As a Validation and Verification Engineer, you will play a crucial role in ensuring the reliability, performance, and manufacturability of our Power Supplies, LED Lights, LED Displays, and Embedded Systems. Your responsibilities will include verifying PCB layout compliance, validating Bill of Materials (BoM), conducting performance and reliability testing, and facilitating a smooth transition from prototype to mass production. You will be responsible for verifying PCB layout adherence to design guidelines, EMI/EMC considerations, and thermal constraints. Additionally, you will ensure BoM accuracy by verifying component specifications, assessing sourcing feasibility, and identifying alternatives for critical components. In terms of performance testing, you will conduct electrical and thermal tests for Switched-Mode Power Supplies (SMPS), LED drivers, LED displays, and embedded systems. This involves validating input/output parameters, efficiency, surge protection, and voltage regulation across different operational conditions. Collaboration with the R&D team to debug and optimize designs will also be part of your responsibilities. Your role will also involve conducting reliability tests such as environmental stress tests, burn-in tests, and accelerated life tests to assess product durability. Ensuring compliance with industry standards such as BIS, IEC, and ISO is essential. Identifying potential failure points and implementing design improvements will be key areas of focus. During pilot runs and production validation, you will oversee production runs to confirm manufacturability and process stability. Collaboration with production teams to meet Design for Manufacturability (DFM) and Design for Assembly (DFA) principles will be crucial. Resolution of any yield or quality issues before mass production will also be part of your responsibilities. To qualify for this role, you should hold a B.E/B.Tech degree in Electronics, Electrical, or a related field and possess 6-7 years of experience in validation and verification of power electronics, LED lighting, or embedded systems. Hands-on experience with testing equipment like Oscilloscopes, Multimeters, Load Testers, and EMI/EMC Testing Equipment is required. Strong knowledge of SMPS, LED drivers, power electronics, and embedded system testing is essential, along with familiarity with industry standards such as BIS, IEC, EN, and UL. Cross-functional collaboration with R&D, Quality, and Production teams, strong problem-solving skills, and the ability to thrive in a fast-paced environment are key attributes for success in this role. Preferred qualifications include experience in automated test setups for power electronics validation, knowledge of failure analysis methods, and prior experience with power supply, LED drivers, or IoT-based embedded systems. Industry: Appliances, Electrical, and Electronics Manufacturing Employment Type: Full-time,
Company Description Innotronix Labs is a technology-focused company headquartered in Pune, dedicated to creating a smarter world through the power of technology. We build products using strong innovation capabilities and high standards of professional integrity to provide solutions on quality, cost, and time. Role Description This is a full-time on-site role for an Electrical Site Engineer at Innotronix Labs sites located in Kerala. The Electrical Site Engineer will be responsible for electrical testing, site supervision, electrical engineering, electricity, and electrical maintenance. The Electrical Site Engineer will ensure safe electrical practices, recommend cost-effective strategies, and troubleshoot issues that arise relating to electrical equipment. 1. Preparing for Site Visits: 1.1. Receive assignment details and travel plans from the project coordinator. 1.2. Review project specifications, safety guidelines, and objectives before each site visit. 1.3. Ensure you have all the necessary safety equipment, personal protective gear, and tools required for the specific site. 2. Travel and Accommodation: 2.1. Follow the provided travel itinerary and make necessary transportation and accommodation arrangements. 2.2. Keep the project coordinator informed about your travel status and estimated arrival time. 3. On-Site Activities: 3.1. Arrive at the site on time and report to the designated contact person. 3.2. Conduct a safety assessment and ensure that all safety protocols are followed, especially when working at heights. 3.3. Collaborate with the site team, including petrol pump dealers and officers, to understand project requirements and address any concerns. 3.4. Use specialized applications for live tracking of project progress, taking photos, and documenting site conditions. 