39 Htri Jobs - Page 2

Job Title: Engineer / Sr. Engineer Mechanical Design Experience: 6 - 10 Years in Heat Exchanger / Pressure Vessel Design Location: Hosur, Tamil Nadu Job Type: Contract (Full-time) Job Scope:- The Mechanical Design Engineer will be responsible for designing products that meet customer specifications while ensuring compliance with relevant industry standards. Key Responsibilities:- Review customer specifications, identify deviations, and coordinate clarifications. Design equipment as per the scope of the purchase order and applicable specifications. Prepare and submit design calculation sheets for client approval. Develop equipment data sheets and respond to client queries. Conduct mechanical calculations for Pressure Vessels (ASME Section VIII Div. 1) and Shell & Tube Heat Exchangers (ASME & TEMA). Prepare technical specifications for raw material procurement. Communicate design changes affecting materials to the purchase department. Ensure all design documents comply with ISO standards. Obtain approvals for U-Stamp design calculations from the Authorized Inspector (AI). Perform structural calculations considering wind and seismic data. Qualification & Skills Required:- Education: BE in Mechanical Engineering Experience: 6 - 10 years in Heat Exchanger/Pressure Vessel Design (preferably in a U-Stamp approved manufacturer or reputed EPC company) Technical Expertise: Mechanical calculations for Pressure Vessels & Heat Exchangers as per ASME & TEMA standards Structural calculations for equipment support Knowledge of PED (Pressure Equipment Directive) and ASME material specifications Good engineering practices. Software Skills: AutoCAD, PV Elite, MS Office Thermal design software (HTRI / ASPEN) desirable Soft Skills: Strong English communication (written & spoken) Benefits: Competitive salary & benefits package including health & retirement plans Professional development, training & career advancement opportunities. Interested candidates can share their updated CV at jaya.singh@talentnetworks.co.in.

Roles: Ensure Proposal & Design Engineering phase is completed effectively and efficiently following order confirmation, ensuring all engineering requirements are met and executed according to the project schedule. Thermal design of Heat Transfer equipment's, Heat exchanger selection based on operating fluid such as Liquid / Liquid , liquid /Gas , Gas/ gas , condensing medium , boiling medium, etc.. Thermal design of Fired heater or exchanger, combustion calculations, Burner Management system, Fuel oil/ fuel Gas train design, Flues Draft calculation, Chimney or stack sizing , Blowe sizing and selection etc.. Lead & preparation and review of various specification & codes, local regulations, detailed engineering drawings, Client coordination , technical discussion , Rise TQ, Provided response to client comments, get approval from Client/ PMC etc.. Provided Interdisciplinary engineering input for respective engineering, design and manufacturing , support for performance test. Prepare RFQ & Data sheets for bought outs like heating elements , burners, blowers, control valves , technical evaluation , approval of vendor design and drawings etc... Ensuring that they align with project requirements and are prepared utilizing available resources. Coordinate with other teams and departments to ensure seamless project execution and compliance with technical specifications. Responsibilities Responsible for design and analysis of Heat Exchanger like Shell and Tube Heat Exchanger ( TEMA & API 660), Air Cooled Heat Exchanger (API 661) and Jacketed Pipe Heat Exchanger using HTRI in accordance with Design Basis. Preparation of process Design basis , Technical specification, BOQ for Heat exchanger for standard and non standard exchanger. Perform detailed sizing calculations for 2-Phase and 3-Phase Separators (API 12J), considering both Horizontal and Vertical configurations. Design and optimize Knock-Out Drums, ensuring they effectively separate liquid and gas phases, preventing downstream system issues. Ensure that sizing and design meet the required safety and operational performance standards. Development of BFD, PFD and P&ID for the Separator Packages and New Product Development. Work closely with the drafting team to ensure these diagrams are clear and meet client and regulatory requirements. Conduct a thorough review of Orientation & Elevation Drawings, Thermal Datasheets, Mechanical Datasheets, and Specifications provided by clients. Identify any discrepancies, missing information, or inconsistencies within the documents and communicate these issues effectively to the client.Send queries and seek clarifications from clients as necessary to ensure that all documentation is accurate, complete, and in line with the projects needs. Review of Orientation & Elevation Drawings, Thermal Datasheets, Mechanical Datasheets, and Specifications provided by clients, along with sending queries or seeking clarifications as needed." Performing simulation using Aspen Hysys. Performing Process calculations like line sizing, pump hydraulics and Valve selection. Preparing / Checking of Datasheets & Supporting procurement team. Review of Sub-vendor drawing & documents for technical compliance. Providing input to drafting team and guiding them in preparing PFD & P&ID. Attending inter discipline meetings & review with client. Monitoring and meeting the project schedules on submission of Process Deliverables.

