205 High Voltage Jobs

Hiring for High Voltage (Traction) system Engineers for Bangalore Location!! Experience: 8Years - 14 Years Education: M Tech - Electrical & Power Electronics & Drives Role & responsibilities: System Engineers are basically involved in performing the Kinematic simulation of the Traction chain to check the train journey time, Energy optimization. Thermal check of the power modules/motors and electrcial sizing and specification writing for various components in the Traction chain(Transfomer, capacitors, resistors , inductors, busbars , traction motors, switchgears etc) System Engineer Specifies the electrical components of the traction drives or auxiliary converters. System Engineer Conducts Power Design Review , Participates in Design review with suppliers and component qualification. System Engineer Participates in the definition of validation tests of the power scheme with the validation engineer. Participates in complete lifecycle of project from Design RFQ's stage to validation and maintencance reliability growth of the product. Relevant candidates kindly share updated CV to naveen.kumar-n@alstomgroup.com

Handling the power distribution. Controlling/Monitoring HV/LV equipment's. Controlling /Monitoring troubleshooting of power plant. Required Candidate profile Controlling/Monitoring Instruments. Startup and testing of equipment's.

1. Supervise power plant, electrical distribution system and Power Management System (Low and High Voltage). 2. Supervise instruments and Control systems. 3. Organize, control and perform condition monitoring and troubleshooting Required Candidate profile Qualification: Engineering Graduate with HV Certification, CompEX Certification.10 minimum.Previous Experience: 10 years relevant experience with at least 3 years on power generation

Job Description: Master of Science in Electrical, Electronic, Compute, Aerospace Engineering, or equivalent program Background in industrial or automotive Detailed understanding of high-speed digital PCB routing constraints, multilayer PCB construction Experience with BGA pitch of equal or less than 0.5mm Ability to participate and leading schematic and layout design reviews Experience in Altium tool Altium library management Altium Schematic Capture. Altium PCB Layout. Experience on High power PCB design Experience on using busbar inlay PCB construction for very high current requirement Hands on wok on BMS design for automotive products IPC Standards for Symbol and Footprint creation. High complex multilayer layout design. PCB layer stack-up design. PCB design rules. PCB to Mechanical interfaces. Library and Layout review process. Gerber release process.

Diagnosing electrical problems, malfunctions and taking corrective action. Troubleshoot Process electrical equipment, automation issues that may arise due to electrical problems. Should have knowledge of LT/HT system, VFD, Starters, I-MCC.

Responsibilities Experience in handling government/industry tenders and well versed with tender methodology/bid preparation & bid submission for government/industry projects Prospect for potential new clients and turn this into increased business Technical know-how of High Voltage Substation Products and Solutions knowledge Understanding of Power Transmission business Site investigation, preparing logistics plan, Bulk materials source nearby and attending pre-bid meetings & seeking clarifications from clients Floating enquiries, collection of offers and vendor negotiation, Analysis & Price comparison, updating costing works Getting through the contract terms and conditions, liquidity damages, performance guarantee, milestone, bank guarantee requirements, payment terms and special conditions, taxes and duties To identify risk and opportunity in the proposal pricing in order to mitigate inherent risk at tender submission stage Review and monitor the progress of Tenders Coordinating with internal departments for preparation of project construction plans & schedules, staffs, manpower & equipment deployments, organization charts and method statements and infrastructure requirements Direct engagement with customers for Presentations, Negotiations, Relationship building for closing of orders and for market feedback Engaging with Sales Team for review of opportunities, offers, order lost analysis To meet KRA of Order booking & profitability as per defined budget Able to represent and resolve the tecno-commercial topics with the customers and internal partners Business Development along with Sales regions/ICB Partners to discuss the opportunities pipelines available on short- and long-term basis To prepare tender review information in order to ensure methodology, pricing and margin contingency are adequately adhered to Preparing of technical & commercial bids as per the tender requirements Preparing Rate Analysis with logical risk factor pricing Qualifications Professional with Qualification of B.E. (Electrical). Up to 2-3 years of experience. Diversity candidate preferred. Excellent communication skills to effectively explain complicated technical ideas to both technical and non-technical individuals involved in the project A forward-thinking mindset with a keen eye for emerging trends in Power Transmission industry Takes a data-driven and analytical approach to problem-solving, using quantitative and qualitative data to make well-informed decisions Candidate must have professional English written/verbal/interpersonal communication skills to communicate and interact effectively as a leader for the role and assigned responsibilities Candidate needs to critically monitor the milestones, anticipate the challenges ahead of time so that probable resolutions can be planned in advance and ensure the committed targets are delivered This role is based in Gurgaon Youll also get to visit other locations in India and beyond, so youll need to go where this journey takes you. In return, youll get the chance to work with teams impacting entire cities, countries and the shape of things to come.

