178 Iatf Jobs - Page 7

Responsible to maintain brakdown&anylysis the root cause. responsible fir daily maintenance activity as per plamnned.coordinate internal &external maintenance resource.responsibile for audits(IATF, Internal & External) documentation daily check sheet

Role & responsibilities To monitoring the QA internal, External & interested party issue. To mitigate the QA risk of respective Internal, external & interested party issue. Monitoring and escalating the product safety issue to Top Management. To collect & monitor the customer score card, corrective action submission if not meet the target To verify the annual calibration plan of Monitoring and measuring instruments (Only Product relevant MMDs) To ensure the third-party lab certification and approve the Services providers based on IATF and customer requirement To Verify the MSA plan and approve the MSA study results To ensure the skill level of inspectors in each stage (Receiving, In-process, Visual, Final & supervisors) To periodical review and approve the department documents, records & formats To Insure the Engineering change note (ECN) acceptance, closer with cutoff date of old revision To review and approve the part with respective documents PFD, PFMEA, control plan To approve new suppliers, review supplier audit plan and supplier QMS plan with respective audit evidence To ensure the feasibility and customer review requirements of quality aspects in NPD To periodical review and approve of PFD, PFMEA, control plan & SOP To ensure the product identification and traceability of each process Responsible for approving alternate and temporary changes (4M and abnormality) Handling customer complaints and timely closure with corrective and preventive action. To review the layout inspection plan and report , take action if not meet the specification Monitoring and reporting cost of poor quality Monitoring and reducing customer end PPM To ensure the part quality in appropriate stage like.. Receiving inspection, in-process inspection, Final inspection Conducting in-house Process and Product audit and closing the corrective actions & preventive actions. Maintain customer scorecard & customer communication through customer portal. Coordinating customer audits and taking corrective actions for audit NCs. To monitor the suspect, rework & repair part To Monitor and ensure the department objective . To monitoring the new product development based internal, external & interested party issue. To mitigate the new product development risk of respective Internal, external & interested party issue. To ensure the skill level of NPD engineers and supervisors To review and take necessary action for NPD feasibility review To approve and review the APQP timing plan To approve the NPD suppliers and tool quotations To approve the tool concept and tool timing plan Take action against of target failures of NPD commitments To co-ordinate the PPAP audit and submit the action as per customer requirement To initiate and close the Initial production control (IPC) Release the part to regular production with respective documents To approve the Process change request and collect the approval from customer for respective process change Preferred candidate profile Experienced In Reputed Rubber Industries, knowledge in IATF, Core Tools Perks and benefits Will be discussed during interview.

Role & responsibilities QMS Engineer Preferred candidate profile Perks and benefits

Key Responsibilities: Plan, organize, and oversee daily production operations to meet targets. Ensure optimal resource utilization , including manpower, machinery, and materials. Monitor production KPIs such as cycle time, OEE (Overall Equipment Effectiveness), and defect rates. Implement Lean Manufacturing, Kaizen, 5S, and Six Sigma methodologies for continuous improvement. Ensure strict adherence to ISO/IATF 16949 quality standards and customer requirements. Troubleshoot production issues and drive root cause analysis (RCA) & corrective/preventive actions (CAPA) . Collaborate with quality, maintenance, and supply chain teams to ensure smooth operations. Drive cost reduction initiatives without compromising quality and efficiency. Ensure safety compliance and adherence to environmental & legal regulations . Lead and mentor the production team to enhance skills and performance.

Key Responsibilities: Oversee in-process quality control and ensure adherence to approved standards. Conduct process approvals and validate manufacturing operations. Perform root cause analysis (RCA) & corrective/preventive actions (CAPA) for quality issues. Utilize 7QC tools for data analysis and problem-solving. Develop and maintain PFMEA, control plans, and standard work procedures . Ensure accuracy in Measurement System Analysis (MSA) & Statistical Process Control (SPC) . Implement process improvements to reduce defects and enhance quality . Collaborate with cross-functional teams to drive quality initiatives. Monitor supplier quality and support audits as per ISO/IATF 16949 standards. Maintain detailed documentation and reporting for quality performance metrics.

Key Responsibilities: Conduct in-process & final inspections to ensure product quality. Implement and monitor quality control processes in manufacturing. Perform root cause analysis (RCA) & corrective actions (CAPA) for quality issues. Ensure compliance with ISO/TS 16949, IATF 16949, and other automotive quality standards . Coordinate with production and design teams to resolve quality concerns. Conduct supplier quality audits and implement improvements. Monitor and analyze PPAP, SPC, and FMEA documentation. Handle customer complaints and ensure effective problem-solving techniques . Work on continuous improvement & lean manufacturing practices to reduce defects.