Qualifications: B.Tech/B.E. Chem/Mech. / M.Tech Chem/Mech. Experience: 10-15 Years Role: Plan and execute project design and drawing. Guide team for ensuring working on plan and completion. Complete design knowledge and codes for pressure vessels, heat exchangers and other range of products of HRS. Manage internal and external customer response times for time completion of mechanical data sheets, fabrication drawings to specific codes like ASME, TEMA, etc. Initiate and monitor process improvement activities like drawing and design standardization, use of updated design software like PV Elite, AutoCAD, Solidworks etc, for enhancing quality of projects. Coordinate with manufacturing department for quality & timely delivery of end product. Plan for project execution and commissioning according to commitments to customer. Customer visits for project discussions and approval. Job Profile: B.E./B.Tech./M.Tech. Mechanical or Chemical Engineer. 10-15 yrs of relevant industry experience (shell & tube heat exchangers, pressure vessels) Knowledge of design codes like ASME, TEMA, PED are essential. Knowledge of ERP and design software like AutoCAD (2D, 3D), SolidWorks, PV Elite, HTRI, ChemCAD, etc.

Role & responsibilities Project safety lead discipline engineering activities/deliverables developments such as HSE/Process safety Philosophy, Fire and Gas Detection layouts, Active & Passive Fire Protection Systems, Hazardous area classification requirement in Basic, FEED & Detail Engineering design of Petrochemical, Refinery, Oil & Gas onshore/offshore process Plants. Process Safety Lead engineering activities for specifying the safety and Loss Prevention Requirements, Carrying out Safety Reviews & Process Hazard Analysis Studies (HAZID, HAZOP, SIL, HAZAN (Consequence analysis) and Risk Analysis /Assessment, HSE/safety CASE Development, HSEIA). Well experienced in Process Plant operation & stabilization, safe start up and shutdown activities, handling of plant trouble shootings and commissioning activities. Also well versed with technical services activities for process safety issues, Project Engineering, vendor co-ordination, Pre-commissioning & Commissioning activities. Process safety incident reporting/evaluation and investigation. Preparation of process safety equipment Data sheet, specification, RFQ documents, Scope of work development for safety engineering studies. Technical Bid Analysis and Vendor Document Review. Proposal preparation, Vendor Evaluation. Familiar with review of software input and output and modelling work. Overall Engineering and vendor coordination, developmental activities, and other Project functions. Conversant with various NFPA, API standards, IEC, IP, Shell Standards, OISD standards, GAP Guidelines. Facilitation of and participation in HAZID, HAZOP, LOPA and other risk management workshops. Providing leadership and quality assurance for deliverables to clients. Demonstrated strong skills in one or more of the following: Quantitative Risk Assessment (QRA). Integrating process safety within the design process and/or operating practices PHA facilitation (HAZID, HAZOP, LOPA, SILA, etc.) Consequence and frequency analyses Fault / Event Tree Analysis Quantitative Risk Assessment (QRA). Authoring Safety Cases, including ALARP demonstrations Bow Tie Analysis Fire & Explosion Analysis. Fire Protection related studies. Excellent problem-solving skills and ability to provide advice on technical issues both externally and internally. Adaptable to changing working hour requirements as needed to accommodate project work and client needs in other time zones. The above responsibilities are in brief but not limited to it & other task may be given as per the business requirements Preferred candidate profile Experience 6 to 8 Years experience in Oil and Gas, Chemicals in EPC or Consultant Companies Education BE Chemical or Environmental Engineering