3.5. Ensure that all work is carried out in compliance with industry standards and safety regulations. 3.6. Coordinate with any subcontractors or specialized service providers, if required. 3.7. Provide regular updates to the project coordinator and the company group regarding the site's progress, issues, and challenges. 4. Documentation and Reporting: 4.1. Capture completion photos and gather all necessary completion documentation. 4.2. Ensure that the petrol pump dealers or officers sign off on completion documents. 4.3. Share the completion photos and documents with the project coordinator for record-keeping. 4.4. Generate a completion letter from the site, if required, and obtain the necessary approvals. 5. Expense Management: 5.1. Keep accurate records of all travel-related expenses, including transportation, accommodation, and meals. 5.2. Use the company's customized app applications for submitting travel expense bills. 5.3. Ensure that expense reports are submitted promptly with all required receipts and documentation. 6. Safety and Compliance: 6.1. Adhere to all safety protocols and guidelines while working on heights, especially around canopies and monoliths. 6.2. Stay updated on the latest safety regulations and best practices. 6.3. Report any safety concerns or incidents immediately to the project coordinator. 7. Project Closure: 7.1. Ensure that the site is left in a safe and clean condition. 7.2. Hand over all project-related documentation and materials to the project coordinator. 7.3. Provide a final update on the project's status and any outstanding issues. 8. Continuous Improvement: 8.1. Participate in training and development programs to enhance skills and knowledge. 8.2. Share feedback and suggestions for improving processes and procedures within the company. Qualifications ITI-Electrician certificate required. Work experience as an electrician also preferred (6-12 months) Willingness to travel anywhere in India & work at heights on site. Excellent active listening and customer service skills. The ability to deal with multiple requests without being overwhelmed. The ability to remain professional under pressure. Superb work ethic and a growth mindset. Should be detail-orientated, deadline-driven, superb troubleshooting skills
DEPARTMENT: Quality DESIGNATION: Executive/Sr. Executive Experience: 3-4 Years Employment Type: Full-Time Job Summary: To ensure that third-party suppliers consistently deliver materials, components, and services that meet the company’s quality standards. The role involves monitoring supplier performance, managing quality issues, handling output rejections, and supporting continuous improvement initiatives. Additionally, the role requires line management of QA team members responsible for supplier quality activities. Key Responsibilities: Supplier Quality Management Develop, implement, and monitor QA processes for third-party suppliers. Conduct supplier audits and assessments to ensure compliance with quality standards and contractual requirements. Maintain supplier quality performance records and KPIs. Collaborate with suppliers for corrective and preventive actions (CAPA) 2.Output Rejection Handling Review and analyze rejected materials/components from suppliers. Initiate rejection reports and lead root cause analysis. Coordinate with suppliers for replacement, rework, or credit settlement. Track and reduce supplier rejection rates through structured problem-solving. 3.Line Management Supervise and guide a team of QA inspectors/engineers handling supplier quality. Allocate tasks, monitor team performance, and provide training where required. Support employee development, coaching, and performance appraisal activities. Process Improvement & Compliance Support the implementation of quality improvement projects with suppliers. Ensure adherence to ISO/TS/industry-specific standards. Facilitate knowledge-sharing sessions between suppliers and internal teams. Escalate critical supplier issues to management with data-driven insights. Key Skills & Competencies: Strong knowledge of supplier quality management processes. Expertise in rejection handling, RCA (Root Cause Analysis), and CAPA. Experience with ISO standards, QMS, and audit processes. Leadership and people management skills. Problem-solving and analytical thinking. Excellent communication and negotiation skills. Qualifications & Experience: Bachelor’s degree in Engineering E & TC / Quality Management or related field. Minimum 4–6 years of experience in QA, with at least 2 years in supplier quality management. Experience in leading a small QA team. Hands-on knowledge of tools like 8D, FMEA, SPC, and Lean Six Sigma preferred.
