing all panels, DBs and all electrical panels, Utility & Process Equipment Earthing etc. Critical spare parts management. Responsible for electrical and equipment by undertaking preventive and predictive maintenance work regularly. Preparation and submission final hand over work completion certificate document. Installation of Power and lighting Transformer, DG, HT/LT panel, PCC panel, iMCC panel, LDB, PDB, LP, ELP, Battery Bank. Installation of Wiring and Industrial light fitting, FLP, non FLP and commercial Light fitting. Installation of street light fitting and weather proof light fitting. Laying of Cable tray, HT/LT cable, power, control and Instrumentation and FAS cable. Skill Experience of pharmaceutical / Chemical projects is must. Electrical Site engineer, Commission, Electrical Project, electrical installation, electrical panel If interested, please share updated resume on shubhada@aarvviencon.com

Position Title: NDT Level-III Inspector Location: [Noida] Employment Type: Full-Time Role Summary We are seeking a highly skilled and certified NDT Level-III Manager with a B.Tech background to lead and manage our Non-Destructive Testing operations. The candidate will be responsible for developing NDT procedures, overseeing inspection teams, ensuring compliance with industry standards, and delivering quality results to our clients across multiple projects and sectors. Key Responsibilities Technical Leadership Develop, review, and approve NDT procedures in compliance with ASNT, ISO, and relevant industry codes/standards. Provide Level-III technical guidance and mentoring to Level-I and Level-II personnel. Evaluate and qualify new inspection techniques and equipment. Project & Operations Management Plan and manage NDT inspection activities for multiple projects simultaneously. Ensure timely execution of inspection tasks in alignment with project schedules and client requirements. Coordinate with project managers, clients, and vendors to ensure smooth execution of inspection work. Compliance & Quality Control Ensure compliance with ASME, API, ASTM, AWS, ISO, and other applicable codes. Review and approve inspection reports, test results, and certifications. Implement continuous improvement initiatives for inspection quality and efficiency. Training & Certification Conduct training, qualification, and re-certification programs for NDT personnel. Maintain records of personnel qualifications and certifications in line with company policy and industry standards. Qualifications & Requirements Education: B.Tech in Mechanical/Metallurgy/Production Engineering or equivalent. Certification: Valid ASNT/PCN/ISO 9712 NDT Level-III certification in multiple methods (UT, RT, PT, MT, VT; advanced NDT methods preferred). Experience: Minimum 10 years of NDT experience, with at least 3 years in a Level-III and managerial capacity. Knowledge: In-depth understanding of NDT techniques, codes, and standards; familiarity with advanced NDT methods is a plus. Skills: Strong leadership, analytical, and problem-solving abilities; excellent communication and reporting skills. Key Competencies Strong technical decision-making capability. Ability to manage cross-functional inspection teams. High attention to detail with a commitment to quality. Client-focused with strong interpersonal skills. Job Types: Full-time, Permanent Benefits: Provident Fund Work Location: In person Expected Start Date: 18/08/2025

Education Qualification - ITI Experience - Min 2 Yr Job Description: - Capable of Understanding 2D Drawings - Capable of Measuring with Micro Meter, Bore Gauge Etc. - Full Knowledge of GD & NT Parameters Job Type: Full-time Pay: ₹15,000.00 - ₹18,000.00 per month Benefits: Provident Fund Experience: total work: 2 years (Preferred) Work Location: In person