Facilities Engineer Please copy and paste the below link into your browser to apply for the position in the company website. Please find the link to apply: https://jobs.exxonmobil.com/job-invite/80180/ ExxonMobil is organizing scheduled in-person interviews at Mumbai on 26th & 27th April 2025 for Facilities Engineer roles. Work Location: Bengaluru (Last date to apply is 20th April 2025) Note: Shortlisted candidates will receive an interview invitation letter from recruiting team. Please find below JD. What will you do The key responsibilities for the Facilities Engineer will be: Develop comprehensive understanding of process systems and the integration of systems. Collaborate with multi-discipline teams to build facility surveillance plans and review findings with global site teams. Perform real-time process surveillance monitoring, optimization, remote troubleshooting and reporting. Identify deviation and provide resolution to Operations team Use analytical tools for data driven analysis for enhanced visualization and identification of actionable insights Assess, categorize, and allocate downtime and perform facility mass balance Identify, map, and monitor facilities constraints. Identify options to improve/control constraints Troubleshoot & optimize equipment/processes including heat exchangers, separators, pump/compression units, fractionation units, acid gas treatment units, water treatment units, refrigeration and gas liquefaction units, process safety systems, and process control systems Perform root cause analysis investigations for equipment failures or process upsets Applying ExxonMobil and Industry Safety in Design Standards and requirements in change reviews at existing production facilities and greenfield/ brownfield projects Facilitating Hazard and Operability (HAZOP) studies and executing other project deliverables. Quantitative and Qualitative Risk Screenings and Assessments. Accountable to deliver engineering packages to site for procurement and construction by working closely with Contractor, Business Unit and other engineering disciplines Support Management of Change for facilities modifications including development of scope and completion of engineering deliverables for both routine maintenance and turnaround scopes. Lead and steward Management of Change including coordinating with other disciplines and operations, conducting risk reviews when appropriate, and updating documentation Accountable to deliver engineering packages to site for procurement and construction by working closely with Contractor, Site team and other engineering disciplines Work closely with the Engineering contractor in reviewing the proposals, develop the engineering cost and Schedule and submit it to site. Identify and progress capacity enhancement, reliability improvement and cost reduction initiatives to improve unit profitability Develop and modify process simulation models using standard process modeling software (i.e.,Aspen HYSYS, HTRI, etc.) Provide coaching and mentoring to early career engineers Support commissioning / start-up / turnaround activities at site as needed. About you Skills and Qualifications Bachelors degree in Chemical/Petroleum or Mechanical engineering from a recognized university Minimum of 5 years of work experience within the oil and gas industry (Upstream, Refining, or Petrochemical) in Process Engineering, Operations Support or Technical Services role(s) Experience and competency in various Oil and Gas Industry Process Design and Process Safety standards. Strong interpersonal skills and written/verbal communication skills in English Proficient in Microsoft Office suite of software program Willing to work in shifts (1.30 PM 10.30 PM IST) or (9:00 AM -6:00 PM IST) Tool proficiency: Aspen Hysys/HTRI/PRO-II Strong organizational, planning/coordination, interface, and technical judgment skills Demonstrated experience and proficiency in mentoring early career process engineers Ability to work both independently and collaboratively with multi-disciplinary teams Willing to work full-time from Bengaluru based office location Willing to work flexible working hours to provide around-the-clock support forglobal affiliates Willing and able to travel nationally and/or internationally as required. Thanks & Regards, Sultan.

Work as part of the Process Engineering Project Team with specific responsibility for: Process optimization. Preparation and Development of basis of design, heat and mass balance, process flow diagrams, P&IDs, equipment and instrument sizing and data sheet. Hydraulic calculation, thermal rating of shell & tube heat exchangers and pressure relieving calculation. Process simulation (HYSYS/Pro-II). Estimation of utility consumption. Preparation of operation manual. Managing to the overseas engineering centers. Interface & coordination design activities, managing to the process related parties, such as Client and the other EPC contractors. Requirements Bachelor's Degree in Chemical Engineering from a recognized university. Work experience of more than 10 years in all facets of Process Engineering Design of large Oil & Gas/Petrochemical facility development. Knowledge of the following design software packages: Process Simulation Software: PROII, HYSYS Thermal Rating Software: HTRI A high standard of English language ability both written and spoken. Ability to use the Microsoft Office environment in all aspects of daily work. Highly ethical - accountable for actions and statements. The leadership qualities to lead, delegate tasks and organize the team. Ability to understand and interpret complex problems and explain them to others. High attention to detail and proactive follow up. The willingness to take responsibility as delegated and make decisions at appropriate times within the authority level. Striving for excellence in efficiency, safety and profitability. Benefits Covered under life insurance Covered under group medical insurance (Self, Spouse, Children & Parents)

