185 Iec Jobs - Page 3

Design, implement & maintain PLC, SCADA, HMI, VFDs. Manage automation projects end-to-end. Lead maintenance & troubleshooting teams. Ensure compliance with safety standards. Coordinate with vendors & teams. Optimize processes & maintain documentation

Job Requirements We are seeking a highly experienced Senior Cybersecurity Engineer with over 10 years of expertise in cybersecurity, specifically focused on securing control systems (e.g., SCADA, DCS, PLC, ICS). This role involves developing and implementing cybersecurity measures for industrial control systems (ICS) across multiple sectors, such as energy, utilities, oil and gas, and manufacturing. The ideal candidate will be skilled in identifying, mitigating, and preventing security risks and vulnerabilities within these critical systems 1. Risk Assessment and Management 2. Design and Implementation of Security Controls 3. Incident Response and Threat Management 4. Compliance and Policy Development 5. Training and Awareness • Provide cybersecurity awareness training for operators, engineers, and other relevant personnel. • Foster a cybersecurity culture within teams working with control systems 6. Collaboration and Stakeholder Engagement • Collaborate with cross-functional teams to embed security throughout the lifecycle of control systems. • Act as a cybersecurity expert, providing guidance and consultation to project teams Work Experience Bachelor’s or Master’s degree in Cybersecurity, Information Security, Engineering, or related field 10+ years of experience in Industrial Automation with 5+ years of experience in cybersecurity with a focus on industrial control systems (ICS) and SCADA. Extensive knowledge of control systems protocols (e.g., Modbus, OPC, DNP3) and security standards (NIST SP 800-82, IEC 62443). Proven experience in risk management, vulnerability assessment, and security control design. Familiarity with incident response, threat intelligence, and SIEM tools as they pertain to ICS environments Strong problem-solving skills, attention to detail, and the ability to work in a high-stakes environment Knowledge on ABB 800xA system is an added advantage Preferred Certifications: • CISSP (Certified Information Systems Security Professional) • GICSP (Global Industrial Cyber Security Professional) • CISM (Certified Information Security Manager) • IEC 62443 certifications or relevant ICS cybersecurity credentials

You will be responsible for preparation of detail design, standard technical specifications, request for quotation (RFQ) documents, erection & maintenance manual for Medium Gas Turbine Mechanical systems like Fire Fighting & suppression system, Gas detection system, Acoustic Package, Air Intake system, Enclosures, Ventilation system for the selected Gas Turbine package. The job includes working on fault reports related to the component or package and improvement of standards. The position will be based in Gurgaon, India, in the global challenging technical environment in the Global Customer Operations, Mechanical Systems department. One has to closely coordinate with the Mechanical Systems department in Finspang, Sweden. Majority of the tasks will be in Research & Development but may extend to Customer Projects and site support. oriented: Member of Fire and Gas Package Coordination team. Responsible for arranging regular meetings within all internal interface partners, Customer Order engineering and Suppliers. Participating in reviews and gates. Responsible for Design and preparation of PIDs, various lists like part list, electrical load list, settings list, fault procedure list, spare parts list, RFQ documents of Fire extinguishing system CO2 & H2O and Gas detection system. Understanding of Fire Fighting & Suppression system (detection, extinguishing) Responsible for design and preparation of specifications for Air Intake system, Silencer, Enclosure, Anti Icing system, Exhaust system, ventilation Involved in most of the Fault reports in the technical area assigned. Decide the system strategy. Take an active part in creating and sustaining the road map for the system. Be active in benchmarking knowledge internal / external Siemens. Shall aim to be the one with best knowledge for the systems function and detailed design Checking the vendor bids and providing Clarifications, technical vender negotiations. Vendor evaluation including risk assessment and support the commercial selection. Checking of vendor design and documentation. Supporting the detailed design by vendors. Support purchasing to find best total cost solutions. Generating and finalizing cost savings ideas. Document and drive implementation in PLM2020, SAP. Release and maintain reference documentation in COMOS, PLM2020, Team Centre or related databases Provide field/site support if required, Support during warranty/Service Support after warranty. We dont need superheroes, just super minds: Bachelor / masters in mechanical engineering. 3 to 10 years of relevant engineering work experience Knowledge of relevant international codes & Standards including NFPA, IEC, API, ISO, Hazardous area requirements, etc. Knowledge of performing risk analysis and hazop studies. Ability to travel globally High flexibility in taking new tasks/responsibilities Excellent communication skills, excellent English language skills, Knowledge of mechanical design of Gas Turbine enclosures Strong understanding of engineering fundamentals. Excellent problem-solving and analytical skills. Creativity and innovation in developing new ideas and solutions. Ability to work effectively in a team environment. Attention to detail and precision in documenting results. Ability to prepare and present the proposed solutions and business cases for product improvement and development. Commitment to continuous learning and staying current with industry advancements.

