3955 Hmi Jobs - Page 39

Project Execution Engineer -Services (ID IBS) About the position This position is for an Industrial Automation Engineer who will be part of Schneider Electric Services business based in Gurgaon / Mumbai. You will be acting as the responsible commissioning engineer overseeing the installation, commissioning, and services of Industrial Automation Systems (PLC, Drives, ESP-Rotating) for assignments classified as medium commissioning complexity. Managing completion of all commissioning activities efficiently and cost-effectively and in accordance with contract specifications, quality standards, and safety requirements. Functional Experience in leading / team member of large cross functional /domain project teams. Coordinating the overall governance for the project including Safety, Quality & Profitable timely closure Capture and monitor all key metrics as required by the Schneider Electric Customer Service and Quality teams Field Engineering and site planning, execution Ability to validate change requests Experience in Change management/Business Transformation Close working with Channel Partner / Tendering / Sales Technical Hands on design and develop PLC/VFD/SCADA/HMI Program for New and existing system preparation /Validation of Bill of Material of PLC /Drive / SCADA Projects as per system requirement Hands on experience on Tools-Test kits Extensive experience in troubleshoot and resolve issues related to PLC/VFD/SCADA/HMI based on site conditions Hands on experience on various communication protocols Ethernet TCP/IP, Modbus TCP/IP, Can open, Modbus, Profibus etc. Experience in delivering TM221/TM200/TM251/TM262, M340/M580/Quantum/Premium/Plant SCADA, EPE, ESE Prior experience in Service/Audits/Annual Maintenance Contracts/Schneider Automation Projects/Site analysis/VFD Projects. Essential Day-to-Day Responsibilities: Escalate and identify other routes where progress is stuck Tracking and following up the action items at a project level Ensure all requests are addressed in a timely manner with optimal solution Simplify – use every opportunity to simplify to the maximum extent possible and go the extra mile in doing so Collaborate with internal teams to address Business needs Assume personal responsibility for achieving defined outcomes Effectively plan & organize work to deliver consistent results Ensure regular and optimal communication with all stakeholders Stakeholder Management Ability to challenge status quo and lead discussions in the right direction Desired Skills Knowledge of Design/BOM/Engineering/Execution/Troubleshooting - PLC/DRIVE/HMI/VFD as well as solutions Project Management & Services Sales Familiar with latest Digital Trends in Automation oriented projects and customers Familiar with Various communication Networks Critical thinking & problem solving Crisis/conflict management with partners (Suppliers, distributors & consultants) Qualifications Engineering Graduate with 8-12 Yrs relevant experience with excellent communication & coordination skills Experienced in managing small-mid size team of Technical experts preferably in Industrial Services/Project domain & reporting in highly matrixed organization Schedule: Full-time Req: 009BBA

In our multicultural HVDC control team you will design, implement and verify control systems for HVDC substations, in cooperation with project management, system- and equipment designers as well as with our customers. Firstly, you will prepare concepts for control functions and implement these functions in DIGSI. Afterwards you will integrate and verify these functions together with your team colleagues in a hardware-in-the-loop (HiL) test setup. You will share your knowledge by creating documentation and performing trainings with colleagues as well as customers. Your new role challenging and future- oriented: Design of BCU-based substation control systems for high voltage direct current systems (HVDC) Implementation of control software in as well as verification using simulation tools and real-time test environments Preparation of design specifications, documentation and effort estimations Clarification of technical requirements within project teams as well as with customers and suppliers Remote support during commissioning and service of HVDC systems We dont need superheroes, just super minds: University degree in electrical engineering with focus on energy technology and first professional experience Very good knowledge in parameterization of bay control units (BCUs), ideally of SIPROTEC 5 devices with DIGSI and CFC (Continuous Flow Chart) Experience in the realization of the standard IEC61850 for substation control and for data exchange with higher level automation and SCADA systems Good knowledge in high voltage and substation technology as well as in the design of interlocking schemes and automated control sequences Good knowledge in secondary interfaces of high voltage components such as switching devices, transformers, CTs and VTs Very good English language skills Weve got quite a lot to offer. How about you? This role is based on Gurgaon/ Chennai. Youll also get to visit other locations in India and beyond, so youll need to go where this journey takes you. In return, youll get the chance to work with teams impacting entire cities, countries and the shape of things to come.

Company Description Established in 2002, ib vogt GmbH is specialized in the Development, Design and Engineering, Financing, EPC and Operation of solar power and provides turnkey solar power plant solutions to investors internationally. As a manufacturer-independent integrated developer, the company focuses on tailor-made solar power plant solutions that maximize lifecycle performance and returns. Since 2009, ib vogt has commissioned plants with a capacity of almost 2 Gigawatt. We employ over 840 specialists, in all areas of the solar power plant value chain in over 40 countries. The company operates internationally from offices in Spain Germany, Italy, Netherlands, France, Poland, USA, Australia, United Kingdom, Panama, India and Southeast Asia. Job Description You shall perform the following functions including but not limited to: Design and implement SCADA systems for new solar and wind projects, including hardware and software architecture. Program and configure SCADA software. Integrate SCADA systems with field devices (RTUs, PLCs, IEDs, sensors, inverters, WTG and meteorological stations). Develop HMI/GUI for remote operations, visualization, and alarming. Work with communication protocols such as Modbus, DNP3, IEC 61850, OPC UA. Coordinate with EPC contractors, OEMs, and IT teams to ensure compatibility and cybersecurity standards. Support commissioning and testing of SCADA systems during project construction and energization. Monitor and troubleshoot live SCADA systems; ensure minimal downtime and accurate reporting. Maintain detailed documentation for SCADA systems and provide training to operations staff. Stay current with industry best practices, grid interconnection requirements, and cybersecurity standards. Qualifications Educational Requirements: A degree in Electrical/Electronic Engineering or a related field. Advanced degree or professional certifications in related fields. Experience: Minimum of 5 - 10 years of hands-on experience in SCADA system engineering, preferably in the renewable energy sector. Technical Expertise: Strong understanding of control systems, instrumentation, and electrical schematics. Hands-on experience with PLC/RTU programming and SCADA system configuration. Familiarity with power plant operations, data acquisition, and remote monitoring. Working knowledge of cybersecurity protocols in industrial control systems. Preferred Attributes: Excellent problem-solving, analytical, and communication skills. Ability to travel to project sites as needed. Experience with international solar projects and standards. Strong leadership and team management skills. Additional Information We offer you: A truly international working environment with colleagues from all over the world An open-minded, friendly and highly motivated team. Great opportunities for professional and personal development Interesting and challenging tasks Competitive remuneration (based on experience)

