7 Gpib Jobs

Design of LabVIEW/Test Stand based automated Test Equipment's as per product requirement, Test software development as per the requirements (NI LabVIEW/Test Stand) Software Programming C/C++,Microcontroller,Protocols-USB,RS232,LAN,UART,CAN,RS485,GPIB Required Candidate profile Knowledge on Embedded Products Design (DACs,ADCs,Microprocessors,Microcontrollers), Testing failure troubleshooting Soldering/wiring, Schematics circuit preparation using AUTOCAD, PCB layout design.

As a highly skilled Test Engineer specializing in Automated Test Equipment (ATE) development for MTL and Crouse-Hinds series products at Eaton, your role will involve designing, developing, and implementing ATE systems. You will utilize your proficiency in VC++, LabVIEW, and Python for source code development and work with test measurement instruments using GPIB, USB, and Ethernet communication protocols. Your contributions will drive innovative testing solutions that ensure product excellence. You will collaborate with NPI, Engineering, and Quality assurance teams to define testing parameters, ensuring compliance with product requirements. Troubleshooting hardware and software issues to enhance test accuracy and system reliability will be a key responsibility. Additionally, you will analyze data, implement Kaizens for process improvement, and maintain functional metrics related to Preventive Maintenance adherence, MTTR, MTBF, and OEE. Your role will also involve defining and implementing test strategies, maintaining test equipment through regular calibration, and integrating test systems into production lines. You will identify opportunities to enhance automation in testing processes, focus on cost-effective test solutions, and provide training and support to production teams. Qualifications: - Bachelors degree in Electrical, Electronics & Instrumentation Engineering - 10-12 years of experience in developing and maintaining Automated Test Equipment (ATE) & Process control Instruments Skills: - Expertise in VC++ and LabVIEW with hands-on source code development and debugging experience - Proficiency in working with test measurement instruments using GPIB, USB, and Ethernet protocols - Understanding of hardware systems and test integration methodologies - Knowledge of industrial automation, system-level testing protocols, and industrial safety standards - Strong analytical, problem-solving, communication, and teamwork skills Stay updated on emerging technologies and testing methodologies to enhance ATE capabilities and contribute to design improvements based on test results. Conduct risk assessments for new test setups, manage version control of test software repositories, and analyze test data for process optimization and decision-making. Your role will play a crucial part in ensuring the performance and reliability of MTL and Crouse-Hinds series products at Eaton.,

As an Engineer at Eaton, you will be responsible for the maintenance and operation support of Automated Test Equipment (ATE) for MTL and Crouse-Hinds series products. Your role will involve developing VC++ source code, working with test measurement instruments utilizing GPIB, USB, and Ethernet communication protocols, and contributing to innovative testing solutions. Key Responsibilities: - Maintenance of ATE systems and Test Fixtures for Eaton's MTL and Crouse-Hinds series products. - Spare Management: Maintain and order spares required for Test Fixtures and ATEs. - Plan monthly maintenance cost, prioritize and procure spares within allocated budget. - Support 24x7, 3 shifts of production to ensure ATEs are functioning properly. - Debug test source codes using VC++. - Interface with test measurement instruments using GPIB, USB, and Ethernet communication protocols. - Perform hardware and software troubleshooting to enhance test accuracy and system reliability. - Conduct data analysis and implement Kaizens to improve testing efficiency. - Meet Functional metrics of Preventive Maintenance adherence, MTTR, MTBF, and OEE. - Document test procedures and software releases for Audits. Additional Responsibilities: - Maintenance of Test Equipment: Coordinate for regular calibration of Test and Measurement Instruments. - Test System Integration: Collaborate with hardware and software engineers to integrate test systems into production lines. - Automation Enhancement: Identify opportunities to enhance automation in testing processes. - Cost Optimization: Focus on cost-effective test solutions without compromising quality. - Training and Support: Train production teams on test equipment usage and troubleshooting. - Compliance Testing: Ensure test setups meet industry standards and regulatory requirements. - Risk Analysis: Conduct risk assessments for new test setups. - Data Management: Manage version control of test software repositories and analyze test data. - Collaboration on Design Improvements: Provide feedback to design teams based on test results. Qualifications: - Diploma / Bachelors degree in Electrical, Electronics & Mechanical Engineering. - 2-4 years of experience in developing and maintaining Automated Test Equipment (ATE) & Process control Instruments. Skills: - Experience in VC++ and LabVIEW with hands-on source code development and debugging experience. - Proficiency in interfacing and working with test measurement instruments using GPIB, USB, and Ethernet protocols. - Solid understanding of hardware systems and test integration methodologies. Preferred Skills: - SAP usage for PR process. - Analytical skills and problem-solving abilities. - Effective communication and teamwork skills.,