Job ID/Reference Code INFSYS-NAUKRI-210982 Work Experience 5-8 Job Title Medical Device - Mechanical Engineer Responsibilities A day in the life of an Infoscion As part of the Infosys delivery team, your primary role would be to interface with the client for quality assurance, issue resolution and ensuring high customer satisfaction. You will understand requirements, create and review designs, validate the architecture and ensure high levels of service offerings to clients in the technology domain. You will participate in project estimation, provide inputs for solution delivery, conduct technical risk planning, perform code reviews and unit test plan reviews. You will lead and guide your teams towards developing optimized high quality code deliverables, continual knowledge management and adherence to the organizational guidelines and processes. You would be a key contributor to building efficient programs/ systems and if you think you fit right in to help our clients navigate their next in their digital transformation journey, this is the place for you!If you think you fit right in to help our clients navigate their next in their digital transformation journey, this is the place for you! Technical and Professional Requirements: Primary Skills: CTQ, QMS, ISO 13485, Design Documentation, CAPA, DHF Preferred Skills: Technology->CAD->CAD - Others Educational Requirements Master Of Engineering,Master Of Technology,Bachelor Of Engineering,Bachelor Of Technology Service Line Engineering Services * Location of posting is subject to business requirements

System Engineer will be responsible for Design of Control, Protection and Substation Automation Systems used across various voltage levels in India and Abroad for a variety of customers that include Central/State/Private Utilities, Industries and Infrastructure power systems. The incumbent will be responsible for the project design lifecycle that include the various project phases like Understanding the client requirement, Preparation of detail design/documentation/calculations, Approval of design/documentations from customer, ordering the required material to the factory and support to Project Management/Factory/Commissioning team for successful execution of the Project. Job Description Design engineering of Control, Protection & Automation systems / panels. Preparation of Basic / Detailed design documentation - Control and protection layout, bill of material and schematic preparations, configuration architecture and required documentations as outlined in the project scope. Design documentation is facilitated by employing use of existing CAD based systems. Preparation of Protection SLDs, Trip matrix, interlocking logics etc. as per customer specification/requirements. Design of Control & Protection Panels for all voltage levels system, should have knowledge of various bus arrangements. Control and protection schematic preparation for various power system equipment i.e. Generator, Line, Transformer, Reactor, Busbar etc. Preparation of FAT/SAT/GTP/TTR/FDS/HEAT LOAD/IO list/Data volume-signal list etc. documents. Preparation of System interfacing drawings. Preparation of various types of System Architecture based on system requirements. Knowledge on different serial and ethernet based protocol used in Substation Automation System. Should have knowledge on Master-Slave and client-server philosophy, IEC61850 protocol and Computer networking. Discussion with customer for drawing approval/resolution of query. Initiating loadings to factory for material procurement, fabrication and wiring of the systems under scope. Support to Sales/testing/commissioning team as and when required Eligibility criteria / Skill Sets B. Tech / B.E in Electrical/Electronic Engineering/Equivalent 5 - 10 years of relevant experience. (2-5 years of relevant experience can be considered as well) Should possess excellent interpersonal and communication skills (both verbal and written. Should be an Agile learner and should be able to work either independently or as a team player. Critical thinking, Quality consciousness, reasoning and problem solving are an essential part of this position. Should exhibit flexibility and adaptability Shall have good knowledge of basic computer applications specially Excel, Word, Power point etc. E Base software knowledge will be added advantage We at Smart Infrastructure Division in Siemens Ltd. is one of the top tier global suppliers of products, systems, solutions, and services for the efficient, reliable, and intelligent transmission and distribution of electrical power. As the trusted partner for the development and extension of an efficient and reliable power infrastructure that industry and the portfolio they need. Should be able to handle Electronics components (both active & passive), connectors, mechanical assemblies, packaging commodity independently. Identify and manage procurement risks, opportunities, potential changes, and claims during the entire lifecycle of a product. Ensure resilience supply chain and further develop supply base. Develop and implement sustainable strategic procurement activities. Should be able to use & communicate with global procurement network of category manager / purchasing council. Ensure an industry leading sourcing process, incl. control of the spend and ensuring purchase-to-pay compliance. Drive continuous improvement & digitalization. Develop, manage and engage preferred suppliers to drive supplier innovation and performance. Manage demand from internal customers. To increase CNI (Contribution to Net Income) through Negotiations PPC & other strategic levers Responsible for Negotiations - Driving cost reduction, Price & contract negotiation What you bring to the table: 5+ yrs. experience as a procurement professional BE in Electronics/ BE in Electronics & Telecommunication Mandatory Profound knowledge of SCM and preferably electronics business Excellent ability to communicate and collaborate with various stakeholders across the business. Ability to build trust and confidence quickly and professionally. Adhere to our core values of being humble, hardworking, having the ability to execute getting things done, being smart with regards to people, processes & problem solving Good knowledge of electronic auctions and bids (e-auctions/ e-bids) Knowledge of various Siemens tools like SCM Star, CORA, PUMA, SCM Core, Nexus QES SAP. Interest in digital & automating solutions