Job Title: Store Incharge Location: Ghaziabad Department: Inventory/Store Management Employment Type: Full-time Job Summary: The Store Incharge is responsible for managing the daily operations of the store, ensuring efficient stock management, maintaining accurate inventory records, and overseeing the smooth functioning of procurement and dispatch activities. The role requires strong organizational skills, attention to detail, and the ability to coordinate with multiple departments to ensure the availability of required materials. Key Responsibilities: 1. Inventory Management: Maintain accurate inventory records and update stock levels in the system. Monitor stock movements and ensure timely replenishment of goods. Conduct regular stock audits and reconciliation to minimize discrepancies. Implement effective inventory control measures to prevent loss, damage, or theft. 2. Store Operations: Ensure proper storage and labeling of materials for easy identification. Maintain cleanliness and organization of the store. Oversee the receipt, inspection, and verification of incoming goods. Ensure timely dispatch and delivery of materials as per requirements. 3. Procurement & Vendor Coordination: Coordinate with the procurement team to ensure the availability of necessary items. Liaise with vendors and suppliers to track order status and resolve issues. Verify invoices and ensure accurate billing and documentation. 4. Compliance & Safety: Ensure compliance with company policies and industry regulations. Maintain records of all transactions, receipts, and stock movement. Implement safety protocols and best practices for material handling. 5. Team Management & Coordination: Supervise store assistants and workers, ensuring efficient task execution. Train and guide staff on inventory handling and management procedures. Coordinate with various departments to fulfill their inventory needs. Key Skills & Competencies: ✔ Strong organizational and inventory management skills. ✔ Attention to detail and accuracy in record-keeping. ✔ Proficiency in inventory management software (e.g., SAP, Tally, ERP). ✔ Excellent communication and negotiation skills. ✔ Ability to work under pressure and meet deadlines. ✔ Problem-solving skills and proactive approach to store management. ✔ Knowledge of warehouse safety regulations and best practices. Qualifications & Experience: Education: Bachelor’s degree in Supply Chain Management, Business Administration, or a related field. Experience: 2-5 years of experience in inventory/store management, Technical Skills: Familiarity with stock management systems and MS Office. Work Environment & Benefits: Work Location: Ghaziabad Working Hours: 9 AM – 6 PM, Monday to Saturday Salary: Competitive, based on experience. Additional Benefits: Performance bonuses, leave encashment Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹30,000.00 per month Benefits: Leave encashment Work Location: In person

Job Description Company Overview: MaxVolt Energy Industry Limited is a leading manufacturer of lithium-ion battery solutions, catering to both EV and ESS segments. With a commitment to innovation, quality, and sustainability, we are expanding our logistics team to support our growing operations. Job Title: Quality Engineer Function: Quality Assurance Location: Ghaziabad Description: The Quality Engineer is responsible for overseeing the quality processes within the manufacturing unit, ensuring that our products meet the highest standards of excellence. Education: Bachelor of Engineering (BE) Bachelor of Technology (B. Tech) in Electronics & Telecommunication (E&TC) or Electronics, Master of Engineering (ME) Master of Technology (M. Tech) Quality control certification is advantageous. Experience: 3-4 years of post-qualification experience in a manufacturing setup. Work Profile: Li-ion Battery Manufacturing Process, ESD, and Reliability Testing: Oversee the intricate processes involved in manufacturing lithium-ion batteries, ensuring adherence to quality standards and reliability testing protocols. Monitoring and Evaluating Internal Production Processes: Regularly assess and analyse internal production processes to identify areas for improvement and ensure efficiency and effectiveness in operations. Evaluating Final Output of Products: Scrutinise the final output of products meticulously to ascertain their quality and conformity to specified standards, ensuring only high-quality products are delivered to customers. Conducting Electrical Parameter Testing: Perform rigorous electrical parameter testing of final finished battery products according to the control plan, ensuring they meet stringent quality requirements. Preparing and Maintaining Quality Records: Thoroughly document quality-related data, including preparing and maintaining quality records, MIS for system audits, and comprehensive documentation to ensure traceability and compliance. Creating Documents: Develop essential documents such as procedure inspection plans, work instructions, and quality assurance specifications to provide clear guidelines and instructions for quality-related processes. Ensuring Material Availability: Coordinate closely with relevant departments to ensure timely availability of materials as per the dispatch plan, facilitating smooth production operations. Approving Incoming Materials: Conduct thorough inspections of incoming materials, confirming specifications, and conducting visual and measurement tests to ensure compliance, promptly rejecting and returning any unacceptable materials. Analysing Major Scrap :Utilise various quality control tools to analyse major scrap, determining appropriate containment and permanent action in collaboration with the Cross-Functional Team (CFT) to prevent recurrence. Active Participation in 5'S and QUALITY CIRCLE: Actively engage in 5'S and QUALITY CIRCLE initiatives to promote a culture of continuous improvement and quality excellence among team members. Conducting Process Audits: Conduct regular process audits as per the schedule devised by the team, identifying areas of non-conformance and implementing corrective actions to uphold quality standards. Monitoring Customer Complaints: Monitor and address customer complaints promptly, implementing corrective actions and driving continuous improvement efforts to enhance customer satisfaction and loyalty. Identifying Laboratory Equipment Requirements: Identify the need for laboratory equipment and follow up with procurement processes to ensure the availability of necessary resources for quality testing and assurance. Educating the Team: Provide comprehensive training and education to the team on various quality methodologies and tools such as Kaizen, 5S, Poka-yoke, Process audit, and Quality Tools, fostering a culture of continuous learning and improvement. Maxvolt Energy Industries Pvt Ltd is an equal-opportunity employer committed to diversity and inclusion in the workplace. We encourage qualified individuals from all backgrounds to apply. Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹25,000.00 per month Benefits: Health insurance Provident Fund Work Location: In person