Skill required: IX Intelligent Asset Management Operations - Asset Data Management Designation: Asset Performance Mgmt Senior Analyst Qualifications: Any Graduation Years of Experience: 5 to 8 years What would you do? Role:Process Simulation EngineerThe Process Simulation Engineer is part of the Process Engineering and Automation Chapter within Client's and supports Client's Facilities and Operations of the Future program. This role is responsible for work supporting key research and development of digital engineering computer-based modeling and simulation tools to enhance the company s facilities engineering models. This role involves working with various types of equipment models, including facilities process models, pipeline models, and other specialty models. The engineer will utilize steady state process models, dynamic process models, data-driven models, and special modeling technologies to evaluate improvements to process simulation workflows. What are we looking for? B.S. Process/Chemical EngineeringSignificant field (10+ years) experience working process engineering and/or process control roles in the Downstream and/or Upstream sectors of Operator or EPC companies in the Oil and Gas value chain.5+ yrs of experience in software engineering, data engineering and cloud computing platforms (Azure).PhD (preferred), M.S, in a STEM-related field such as Chemical Engineering or Computer Science.Proficient with Agile and Waterfall project management methodologies and tools. Proven experience using Azure DevOps for managing user stories, dashboards, queries, code repos and code version control.Prior experience with programming languages such as Python and C# , and data science libraries such as Numpy, Scikit-learn, Pandas, Matplotlib, Seaborn, Keras, TensorFlow.Experience with process simulation and monitoring software such as Hysys (required), Flarenet (required), ProII (required), AspenOnline (preferred). Roles and Responsibilities: Research & Development of new technologies in Digital Process Systems Engineering space. The roles spans technologies related to process simulation & modeling, process control and optimization, technical safety, among others.Identification, scoping, development and timely delivery of Product Features and User Stories under Scaled Agile Framework (SAFE) or Waterfall project management methodologies.Interfacing with a broad set of stakeholders in Client Technology Center and Business Units, and with external parties such as industry partners and vendors.Research, develop and oversee R&D efforts for process simulations for facilities engineering models.Utilize tools such as Aspen HYSYS, Promax, and HTRI for process modeling and simulation.Evaluate engineering documents such as process flow diagrams (PFDs) and guidelines to develop simulations of simple processes.Resolve basic modeling issues and assist with the interpretation and reporting of modeling results.Follow established guidelines for thermodynamic packages and specific technology modeling strategies. Qualifications Any Graduation

We have an opening for a Process Design Engineer Vacancy for: Process Design Engineer (Permanent) Location: Gurgaon Experience: 10 Years Job Description: Preparation and review of all kinds of process engineering deliverables. Experience in process design of O&G and Chemical projects in an EPC environment. Experience in PFD and P&ID development, equipment sizing, system hydraulic calculations, and safety valve. Process engineering calculations, Preparation, and checking of process engineering deliverables, Clear concept of basics (basic calculation, thumb rule of Chemical Engineering) Utility balance and calculations. Familiarization with Process Simulation software applications like Aspen Plus, HYSYS, HTRI etc. Knowledge about the development of equipment and instrument datasheet. Possess good knowledge of safety meetings such as HAZOP etc. Interface with Leads of other departments to reflect the as-on-date input from others. Ensure quality by adherence to the companys quality document. Communicating with Customers (as and when required) and vendor for effective resolution of the various technical issues being faced

Candidate should able deliver training to engineers, knowledge of process plant design & site engineering, codes standards, documentation, design & analysis, fluid phase behavior, pipe hydraulics line sizing, equipment design, cost estimation

Should have good working experience with Process softwares like AspenPlus, Hysys, PROII, FlareNet, KORF, AFT, HTRI etc. Process Engineer with design experience in Process Engineering of Brownfield projects (Pre FEED,FEED,DD) .

