33 Inca Jobs

Expertise in ISO26262 Part 5 and Part 7 Experience in C programming Software function requirements creation BMS system or similar HV System expertise Expertise in Hardware Integration testing Good to have BMW tools experience (PTC Windchill Modeller, Creta, Codecraft, Codebeamer, Zedis, Inca, Ediabas) Detailed documentation necessary for achieving serial production standards Expertise in software requirements analysis Stakeholder management Good soft skills

knowledge on internal combustion engine and fuel injection technologies.Evaluate customer requirements & propose fuel injection system, hydraulic calibration & low pressure circuit measurements.instrumentation and calibration is added advantage. Health insurance Annual bonus Provident fund

Department: Research & Development / Powertrain Engineering Job Summary: We're seeking a skilled 2-Wheeler Engine Calibration Engineer to optimize the performance, fuel efficiency, and emissions. This role involves hands-on calibration, rigorous testing, and close collaboration with engineering teams to ensure our engines meet global standards and exceed customer expectations. Key Responsibilities: Engine Calibration: Develop and refine ECU calibrations for fuel injection, ignition timing, throttle control, and other parameters to achieve optimal power, torque, fuel economy, and driveability. Emissions & OBD: Ensure full compliance with global emission regulations (e.g., Euro, Bharat Stage) and calibrate On-Board Diagnostic (OBD) functions. Testing & Validation: Conduct comprehensive engine dynamometer and in-vehicle testing to validate calibrations, analyze data, troubleshoot issues, and ensure robust performance across various conditions. Collaboration & Documentation: Work cross-functionally with design, software, and homologation teams. Prepare detailed technical reports and maintain thorough documentation of calibration processes and results. Required Qualifications & Skills: Education: Bachelor's or Master's degree in Mechanical, Automotive, Electrical, or Mechatronics Engineering. Experience: 2+ years of experience in engine calibration, preferably with 2-wheeler internal combustion engines. Hands-on experience with dyno and in-vehicle testing is essential. Technical Proficiency: Proficient with engine calibration tools (e.g., ETAS INCA, ATI Vision, CANape). Strong understanding of Engine Management Systems (EMS) and control strategies. Familiarity with data acquisition and analysis tools Knowledge of global emission norms (e.g., Bharat Stage, Euro standards). Soft Skills: Excellent analytical, problem-solving, and communication skills. Ability to work independently and collaboratively in a fast-paced environment. Role & responsibilities Preferred candidate profile

Kindly share cv on sv17@svmanagement.com Summary of the Role: Engine testing and calibration. Vehicle functional calibration, OBDII calibration. DPF and SCR calibration and Monitoring Field issue, COP issue analysis. Experience in field failure analysis and problem solving. Key Skills for the Role : INCA , VISU hands on experience, Puma test handling, Data analysis tools Details of the Job : Experience with diesel engines development, engine subsystem, or component development. Exposure and proficiency with engine test lab equipment, data acquisition, and data analysis tools, for example, hands on experience in Calibration software (INCA, VISU, etc.), expert knowledge of data analysis software (Uniplot, AVL Concerto, MATLAB etc.) and data management tools (AVL - PUMA CAMEO, Indicom etc.) Experience in Calibration, Testing, Analysis and Optimization to achieve engine/ vehicle performance and emission targets (exclusively BS6 related) including HW Selection steady state emission optimization, emission development on transient dyno or chassis dynamometer. DSM checks and verification, Fault handling and error diagnosis Prepare/ understand EMS calibration requirement document. Knowledge of CMVR test procedures and legislation (BS6 specific) both ED and CD Route projects (WHSC, WHTC, WLTP, RDE, In-Service, IUPR etc.) DPF and SCR calibration and Monitoring Field issue / COP issue analysis/ Other supports, Experience in field failure analysis and problem solving Hands on experience on Test Instrumentation Knowledge of ETAS tool Knowledge of sensors, actuators and wiring harness Able to use Mass Emissions, Chassis Dyno & Engine Dyno instrument

Role & responsibilities Calibration Engineer Preferred candidate profile Proficiency in tools such as INCA, MDA, CRETA, Concerto, and Optisim. Strong understanding of electrical systems, multiplexing, and PID control systems. Valid drivers license and necessary permits for testing. Experience in calibration for emissions, ECO modes, and regulatory compliance Automotive development tool ( ETAS INCA calibration and data analysis instruments & ETAS MDA). Electronics, mechanics, engine control algorithms. Base Engine, Emissions and driveability experience and knowledge OBD diagnosis (Catalyst, Lambda Probe, Misfiring, etc.) and Safety experience and knowledge Knowledge of automotive mechanical and electronic component and basic principle of electronics. Basic knowledge/ Hands on experience of tools like INCA/ VISU/ DoE/ Matlab/ ETAS tools Knowledge of vehicle integration, vehicle level functions, Usage of PC and Office Automation tool In-depth knowledge of Engines / Gasoline / CNG / Transmission / Vehicle