JOB SUMMARY: Minimum of 7 to 10 years of experience in Design and Engineering of GIS and AIS Substations projects Should be working as Electrical Engineer with experience in Primary Engineering Design for High Voltage (HV) and Extra High Voltage (EHV) substations ranging from 380KV (Gulf experience is mandatory) . The candidate will be responsible for creating engineering deliverables related to physical layout, equipment sizing, grounding, and busbar designs in accordance with project requirements, industry standards, and client specifications. (Saudi experience is preferred) PRE-BID DESIGN: Analyze tender documents, client technical specifications, and project requirements Prepare conceptual primary layout drawings, single-line diagrams (SLDs), and equipment arrangement plans based on tender scope Develop preliminary BOQ (Bill of Quantities), equipment sizing, and quantity take-offs for major items (CTs, PTs, breakers, disconnectors, etc.) Propose optimized layout solutions considering cost, space, reliability, and constructability Collaborate with proposal and estimation teams to finalize cost-effective design solutions Provide technical inputs for bid documents, method statements, and compliance matrices Interface with OEMs/vendors for technical data, specifications, and pricing inputs Identify technical risks, deviations, and value-engineering opportunities Support clarification responses, client presentations, and technical bid evaluations EXECUTION OF CONTRACT : Prepare primary design drawings including: General Arrangement (GA) / Layouts Equipment layout plans Sectional views Cable routing diagrams Earthing layouts and details Busbar calculations and drawings HV equipment connection and interconnection details Conduct equipment sizing and selection (circuit breakers, isolators, CTs, PTs, surge arresters, etc.) Perform clearance studies (electrical & mechanical) as per IS/IEC/IEEE standards Develop and review substation grounding (earthing) design Support the preparation of bill of quantities (BOQ) and material specifications Ensure designs are compliant with relevant standards (IEC, IEEE, IS, CBIP, etc.) Coordinate with secondary design, civil, and protection teams for interface clarity Support proposal and estimation teams during bidding stages with design input Participate in design reviews, client meetings, and technical discussions

Lead and manage all electrical operations at plant/project site Ensure compliance with electrical codes, safety, and regulatory standard Approve designs, load calculations, and vendor selection Manage budgets, timelines, and electrical project scope Required Candidate profile B.E/M.E. in Electrical Engineering, 20+ years (10+ in leadership) Strong expertise in plant operations, power distribution & electrical safety. Knowledge of automation, PLC& high-voltage installation.

1. Supervise power plant, electrical distribution system and Power Management System (Low and High Voltage). 2. Supervise instruments and Control systems. 3. Organize, control and perform condition monitoring and troubleshooting Required Candidate profile Qualification: Engineering Graduate with HV Certification, CompEX Certification.10 minimum.Previous Experience: 10 years relevant experience with at least 3 years on power generation

Handling the power distribution. Controlling/Monitoring HV/LV equipment's. Controlling /Monitoring troubleshooting of power plant. Required Candidate profile Controlling/Monitoring Instruments. Startup and testing of equipment's.

Design of IGBT/Thyristor based solid state controls & Power circuit design for DC/AC Motor Controls, Magnetics for Power conversion applications, DC/DC converters, DC/AC inverters, UPS, Battery Chargers, Frequency Converters, etc, EMI/EMC Std. Required Candidate profile DO NOT CONTACT RECRUITERS DIRECTLY ,APPLY ON NAUKRI AND RECRUITERS WILL GET BACK TO YOU

Location: Vijayanagar Bengaluru (with travel across India based on project requirements) Salary: 2.5 – 3.5 LPA Experience: 2 – 4 Years Company Type: Electrical Contractor – HT & LT Projects Supervise and execute HT and LT electrical Required Candidate profile Diploma or B.E./B.Tech in Electrical Engineering. Minimum 1 years of relevant field experience. Immediate or short notice joiners preferred.

Job Description Title: Business Development Professional Job Grade: PL 11 Department: SE GT- PR SW OM-D GIS Location: Aurangabad The candidate will be responsible for driving business in domestic market by close coordination with regional sales & controlling the cost through optimized solutions while remaining aligned with strategy, commitments and goals of the organization. Responsibility: 1. Analyze the technical and contractual requirement of the tender and process required clarification 2. Coordinate with Sales & BD team to drive technical requirements 3. Engage with clients for technical clarifications / resolutions & acceptance of our standard product 4. Technical offer preparation of HV GIS system & Costing & Pricing of the offer 5. Risk assessment & mitigation 6. Coordinate with internal & external stakeholders to develop most optimized solution within the financial guidelines 7. Support sales during negotiation 8. Acquire order to meet the financial goals Qualification & Skills: 1. Degree in Electrical Engineering 2. 1 - 3 years of experience in High Voltage Gas Insulated Switchgear products & tendering for domestic market 3. Team Player 4. Customer centric & result oriented approach 5. Professional expertise in MS Office 6. Strong interpersonal and Communication Skills 7. Self-motivated, quick and assertive 8. Adaptive to changing market dynamics 9. Collaborative & Well coordinated