Job description What You'll Do Eaton is seeking a highly skilled Test Engineer specializing in Automated Test Equipment (ATE) development for MTL and Crouse-Hinds series products. The role demands proficiency in VC++, LabVIEW & Python for source code development, alongside hands-on experience with test measurement instruments utilizing GPIB, USB, and Ethernet communication protocols. Join our team and contribute to innovative testing solutions that drive product excellence. Key Responsibilities: Design, develop, and implement Automated Test Equipment (ATE) systems for Eaton's MTL and Crouse-Hinds series products. Develop and debug test source codes using VC++ and LabVIEW platforms. Interface with test measurement instruments using GPIB, USB, and Ethernet communication protocols for automated testing purposes. Collaborate with NPI, Engineering and Quality assurance teams to define testing parameters and ensure compliance with product requirements. Perform hardware (Relay based PCB, Multiplexer controller, High voltage relay cards) and software troubleshooting to enhance test accuracy and system reliability. Conduct data analysis in Breakdown log & implement Kaizens to improve testing efficiency and streamline workflows. Meet Functional metrics of Preventive Maintenance adherence, MTTR, MTBF and OEE Document test procedure, Software release for Audits. Stay updated on emerging technologies and testing methodologies to enhance ATE capabilities. Additional Responsibilities Development of Test Strategies: Define and implement test strategies to validate the performance and reliability of MTL and Crouse-Hinds series products. Maintenance of Test Equipment: Perform regular calibration and maintenance of test equipment, Test fixture to ensure accurate and consistent results. Test System Integration: Collaborate with hardware and software engineers to integrate test systems into production lines seamlessly. Automation Enhancement: Identify opportunities to enhance automation in testing processes to reduce manual intervention and improve efficiency. Cost Optimization: Focus on cost-effective test solutions without compromising quality or accuracy. Training and Support: Train production teams, new joiners on test equipment usage and troubleshooting, providing technical support as needed. Compliance Testing: Ensure that test setups meet all relevant industry standards and regulatory requirements. Risk Analysis: Conduct risk assessments for new test setups to predict and mitigate potential failures. Data Management: Manage version control of test software repositories in Server. Analyze test data to identify lags/delays, speed up and optimize processes, and support decision-making. Collaboration on Design Improvements: Provide feedback to design teams based on test results to improve product performance and manufacturability. Qualifications Bachelor's degree in Electrical, Electronics & Instrumentation Enginering 10-12 years of experience in developing and maintaining Automated Test Equipment (ATE) & Process control Instruments. Skills Expertise in VC++ and LabVIEW with significant hands-on source code development and debugging experience for product testing. Proficiency in interfacing and working with test measurement instruments using GPIB, USB, and Ethernet protocols. Solid understanding of hardware systems and test integration methodologies. Familiarity with industrial safety standards and compliance guidelines for Eaton's MTL and Crouse-Hinds series. Knowledge of industrial automation and system-level testing protocols. Strong analytical skills and problem-solving abilities. Effective communication and teamwork skills.