Dear All Greetings of the day!! Kahan Controls is hiring Sales & Marketing Engineer @ Delhi location. Job description - Should have sales experience in HVAC and Refrigerator controllers and Automation like, : "Variable Frequency and Drive, HMI, Temperature microcontroller, Scada PLC,BMS, IOT, Transmitter. Desire Profile: Male candidate . No female candidate can be considered. Qualification – B.E-EEE, ECE, E&I, Mechatronics. (Mechanical Engineer would not be considered. ) Please note that should have sales experience in Industrial Automation Engineer. Interested candidates can share resume on jobs@kahancontrols.com Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹40,000.00 per month Benefits: Cell phone reimbursement Work Location: In person Application Deadline: 25/08/2025

About Us: Ingenium is a forward-thinking engineering solutions provider specializing in Industrial Automation, Control Systems, SCADA, DDC/PLC programming, and Smart Infrastructure. We work across key industries such as Data Centres, Pharmaceuticals, Healthcare, and Manufacturing, delivering smart, reliable, and scalable automation systems. Position Overview: We are looking for enthusiastic and technically sound candidates to join our engineering team as Programming/Project Engineers. This role is open for experienced professionals with a passion for automation and control systems. As part of our team, you will be involved in real-time projects from day one—learning, contributing, and growing under the mentorship of industry experts. Key Responsibilities: Assist in the design and engineering of automation and control systems. Learn and contribute to PLC/DDC programming and SCADA development. Participate in the setup, calibration, and configuration of field instruments. Support the testing and commissioning of systems at project sites. Prepare and maintain technical documentation and project reports. Gain exposure to control panel design, wiring diagrams, and system architecture. Provide technical support and interact with clients under supervision. Note: Responsibilities will be assigned progressively based on experience and training. Eligibility & Requirements: Educational Qualification: bachelor’s degree in Automation, Instrumentation, Electrical, Mechatronics or Electronics Engineering. Core Competencies: Strong interest in industrial automation and control systems. Effecient understanding of PLC/SCADA systems (training/internship experience is a plus). Familiarity with AutoCAD or similar design tools is desirable. Willingness to learn and work on-site during project execution. Preferred (For Experienced Applicants): Minimum 5+years of experience in PLC/SCADA/HMI systems, especially with Siemens, Allen Bradley, or Schneider Electric platforms. Exposure to HVAC systems, building automation, or power monitoring is advantageous. Other Details: Open to both male and female candidates. Strong communication, problem-solving, and teamwork skills are essential.

We R. S. Automation (Sachin GIDC, Surat) based Industrial Automation company is looking for DEGREE Engineer Electrical, Instrumentation, EC/ Fresher or Experienced Candidates who have basic knowledge in Industrial Automation devices, Like Control Panels, VFD, Servo, Stepper Motors, HMI, PLC, Controllers. For their Surat branch. Candidate will be working on field, on various Product or Machine manufacturing sites, in various domain like, Textile weaving, Yard, Plastic, Pharma, Engineering, Dying, Chemical and many more. As a fresher Initial training will be provided to you, about various automation devices and applications. Must have following qualification , satisfy following requirement. 1. Degree in Electronics and Communication/ Instrumentation and Control/ Power Electronics/ Electrical Engineering 2. Candidate must have their OWN BIKE , to travel within city. 3. Candidate should be native or living in Surat City or Nearby region like Navsari 4. It is a field job, where a candidate has to work on site for installation or troubleshooting of control panels in various industry domains. 5. 6 (Six) Month Probation Period will be there. About Company: R S Automation has been established in year 1999 As A Group Company of Rutu. Young and dynamic Team members are always looking for better, reliable and effective solution to grow up our customers and better living environment. Wide experience in industrial automation. Trustful and positive relation with customers as well as suppliers, wide experience as a solution provider, Strong service support team and win win attitude makes R S Automation as a fast growing organization. We are largest supplier of PLC, HMI, Servo drives, AC drives, Motion controller based Automation Panels, Power panels, Synchronization panels, Heating control panels, etc. Job Types: Full-time, Permanent, Fresher Pay: ₹20,000.00 - ₹30,000.00 per month Benefits: Cell phone reimbursement Commuter assistance Health insurance Internet reimbursement Paid sick time Paid time off Provident Fund Experience: Industrial Automation: 1 year (Required) Work Location: In person

Job Title Automation Engineer — PLC/DCS & Instrumentation Role Overview We are seeking a seasoned Automation Engineer with hands-on experience in PLC systems, process instrumentation, and control system integration. The ideal candidate will bring deep technical expertise, strong project execution skills, and the ability to collaborate effectively with engineering teams and vendors across EPC projects. Key Responsibilities Develop and review system architecture, I/O lists, and control philosophies. Specify and integrate third-party systems and drive control schemes. Plan and execute hardware and software Factory Acceptance Tests (FAT) for PLC/DCS panels. Support installation, site acceptance, and commissioning activities for control systems. Participate in internal and client-facing project review meetings and maintain clear documentation. Resolve technical queries related to logic, hardware, HMI, and communication protocols. Manage deliverables across multiple EPC projects to ensure timely completion. Use MS Office tools for documentation, reporting, and handover packages. Desired Skills & Expertise PLC logic and HMI development experience (Siemens and Rockwell preferred). Strong understanding of process instrumentation (pressure, flow, level, temperature, analytical). Familiarity with industrial communication protocols and Boolean logic. Hands-on experience with Siemens S7-1200 to S7-400 and Rockwell MicroLogix/ControlLogix. Working knowledge of Schneider and Honeywell control systems is a plus. Qualifications BE/B.Tech in Instrumentation, Electronics, or Electrical Engineering. 6–10 years of relevant experience in automation and control engineering Skills: automation,instrumentation,engineering,rockwell,siemens s7-1200 to s7-400,rockwell micrologix,controllogix,honeywell systems,schneider,protocols,communication protocols,boolean logic,plc logic,hmi development,epc projects,commissioning,installation,plc/dcs panels,automation engineer