Title: Sr Officer QA- IPQA-API Date: Aug 14, 2025 Location: Dewas API - Quality Assurance Company: Sun Pharmaceutical Industries Ltd Job Title: Senior Officer Business Unit: Global Quality and Compliance Job Grade G12B Location : Dewas At Sun Pharma, we commit to helping you “Create your own sunshine” — by fostering an environment where you grow at every step, take charge of your journey and thrive in a supportive community. Are You Ready to Create Your Own Sunshine? As you enter the Sun Pharma world, you’ll find yourself becoming ‘Better every day’ through continuous progress. Exhibit self-drive as you ‘Take charge’ and lead with confidence. Additionally, demonstrate a collaborative spirit, knowing that we ‘Thrive together’ and support each other’s journeys.” Key responsibilities: Batch Release: To perform usage decision of finished product, Intermediate and recovered solvent batches and ensure all requirements as per SOPs, Specifications, Customer & Regulatory Commitments, Exhibit / PPQ Batch Protocol (as applicable) are complied prior to taking Usage Decision on a batch. To perform sampling and sample distribution of Finished Product & Intermediates as per SOP. Control and review of Batch production records of APIs, intermediate & recovered solvents of all API plants. To review of batch production records and analytical records before release of batches for distribution and to release delivery order. Preparation and review of Annual Product Review as per SOP. Management of Retention samples including annual inspection of API and to maintain related records. To perform following activities in Track wise (CQMS) system as per requirement. Sampling investigation QA review and verification tasks Initiation of change controls and investigation/deviation. To perform environmental monitoring of general API plants, preparation and review of trend and its evaluation as per SOP. To provide market and regulatory samples as per requirement. Generation, logging, monitoring and closure of TRF as per SOP. Trending of analytical data for APIs as per SOP. To provide accurate and adequate data to Marketing Regulatory Affairs department for filing to various regulatory agencies. Preparation and maintenance of finished product label in system for APIs and perform reconciliation of API FG labels. Work allotment and planning. To perform transport validation activity as per SOP. Handling of market returned materials as per SOP. Travel Estimate Job Requirements Educational Qualification B.sc/M.Sc / B.Pharm Experience Tenure : 2-5 Years Your Success Matters to Us At Sun Pharma, your success and well-being are our top priorities! We provide robust benefits and opportunities to foster personal and professional growth. Join us at Sun Pharma, where every day is an opportunity to grow, collaborate, and make a lasting impact. Let’s create a brighter future together! Disclaimer: The preceding job description has been designed to indicate the general nature and level of work performed by employee within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees as assigned to this job. Nothing herein shall preclude the employer from changing these duties from time to time and assigning comparable duties or other duties commensurate with the experience and background of incumbent(s).