Qualification: ME / BE: ETC / Mechatronics/ Automotive Electronics Roles Responsibilities: Domain (Brake Air functions) Design and implementation of HIL test bench Developing and optimizing HIL simulation models, rest bus simulation and software. Test Development validation for control software functions and strategies based on system/test architecture. Test-Level HIL and system test Working in an agile international team Development of test methods, test specifications, Execution of Tests, Reporting The candidate would need to interact and align with global group companies and external partners for development areas. Must Have Working knowledge of ASM plant models and its model-based development in MATLAB and Simulink. Experience in creating simulated ECUs, rest bus simulation, ECU Architecture (AUTOSAR) Working experience in Automotive Braking ECUs Experience with CAN, LIN, J1939, Ethernet, Flashing Diagnostic protocol Experience with dSPACE tool chain - Configuration Desk, Control Desk, Automation Desk, SYNECT Vector Tools like CANoe / CANanalyser, INCA etc Strong analytical and problem-solving skills. Flexibility for international travel (e.g. 3 months) Good to Have Experience with V Model software development, Lean Agile ISTQB certification, Functional Safety, ASPICE CI/CD pileline, Version and requirement management tools like JIRA, Confluence, SVN etc. Software skills: MATLAB/Simulink, dSpace Control Desk, Configuration Desk, Automation Desk, Synect, Python, CANoe

Qualification: BTech/Mtech - Electronics / Electricals / Automobile Roles: Test Design Testing for Engine ECU Dataset: Test Level: Various testing for ECU dataset at HIL test setup. Domain: HIL Testing (Dataset Validation) Team Environment: Working in an agile international team. Responsibilities: Requirement understanding Requirement Mapping Development of test specifications Test automation Execution of tests Test reporting Collaboration: The candidate will interact and align with global group companies of TRATON Group and external partners for testing and development areas. Must have: Experience with HIL testing for automotive ECUs Understanding of Engine functionalities, Emission Norms Good knowledge of CAN, UDS, LIN protocols Understanding of the complete HIL environment and various HiL tests Hands-on experience in powertrain-related ECU testing, flashing, and debugging Basic knowledge of project and issue management systems like JIRA is preferable ISTQB - Foundation Level certification Flexibility for international travel (e.g., 3 months) Good analytical and problem-solving attitude Positive attitude and curiosity to learn and implement new things Software Skills: dSPACE ControlDesk Python (Basics), UML Vector Tools (CANape, CANoe) EXAM tool JIRA / Confluence INCA (Calibration tool)

Qualification: B.E. (EE, ETC, Instrumentation) Roles Responsibilities: Good know how about Environmental engineering domain Understanding of impact categories, decarbonization methodologies Intervention methods to reduce the environmental impact Excellent communication skills Proficient in MS office tools Motivated eager to learn new things out of the domain Should have interest in Automotive field Must Have: Minimum 4 years of experience in functional safety projects Understanding of Automotive Functional safety Cybersecurity according to ISO 26262 ISO/SAE 21434 respectively Good to Have: Certification for Automotive Functional Safety Engineer Automotive cybersecurity engineer Audit experience (desirable) Good communication and presentation skills Knowledge about automotive electronics and product development Positive attitude, adaptable to changes, Self-motivated, Reliable, Time management Organization Skills Flexibility for international travel (e.g. 3 months) Software Skills: MS Office, JIRA Language skills: Must be fluent in English

Role & responsibilities Proficiency in tools such as INCA, MDA, CRETA, Concerto, and Optisim. Strong understanding of electrical systems, multiplexing, and PID control systems. Valid drivers license and necessary permits for testing. Experience in calibration for emissions, ECO modes, and regulatory compliance Automotive development tool ( ETAS INCA calibration and data analysis instruments & ETAS MDA). Electronics, mechanics, engine control algorithms. Base Engine, Emissions and driveability experience and knowledge OBD diagnosis (Catalyst, Lambda Probe, Misfiring, etc.) and Safety experience and knowledge Knowledge of automotive mechanical and electronic component and basic principle of electronics. Basic knowledge/ Hands on experience of tools like INCA/ VISU/ DoE/ Matlab/ ETAS tools Knowledge of vehicle integration, vehicle level functions, Usage of PC and Office Automation tool In-depth knowledge of Engines / Gasoline / CNG / Transmission / Vehicle