JD: Electrical Engineer Job Description Summary We are seeking an experienced Electrical Engineer with expertise in industrial automation and Control systems. The candidate should have advanced skills in PLC programming, VFD, Sensors, HMI and SCADA development, Control cabinet electrical design per UL 508A, Sizing of wiring & Breakers, Heat calculation of cabinet, VBScript, and electrical knowledge in motor starters and motor control stations. Roles and Responsibilities Design, program, and configure PLCs series to automate industrial processes efficiently and reliably. Develop HMI (Human-Machine Interface) and SCADA (Supervisory Control and Data Acquisition) systems using industry-standard software. Control cabinet electrical design per UL 508A, Sizing of wiring & Breakers, Heat calculation of cabinet Strong knowledge in making electrical schematic using DraftSight / Solidwork Electrical. Create user-friendly interfaces for operators and engineers to monitor and control industrial processes. Utilize VBScript and other scripting languages to customize and optimize control systems for specific requirements. Apply extensive electrical knowledge to design and troubleshoot control systems including PID controllers, electrical schematics, motor starters, and motor control stations. Collaborate closely with cross-functional teams to gather requirements, create control system specifications, and ensure seamless integration. Troubleshoot and resolve control system issues promptly to maintain system performance. Ensure compliance with industry standards, safety regulations, and quality control procedures. Skills and Qualifications Bachelors degree in electrical engineering. 3 to 5 years of experience as Electrical Engineer in industrial automation. Expertise in PLC programming Proficiency in HMI/SCADA development using software. Extensive knowledge of electrical systems, including schematics, motor control, and power distribution. Familiarity with industrial communication protocols (e.g., Modbus, BACnet, ProFiBus, ProFiNet, Ethernet/IP). Experience with electrical schematics, P&IDs, and control panel design. Excellent problem-solving skills and the ability to troubleshoot complex control system issues. Effective communication and collaboration abilities. Desired Characteristics Established project management skills. Takes strong Initiative, highly proactive, Self-starter, result-oriented, analytical, and able to multi-task. Good at Decision making. Strong customer-focused approach. Humble: respectful, receptive, agile, eager to learn. Transparent: shares critical information, speaks with Candor and contributes constructively. Focused: Quick learner, strategically prioritizes work, committed. Demonstrated creativity and ability to lead amongst peers and be accountable for team results in order to deliver a high-quality product on time.

Job Description Summary Come Join Our Software Integration Team!! Our main activity consists in setting up GE Vernova software in different environments for internal and external customers, supporting project activities and providing expertise in tailoring the components based on requirements. We have a hybrid work environment as we work from home, the office and travel to customer sites as needed. The integration engineer is a key member in all projects, being engaged throughout the full lifecycle (Development, Factory Acceptance Tests, Site Acceptance Tests, Cutover, Support). Job Description GE Vernova allows us to bring a significant contribution to the Worldwide Electrical Energy context. Delivering on life-critical solutions we are deeply immersed into the worlds of Transmission, Distribution, Asset Management and Market Management making sure we shape how the energy landscape looks today and tomorrow. Our teams breathe software-life into R&D, Services and Support for GE Vernova Electrification Software’s products while liaising with stakeholders and customers all around the globe. GE Vernova is a global provider of software, hardware, services, and expertise in automation and embedded computing. We offer a unique foundation of agile and reliable technology providing customers a sustainable competitive advantage in the industries they serve, including energy, water, consumer packaged goods, oil & gas, government & defense, and telecommunications. The activity within this office consists of development and implementation of: Energy Management Systems (EMS) Distribution Management Systems (DMS) Different specialized teams for distinct technical fields contribute to the realization of these systems. (hardware, communications, databases, HMI, applications). One of the activities, carried out in the mentioned context, is engineering for specific monitoring and control of power systems applications (power flow, short-circuit calculation state estimator, contingency analysis, optimization in power systems, voltage control, load frequency control, power reserve management, load forecast, stability analysis, transient regimes, modeling of the equipment, of the automation and protection systems in power plants and of the power grids, energy market models). Main job responsibilities: Development of the mathematical models of the physical phenomena in the power systems Software development for real-time applications (code, testing) Carrying out the analysis to define the specifications for the real time monitoring and control systems Commissioning of the EMS, DMS systems Engineering and code development for the EMS, DMS systems that meets the high standards. Parameterization, optimization, testing of EMS, DMS systems Databases management Good technical background is required. The development of professional skills is achieved, in time, by involvement in the team activities and by trainings. Knowledge of the power systems phenomena and processes and related mathematical models (power flow, state estimator, short-circuit analysis, contingency analyst, voltage control, load-frequency control, power systems optimal regimes, load forecast, stability analysis, transient analysis, modeling of equipment and of automation and protection systems in power plants and power grids, DTS, models for the energy market) C / C ++ programmer skills or similar Exposure in Modelling of SCADA and Power System Analyst Applications Familiarity or development experience on Windows OS or UNIX OS Qualifications / Requirements Master's degree in Power Systems with 2 to 5 years of experience in the PSA Domain Troubleshooting skills Fluent in English Ability and willingness to travel Desired Characteristics Technically good performer who can integrate and test complex software systems to completion with a minimal supervision Excellent communication skills (verbal and written) Rigorous, methodical, well organized and self-disciplined Take initiatives, good trouble-shooter and autonomous Adaptability, reactivity and Availability Ability to analyze complex topics and make a verbal/written synthesis Ability and willingness to travel Network & Links Internal: Operations, Product Development, Tendering, and Maintenance & Support External: Customers, Partners Performance Measurement On Time Delivery Costs deviation + Committed budget (effort) deviation Software Delivery Processes Compliance Customer Satisfaction In collaboration with Methods & Tools Drive excellence in execution through continuous improvement and change management to implement competitiveness improvement initiatives (costs base reduction, lead time reduction, DevOps framework, productivity improvement, quality improvement…) Monitor the efforts performance measurement indicators In collaboration with Maintenance & Support Ensure a smooth transfer to maintenance of ending projects through coordinated knowledge transfer. Can be solicited to provide some back-end support to maintenance team as part of the maintenance contract Customer Management Comply and contribute to elaboration of relevant Quality Procedures, work instructions and Processes in Quality Management System Report or resolve any process non-conformances in a timely manner Health and Safety Sets the example by demonstrating the proper acts and actively observes work conditions. Routinely observes routines and behaviors of others and provides immediate feedback regarding unsafe behavior and celebrates achievements or safe behaviors. Actively and routinely promotes the identification of hazards and near misses. Additional Information Relocation Assistance Provided: Yes