About the company:- JS TechAlliance Consulting Private limited is a global IT solutions company that provides full-cycle services in the areas of software development, web-based enterprise solutions, mobile application design, and portal development. We combine solid business domain experience, technical expertise, profound knowledge of industry trends, and a quality-driven delivery model to offer progressive end-to-end web solutions. Our goal is to provide specialized mobile software and web business solutions while providing business consulting to our clients. Our team of Android/iOS/J2EE/Web professionals has rich IT experience and a better capability to understand your business world. We are looking for a QA Engineer to join our team to work on our latest Smart Home product. The candidate must be proficient in English, capable of providing, demonstrating the relevance and coherence of his/her solution and being experienced in documenting solutions. Role definition: QA Engineer is responsible for preparing test environments and executing tests, tracking and reporting, preparation of documents for orderly inspection processes. He/she is also responsible for ensuring compliance with established testing procedures, tools and methodologies. Requirements: QA experience in web or mobile applications Very good understanding of QA processes and responsibilities Knowledge of QA testing methodologies Experience in executing test cases and writing test documentation (STD, STP) Experience in test planning, execution testing and report defects Passion for technology A systemic vision and capability to go into details. Ability to work independently Good logical thinking Good communication skills in English Bachelor degree (advantage) Experience: 2-3 Years Experience Job Location: Indore Joining: Immediate Share Resume at talent@jstechalliance.com or can Contact here - 0731-3122400 [*Ask for Anjali (HR Department) ]* WhatsApp : 8224006397 Job Type: Full-time Application Question(s): Do you live in Indore? Can you attend an In-Office Interview? Education: Bachelor's (Required) Experience: Quality assurance: 3 years (Required) Language: English (Required) Work Location: In person

Candidates with Min. 1 year experience can apply for this position. The sites is Ujjain (Madhya Pradesh), Candidates residing around that area are preferred for this position. Responsibilities: · Material inspection by concerned engineer. · Maintain Day to day store records. · Material GRN (Goods Receipt Note). · Maintain Material issue registers. · Maintaining & monitoring materials status in Excel sheet. · Weekly spot material checking. · Monthly physical stock verification for reconciliation of material. · Receipt of incoming material according to indent. · Responsible for keeping Inward register, outward register and stock register. · Preparation of stock statement. · Implementations of store procedures. · Maintain proper housekeeping at site office and store office. · Maintain monthly stock report. · Daily reports and work should be done in the System without fail. Job Type: Full-time Pay: ₹14,000.00 - ₹20,000.00 per month Benefits: Provident Fund Experience: total work: 1 year (Preferred) Willingness to travel: 50% (Preferred) Work Location: In person

Ø Major Responsibilities Review of applicable contractual requirements (technical standards, specifications etc) Definition and review of QHSE drawings / files / plans and the relevant procedures review and validation of inspection assignment documentation (technical aspects, reference documentation, schedules, drawings, milestones, reporting, logistics, coordination procedure, etc) Definition of Bureau Veritas interventions Selection of the most appropriate inspection techniques Execution or supervision of inspection according to predefined QHSE plan and the established inspection procedures / techniques Execution of inspection reporting including Non-Conformities (NCR’s) and other applicable deliverables Ensuring quality of inspection according to BV Quality System Interpretation of results of survey or inspection Treatment of Non-Conformities / corrective actions Review and appraisal of inspection procedures Maintaining internal and external communication Design and delivery of training for customers and new surveyors Promotes Bureau Veritas service portfolio to clients Respects security guidelines of BV and safeguards personal security in the working environment Customer relation management regarding new rules and new products Actively participates in sharing of knowledge and information (Knowledge Management) Ø Roles & Responsibilities for HSE Must comply the BV Cardinal Safety Rules in all situations. To comply company HSE requirements e.g. policies, Procedures, guidelines etc. and local legal requirements on HSE as applicable To take care of own health and safety as well as colleagues and others. Immediate reporting of any shortcomings on HSE i.e. any incident, unsafe work practices / conditions to his/her immediate Line Managers. Sharing opportunities for improvement on HSE aspects. Ø Qualification Experience & Technical Knowledge Engineering Graduate / Diploma / B.sc (Electrical / Electronics / Instrumentation ) with min. 10 yrs of industry experience with 3-5 yrs experience in Oil& Gas sector. Knowledge of QA/QC is a must Knowledge about methodology required for the inspection activities Should have knowledge of IS, IEC,etc (National and International code ,standard & Specification) and customer requirements.