We are looking for a Test Automation Engineer to join our team at the Smart Infrastructure Division in Siemens Ltd., a global leader in the efficient, reliable, and intelligent transmission and distribution of electrical power. As a Test Automation Engineer, you will play a crucial role in developing and implementing test programs and procedures for in-circuit testing of electronic circuit boards using advanced systems like Flying Probe machines and ICT Multimode machines. Your responsibilities will include program and configure ICT equipment, develop adapters/fixtures/jigs for PCBA level testing, and conduct in-circuit tests to ensure the integrity and functionality of electronic components. You will be required to analyze test results, troubleshoot test failures, and collaborate with production and engineering teams to optimize test processes. Additionally, you will identify opportunities for automation and efficiency enhancement, implement corrective actions based on test findings, and document test procedures in compliance with quality standards and regulatory requirements. Your role will also involve generating test reports, communicating results to stakeholders, and leading improvement projects in the PCBA testing area. To be successful in this role, you should have a Bachelor's degree in Electronics Engineering or a related field with at least 3 years of experience in Test Automation in PCBA. Proficiency in programming languages such as LabWindows/CVI, VB.net, Python, and C/C++, as well as knowledge of Boundary scan technology and microcontrollers, is essential. Strong problem-solving skills, attention to detail, and effective communication abilities are also required. You should be a proven team player with a collaborative mindset to work closely with partners and stakeholders. Siemens is committed to diversity and equality, and we welcome applications from candidates who reflect the communities we serve. If you are passionate about shaping the future and possess the curiosity and creativity to drive innovation, we invite you to join us in building a better tomorrow.,

Experience: 2 to 3 Years Location: Bangalore Job Type: Full-time Department: Electrical Job Summary: We are seeking a motivated and detail-oriented LabVIEW Developer with strong working knowledge of SQL databases to design, develop, and maintain automated test and control systems. The role involves building data acquisition applications, integrating test hardware, and managing backend data using SQL for storage, analysis, and reporting. Key Responsibilities: Design and develop custom LabVIEW applications for data acquisition, process control, and test automation. Interface LabVIEW programs with various instruments and hardware systems using protocols like RS232, Modbus, GPIB, or TCP/IP. Integrate and manage SQL databases for storing and retrieving test and measurement data. Develop SQL queries, procedures, and reports to support production and R&D analysis. Implement robust data logging and system diagnostics through database integration. Maintain clear documentation for all developed systems including user manuals and code annotations. Collaborate with cross-functional teams including hardware, firmware, and QA for system integration. Follow software development best practices including modular programming, version control, and code reviews. Required Skills and Qualifications: Bachelors degree in Electronics, Instrumentation, Electrical, Computer Science, or a related field. 2 to 3 years of hands-on experience in LabVIEW application development. Proficient in SQL with experience in creating databases, writing queries, and handling data relationships. Experience with NI hardware such as DAQ, PXI, cRIO, or CompactDAQ systems. Good understanding of relational database concepts and integration of LabVIEW with SQL (via LabVIEW Database Connectivity Toolkit or custom scripting). Familiarity with LabVIEW development best practices, NI style guidelines, and error handling techniques. Strong debugging and troubleshooting skills. Preferred Qualifications: Experience with NI TestStand or other test automation frameworks. Familiarity with version control tools (Git, SVN, etc.). Knowledge of other programming languages like Python or C# is a plus. Experience in manufacturing or R&D environments is advantageous. CTC: As per company norms / Based on experience

Role & responsibilities 1. Design, develop, and maintain LabVIEW applications for automated testing and data acquisition systems. 2. Interface with hardware such as DAQ, sensors, actuators, and communication buses Create and manage documentation including software design, user manuals, and validation reports. 3. Work on integrating LabVIEW with third-party tools and instruments. 4. Participate in debugging, troubleshooting, and verification of test systems. 5. Collaborate with R&D, production, and quality assurance teams to deliver robust testing solutions. 6. Ensure code quality through structured programming and LabVIEW best practices. Required Skills & Qualifications: 1. Bachelors degree in Electrical/Electronics/Instrumentation Engineering or related field. 2. 3+ years of hands-on LabVIEW development experience. 3. NI LabVIEW certification (CLAD/CLD) is a plus. 4. Strong knowledge of NI hardware (DAQ, PXI, cDAQ, etc.) 5. Experience with TestStand, NI MAX, and VISA. 6. Familiarity with communication protocols: SPI, I2C, RS232, GPIB, CAN, TCP/IP. 7. Proficient in debugging, troubleshooting, and optimizing LabVIEW code.