JD: Electrical Engineer Job Description Summary We are seeking an experienced Electrical Engineer with expertise in industrial automation and Control systems. The candidate should have advanced skills in PLC programming, VFD, Sensors, HMI and SCADA development, Control cabinet electrical design per UL 508A, Sizing of wiring & Breakers, Heat calculation of cabinet, VBScript, and electrical knowledge in motor starters and motor control stations. Roles and Responsibilities Design, program, and configure PLCs series to automate industrial processes efficiently and reliably. Develop HMI (Human-Machine Interface) and SCADA (Supervisory Control and Data Acquisition) systems using industry-standard software. Control cabinet electrical design per UL 508A, Sizing of wiring & Breakers, Heat calculation of cabinet Strong knowledge in making electrical schematic using DraftSight / Solidwork Electrical. Create user-friendly interfaces for operators and engineers to monitor and control industrial processes. Utilize VBScript and other scripting languages to customize and optimize control systems for specific requirements. Apply extensive electrical knowledge to design and troubleshoot control systems including PID controllers, electrical schematics, motor starters, and motor control stations. Collaborate closely with cross-functional teams to gather requirements, create control system specifications, and ensure seamless integration. Troubleshoot and resolve control system issues promptly to maintain system performance. Ensure compliance with industry standards, safety regulations, and quality control procedures. Skills and Qualifications Bachelors degree in electrical engineering. 3 to 5 years of experience as Electrical Engineer in industrial automation. Expertise in PLC programming Proficiency in HMI/SCADA development using software. Extensive knowledge of electrical systems, including schematics, motor control, and power distribution. Familiarity with industrial communication protocols (e.g., Modbus, BACnet, ProFiBus, ProFiNet, Ethernet/IP). Experience with electrical schematics, P&IDs, and control panel design. Excellent problem-solving skills and the ability to troubleshoot complex control system issues. Effective communication and collaboration abilities. Desired Characteristics Established project management skills. Takes strong Initiative, highly proactive, Self-starter, result-oriented, analytical, and able to multi-task. Good at Decision making. Strong customer-focused approach. Humble: respectful, receptive, agile, eager to learn. Transparent: shares critical information, speaks with Candor and contributes constructively. Focused: Quick learner, strategically prioritizes work, committed. Demonstrated creativity and ability to lead amongst peers and be accountable for team results in order to deliver a high-quality product on time.

Build Your Career with a Fortune 500 Manufacturing Giant! We are hiring Diploma Engineers to join one of the world’s largest paint manufacturing leaders in West Bengal. If you are young, ambitious, and ready to thrive in a high-performance, technology-driven environment – this opportunity is for you! Why Join Us? Work with a Fortune 500 & Great Place to Work® Certified Organisation Exposure to cutting-edge manufacturing technology Career growth in a global industry leader Who We’re Looking For Age: Up to 24 years Education: Diploma in Mechanical / Chemical / Electronics & Communication / Electronics / Paint Technology with 60%+ marks throughout Experience: 1–4 years in relevant industry Opportunities in Multiple Functions Production – Process equipment, DCS/SCADA/PLC operations Material Management – Raw material handling, SAP/ASRS systems Quality – Analytical testing, HPLC, COD, driers Packing – Packaging machines, conveyors, EMS, automation systems Preferred Backgrounds Paint | Pharma | Chemicals | Pigments | FMCG | Bottling | Beverages | Automobiles | Allied Manufacturing How to Apply: DM your resume todayat srijita.basu@linquestglobal.com. Our recruitment team will connect with shortlisted candidates. This isn’t just a job – it’s a launchpad for your career in world-class manufacturing! Job Types: Full-time, Permanent, Fresher Pay: ₹25,000.00 - ₹34,000.00 per month Benefits: Health insurance Provident Fund Ability to commute/relocate: Midnapore, West Bengal: Reliably commute or planning to relocate before starting work (Required) Application Question(s): Please mention your date of birth Please mention your highest qualification Are you pursuing any qualification right now? Please mention your marks in Matriculation, higher Secondary, Diploma, Graduation separately Education: Diploma (Required) Experience: HPLC, COD testers, and driers: 1 year (Preferred) DCS, SCADA, HMI, or PLC systems.: 1 year (Preferred) SCADA/DCS/PLC systems: 1 year (Preferred) GRNs (Goods Receipt Notes) / SAP, ASRS, Pneumatic conveying: 1 year (Preferred) Location: Midnapore, West Bengal (Preferred) Shift availability: Day Shift (Preferred) Night Shift (Preferred) Overnight Shift (Preferred) Work Location: In person

Your role and responsibilities: In this role, you will have the opportunity to execute service work with low to medium complexity as per work instructions and in accordance with ABB standard processes, quality standards, and safety guidelines. Each day, you will plan and execute work on a first-time right approach with customers. Your responsibilities will include demonstrating a solid grasp of priorities and attentiveness within your designated duties. The work model for the role is: #LI - Onsite This role is contributing to the Process Automation Energy division in India region. You will be mainly accountable for: Delivered on-site and remote service support for ABB 800xA Automation Systems in the Oil & Gas industry, including troubleshooting, issue resolution, and field service of medium to high complexity. Identified technical issues and improvement opportunities during customer interactions, resulting in root cause analysis and recommending corrective and preventive actions. Supported brownfield service bids by providing technical authority and solutioning support during the proposal phase, including customer presentations. Ensured service readiness by preparing material lists and coordinating the availability and quality of parts, tools, and equipment. Promoted a culture of continuous improvement by documenting best practices, tracking site issues, and implementing improvements to enhance field service quality and profitability. Maintained high standards of safety and customer communication, ensuring safe execution of work and consistently improving customer satisfaction. Qualifications for the role: Have 510 years of practical experience in service engineering for ABB Symphony or 800xA systems in the Oil & Gas sector. A solid foundation in process control and instrumentation within diverse processing facilities, showcasing skills in DCS hardware and application engineering, HMI design, library creation, third-party communication, testing, and commissioning. Extensive experience with ABB System 800xA for at least 2 years; familiarity with other ABB systems like Freelance, and communication protocols such as Profibus, Modbus, and OPC would be beneficial. Skilled in executing brownfield DCS projects including application modifications, retrofits, controller migrations, and on-site commissioning. Exposure to cybersecurity solutions, virtualization, and digital technologies. Full-time diploma or degree holder in Electrical, Electronics, or Instrumentation Engineering; capable of effective communication in English (written and verbal).