We at Smart Infrastructure Division in Siemens Ltd. is one of the top tier global suppliers of products, systems, solutions, and services for the efficient, reliable, and intelligent transmission and distribution of electrical power. As the trusted partner for the development and extension of an efficient and reliable power infrastructure that industry and the portfolio they need. Job overview This position is for system engineer with experience on engineering of protection system and substation Automation system. Job Description Preparation of Protection SLDs, Trip matrix, interlocking logics etc. as per customer specification/requirements. Design of Control & Protection Panels for all voltage levels system, should have knowledge of various bus arrangements. Control and protection schematic preparation for various power system equipment i.e. Generator, Line, Transformer, Reactor, Busbar etc. Solid understanding of substation Automation System and SCADA applications, Communication protocols and integration of IEDs from different Vendors like Siemens, GE, ALSTOM Preparation of FAT/SAT/GTP/TTR/FDS/HEAT LOAD documents. Preparation of CRP interfacing drawings. Preparation of various types of System Architecture based on system requirements. Knowledge on different serial and ethernet based protocol used in Substation Automation System. Should have knowledge on Master Slave and client server philosophy, IEC61850 protocol and Computer networking. Should have knowledge of networking topologies (Ring, HSR, PRP etc.) Discussion with customer for drawing approval/resolution of query. Initiating loadings to factory for material procurement, fabrication and wiring of the systems under scope. Support to Sales/testing/commissioning team. Preparation and validation of BOM, GA and schematics. Eligibility criteria / Skill Sets B.Tech /B.E in Electrical/Electronics Engineering. 6-8 years of relevant experience. Has good interpersonal, negotiation and communication skill. Fast learner and able to work independently or as a team player. Able to work under minimum or less supervision. Shall have good knowledge of computers, especially Excel, Word, Power point etc. E Base software knowledge will be added advantage.

Job Requirements Job title: Electrical Architect (Hardware Architect) You will work within a multi-disciplinary team on applying research results and technology advancements to improve and release new advancements in the healthcare industry. In this role of Electrical Architect , you are responsible for the development and maintenance of Hardware Subsystems/Components and will gain substantial knowledge of complex systems in medical imaging & Mechatronics environment. Together with a multidisciplinary team of engineers, you play a crucial role in getting these systems/sub-systems to the required performance, by developing the designs related to electrical, electronics, digital, controls etc. and looking for the best solutions within those boundaries. This requires broad orientation, conceptual skills and a “can do” mentality, keeping abreast with all trends and advancements in technology and medical imaging. Your role: Requirements, design, implementation, test and integration of module/sub-system in accordance with the higher-level architectural requirements and design specifications Ensuring that the design is consistent with the higher-level architecture and requirements Ensuring that the proposed design would have the safety, reliability and quality features built-in Responsible for ensuring that the design meets the performance, quality and cost criteria Key contributor in building robust technical proposals for system/ sub system level development/ life cycle management programs. Conduct concept and feasibility studies. Leads the introduction of new technologies Ensuring that there is proper documentation per standards for the developed design Ensuring the mutual consistency and efficient integration of the separate components in modular design that meets the product specification Ensuring that his design modules meet the product certification requirements Drawing up personal schedule and reports on progress Defining and assessing the Work Breakdown Structure/planning/costs of his/her area Being abreast of technical developments in own field through study of literature and technical contacts Mentoring/guiding/hand-holding young engineers in the team and helping them ramp-up well Maintaining product and company reputation by complying with country specific regulations Supplier evaluation and communication Work Experience You're the right fit if: Completed engineering studies at University level; BE/BTech/ME/M-Tech in Electronics or Electrical Engineering, with 12+ years of experience Knowledge of state-of-the-art methods/tools (CAD/simulation) used in electrical design Experience in Analog, Mixed Signal Board Design and Power Electronics designs Experience in 16/32-bit microcontroller-based design and interfacing Knowledge of cable harness design Knowledge of communication interfaces like RS232, RS485, CAN, EtherCAT, Ethernet and USB Knowledge of EMI/EMC standards and testing for conformance Good hands-on experience in schematics and PCB design tools (e.g. Cadence / mentor Graphics) Knowledge of mechanical design compatibility aspects Knowledge of IEC 60601 standards will be an added advantage Knowledge of Embedded Software Programming will be an added advantage Ability to understand and debug problems across hardware/software boundaries Knowledge of Global Medical Quality and Regulatory Standards e.g. IEC, FDA, UL, CE, CSA etc. Hands-on experience with tools like Agile, Windchill or equivalent Disciplined team worker, ability to work independently Able to guide and mentor young engineers in the team Result oriented team player Ability to present and articulate ideas to key stakeholders and leadership team Excellent communication skills and Positive ‘can do’ attitude Quality mindset in design and documentation Global and Cross-functional Experience/Skills in a Matrix Organization will be an added advantage New Product Introduction (NPI) and Product Life Cycle Management Product Obsolescence Management/Sustenance and Value Engineering