Roles and Responsibilities Design and develop static equipment, including pressure vessels, heat exchangers, tanks, and other related equipment, ensuring adherence to project specifications and industry standards. Conduct design calculations, stress analysis, and other engineering assessments for static equipment using specialized software (e.g. PV Elite, NozzlePro, HTRI) Prepare detailed design documentation, including drawings, technical specifications, and reports. Review and interpret project specifications, codes, and standards (e.g., ASME, EN, API) to ensure designs meet the required criteria. Assist in the selection and sizing of materials and components, considering mechanical properties, safety, and cost-effectiveness. Perform inspections, testing, and quality assurance procedures to ensure equipment meets performance and safety standards. Participate in design reviews and client meetings, providing technical support and recommendations. Troubleshoot design-related issues and provide solutions to improve functionality and efficiency. Stay updated on industry trends, new technologies, and regulatory changes related to static equipment design. Benefits Competitive salary and benefits package. Opportunities for career advancement and professional development. A collaborative and dynamic work environment. Health and wellness programs.

Design, optimize, and troubleshoot processes for oil and gas production. Develop PFDs, P&IDs, and perform process simulations. Ensure HSE compliance, support commissioning, and enhance plant efficiency with technical solutions and safety protocols. Required Candidate profile Experience in Oil & gas Industry for - Control Systems - Process Design - Process Monitoring & Optimization Send CV to corejobs@consultasia.in with Specialization

D.M.E. / B.E. - Mechanical Engineer with Min. 15+ Years experience in Pressure Vessel & Heat Exchanger Estimation & Costing. Preparation of technical offer. Product Knowledge: Pressure Vessel & Heat Exchanger Code Knowledge: ASME, TEMA, API Required Candidate profile To prepare actual job cost & analyze with budget for gaps. Understanding of major International code such as ASME Section VIII Division 1 & 2, TEMA, API-661. Software Knowledge - AutoCAD, PVElite. Perks and benefits Negotiable - Depending Upon Candidate & Experience

Job Requirements Process Engineer in Oil & Gas domain with upstream or refinery experience. Involved in process calculations for cross country pipelines, Root cause analysis, Simulation studies , multiphase flow, and well head operations during normal, emergency, start-up & shutdown. Prepare and review PFD, P&ID , Heat and Mass Balance calculations, multiphase and surge calculations, hydraulic and pressure drop calculations Preparation of process parameters in pipeline datasheets Experience of risk studies and Brainstorming on Process units involving consequences and safeguards based on the nature of Risk and associated response systems. Preparation and review of Process datasheets of equipment such as Separators, Heat exchangers, sizing of PSV’s and Control Valves. Procedures for Testing and commissioning of pipelines including Hydrostatic test, Pneumatic test, chemical cleaning and their method statements. Requirements and Types of Insulation and associated process calculations Participated in MOC studies and recommendations Pressure Surge Analysis using SPS pipeline hydraulic simulator SPS surge studies for a single flow control device SPS surge studies for a multiple flow control device using Model lab simulations. SPS simulation data extraction and processing SPS overpressure mitigation studies Pipeline Maximum Operating Discharge Pressure (MODP), Pressure Derate, RV Sizing, and Hydrostatic test calcs. Run MODP Calculations based on pipe design and hydrotest info using PA Tool for each pipeline segment. Provide Psafe calculations for MODP Derate, gather pressure data from Control Centers for derate calculations. Gather field data for RV sizing, determine the overpressure scenario, identify fluid type and properties at relieving condition, set pressure and overpressure allowance, determine the actual orifice size, calculate the required relief rate. Determine Hydrostatic test pressure for pipeline replacement projects. Work Experience Chemical engineering or equivalent degree is required. 8-12 years’ experience with upstream / refining domain and cross country pipelines background is required. Good understanding of process unit operations and process calculations, including, fluid flow principles, and reaction principles, is a plus. Working experience with HYSYS and HTRI is an advantage Must have good technical communication skills. This includes ability to communicate efficiently and effectively with unit engineers to understand their issues and problems and communicate solutions.