Your role and responsibilities: In this role, you will have the opportunity to execute service work with low to medium complexity as per work instructions and in accordance with ABB standard processes, quality standards, and safety guidelines. Each day, you will plan and execute work with a first-time-right approach to customer service. You will also showcase your expertise by demonstrating a clear sense of urgency and ownership in your area of responsibility. This role is contributing to the Process Automation Energy Industries Division in Bangalore. Main stakeholders include customers in the Oil & Gas, Refineries, and Power Generation industries. You will be mainly accountable for: Performing onsite service of medium to high complexity on 800xA Automation systems for Power Management & Electrical control applications. Identifying and resolving technical issues through remote or onsite support. Preparing material lists needed for service activity and ensuring that all materials, parts, and equipment are available and meet quality standards. Troubleshooting equipment and process failures, recommending proactive corrective actions, and ensuring lessons learned are documented. Ensuring compliance with safety standards for field services and monitoring the safe execution of work at customer sites. Coordinating with customers to identify opportunities to improve their operations and eliminate pain points. Qualifications for the role: Full time Diploma or Graduate Degree in Electrical, Electronics, or Instrumentation Technology. Minimum 7 years of experience in Process Automation, especially in Oil & Gas, Refineries, Petrochemicals, or Power Generation. At least 2 years of hands-on experience with ABB System 800xA is mandatory. Experience with other ABB systems (Advant Master AC450, MOD300, or Freelance) is an added advantage. Experience in PMS (Power Management System), EMS, ECS, CILMS design, engineering, and commissioning. Strong expertise in Process Control Automation, including hardware & application engineering, HMI engineering, library development, 3rd party communication, testing, and commissioning. Proficiency in communication protocols such as Profibus, Modbus, OPC, IEC61850, GOOSE, IEC103, and IEC104. Experience in handling Brownfield DCS projects, including application modifications, retrofits, DCS controller migrations, and commissioning.

Job Title: Python Developer with Ignition Experience Location: Remote (EST) Time zone Experience Required: 5+ Years Employment Type: Contract Job Summary We are seeking an experienced Python Developer with Ignition (Inductive Automation) expertise to design, develop, and support scalable industrial automation and manufacturing intelligence solutions. The ideal candidate will have a strong background in Python development, experience with the Ignition SCADA platform , and a proven ability to integrate and optimize data-driven applications in industrial environments. Key Responsibilities Develop, customize, and maintain applications using Python and Ignition platform (Vision, Perspective, Designer, Gateway) . Design and implement SCADA/HMI solutions , dashboards, and reports for industrial automation projects. Integrate Ignition with external systems, PLCs, ERP/MES, and databases (SQL, Oracle, etc.). Work on real-time data acquisition, processing, and visualization using Ignition modules. Collaborate with cross-functional teams (OT/IT, automation engineers, business stakeholders) to gather requirements and deliver solutions. Ensure application scalability, reliability, and security across environments. Troubleshoot and optimize existing Ignition projects and Python-based scripts. Support deployment, testing, and production rollout of Ignition-based applications. Required Skills & Experience 5+ years of professional experience as a Python Developer. 2+ years of hands-on experience with Ignition SCADA platform (Vision, Perspective, Scripting, Gateway configuration). Strong understanding of industrial automation concepts and protocols (OPC UA, MQTT, Modbus, etc.). Proficiency in SQL databases (MySQL, SQL Server, PostgreSQL, Oracle). Experience with REST/SOAP APIs and system integrations. Strong problem-solving, debugging, and optimization skills. Familiarity with Git/Version control , CI/CD, and Agile methodologies. Good to Have (Optional) Experience with MES/ERP systems integration. Knowledge of cloud platforms (AWS, Azure, GCP) for data connectivity. Familiarity with Docker/Kubernetes for deployment. Ignition certification(s) from Inductive Automation .

Job Title: Controls Engineer Experience Required: 5 to 7 years Industry Preference: Automotive Office location: Nelamangla (very frequent travel based on project location in PAN India) Notice period: Immediate (Should be ready to start in 2-3 weeks) Job Summary We are seeking a skilled and experienced Controls Engineer to join our team. The ideal candidate will have a strong background in PLC/HMI programming, electrical drawings, and industrial automation, with hands-on experience in Mitsubishi, Siemens, and Rockwell platforms. The role involves designing, programming, troubleshooting, and commissioning control systems for projects across India, with a preference for candidates from the automotive sector. Qualifications & Skills Education: Diploma or B.E in Electrical, Electronics, or Instrumentation Engineering. Experience: Minimum 2 years of PLC/HMI programming experience (total 57 years overall work experience). Technical Skills: Strong expertise in Mitsubishi and Siemens PLC/HMI systems (mandatory). Hands-on experience with Rockwell systems (RS Logix 5000, Studio 5000, FactoryTalk View). Proficiency in reading and updating electrical drawings . Good knowledge of MS Office (Word, Excel, PowerPoint). Other Skills: Strong problem-solving and troubleshooting abilities. Excellent communication and coordination skills. Ability to work independently and manage multiple tasks. Travel Requirement: Willingness to travel anywhere in India based on project needs.