Job description Role & responsibilities Shall be Responsible for Design and engineering of high voltage systems / switchyards / Substation / Transmission & Distribution systems in compliance with international codes & standards Technical and commercial evaluation of bids for various electrical packages. Preparation of Key SLD and Layout drawings. Selection of Controls and Protections scheme as per project requirement Sizing of Transformers, Switchgears, GCB, Bus ducts, DG set, UPS and DC system Should lead a team and guide the team. Preferred candidate profile B.E (Electrical) Engineering graduate with 8 to 12 years of experience in design & detail engineering. Power system electrical Design and engineering of high voltage systems / switchyards / Substation Transmission & Distribution systems in compliance with international codes & standards. Preparation of equipment / system specification, single line diagrams, schematic diagrams, power systems studies, cable, earthing and lighting layout, switchyard and substation layout. Design Calculation for sizing electrical equipment and earthling calculations etc. Preparation of specification and tender evaluation and drawing review of electrical equipment's Power plant | Oil & Gas | Experience Must Immediate joiner shall be given first preference

Design of IGBT/Thyristor based solid state controls & Power circuit design for DC/AC Motor Controls, Magnetics for Power conversion applications, DC/DC converters, DC/AC inverters, UPS, Battery Chargers, Frequency Converters, etc, EMI/EMC Std. Required Candidate profile Preparation of System Design Drawings (Selection of Components, Preparation of BOMs, Power Scheme / Control Scheme, GA, Internal Layouts, Wiring Diagrams) and submission to customer for approval

Job Description Summary GE Vernova Grid Systems Integration is globally recognized for designing, manufacturing, and delivering customized High Voltage Direct Current (HVDC) solutions for utilities worldwide. With over 130 years of pioneering experience, GE offers two HVDC technologies, Line Commutated Converters (LCC) and Voltage Source Converters (VSC), to support a broad range of applications and deployable in different schemes including overhead line (point to point), back-to-back, submarine/land cable and offshore. Every HVDC solution is tailored and designed based on a project-by-project assessment of the customers' individual requirements, whether it's for connecting offshore wind generation, long distance power transmission, or energy trading between independent networks. The plant engineer is responsible to design optimized HVDC substation layouts that integrate all the required equipment considering their installation, operation, and maintenance constraints. He can intervene either during Intent To Order and/or Order To Remittance stages. He will report directly to plant engineering team leader and functionally to the project plant team leader. This individual will be responsible for system design, material selection, quantity estimation, various engineering activities associated for a project and customer technical consultations. The candidate will also ensure that the proposed solutions meet customer needs while adhering to industry standards, safety regulations, quality requirements and cost-efficiency objectives. The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role, the candidate will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. The candidate will work with GSI Global Engineering Center (GSI GEC) to coordinate with the GSI Regions / Business Lines / as per Project requirement. Job Description Roles and Responsibilities General responsibilities: Execute & analysis, design, test, or integration required to define and support systems that meet business standards and program / product requirements. Prepare and present technical data to internal and external customers. Document and communicate results of technical data generated. Participate on teams assigned to address specific organizational initiatives. Share engineering information and promote open dialogue. Prepare invention disclosures to protect the technology that provides a competitive advantage to the business. Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures. Specific Role Requirements: HV (Primary) designs for 132 kV and above GIS/AIS Substation Engineering for Grid Interconnected Renewable Energy Projects Preparation of basic Single Line Diagram, Layout Plan & Section of Overall plant, Control room building, Earthing Layout, DSLP Layout, Trench Layout etc Earthing design, Lightning design, Cable Sizing, Battery Sizing, Illumination system design, Sag Tension calculation, Short Circuit Force and Bus- bar Sizing as per IEEE/IEC or relevant global standards. Design, preparation, and review of indoor/outdoor equipment layout includes general arrangement, civil interface/civil guides drawing, and installation (erection) drawings for AIS/GIS substations. Define and review the electrical/maintenance clearances for indoor/outdoor substation areas. Design, preparation, and review of cable trenches, cable tray/ladder and conduits routing for overall substation. Design optimized substation & buildings layouts integrating all the required equipment considering their installation, operation, and maintenance constraints. Support the Civil/building services leader in preparation of HVA/C ducts routing layout, fire protection/alarms etc. related drawing. Prepare design specification of HV/MV connectors, conductors, Insulator and support project plan lead in producing procurement inquiry packages. Support conversion of project contractual documents into plant engineering requirements Support answers to client, partners & suppliers technical queries related to plant engineering. Evaluation of vendor Drawings, GTP, Calculation & Technical Specs ITO (tender) drawings, BOQ estimation, RFQ finalization & evaluation of various components, selection of equipment with best pricing options. Support projects design and gate reviews. Support continuous improvement within plant engineering discipline. Co-ordination of site & office team for execution of project Flexible and quick to learn global developments in renewable technologies and adopt. S pecialized/ Additional Competency (Optional) Competency on specialized tools like CANECO, ETAP, CDGES or equivalent FACTS integrated project applications. Qualifications / Requirements Bachelors Degree in Electrical Engineering or equivalent, from an accredited college or university with a minimum 4+ years of experience on EHV/HV Substation project engineering. Strong knowledge on High Voltage substation international standards & guidelines (IEC, CIGRE) and related equipment Proficient with Autodesk CAD tools Revit, Autodesk Construction Cloud Good understanding of onshore engineering and offshore design and requirements Basic knowledge on contract and project management, Engineering, Procurement and Construction (EPC), or Engineering equipment package (EEP) type Analytical mind, rigorous and commitment Professional English spoken and written. Essential Pre-Requisites and Deliverables To be able to work on standard IT Tools for the everyday deliverables to the level of competency expected out of the role. Exhibit Ownership, Process oriented & ability to adapt as per the dynamics. Key Competencies: Customer-Centric Approach: Ability to translate customer needs into technical solutions that are practical, cost-effective, and compliant with industry standards. Technical Expertise: Deep knowledge of electrical system design, material selection, and quantity estimation tailored for Substation projects. Project Management: Ability to manage multiple tasks & meet deadlines throughout the design and implementation phases. Safety & Compliance: Strong commitment to safety and regulatory compliance, with a focus on delivering designs that meet industry-specific standards.