Role & responsibilities Power Module Design: Design high-voltage, high-current power modules, including IGBT, SiC and GaN-based solutions. Simulation & Analysis: Conduct electrical, thermal, and mechanical simulations to optimize module performance. Schematic & PCB Design: Develop schematics and layouts for power electronics circuits using industry-standard tools. Material Selection & Packaging: Evaluate materials and packaging technologies for thermal and electrical efficiency. Prototyping & Testing: Work with manufacturing teams to develop prototypes, perform validation tests, and troubleshoot designs. Compliance & Standards: Ensure designs meet industry safety and reliability standards (IEC, MIL, IS, etc.). Collaboration: Work closely with cross-functional teams, including mechanical, thermal, and manufacturing engineers. Preferred candidate profile Education: Masters or PhD in Electrical/Electronics/Power Electronics or related field. Technical Knowledge: Understanding of power semiconductor devices (IGBT, MOSFET, SiC, GaN), high-voltage insulation, and thermal management. Software Proficiency: Experience with simulation tools like PSIM, LTSpice, Ansys, COMSOL, or similar. Hands-on Skills: Exposure to PCB design tools like Altium, KiCad, or Eagle is a plus. Experience Level: Freshers with strong fundamentals or experienced professionals with a track record in power module design. Problem-Solving: Strong analytical and troubleshooting skills. Communication: Ability to document and present designs effectively.

Garrett Advancing Motion is looking for Software Functional Safety Engineer to join our dynamic team and embark on a rewarding career journey. We are seeking a dedicated and detail-oriented Safety Engineer to join our team As a Safety Engineer, you will be responsible for identifying and mitigating potential safety hazards in the workplace and ensuring compliance with safety regulations and standards You will work collaboratively with cross-functional teams to develop and implement safety policies, procedures, and training programs to promote a safe and healthy work environment Responsibilities:Conduct thorough risk assessments and safety audits to identify potential hazards in the workplace Develop and implement safety policies, procedures, and guidelines to ensure compliance with local, state, and federal regulations Collaborate with cross-functional teams to assess and mitigate risks associated with new processes, equipment, or facility modifications Provide safety expertise and guidance to project teams during the design and implementation of new projects or processes Develop and deliver safety training programs to educate employees on safety protocols, emergency response procedures, and best practices Investigate incidents and accidents, analyze root causes, and develop corrective action plans to prevent reoccurrence Maintain accurate safety records, including incident reports, inspection findings, and safety-related documentation Stay updated with industry trends, emerging safety technologies, and regulatory changes, ensuring compliance with the latest standards Conduct regular safety inspections and audits to ensure ongoing compliance and identify areas for improvement Collaborate with vendors and suppliers to evaluate and select safety equipment and personal protective gear Foster a culture of safety awareness by promoting proactive safety practices and encouraging employee engagement in safety initiatives

Leverage stakeholders to drive waste management, behavior change, engage communities, support waste workers, and implement 3R initiatives for cleaner cities.

Job Title Software Technologist Job Description Analyses, designs, tests, codes, secures, debugs, modifies, deploys, integrates and maintains (system) software enhancements, test environment and/or new software. Uses state-of-the-art technologies and practices. Interacts with users / product owners to define / adjust requirements and/or necessary modifications. Keeps abreast of technical developments and practices in own field through literature, courses/trainings, technical contacts, and competitive environment. Applies agile software development methods as a member of agile teams. To succeed in this role, you should have the following skills and experience. BE/BTech/MCA/MTech with 4-9 Years of exp in Embedded Systems As a Senior Engineer with expertise in Embedded Systems, you will play a crucial role in designing, developing, and maintaining Device software. This role is focused on hands-on work, but it also requires the ability to direct others and architect solutions. Software design and development in embedded applications using C/C++ is required; C# and Python is preferred. Experience in RTOS. Experience in ARM architecture, ARM microcontrollers. Working knowledge in usb, ethernet, I2C,SPI, UART, Timers, etc. Experience in software development in medical industry or highly regulated industry. Experience with IEC 62304, FDA guidance for medical device development and other relevant medical device regulatory standards is highly preferred Experience in Agile SW Development practices. Experience in scaled agile framework (SAFe) is preferred Demonstrated experience working with real time operating systems. ThreadX is required, FreeRTOS is preferred Knowledge and application of the following standards and interfaces is preferred As a Senior Engineer with expertise in Embedded Systems, you will play a crucial role in designing, developing, and maintaining Device software. This role is focused on hands-on work, but it also requires the ability to direct others and architect solutions. Skill expectations: Software design and development in embedded applications using C/C++ is required. Experience in RTOS. Experience in ARM architecture, ARM microcontrollers. Working knowledge in usb, ethernet, I2C, SPI, UART, Timers, etc. Experience in software development in medical industry or highly regulated industry. Experience with IEC 62304, FDA guidance for medical device development and other relevant medical device regulatory standards is highly preferred Experience in Agile SW Development practices. Experience in scaled agile framework (SAFe) is preferred Demonstrated experience working with real time operating systems.