Job Title: Quality Control Inspector Location: Sankrail Industrial Park, Howrah, West Bengal Company: HR Steel Industries Pvt Ltd Experience: Minimum 3 years of experience in online inspection within a forging or similar industry Employment Type: Full-time Company Overview: HR Steel Industries is a dynamic and rapidly growing organization committed to delivering exceptional products to our customers. We foster a culture of innovation, teamwork, and professional growth. Job Purpose: We are looking for a proficient Quality Control Inspector with a minimum of 5 years of experience in online inspection within a forging or similar industry. The ideal candidate will be well-versed in ISO 9001:2015 standards and possess strong skills in using measuring instruments such as Vernier calipers, micrometers, and various types of thread gauges. Knowledge of galvanizing and electroplating processes is highly desirable. Key Responsibilities: Conduct online inspections of products to ensure adherence to quality standards and specifications. Use measuring instruments such as Vernier calipers, micrometers, and thread gauges to perform accurate measurements. Interpret and understand mechanical drawings to verify product dimensions and features. Inspect surface finishes and treatments like galvanizing and electroplating for quality compliance. Document inspection results and maintain detailed records of quality reports. Collaborate with production teams to address quality issues and implement corrective actions. Qualifications & Skills: Minimum of 5 years of experience in online inspection within a forging or similar industry. Proficiency in ISO 9001:2015 standards. Expertise in using measuring instruments including Vernier calipers, micrometers, and thread gauges. Ability to interpret mechanical drawings and understand product specifications. Knowledge of galvanizing and electroplating processes is advantageous. Strong attention to detail and quality orientation. Physical Requirements: Ability to perform inspections in a manufacturing environment, including standing and moving for extended periods. Why Join Us? Competitive salary and benefits package. Opportunities for career growth and professional development in a leading industrial company. How to Apply: If you meet the qualifications and are ready to contribute to our quality control efforts, please send your resume to hr@hrsteel.com. We look forward to hearing from you! Job Types: Full-time, Permanent Pay: ₹8,086.00 - ₹25,000.00 per month Benefits: Provident Fund Work Location: In person

JOB TITLE: COMPUTER OPERATOR We are seeking a diligent and reliable Computer Operator to manage and maintain our computer systems. As a Computer Operator, you will be tasked with managing batch jobs, maintaining databases, prioritizing workloads, and handling system errands. Computer Operator responsibilities include monitoring system performance, inputting and retrieving data, setting controls on computers and devices, and troubleshooting minor problems. Responsibilities Monitor and manage computer systems and networks Perform routine maintenance and inspection of equipment Input and retrieve data from databases Perform data backups and disaster recovery operations Ensure the smooth operation of central console management Identify system errors or issues and escalate accordingly Qualifications Proven work experience as a Computer Operator or similar role Strong knowledge of computer systems and networks Experience with data entry and data handling Excellent problem-solving skills Ability to handle multiple tasks MUST KNOW BASIC ENGLISH Salary: 16K-18K Job Type: Full-time Pay: ₹16,000.00 - ₹18,000.00 per month Experience: Computer operation: 1 year (Preferred) Language: English (Preferred) Work Location: In person