Job Description Summary The Engineer Electrical Component will play a key role in supporting the sales and business development by providing technical expertise in the design of electrification solutions for the EHV/HV Substations. This individual will be responsible for system design, material selection, quantity estimation, various engineering activities associated for a project and customer technical consultations. The candidate will also ensure that the proposed solutions meet customer needs while adhering to industry standards, safety regulations, quality requirements and cost-efficiency objectives. The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role, the candidate will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. The candidate will work with GSI Global Engineering Center (GSI GEC) to coordinate with the GSI Regions Business Lines as per Project requirement. Job Description Roles and Responsibilities Specific Role Requirements: HV (Primary) designs for 132 kV and above GIS/AIS Substation Engineering for Grid Interconnected Projects Preparation of basic Single Line Diagram, Layout Plan & Section of Overall plant, Equipment control room, Earthing Layout, DSLP Layout, Trench Layout etc Earthing design, Lightning design, Cable Sizing, Battery Sizing, Illumination system design, Sag Tension calculation, Short Circuit Force and Bus- bar Sizing as per IEEE/IEC. Project related all Equipment Selection/ Sizing as per IEEE/IEC Preparation of all Distribution/Auxiliary system. Evaluation of vendor Drawings, GTP, Calculation & Technical Specs LV/MV Engineering for the collector substation, unit substation & pooling station ITO (tender) drawings, BOQ estimation, RFQ finalization & evaluation of various components, selection of equipment with best pricing options. Co-ordination and integration with Automation, Civil & MEP. Co-ordination of site & office team for execution of project Flexible and quick to learn global developments in renewable technologies and adopt. Add-on Competency (Optional) Renewable project engg i.e. Solar, On-shore Off-shore Wind, Battery Storage or hybrid HVDC/FACTS integrated project applications. Competency on specialized tools like CANECO, ETAP, CDGES or equivalent Working experience with 3D Design Tools. Qualifications Requirements Bachelors degree in electrical engineering or related field, from an accredited college or university. Minimum of 4+ years of experience in EHV/ HV Substation design. Good understanding of power system components (transformers, switchgear, protection systems) and renewable energy integration. Excellent communication skills, capable of explaining complex technical concepts to both technical and non-technical stakeholders. Strong analytical and problem-solving skills, with the ability to balance technical requirements and business needs. Ability to work collaboratively across teams and with clients. Key Competencies: Customer-Centric Approach: Ability to translate customer needs into technical solutions that are practical, cost-effective, and compliant with industry standards. Technical Expertise: Deep knowledge of electrical system design, material selection, and quantity estimation tailored for oil and gas projects. Project Management: Ability to manage multiple tasks, meet deadlines, and provide leadership throughout the design and implementation phases. Safety & Compliance: Strong commitment to safety and regulatory compliance, with a focus on delivering designs that meet industry-specific standards. This role involves enhancing the collaboration and efficiency between our global Regionssuch as North America, South America, Europe, Africa, and othersand the GSI GEC. Why we come to work: Our engineers are always up for the challenge - and were always driven to find the best solution. Our projects are unique and interesting, and youll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, youll be exposed to game-changing, diverse projects that truly allow you to play your part in the energy transition. What we offer: A key role in a dynamic, international working environment with a large degree of flexibility of work agreements, Competitive benefits, and great development opportunities - including private health insurance. Additional Information Relocation Assistance Provided: Yes Location - Hyderabad,Kolkata,Chennai,Noida