Job Overview TE Connectivitys R&D/Product Development Engineering Teams conceive original ideas for new products, introduce them into practice. They are responsible for product development, and qualification from market definition through production and release; assist in the qualification of suppliers for new products to ensure suppliers deliver quality parts, materials, and services for new or improved manufacturing processes; conduct feasibility studies, testing on new and modified designs; direct and support detailed design, testing, prototype fabrication and manufacturing ramp. The R&D/Product Development Engineering Teams provide all required product documentation including, but not limited to, Solid Model, 2D/3D production drawings, product specifications, and testing requirements. They create and modify detailed drawings and drafting or conceptual models from layouts, rough sketches or notes and contribute to design modifications to facilitate manufacturing operation or quality of product. Typical fields of expertise include: materials, mechanics and systems, electrical, optics, chemistry, software, automation systems, packaging, testing and measurement, and manufacturing of electrical, mechanical and electronic components, products, and their integration into systems. Responsibilities The Test Engineer will review assigned test requests and recommend testing strategies to ensure TE products meet customer performance and reliability needs while maximizing laboratory resource efficiencies. Understand test request and establish work requirements including instrumentation, test sequence, test programming and fixture requirements as needed. Perform electrical and mechanical testing on TE products per test procedures. Write detailed test procedures and test reports as needed to support the test lab and its customers in performing testing. Recommend testing protocols to address specific customer needs Collaborate with other lab engineers on interdisciplinary teams to plan and conduct complex test programs. Collaborate with other lab engineers on interdisciplinary teams to design and prepare test systems for unusual tests. Assist in identification of new or replacement test equipment for purchase. Review active test programs and final test results to ensure that performance and reliability requirements are met. Maintain the integrity of test results by complying with corporate, business unit and local quality system requirements. May oversee the work of test technicians. Coordinates and follows up on testing performed by test technicians. Ensure all safety requirements are met. Ensure good engineering practices are followed. Perform estimates of labor and materials required for testing, including project test scheduling. Must be capable of multitasking and taking full ownership of assigned projects. Participate employee continuous improvement teams as needed. Perform other duties as assigned by management. This position requires access to information which is subject to stringent controls. Skill Set and Profile Hands-on demonstrated experience in performing electrical tests, Complex tests set-ups, fixtures ,basic machine programming. Hands-on experience to document and deploying quality management systems i.e. AS9100D etc. Hands-on experience for tearing apart assemblies / sub-assemblies of electromechanical parts Capable of Handling Multiple Projects simultaneously. Good Conceptual, problem solving and Analytical Skills. Should be Self-Motivated, Adaptive, Passionate about results and a Good Team Player Strong Interpersonal & stake holder management skill Strong Technical Aptitude with Willingness to explore & learn new Technologies for test instrumentation. Demonstrated Experience of working in a fast paced and changing environment with tight deadlines Knowledge of six sigma tools will be an added advantage. Knowledge of Global Certifications and Regulatory Standards (UL, IEC, MIL etc.) is an advantage Willingness to Travel for project requirements as required Qualification and Experience B.E./B.Tech. in Electrical / Electronics / Instrumentation Engineering 5+ years of hands experience in Test Instrumentation in test labs. Aerospace Lab experience is an added advantage. Experience with Product Testing in line to MIL specifications is desired. Competencies Values: Integrity, Accountability, Inclusion, Innovation, Teamwork

Hi, We are looking for the candidate to join our Safety Testing Team. Work Experience Minimum 5 years of relevant experience ( CBTL experience will be preferred) Job Description Work Responsibilities: Conduct the testing for ITAV (Must) and HOUS products as per IEC 60950/60065/62368, IEC 60335 series etc. Examine test samples and read blueprints, electrical schematics, wiring diagrams, and operational instructions. Products Evaluation, test performance and review test and construction data based on customer document about the products. Operate designated machines and special laboratory equipment. Perform routine maintenance of designated test equipment and laboratory area. Evaluate customer requirements and determine approach for testing and certification. Responsible for the timely completion of projects. Preparation of test plan, evaluate test results and prepare test report. Maintain quality records as per ISO 17025 requirements. Implementation and sustaining of process and procedures as related to the test lab activities as per ISO 17025 requirements. Review product requirements, specifications and determine appropriate safety standards. Determines lab equipment requirements, work with external vendor's and internal purchasing teams to procure and install and calibration. Develop new testing facilities and prepare their scopes. Interested candidate can share updated resume to nikita.singh@nemko.com or apply on naukri.com