Job Description and Responsibilities: We are looking for a skilled B.E. instrumentation/industrial automation/mechatronics engineer with 4 years of hands-on SCADA Ignition/HMI/PLC programming/automation experience to oversee and optimize the manufacturing shop floor system. Python knowledge will be an added advantage. Hands-on experience with Ignition SCADA system, PLC (Rockwell/Siemens platform highly preferred) programming logics and real-time process control in an industrial manufacturing industries Good understanding of various sensors and their applications Develop, modify, and maintain the SCADA system in real time. monitoring and control Good understanding of industrial network/communication protocol Interface PLAC with HMI/SCADA system, ensuring seamless data flow and process visualization Diagnose and resolve automation-related issue, minimizing downtime Work closely with the production and maintenance team. Ability to implement, troubleshooting and maintain automation system Ensure compliance with safety standards and cybersecurity. Ability to to work independently and within in a cross-function team Knowledge of MES integration Strong analytical and problem-solving skills Good in English communication Required Skills: Ignition SCADA, SQL, OPC UA Kepware, PLC, python, MQTT Industrial automation networks (Ethernet/IP, Profinet, Devicenet, etc.), IIoT Job location: Pune, Factory-Office hybrid

Job description: CSV Validation Engineer – Pharma Project Company: Instrumentation and Control Solutions (ICS) Location: Nashik, Aurangabad Experience: 1–5 years Notice Period: Immediate to 30 days preferred Job Description Instrumentation and Control Solutions (ICS) is seeking a CSV Validation Engineer for our pharmaceutical project in Mumbai. The ideal candidate will have strong experience in Computer System Validation within a regulated GxP environment and be familiar with industry guidelines such as GAMP5 and 21 CFR Part 11. Key Responsibilities Prepare and execute validation deliverables in accordance with GAMP5 and 21 CFR Part 11 . Perform IQ/OQ/PQ and validation of manufacturing systems ( SCADA, HMI, PLC ). Conduct and document CSV activities for pharmaceutical/life sciences systems. Ensure compliance with GxP standards and regulatory requirements. Collaborate with cross-functional teams in a regulated environment. Required Skills & Experience 2–5 years of experience in CSV within pharmaceutical or life sciences projects. Hands-on knowledge of GAMP, 21 CFR Part 11, GxP, IQ/OQ/PQ . Prior experience with regulated GxP systems is mandatory. Strong documentation and compliance skills. Benefits Competitive salary based on experience. Opportunity to work on high-impact pharma projects. Collaborative and supportive work environment.

This Position reports to: Service Manager Your role and responsibilities: In this role, you will have the opportunity to execute service work with low to medium complexity as per work instructions and in accordance with ABB standard processes, quality standards, and safety guidelines. Each day, you will plan and execute work on a first-time right approach with customers. You will also showcase your expertise by displaying a clear understanding of sense of urgency and care in your own area of responsibility. This role is contributing to the Process Automation Energy division in India region. You will be mainly accountable for: Delivered on-site and remote service support for ABB 800xA Automation Systems in the Oil, Gas & Chemical industry, including troubleshooting, issue resolution, and field service of medium to high complexity. Identified technical issues and improvement opportunities during customer interactions, driving root cause analysis and recommending corrective and preventive actions. Supported brownfield service bids by providing technical authority and solutioning support during the proposal phase, including customer presentations. Ensured service readiness by preparing material lists and coordinating the availability and quality of parts, tools, and equipment. Promoted a culture of continuous improvement by documenting best practices, tracking site issues, and implementing improvements to enhance field service quality and profitability. Maintained high standards of safety and customer communication, ensuring safe execution of work and consistently improving customer satisfaction. Qualifications for the role: Possess 5-10 years of hands-on experience in service engineering for ABB Symphony or 800xA systems within the Oil, Gas & Chemical industry. Strong background in process control and instrumentation across various process plants, with expertise in DCS hardware & application engineering, HMI, library development, third-party communication, testing, and commissioning. Proven experience in ABB System 800xA (minimum 2 years); knowledge of other ABB systems like Freelance, and communication protocols such as Profibus, Modbus, and OPC is a plus. Skilled in executing brownfield DCS projects including application modifications, retrofits, controller migrations, and on-site commissioning. Exposure to cybersecurity solutions, virtualization, and digital technologies is advantageous. Full-time diploma or degree holder in Electrical, Electronics, or Instrumentation Engineering; capable of effective communication in English (written and verbal). Will be based at a customer site in Gujarat, handling service activities across two plant locations situated 120 km apart.

This Position reports to: Associate Project Manager Your role and responsibilities In this role, you will have the opportunity to act as a design authority for an engineering discipline with low to medium complexity. Each day, you will complete assignments on small projects or portions of larger projects in a cost-effective manner. You will also showcase your expertise by applying basic design thinking/design for excellence concepts in projects. This role is contributing to the Robotics & Discrete Automation in Bangalore, India. You will be mainly accountable for: Evaluating, selecting, and applying standard techniques and procedures to perform engineering assignments. Providing technical support for testing, installation, and commissioning activities. Assisting in preparing proposal/presentation of engineering projects. Utilizing checklists to perform design verification according to applicable standards and engineering guidelines. Qualifications for the role Ability to demonstrate your experience in basic robot programming preferably ABB. You must have 2 to 3years of experience in robot programming. Possess an enhanced knowledge of any robot. You are have know about applications, study applications, know the flow chart and execute the programming. You are passionate about application study around robots and provide resolution at customer site. Diploma or B.E. in Electrical and Electronics/Electronics and Electrical /Mechatronics with robot programming experience managing, handling robots from manufacturing industry. You are at ease communicating in English.