The plant engineer is responsible to design optimized HVDC substation layouts that integrate all the required equipment considering their installation, operation, and maintenance constraints. He can intervene either during Intent To Order and/or Order To Remittance stages. He will report directly to plant engineering team leader and functionally to the project plant team leader. This individual will be responsible for system design, material selection, quantity estimation, various engineering activities associated for a project and customer technical consultations. The candidate will also ensure that the proposed solutions meet customer needs while adhering to industry standards, safety regulations, quality requirements and cost-efficiency objectives. The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role, the candidate will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. The candidate will work with GSI Global Engineering Center (GSI GEC) to coordinate with the GSI Regions Business Lines as per Project requirement. Roles and Responsibilities General responsibilities: Execute & analysis, design, test, or integration required to define and support systems that meet business standards and program product requirements. Prepare and present technical data to internal and external customers. Document and communicate results of technical data generated. Participate on teams assigned to address specific organizational initiatives. Share engineering information and promote open dialogue. Prepare invention disclosures to protect the technology that provides a competitive advantage to the business. Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures. Specific Role Requirements: HV (Primary) designs for 132 kV and above GIS/AIS Substation Engineering for Grid Interconnected Renewable Energy Projects Preparation of basic Single Line Diagram, Layout Plan & Section of Overall plant, Control room building, Earthing Layout, DSLP Layout, Trench Layout etc Earthing design, Lightning design, Cable Sizing, Battery Sizing, Illumination system design, Sag Tension calculation, Short Circuit Force and Bus- bar Sizing as per IEEE/IEC or relevant global standards. Design, preparation, and review of indoor/outdoor equipment layout includes general arrangement, civil interface/civil guides drawing, and installation (erection) drawings for AIS/GIS substations. Define and review the electrical/maintenance clearances for indoor/outdoor substation areas. Design, preparation, and review of cable trenches, cable tray/ladder and conduits routing for overall substation. Design optimized substation & buildings layouts integrating all the required equipment considering their installation, operation, and maintenance constraints. Support the Civil/building services leader in preparation of HVA/C ducts routing layout, fire protection/alarms etc. related drawing. Prepare design specification of HV/MV connectors, conductors, Insulator and support project plan lead in producing procurement inquiry packages. Support conversion of project contractual documents into plant engineering requirements Support answers to client, partners & suppliers technical queries related to plant engineering. Evaluation of vendor Drawings, GTP, Calculation & Technical Specs ITO (tender) drawings, BOQ estimation, RFQ finalization & evaluation of various components, selection of equipment with best pricing options. Support projects design and gate reviews. Support continuous improvement within plant engineering discipline. Co-ordination of site & office team for execution of project Flexible and quick to learn global developments in renewable technologies and adopt. S pecialized/ Additional Competency (Optional) Competency on specialized tools like CANECO, ETAP, CDGES or equivalent FACTS integrated project applications. Qualifications Requirements Bachelors Degree in Electrical Engineering or equivalent, from an accredited college or university with a minimum 4+ years of experience on EHV/HV Substation project engineering. Strong knowledge on High Voltage substation international standards & guidelines (IEC, CIGRE) and related equipment Proficient with Autodesk CAD tools Revit, Autodesk Construction Cloud Good understanding of onshore engineering and offshore design and requirements Basic knowledge on contract and project management, Engineering, Procurement and Construction (EPC), or Engineering equipment package (EEP) type Analytical mind, rigorous and commitment Professional English spoken and written. Essential Pre-Requisites and Deliverables To be able to work on standard IT Tools for the everyday deliverables to the level of competency expected out of the role. Exhibit Ownership, Process oriented & ability to adapt as per the dynamics. Key Competencies: Customer-Centric Approach: Ability to translate customer needs into technical solutions that are practical, cost-effective, and compliant with industry standards. Technical Expertise: Deep knowledge of electrical system design, material selection, and quantity estimation tailored for Substation projects. Project Management: Ability to manage multiple tasks & meet deadlines throughout the design and implementation phases. Safety & Compliance: Strong commitment to safety and regulatory compliance, with a focus on delivering designs that meet industry-specific standards. What we offer: A key role in a dynamic, international working environment with a large degree of flexibility of work agreements, Competitive benefits, and great development opportunities - including private health insurance. Additional Information Relocation Assistance Provided: Yes