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation, operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Serves as lead engineer on mid- to large size projects. Provides specialized technical input to studies and design for staff's specific area of expertise. Approves and signs off on work. Provides technical expertise for studies and design efforts. Presents complex technical solutions to clients. Performs quality control reviews of work developed by others. Participates in development of technical proposals. Provides estimates for the engineering budget and schedule to meet requirements on large projects. Qualifications Master of Engineering degree in Power Systems Energy Systems or equivalent education from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., IET UK) Overall 13+ years of work experience in consulting or design organization is preferable. Prior experience in performing Grid Connection related (PSSE PSCAD ETAP Equivalent) dynamic or advanced power system studies is preferred. Experience in preparation of technical study reports for Renewable Energy Grid Connection works (Wind Farm Solar PV Hybrid BESS Other Equivalent) is required. Experience in building and leading technical experts of a specialist study team is desirable. Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is recommended. Working with OEMs of Wind Turbines, Solar PV modules for modelling of internal control loop systems is desirable. Very good communication skills (Oral and Written) in English language is mandatory.

Role & responsibilities Job Title: Electrical Design Manager (Solar) Job Location: Kompally - Hyderabad Job type: Permanent Preferred candidate profile: 1. Masters / Bachelors degree in engineering / technology (Electrical) 2. Should have minimum 8+ experience in design of Electrical and solar projects 3. At least 2+ years of experience working in similar role. Skill Set Requirements: 1. Candidate shall be preferably from Consultancy / EPC background with exposure to utilityscale solar PV projects. 2. The candidate shall be preferred to have Exposure to the on-site DC components erections works and commissioning of the DC side of the Solar plant. 3. Knowledge in DC/AC/HV side Engineering Specification and Standards (IEC, IEEE, ANSI, SEC, IS etc) 4. Knowledge of PV Syst, Sketchup, AutoCAD, MS office is essential, ETAP, Dialux, CYMCAP, WINIGS, SKM tools will be advantageous. Job description 1. Design of DC side electrical engineering related Medium and large-scale Solar Photovoltaic Power plants. Ability to provide cost-optimized design of the arrangement of the PV plant layout. 2. Shall be Familiar with Energy yield simulation in PV Syst. 3. Shall be able to select the Solar PV Modules types and ratings, PV module installation type. Optimum DC rating of Plant. 4. Shall be able to perform shading analysis using software tools (Sketchup, etc) 5. Preparation of DC, AC, Aux SLD (Single Line Diagrams) & the layout design for the 3D CAD tools. 6. Preparation of Plant Layout GA drawings, PV Array Layout, DC Cable routine layouts, DC Grouping layout and all other Solar PV plant services layout 7. PV plant Earthing Calculation as per IEEE, BS, IS and other related standards: Earthing conductor sizing and earth mat design. 8. Lightning risk assessment and lightning calculations for design for Solar PV plant as per IEC and IEEE guidelines. 9. String Cable, Power Cable (DC and AC) sizing & calculation; Control & Communication Cable sizing, length Calculations and cable accessories selections. 10. Able to understand and Validate Solar PV inverter. HT Panel & IDT component Power / Control schematics, BOQ and Site accessories. 11. Sizing Calculations for the protection Fuse, Connectors, SCB, SPD all DC components and Ability to select the DC Fuse, SCB, String / Central Inverters or PCS and all associated equipment for solar PV plant as per IEC, IS, IEEE standards. 12. Review & preparation of General Technical Parameters, Design Memorandum, checklist preparation, Equipment sizing and configuration for the DC Component. 13. Auxiliary Load calculation AC & DC and designing schematic diagram of auxiliary loads. 14. Able to do pre-dispatch inspection and perform the pre-commissioning test for all solar plant equipment independently. Coordination and support for testing and commission of Inverter. 15. Preparation of SCADA Architecture DI, DO and AI List. HV Side: 1. Design and detailed engineering of Switchyard Single Line Diagrams and SLDs for ACDB and DCDB. 2. Design and review of Switchyard Layouts: plan, sectional, Clearance Check Diagram, Earthing, Erection Key Diagram, DSLP, cable trench and Illumination. 3. Substation Calculation: Short circuit force, DSLP, Earthing mat, CT/VT Sizing, Battery sizing, Cable tray-loading etc 4. Component Data Sheets / General Arrangement Reviews: Switchyard equipment, Power transformers, C&R panels, Cables and SCADA systems. 5. General Technical Parameters, Design Memorandum and Customer Technical Specifications preparation. 6. Detailed engineering (Primary Engineering) from the Customer technical specifications. 7. Power Cable (HV and LV) sizing and calculation. 8. Control Panel & Relay panel schematics preparation and review. 9. Substation interlocking logic diagram preparation. 10. Preparation of checklist and technical Specification of individual components. 11. Design and review of the transmission line design, routing and calculations. Interested candidate please apply here and also share the profile to chidananda@manpower.co.in; Best Regards, HR Manpower Group Preferred candidate profile Perks and benefits