Devya Hotels and Resort Pvt Ltd is looking for GRE Professional to join our dynamic team and embark on a rewarding career journey Gre is responsible for various tasks including planning, execution, and management of related duties They should possess relevant skills and experience to excel in this role Duties include teamwork, problem-solving, and achieving organizational goals Candidates must have strong communication and technical abilities Responsibilities include project management, strategy execution, and performance optimization (More details as per role requirements )

Responsible for complete Engine/transmission control software calibration and validation Lead the system DFMEA/FTA activity experience of tools like INCA/ VISU/ Canoe/ Matlab/ ETAS tools CAN protocols, UDS services, IVN and diagnostics Required Candidate profile CAN protocols, UDS services, IVN Good Communication Skills Should be hands on experience Calibration in Petrol, CNG, Gasoline Hybrids / AMT / DCT/ EV’s, BS6

Must have experience safety and diagnosis calibration domain diagnostic tools and software (CANalyzer, Diagnostic Link, INCA), functional safety standards (ISO 26262) safety analysis techniques (FMEA, FTA), ECUs,, diagnostic protocols ( OBD-II, UDS). Required Candidate profile Min 8 years of experience in Powertrain (engine or transmission) safety and diagnosis calibration domain Min 2 year of experience to manage complete project delivery. Should be BE/B Tech /ME/ M. Tech

In-depth knowledge of Transmission, Engine Experience of tools like INCA/ VISU/Canoe, Matlab, ETAS tools Knowledge of vehicle integration, vehicle level functions, usage of PC, automation tool CAN protocols, UDS services, IVN, ECU, TCU , diagnostics Required Candidate profile Candidates must have experience in R&D of Calibration (Engine & Transmission/ Powertrain) for IC Engine, Gasoline, LPG, Petrol, CNG engines Min experience 4+ Yrs in relevant Industry

Complete ECS /TCS SW calibration & validation. Definition for drivability, performance, emission, fuel economy improvement, calibration data & integration defining the engine torque interface with engine system to meet gearshift & Clutch calibration, Required Candidate profile knowledge about new technology like BS-6, Hybrids, AMT, DCT., ECS /TCS of System Calibration, OBD Diagnosis, ETAS INCA, Matlab, CAN, JIRA, EOBD, Calibrate validate diagnostics, EOBD functional safety

brigosha technologies is looking for Senior Functional Safety Engineer to join our dynamic team and embark on a rewarding career journey We are seeking a dedicated and detail-oriented Safety Engineer to join our team As a Safety Engineer, you will be responsible for identifying and mitigating potential safety hazards in the workplace and ensuring compliance with safety regulations and standards You will work collaboratively with cross-functional teams to develop and implement safety policies, procedures, and training programs to promote a safe and healthy work environment Responsibilities:Conduct thorough risk assessments and safety audits to identify potential hazards in the workplace Develop and implement safety policies, procedures, and guidelines to ensure compliance with local, state, and federal regulations Collaborate with cross-functional teams to assess and mitigate risks associated with new processes, equipment, or facility modifications Provide safety expertise and guidance to project teams during the design and implementation of new projects or processes Develop and deliver safety training programs to educate employees on safety protocols, emergency response procedures, and best practices Investigate incidents and accidents, analyze root causes, and develop corrective action plans to prevent reoccurrence Maintain accurate safety records, including incident reports, inspection findings, and safety-related documentation Stay updated with industry trends, emerging safety technologies, and regulatory changes, ensuring compliance with the latest standards Conduct regular safety inspections and audits to ensure ongoing compliance and identify areas for improvement Collaborate with vendors and suppliers to evaluate and select safety equipment and personal protective gear Foster a culture of safety awareness by promoting proactive safety practices and encouraging employee engagement in safety initiatives

As a vehicle test engineer to perform powertrain electrical components. Technical/ Functional: Knowledge of System level testing and basic understanding of engine electrical components like Alternator, Starter motor, ECU, Sensors, Battery etc. Hands on experience of different electrical equipment s like Oscilloscope, datalogger, Multi-meter etc. Vehicle level testing as per specific standard for electrical components evaluation. Planning and execution of testing as per project timeline Data Analysis and report preparation Benchmarking of different vehicles. Knowledge of different test software like INCA, CANoe, Can Analyser etc. Actively participate in the testing and deliver results on time Maintenance and calibration of different lab equipment and machines. Creating test procedures and SOP for safe work environment Behavioral Self-motivated, flexible and a team-player Evidence of strong networking skills Good communication skills