Become part of a winning team and help to deliver the Green Energy transition Job Description GE Vernova Grid Systems Integration product line is globally recognized for designing, manufacturing, and delivering customized High Voltage Direct Within this cross-centers and multicultural organization, the local plant team leader manages directly plant engineering team. He/ She reports directly to the COE Plant Engineering Leader and dotted to HVDC plant engineering manager Essential responsibilities Manage & develop local teams at local centers, Ensure proper implementation of plant engineering process, Promote local opportunities (e.g. knowledge sharing with other disciplines, with ACS local centers, close collaboration with local customers, local universities, local industry bodies when relevant) Support Continuous Improvement initiatives, Convert project contractual documents into plant engineering requirements, Define and/or control plant engineering planning for the project ensuring on-time delivery, Release plant engineering deliverables as per project planning & cost without non-conformity, Support plant engineering planning and cost estimation for the project Lead the plant engineers for the assigned project(s) (functional reports) Lead the design optimized substation & buildings layouts integrating all the required equipment considering their installation, operation, and maintenance constraints, Interface with other disciplines Answer to client, partners & suppliers technical queries related to plant engineering, Organize and perform projects design/gate reviews related to plant engineering & support other disciplines ones when required. Lead change control impacting plant engineering deliverables & activities, Support continuous improvement within plant engineering discipline Qualifications and skills Accurate knowledge of local environment & behaviors Strong knowledge on High Voltage substation international standards & guidelines (IEC, IEEE, CIGRE) and related equipment Strong knowledge on contract and project management, Engineering, Procurement and Construction (EPC), or Engineering equipment package (EEP) type Proficient with Autodesk CAD tools Revit & Navisworks Good understanding of onshore civil engineering and offshore platform design and requirements Leadership, analytical mind, rigorous and commitment, Professional English spoken and written, A bachelors degree in electrical engineering or related discipline Minimum 12 years of experience in engineering management for EPC project, ideally in primary design for substation projects Mobility required (on-site visits or client meetings ~10% of the time) The North Europe Grid System Integration (GSI) team delivers a wide range of turnkey high voltage AC and DC transmission projects to its Customers in the UK, Ireland, and Scandinavia. What we offer: A key role in a dynamic, international working environment with a large degree of flexibility of work agreements Competitive benefits, and great development opportunities - including private health insurance. Additional Information Relocation Assistance Provided: Yes

- Maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes. - Preparing specifications for purchases of electrical equipment & materials. Required Candidate profile - B.E. / B. Tech. Electrical freshers - Knowledge of electrical Engineer skills - Troubleshooting, Testing Design, Project Management, Quality Focus, etc.

Job Description Summary Become part of a winning team and help to deliver the Green Energy transition Job Description In this position, you will be mainly involved in design and engineering of SVC and STATCOM solutions in close coordination with various engineering team globally. As a key member of team, you will be responsible for designing of Flexible AC Transmission Systems (FACTS)solution for global projects & tenders. Role & Responsibility Specify and implement grid/transmission system modelling as well as SVC and STATCOM system modelling in most common simulation environment (PSCAD, PSSE). Perform the various power system studies like load flow, short circuit, transient stability and switching transients, insulation coordination, simulation of temporary and transient overvoltage stresses on equipment and surge arrester energy ratings. Developing scripts to automate execution and analysis of simulations Co-operation and working closely with the ITO (sales) team to understand and being able to find the most feasible solution that customers are seeking for. Support technical tendering, review and approve technical specifications, plans and estimations. Support in research and development tasks in the field of FACTS NPI. Organize and participate in innovation workshops, contribute in patent applications Required Qualification A bachelors degree in electrical engineering or related discipline with 5-15 years experience in power system study and modelling of electrical network. Design experience in HV and MV applications with good knowledge of electrical/power engineering. Understanding of power system analysis (e.g. system performance analysis and grid code compliance studies). Experience on simulation tools (PSCAD, DigSilent, PSS/E, ATP or similar). Strong oral and written communication skills in English Desire qualification Proficiency in PSSE simulation tools will be an added advantage. Experience in international projects with working exposure of international, national and customer specific standards in electricity. Knowledge of power electronics devices and modelling of electrical network in HV/EHV system like HVDC & FACTS.

Job Description Summary The Engineer Electrical Component will play a key role in supporting the sales and business development by providing technical expertise in the design of electrification solutions for the EHV/HV Substations. This individual will be responsible for system design, material selection, quantity estimation, various engineering activities associated for a project and customer technical consultations. The candidate will also ensure that the proposed solutions meet customer needs while adhering to industry standards, safety regulations, quality requirements and cost-efficiency objectives. The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role, the candidate will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. The candidate will work with GSI Global Engineering Center (GSI GEC) to coordinate with the GSI Regions Business Lines as per Project requirement.The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role, the candidate will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. The candidate will work with GSI Global Engineering Center (GSI GEC) to coordinate with the GSI Regions Business Lines as per Project requirement. Job Description Roles and Responsibilities Specific Role Requirements: HV (Primary) designs for 132 kV and above GIS/AIS Substation Engineering for Grid Interconnected Projects Preparation of basic Single Line Diagram, Layout Plan & Section of Overall plant, Equipment control room, Earthing Layout, DSLP Layout, Trench Layout etc Earthing design, Lightning design, Cable Sizing, Battery Sizing, Illumination system design, Sag Tension calculation, Short Circuit Force and Bus- bar Sizing as per IEEE/IEC. Project related all Equipment Selection/ Sizing as per IEEE/IEC Preparation of all Distribution/Auxiliary system. Evaluation of vendor Drawings, GTP, Calculation & Technical Specs LV/MV Engineering for the collector substation, unit substation & pooling station ITO (tender) drawings, BOQ estimation, RFQ finalization & evaluation of various components, selection of equipment with best pricing options. Co-ordination and integration with Automation, Civil & MEP. Co-ordination of site & office team for execution of project Flexible and quick to learn global developments in renewable technologies and adopt. Add-on Competency (Optional) Renewable project engg i.e. Solar, On-shore Off-shore Wind, Battery Storage or hybrid HVDC/FACTS integrated project applications. Competency on specialized tools like CANECO, ETAP, CDGES or equivalent Working experience with 3D Design Tools. Qualifications Requirements Bachelors degree in electrical engineering or related field, from an accredited college or university. Minimum of 4+ years of experience in EHV/ HV Substation design. Good understanding of power system components (transformers, switchgear, protection systems) and renewable energy integration. Excellent communication skills, capable of explaining complex technical concepts to both technical and non-technical stakeholders. Strong analytical and problem-solving skills, with the ability to balance technical requirements and business needs. Ability to work collaboratively across teams and with clients. Key Competencies: Customer-Centric Approach: Ability to translate customer needs into technical solutions that are practical, cost-effective, and compliant with industry standards. Technical Expertise: Deep knowledge of electrical system design, material selection, and quantity estimation tailored for oil and gas projects. Project Management: Ability to manage multiple tasks, meet deadlines, and provide leadership throughout the design and implementation phases. Safety & Compliance: Strong commitment to safety and regulatory compliance, with a focus on delivering designs that meet industry-specific standards.