This Position reports to: Senior Engineering Manager In this role, you will have the opportunity to manage a team of designers/engineers to deliver high quality, cost effective, and timely engineering solutions to customers. Each day, you will formulate plans and allocate resources to meet the agreed contractual and financial targets. You will also showcase your expertise by initiating, coordinating, driving, and overseeing team development and continual improvement of processes and procedures to strengthen the engineering and design capability. This role is contributing to the to the Process Automation business in Energy Industries division based in Bangalore, India You will be mainly accountable for: Engineering Development & Technical Contribution: Apply standard techniques for engineering assignments, handling testing, installation, commissioning, and documentation within project scope. Sales Support & Proposal Preparation: Assist in developing proposals/presentations for engineering projects, including bill of materials, estimated engineering hours, and overall technical feasibility. Contract Management & Change Control: Support contract managers in handling changes related to scope, cost, timelines, and risk assessment, ensuring seamless project execution. Planning, Control & Risk Management: Develop work plans and cost estimates, ensure quality deliverables within budget and schedule, and conduct risk assessments to optimize project effectiveness. Customer & Stakeholder Engagement: Provide technical assistance to customers, interact with stakeholders, contractors, and teams, ensuring clear communication throughout the project lifecycle. Supply Chain & Vendor Management: Collaborate with the supply chain function to define technical requirements, evaluate supplier proposals, and approve equipment/services for project needs. Technical Leadership & Process Improvement: Share engineering best practices across projects, ensure compliance with safety and contractual regulations, and contribute to continuous process improvement. You will join a talented team, where you will be able to thrive. Qualifications for the role Minimum 12+ years of experience in engineering and commissioning of Power Management Systems (PMS), covering primary equipment monitoring, control, load shedding, load sharing, and synchronization. Experience in software development, testing, and debugging, with proficiency in Python, C++, and Object-Oriented Programming. Hands-on experience in designing substation network architecture and control system philosophy for process/power plants and Expertise in software and hardware design, testing, and implementation with various Distributed Control Systems (DCS). Working knowledge of utility communication protocols like IEC61850, OPC, Modbus, DNP3, IEC 101/104, TCP/IP, Profibus, Profinet, Fieldbus, SPA. Understanding of OT/IT convergence and cybersecurity considerations for industrial automation sys-tems. Experience in configuring controllers, protocol gateways, and data concentrators across different communication protocols. Expertise in developing HMI graphics/logics related to equipment monitoring, load management, and synchronization. Familiarity with producing engineering documents from pre-design to system testing (FAT & IFAT). Experience in multi-vendor IED engineering and commissioning in electrical protection relay applica-tions. Exposure to renewable energy projects or studies is an added advantage. Ability to work independently or under supervision, with a willingness to travel nationally and interna-tionally (30-50% travel required) and should have Valid international passport required. Engineering graduate with experience in providing technical solutions and project management.

This Position reports to: Service Manager Your role and responsibilities: In this role, you will have the opportunity to execute service work with low to medium complexity as per work instructions and in accordance with ABB standard processes, quality standards, and safety guidelines. Each day, you will plan and execute work on a first-time right approach with customers. You will also showcase your expertise by displaying a clear understanding of sense of urgency and care in your own area of responsibility. This role is contributing to the Process Automation Energy division in India region. You will be mainly accountable for: Delivered on-site and remote service support for ABB 800xA Automation Systems in the Oil, Gas & Chemical industry, including troubleshooting, issue resolution, and field service of medium to high complexity. Identified technical issues and improvement opportunities during customer interactions, driving root cause analysis and recommending corrective and preventive actions. Supported brownfield service bids by providing technical authority and solutioning support during the proposal phase, including customer presentations. Ensured service readiness by preparing material lists and coordinating the availability and quality of parts, tools, and equipment. Promoted a culture of continuous improvement by documenting best practices, tracking site issues, and implementing improvements to enhance field service quality and profitability. Maintained high standards of safety and customer communication, ensuring safe execution of work and consistently improving customer satisfaction. Qualifications for the role: Possess 5-10 years of hands-on experience in service engineering for ABB Symphony or 800xA systems within the Oil, Gas & Chemical industry. Strong background in process control and instrumentation across various process plants, with expertise in DCS hardware & application engineering, HMI, library development, third-party communication, testing, and commissioning. Proven experience in ABB System 800xA (minimum 2 years); knowledge of other ABB systems like Freelance, and communication protocols such as Profibus, Modbus, and OPC is a plus. Skilled in executing brownfield DCS projects including application modifications, retrofits, controller migrations, and on-site commissioning. Exposure to cybersecurity solutions, virtualization, and digital technologies is advantageous. Full-time diploma or degree holder in Electrical, Electronics, or Instrumentation Engineering; capable of effective communication in English (written and verbal). Will be based at a customer site in Gujarat, handling service activities across two plant locations situated 120 km apart.

This Position reports to: Sales Support Manager In this role, you will have the opportunity to support the assigned Sales organization (division and market) and customers during the proposal process. Each day, you will serve as a key technical resource in the assigned area. You will also showcase your expertise by preparing technical descriptions of the products and technology, determining costs, and preparing final documentation. This role is contributing to the Process Automation business for Energy Industries division based in Bangalore, India. You will be mainly accountable for: Preparation of technical/commercial greenfield / brownfield solution offers based on customer specification requirements, Local Business Unit and Sales organization directives. Responsible and accountable for the bid during the whole sales phase, from lead until winning the order and be the single interface towards customer / Local Divisions and ensure timely and proactive communication Use experience and understanding to add to the Bid plans and decision making along as the tendering process evolves Coordinate with procurement team and maintain support from internal and third- party suppliers and Analyze project proposals cost plans and prepare for risk review Supports the development and use of opportunity tracking tools and gathers the business requirements from the Sales team to enhance the sales processes and improve market intelligence You will join a high performing team, where you will be able to thrive. Qualifications for the role Minimum 10 years experience in bidding / Tendering for Automation (DCS /PLC/Safety PLC/Power Management Systems) solutions including cybersecurity for energy industries. Experience in handling MAC / Turnkey bids would be an added advantage. Experience from engineering and project execution is an advantage. Knowledge about market requirements and standards within the industry is positive. Knowledge of ABB automation products like 800xA / Symphony Plus will have advantage BE /B Tech (Electrical & Electronics / Electronics & Communication /Instrumentation & Control)