•PPAP APPROVAL FOR NEW PARTS DEVELOPMENT • NEW PARTS DEVELOPMENT TECHNICAL ACTIVITY FOR POWERTRAIN PARTS • Knowledge of quality systems such as QC tools, GD&T, SPC, MSA, PFD, FMEA, Control plan etc., • DRIVABILITY ISSUES ANALYSIS & EVALUATION SKILLS RELATED TO POWERTRAIN • ECU & TCU S/W FLASHING (PT CODIING) BY USING INCA TOOL • CAN DATA MONITORING THROUGH INCA & CANOE • INCA DATA ANALYSIS & CALIBRATION DATA VERIFICATION through MDA • RIDE & DRIVE (Real road test) ACTIVITY RELATED TO POWERTRAIN • POWERTRAIN DURABILITY ISSUSE DIAGONISIS & ANALYSIS • KNOWLEDGE ABOUT COST SAVING & VALUE ENGINEERING PROPOSALS • KIN VEHICLE CCL LIST VALIDATON FOR POWERTRAIN PARTS • SYSTEM VALIDATION FOR POWERTRAIN BASIC EMISSION RELATED UNDERSTANDING

*Gasoline/CNG/Flex fuel working experience. *MPFI/GDI engines. *Base calibration on test bed and vehicle. *Transient, Idle, startability,Emission,OBD-1 and OBD-2B calibration. *Drivability and test trips experience. Health insurance Annual bonus Provident fund

Roles & Responsibilities NVH level target setting for powertrain. NVH evaluation of powertrain and the achievement of defined unit level targets. Execution of advance powertrain projects including Flex fuels / Biofuels / HEVs etc. Knowledge of Modal Analysis, Transfer Path Analysis to solve complex NVH issues. Summarization of findings along with objective evaluation of counter-measure effectiveness. Tracking the trend of future powertrain technology and their NVH impact. Interact regularly with Market Quality, New development quality and Engineering Design Departments. Competencies Relevant work experience in Powertrain NVH (ICE/Hybrid/EV/ Alternate fuels ICE ) Know-how of NVH characteristics of engine and its subsystems. Understanding of new model/unit design & development. Experience of unit testing on engine dynamometers and anechoic chamber operation. Skills in using software like IMC FAMOS, CONCERTO, INCA and other NVH tools like Siemens Test lab. Hand-on experience in operating the Engine dynamometer and anechoic chamber facilities Qualification B.E. / B.Tech / Diploma in Mechanical / Automobile / Production / Electrical Engineering. Minimum 60% marks 4-10 years of experience

We have an urgent opening with our esteemed client. Our client is a leading company in 2-Wheeler industry. Designation : Engine Calibration Engineer Experience : 2 Years experience in Engine Calibration Location : Chinchwad MIDC, Pune Roles & Responsibilities : Engine Calibration : Develop and refine ECU calibrations for fuel injection, ignition timing, throttle control, and other parameters to achieve optimal power, torque, fuel economy, and driveability. Emissions & OBD: Ensure full compliance with global emission regulations (e.g., Euro, Bharat Stage) and calibrate On-Board Diagnostic (OBD) functions. Testing & Validation : Conduct comprehensive engine dynamometer and in-vehicle testing to validate calibrations, analyze data, troubleshoot issues, and ensure robust performance across various conditions. Collaboration & Documentation : Work cross-functionally with design, software, and homologation teams. Prepare detailed technical reports and maintain thorough documentation of calibration processes and results. As the requirement is a bit urgent, an early response on this would be highly appreciated. Alternatively, if you know someone suitable and available please share atcshakil.shaikh@upgrad.com Regards, Shakil

Dhruv Global School, Pune, Sus-Lavale Road is looking for TGT Professional to join our dynamic team and embark on a rewarding career journeyTgt is responsible for various tasks including planning, execution, and management of related duties. They should possess relevant skills and experience to excel in this role. Duties include teamwork, problem-solving, and achieving organizational goals. Candidates must have strong communication and technical abilities. Responsibilities include project management, strategy execution, and performance optimization. (More details as per role requirements.)