The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role you will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. The current role is expected to deliver ITO/OTR for AC Grid projects. Strong fundamental competency on projects on EHV/HV Designs of Grid substation (AIS & GIS) is pre-requisite. General responsibilities: Execute & analysis, design, test, or integration required to define and support systems that meet business standards and program product requirements Prepare and present technical data to internal and external customers Document and communicate results of technical data generated Participate on teams assigned to address specific organizational initiatives Share engineering information and promote open dialogue Prepare invention disclosures to protect the technology that provides a competitive advantage to the business Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures Specific Role Requirements: HV (Primary) designs for 132 kV and above GIS/AIS Substation Engineering for Grid Interconnected Renewable Energy Projects Preparation of basic Single Line Diagram, Layout Plan & Section of Overall plant, Equipment control room building, Earthing Layout, DSLP Layout, Trench Layout etc Earthing design, Lightning design, Cable Sizing, Illumination system design, Sag Tension calculation, Short Circuit Force and Bus- bar Sizing as per IEEE/IEC. Calculation of Load, Battery sizing etc. Preparation of all Distribution/Auxiliary system. Evaluation of vendor Drawings, GTP, Calculation & Technical Specs LV/MV Engineering for the collector substation, unit substation & pooling station ITO (tender) drawings, BOQ estimation, RFQ finalization & evaluation of various components, selection of equipment with best pricing options. Co-ordination and integration with Automation, Civil & MEP. Co-ordination of site & office team for execution of project Flexible and quick to learn global developments in renewable technologies and adopt. Knowhow of IEEE IEC codes, safety in design/EHS aspects, AC substation industry engineering practices. Good Communication skills & capability to lead project independently along with Client handling. Team handling & development. Specialized Competency ( Optional ) Renewable project engg i.e. Solar, on-shore off-shore Wind, Battery Storage or hybrid Competency on specialized tools like CANECO, ETAP, Dialux, CDGES or equivalent tools HVDC/FACTS integrated project applications. Working experience with 3D Design Tools. Qualifications Requirements Bachelors Degree in Electrical Engineering or equivalent, from an accredited college or university with a minimum 8-12 years of experience on project engineering.