In-depth cable designing knowledge of Low Voltage Communication Cables, Fire Survival Cables, Shielded Cables, Instrumentation Cables, data cable,Marine Cables, Military/Defense Cables, UL Certified Cables & Special Cables as industry standards

About the Role: We are seeking a highly skilled Embedded Engineer with expertise in embedded systems development and strong debugging skills . The ideal candidate will have experience in embedded systems development, with a strong preference for those who have worked on medical devices and have knowledge of IEC 62304 standards. Key Responsibilities: Design, develop, and optimize low-power embedded systems for battery-operated devices. Develop firmware and drivers for microcontrollers and embedded systems. Conduct code reviews, debugging, and performance tuning to ensure reliability and efficiency. Work with RTOS and real-time embedded programming. Knowledge of hardware requirements. Ensure compliance with IEC 62304 and other regulatory standards for medical devices. Develop and execute unit tests, integration tests, and system validation . Collaborate with cross-functional teams, including software, hardware, and QA . Required Qualifications: Bachelors or Masters degree in Electronics, Computer Engineering, or related field. 5+ years of experience in embedded systems development. Minimum 5 years of experience in programming languages Embedded C, C++ . Strong experience with I2C, UART, SPI, USB, ADC, DAC, and Sensors . Hands-on experience with embedded debugging tools (JTAG, oscilloscopes, logic analyzers). Experience with ARM Cortex-M series or similar microcontrollers . Understanding of RTOS (e.g., FreeRTOS, Zephyr) . Experience with communication protocols (UART, SPI, I2C, CAN, etc.) . Experience with Code Composer Studio . Proficiency in Code Quality tools like Coverity, Fortify, and Unit test tools . Ability to troubleshoot and debug hardware and firmware issues . Strong documentation skills and familiarity with IEC 62304 (preferred for medical device development). Preferred Qualifications: Experience working on medical devices and familiarity with regulatory requirements. Knowledge of security and encryption techniques . Familiarity with Python or scripting languages for test automation. Why Join Us? Opportunity to work on cutting-edge healthcare technology . Collaborative and innovation-driven environment. Competitive salary and growth opportunities . If you are passionate about embedded systems and want to drive real-world impact in healthcare , we would love to hear from you!

Role & responsibilities Required: Knowledge on different ICS device of field such as PLC, HMI, DCS, SCADA. (Mandatory) Experience of working with different EWS such as studio 5000, TIA portal etc. (Mandatory) Experience in working with VB script or LUA language. (Mandatory) Strong knowledge of different industrial protocol such as ENIP, Profinet, Modbus TCP/IP, MMS, SRTP etc. (added advantage) Familiar with network monitoring tool such as Wireshark (added advantage) Detailed knowledge of IT/OT networking system. Field experience in ICS/OT systems. Basic knowledge of networking and ethernet communication. Knowledge of different level for OSI model of communication. Familiar with different MS office tools for prepare research analysis. Excellent communication skills for written and verbal. Addition: Having Knowledge of IEC & NIST Standards. Knowledge of Cybersecurity fundamentals. OT security certifications. EXPERTISE AND QUALIFICATIONS Required: • Knowledge on different ICS device of field such as PLC, HMI, DCS, SCADA. (Mandatory) • Experience of working with different EWS such as studio 5000, TIA portal etc. (Mandatory) • Experience in working with VB script or LUA language. (Mandatory) • Strong knowledge of different industrial protocol such as ENIP, Profinet, Modbus TCP/IP, MMS, SRTP etc. (added advantage) • Familiar with network monitoring tool such as Wireshark (added advantage) • Detailed knowledge of IT/OT networking system. • Field experience in ICS/OT systems. • Basic knowledge of networking and ethernet communication. • Knowledge of different level for OSI model of communication. • Familiar with different MS office tools for prepare research analysis. • Excellent communication skills for written and verbal. Addition: • Having Knowledge of IEC & NIST Standards. • Knowledge of Cybersecurity fundamentals. • OT security certifications

1.experience in an electrical design department within the crane industry. 2.Proficiency in Eplan Electric and AutoCAD Mechanical. 3.depth knowledge of industry standards and regulations, including the (NEC) and (IEC) standards. Required Candidate profile 4.Experience in designing electrical systems for various applications, Crane electrical control panels, Specific duty crane, including power distribution, PLC control panels.