Job Title: Lead Member Industrial Automation & Electrical Systems Location: Bangalore Department: Engineering / Automation / Maintenance Experience Required: 1 -04Years Gender: Male Only Reports To: Engineering Manager / Technical Head Job Summary: We are seeking a dynamic and technically strong Lead Member Industrial Automation & Electrical Systems to lead and execute end-to-end automation projects involving PLC programming, robotics, HMI/SCADA systems, CNC machine integration, vision systems, and electrical maintenance. The ideal candidate will have hands-on experience in diverse industrial environments, including steel plants, CNC machines, robotic systems, and crane automation. Key Responsibilities: 1. PLC, HMI, SCADA & Control Systems Design, develop, and modify PLC logic using Siemens and Mitsubishi platforms. Implement and optimize HMI/SCADA systems for real-time process monitoring and diagnostics. Conduct I/O testing, FAT (Factory Acceptance Testing), commissioning, and control panel verification. 2. Robotics (Industrial & SCARA) Program, calibrate, and troubleshoot industrial robots: Yamaha SCARA, KUKA, Yaskawa, Inovance, Effort, and Linkhou. Perform position teaching and fine-tuning for precision and efficiency. Integrate robotics with production systems and resolve hardware/software issues. 3. Vision Systems Calibrate Basler vision cameras and adjust vision parameters as per product design. Integrate vision systems with PLCs and robotic applications to enhance quality inspection. 4. Steel Plant Automation & CNC Machines Commission automation systems for steel plants (JSW, Arjas Steel, XINDIA, Kirloskar). Design and maintain CNC electrical control systems including VFD tuning and servo controller configuration. Integrate electrical and software systems in collaboration with mechanical teams. 5. Electrical, Electronic & Mechanical Systems Design, install, and troubleshoot low/high voltage electrical panels. Maintain pneumatic, hydraulic, and electronic subsystems in CNC machines and industrial cranes. Build and commission test benches (e.g., Schneider ACB-MCH), ensuring sensor validation, communication protocol checks, and wiring verification. Troubleshoot crane control systems: Avalon, Robway, LICCON, PAT, TEREX, D-LOG, GREER. Inspect and test inverter cards, booster cards, and PCBs used in industrial and crane automation. 6. Team Leadership & Quality Practices Lead a team of engineers and technicians for testing, production, and installation. Ensure compliance with 5S, Kaizen, and continuous improvement methodologies. Deliver comprehensive documentation, training, and customer support. Key Skills & Tools: PLC & SCADA: Siemens, Mitsubishi Robotics Platforms: KUKA, Yaskawa, Effort, Linkhou, Yamaha SCARA Controllers: FANUC, Siemens, Mitsubishi VFD & Servo Drives: Tuning, Troubleshooting, Commissioning Electrical Systems: CNC, Switchgear, Field Wiring. Software Tools: HMI configuration, SCADA platforms, Robot teach pendants Technical Documentation: Electrical schematics, testing protocols, control architecture Qualifications: Bachelor's Degree or Diploma in Electrical, Electronics, Mechatronics, or Instrumentation Engineering 512 years of hands-on experience in industrial automation, robotics, and electrical maintenance Strong expertise in control systems, sensors, drives, safety protocols, and team management Contact: Jeevarathinam HR - +91-8608666969 Fayas HR - +91- 8754911487 Mail id: jeevarathinam.S@wipropari.com Fayas.k@wipropari.com

Were looking for a go-getter who understands both technical sales and customer behaviour. As a Marketing and Sales Executive, youll be driving lead generation, client acquisition, and promotional activities for automation solutions like PLCs, SCADA, HMIs, and IoT platforms. Key Responsibilities: Willingness to travel extensively as per business needs Identify and pursue new business opportunities in manufacturing, CPG, food processing, and other industrial sectors. Generate leads, set up meetings, deliver presentations, and close sales for automation products and services. Understand client requirements and work closely with technical teams to offer customized solutions. Plan and execute marketing campaigns across digital and offline channels. Create content for brochures, social media, and product decks tailored to industrial clients. Build and manage relationships with key decision-makers (plant heads, production managers, etc.). Attend industry expos, trade fairs, and technical seminars to represent the brand. Monitor competitors, pricing trends, and customer feedback to optimize sales strategy. Must be open to local, regional, and occasional national travel to visit client sites, attend meetings, provide technical support, and participate in exhibitions or trade shows. Qualifications: Bachelors degree in engineering, or Marketing, or related field 1-3 years of experience in automation, industrial sales, or B2B marketing MBA (Marketing) is a plus but not mandatory Perks: Performance-based incentives Exposure to cutting-edge automation projects Travel allowances for client visits Learning opportunities in Industry 4.0 tech Required Skills: Strong knowledge of Industrial Automation (PLC, SCADA, HMI, Sensors, IoT) Excellent communication, negotiation, and presentation skills Experience in B2B sales or industrial marketing Basic understanding of CRM tools, digital marketing, and lead nurturing Ability to work independently and hit monthly/quarterly targets

This Position reports to: R&D Senior Engineer Your role and responsibilities : In this role, you will have the opportunity to support the strategic technology direction by contributing your own ideas for identifying, proposing, and implementing innovative technology, software and solutions. Each day, you will assist the Research and Development (R&D) team by executing your assigned tasks and using technical knowledge in a structured way. You will also showcase your expertise by staying abreast of the state of the art and actively applying this knowledge. The work model for the role is: Office and site travel based on customer and project requirements (approx. 10 to 25%) This role is contributing to the MODP Business Division in Peenya - Bangalore India. You will be mainly accountable for: Continuous product development in collaboration with global R&D units. Application development & Programming in codeys, FCB, C, Ladder Motion and Servo applications, development and executions. Understanding the customer need and implementing the same. Trails at factory and site for the application proof. Internal / customer support (backend). Application support for sales. Product technical training (internal/External) Working as a reliable contributor in R&D projects. Using technical know-how in your own area of competence to solve problems. Supporting the achievement of assigned targets (quality, time, scope, cost), and raising and addressing risks. Knowing some of the key drivers for ABB in your own area and performing activities in line with the current direction. Qualifications for the role: University degree (B.Tech/B.E) in Electrical and Electronics, Electronics and Communication, Electronics and Instrumentation. Minimum of 3-6 years technical experience in working with variable frequency drives ( low voltage) or similar area. Thorough understanding of variable frequency drive working principles. Knowledge of Functional program, Ladder logic, structure text. Working or development of different application. Commissioning experience in ABB drives and ABB other products (PLC) or similar will be added advantage. Embedded programming knowledge is an advantage. Knowledge of Process know how of different industry will be added advantage. Technical and practical approach. Customer and result oriented working style.