Candidate Prefer Industrial Fabric ,Non Woven. Cord Lab, Raw materials and finished products Testing, Basic knowledge of IMS/IATF & SAP Will be preferred.Complete documentation to maintain NABL scope accreditation,Lead the audit and resolution of Required Candidate profile Organize NABL external audit and ensure Correct handling of external audits for timely closure & NC resolution.Maintain documentation and Lead the IATF-16949 & IMS (ISO 9K, 14K, 45K) audits .

Min 8 years of exp in Forging, Heat treatment & Electrplating quality Experience of Forging industry only considered Familiar with TQM principles, iso 9001,iso 14001,TS Able to handle OEMs Required Candidate profile Candidate must be B.tech with atleast 8 years experience of handling Quality Assurance Handling customer audits, Working on rejection & rewor. Candidate must have excellent communication skills.

Negotiate contracts and agreements with suppliers and vendors to ensure favourable terms and conditions Manage relationships with suppliers and vendors to ensure timely delivery of goods and services Experience in documentation as per IATF standard. Required Candidate profile Experience of sourcing / purchase / vendor development in Automotive industry Experience of documentation ( DFM/PFMEA/PPAP/APQP) Knowledge of SPC/MSA/7QC tools Experience of costing of machining parts

Required All tools Maintenance knowledge which is used in Press and fabrication, tool designing, costing, manpower handling, drawing & CMM report reading knowledge, online correction of dies, TPM, MS Office, IATF, EMS & OSHAS Audit Knowledge

* Maintaining quality manuals and procedures * Coordinating internal and supplier audits, as well as process audits * Reviewing and managing corrective actions related to audits

+ Strong Experience in forging, machining and Heat Treatment + Knowledge on IATF, PPAP, CAPA, Root Cause analysis, Continuous Improvements, Poke Yoke, Cost reduction, QMS and GD & T + Quality Control Line Inspector and Rejection Control Required Candidate profile + Customer complaint handling , Engineering changes & customer coordination + Single point of contact of supplier for post technical discussions and development activities

Develop the Management System strategy, Integrated Management System (IMS),internal and process audit of the IMS.audit nonconformity data,Quality Management System (IATF 16949, ISO45001, ISO 14001),Customer audit and third party audit,supplier audit.

Professional Experience: +15 years of experience in Automotive manufacturing industry in an international business environment Ideally, 5 years in a similar position, however, can also be a strong candidate from 2nd row. Technical understanding of manufacturing process, knowledge of products (ideally for pneumatic brake systems). Knowledge of quality management systems, systematic problem-solving techniques, preventive quality tools Expat-experience is preferred, however, not must for candidate having right skills. Task and Responsibility: Implement and manage a group-wide process-oriented quality and product safety management system, and cybersecurity requirements in Region India. Define and approve regional quality policies, strategies, and targets; establish and monitor standards, guidelines, and KPIs; report to the regional MD/CEO. Negotiate quality agreements and contracts with major regional customers, including warranty and goodwill terms. Establish and evaluate regional Quality, Product Safety, and Technical Compliance organizations, monitor effectiveness and report regionally. Conduct risk assessments, manage field/recall campaigns, and ensure compliance with product integrity guidelines. Nominate and evaluate regional and location-specific Quality Managers in alignment with regional MDs and Global Quality Management. Set and execute quality goals, implement objectives, and align activities with group goals, coordinating with the Global Quality Head and location MD. Consolidate quality and safety KPIs, conduct local Q-reviews, and implement improvement measures, reporting results to global management. Organize and deliver quality and safety training, promote quality awareness, and drive operational excellence. Implement APQP, control plans, and ensure product quality and safety; continuously update control plans and instructions in production. Oversee operational quality activities, including root cause analysis, testing equipment control, and maintaining a materials laboratory. Ensure incoming part quality through inspections and manage deviations. Implement the customer satisfaction process, handle claims, support product and customer service activities, and assist with audits and improvement programs. Maintain audit planning, execution, and optimization, ensuring support for customer audits. Professional Competency Industry Knowledge: Extensive understanding of the automotive industry, including VDA 6.3 & 6.5, IATF 16949, APQP, FMEA, and PPAP. Problem Solving & Improvement: Proficient in Six Sigma, Lean methodologies, and process improvements. Digital & Technical Skills: Capable of driving digitalization activities within the Quality department, based on a well-defined strategy, to enhance efficiency and performance. Leadership & Communication: Strong interpersonal, written, and oral communication skills; excellent in coaching, mentoring, teamwork, and influencing global teams. Global Collaboration: Adept at leading and collaborating with diverse, cross[1]functional teams across different global regions