We are seeking an experienced Lead Quality Assurance to ensure the reliability, performance, and manufacturability of our Power Supplies, LED Lights, LED Displays, and Embedded Systems. The ideal candidate will be responsible for Inward Quality, Line Quality & Outward Quality. Key Responsibilities: 1. Inward Quality (Incoming Material Inspection) Oversee inspection of raw materials, bought-out items, and third-party supplies. Approve/reject incoming lots based on inspection results and quality standards. Coordinate with procurement/suppliers for corrective actions on non-conformities. Maintain vendor quality records and initiate supplier development actions. 2. Line Quality (In-Process Inspection & Control) Monitor quality checks at different stages of production. Ensure adherence to control plans, work instructions, and process parameters. Lead root cause analysis for in-process rejections and support corrective & preventive actions (CAPA). Provide guidance to operators and line inspectors for quality compliance. 3. Outward Quality (Final Inspection & Dispatch Quality) Ensure all finished products are inspected and conform to customer specifications. Authorize final product clearance for dispatch. Handle customer complaints, lead investigations, and implement permanent solutions. Maintain final inspection records and ensure traceability. People & Process Leadership Lead and guide a team of QA inspectors/engineers across shifts. Allocate inspection activities and monitor performance. Provide training on inspection methods, standards, and quality tools. Support internal/external audits and compliance with ISO/TS standards. Key Skills & Competencies: Strong knowledge of inward, in-process, and final quality control. Proficiency in problem-solving tools (8D, 5-Why, Fishbone, FMEA). Ability to manage a team and coordinate across departments. Good communication and reporting skills. Knowledge of quality documentation, ISO/QMS requirements Key Qualifications & Skills: Education: B.E/B.Tech in Electronics, Electrical, or related field. Experience: 3-4 years in Quality Assurance of power electronics, LED lighting, embedded systems, or related fields . Strong knowledge of SMPS, LED drivers, power electronics, and embedded system testing . Familiarity with industry standards like BIS, IEC, EN, and UL . Ability to work cross-functionally with R&D, Quality, and Production teams. Strong problem-solving skills and ability to work in a fast-paced environment.
As a Quality Engineer in the Quality department, you will be responsible for conducting final inspections and functional testing of lighting products to ensure compliance with internal standards and customer specifications. Your role will involve verifying product quality, safety, and design standards, as well as identifying and documenting any non-conformities for corrective actions. Key Responsibilities - Perform final inspection and functional testing of lighting products before dispatch. - Verify product compliance with design, quality, and safety standards. - Document any non-conformities and coordinate with production or design teams for corrective actions. - Ensure proper labeling, packaging, and documentation as per customer requirements. - Maintain inspection reports and quality records. - Calibrate and maintain inspection tools and equipment. - Participate in root cause analysis and continual improvement activities. - Support internal and external quality audits. - Train junior inspectors or production staff on quality standards and inspection techniques as needed. Requirements - Diploma/Degree in Electrical, Electronics, or Mechanical Engineering (or related field). - Minimum 2 years of experience in quality inspection in lighting or electrical product manufacturing. - Knowledge of lighting standards such as IEC, BIS, CE, and RoHS. - Familiarity with visual, mechanical, and electrical inspection techniques. - Understanding of inspection tools like multimeters, lux meters, vernier calipers, etc. - Basic knowledge of quality tools such as 5 Why, Ishikawa, and documentation practices. - Proficiency in MS Office and report generation. - Strong attention to detail, analytical thinking, and problem-solving skills. If you are a diligent and detail-oriented individual with hands-on experience in quality inspection of lighting products, this role as a Quality Engineer could be the next step in your career.,
The role involves maintaining and updating daily stock reports to ensure accurate inventory levels. You will be responsible for monitoring inventory discrepancies and assisting in reconciling issues. Additionally, you will track daily material shortages, provide timely updates to relevant stakeholders, and help in identifying and resolving shortage issues to maintain operational continuity. In terms of quality assurance, you will be checking the quality parameters of raw materials as per BOM and standards. You will also be responsible for ensuring the quality of Semi-Finished Goods (SFG) at the vendor end and maintaining quality reports. This position requires analytical and reporting skills, good communication abilities, problem-solving capabilities, knowledge of electronics testing and components, and proficiency in MS Excel and reporting systems. The ideal candidate should be an Engineering graduate or diploma holder with a background in Electronics & E&TC. Experience is not applicable as this position is open to freshers or those participating in internship programs. Industry focus for this role is in Appliances, Electrical, and Electronics Manufacturing, and the employment type is full-time.,