Hands on experience of Pythons, Json and port programming skills. Server & client servers programming skills for live data streaming & data ingestion. experience on IoT devices, controllers like edge devices, cloud connectors & MQTT brokers.

1.Hands on experience on Oil and Gas projects, selection of Electrical and Instrumentations components Design , inspection & installation. 2.Preparing P&ID, SLD & control Wiring diagram. 3. Item code creation in ERP & preparation of BOM. Required Candidate profile 4.Attending project kick-off meetings & finalizing E&I requirements. 5.Sharing E&I budget to marketing team with back-up offers & price list. 6.Preparing budgetary specifications for Bought-Out items.

Design Engineer (Fire & GAS) Name:Design Engineer (Fire & GAS)Role:Design engineerIndustry:Telecom, WirelessLocation:Pune (Maharashtra)Job Type:Full TimeExperience:1 - 4 yearsSkills:Fire/ Gas detection & VESDA Design, Solution Architecture, FDS, DDSSalary:Best in the industryEducation:B.E./B. Tech – Electronics & Telecommunication/Electrical/ Instrumentation Engineer Description: Proficiency in fire and gas system design software (e.g., AutoCAD, FDS, or similar).Strong understanding of fire and gas detection technologies, including conventional and addressable systems, smoke detectors, heat detectors, gas detectors, and fire suppression systems. In-depth knowledge of relevant codes and standards such as NFPA 72, 101, 13, 15, IEC, UL, and local fire safety regulations. Ability to conduct risk assessments and recommend safety improvements. Strong analytical and problem-solving skills. Excellent communication skills, both verbal and written. Ability to work effectively in cross-functional teams and coordinate with stakeholders at various levels. Fire/ Gas detection & VESDA Design and Engineering Knowledge.Knowledge on Industrial standard protocols.Should be able to support for Prebid, Design and Engineering activities.Able to prepare the following Engineering Deliverables.Read the RFP requirement and design the system.Engineering BOM.Technical Writeup.Solution Architecture.FDS, DDS.

Role: Accountant and Office Administration Location: Plot no 28, Adithya Nagar, High Tension Line Road, beside Prasad Hospital, Kukatpally, Hyderabad, 500072 Salary: 1.75 LPA - 2.5 LPA Role & Responsibilities: Manage Company Registration, ROC Filings & Firm Registrations Handle GST, TDS, ITR Filing & Compliance Process Labour Licenses, Trade Licenses, Udyam Registration Oversee FSSAI, IEC, Trademark, and DSC applications Perform Bookkeeping, Payroll Processing & Outsourced Accounting Prepare Project Reports, CMA Data & Financial Documentation Ensure compliance with Indian tax laws & financial regulations Work on Tally, MS Office & accounting software Provide client support & financial advisory services Preferred Candidate Profile: Education: B.Com / M.Com / CA Inter / CMA Inter Experience: 1-2 years in taxation, compliance & accounting Skills Required: Proficiency in Tally & MS Office Strong knowledge of Indian tax laws & compliance Excellent communication & client handling skills Experience in filing returns & financial documentation Perks & Benefits: Salary: 1.75 LPA - 2.5 LPA (Based on Experience) Career Growth & Learning Opportunities Exposure to Diverse Accounting & Compliance Projects Friendly & Supportive Work Environment

1. Building applications using communication protocols IEC 60870 104, IEC 60870 101 2. IEC60870 protocol stack development expertise with TMW or similar third party IEC 60870 protocol stack 3. Packet analyzer tools like Wireshark , Simulators like Fryer, ASE,TMW, DTM

Role & responsibilities The candidate will incubate Automotive Cyber security Products/Services within Business Assurance Division in South Asia by providing know how to develop Products basis on various Accreditation schemes for Management systems, Training and Certification program and Advisory services as well current market trend and requirements Candidate should have formal qualification and having exposure for managing and leading for ISO 21434/ UN R155 guidelines and other related standards Experience with ISO/SAE 21434:2021, ISO 24089:2023 R155/R156 standards in automotive cybersecurity and software update. Assessment /Inspection as per ISO 17020 ISO/IEC 17065 and ISO/IEC 17021-1 Knowledge of other cybersecurity standards pertinent to automotive, SCADA or IOT cybersecurity is a plus. Experience with vehicle EE systems, vehicle bus systems, and/or embedded software/hardware vehicle development and or software update development. Proven experience in customer facing advisory services (project and delivery), and knowledge of product certification methodologies. Competency in cybersecurity domain (Risk Management, Asset Security, Network Security, Identity & Access Management etc.) and in other cybersecurity solution