Please share your CV on sv17@svmanagement.com Job Summary: Genset application level system engineer for testing and development of genset projects in coordination with engine R&D for Electronics/electrical and mechanical interfaces Role / Responsibilities Role consist in part of technical project Steering in part of Genset testing and electrical electronics system level integration in terms of genset controllers, WH and EMS. To steer the definition of the various electrical/electronics and mechanical interfaces, schematic and architecture Complete system level knowledge for Genset cum application level testing, validation and project coordination with engine R&D Using Test standers and standard level taking the Engine and Genset system integration Fault finding and Troubleshooting the electrical interferences on Genset with engine management system Good Knowledge on Genset controller development, Oscilloscope, INCA and MDA & CAN communication tools for test data acquisition and data analysis To develop and Lead cooperation Genset application level projects To develop and optimize cross platform solutions/ working/relationship/ continuous interaction with development team and deliver with quality in committed time. To focus on Project and Genset testing/ development, system architecture, Coordination and reporting along with solutions for field failure issues

Drive improvements in 3M , 12WM ,36WM & WM Claims Analyze warranty claim data from the field, update part analysis status, and reporting to top management Monitor and trend top field claims, initiating focused actions for root cause identification and issue resolution. Validate corrective measures (CM) through part duplication tests in durability test vehicles . Prepare and implement Early Warning Feedback (EWF) and 100% securing plans for all new project launches. Implement child part cost reduction , Refurbishement strategies to reduce claim costs. Plan and conduct supplier audits to ensure robust process control and adherence to quality standards. Manage preparation and approval process for field campaigns and recall actions . Generate Vehicle Identification Number (VIN) lists for campaigns based on issue severity and risk prioritization. Create and release Technical Information Bulletins (TIB) and Technical Service Bulletins (TSB) to guide accurate diagnosis and minimize incorrect claims at the dealership level. Conduct dealer visits for critical or safety-related field issues, performing on-site analysis and providing immediate technical feedback and support. Utilize INCA to perform measurement, calibration, and diagnostics on ECU-controlled powertrain components. Experience with combustion engines ,Electric powertrains and ECU validation processes. Experience with Vector tools (CANalyzer, CANoe).

Calibration Engineer Location : Pune, Gurgaon Job Description We are looking for experienced Calibration Engineer, capable of leading and technically developing a team of Application Engineers, who will be assigned to the following responsibilities: Manage the assigned Application Projects/Workpackages fulfilling the defined constraints on timing, quality and costs. Define and update the Application project plan for the assigned Projects. Manage with pro-active approach the project plan changes during the development phase. Lead and coordinate a team of application engineers allocated to the Application Projects. Manage calibration datasets integration and evolution Adopt calibration methodologies, procedures and tools shared by Marelli HQ. Promote effective solutions together with Marelli HQ Application and Functions Design Teams Guarantee the compliance of calibration process workflow with the standards defined by Marelli HQ. Promote the use of statistical analysis and big data management, in cooperation with Marelli HQ, to validate strategies performance and diagnosis robustness. Increase the technical skills of the resources and promote their professional growth. Customer technical reference for all the issues related to calibration. Support on Customer site for calibration activities development, when requested. Confirm with the Car Maker for the process of calibration via label review. Coordinate the activities on the test development vehicles assigned to each project. Take part to calibration design review - risk analyses with Marelli HQ Team or with the Customers. Analysis and resolution of vehicle fleets and vehicle market concerns Qualifications: Bachelor's Degree in Mechanical or Electronic Engineering (or equivalent). Minimum 2-10 years of experience as an Application Engineer with a focus on base engine calibration at the engine test bench. Calbration Experience in Gasoline / CNG / Bi-Fuel Engines Proven experience in emissions, drivability, and OBD diagnosis. Prior experience as an Application Project Leader and Calibration Dataset Manager is highly preferred. In-depth knowledge of engine control systems. Strong understanding of OBD2 System Calibration and Regulations. Proficiency in MS Office Suite and ETAS Inca. Experience with Matlab and Python programming languages is a plus. Excellent problem-solving and analytical abilities. Ability to work independently and as part of a team. Strong organizational and time-management skills. A proactive and results-oriented approach. Should be ready to travel when needed.

Role & responsibilities • Define and update the Application project plan for the assigned Projects. • Manage with pro-active approach the project plan changes during the development phase. • Adopt calibration methodologies, procedures and tools shared by Marelli HQ. • Promote effective solutions together with team Application and Functions Design Teams • Guarantee the compliance of calibration process workflow with the standards defined by Team. • Promote the use of statistical analysis and big data management, in cooperation with team, to validate strategies performance and diagnosis robustness. • Customer technical reference for all the issues related to calibration. • Support on Customer site for calibration activities development, when requested. • Confirm with the Car Maker for the process of calibration via label review. Coordinate the activities on the test development vehicles assigned to each project. • Take part to calibration design review - risk analyses with Team or with the Customers. • Analysis and resolution of vehicle fleets and vehicle market concerns Preferred candidate profile Skill Gasoline/CNG/Flex fuel working experience. MPFI/GDI engines. Base calibration on test bed and vehicle. Transient calibration. Drivability and test trips experience. Start ability calibration. Idle calibration. Emission calibration. OBD-1 and OBD-2B calibration.