Creation and implementation of Manual, policies, processes, and procedures to meet the standard requirements of IATF 16949 / ISO-14001/ OSHAS 18001. Control internal PPM, supplier PPM and number of internal and external complaints Required Candidate profile Root cause analysis and resolution defects. QMS/EMS internal auditor Co-ordinate and conduct Internal process and product audits of the Quality Management System (QMS)

Role & responsibilities : 1-LTR MGMT 2- Lab facility planning , testing procedure before product testing & procurement 3- DVP monitoring ,schedule on check ,CAPA 4- Complaince of external audit , ie IATF etc 5- lab expenses monitoring & control as per budget 6- New capax planning & , old equipment scrap 7-review on man ,machine for full utilizationn 8 skill upgradation of lab team 9- timely test plan & test report submission & meeting customer timeline 10 EMI/EMC testing planning ,setup at out side lab /Internal lab & failure diagnosis 11-electrical testing ,resource planning & arrangement & specs compliance 12 planning of out side testing with support third party lab Preferred candidate profile Perks and benefits

Min 15 years of exp in Machining quality, VDA 6.3 is must. Experience of Forging industry only considered Familiar with TQM principles, iso 9001,iso 14001,TS process knowledge like Press Forging, machining, cnc, vmc etc. Able to handle OEMs Required Candidate profile Candidate must be B.tech with atleast 12 years experience of handling Quality Assurance Handling customer audits, Working on rejection & rewor. Candidate must have excellent communication skills.

Responsible for lithium-ion battery cell ageing/ activation process engineering. Trouble shooting of the cell measuring instruments. Identifying the improvements in existing production line. PLC programming, quality management, IATF 16949,

Monitor manpower in shop floor, Need to manage Material movement from Production line to shipping area & Repacking, Material Loading & dispatch as per customer requirement, Should have sound knowledge of IATF, Should have sound knowledge of IMS.

DailyMorning meeting with inter dept’s for PPC Vendors & CNC plan, Inventory Monitoring,SAP Knowledge Forecasting the order flow & planning the action plan Planning ofM/c Shop Production as per Customer Schedule on a daily basis. Required Candidate profile Production planning according to customer. Good SAP Knowledge for Maintain Material Posting. Machine shop Production,CNC Plan Milk run activities Inventory plan ,Monitoring

Role & Responsibilities To Monitoring Customer Complaints & minimizing complaints through action taken. To Monitor all area PPM (Final Inspection & escalation to respective areas for improvement & provide support to achieved defined targets. Responsible for adherence of Quality management system & align with TS 16949/Customer requirements on monthly basis. Effectiveness Monitoring of Corrective & preventive action plan. Improve Customer Rating. Preferred candidate profile Educational Qualification: B.Tech Mechanical Engineer Experience: 8+ Years Any additional requirement: Leadership Skills /MS Office/Team Building Skills/ Good Communication Skills/Experience on SAP Preferred Industry Type: Automotive Perks and benefits

Oversee quality control, ensure adherence to industry standards. Required: 10+ years experience.

Diploma/B.tech min 5 years in Casting design, foundry tooling development in a Green sand moulding facility. Skilled in Engg. drawings, gating calculations of Grey Iron & SG iron, RFQ feasibility & 3D design software like NX. Required Candidate profile Diploma/B.tech min 5 yrs exp in Arpa 450/900 line with pattern making, gating systems & metal casting processes. IATF knowledge mandatory.

We are Hiring For QA Head Exp-10 yrs Salary-70-90k Skills- Documents, Strong Audits Knowledge like ISO, IATF,PVC Knowledge Automobile , exp in Plastic Industries, Thank you Kajal [HR Recruiter] Career Management Center +91-7042740655

We Are Hiring for Qc Head Exp-8-12k Salary- 70-80k Skills-Handling customer complaint of documents Audits Knowledge like ISO, IATF QA head require hai same plastic line... Thank you Kajal [HR Recruiter] Career Management Center +91-7042740655