Roles and Responsibilities Specific Role Requirements: ITO Configurator (ITOC) Tool deployment : ITO Configurator tool is collaborative tendering tool use by all functions (Engineering, sourcing, proposal team) to enable to deliver an offer following our technical solutions. Provide technical support/methods and specific technical configuration to the team to enable tool usage (ACS/HVDC/FACTS). Provide functional & cross-functional support as required by region and PDG. (Functions involved engineering, proposal team and sourcing team.) Understand the engineering process Inquiry to Order (ITO) to Order to Remittance (OTR), to ensure Bill of Material Bill of Quantity (BOQ) through ITOC done Ensure region quality of data in tool. From input of Standard solution team develop and support HVDC standard solution in ITOC tool. Support for maintenance of standard solution Act as focal point for functional support, 1st and 2nd level. Support local key user and large tenders teams to use ITOC tool for all tenders. Organize the training to key users on the functional use of the tool Maintain reference/training documentation for all user categories and functions (engineering, proposal team, sourcing and constructions) Technical Support for Sales & Business Development: Provide expert technical advice during the sales process to ensure solutions align with client needs and specifications. Participate in pre-sales meetings with customers, acting as the technical lead to discuss system requirements, feasibility, and potential customizations. Collaborate with the sales team to develop competitive proposals, ensuring accurate technical descriptions, design insights, and cost-effective solutions. System Design & Engineering Lead the design of electrical systems, including power distribution networks, substations, and integration of renewable energy sources tailored Evaluation of vendor Drawings, GTP, Calculation & Technical Specs LV/MV Engineering for the plant & substation ITO (tender) drawings, BOQ estimation, RFQ finalization, evaluation of various components & selection of equipment. Co-ordination and integration with Automation, Civil & MEP. Co-ordination of site & office team for execution of project Flexible and quick to learn global developments and adopt. Material Selection & Quantity Estimation Identify and select appropriate materials and components (e.g., transformers, switchgear, protection devices, cables) that meet project requirements and industry standards. Estimate material quantities, costs, and lead times to ensure accurate budgeting and procurement for project execution. Work closely with procurement and suppliers to optimize cost and delivery schedules for selected components. Collaboration & Team Leadership Collaborate with cross-functional teams, including other engineering disciplines, proposal managers, Supply chain construction, to ensure the smooth execution of tender. Provide mentorship and technical guidance to junior engineers and design teams involved in project execution. Qualifications Requirements Bachelors degree in electrical engineering or related field, from an accredited college or university. Minimum of 8+ years of experience in EHV/ HV Substation engineering. Good understanding of power system components (transformers, switchgear, protection systems) and renewable energy integration. Strong knowledge on contract and project management, Engineering, Procurement and Construction (EPC), or Engineering equipment package (EEP) type Excellent communication skills, capable of explaining complex technical concepts to both technical and non-technical stakeholders. Strong analytical and problem-solving skills, with the ability to balance technical requirements and business needs. Ability to work collaboratively across teams and with clients. Key Competencies: Customer-Centric Approach: Ability to translate customer needs into technical solutions that are practical, cost-effective, and compliant with industry standards. Technical Expertise: Deep knowledge of electrical system design, material selection, and quantity estimation tailored for oil and gas projects. Project Management: Ability to manage multiple tasks, meet deadlines, and provide leadership throughout the design and implementation phases. Safety & Compliance: Strong commitment to safety and regulatory compliance, with a focus on delivering designs that meet industry-specific standards.

Job Description Summary The Engineer Electrical Component will play a key role in supporting the sales and business development by providing technical expertise in the design of electrification solutions for the EHV/HV Substations. This individual will be responsible for system design, material selection, quantity estimation, various engineering activities associated for a project and customer technical consultations. The candidate will also ensure that the proposed solutions meet customer needs while adhering to industry standards, safety regulations, quality requirements and cost-efficiency objectives. The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role, the candidate will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning. The candidate will work with GSI Global Engineering Center (GSI GEC) to coordinate with the GSI Regions Business Lines as per Project requirement. Job Description Roles and Responsibilities Specific Role Requirements: HV (Primary) designs for 132 kV and above GIS/AIS Substation Engineering for Grid Interconnected Projects Preparation of basic Single Line Diagram, Layout Plan & Section of Overall plant, Equipment control room, Earthing Layout, DSLP Layout, Trench Layout etc Earthing design, Lightning design, Cable Sizing, Battery Sizing, Illumination system design, Sag Tension calculation, Short Circuit Force and Bus- bar Sizing as per IEEE/IEC. Project related all Equipment Selection/ Sizing as per IEEE/IEC Preparation of all Distribution/Auxiliary system. Evaluation of vendor Drawings, GTP, Calculation & Technical Specs LV/MV Engineering for the collector substation, unit substation & pooling station ITO (tender) drawings, BOQ estimation, RFQ finalization & evaluation of various components, selection of equipment with best pricing options. Co-ordination and integration with Automation, Civil & MEP. Co-ordination of site & office team for execution of project Flexible and quick to learn global developments in renewable technologies and adopt. Renewable project engg i.e. Solar, On-shore Off-shore Wind, Battery Storage or hybrid Add-on Competency (Optional) HVDC/FACTS integrated project applications. Competency on specialized tools like CANECO, ETAP, CDGES or equivalent Working experience with 3D Design Tools. Qualifications Requirements Bachelors degree in electrical engineering or related field, from an accredited college or university. Minimum of 4+ years of experience in EHV/ HV Substation design. Good understanding of power system components (transformers, switchgear, protection systems) and renewable energy integration. Excellent communication skills, capable of explaining complex technical concepts to both technical and non-technical stakeholders. Strong analytical and problem-solving skills, with the ability to balance technical requirements and business needs. Ability to work collaboratively across teams and with clients. Key Competencies: Customer-Centric Approach: Ability to translate customer needs into technical solutions that are practical, cost-effective, and compliant with industry standards. Technical Expertise: Deep knowledge of electrical system design, material selection, and quantity estimation tailored for oil and gas projects. Project Management: Ability to manage multiple tasks, meet deadlines, and provide leadership throughout the design and implementation phases. Safety & Compliance: Strong commitment to safety and regulatory compliance, with a focus on delivering designs that meet industry-specific standards.